From 641168036441aa11647d4f8be1e6ccb333fbf179 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 19 Jan 2019 19:21:43 -0600 Subject: [PATCH] Update some pins spacing --- Marlin/src/pins/pins_ALLIGATOR_R2.h | 140 ++++++++++++------------ Marlin/src/pins/pins_BIQU_B300_V1.0.h | 94 ++++++++-------- Marlin/src/pins/pins_COHESION3D_MINI.h | 106 +++++++++--------- Marlin/src/pins/pins_COHESION3D_REMIX.h | 124 ++++++++++----------- Marlin/src/pins/pins_GEN7_CUSTOM.h | 68 ++++++------ Marlin/src/pins/pins_SCOOVO_X9H.h | 138 +++++++++++------------ Marlin/src/pins/pins_SMOOTHIEBOARD.h | 70 ++++++------ Marlin/src/pins/pins_STEVAL.h | 138 +++++++++++------------ Marlin/src/pins/pins_TEENSYLU.h | 66 +++++------ 9 files changed, 468 insertions(+), 476 deletions(-) diff --git a/Marlin/src/pins/pins_ALLIGATOR_R2.h b/Marlin/src/pins/pins_ALLIGATOR_R2.h index 2eb38c0c9d..b5c5952309 100644 --- a/Marlin/src/pins/pins_ALLIGATOR_R2.h +++ b/Marlin/src/pins/pins_ALLIGATOR_R2.h @@ -29,133 +29,131 @@ #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" #endif -#define BOARD_NAME "Alligator Board R2" +#define BOARD_NAME "Alligator Board R2" // // Servos // -#define SERVO0_PIN 36 -#define SERVO1_PIN 40 -#define SERVO2_PIN 41 -#define SERVO3_PIN -1 +#define SERVO0_PIN 36 +#define SERVO1_PIN 40 +#define SERVO2_PIN 41 +#define SERVO3_PIN -1 // // Limit Switches // -#define X_MIN_PIN 33 // PC1 -#define X_MAX_PIN 34 // PC2 -#define Y_MIN_PIN 35 // PC3 -#define Y_MAX_PIN 37 // PC5 -#define Z_MIN_PIN 38 // PC6 -#define Z_MAX_PIN 39 // PC7 +#define X_MIN_PIN 33 // PC1 +#define X_MAX_PIN 34 // PC2 +#define Y_MIN_PIN 35 // PC3 +#define Y_MAX_PIN 37 // PC5 +#define Z_MIN_PIN 38 // PC6 +#define Z_MAX_PIN 39 // PC7 // // Steppers // -#define X_STEP_PIN 96 // PB24 -#define X_DIR_PIN 2 // PB25 -#define X_ENABLE_PIN 24 // PA15, motor RESET pin +#define X_STEP_PIN 96 // PB24 +#define X_DIR_PIN 2 // PB25 +#define X_ENABLE_PIN 24 // PA15, motor RESET pin -#define Y_STEP_PIN 94 // PB22 -#define Y_DIR_PIN 95 // PB23 -#define Y_ENABLE_PIN 24 // PA15, motor RESET pin +#define Y_STEP_PIN 94 // PB22 +#define Y_DIR_PIN 95 // PB23 +#define Y_ENABLE_PIN 24 // PA15, motor RESET pin -#define Z_STEP_PIN 98 // PC27 -#define Z_DIR_PIN 3 // PC28 -#define Z_ENABLE_PIN 24 // PA15, motor RESET pin +#define Z_STEP_PIN 98 // PC27 +#define Z_DIR_PIN 3 // PC28 +#define Z_ENABLE_PIN 24 // PA15, motor RESET pin -#define E0_STEP_PIN 5 // PC25 -#define E0_DIR_PIN 4 // PC26 -#define E0_ENABLE_PIN 24 // PA15, motor RESET pin +#define E0_STEP_PIN 5 // PC25 +#define E0_DIR_PIN 4 // PC26 +#define E0_ENABLE_PIN 24 // PA15, motor RESET pin -#define E1_STEP_PIN 28 // PD3 on piggy -#define E1_DIR_PIN 27 // PD2 on piggy -#define E1_ENABLE_PIN 24 // PA15, motor RESET pin +#define E1_STEP_PIN 28 // PD3 on piggy +#define E1_DIR_PIN 27 // PD2 on piggy +#define E1_ENABLE_PIN 24 // PA15, motor RESET pin -#define E2_STEP_PIN 11 // PD7 on piggy -#define E2_DIR_PIN 29 // PD6 on piggy -#define E2_ENABLE_PIN 24 // PA15, motor RESET pin +#define E2_STEP_PIN 11 // PD7 on piggy +#define E2_DIR_PIN 29 // PD6 on piggy +#define E2_ENABLE_PIN 24 // PA15, motor RESET pin -#define E3_STEP_PIN 30 // PD9 on piggy -#define E3_DIR_PIN 12 // PD8 on piggy -#define E3_ENABLE_PIN 24 // PA15, motor RESET pin +#define E3_STEP_PIN 30 // PD9 on piggy +#define E3_DIR_PIN 12 // PD8 on piggy +#define E3_ENABLE_PIN 24 // PA15, motor RESET pin // Microstepping pins - Mapping not from fastio.h (?) -#define X_MS1_PIN 99 // PC10 -#define Y_MS1_PIN 10 // PC29 -#define Z_MS1_PIN 44 // PC19 -#define E0_MS1_PIN 45 // PC18 +#define X_MS1_PIN 99 // PC10 +#define Y_MS1_PIN 10 // PC29 +#define Z_MS1_PIN 44 // PC19 +#define E0_MS1_PIN 45 // PC18 -//#define MOTOR_FAULT_PIN 22 // PB26 , motor X-Y-Z-E0 motor FAULT +//#define MOTOR_FAULT_PIN 22 // PB26 , motor X-Y-Z-E0 motor FAULT // // Temperature Sensors // -#define TEMP_0_PIN 1 // Analog Input (PA24) -#define TEMP_1_PIN 2 // Analog Input (PA23 on piggy) -#define TEMP_2_PIN 3 // Analog Input (PA22 on piggy) -#define TEMP_3_PIN 4 // Analog Input (PA6 on piggy) -#define TEMP_BED_PIN 0 // Analog Input (PA16) +#define TEMP_0_PIN 1 // Analog Input (PA24) +#define TEMP_1_PIN 2 // Analog Input (PA23 on piggy) +#define TEMP_2_PIN 3 // Analog Input (PA22 on piggy) +#define TEMP_3_PIN 4 // Analog Input (PA6 on piggy) +#define TEMP_BED_PIN 0 // Analog Input (PA16) // // Heaters / Fans // // Note that on the Due pin A0 on the board is channel 2 on the ARM chip -#define HEATER_0_PIN 68 // PA1 -#define HEATER_1_PIN 8 // PC22 on piggy -#define HEATER_2_PIN 9 // PC21 on piggy -#define HEATER_3_PIN 97 // PC20 on piggy -#define HEATER_BED_PIN 69 // PA0 +#define HEATER_0_PIN 68 // PA1 +#define HEATER_1_PIN 8 // PC22 on piggy +#define HEATER_2_PIN 9 // PC21 on piggy +#define HEATER_3_PIN 97 // PC20 on piggy +#define HEATER_BED_PIN 69 // PA0 #ifndef FAN_PIN - #define FAN_PIN 92 // PA5 + #define FAN_PIN 92 // PA5 #endif -#define FAN1_PIN 31 // PA7 +#define FAN1_PIN 31 // PA7 // // Misc. Functions // -#define SDSS 77 // PA28 -#define SD_DETECT_PIN 87 // PA29 -#define LED_RED_PIN 40 // PC8 -#define LED_GREEN_PIN 41 // PC9 +#define SDSS 77 // PA28 +#define SD_DETECT_PIN 87 // PA29 +#define LED_RED_PIN 40 // PC8 +#define LED_GREEN_PIN 41 // PC9 #define EXP_VOLTAGE_LEVEL_PIN 65 -#define SPI_CHAN_DAC 1 +#define SPI_CHAN_DAC 1 -#define DAC0_SYNC 53 // PB14 -#define DAC1_SYNC 6 // PC24 +#define DAC0_SYNC 53 // PB14 +#define DAC1_SYNC 6 // PC24 // 64K SPI EEPROM #define SPI_EEPROM -#define SPI_CHAN_EEPROM1 2 -#define SPI_EEPROM1_CS 25 // PD0 +#define SPI_CHAN_EEPROM1 2 +#define SPI_EEPROM1_CS 25 // PD0 // 2K SPI EEPROM -#define SPI_EEPROM2_CS 26 // PD1 +#define SPI_EEPROM2_CS 26 // PD1 // FLASH SPI // 32Mb -#define SPI_FLASH_CS 23 // PA14 +#define SPI_FLASH_CS 23 // PA14 // // LCD / Controller // #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define LCD_PINS_RS 18 - #define LCD_PINS_ENABLE 15 - #define LCD_PINS_D4 19 - #define BEEPER_PIN 64 + #define LCD_PINS_RS 18 + #define LCD_PINS_ENABLE 15 + #define LCD_PINS_D4 19 + #define BEEPER_PIN 64 - #define BTN_EN1 14 - #define BTN_EN2 16 - #define BTN_ENC 17 + #define BTN_EN1 14 + #define BTN_EN2 16 + #define BTN_ENC 17 - #if UI_VOLTAGE_LEVEL != 1 - #undef UI_VOLTAGE_LEVEL - #define UI_VOLTAGE_LEVEL 1 - #endif + #undef UI_VOLTAGE_LEVEL + #define UI_VOLTAGE_LEVEL 1 #endif // REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER diff --git a/Marlin/src/pins/pins_BIQU_B300_V1.0.h b/Marlin/src/pins/pins_BIQU_B300_V1.0.h index 821483db2d..810caca8d7 100644 --- a/Marlin/src/pins/pins_BIQU_B300_V1.0.h +++ b/Marlin/src/pins/pins_BIQU_B300_V1.0.h @@ -41,54 +41,51 @@ // // Limit Switches // -#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series -#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series -#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series -#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series -#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V, 1K series -#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series - +#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series +#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series +#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series +#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series +#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V, 1K series +#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series // // Steppers // -#define X_STEP_PIN P2_00 -#define X_DIR_PIN P0_05 -#define X_ENABLE_PIN P0_04 +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 #ifndef X_CS_PIN - #define X_CS_PIN P1_15 // ETH + #define X_CS_PIN P1_15 // ETH #endif - -#define Y_STEP_PIN P2_01 -#define Y_DIR_PIN P0_11 -#define Y_ENABLE_PIN P0_10 +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 #ifndef Y_CS_PIN - #define Y_CS_PIN P1_14 // ETH + #define Y_CS_PIN P1_14 // ETH #endif -#define Z_STEP_PIN P2_02 -#define Z_DIR_PIN P0_20 -#define Z_ENABLE_PIN P0_19 +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 #ifndef Z_CS_PIN - #define Z_CS_PIN P1_16 // ETH + #define Z_CS_PIN P1_16 // ETH #endif -#define E0_STEP_PIN P2_03 -#define E0_DIR_PIN P0_22 -#define E0_ENABLE_PIN P0_21 +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 #ifndef E0_CS_PIN - #define E0_CS_PIN P1_17 // ETH + #define E0_CS_PIN P1_17 // ETH #endif - // // Software SPI pins for TMC2130 stepper drivers // #if ENABLED(TMC_USE_SW_SPI) - #define TMC_SW_MOSI P0_18 // ETH - #define TMC_SW_MISO P0_17 // ETH - #define TMC_SW_SCK P0_15 // ETH + #define TMC_SW_MOSI P0_18 // ETH + #define TMC_SW_MISO P0_17 // ETH + #define TMC_SW_SCK P0_15 // ETH #endif // @@ -98,21 +95,20 @@ #define TEMP_0_PIN 1 // A0 (T0) #define TEMP_BED_PIN 0 // A1 (T1) - // // Heaters / Fans // -#define HEATER_0_PIN P2_07 -#define HEATER_BED_PIN P2_05 +#define HEATER_0_PIN P2_07 +#define HEATER_BED_PIN P2_05 #ifndef FAN_PIN - #define FAN_PIN P2_04 + #define FAN_PIN P2_04 #endif // // Unused // -//#define PIN_P2_10 P2_10 // IBOOT-1 -//#define PIN_P0_27 P0_27 // Onboard SD Detect +//#define PIN_P2_10 P2_10 // IBOOT-1 +//#define PIN_P0_27 P0_27 // Onboard SD Detect /** * LCD / Controller @@ -126,16 +122,16 @@ */ #if ENABLED(ULTRA_LCD) - #define BEEPER_PIN P1_31 // EXP1-1 + #define BEEPER_PIN P1_31 // EXP1-1 - #define BTN_EN1 P3_26 // EXP2-3 - #define BTN_EN2 P3_25 // EXP2-5 - #define BTN_ENC P1_30 // EXP1-2 + #define BTN_EN1 P3_26 // EXP2-3 + #define BTN_EN2 P3_25 // EXP2-5 + #define BTN_ENC P1_30 // EXP1-2 - #define SD_DETECT_PIN P0_27 // EXP2-7 - #define LCD_PINS_RS P0_16 // EXP1-4 - #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3 - #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5 + #define SD_DETECT_PIN P0_27 // EXP2-7 + #define LCD_PINS_RS P0_16 // EXP1-4 + #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3 + #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5 #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && DISABLED(DOGLCD) #error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU BQ111-A4" @@ -154,14 +150,12 @@ * Hardware SPI can't be used because P0_17 (MISO) is not brought out on this board. */ #if ENABLED(SDSUPPORT) - - #define SCK_PIN P0_15 // EXP1-5 - #define MISO_PIN P0_16 // EXP1-4 - #define MOSI_PIN P0_18 // EXP1-3 - #define SS_PIN P1_30 // EXP1-2 - #define SDSS SS_PIN - -#endif // SDSUPPORT + #define SCK_PIN P0_15 // EXP1-5 + #define MISO_PIN P0_16 // EXP1-4 + #define MOSI_PIN P0_18 // EXP1-3 + #define SS_PIN P1_30 // EXP1-2 + #define SDSS SS_PIN +#endif /** * PWMS diff --git a/Marlin/src/pins/pins_COHESION3D_MINI.h b/Marlin/src/pins/pins_COHESION3D_MINI.h index 649403b7bb..b1bfe318a9 100644 --- a/Marlin/src/pins/pins_COHESION3D_MINI.h +++ b/Marlin/src/pins/pins_COHESION3D_MINI.h @@ -34,53 +34,53 @@ // // Servos // -#define SERVO0_PIN P1_23 +#define SERVO0_PIN P1_23 // // Limit Switches // -#define X_MIN_PIN P1_24 // 10k pullup to 3.3V -#define X_MAX_PIN P1_25 // 10k pullup to 3.3V -#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V -#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V -#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V -#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V +#define X_MIN_PIN P1_24 // 10k pullup to 3.3V +#define X_MAX_PIN P1_25 // 10k pullup to 3.3V +#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V +#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V +#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V +#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V // // Steppers // -#define X_STEP_PIN P2_00 -#define X_DIR_PIN P0_05 -#define X_ENABLE_PIN P0_04 -#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9 +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 +#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9 -#define Y_STEP_PIN P2_01 -#define Y_DIR_PIN P0_11 -#define Y_ENABLE_PIN P0_10 -#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10 +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 +#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10 -#define Z_STEP_PIN P2_02 -#define Z_DIR_PIN P0_20 -#define Z_ENABLE_PIN P0_19 -#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11 +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 +#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11 -#define E0_STEP_PIN P2_03 -#define E0_DIR_PIN P0_22 -#define E0_ENABLE_PIN P0_21 -#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12 +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 +#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12 // // Default pins for TMC software SPI // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5 + #define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6 + #define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7 + #define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7 #endif #endif @@ -94,25 +94,25 @@ // // Heaters / Fans // -#define HEATER_BED_PIN P2_05 -#define HEATER_0_PIN P2_07 // FET 1 +#define HEATER_BED_PIN P2_05 +#define HEATER_0_PIN P2_07 // FET 1 #ifndef FAN_PIN - #define FAN_PIN P2_06 // ReMix FET 4, Mini FET 3 + #define FAN_PIN P2_06 // ReMix FET 4, Mini FET 3 #endif // // Auto fans // -#define AUTO_FAN_PIN P2_04 // FET 4 +#define AUTO_FAN_PIN P2_04 // FET 4 -#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN -#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN -#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN +#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN +#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN +#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN // // Misc. Functions // -#define LED_PIN P4_28 // Play LED +#define LED_PIN P4_28 // Play LED // // M3/M4/M5 - Spindle/Laser Control @@ -138,18 +138,18 @@ // #if ENABLED(ULTRA_LCD) - #define BEEPER_PIN P0_27 // EXP2-7 - open drain + #define BEEPER_PIN P0_27 // EXP2-7 - open drain - #define BTN_EN1 P3_26 // EXP2-5 - #define BTN_EN2 P3_25 // EXP2-3 - #define BTN_ENC P1_30 // EXP1-2 + #define BTN_EN1 P3_26 // EXP2-5 + #define BTN_EN2 P3_25 // EXP2-3 + #define BTN_ENC P1_30 // EXP1-2 - #define LCD_PINS_RS P0_16 // EXP1-4 - #define LCD_SDSS P0_28 // EXP2-4 - #define LCD_PINS_ENABLE P0_18 // EXP1-3 - #define LCD_PINS_D4 P0_15 // EXP1-5 + #define LCD_PINS_RS P0_16 // EXP1-4 + #define LCD_SDSS P0_28 // EXP2-4 + #define LCD_PINS_ENABLE P0_18 // EXP1-3 + #define LCD_PINS_D4 P0_15 // EXP1-5 - #define KILL_PIN P2_11 // EXP2-10 + #define KILL_PIN P2_11 // EXP2-10 #if ENABLED(SDSUPPORT) #error "SDSUPPORT is not currently supported by the Cohesion3D boards" @@ -160,13 +160,13 @@ // // Ethernet pins // -#define ENET_MDIO P1_17 -#define ENET_RX_ER P1_14 -#define ENET_RXD1 P1_10 -#define ENET_MOC P1_16 -#define REF_CLK P1_15 -#define ENET_RXD0 P1_09 -#define ENET_CRS P1_08 -#define ENET_TX_EN P1_04 -#define ENET_TXD0 P1_00 -#define ENET_TXD1 P1_01 +#define ENET_MDIO P1_17 +#define ENET_RX_ER P1_14 +#define ENET_RXD1 P1_10 +#define ENET_MOC P1_16 +#define REF_CLK P1_15 +#define ENET_RXD0 P1_09 +#define ENET_CRS P1_08 +#define ENET_TX_EN P1_04 +#define ENET_TXD0 P1_00 +#define ENET_TXD1 P1_01 diff --git a/Marlin/src/pins/pins_COHESION3D_REMIX.h b/Marlin/src/pins/pins_COHESION3D_REMIX.h index 23e8d21d02..7ea9e77171 100644 --- a/Marlin/src/pins/pins_COHESION3D_REMIX.h +++ b/Marlin/src/pins/pins_COHESION3D_REMIX.h @@ -34,63 +34,63 @@ // // Servos // -#define SERVO0_PIN P2_04 +#define SERVO0_PIN P2_04 // // Limit Switches // -#define X_MIN_PIN P1_24 // 10k pullup to 3.3V -#define X_MAX_PIN P1_25 // 10k pullup to 3.3V -#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V -#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V -#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V -#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V +#define X_MIN_PIN P1_24 // 10k pullup to 3.3V +#define X_MAX_PIN P1_25 // 10k pullup to 3.3V +#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V +#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V +#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V +#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V // // Steppers // -#define X_STEP_PIN P2_00 -#define X_DIR_PIN P0_05 -#define X_ENABLE_PIN P0_04 -#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9 +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 +#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9 -#define Y_STEP_PIN P2_01 -#define Y_DIR_PIN P0_11 -#define Y_ENABLE_PIN P0_10 -#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10 +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 +#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10 -#define Z_STEP_PIN P2_02 -#define Z_DIR_PIN P0_20 -#define Z_ENABLE_PIN P0_19 -#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11 +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 +#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11 -#define E0_STEP_PIN P2_03 -#define E0_DIR_PIN P0_22 -#define E0_ENABLE_PIN P0_21 -#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12 +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 +#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12 -#define E1_STEP_PIN P2_08 -#define E1_DIR_PIN P2_13 -#define E1_ENABLE_PIN P4_29 -#define E1_CS_PIN P1_01 // Ethernet Expansion - Pin 14 +#define E1_STEP_PIN P2_08 +#define E1_DIR_PIN P2_13 +#define E1_ENABLE_PIN P4_29 +#define E1_CS_PIN P1_01 // Ethernet Expansion - Pin 14 -#define E2_STEP_PIN P1_20 -#define E2_DIR_PIN P1_19 -#define E2_ENABLE_PIN P1_21 -#define E2_CS_PIN P1_18 // FET 6 +#define E2_STEP_PIN P1_20 +#define E2_DIR_PIN P1_19 +#define E2_ENABLE_PIN P1_21 +#define E2_CS_PIN P1_18 // FET 6 // // Default pins for TMC software SPI // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5 + #define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6 + #define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7 + #define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7 #endif #endif @@ -110,21 +110,21 @@ // // Heaters / Fans // -#define HEATER_BED_PIN P2_05 -#define HEATER_0_PIN P2_07 // FET 1 -#define HEATER_1_PIN P1_23 // FET 2 -#define HEATER_2_PIN P1_22 // FET 3 +#define HEATER_BED_PIN P2_05 +#define HEATER_0_PIN P2_07 // FET 1 +#define HEATER_1_PIN P1_23 // FET 2 +#define HEATER_2_PIN P1_22 // FET 3 #ifndef FAN_PIN - #define FAN_PIN P2_06 // ReMix FET 4, Mini FET 3 + #define FAN_PIN P2_06 // ReMix FET 4, Mini FET 3 #endif // // Auto fans // #if HOTENDS == 3 - #define AUTO_FAN_PIN P1_18 // FET 6 + #define AUTO_FAN_PIN P1_18 // FET 6 #else - #define AUTO_FAN_PIN P1_22 // FET 3 + #define AUTO_FAN_PIN P1_22 // FET 3 #endif #define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN #define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN @@ -133,7 +133,7 @@ // // Misc. Functions // -#define LED_PIN P4_28 // Play LED +#define LED_PIN P4_28 // Play LED // // M3/M4/M5 - Spindle/Laser Control @@ -159,19 +159,19 @@ // #if ENABLED(ULTRA_LCD) - #define BEEPER_PIN P1_31 // EXP1-1 - #define SD_DETECT_PIN P0_27 // EXP2-7 + #define BEEPER_PIN P1_31 // EXP1-1 + #define SD_DETECT_PIN P0_27 // EXP2-7 - #define BTN_EN1 P3_26 // EXP2-5 - #define BTN_EN2 P3_25 // EXP2-3 - #define BTN_ENC P1_30 // EXP1-2 + #define BTN_EN1 P3_26 // EXP2-5 + #define BTN_EN2 P3_25 // EXP2-3 + #define BTN_ENC P1_30 // EXP1-2 - #define LCD_PINS_RS P0_16 // EXP1-4 - #define LCD_SDSS P0_28 // EXP2-4 - #define LCD_PINS_ENABLE P0_18 // EXP1-3 - #define LCD_PINS_D4 P0_15 // EXP1-5 + #define LCD_PINS_RS P0_16 // EXP1-4 + #define LCD_SDSS P0_28 // EXP2-4 + #define LCD_PINS_ENABLE P0_18 // EXP1-3 + #define LCD_PINS_D4 P0_15 // EXP1-5 - #define KILL_PIN P2_11 // EXP2-10 + #define KILL_PIN P2_11 // EXP2-10 #if ENABLED(SDSUPPORT) #error "SDSUPPORT is not currently supported by the Cohesion3D boards" @@ -182,13 +182,13 @@ // // Ethernet pins // -#define ENET_MDIO P1_17 -#define ENET_RX_ER P1_14 -#define ENET_RXD1 P1_10 -#define ENET_MOC P1_16 -#define REF_CLK P1_15 -#define ENET_RXD0 P1_09 -#define ENET_CRS P1_08 -#define ENET_TX_EN P1_04 -#define ENET_TXD0 P1_00 -#define ENET_TXD1 P1_01 +#define ENET_MDIO P1_17 +#define ENET_RX_ER P1_14 +#define ENET_RXD1 P1_10 +#define ENET_MOC P1_16 +#define REF_CLK P1_15 +#define ENET_RXD0 P1_09 +#define ENET_CRS P1_08 +#define ENET_TX_EN P1_04 +#define ENET_TXD0 P1_00 +#define ENET_TXD1 P1_01 diff --git a/Marlin/src/pins/pins_GEN7_CUSTOM.h b/Marlin/src/pins/pins_GEN7_CUSTOM.h index 7d0f44d7f3..05f13abc69 100644 --- a/Marlin/src/pins/pins_GEN7_CUSTOM.h +++ b/Marlin/src/pins/pins_GEN7_CUSTOM.h @@ -63,68 +63,68 @@ // // Limit Switches // -#define X_STOP_PIN 0 -#define Y_STOP_PIN 1 -#define Z_STOP_PIN 2 +#define X_STOP_PIN 0 +#define Y_STOP_PIN 1 +#define Z_STOP_PIN 2 // // Steppers // -#define X_STEP_PIN 21 // different from standard GEN7 -#define X_DIR_PIN 20 // different from standard GEN7 -#define X_ENABLE_PIN 24 +#define X_STEP_PIN 21 // different from standard GEN7 +#define X_DIR_PIN 20 // different from standard GEN7 +#define X_ENABLE_PIN 24 -#define Y_STEP_PIN 23 -#define Y_DIR_PIN 22 -#define Y_ENABLE_PIN 24 +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 -#define Z_STEP_PIN 26 -#define Z_DIR_PIN 25 -#define Z_ENABLE_PIN 24 +#define Z_STEP_PIN 26 +#define Z_DIR_PIN 25 +#define Z_ENABLE_PIN 24 -#define E0_STEP_PIN 28 -#define E0_DIR_PIN 27 -#define E0_ENABLE_PIN 24 +#define E0_STEP_PIN 28 +#define E0_DIR_PIN 27 +#define E0_ENABLE_PIN 24 // // Temperature Sensors // -#define TEMP_0_PIN 2 // Analog Input -#define TEMP_BED_PIN 1 // Analog Input (pin 34 bed) +#define TEMP_0_PIN 2 // Analog Input +#define TEMP_BED_PIN 1 // Analog Input (pin 34 bed) // // Heaters // -#define HEATER_0_PIN 4 -#define HEATER_BED_PIN 3 // (bed) +#define HEATER_0_PIN 4 +#define HEATER_BED_PIN 3 // (bed) // // Misc. Functions // -#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support -#define PS_ON_PIN 19 -#define CASE_LIGHT_PIN 15 // MUST BE HARDWARE PWM +#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support +#define PS_ON_PIN 19 +#define CASE_LIGHT_PIN 15 // MUST BE HARDWARE PWM // A pin for debugging -#define DEBUG_PIN -1 +#define DEBUG_PIN -1 // // LCD / Controller // -#define BEEPER_PIN -1 +#define BEEPER_PIN -1 // 4bit LCD Support -#define LCD_PINS_RS 18 -#define LCD_PINS_ENABLE 17 -#define LCD_PINS_D4 16 -#define LCD_PINS_D5 15 -#define LCD_PINS_D6 13 -#define LCD_PINS_D7 14 +#define LCD_PINS_RS 18 +#define LCD_PINS_ENABLE 17 +#define LCD_PINS_D4 16 +#define LCD_PINS_D5 15 +#define LCD_PINS_D6 13 +#define LCD_PINS_D7 14 -// Buttons are directly attached -#define BTN_EN1 11 -#define BTN_EN2 10 -#define BTN_ENC 12 +// Buttons are directly attached +#define BTN_EN1 11 +#define BTN_EN2 10 +#define BTN_ENC 12 // RS485 pins //#define TX_ENABLE_PIN 12 diff --git a/Marlin/src/pins/pins_SCOOVO_X9H.h b/Marlin/src/pins/pins_SCOOVO_X9H.h index e061aec52e..3f85ec58b2 100644 --- a/Marlin/src/pins/pins_SCOOVO_X9H.h +++ b/Marlin/src/pins/pins_SCOOVO_X9H.h @@ -33,125 +33,125 @@ // // Servos // -#define SERVO0_PIN 22 // Motor header MX1 -#define SERVO1_PIN 23 // Motor header MX2 -#define SERVO2_PIN 24 // Motor header MX3 -#define SERVO3_PIN 5 // PWM header pin 5 +#define SERVO0_PIN 22 // Motor header MX1 +#define SERVO1_PIN 23 // Motor header MX2 +#define SERVO2_PIN 24 // Motor header MX3 +#define SERVO3_PIN 5 // PWM header pin 5 // // Limit Switches // -#define X_MIN_PIN 12 -#define X_MAX_PIN 24 -#define Y_MIN_PIN 11 -#define Y_MAX_PIN 23 -#define Z_MIN_PIN 10 -#define Z_MAX_PIN 30 +#define X_MIN_PIN 12 +#define X_MAX_PIN 24 +#define Y_MIN_PIN 11 +#define Y_MAX_PIN 23 +#define Z_MIN_PIN 10 +#define Z_MAX_PIN 30 // -// Z Probe (when not Z_MIN_PIN) +// Z Probe (when not Z_MIN_IN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 30 + #define Z_MIN_PROBE_PIN 30 #endif // // Steppers // -#define X_STEP_PIN 37 -#define X_DIR_PIN 48 -#define X_ENABLE_PIN 29 +#define X_STEP_PIN 37 +#define X_DIR_PIN 48 +#define X_ENABLE_PIN 29 -#define Y_STEP_PIN 36 -#define Y_DIR_PIN 49 -#define Y_ENABLE_PIN 28 +#define Y_STEP_PIN 36 +#define Y_DIR_PIN 49 +#define Y_ENABLE_PIN 28 -#define Z_STEP_PIN 35 -#define Z_DIR_PIN 47 -#define Z_ENABLE_PIN 27 +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 47 +#define Z_ENABLE_PIN 27 -#define E0_STEP_PIN 34 -#define E0_DIR_PIN 43 -#define E0_ENABLE_PIN 26 +#define E0_STEP_PIN 34 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 26 -#define E1_STEP_PIN 33 -#define E1_DIR_PIN 42 -#define E1_ENABLE_PIN 25 +#define E1_STEP_PIN 33 +#define E1_DIR_PIN 42 +#define E1_ENABLE_PIN 25 // Microstepping pins - Mapping not from fastio.h (?) -#define X_MS1_PIN 40 -#define X_MS2_PIN 41 -#define Y_MS1_PIN 69 -#define Y_MS2_PIN 39 -#define Z_MS1_PIN 68 -#define Z_MS2_PIN 67 -#define E0_MS1_PIN 65 -#define E0_MS2_PIN 66 -#define E1_MS1_PIN 63 -#define E1_MS2_PIN 64 +#define X_MS1_PIN 40 +#define X_MS2_PIN 41 +#define Y_MS1_PIN 69 +#define Y_MS2_PIN 39 +#define Z_MS1_PIN 68 +#define Z_MS2_PIN 67 +#define E0_MS1_PIN 65 +#define E0_MS2_PIN 66 +#define E1_MS1_PIN 63 +#define E1_MS2_PIN 64 -#define DIGIPOTSS_PIN 38 +#define DIGIPOTSS_PIN 38 #define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input -#define TEMP_BED_PIN 7 // Analog Input +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_BED_PIN 7 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 9 -#define HEATER_1_PIN 7 -#define HEATER_BED_PIN 3 +#define HEATER_0_PIN 9 +#define HEATER_1_PIN 7 +#define HEATER_BED_PIN 3 #ifndef FAN_PIN - #define FAN_PIN 8 + #define FAN_PIN 8 #endif -#define FAN1_PIN 6 -#define FAN2_PIN 2 +#define FAN1_PIN 6 +#define FAN2_PIN 2 // // Misc. Functions // -#define SDSS 53 -#define LED_PIN 13 -#define PS_ON_PIN 4 +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 4 #ifndef FILWIDTH_PIN - #define FILWIDTH_PIN 3 // Analog Input + #define FILWIDTH_PIN 3 // Analog Input #endif // // LCD / Controller // -#define LCD_PINS_RS 70 // Ext2_5 -#define LCD_PINS_ENABLE 71 // Ext2_7 -#define LCD_PINS_D4 72 // Ext2_9 ? -#define LCD_PINS_D5 73 // Ext2_11 ? -#define LCD_PINS_D6 74 // Ext2_13 -#define LCD_PINS_D7 75 // Ext2_15 ? -#define BEEPER_PIN -1 +#define LCD_PINS_RS 70 // Ext2_5 +#define LCD_PINS_ENABLE 71 // Ext2_7 +#define LCD_PINS_D4 72 // Ext2_9 ? +#define LCD_PINS_D5 73 // Ext2_11 ? +#define LCD_PINS_D6 74 // Ext2_13 +#define LCD_PINS_D7 75 // Ext2_15 ? +#define BEEPER_PIN -1 -#define BTN_HOME 80 // Ext_16 -#define BTN_CENTER 81 // Ext_14 -#define BTN_ENC BTN_CENTER -#define BTN_RIGHT 82 // Ext_12 -#define BTN_LEFT 83 // Ext_10 -#define BTN_UP 84 // Ext2_8 -#define BTN_DOWN 85 // Ext2_6 +#define BTN_HOME 80 // Ext_16 +#define BTN_CENTER 81 // Ext_14 +#define BTN_ENC BTN_CENTER +#define BTN_RIGHT 82 // Ext_12 +#define BTN_LEFT 83 // Ext_10 +#define BTN_UP 84 // Ext2_8 +#define BTN_DOWN 85 // Ext2_6 -#define HOME_PIN BTN_HOME +#define HOME_PIN BTN_HOME #if ENABLED(VIKI2) || ENABLED(miniVIKI) - #define BEEPER_PIN 44 + #define BEEPER_PIN 44 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 70 - #define DOGLCD_CS 71 + #define DOGLCD_A0 70 + #define DOGLCD_CS 71 #define LCD_SCREEN_ROT_180 - #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board + #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board #define STAT_LED_RED_PIN 22 #define STAT_LED_BLUE_PIN 32 diff --git a/Marlin/src/pins/pins_SMOOTHIEBOARD.h b/Marlin/src/pins/pins_SMOOTHIEBOARD.h index 7e12ec66f2..0d6e6d4498 100644 --- a/Marlin/src/pins/pins_SMOOTHIEBOARD.h +++ b/Marlin/src/pins/pins_SMOOTHIEBOARD.h @@ -38,40 +38,40 @@ // // Servos // -#define SERVO0_PIN P1_23 +#define SERVO0_PIN P1_23 // // Limit Switches // -#define X_MIN_PIN P1_24 -#define X_MAX_PIN P1_25 -#define Y_MIN_PIN P1_26 -#define Y_MAX_PIN P1_27 -#define Z_MIN_PIN P1_28 -#define Z_MAX_PIN P1_29 +#define X_MIN_PIN P1_24 +#define X_MAX_PIN P1_25 +#define Y_MIN_PIN P1_26 +#define Y_MAX_PIN P1_27 +#define Z_MIN_PIN P1_28 +#define Z_MAX_PIN P1_29 // // Steppers // -#define X_STEP_PIN P2_00 -#define X_DIR_PIN P0_05 -#define X_ENABLE_PIN P0_04 +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 -#define Y_STEP_PIN P2_01 -#define Y_DIR_PIN P0_11 -#define Y_ENABLE_PIN P0_10 +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 -#define Z_STEP_PIN P2_02 -#define Z_DIR_PIN P0_20 -#define Z_ENABLE_PIN P0_19 +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 -#define E0_STEP_PIN P2_03 -#define E0_DIR_PIN P0_22 -#define E0_ENABLE_PIN P0_21 +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 -#define E1_STEP_PIN P2_08 -#define E1_DIR_PIN P2_13 -#define E1_ENABLE_PIN P4_29 +#define E1_STEP_PIN P2_08 +#define E1_DIR_PIN P2_13 +#define E1_ENABLE_PIN P4_29 // // Temperature Sensors @@ -85,28 +85,28 @@ // // Heaters / Fans // -#define HEATER_BED_PIN P2_05 -#define HEATER_0_PIN P2_07 -#define HEATER_1_PIN P1_23 +#define HEATER_BED_PIN P2_05 +#define HEATER_0_PIN P2_07 +#define HEATER_1_PIN P1_23 #ifndef FAN_PIN - #define FAN_PIN P2_06 + #define FAN_PIN P2_06 #endif -#define FAN1_PIN P2_04 +#define FAN1_PIN P2_04 // // Display // #if ENABLED(VIKI2) || ENABLED(miniVIKI) - #define BEEPER_PIN P1_31 - //#define DOGLCD_A0 P2_06 - #define DOGLCD_CS P0_16 + #define BEEPER_PIN P1_31 + //#define DOGLCD_A0 P2_06 + #define DOGLCD_CS P0_16 - #define BTN_EN1 P3_25 - #define BTN_EN2 P3_26 - #define BTN_ENC P2_11 + #define BTN_EN1 P3_25 + #define BTN_EN2 P3_26 + #define BTN_ENC P2_11 - #define SD_DETECT_PIN P1_18 - #define SDSS P1_21 + #define SD_DETECT_PIN P1_18 + #define SDSS P1_21 #define STAT_LED_RED_PIN P1_19 #define STAT_LED_BLUE_PIN P1_20 diff --git a/Marlin/src/pins/pins_STEVAL.h b/Marlin/src/pins/pins_STEVAL.h index 21c93f49ce..c757cf0a40 100644 --- a/Marlin/src/pins/pins_STEVAL.h +++ b/Marlin/src/pins/pins_STEVAL.h @@ -33,12 +33,12 @@ // // Limit Switches // -#define X_MIN_PIN 38 // PD8 X_STOP -#define X_MAX_PIN -1 -#define Y_MIN_PIN 39 // PD9 Y_STOP -#define Y_MAX_PIN -1 -#define Z_MIN_PIN 40 // PD10 Z_STOP -#define Z_MAX_PIN -1 +#define X_MIN_PIN 38 // PD8 X_STOP +#define X_MAX_PIN -1 +#define Y_MIN_PIN 39 // PD9 Y_STOP +#define Y_MAX_PIN -1 +#define Z_MIN_PIN 40 // PD10 Z_STOP +#define Z_MAX_PIN -1 // // Z Probe (when not Z_MIN_PIN) @@ -47,102 +47,102 @@ // #define Z_MIN_PROBE_PIN 11 // PA4 // #endif -#define SCK_PIN 16 // PB13 SPI_S -#define MISO_PIN 17 // PB14 SPI_M -#define MOSI_PIN 18 // PB15 SPI_M +#define SCK_PIN 16 // PB13 SPI_S +#define MISO_PIN 17 // PB14 SPI_M +#define MOSI_PIN 18 // PB15 SPI_M // // Steppers // -#define X_STEP_PIN 60 // PE14 X_PWM -#define X_DIR_PIN 61 // PE15 X_DIR -#define X_ENABLE_PIN 59 // PE13 X_RES -#define X_CS_PIN 11 // PA4 SPI_CS +#define X_STEP_PIN 60 // PE14 X_PWM +#define X_DIR_PIN 61 // PE15 X_DIR +#define X_ENABLE_PIN 59 // PE13 X_RES +#define X_CS_PIN 11 // PA4 SPI_CS -#define Y_STEP_PIN 62 // PB10 Y_PWM -#define Y_DIR_PIN 63 // PE9 Y_DIR -#define Y_ENABLE_PIN 64 // PE10 Y_RES -#define Y_CS_PIN 11 // PA4 SPI_CS +#define Y_STEP_PIN 62 // PB10 Y_PWM +#define Y_DIR_PIN 63 // PE9 Y_DIR +#define Y_ENABLE_PIN 64 // PE10 Y_RES +#define Y_CS_PIN 11 // PA4 SPI_CS -#define Z_STEP_PIN 66 // PC6 Z_PWM -#define Z_DIR_PIN 67 // PC0 Z_DIR -#define Z_ENABLE_PIN 65 // PC15 Z_RES -#define Z_CS_PIN 11 // PA4 SPI_CS +#define Z_STEP_PIN 66 // PC6 Z_PWM +#define Z_DIR_PIN 67 // PC0 Z_DIR +#define Z_ENABLE_PIN 65 // PC15 Z_RES +#define Z_CS_PIN 11 // PA4 SPI_CS -#define E0_STEP_PIN 70 // PD12 E1_PW -#define E0_DIR_PIN 68 // PC13 E1_DIR -#define E0_ENABLE_PIN 69 // PC14 E1_RE -#define E0_CS_PIN 11 // PA4 SPI_CS +#define E0_STEP_PIN 70 // PD12 E1_PW +#define E0_DIR_PIN 68 // PC13 E1_DIR +#define E0_ENABLE_PIN 69 // PC14 E1_RE +#define E0_CS_PIN 11 // PA4 SPI_CS -#define E1_STEP_PIN 72 // PE5 E2_PWM -#define E1_DIR_PIN 73 // PE6 E2_DIR -#define E1_ENABLE_PIN 71 // PE4 E2_RESE -#define E1_CS_PIN 11 // PA4 SPI_CS +#define E1_STEP_PIN 72 // PE5 E2_PWM +#define E1_DIR_PIN 73 // PE6 E2_DIR +#define E1_ENABLE_PIN 71 // PE4 E2_RESE +#define E1_CS_PIN 11 // PA4 SPI_CS -#define E2_STEP_PIN 76 // PB8 E3_PWM -#define E2_DIR_PIN 74 // PE2 E3_DIR -#define E2_ENABLE_PIN 75 // PE3 E3_RESE -#define E2_CS_PIN 11 // PA4 SPI_CS +#define E2_STEP_PIN 76 // PB8 E3_PWM +#define E2_DIR_PIN 74 // PE2 E3_DIR +#define E2_ENABLE_PIN 75 // PE3 E3_RESE +#define E2_CS_PIN 11 // PA4 SPI_CS // // Temperature Sensors // -#define TEMP_0_PIN 52 // PA0 E1_THER -#define TEMP_1_PIN 53 // PA1 E2_THER -#define TEMP_BED_PIN 50 // PC2 BED_THE +#define TEMP_0_PIN 52 // PA0 E1_THER +#define TEMP_1_PIN 53 // PA1 E2_THER +#define TEMP_BED_PIN 50 // PC2 BED_THE // // Heaters / Fans // -#define HEATER_0_PIN 52 // PA0 E1_THER -#define HEATER_1_PIN 53 // PA1 E2_THER -#define HEATER_BED_PIN 50 // PC2 BED_THE +#define HEATER_0_PIN 52 // PA0 E1_THER +#define HEATER_1_PIN 53 // PA1 E2_THER +#define HEATER_BED_PIN 50 // PC2 BED_THE -#define FAN_PIN 56 // PC4 E1_FAN PWM pin, Part cooling fan -#define FAN1_PIN 57 // PC5 E2_FAN PWM pin, Extruder fan -#define FAN2_PIN 58 // PE8 E3_FAN PWM pin, Controller fan +#define FAN_PIN 56 // PC4 E1_FAN PWM pin, Part cooling fan +#define FAN1_PIN 57 // PC5 E2_FAN PWM pin, Extruder fan +#define FAN2_PIN 58 // PE8 E3_FAN PWM pin, Controller fan // // Misc functions // -#define SDSS 11 // PA4 SPI_CS -#define LED_PIN -1 // Heart beat -#define PS_ON_PIN -1 -#define KILL_PIN -1 -#define PWR_LOSS -1 // Power loss / nAC_FAULT +#define SDSS 11 // PA4 SPI_CS +#define LED_PIN -1 // Heart beat +#define PS_ON_PIN -1 +#define KILL_PIN -1 +#define PWR_LOSS -1 // Power loss / nAC_FAULT // // LCD / Controller // -//#define SD_DETECT_PIN 24 // PA15 SD_CA -//#define BEEPER_PIN 23 // PC9 SDIO_D1 -//#define LCD_PINS_RS 63 // PE9 Y_DIR -//#define LCD_PINS_ENABLE 58 // PE8 E3_FAN -//#define LCD_PINS_D4 15 // PB12 SPI_C -//#define LCD_PINS_D5 16 // PB13 SPI_S -//#define LCD_PINS_D6 17 // PB14 SPI_M -//#define LCD_PINS_D7 18 // PB15 SPI_M -//#define BTN_EN1 56 // PC4 E1_FAN -//#define BTN_EN2 57 // PC5 E2_FAN -//#define BTN_ENC 51 // PC3 BED_THE +//#define SD_DETECT_PIN 24 // PA15 SD_CA +//#define BEEPER_PIN 23 // PC9 SDIO_D1 +//#define LCD_PINS_RS 63 // PE9 Y_DIR +//#define LCD_PINS_ENABLE 58 // PE8 E3_FAN +//#define LCD_PINS_D4 15 // PB12 SPI_C +//#define LCD_PINS_D5 16 // PB13 SPI_S +//#define LCD_PINS_D6 17 // PB14 SPI_M +//#define LCD_PINS_D7 18 // PB15 SPI_M +//#define BTN_EN1 56 // PC4 E1_FAN +//#define BTN_EN2 57 // PC5 E2_FAN +//#define BTN_ENC 51 // PC3 BED_THE // // Filament runout detection // -//#define FIL_RUNOUT_PIN 55 // PA3 BED_THE +//#define FIL_RUNOUT_PIN 55 // PA3 BED_THE // // Extension pins // -//#define EXT0_PIN 48 // PB0 E2_HEAT -//#define EXT1_PIN 49 // PB1 E3_HEAT -//#define EXT2_PIN // PB2 -//#define EXT3_PIN 38 // PD8 X_STOP -//#define EXT4_PIN 39 // PD9 Y_STOP -//#define EXT5_PIN 40 // PD10 Z_STOP -//#define EXT6_PIN 41 // PD11 -//#define EXT7_PIN 70 // PD12 E1_PW -//#define EXT8_PIN 62 // PB10 Y_PWM -//#define EXT9_PIN // PB11 +//#define EXT0_PIN 48 // PB0 E2_HEAT +//#define EXT1_PIN 49 // PB1 E3_HEAT +//#define EXT2_PIN // PB2 +//#define EXT3_PIN 38 // PD8 X_STOP +//#define EXT4_PIN 39 // PD9 Y_STOP +//#define EXT5_PIN 40 // PD10 Z_STOP +//#define EXT6_PIN 41 // PD11 +//#define EXT7_PIN 70 // PD12 E1_PW +//#define EXT8_PIN 62 // PB10 Y_PWM +//#define EXT9_PIN // PB11 diff --git a/Marlin/src/pins/pins_TEENSYLU.h b/Marlin/src/pins/pins_TEENSYLU.h index 13002607ac..79faefc1d9 100755 --- a/Marlin/src/pins/pins_TEENSYLU.h +++ b/Marlin/src/pins/pins_TEENSYLU.h @@ -82,76 +82,76 @@ // // Limit Switch definitions that match the SCHEMATIC // -//#define X_STOP_PIN 25 // B5 -//#define Y_STOP_PIN 26 // B6 -//#define Z_STOP_PIN 27 // B7 -//#define E_STOP_PIN 36 // E4 +//#define X_STOP_PIN 25 // B5 +//#define Y_STOP_PIN 26 // B6 +//#define Z_STOP_PIN 27 // B7 +//#define E_STOP_PIN 36 // E4 // // Limit Switch definitions that match the SILKSCREEN // -#define X_STOP_PIN 26 // B6 -#define Y_STOP_PIN 27 // B7 -#define Z_STOP_PIN 36 // E4 -//#define E_STOP_PIN 25 // B5 +#define X_STOP_PIN 26 // B6 +#define Y_STOP_PIN 27 // B7 +#define Z_STOP_PIN 36 // E4 +//#define E_STOP_PIN 25 // B5 // // Steppers // -#define X_STEP_PIN 28 // A0 -#define X_DIR_PIN 29 // A1 -#define X_ENABLE_PIN 19 // E7 +#define X_STEP_PIN 28 // A0 +#define X_DIR_PIN 29 // A1 +#define X_ENABLE_PIN 19 // E7 -#define Y_STEP_PIN 30 // A2 -#define Y_DIR_PIN 31 // A3 -#define Y_ENABLE_PIN 18 // E6 +#define Y_STEP_PIN 30 // A2 +#define Y_DIR_PIN 31 // A3 +#define Y_ENABLE_PIN 18 // E6 -#define Z_STEP_PIN 32 // A4 -#define Z_DIR_PIN 33 // A5 -#define Z_ENABLE_PIN 17 // C7 +#define Z_STEP_PIN 32 // A4 +#define Z_DIR_PIN 33 // A5 +#define Z_ENABLE_PIN 17 // C7 -#define E0_STEP_PIN 34 // A6 -#define E0_DIR_PIN 35 // A7 -#define E0_ENABLE_PIN 13 // C3 +#define E0_STEP_PIN 34 // A6 +#define E0_DIR_PIN 35 // A7 +#define E0_ENABLE_PIN 13 // C3 // // Temperature Sensors // -#define TEMP_0_PIN 7 // Analog Input (Extruder) -#define TEMP_BED_PIN 6 // Analog Input (Bed) +#define TEMP_0_PIN 7 // Analog Input (Extruder) +#define TEMP_BED_PIN 6 // Analog Input (Bed) // // Heaters / Fans // -#define HEATER_0_PIN 15 // C5 PWM3B - Extruder -#define HEATER_BED_PIN 14 // C4 PWM3C +#define HEATER_0_PIN 15 // C5 PWM3B - Extruder +#define HEATER_BED_PIN 14 // C4 PWM3C #ifndef FAN_PIN - #define FAN_PIN 16 // C6 PWM3A + #define FAN_PIN 16 // C6 PWM3A #endif // // Misc. Functions // -#define SDSS 20 // B0 JP31-6 -#define CASE_LIGHT_PIN 0 // D0 IO-14 PWM0B +#define SDSS 20 // B0 JP31-6 +#define CASE_LIGHT_PIN 0 // D0 IO-14 PWM0B // // LCD / Controller // #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) - #define BEEPER_PIN -1 + #define BEEPER_PIN -1 #if ENABLED(LCD_I2C_PANELOLU2) - #define BTN_EN1 3 // D3 IO-8 - #define BTN_EN2 2 // D2 IO-10 - #define BTN_ENC 41 // F3 IO-7 - #define SDSS 38 // F0 IO-13 use SD card on Panelolu2 + #define BTN_EN1 3 // D3 IO-8 + #define BTN_EN2 2 // D2 IO-10 + #define BTN_ENC 41 // F3 IO-7 + #define SDSS 38 // F0 IO-13 use SD card on Panelolu2 #endif - #define SD_DETECT_PIN -1 + #define SD_DETECT_PIN -1 #endif // ULTRA_LCD && NEWPANEL