From 674deaf2237b586a5f15e4517034aa9088a2f0e7 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Fri, 15 Dec 2017 16:22:46 -0600
Subject: [PATCH] Add NANODLP_ALL_AXIS to config examples

---
 Marlin/src/config/default/Configuration_adv.h            | 9 ++++++---
 .../examples/AlephObjects/TAZ4/Configuration_adv.h       | 9 ++++++---
 Marlin/src/config/examples/Anet/A6/Configuration_adv.h   | 9 ++++++---
 Marlin/src/config/examples/Anet/A8/Configuration_adv.h   | 9 ++++++---
 .../src/config/examples/Azteeg/X5GT/Configuration_adv.h  | 9 ++++++---
 .../src/config/examples/BQ/Hephestos/Configuration_adv.h | 9 ++++++---
 .../config/examples/BQ/Hephestos_2/Configuration_adv.h   | 9 ++++++---
 Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h | 9 ++++++---
 Marlin/src/config/examples/Cartesio/Configuration_adv.h  | 9 ++++++---
 .../config/examples/Creality/CR-10/Configuration_adv.h   | 9 ++++++---
 Marlin/src/config/examples/Felix/Configuration_adv.h     | 9 ++++++---
 .../examples/FolgerTech/i3-2020/Configuration_adv.h      | 9 ++++++---
 .../config/examples/Infitary/i3-M508/Configuration_adv.h | 9 ++++++---
 .../src/config/examples/MakerParts/Configuration_adv.h   | 9 ++++++---
 .../src/config/examples/Malyan/M150/Configuration_adv.h  | 9 ++++++---
 .../src/config/examples/Malyan/M200/Configuration_adv.h  | 9 ++++++---
 .../examples/Micromake/C1/enhanced/Configuration_adv.h   | 9 ++++++---
 Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h | 9 ++++++---
 Marlin/src/config/examples/RigidBot/Configuration_adv.h  | 9 ++++++---
 Marlin/src/config/examples/SCARA/Configuration_adv.h     | 9 ++++++---
 .../src/config/examples/Sanguinololu/Configuration_adv.h | 9 ++++++---
 Marlin/src/config/examples/TinyBoy2/Configuration_adv.h  | 9 ++++++---
 .../examples/UltiMachine/Archim2/Configuration_adv.h     | 9 ++++++---
 .../config/examples/Velleman/K8200/Configuration_adv.h   | 9 ++++++---
 .../config/examples/Velleman/K8400/Configuration_adv.h   | 9 ++++++---
 .../examples/Wanhao/Duplicator 6/Configuration_adv.h     | 9 ++++++---
 .../delta/FLSUN/auto_calibrate/Configuration_adv.h       | 9 ++++++---
 .../examples/delta/FLSUN/kossel_mini/Configuration_adv.h | 9 ++++++---
 .../config/examples/delta/generic/Configuration_adv.h    | 9 ++++++---
 .../examples/delta/kossel_mini/Configuration_adv.h       | 9 ++++++---
 .../config/examples/delta/kossel_pro/Configuration_adv.h | 9 ++++++---
 .../config/examples/delta/kossel_xl/Configuration_adv.h  | 9 ++++++---
 .../config/examples/gCreate/gMax1.5+/Configuration_adv.h | 9 ++++++---
 Marlin/src/config/examples/makibox/Configuration_adv.h   | 9 ++++++---
 .../config/examples/tvrrug/Round2/Configuration_adv.h    | 9 ++++++---
 Marlin/src/config/examples/wt150/Configuration_adv.h     | 9 ++++++---
 36 files changed, 216 insertions(+), 108 deletions(-)

diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index dbbbb35c2cc..5cc22a7bbe9 100644
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -1541,13 +1541,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 45cbf73810e..25ccd7993ee 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -1541,13 +1541,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index 101f5b8fda5..d06a29e84da 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -1541,13 +1541,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index 431423fd95f..fc354ed28fb 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -1541,13 +1541,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
index 6a1b1efdc67..d8b21565c93 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
@@ -1542,13 +1542,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index 1193666ed43..98f36de15b1 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -1541,13 +1541,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index e15b5a4cb21..06269f9efb3 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -1541,13 +1541,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index 1193666ed43..98f36de15b1 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -1541,13 +1541,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index 22820e28351..d6f17a8e0e3 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -1541,13 +1541,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index 97d6150fda5..0ece5f76afe 100644
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -1544,13 +1544,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index 95058749e19..fdcbd485dde 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -1541,13 +1541,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 16b2b3601dd..b7db7b8b207 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -1550,13 +1550,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index 26953202fc7..491aa299400 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -1541,13 +1541,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
index 1b298ba902d..508b074404a 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
@@ -1513,13 +1513,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index 2e007134da1..aa719934d53 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -1538,13 +1538,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
index 7d72264184d..e8c5330c616 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
@@ -1541,13 +1541,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index dfe612f5162..bd3317ad7d0 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -1542,13 +1542,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index ca308dc0b95..eb5e9ecdd40 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -1549,13 +1549,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
index b06285dc756..d0a3d8a60a6 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
@@ -1541,13 +1541,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index e26aadb977a..64a3f125ecc 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -1541,13 +1541,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index 5207eb05cd9..3c436971371 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -1530,13 +1530,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index dbe62fff163..132d2c09be7 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -1541,13 +1541,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 04b900c621e..5695802cf52 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -1541,13 +1541,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index 67acc7ce2b5..13692f53649 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -1552,13 +1552,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
index 67d89b443d0..02b4b43c787 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
@@ -1542,13 +1542,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 24d3129c46f..0af632b5c90 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -1543,13 +1543,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index b13c0ad5e0c..d9dd3e2f48b 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -1543,13 +1543,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 867fd416b4f..50eb752bc4b 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -1543,13 +1543,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index 867fd416b4f..50eb752bc4b 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -1543,13 +1543,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index 867fd416b4f..50eb752bc4b 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -1543,13 +1543,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
index 3a7a6566e78..5d6afd5057c 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
@@ -1548,13 +1548,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index e380ac49921..53a0c1eee2f 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -1543,13 +1543,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 905f707034b..9a044934863 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -1542,13 +1542,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index 68e6858476d..1f84dfd86da 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -1541,13 +1541,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
index edfc349f9ee..3c8f5f0444d 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -1541,13 +1541,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index 93f2b2f1133..396fbeba0d8 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -1542,13 +1542,16 @@
 #endif
 
 /**
- * NanoDLP Synch support
+ * NanoDLP Sync support
  *
  * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
- *
  */
- //#define NANODLP_Z_SYNC
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H