3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-27 13:56:24 +00:00
Code Issues Releases Wiki Activity

Rework buzzing (PR#2296)

Browse Source 
by:
Moving HAS_LCD_BUZZ macro to Coditionals.h
Renaming HAS_LCD_BUZZ to HAS_BUZZER to make clear is has nothing to do with the lcd.
Removing the ULTRALCD condition.

Moving declaration of lcd_buzz() out of the ULTRA_LCD block in ultralcd.h
Moving definition of lcd_buzz() out of the ULTIPANEL block in ultralcd.cpp
Renaming lcd_buzz() to buzz() to make clear is has nothing to do with the lcd.

All buzzing code is now only dependent on the existence of a BEEPER-pin or the definition of a LCD_USE_I2C_BUZZER.

To do: Check the conditions for the BEEPER-pin in all pin-files.
This commit is contained in:
AnHardt 2015-06-15 00:12:02 +02:00 committed by Richard Wackerbarth
parent 29122db2fa
commit 6ab7b560af
4 changed files with 22 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/Conditionals.h
View File

@ -504,5 +504,7 @@
#define WRITE_FAN(v) WRITE(FAN_PIN, v)
#endif
#define HAS_BUZZER ((defined(BEEPER) && BEEPER >= 0) || defined(LCD_USE_I2C_BUZZER))
#endif //CONFIGURATION_LCD
#endif //CONDITIONALS_H

15
Marlin/Marlin_main.cpp
View File

@ -36,7 +36,6 @@
#endif
#endif // ENABLE_AUTO_BED_LEVELING
#define HAS_LCD_BUZZ (defined(ULTRA_LCD) || (defined(BEEPER) && BEEPER >= 0) || defined(LCD_USE_I2C_BUZZER))
#define SERVO_LEVELING (defined(ENABLE_AUTO_BED_LEVELING) && PROBE_SERVO_DEACTIVATION_DELAY > 0)
#ifdef MESH_BED_LEVELING
@ -4349,7 +4348,7 @@ inline void gcode_M226() {
#endif // NUM_SERVOS > 0
#if HAS_LCD_BUZZ
#if HAS_BUZZER
/**
* M300: Play beep sound S<frequency Hz> P<duration ms>
@ -4358,10 +4357,10 @@ inline void gcode_M226() {
uint16_t beepS = code_seen('S') ? code_value_short() : 110;
uint32_t beepP = code_seen('P') ? code_value_long() : 1000;
if (beepP > 5000) beepP = 5000; // limit to 5 seconds
lcd_buzz(beepP, beepS);
buzz(beepP, beepS);
}
#endif // HAS_LCD_BUZZ
#endif // HAS_BUZZER
#ifdef PIDTEMP
@ -4791,7 +4790,7 @@ inline void gcode_M428() {
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM(MSG_ERR_M428_TOO_FAR);
LCD_ALERTMESSAGEPGM("Err: Too far!");
#if HAS_LCD_BUZZ
#if HAS_BUZZER
enqueuecommands_P(PSTR("M300 S40 P200"));
#endif
err = true;
@ -4805,7 +4804,7 @@ inline void gcode_M428() {
memcpy(home_offset, new_offs, sizeof(new_offs));
sync_plan_position();
LCD_ALERTMESSAGEPGM("Offset applied.");
#if HAS_LCD_BUZZ
#if HAS_BUZZER
enqueuecommands_P(PSTR("M300 S659 P200\nM300 S698 P200"));
#endif
}
@ -5607,11 +5606,11 @@ void process_next_command() {
break;
#endif // NUM_SERVOS > 0
#if HAS_LCD_BUZZ
#if HAS_BUZZER
case 300: // M300 - Play beep tone
gcode_M300();
break;
#endif // HAS_LCD_BUZZ
#endif // HAS_BUZZER
#ifdef PIDTEMP
case 301: // M301

16
Marlin/ultralcd.cpp
View File

@ -1313,7 +1313,7 @@ void lcd_quick_feedback() {
#ifndef LCD_FEEDBACK_FREQUENCY_DURATION_MS
#define LCD_FEEDBACK_FREQUENCY_DURATION_MS (1000/6)
#endif
lcd_buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ);
buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ);
#elif defined(BEEPER) && BEEPER >= 0
#ifndef LCD_FEEDBACK_FREQUENCY_HZ
#define LCD_FEEDBACK_FREQUENCY_HZ 5000
@ -1321,7 +1321,7 @@ void lcd_quick_feedback() {
#ifndef LCD_FEEDBACK_FREQUENCY_DURATION_MS
#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
#endif
lcd_buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ);
buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ);
#else
#ifndef LCD_FEEDBACK_FREQUENCY_DURATION_MS
#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
@ -1745,7 +1745,12 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
#endif
}
void lcd_buzz(long duration, uint16_t freq) {
bool lcd_clicked() { return LCD_CLICKED; }
#endif // ULTIPANEL
#if HAS_BUZZER
void buzz(long duration, uint16_t freq) {
if (freq > 0) {
#ifdef LCD_USE_I2C_BUZZER
lcd.buzz(duration, freq);
@ -1761,10 +1766,7 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
delay(duration);
}
}
bool lcd_clicked() { return LCD_CLICKED; }
#endif // ULTIPANEL
#endif
/*********************************/
/** Number to string conversion **/

7
Marlin/ultralcd.h
View File

@ -52,8 +52,6 @@
#ifdef FILAMENT_LCD_DISPLAY
extern millis_t previous_lcd_status_ms;
#endif
void lcd_buzz(long duration,uint16_t freq);
void lcd_quick_feedback(); // Audible feedback for a button click - could also be visual
bool lcd_clicked();
@ -106,7 +104,6 @@
FORCE_INLINE void lcd_setstatuspgm(const char* message, const uint8_t level=0) {}
FORCE_INLINE void lcd_buttons_update() {}
FORCE_INLINE void lcd_reset_alert_level() {}
FORCE_INLINE void lcd_buzz(long duration, uint16_t freq) {}
FORCE_INLINE bool lcd_detected(void) { return true; }
#define LCD_MESSAGEPGM(x) do{}while(0)
@ -114,6 +111,10 @@
#endif //ULTRA_LCD
#if HAS_BUZZER
void buzz(long duration,uint16_t freq);
#endif
char *itostr2(const uint8_t &x);
char *itostr31(const int &xx);
char *itostr3(const int &xx);