mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-23 20:18:52 +00:00
Catch more LPC1768 pin conflicts (#17019)
This commit is contained in:
Scott Lahteine
GitHub
parent
39c34e4992
commit
730804289c
@ -88,40 +88,168 @@
|
|||||||
* Serial3 | P0_00 | P0_01 |
|
* Serial3 | P0_00 | P0_01 |
|
||||||
*/
|
*/
|
||||||
#if (defined(SERIAL_PORT) && SERIAL_PORT == 0) || (defined(SERIAL_PORT_2) && SERIAL_PORT_2 == 0) || (defined(DGUS_SERIAL_PORT) && DGUS_SERIAL_PORT == 0)
|
#if (defined(SERIAL_PORT) && SERIAL_PORT == 0) || (defined(SERIAL_PORT_2) && SERIAL_PORT_2 == 0) || (defined(DGUS_SERIAL_PORT) && DGUS_SERIAL_PORT == 0)
|
||||||
#if X_CS_PIN == P0_02 || TMC_SW_MISO == P0_02 || (E_STEPPERS && E_MUX1_PIN == P0_02) \
|
#define IS_TX0(P) (P == P0_02)
|
||||||
|| Y_CS_PIN == P0_03 || TMC_SW_MOSI == P0_03 || (E_STEPPERS && E_MUX0_PIN == P0_03)
|
#define IS_RX0(P) (P == P0_03)
|
||||||
#error "Serial port assignment (0) conflicts with other pins!"
|
#if IS_TX0(TMC_SW_MISO) || IS_RX0(TMC_SW_MOSI)
|
||||||
|
#error "Serial port pins (0) conflict with Trinamic SPI pins!"
|
||||||
|
#elif ENABLED(MK2_MULTIPLEXER) && (IS_TX0(E_MUX1_PIN) || IS_RX0(E_MUX0_PIN))
|
||||||
|
#error "Serial port pins (0) conflict with MK2 multiplexer pins!"
|
||||||
|
#elif (AXIS_HAS_SPI(X) && IS_TX0(X_CS_PIN)) || (AXIS_HAS_SPI(Y) && IS_RX0(Y_CS_PIN))
|
||||||
|
#error "Serial port pins (0) conflict with X/Y axis SPI pins!"
|
||||||
#endif
|
#endif
|
||||||
|
#undef IS_TX0
|
||||||
|
#undef IS_RX0
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1 || DGUS_SERIAL_PORT == 1
|
#if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1 || DGUS_SERIAL_PORT == 1
|
||||||
#if TMC_SW_SCK == P0_15
|
#define IS_TX1(P) (P == P0_15)
|
||||||
#error "Serial port assignment (1) conflicts with other pins!"
|
#define IS_RX1(P) (P == P0_16)
|
||||||
|
#if IS_TX1(TMC_SW_SCK)
|
||||||
|
#error "Serial port pins (1) conflict with other pins!"
|
||||||
#elif HAS_SPI_LCD
|
#elif HAS_SPI_LCD
|
||||||
#if BTN_EN2 == P0_15 || SCK_PIN == P0_15 || LCD_PINS_D4 == P0_15 || DOGLCD_SCK == P0_15 || LCD_RESET_PIN == P0_15 || LCD_PINS_RS == P0_15 || SHIFT_CLK == P0_15 \
|
#if IS_TX1(BTN_EN2) || IS_RX1(BTN_EN1)
|
||||||
|| BTN_EN1 == P0_16 || LCD_SDSS == P0_16 || LCD_PINS_RS == P0_16 || MISO_PIN == P0_16 || DOGLCD_A0 == P0_16 || SS_PIN == P0_16 || LCD_SDSS == P0_16 || DOGLCD_CS == P0_16 || LCD_RESET_PIN == P0_16 || LCD_BACKLIGHT_PIN == P0_16
|
#error "Serial port pins (1) conflict with Encoder Buttons!"
|
||||||
#error "Serial port assignment (1) conflicts with other pins!"
|
#elif IS_TX1(SCK_PIN) || IS_TX1(LCD_PINS_D4) || IS_TX1(DOGLCD_SCK) || IS_TX1(LCD_RESET_PIN) || IS_TX1(LCD_PINS_RS) || IS_TX1(SHIFT_CLK) \
|
||||||
|
|| IS_RX1(LCD_SDSS) || IS_RX1(LCD_PINS_RS) || IS_RX1(MISO_PIN) || IS_RX1(DOGLCD_A0) || IS_RX1(SS_PIN) || IS_RX1(LCD_SDSS) || IS_RX1(DOGLCD_CS) || IS_RX1(LCD_RESET_PIN) || IS_RX1(LCD_BACKLIGHT_PIN)
|
||||||
|
#error "Serial port pins (1) conflict with LCD pins!"
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
#undef IS_TX1
|
||||||
|
#undef IS_RX1
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if SERIAL_PORT == 2 || SERIAL_PORT_2 == 2 || DGUS_SERIAL_PORT == 2
|
#if SERIAL_PORT == 2 || SERIAL_PORT_2 == 2 || DGUS_SERIAL_PORT == 2
|
||||||
#if Y_MIN_PIN == P0_10 || Z_MIN_PROBE_PIN == P0_10 \
|
#define IS_TX2(P) (P == P0_10)
|
||||||
|| X_ENABLE_PIN == P0_10 || Y_ENABLE_PIN == P0_10 || X2_ENABLE_PIN == P0_10 || Y2_ENABLE_PIN == P0_10 || Z2_ENABLE_PIN == P0_10 || Z3_ENABLE_PIN == P0_10 || Z4_ENABLE_PIN == P0_10 \
|
#define IS_RX2(P) (P == P0_11)
|
||||||
|| X2_CS_PIN == P0_10 || Y2_CS_PIN == P0_10 || Z2_CS_PIN == P0_10 || Z3_CS_PIN == P0_10 || Z4_CS_PIN == P0_10 \
|
#if IS_TX2(X2_ENABLE_PIN) || IS_RX2(X2_DIR_PIN) || IS_RX2(X2_STEP_PIN) || (AXIS_HAS_SPI(X2) && IS_TX2(X2_CS_PIN))
|
||||||
|| X_DIR_PIN == P0_11 || Y_DIR_PIN == P0_11 || X2_DIR_PIN == P0_11 || Y2_DIR_PIN == P0_11 || Z2_DIR_PIN == P0_11 || Z3_DIR_PIN == P0_11 || Z4_DIR_PIN == P0_11 \
|
#error "Serial port pins (2) conflict with X2 pins!"
|
||||||
|| X2_STEP_PIN == P0_11 || Y2_STEP_PIN == P0_11 || Z2_STEP_PIN == P0_11 || Z3_STEP_PIN == P0_11 || Z4_STEP_PIN == P0_11
|
#elif IS_TX2(Y2_ENABLE_PIN) || IS_RX2(Y2_DIR_PIN) || IS_RX2(Y2_STEP_PIN) || (AXIS_HAS_SPI(Y2) && IS_TX2(Y2_CS_PIN))
|
||||||
#error "Serial port assignment (2) conflicts with other pins!"
|
#error "Serial port pins (2) conflict with Y2 pins!"
|
||||||
#elif (E_STEPPERS > 1 && (E1_ENABLE_PIN == P0_10 || E1_CS_PIN == P0_10)) || (E_STEPPERS > 0 && (E0_DIR_PIN == P0_11 || E0_STEP_PIN == P0_11))
|
#elif IS_TX2(Z2_ENABLE_PIN) || IS_RX2(Z2_DIR_PIN) || IS_RX2(Z2_STEP_PIN) || (AXIS_HAS_SPI(Z2) && IS_TX2(Z2_CS_PIN))
|
||||||
#error "Serial port assignment (2) conflicts with other pins!"
|
#error "Serial port pins (2) conflict with Z2 pins!"
|
||||||
|
#elif IS_TX2(Z3_ENABLE_PIN) || IS_RX2(Z3_DIR_PIN) || IS_RX2(Z3_STEP_PIN) || (AXIS_HAS_SPI(Z3) && IS_TX2(Z3_CS_PIN))
|
||||||
|
#error "Serial port pins (2) conflict with Z3 pins!"
|
||||||
|
#elif IS_TX2(Z4_ENABLE_PIN) || IS_RX2(Z4_DIR_PIN) || IS_RX2(Z4_STEP_PIN) || (AXIS_HAS_SPI(Z4) && IS_TX2(Z4_CS_PIN))
|
||||||
|
#error "Serial port pins (2) conflict with Z4 pins!"
|
||||||
|
#elif IS_RX2(X_DIR_PIN) || IS_RX2(Y_DIR_PIN)
|
||||||
|
#error "Serial port pins (2) conflict with other pins!"
|
||||||
|
#elif Y_HOME_DIR < 0 && IS_TX2(Y_STOP_PIN)
|
||||||
|
#error "Serial port pins (2) conflict with Y endstop pin!"
|
||||||
|
#elif HAS_CUSTOM_PROBE_PIN && IS_TX2(Z_MIN_PROBE_PIN)
|
||||||
|
#error "Serial port pins (2) conflict with probe pin!"
|
||||||
|
#elif IS_TX2(X_ENABLE_PIN) || IS_RX2(X_DIR_PIN) || IS_TX2(Y_ENABLE_PIN) || IS_RX2(Y_DIR_PIN)
|
||||||
|
#error "Serial port pins (2) conflict with X/Y stepper pins!"
|
||||||
|
#elif EXTRUDERS > 1 && (IS_TX2(E1_ENABLE_PIN) || (AXIS_HAS_SPI(E1) && IS_TX2(E1_CS_PIN)))
|
||||||
|
#error "Serial port pins (2) conflict with E1 stepper pins!"
|
||||||
|
#elif EXTRUDERS && (IS_RX2(E0_DIR_PIN) || IS_RX2(E0_STEP_PIN))
|
||||||
|
#error "Serial port pins (2) conflict with E stepper pins!"
|
||||||
#endif
|
#endif
|
||||||
|
#undef IS_TX2
|
||||||
|
#undef IS_RX2
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if SERIAL_PORT == 3 || SERIAL_PORT_2 == 3 || DGUS_SERIAL_PORT == 3
|
#if SERIAL_PORT == 3 || SERIAL_PORT_2 == 3 || DGUS_SERIAL_PORT == 3
|
||||||
#if X_MIN_PIN == P0_00 || Y_SERIAL_TX_PIN == P0_00 || Y_SERIAL_RX_PIN == P0_00 \
|
#define PIN_IS_TX3(P) (PIN_EXISTS(P) && P##_PIN == P0_00)
|
||||||
|| X_MAX_PIN == P0_01 || X_SERIAL_TX_PIN == P0_01 || X_SERIAL_RX_PIN == P0_01
|
#define PIN_IS_RX3(P) (P##_PIN == P0_01)
|
||||||
#error "Serial port assignment (2) conflicts with other pins!"
|
#if PIN_IS_TX3(X_MIN) || PIN_IS_RX3(X_MAX)
|
||||||
#elif E_STEPPERS > 1 && (E1_DIR_PIN == P0_00 || E1_STEP_PIN == P0_01)
|
#error "Serial port pins (3) conflict with X endstop pins!"
|
||||||
#error "Serial port assignment (2) conflicts with other pins!"
|
#elif PIN_IS_TX3(Y_SERIAL_TX) || PIN_IS_TX3(Y_SERIAL_RX) \
|
||||||
|
|| PIN_IS_RX3(X_SERIAL_TX) || PIN_IS_RX3(X_SERIAL_RX)
|
||||||
|
#error "Serial port pins (3) conflict with X/Y axis UART pins!"
|
||||||
|
#elif PIN_IS_TX3(X2_DIR) || PIN_IS_RX3(X2_STEP)
|
||||||
|
#error "Serial port pins (3) conflict with X2 pins!"
|
||||||
|
#elif PIN_IS_TX3(Y2_DIR) || PIN_IS_RX3(Y2_STEP)
|
||||||
|
#error "Serial port pins (3) conflict with Y2 pins!"
|
||||||
|
#elif PIN_IS_TX3(Z2_DIR) || PIN_IS_RX3(Z2_STEP)
|
||||||
|
#error "Serial port pins (3) conflict with Z2 pins!"
|
||||||
|
#elif PIN_IS_TX3(Z3_DIR) || PIN_IS_RX3(Z3_STEP)
|
||||||
|
#error "Serial port pins (3) conflict with Z3 pins!"
|
||||||
|
#elif PIN_IS_TX3(Z4_DIR) || PIN_IS_RX3(Z4_STEP)
|
||||||
|
#error "Serial port pins (3) conflict with Z4 pins!"
|
||||||
|
#elif EXTRUDERS > 1 && (PIN_IS_TX3(E1_DIR) || PIN_IS_RX3(E1_STEP))
|
||||||
|
#error "Serial port pins (3) conflict with E1 pins!"
|
||||||
#endif
|
#endif
|
||||||
|
#undef PIN_IS_TX3
|
||||||
|
#undef PIN_IS_RX3
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//
|
||||||
|
// Flag any i2c pin conflicts
|
||||||
|
//
|
||||||
|
#if ANY(DIGIPOT_I2C, DIGIPOT_MCP4018, DAC_STEPPER_CURRENT, EXPERIMENTAL_I2CBUS, I2C_POSITION_ENCODERS, NEOPIXEL_LED, PCA9632, I2C_EEPROM)
|
||||||
|
#define USEDI2CDEV_M 1 // <Arduino>/Wire.cpp
|
||||||
|
|
||||||
|
#if USEDI2CDEV_M == 0 // P0_27 [D57] (AUX-1) .......... P0_28 [D58] (AUX-1)
|
||||||
|
#define PIN_IS_SDA0(P) (P##_PIN == P0_27)
|
||||||
|
#define IS_SCL0(P) (P == P0_28)
|
||||||
|
#if ENABLED(SDSUPPORT) && PIN_IS_SDA0(SD_DETECT)
|
||||||
|
#error "SDA0 overlaps with SD_DETECT_PIN!"
|
||||||
|
#elif PIN_IS_SDA0(E0_AUTO_FAN)
|
||||||
|
#error "SDA0 overlaps with E0_AUTO_FAN_PIN!"
|
||||||
|
#elif PIN_IS_SDA0(BEEPER)
|
||||||
|
#error "SDA0 overlaps with BEEPER_PIN!"
|
||||||
|
#elif IS_SCL0(BTN_ENC)
|
||||||
|
#error "SCL0 overlaps with Encoder Button!"
|
||||||
|
#elif IS_SCL0(SS_PIN)
|
||||||
|
#error "SCL0 overlaps with SS_PIN!"
|
||||||
|
#elif IS_SCL0(LCD_SDSS)
|
||||||
|
#error "SCL0 overlaps with LCD_SDSS!"
|
||||||
|
#endif
|
||||||
|
#undef PIN_IS_SDA0
|
||||||
|
#undef IS_SCL0
|
||||||
|
#elif USEDI2CDEV_M == 1 // P0_00 [D20] (SCA) ............ P0_01 [D21] (SCL)
|
||||||
|
#define PIN_IS_SDA1(P) (PIN_EXISTS(P) && P##_PIN == P0_00)
|
||||||
|
#define PIN_IS_SCL1(P) (P##_PIN == P0_01)
|
||||||
|
#if PIN_IS_SDA1(X_MIN) || PIN_IS_SCL1(X_MAX)
|
||||||
|
#error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
|
||||||
|
#elif PIN_IS_SDA1(X2_DIR) || PIN_IS_SCL1(X2_STEP)
|
||||||
|
#error "One or more i2c (1) pins overlaps with X2 pins! Disable i2c peripherals."
|
||||||
|
#elif PIN_IS_SDA1(Y2_DIR) || PIN_IS_SCL1(Y2_STEP)
|
||||||
|
#error "One or more i2c (1) pins overlaps with Y2 pins! Disable i2c peripherals."
|
||||||
|
#elif PIN_IS_SDA1(Z2_DIR) || PIN_IS_SCL1(Z2_STEP)
|
||||||
|
#error "One or more i2c (1) pins overlaps with Z2 pins! Disable i2c peripherals."
|
||||||
|
#elif PIN_IS_SDA1(Z3_DIR) || PIN_IS_SCL1(Z3_STEP)
|
||||||
|
#error "One or more i2c (1) pins overlaps with Z3 pins! Disable i2c peripherals."
|
||||||
|
#elif PIN_IS_SDA1(Z4_DIR) || PIN_IS_SCL1(Z4_STEP)
|
||||||
|
#error "One or more i2c (1) pins overlaps with Z4 pins! Disable i2c peripherals."
|
||||||
|
#elif EXTRUDERS > 1 && (PIN_IS_SDA1(E1_DIR) || PIN_IS_SCL1(E1_STEP))
|
||||||
|
#error "One or more i2c (1) pins overlaps with E1 pins! Disable i2c peripherals."
|
||||||
|
#endif
|
||||||
|
#undef PIN_IS_SDA1
|
||||||
|
#undef PIN_IS_SCL1
|
||||||
|
#elif USEDI2CDEV_M == 2 // P0_10 [D38] (X_ENABLE_PIN) ... P0_11 [D55] (X_DIR_PIN)
|
||||||
|
#define PIN_IS_SDA2(P) (P##_PIN == P0_10)
|
||||||
|
#define PIN_IS_SCL2(P) (P##_PIN == P0_11)
|
||||||
|
#if PIN_IS_SDA2(Y_STOP)
|
||||||
|
#error "i2c SDA2 overlaps with Y endstop pin!"
|
||||||
|
#elif HAS_CUSTOM_PROBE_PIN && PIN_IS_SDA2(Z_MIN_PROBE)
|
||||||
|
#error "i2c SDA2 overlaps with Z probe pin!"
|
||||||
|
#elif PIN_IS_SDA2(X_ENABLE) || PIN_IS_SDA2(Y_ENABLE)
|
||||||
|
#error "i2c SDA2 overlaps with X/Y ENABLE pin!"
|
||||||
|
#elif AXIS_HAS_SPI(X) && PIN_IS_SDA2(X_CS)
|
||||||
|
#error "i2c SDA2 overlaps with X CS pin!"
|
||||||
|
#elif PIN_IS_SDA2(X2_ENABLE)
|
||||||
|
#error "i2c SDA2 overlaps with X2 enable pin! Disable i2c peripherals."
|
||||||
|
#elif PIN_IS_SDA2(Y2_ENABLE)
|
||||||
|
#error "i2c SDA2 overlaps with Y2 enable pin! Disable i2c peripherals."
|
||||||
|
#elif PIN_IS_SDA2(Z2_ENABLE)
|
||||||
|
#error "i2c SDA2 overlaps with Z2 enable pin! Disable i2c peripherals."
|
||||||
|
#elif PIN_IS_SDA2(Z3_ENABLE)
|
||||||
|
#error "i2c SDA2 overlaps with Z3 enable pin! Disable i2c peripherals."
|
||||||
|
#elif PIN_IS_SDA2(Z4_ENABLE)
|
||||||
|
#error "i2c SDA2 overlaps with Z4 enable pin! Disable i2c peripherals."
|
||||||
|
#elif EXTRUDERS > 1 && PIN_IS_SDA2(E1_ENABLE)
|
||||||
|
#error "i2c SDA2 overlaps with E1 enable pin! Disable i2c peripherals."
|
||||||
|
#elif EXTRUDERS > 1 && AXIS_HAS_SPI(E1) && PIN_IS_SDA2(E1_CS)
|
||||||
|
#error "i2c SDA2 overlaps with E1 CS pin! Disable i2c peripherals."
|
||||||
|
#elif EXTRUDERS && (PIN_IS_SDA2(E0_STEP) || PIN_IS_SDA2(E0_DIR))
|
||||||
|
#error "i2c SCL2 overlaps with E0 STEP/DIR pin! Disable i2c peripherals."
|
||||||
|
#elif PIN_IS_SDA2(X_DIR) || PIN_IS_SDA2(Y_DIR)
|
||||||
|
#error "One or more i2c pins overlaps with X/Y DIR pin! Disable i2c peripherals."
|
||||||
|
#endif
|
||||||
|
#undef PIN_IS_SDA2
|
||||||
|
#undef PIN_IS_SCL2
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#undef USEDI2CDEV_M
|
||||||
#endif
|
#endif
|
||||||
|
|||||||
@ -433,23 +433,42 @@
|
|||||||
#ifndef HOTENDS
|
#ifndef HOTENDS
|
||||||
#define HOTENDS EXTRUDERS
|
#define HOTENDS EXTRUDERS
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifndef E_STEPPERS
|
#ifndef E_STEPPERS
|
||||||
#define E_STEPPERS EXTRUDERS
|
#define E_STEPPERS EXTRUDERS
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifndef E_MANUAL
|
#ifndef E_MANUAL
|
||||||
#define E_MANUAL EXTRUDERS
|
#define E_MANUAL EXTRUDERS
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Helper macros for extruder and hotend arrays
|
||||||
#define HOTEND_LOOP() for (int8_t e = 0; e < HOTENDS; e++)
|
#define HOTEND_LOOP() for (int8_t e = 0; e < HOTENDS; e++)
|
||||||
|
#define ARRAY_BY_EXTRUDERS(V...) ARRAY_N(EXTRUDERS, V)
|
||||||
|
#define ARRAY_BY_EXTRUDERS1(v1) ARRAY_BY_EXTRUDERS(v1, v1, v1, v1, v1, v1)
|
||||||
|
#define ARRAY_BY_HOTENDS(V...) ARRAY_N(HOTENDS, V)
|
||||||
|
#define ARRAY_BY_HOTENDS1(v1) ARRAY_BY_HOTENDS(v1, v1, v1, v1, v1, v1)
|
||||||
|
|
||||||
#define DO_SWITCH_EXTRUDER (ENABLED(SWITCHING_EXTRUDER) && (DISABLED(SWITCHING_NOZZLE) || SWITCHING_EXTRUDER_SERVO_NR != SWITCHING_NOZZLE_SERVO_NR))
|
#define DO_SWITCH_EXTRUDER (ENABLED(SWITCHING_EXTRUDER) && (DISABLED(SWITCHING_NOZZLE) || SWITCHING_EXTRUDER_SERVO_NR != SWITCHING_NOZZLE_SERVO_NR))
|
||||||
#define SWITCHING_NOZZLE_TWO_SERVOS defined(SWITCHING_NOZZLE_E1_SERVO_NR)
|
#define SWITCHING_NOZZLE_TWO_SERVOS defined(SWITCHING_NOZZLE_E1_SERVO_NR)
|
||||||
|
|
||||||
#define HAS_HOTEND_OFFSET (HOTENDS > 1)
|
|
||||||
#define HAS_DUPLICATION_MODE EITHER(DUAL_X_CARRIAGE, MULTI_NOZZLE_DUPLICATION)
|
#define HAS_DUPLICATION_MODE EITHER(DUAL_X_CARRIAGE, MULTI_NOZZLE_DUPLICATION)
|
||||||
|
|
||||||
|
#define HAS_HOTEND_OFFSET (HOTENDS > 1)
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Default hotend offsets, if not defined
|
||||||
|
*/
|
||||||
|
#if HAS_HOTEND_OFFSET
|
||||||
|
#ifndef HOTEND_OFFSET_X
|
||||||
|
#define HOTEND_OFFSET_X { 0 } // X offsets for each extruder
|
||||||
|
#endif
|
||||||
|
#ifndef HOTEND_OFFSET_Y
|
||||||
|
#define HOTEND_OFFSET_Y { 0 } // Y offsets for each extruder
|
||||||
|
#endif
|
||||||
|
#ifndef HOTEND_OFFSET_Z
|
||||||
|
#define HOTEND_OFFSET_Z { 0 } // Z offsets for each extruder
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* DISTINCT_E_FACTORS affects how some E factors are accessed
|
* DISTINCT_E_FACTORS affects how some E factors are accessed
|
||||||
*/
|
*/
|
||||||
@ -575,8 +594,23 @@
|
|||||||
|
|
||||||
#define IS_RE_ARM_BOARD MB(RAMPS_14_RE_ARM_EFB, RAMPS_14_RE_ARM_EEB, RAMPS_14_RE_ARM_EFF, RAMPS_14_RE_ARM_EEF, RAMPS_14_RE_ARM_SF)
|
#define IS_RE_ARM_BOARD MB(RAMPS_14_RE_ARM_EFB, RAMPS_14_RE_ARM_EEB, RAMPS_14_RE_ARM_EFF, RAMPS_14_RE_ARM_EEF, RAMPS_14_RE_ARM_SF)
|
||||||
|
|
||||||
|
// Linear advance uses Jerk since E is an isolated axis
|
||||||
#define HAS_LINEAR_E_JERK (DISABLED(CLASSIC_JERK) && ENABLED(LIN_ADVANCE))
|
#define HAS_LINEAR_E_JERK (DISABLED(CLASSIC_JERK) && ENABLED(LIN_ADVANCE))
|
||||||
|
|
||||||
|
// This flag indicates some kind of jerk storage is needed
|
||||||
|
#define HAS_CLASSIC_JERK (ENABLED(CLASSIC_JERK) || IS_KINEMATIC)
|
||||||
|
|
||||||
|
// E jerk exists with JD disabled (of course) but also when Linear Advance is disabled on Delta/SCARA
|
||||||
|
#define HAS_CLASSIC_E_JERK (ENABLED(CLASSIC_JERK) || (IS_KINEMATIC && DISABLED(LIN_ADVANCE)))
|
||||||
|
|
||||||
#ifndef SPI_SPEED
|
#ifndef SPI_SPEED
|
||||||
#define SPI_SPEED SPI_FULL_SPEED
|
#define SPI_SPEED SPI_FULL_SPEED
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* This setting is also used by M109 when trying to calculate
|
||||||
|
* a ballpark safe margin to prevent wait-forever situation.
|
||||||
|
*/
|
||||||
|
#ifndef EXTRUDE_MINTEMP
|
||||||
|
#define EXTRUDE_MINTEMP 170
|
||||||
|
#endif
|
||||||
|
|||||||
@ -56,11 +56,22 @@
|
|||||||
#undef SHOW_TEMP_ADC_VALUES
|
#undef SHOW_TEMP_ADC_VALUES
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if !NUM_SERIAL
|
||||||
|
#undef BAUD_RATE_GCODE
|
||||||
|
#endif
|
||||||
|
|
||||||
// Multiple Z steppers
|
// Multiple Z steppers
|
||||||
#ifndef NUM_Z_STEPPER_DRIVERS
|
#ifndef NUM_Z_STEPPER_DRIVERS
|
||||||
#define NUM_Z_STEPPER_DRIVERS 1
|
#define NUM_Z_STEPPER_DRIVERS 1
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
|
||||||
|
#undef Z_STEPPER_ALIGN_AMP
|
||||||
|
#endif
|
||||||
|
#ifndef Z_STEPPER_ALIGN_AMP
|
||||||
|
#define Z_STEPPER_ALIGN_AMP 1.0
|
||||||
|
#endif
|
||||||
|
|
||||||
#define HAS_CUTTER EITHER(SPINDLE_FEATURE, LASER_FEATURE)
|
#define HAS_CUTTER EITHER(SPINDLE_FEATURE, LASER_FEATURE)
|
||||||
|
|
||||||
#if !defined(__AVR__) || !defined(USBCON)
|
#if !defined(__AVR__) || !defined(USBCON)
|
||||||
@ -121,9 +132,6 @@
|
|||||||
#define LED_CONTROL_MENU
|
#define LED_CONTROL_MENU
|
||||||
#define LED_USER_PRESET_STARTUP
|
#define LED_USER_PRESET_STARTUP
|
||||||
#define LED_COLOR_PRESETS
|
#define LED_COLOR_PRESETS
|
||||||
#ifndef LED_USER_PRESET_RED
|
|
||||||
#define LED_USER_PRESET_RED 255
|
|
||||||
#endif
|
|
||||||
#ifndef LED_USER_PRESET_GREEN
|
#ifndef LED_USER_PRESET_GREEN
|
||||||
#define LED_USER_PRESET_GREEN 128
|
#define LED_USER_PRESET_GREEN 128
|
||||||
#endif
|
#endif
|
||||||
@ -135,6 +143,32 @@
|
|||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Set defaults for unspecified LED user colors
|
||||||
|
#if ENABLED(LED_CONTROL_MENU)
|
||||||
|
#ifndef LED_USER_PRESET_RED
|
||||||
|
#define LED_USER_PRESET_RED 255
|
||||||
|
#endif
|
||||||
|
#ifndef LED_USER_PRESET_GREEN
|
||||||
|
#define LED_USER_PRESET_GREEN 255
|
||||||
|
#endif
|
||||||
|
#ifndef LED_USER_PRESET_BLUE
|
||||||
|
#define LED_USER_PRESET_BLUE 255
|
||||||
|
#endif
|
||||||
|
#ifndef LED_USER_PRESET_WHITE
|
||||||
|
#define LED_USER_PRESET_WHITE 0
|
||||||
|
#endif
|
||||||
|
#ifndef LED_USER_PRESET_BRIGHTNESS
|
||||||
|
#ifdef NEOPIXEL_BRIGHTNESS
|
||||||
|
#define LED_USER_PRESET_BRIGHTNESS NEOPIXEL_BRIGHTNESS
|
||||||
|
#else
|
||||||
|
#define LED_USER_PRESET_BRIGHTNESS 255
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// If platform requires early initialization of watchdog to properly boot
|
||||||
|
#define EARLY_WATCHDOG (ENABLED(USE_WATCHDOG) && defined(ARDUINO_ARCH_SAM))
|
||||||
|
|
||||||
// Extensible UI pin mapping for RepRapDiscount
|
// Extensible UI pin mapping for RepRapDiscount
|
||||||
#define TOUCH_UI_ULTIPANEL ENABLED(TOUCH_UI_FTDI_EVE) && ANY(AO_EXP1_PINMAP, AO_EXP2_PINMAP, CR10_TFT_PINMAP)
|
#define TOUCH_UI_ULTIPANEL ENABLED(TOUCH_UI_FTDI_EVE) && ANY(AO_EXP1_PINMAP, AO_EXP2_PINMAP, CR10_TFT_PINMAP)
|
||||||
|
|
||||||
@ -143,7 +177,68 @@
|
|||||||
#define POLL_JOG
|
#define POLL_JOG
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// G60/G61 Position Save
|
/**
|
||||||
#if SAVED_POSITIONS > 256
|
* Driver Timings
|
||||||
#error "SAVED_POSITIONS must be an integer from 0 to 256."
|
* NOTE: Driver timing order is longest-to-shortest duration.
|
||||||
|
* Preserve this ordering when adding new drivers.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef MINIMUM_STEPPER_POST_DIR_DELAY
|
||||||
|
#if HAS_DRIVER(TB6560)
|
||||||
|
#define MINIMUM_STEPPER_POST_DIR_DELAY 15000
|
||||||
|
#elif HAS_DRIVER(TB6600)
|
||||||
|
#define MINIMUM_STEPPER_POST_DIR_DELAY 1500
|
||||||
|
#elif HAS_DRIVER(DRV8825)
|
||||||
|
#define MINIMUM_STEPPER_POST_DIR_DELAY 650
|
||||||
|
#elif HAS_DRIVER(LV8729)
|
||||||
|
#define MINIMUM_STEPPER_POST_DIR_DELAY 500
|
||||||
|
#elif HAS_DRIVER(A5984)
|
||||||
|
#define MINIMUM_STEPPER_POST_DIR_DELAY 400
|
||||||
|
#elif HAS_DRIVER(A4988)
|
||||||
|
#define MINIMUM_STEPPER_POST_DIR_DELAY 200
|
||||||
|
#elif HAS_TRINAMIC || HAS_TRINAMIC_STANDALONE
|
||||||
|
#define MINIMUM_STEPPER_POST_DIR_DELAY 20
|
||||||
|
#else
|
||||||
|
#define MINIMUM_STEPPER_POST_DIR_DELAY 0 // Expect at least 10µS since one Stepper ISR must transpire
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef MINIMUM_STEPPER_PRE_DIR_DELAY
|
||||||
|
#define MINIMUM_STEPPER_PRE_DIR_DELAY MINIMUM_STEPPER_POST_DIR_DELAY
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef MINIMUM_STEPPER_PULSE
|
||||||
|
#if HAS_DRIVER(TB6560)
|
||||||
|
#define MINIMUM_STEPPER_PULSE 30
|
||||||
|
#elif HAS_DRIVER(TB6600)
|
||||||
|
#define MINIMUM_STEPPER_PULSE 3
|
||||||
|
#elif HAS_DRIVER(DRV8825)
|
||||||
|
#define MINIMUM_STEPPER_PULSE 2
|
||||||
|
#elif HAS_DRIVER(A4988) || HAS_DRIVER(A5984)
|
||||||
|
#define MINIMUM_STEPPER_PULSE 1
|
||||||
|
#elif HAS_TRINAMIC || HAS_TRINAMIC_STANDALONE
|
||||||
|
#define MINIMUM_STEPPER_PULSE 0
|
||||||
|
#elif HAS_DRIVER(LV8729)
|
||||||
|
#define MINIMUM_STEPPER_PULSE 0
|
||||||
|
#else
|
||||||
|
#define MINIMUM_STEPPER_PULSE 2
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef MAXIMUM_STEPPER_RATE
|
||||||
|
#if HAS_DRIVER(TB6560)
|
||||||
|
#define MAXIMUM_STEPPER_RATE 15000
|
||||||
|
#elif HAS_DRIVER(TB6600)
|
||||||
|
#define MAXIMUM_STEPPER_RATE 150000
|
||||||
|
#elif HAS_DRIVER(DRV8825)
|
||||||
|
#define MAXIMUM_STEPPER_RATE 250000
|
||||||
|
#elif HAS_DRIVER(A4988)
|
||||||
|
#define MAXIMUM_STEPPER_RATE 500000
|
||||||
|
#elif HAS_DRIVER(LV8729)
|
||||||
|
#define MAXIMUM_STEPPER_RATE 1000000
|
||||||
|
#elif HAS_TRINAMIC || HAS_TRINAMIC_STANDALONE
|
||||||
|
#define MAXIMUM_STEPPER_RATE 5000000
|
||||||
|
#else
|
||||||
|
#define MAXIMUM_STEPPER_RATE 250000
|
||||||
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|||||||
@ -40,9 +40,6 @@
|
|||||||
#define NOT_A_PIN 0 // For PINS_DEBUGGING
|
#define NOT_A_PIN 0 // For PINS_DEBUGGING
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define HAS_CLASSIC_JERK (ENABLED(CLASSIC_JERK) || IS_KINEMATIC)
|
|
||||||
#define HAS_CLASSIC_E_JERK (ENABLED(CLASSIC_JERK) || DISABLED(LIN_ADVANCE))
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Axis lengths and center
|
* Axis lengths and center
|
||||||
*/
|
*/
|
||||||
@ -579,99 +576,6 @@
|
|||||||
HEATER_0_USES_THERMISTOR, HEATER_1_USES_THERMISTOR, HEATER_2_USES_THERMISTOR, HEATER_3_USES_THERMISTOR, \
|
HEATER_0_USES_THERMISTOR, HEATER_1_USES_THERMISTOR, HEATER_2_USES_THERMISTOR, HEATER_3_USES_THERMISTOR, \
|
||||||
HEATER_4_USES_THERMISTOR, HEATER_5_USES_THERMISTOR, HEATER_6_USES_THERMISTOR, HEATER_7_USES_THERMISTOR )
|
HEATER_4_USES_THERMISTOR, HEATER_5_USES_THERMISTOR, HEATER_6_USES_THERMISTOR, HEATER_7_USES_THERMISTOR )
|
||||||
|
|
||||||
/**
|
|
||||||
* Default hotend offsets, if not defined
|
|
||||||
*/
|
|
||||||
#if HAS_HOTEND_OFFSET
|
|
||||||
#ifndef HOTEND_OFFSET_X
|
|
||||||
#define HOTEND_OFFSET_X { 0 } // X offsets for each extruder
|
|
||||||
#endif
|
|
||||||
#ifndef HOTEND_OFFSET_Y
|
|
||||||
#define HOTEND_OFFSET_Y { 0 } // Y offsets for each extruder
|
|
||||||
#endif
|
|
||||||
#ifndef HOTEND_OFFSET_Z
|
|
||||||
#define HOTEND_OFFSET_Z { 0 } // Z offsets for each extruder
|
|
||||||
#endif
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/**
|
|
||||||
* ARRAY_BY_EXTRUDERS based on EXTRUDERS
|
|
||||||
*/
|
|
||||||
#define ARRAY_BY_EXTRUDERS(V...) ARRAY_N(EXTRUDERS, V)
|
|
||||||
#define ARRAY_BY_EXTRUDERS1(v1) ARRAY_BY_EXTRUDERS(v1, v1, v1, v1, v1, v1)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* ARRAY_BY_HOTENDS based on HOTENDS
|
|
||||||
*/
|
|
||||||
#define ARRAY_BY_HOTENDS(V...) ARRAY_N(HOTENDS, V)
|
|
||||||
#define ARRAY_BY_HOTENDS1(v1) ARRAY_BY_HOTENDS(v1, v1, v1, v1, v1, v1)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* Driver Timings
|
|
||||||
* NOTE: Driver timing order is longest-to-shortest duration.
|
|
||||||
* Preserve this ordering when adding new drivers.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifndef MINIMUM_STEPPER_POST_DIR_DELAY
|
|
||||||
#if HAS_DRIVER(TB6560)
|
|
||||||
#define MINIMUM_STEPPER_POST_DIR_DELAY 15000
|
|
||||||
#elif HAS_DRIVER(TB6600)
|
|
||||||
#define MINIMUM_STEPPER_POST_DIR_DELAY 1500
|
|
||||||
#elif HAS_DRIVER(DRV8825)
|
|
||||||
#define MINIMUM_STEPPER_POST_DIR_DELAY 650
|
|
||||||
#elif HAS_DRIVER(LV8729)
|
|
||||||
#define MINIMUM_STEPPER_POST_DIR_DELAY 500
|
|
||||||
#elif HAS_DRIVER(A5984)
|
|
||||||
#define MINIMUM_STEPPER_POST_DIR_DELAY 400
|
|
||||||
#elif HAS_DRIVER(A4988)
|
|
||||||
#define MINIMUM_STEPPER_POST_DIR_DELAY 200
|
|
||||||
#elif HAS_TRINAMIC || HAS_TRINAMIC_STANDALONE
|
|
||||||
#define MINIMUM_STEPPER_POST_DIR_DELAY 20
|
|
||||||
#else
|
|
||||||
#define MINIMUM_STEPPER_POST_DIR_DELAY 0 // Expect at least 10µS since one Stepper ISR must transpire
|
|
||||||
#endif
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#ifndef MINIMUM_STEPPER_PRE_DIR_DELAY
|
|
||||||
#define MINIMUM_STEPPER_PRE_DIR_DELAY MINIMUM_STEPPER_POST_DIR_DELAY
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#ifndef MINIMUM_STEPPER_PULSE
|
|
||||||
#if HAS_DRIVER(TB6560)
|
|
||||||
#define MINIMUM_STEPPER_PULSE 30
|
|
||||||
#elif HAS_DRIVER(TB6600)
|
|
||||||
#define MINIMUM_STEPPER_PULSE 3
|
|
||||||
#elif HAS_DRIVER(DRV8825)
|
|
||||||
#define MINIMUM_STEPPER_PULSE 2
|
|
||||||
#elif HAS_DRIVER(A4988) || HAS_DRIVER(A5984)
|
|
||||||
#define MINIMUM_STEPPER_PULSE 1
|
|
||||||
#elif HAS_TRINAMIC || HAS_TRINAMIC_STANDALONE
|
|
||||||
#define MINIMUM_STEPPER_PULSE 0
|
|
||||||
#elif HAS_DRIVER(LV8729)
|
|
||||||
#define MINIMUM_STEPPER_PULSE 0
|
|
||||||
#else
|
|
||||||
#define MINIMUM_STEPPER_PULSE 2
|
|
||||||
#endif
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#ifndef MAXIMUM_STEPPER_RATE
|
|
||||||
#if HAS_DRIVER(TB6560)
|
|
||||||
#define MAXIMUM_STEPPER_RATE 15000
|
|
||||||
#elif HAS_DRIVER(TB6600)
|
|
||||||
#define MAXIMUM_STEPPER_RATE 150000
|
|
||||||
#elif HAS_DRIVER(DRV8825)
|
|
||||||
#define MAXIMUM_STEPPER_RATE 250000
|
|
||||||
#elif HAS_DRIVER(A4988)
|
|
||||||
#define MAXIMUM_STEPPER_RATE 500000
|
|
||||||
#elif HAS_DRIVER(LV8729)
|
|
||||||
#define MAXIMUM_STEPPER_RATE 1000000
|
|
||||||
#elif HAS_TRINAMIC || HAS_TRINAMIC_STANDALONE
|
|
||||||
#define MAXIMUM_STEPPER_RATE 5000000
|
|
||||||
#else
|
|
||||||
#define MAXIMUM_STEPPER_RATE 250000
|
|
||||||
#endif
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* X_DUAL_ENDSTOPS endstop reassignment
|
* X_DUAL_ENDSTOPS endstop reassignment
|
||||||
*/
|
*/
|
||||||
@ -1522,6 +1426,7 @@
|
|||||||
#if !HAS_TEMP_SENSOR
|
#if !HAS_TEMP_SENSOR
|
||||||
#undef AUTO_REPORT_TEMPERATURES
|
#undef AUTO_REPORT_TEMPERATURES
|
||||||
#endif
|
#endif
|
||||||
|
#define HAS_AUTO_REPORTING EITHER(AUTO_REPORT_TEMPERATURES, AUTO_REPORT_SD_STATUS)
|
||||||
|
|
||||||
#if !HAS_AUTO_CHAMBER_FAN || AUTO_CHAMBER_IS_E
|
#if !HAS_AUTO_CHAMBER_FAN || AUTO_CHAMBER_IS_E
|
||||||
#undef AUTO_POWER_CHAMBER_FAN
|
#undef AUTO_POWER_CHAMBER_FAN
|
||||||
@ -1618,20 +1523,6 @@
|
|||||||
|
|
||||||
#endif // HAS_MICROSTEPS
|
#endif // HAS_MICROSTEPS
|
||||||
|
|
||||||
#if !HAS_TEMP_SENSOR
|
|
||||||
#undef AUTO_REPORT_TEMPERATURES
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define HAS_AUTO_REPORTING EITHER(AUTO_REPORT_TEMPERATURES, AUTO_REPORT_SD_STATUS)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* This setting is also used by M109 when trying to calculate
|
|
||||||
* a ballpark safe margin to prevent wait-forever situation.
|
|
||||||
*/
|
|
||||||
#ifndef EXTRUDE_MINTEMP
|
|
||||||
#define EXTRUDE_MINTEMP 170
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Heater signal inversion defaults
|
* Heater signal inversion defaults
|
||||||
*/
|
*/
|
||||||
@ -2121,29 +2012,6 @@
|
|||||||
#define MAX_VFAT_ENTRIES (2)
|
#define MAX_VFAT_ENTRIES (2)
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Set defaults for unspecified LED user colors
|
|
||||||
#if ENABLED(LED_CONTROL_MENU)
|
|
||||||
#ifndef LED_USER_PRESET_RED
|
|
||||||
#define LED_USER_PRESET_RED 255
|
|
||||||
#endif
|
|
||||||
#ifndef LED_USER_PRESET_GREEN
|
|
||||||
#define LED_USER_PRESET_GREEN 255
|
|
||||||
#endif
|
|
||||||
#ifndef LED_USER_PRESET_BLUE
|
|
||||||
#define LED_USER_PRESET_BLUE 255
|
|
||||||
#endif
|
|
||||||
#ifndef LED_USER_PRESET_WHITE
|
|
||||||
#define LED_USER_PRESET_WHITE 0
|
|
||||||
#endif
|
|
||||||
#ifndef LED_USER_PRESET_BRIGHTNESS
|
|
||||||
#ifdef NEOPIXEL_BRIGHTNESS
|
|
||||||
#define LED_USER_PRESET_BRIGHTNESS NEOPIXEL_BRIGHTNESS
|
|
||||||
#else
|
|
||||||
#define LED_USER_PRESET_BRIGHTNESS 255
|
|
||||||
#endif
|
|
||||||
#endif
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// Nozzle park for Delta
|
// Nozzle park for Delta
|
||||||
#if BOTH(NOZZLE_PARK_FEATURE, DELTA)
|
#if BOTH(NOZZLE_PARK_FEATURE, DELTA)
|
||||||
#undef NOZZLE_PARK_Z_FEEDRATE
|
#undef NOZZLE_PARK_Z_FEEDRATE
|
||||||
@ -2180,13 +2048,10 @@
|
|||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Defined here to catch the above defines
|
// Defined here to catch the above defines
|
||||||
#if ENABLED(SDCARD_SORT_ALPHA)
|
#if ENABLED(SDCARD_SORT_ALPHA) && (FOLDER_SORTING || ENABLED(SDSORT_GCODE))
|
||||||
#define HAS_FOLDER_SORTING (FOLDER_SORTING || ENABLED(SDSORT_GCODE))
|
#define HAS_FOLDER_SORTING 1
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// If platform requires early initialization of watchdog to properly boot
|
|
||||||
#define EARLY_WATCHDOG (ENABLED(USE_WATCHDOG) && defined(ARDUINO_ARCH_SAM))
|
|
||||||
|
|
||||||
#if HAS_SPI_LCD
|
#if HAS_SPI_LCD
|
||||||
// Get LCD character width/height, which may be overridden by pins, configs, etc.
|
// Get LCD character width/height, which may be overridden by pins, configs, etc.
|
||||||
#ifndef LCD_WIDTH
|
#ifndef LCD_WIDTH
|
||||||
@ -2223,14 +2088,3 @@
|
|||||||
#define INIT_SDCARD_ON_BOOT
|
#define INIT_SDCARD_ON_BOOT
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if !NUM_SERIAL
|
|
||||||
#undef BAUD_RATE_GCODE
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
|
|
||||||
#undef Z_STEPPER_ALIGN_AMP
|
|
||||||
#endif
|
|
||||||
#ifndef Z_STEPPER_ALIGN_AMP
|
|
||||||
#define Z_STEPPER_ALIGN_AMP 1.0
|
|
||||||
#endif
|
|
||||||
|
|||||||
@ -2732,3 +2732,8 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
|
|||||||
#if HAS_TMC_SPI && ALL(MONITOR_DRIVER_STATUS, SDSUPPORT, USES_SHARED_SPI)
|
#if HAS_TMC_SPI && ALL(MONITOR_DRIVER_STATUS, SDSUPPORT, USES_SHARED_SPI)
|
||||||
#error "MONITOR_DRIVER_STATUS and SDSUPPORT cannot be used together on boards with shared SPI."
|
#error "MONITOR_DRIVER_STATUS and SDSUPPORT cannot be used together on boards with shared SPI."
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// G60/G61 Position Save
|
||||||
|
#if SAVED_POSITIONS > 256
|
||||||
|
#error "SAVED_POSITIONS must be an integer from 0 to 256."
|
||||||
|
#endif
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user