diff --git a/Marlin/src/feature/powerloss.h b/Marlin/src/feature/powerloss.h
index 33d9dc007c0..4bf0c06e2d7 100644
--- a/Marlin/src/feature/powerloss.h
+++ b/Marlin/src/feature/powerloss.h
@@ -153,6 +153,9 @@ class PrintJobRecovery {
static void prepare();
static void setup() {
+ #if PIN_EXISTS(OUTAGECON)
+ OUT_WRITE(OUTAGECON_PIN, HIGH);
+ #endif
#if PIN_EXISTS(POWER_LOSS)
#if ENABLED(POWER_LOSS_PULLUP)
SET_INPUT_PULLUP(POWER_LOSS_PIN);
diff --git a/Marlin/src/gcode/config/M43.cpp b/Marlin/src/gcode/config/M43.cpp
index cff143d5711..5807844012b 100644
--- a/Marlin/src/gcode/config/M43.cpp
+++ b/Marlin/src/gcode/config/M43.cpp
@@ -313,9 +313,16 @@ void GcodeSuite::M43() {
// 'P' Get the range of pins to test or watch
uint8_t first_pin = PARSED_PIN_INDEX('P', 0),
- last_pin = parser.seenval('P') ? first_pin : (NUMBER_PINS_TOTAL) - 1;
+ last_pin = parser.seenval('L') ? PARSED_PIN_INDEX('L', 0) : parser.seenval('P') ? first_pin : (NUMBER_PINS_TOTAL) - 1;
- if (first_pin > last_pin) return;
+ NOMORE(first_pin, (NUMBER_PINS_TOTAL) - 1);
+ NOMORE(last_pin, (NUMBER_PINS_TOTAL) - 1);
+
+ if (first_pin > last_pin) {
+ const uint8_t f = first_pin;
+ first_pin = last_pin;
+ last_pin = f;
+ }
// 'I' to ignore protected pins
const bool ignore_protection = parser.boolval('I');
diff --git a/Marlin/src/gcode/feature/advance/M900.cpp b/Marlin/src/gcode/feature/advance/M900.cpp
index 50d968627b6..8c0da41801c 100644
--- a/Marlin/src/gcode/feature/advance/M900.cpp
+++ b/Marlin/src/gcode/feature/advance/M900.cpp
@@ -50,6 +50,7 @@ void GcodeSuite::M900() {
#if EXTRUDERS < 2
constexpr uint8_t tool_index = 0;
+ UNUSED(tool_index);
#else
const uint8_t tool_index = parser.intval('T', active_extruder);
if (tool_index >= EXTRUDERS) {
diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
index 9f41390db90..1e0daeb567f 100644
--- a/Marlin/src/inc/Conditionals_post.h
+++ b/Marlin/src/inc/Conditionals_post.h
@@ -926,56 +926,8 @@
#define X2_MAX_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING
#elif X2_USE_ENDSTOP == _ZMAX_
#define X2_MAX_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING
- #else
- #define X2_MAX_ENDSTOP_INVERTING false
#endif
#endif
- #if !defined(X2_MAX_PIN) && !defined(X2_STOP_PIN)
- #if X2_USE_ENDSTOP == _XMIN_
- #define X2_MAX_PIN X_MIN_PIN
- #elif X2_USE_ENDSTOP == _XMAX_
- #define X2_MAX_PIN X_MAX_PIN
- #elif X2_USE_ENDSTOP == _XSTOP_
- #define X2_MAX_PIN X_STOP_PIN
- #elif X2_USE_ENDSTOP == _YMIN_
- #define X2_MAX_PIN Y_MIN_PIN
- #elif X2_USE_ENDSTOP == _YMAX_
- #define X2_MAX_PIN Y_MAX_PIN
- #elif X2_USE_ENDSTOP == _YSTOP_
- #define X2_MAX_PIN Y_STOP_PIN
- #elif X2_USE_ENDSTOP == _ZMIN_
- #define X2_MAX_PIN Z_MIN_PIN
- #elif X2_USE_ENDSTOP == _ZMAX_
- #define X2_MAX_PIN Z_MAX_PIN
- #elif X2_USE_ENDSTOP == _ZSTOP_
- #define X2_MAX_PIN Z_STOP_PIN
- #elif X2_USE_ENDSTOP == _XDIAG_
- #define X2_MAX_PIN X_DIAG_PIN
- #elif X2_USE_ENDSTOP == _YDIAG_
- #define X2_MAX_PIN Y_DIAG_PIN
- #elif X2_USE_ENDSTOP == _ZDIAG_
- #define X2_MAX_PIN Z_DIAG_PIN
- #elif X2_USE_ENDSTOP == _E0DIAG_
- #define X2_MAX_PIN E0_DIAG_PIN
- #elif X2_USE_ENDSTOP == _E1DIAG_
- #define X2_MAX_PIN E1_DIAG_PIN
- #elif X2_USE_ENDSTOP == _E2DIAG_
- #define X2_MAX_PIN E2_DIAG_PIN
- #elif X2_USE_ENDSTOP == _E3DIAG_
- #define X2_MAX_PIN E3_DIAG_PIN
- #elif X2_USE_ENDSTOP == _E4DIAG_
- #define X2_MAX_PIN E4_DIAG_PIN
- #elif X2_USE_ENDSTOP == _E5DIAG_
- #define X2_MAX_PIN E5_DIAG_PIN
- #elif X2_USE_ENDSTOP == _E6DIAG_
- #define X2_MAX_PIN E6_DIAG_PIN
- #elif X2_USE_ENDSTOP == _E7DIAG_
- #define X2_MAX_PIN E7_DIAG_PIN
- #endif
- #endif
- #ifndef X2_MIN_ENDSTOP_INVERTING
- #define X2_MIN_ENDSTOP_INVERTING false
- #endif
#else
#ifndef X2_MIN_ENDSTOP_INVERTING
#if X2_USE_ENDSTOP == _XMIN_
@@ -990,56 +942,14 @@
#define X2_MIN_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING
#elif X2_USE_ENDSTOP == _ZMAX_
#define X2_MIN_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING
- #else
- #define X2_MIN_ENDSTOP_INVERTING false
#endif
#endif
- #if !defined(X2_MIN_PIN) && !defined(X2_STOP_PIN)
- #if X2_USE_ENDSTOP == _XMIN_
- #define X2_MIN_PIN X_MIN_PIN
- #elif X2_USE_ENDSTOP == _XMAX_
- #define X2_MIN_PIN X_MAX_PIN
- #elif X2_USE_ENDSTOP == _XSTOP_
- #define X2_MIN_PIN X_STOP_PIN
- #elif X2_USE_ENDSTOP == _YMIN_
- #define X2_MIN_PIN Y_MIN_PIN
- #elif X2_USE_ENDSTOP == _YMAX_
- #define X2_MIN_PIN Y_MAX_PIN
- #elif X2_USE_ENDSTOP == _YSTOP_
- #define X2_MIN_PIN Y_STOP_PIN
- #elif X2_USE_ENDSTOP == _ZMIN_
- #define X2_MIN_PIN Z_MIN_PIN
- #elif X2_USE_ENDSTOP == _ZMAX_
- #define X2_MIN_PIN Z_MAX_PIN
- #elif X2_USE_ENDSTOP == _ZSTOP_
- #define X2_MIN_PIN Z_STOP_PIN
- #elif X2_USE_ENDSTOP == _XDIAG_
- #define X2_MIN_PIN X_DIAG_PIN
- #elif X2_USE_ENDSTOP == _YDIAG_
- #define X2_MIN_PIN Y_DIAG_PIN
- #elif X2_USE_ENDSTOP == _ZDIAG_
- #define X2_MIN_PIN Z_DIAG_PIN
- #elif X2_USE_ENDSTOP == _E0DIAG_
- #define X2_MIN_PIN E0_DIAG_PIN
- #elif X2_USE_ENDSTOP == _E1DIAG_
- #define X2_MIN_PIN E1_DIAG_PIN
- #elif X2_USE_ENDSTOP == _E2DIAG_
- #define X2_MIN_PIN E2_DIAG_PIN
- #elif X2_USE_ENDSTOP == _E3DIAG_
- #define X2_MIN_PIN E3_DIAG_PIN
- #elif X2_USE_ENDSTOP == _E4DIAG_
- #define X2_MIN_PIN E4_DIAG_PIN
- #elif X2_USE_ENDSTOP == _E5DIAG_
- #define X2_MIN_PIN E5_DIAG_PIN
- #elif X2_USE_ENDSTOP == _E6DIAG_
- #define X2_MIN_PIN E6_DIAG_PIN
- #elif X2_USE_ENDSTOP == _E7DIAG_
- #define X2_MIN_PIN E7_DIAG_PIN
- #endif
- #endif
- #ifndef X2_MAX_ENDSTOP_INVERTING
- #define X2_MAX_ENDSTOP_INVERTING false
- #endif
+ #endif
+ #ifndef X2_MAX_ENDSTOP_INVERTING
+ #define X2_MAX_ENDSTOP_INVERTING false
+ #endif
+ #ifndef X2_MIN_ENDSTOP_INVERTING
+ #define X2_MIN_ENDSTOP_INVERTING false
#endif
#endif
@@ -1061,56 +971,8 @@
#define Y2_MAX_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING
#elif Y2_USE_ENDSTOP == _ZMAX_
#define Y2_MAX_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING
- #else
- #define Y2_MAX_ENDSTOP_INVERTING false
#endif
#endif
- #if !defined(Y2_MAX_PIN) && !defined(Y2_STOP_PIN)
- #if Y2_USE_ENDSTOP == _XMIN_
- #define Y2_MAX_PIN X_MIN_PIN
- #elif Y2_USE_ENDSTOP == _XMAX_
- #define Y2_MAX_PIN X_MAX_PIN
- #elif Y2_USE_ENDSTOP == _XSTOP_
- #define Y2_MAX_PIN X_STOP_PIN
- #elif Y2_USE_ENDSTOP == _YMIN_
- #define Y2_MAX_PIN Y_MIN_PIN
- #elif Y2_USE_ENDSTOP == _YMAX_
- #define Y2_MAX_PIN Y_MAX_PIN
- #elif Y2_USE_ENDSTOP == _YSTOP_
- #define Y2_MAX_PIN Y_STOP_PIN
- #elif Y2_USE_ENDSTOP == _ZMIN_
- #define Y2_MAX_PIN Z_MIN_PIN
- #elif Y2_USE_ENDSTOP == _ZMAX_
- #define Y2_MAX_PIN Z_MAX_PIN
- #elif Y2_USE_ENDSTOP == _ZSTOP_
- #define Y2_MAX_PIN Z_STOP_PIN
- #elif Y2_USE_ENDSTOP == _XDIAG_
- #define Y2_MAX_PIN X_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _YDIAG_
- #define Y2_MAX_PIN Y_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _ZDIAG_
- #define Y2_MAX_PIN Z_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _E0DIAG_
- #define Y2_MAX_PIN E0_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _E1DIAG_
- #define Y2_MAX_PIN E1_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _E2DIAG_
- #define Y2_MAX_PIN E2_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _E3DIAG_
- #define Y2_MAX_PIN E3_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _E4DIAG_
- #define Y2_MAX_PIN E4_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _E5DIAG_
- #define Y2_MAX_PIN E5_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _E6DIAG_
- #define Y2_MAX_PIN E6_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _E7DIAG_
- #define Y2_MAX_PIN E7_DIAG_PIN
- #endif
- #endif
- #ifndef Y2_MIN_ENDSTOP_INVERTING
- #define Y2_MIN_ENDSTOP_INVERTING false
- #endif
#else
#ifndef Y2_MIN_ENDSTOP_INVERTING
#if Y2_USE_ENDSTOP == _XMIN_
@@ -1125,56 +987,14 @@
#define Y2_MIN_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING
#elif Y2_USE_ENDSTOP == _ZMAX_
#define Y2_MIN_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING
- #else
- #define Y2_MIN_ENDSTOP_INVERTING false
#endif
#endif
- #if !defined(Y2_MIN_PIN) && !defined(Y2_STOP_PIN)
- #if Y2_USE_ENDSTOP == _XMIN_
- #define Y2_MIN_PIN X_MIN_PIN
- #elif Y2_USE_ENDSTOP == _XMAX_
- #define Y2_MIN_PIN X_MAX_PIN
- #elif Y2_USE_ENDSTOP == _XSTOP_
- #define Y2_MIN_PIN X_STOP_PIN
- #elif Y2_USE_ENDSTOP == _YMIN_
- #define Y2_MIN_PIN Y_MIN_PIN
- #elif Y2_USE_ENDSTOP == _YMAX_
- #define Y2_MIN_PIN Y_MAX_PIN
- #elif Y2_USE_ENDSTOP == _YSTOP_
- #define Y2_MIN_PIN Y_STOP_PIN
- #elif Y2_USE_ENDSTOP == _ZMIN_
- #define Y2_MIN_PIN Z_MIN_PIN
- #elif Y2_USE_ENDSTOP == _ZMAX_
- #define Y2_MIN_PIN Z_MAX_PIN
- #elif Y2_USE_ENDSTOP == _ZSTOP_
- #define Y2_MIN_PIN Z_STOP_PIN
- #elif Y2_USE_ENDSTOP == _XDIAG_
- #define Y2_MIN_PIN X_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _YDIAG_
- #define Y2_MIN_PIN Y_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _ZDIAG_
- #define Y2_MIN_PIN Z_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _E0DIAG_
- #define Y2_MIN_PIN E0_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _E1DIAG_
- #define Y2_MIN_PIN E1_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _E2DIAG_
- #define Y2_MIN_PIN E2_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _E3DIAG_
- #define Y2_MIN_PIN E3_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _E4DIAG_
- #define Y2_MIN_PIN E4_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _E5DIAG_
- #define Y2_MIN_PIN E5_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _E6DIAG_
- #define Y2_MIN_PIN E6_DIAG_PIN
- #elif Y2_USE_ENDSTOP == _E7DIAG_
- #define Y2_MIN_PIN E7_DIAG_PIN
- #endif
- #endif
- #ifndef Y2_MAX_ENDSTOP_INVERTING
- #define Y2_MAX_ENDSTOP_INVERTING false
- #endif
+ #endif
+ #ifndef Y2_MAX_ENDSTOP_INVERTING
+ #define Y2_MAX_ENDSTOP_INVERTING false
+ #endif
+ #ifndef Y2_MIN_ENDSTOP_INVERTING
+ #define Y2_MIN_ENDSTOP_INVERTING false
#endif
#endif
@@ -1197,56 +1017,8 @@
#define Z2_MAX_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING
#elif Z2_USE_ENDSTOP == _ZMAX_
#define Z2_MAX_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING
- #else
- #define Z2_MAX_ENDSTOP_INVERTING false
#endif
#endif
- #if !defined(Z2_MAX_PIN) && !defined(Z2_STOP_PIN)
- #if Z2_USE_ENDSTOP == _XMIN_
- #define Z2_MAX_PIN X_MIN_PIN
- #elif Z2_USE_ENDSTOP == _XMAX_
- #define Z2_MAX_PIN X_MAX_PIN
- #elif Z2_USE_ENDSTOP == _XSTOP_
- #define Z2_MAX_PIN X_STOP_PIN
- #elif Z2_USE_ENDSTOP == _YMIN_
- #define Z2_MAX_PIN Y_MIN_PIN
- #elif Z2_USE_ENDSTOP == _YMAX_
- #define Z2_MAX_PIN Y_MAX_PIN
- #elif Z2_USE_ENDSTOP == _YSTOP_
- #define Z2_MAX_PIN Y_STOP_PIN
- #elif Z2_USE_ENDSTOP == _ZMIN_
- #define Z2_MAX_PIN Z_MIN_PIN
- #elif Z2_USE_ENDSTOP == _ZMAX_
- #define Z2_MAX_PIN Z_MAX_PIN
- #elif Z2_USE_ENDSTOP == _ZSTOP_
- #define Z2_MAX_PIN Z_STOP_PIN
- #elif Z2_USE_ENDSTOP == _XDIAG_
- #define Z2_MAX_PIN X_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _YDIAG_
- #define Z2_MAX_PIN Y_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _ZDIAG_
- #define Z2_MAX_PIN Z_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _E0DIAG_
- #define Z2_MAX_PIN E0_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _E1DIAG_
- #define Z2_MAX_PIN E1_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _E2DIAG_
- #define Z2_MAX_PIN E2_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _E3DIAG_
- #define Z2_MAX_PIN E3_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _E4DIAG_
- #define Z2_MAX_PIN E4_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _E5DIAG_
- #define Z2_MAX_PIN E5_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _E6DIAG_
- #define Z2_MAX_PIN E6_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _E7DIAG_
- #define Z2_MAX_PIN E7_DIAG_PIN
- #endif
- #endif
- #ifndef Z2_MIN_ENDSTOP_INVERTING
- #define Z2_MIN_ENDSTOP_INVERTING false
- #endif
#else
#ifndef Z2_MIN_ENDSTOP_INVERTING
#if Z2_USE_ENDSTOP == _XMIN_
@@ -1261,56 +1033,14 @@
#define Z2_MIN_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING
#elif Z2_USE_ENDSTOP == _ZMAX_
#define Z2_MIN_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING
- #else
- #define Z2_MIN_ENDSTOP_INVERTING false
#endif
#endif
- #ifndef Z2_MIN_PIN
- #if Z2_USE_ENDSTOP == _XMIN_
- #define Z2_MIN_PIN X_MIN_PIN
- #elif Z2_USE_ENDSTOP == _XMAX_
- #define Z2_MIN_PIN X_MAX_PIN
- #elif Z2_USE_ENDSTOP == _XSTOP_
- #define Z2_MIN_PIN X_STOP_PIN
- #elif Z2_USE_ENDSTOP == _YMIN_
- #define Z2_MIN_PIN Y_MIN_PIN
- #elif Z2_USE_ENDSTOP == _YMAX_
- #define Z2_MIN_PIN Y_MAX_PIN
- #elif Z2_USE_ENDSTOP == _YSTOP_
- #define Z2_MIN_PIN Y_STOP_PIN
- #elif Z2_USE_ENDSTOP == _ZMIN_
- #define Z2_MIN_PIN Z_MIN_PIN
- #elif Z2_USE_ENDSTOP == _ZMAX_
- #define Z2_MIN_PIN Z_MAX_PIN
- #elif Z2_USE_ENDSTOP == _ZSTOP_
- #define Z2_MIN_PIN Z_STOP_PIN
- #elif Z2_USE_ENDSTOP == _XDIAG_
- #define Z2_MIN_PIN X_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _YDIAG_
- #define Z2_MIN_PIN Y_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _ZDIAG_
- #define Z2_MIN_PIN Z_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _E0DIAG_
- #define Z2_MIN_PIN E0_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _E1DIAG_
- #define Z2_MIN_PIN E1_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _E2DIAG_
- #define Z2_MIN_PIN E2_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _E3DIAG_
- #define Z2_MIN_PIN E3_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _E4DIAG_
- #define Z2_MIN_PIN E4_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _E5DIAG_
- #define Z2_MIN_PIN E5_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _E6DIAG_
- #define Z2_MIN_PIN E6_DIAG_PIN
- #elif Z2_USE_ENDSTOP == _E7DIAG_
- #define Z2_MIN_PIN E7_DIAG_PIN
- #endif
- #endif
- #ifndef Z2_MAX_ENDSTOP_INVERTING
- #define Z2_MAX_ENDSTOP_INVERTING false
- #endif
+ #endif
+ #ifndef Z2_MAX_ENDSTOP_INVERTING
+ #define Z2_MAX_ENDSTOP_INVERTING false
+ #endif
+ #ifndef Z2_MIN_ENDSTOP_INVERTING
+ #define Z2_MIN_ENDSTOP_INVERTING false
#endif
#if NUM_Z_STEPPERS >= 3
@@ -1328,56 +1058,8 @@
#define Z3_MAX_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING
#elif Z3_USE_ENDSTOP == _ZMAX_
#define Z3_MAX_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING
- #else
- #define Z3_MAX_ENDSTOP_INVERTING false
#endif
#endif
- #ifndef Z3_MAX_PIN
- #if Z3_USE_ENDSTOP == _XMIN_
- #define Z3_MAX_PIN X_MIN_PIN
- #elif Z3_USE_ENDSTOP == _XMAX_
- #define Z3_MAX_PIN X_MAX_PIN
- #elif Z3_USE_ENDSTOP == _XSTOP_
- #define Z3_MAX_PIN X_STOP_PIN
- #elif Z3_USE_ENDSTOP == _YMIN_
- #define Z3_MAX_PIN Y_MIN_PIN
- #elif Z3_USE_ENDSTOP == _YMAX_
- #define Z3_MAX_PIN Y_MAX_PIN
- #elif Z3_USE_ENDSTOP == _YSTOP_
- #define Z3_MAX_PIN Y_STOP_PIN
- #elif Z3_USE_ENDSTOP == _ZMIN_
- #define Z3_MAX_PIN Z_MIN_PIN
- #elif Z3_USE_ENDSTOP == _ZMAX_
- #define Z3_MAX_PIN Z_MAX_PIN
- #elif Z3_USE_ENDSTOP == _ZSTOP_
- #define Z3_MAX_PIN Z_STOP_PIN
- #elif Z3_USE_ENDSTOP == _XDIAG_
- #define Z3_MAX_PIN X_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _YDIAG_
- #define Z3_MAX_PIN Y_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _ZDIAG_
- #define Z3_MAX_PIN Z_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _E0DIAG_
- #define Z3_MAX_PIN E0_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _E1DIAG_
- #define Z3_MAX_PIN E1_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _E2DIAG_
- #define Z3_MAX_PIN E2_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _E3DIAG_
- #define Z3_MAX_PIN E3_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _E4DIAG_
- #define Z3_MAX_PIN E4_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _E5DIAG_
- #define Z3_MAX_PIN E5_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _E6DIAG_
- #define Z3_MAX_PIN E6_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _E7DIAG_
- #define Z3_MAX_PIN E7_DIAG_PIN
- #endif
- #endif
- #ifndef Z3_MIN_ENDSTOP_INVERTING
- #define Z3_MIN_ENDSTOP_INVERTING false
- #endif
#else
#ifndef Z3_MIN_ENDSTOP_INVERTING
#if Z3_USE_ENDSTOP == _XMIN_
@@ -1392,56 +1074,14 @@
#define Z3_MIN_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING
#elif Z3_USE_ENDSTOP == _ZMAX_
#define Z3_MIN_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING
- #else
- #define Z3_MIN_ENDSTOP_INVERTING false
#endif
#endif
- #ifndef Z3_MIN_PIN
- #if Z3_USE_ENDSTOP == _XMIN_
- #define Z3_MIN_PIN X_MIN_PIN
- #elif Z3_USE_ENDSTOP == _XMAX_
- #define Z3_MIN_PIN X_MAX_PIN
- #elif Z3_USE_ENDSTOP == _XSTOP_
- #define Z3_MIN_PIN X_STOP_PIN
- #elif Z3_USE_ENDSTOP == _YMIN_
- #define Z3_MIN_PIN Y_MIN_PIN
- #elif Z3_USE_ENDSTOP == _YMAX_
- #define Z3_MIN_PIN Y_MAX_PIN
- #elif Z3_USE_ENDSTOP == _YSTOP_
- #define Z3_MIN_PIN Y_STOP_PIN
- #elif Z3_USE_ENDSTOP == _ZMIN_
- #define Z3_MIN_PIN Z_MIN_PIN
- #elif Z3_USE_ENDSTOP == _ZMAX_
- #define Z3_MIN_PIN Z_MAX_PIN
- #elif Z3_USE_ENDSTOP == _ZSTOP_
- #define Z3_MIN_PIN Z_STOP_PIN
- #elif Z3_USE_ENDSTOP == _XDIAG_
- #define Z3_MIN_PIN X_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _YDIAG_
- #define Z3_MIN_PIN Y_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _ZDIAG_
- #define Z3_MIN_PIN Z_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _E0DIAG_
- #define Z3_MIN_PIN E0_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _E1DIAG_
- #define Z3_MIN_PIN E1_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _E2DIAG_
- #define Z3_MIN_PIN E2_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _E3DIAG_
- #define Z3_MIN_PIN E3_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _E4DIAG_
- #define Z3_MIN_PIN E4_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _E5DIAG_
- #define Z3_MIN_PIN E5_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _E6DIAG_
- #define Z3_MIN_PIN E6_DIAG_PIN
- #elif Z3_USE_ENDSTOP == _E7DIAG_
- #define Z3_MIN_PIN E7_DIAG_PIN
- #endif
- #endif
- #ifndef Z3_MAX_ENDSTOP_INVERTING
- #define Z3_MAX_ENDSTOP_INVERTING false
- #endif
+ #endif
+ #ifndef Z3_MAX_ENDSTOP_INVERTING
+ #define Z3_MAX_ENDSTOP_INVERTING false
+ #endif
+ #ifndef Z3_MIN_ENDSTOP_INVERTING
+ #define Z3_MIN_ENDSTOP_INVERTING false
#endif
#endif
@@ -1460,56 +1100,8 @@
#define Z4_MAX_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING
#elif Z4_USE_ENDSTOP == _ZMAX_
#define Z4_MAX_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING
- #else
- #define Z4_MAX_ENDSTOP_INVERTING false
#endif
#endif
- #ifndef Z4_MAX_PIN
- #if Z4_USE_ENDSTOP == _XMIN_
- #define Z4_MAX_PIN X_MIN_PIN
- #elif Z4_USE_ENDSTOP == _XMAX_
- #define Z4_MAX_PIN X_MAX_PIN
- #elif Z4_USE_ENDSTOP == _XSTOP_
- #define Z4_MAX_PIN X_STOP_PIN
- #elif Z4_USE_ENDSTOP == _YMIN_
- #define Z4_MAX_PIN Y_MIN_PIN
- #elif Z4_USE_ENDSTOP == _YMAX_
- #define Z4_MAX_PIN Y_MAX_PIN
- #elif Z4_USE_ENDSTOP == _YSTOP_
- #define Z4_MAX_PIN Y_STOP_PIN
- #elif Z4_USE_ENDSTOP == _ZMIN_
- #define Z4_MAX_PIN Z_MIN_PIN
- #elif Z4_USE_ENDSTOP == _ZMAX_
- #define Z4_MAX_PIN Z_MAX_PIN
- #elif Z4_USE_ENDSTOP == _ZSTOP_
- #define Z4_MAX_PIN Z_STOP_PIN
- #elif Z4_USE_ENDSTOP == _XDIAG_
- #define Z4_MAX_PIN X_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _YDIAG_
- #define Z4_MAX_PIN Y_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _ZDIAG_
- #define Z4_MAX_PIN Z_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _E0DIAG_
- #define Z4_MAX_PIN E0_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _E1DIAG_
- #define Z4_MAX_PIN E1_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _E2DIAG_
- #define Z4_MAX_PIN E2_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _E3DIAG_
- #define Z4_MAX_PIN E3_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _E4DIAG_
- #define Z4_MAX_PIN E4_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _E5DIAG_
- #define Z4_MAX_PIN E5_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _E6DIAG_
- #define Z4_MAX_PIN E6_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _E7DIAG_
- #define Z4_MAX_PIN E7_DIAG_PIN
- #endif
- #endif
- #ifndef Z4_MIN_ENDSTOP_INVERTING
- #define Z4_MIN_ENDSTOP_INVERTING false
- #endif
#else
#ifndef Z4_MIN_ENDSTOP_INVERTING
#if Z4_USE_ENDSTOP == _XMIN_
@@ -1524,56 +1116,14 @@
#define Z4_MIN_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING
#elif Z4_USE_ENDSTOP == _ZMAX_
#define Z4_MIN_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING
- #else
- #define Z4_MIN_ENDSTOP_INVERTING false
#endif
#endif
- #ifndef Z4_MIN_PIN
- #if Z4_USE_ENDSTOP == _XMIN_
- #define Z4_MIN_PIN X_MIN_PIN
- #elif Z4_USE_ENDSTOP == _XMAX_
- #define Z4_MIN_PIN X_MAX_PIN
- #elif Z4_USE_ENDSTOP == _XSTOP_
- #define Z4_MIN_PIN X_STOP_PIN
- #elif Z4_USE_ENDSTOP == _YMIN_
- #define Z4_MIN_PIN Y_MIN_PIN
- #elif Z4_USE_ENDSTOP == _YMAX_
- #define Z4_MIN_PIN Y_MAX_PIN
- #elif Z4_USE_ENDSTOP == _YSTOP_
- #define Z4_MIN_PIN Y_STOP_PIN
- #elif Z4_USE_ENDSTOP == _ZMIN_
- #define Z4_MIN_PIN Z_MIN_PIN
- #elif Z4_USE_ENDSTOP == _ZMAX_
- #define Z4_MIN_PIN Z_MAX_PIN
- #elif Z4_USE_ENDSTOP == _ZSTOP_
- #define Z4_MIN_PIN Z_STOP_PIN
- #elif Z4_USE_ENDSTOP == _XDIAG_
- #define Z4_MIN_PIN X_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _YDIAG_
- #define Z4_MIN_PIN Y_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _ZDIAG_
- #define Z4_MIN_PIN Z_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _E0DIAG_
- #define Z4_MIN_PIN E0_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _E1DIAG_
- #define Z4_MIN_PIN E1_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _E2DIAG_
- #define Z4_MIN_PIN E2_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _E3DIAG_
- #define Z4_MIN_PIN E3_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _E4DIAG_
- #define Z4_MIN_PIN E4_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _E5DIAG_
- #define Z4_MIN_PIN E5_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _E6DIAG_
- #define Z4_MIN_PIN E6_DIAG_PIN
- #elif Z4_USE_ENDSTOP == _E7DIAG_
- #define Z4_MIN_PIN E7_DIAG_PIN
- #endif
- #endif
- #ifndef Z4_MAX_ENDSTOP_INVERTING
- #define Z4_MAX_ENDSTOP_INVERTING false
- #endif
+ #endif
+ #ifndef Z4_MAX_ENDSTOP_INVERTING
+ #define Z4_MAX_ENDSTOP_INVERTING false
+ #endif
+ #ifndef Z4_MIN_ENDSTOP_INVERTING
+ #define Z4_MIN_ENDSTOP_INVERTING false
#endif
#endif
diff --git a/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp b/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp
index 285729cc15d..4be023df0aa 100644
--- a/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp
+++ b/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp
@@ -72,17 +72,6 @@ void ChironTFT::Startup() {
live_Zoffset = 0.0;
file_menu = AC_menu_file;
- // Setup pins for powerloss detection
- // Two IO pins are connected on the Trigorilla Board
- // On a power interruption the OUTAGECON_PIN goes low.
-
- #if ENABLED(POWER_LOSS_RECOVERY)
- OUT_WRITE(OUTAGECON_PIN, HIGH);
- #endif
-
- // Filament runout is handled by Marlin settings in Configuration.h
- // opt_set FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present.
- // opt_enable FIL_RUNOUT_PULLUP
TFTSer.begin(115200);
// Wait for the TFT panel to initialize and finish the animation
diff --git a/Marlin/src/pins/pinsDebug_list.h b/Marlin/src/pins/pinsDebug_list.h
index 077c94a60f8..39e07c739a2 100644
--- a/Marlin/src/pins/pinsDebug_list.h
+++ b/Marlin/src/pins/pinsDebug_list.h
@@ -883,6 +883,9 @@
#if PIN_EXISTS(SAFE_POWER)
REPORT_NAME_DIGITAL(__LINE__, SAFE_POWER_PIN)
#endif
+#if PIN_EXISTS(OUTAGECON)
+ REPORT_NAME_DIGITAL(__LINE__, OUTAGECON_PIN)
+#endif
#if PIN_EXISTS(POWER_LOSS)
REPORT_NAME_DIGITAL(__LINE__, POWER_LOSS_PIN)
#endif
diff --git a/Marlin/src/pins/pins_postprocess.h b/Marlin/src/pins/pins_postprocess.h
index 7656037f3da..1e5265b5966 100644
--- a/Marlin/src/pins/pins_postprocess.h
+++ b/Marlin/src/pins/pins_postprocess.h
@@ -1857,6 +1857,497 @@
#undef Z4_MAX_PIN
#endif
+/**
+ * X_DUAL_ENDSTOPS endstop reassignment
+ */
+#if ENABLED(X_DUAL_ENDSTOPS)
+ #if X_HOME_TO_MAX
+ #ifndef X2_MAX_PIN
+ #if PIN_EXISTS(X2_STOP)
+ #define X2_MAX_PIN X2_STOP_PIN
+ #elif X2_USE_ENDSTOP == _XMIN_
+ #define X2_MAX_PIN X_MIN_PIN
+ #elif X2_USE_ENDSTOP == _XMAX_
+ #define X2_MAX_PIN X_MAX_PIN
+ #elif X2_USE_ENDSTOP == _XSTOP_
+ #define X2_MAX_PIN X_STOP_PIN
+ #elif X2_USE_ENDSTOP == _YMIN_
+ #define X2_MAX_PIN Y_MIN_PIN
+ #elif X2_USE_ENDSTOP == _YMAX_
+ #define X2_MAX_PIN Y_MAX_PIN
+ #elif X2_USE_ENDSTOP == _YSTOP_
+ #define X2_MAX_PIN Y_STOP_PIN
+ #elif X2_USE_ENDSTOP == _ZMIN_
+ #define X2_MAX_PIN Z_MIN_PIN
+ #elif X2_USE_ENDSTOP == _ZMAX_
+ #define X2_MAX_PIN Z_MAX_PIN
+ #elif X2_USE_ENDSTOP == _ZSTOP_
+ #define X2_MAX_PIN Z_STOP_PIN
+ #elif X2_USE_ENDSTOP == _XDIAG_
+ #define X2_MAX_PIN X_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _YDIAG_
+ #define X2_MAX_PIN Y_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _ZDIAG_
+ #define X2_MAX_PIN Z_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _E0DIAG_
+ #define X2_MAX_PIN E0_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _E1DIAG_
+ #define X2_MAX_PIN E1_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _E2DIAG_
+ #define X2_MAX_PIN E2_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _E3DIAG_
+ #define X2_MAX_PIN E3_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _E4DIAG_
+ #define X2_MAX_PIN E4_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _E5DIAG_
+ #define X2_MAX_PIN E5_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _E6DIAG_
+ #define X2_MAX_PIN E6_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _E7DIAG_
+ #define X2_MAX_PIN E7_DIAG_PIN
+ #endif
+ #endif
+ #else
+ #ifndef X2_MIN_PIN
+ #if PIN_EXISTS(X2_STOP)
+ #define X2_MIN_PIN X2_STOP_PIN
+ #elif X2_USE_ENDSTOP == _XMIN_
+ #define X2_MIN_PIN X_MIN_PIN
+ #elif X2_USE_ENDSTOP == _XMAX_
+ #define X2_MIN_PIN X_MAX_PIN
+ #elif X2_USE_ENDSTOP == _XSTOP_
+ #define X2_MIN_PIN X_STOP_PIN
+ #elif X2_USE_ENDSTOP == _YMIN_
+ #define X2_MIN_PIN Y_MIN_PIN
+ #elif X2_USE_ENDSTOP == _YMAX_
+ #define X2_MIN_PIN Y_MAX_PIN
+ #elif X2_USE_ENDSTOP == _YSTOP_
+ #define X2_MIN_PIN Y_STOP_PIN
+ #elif X2_USE_ENDSTOP == _ZMIN_
+ #define X2_MIN_PIN Z_MIN_PIN
+ #elif X2_USE_ENDSTOP == _ZMAX_
+ #define X2_MIN_PIN Z_MAX_PIN
+ #elif X2_USE_ENDSTOP == _ZSTOP_
+ #define X2_MIN_PIN Z_STOP_PIN
+ #elif X2_USE_ENDSTOP == _XDIAG_
+ #define X2_MIN_PIN X_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _YDIAG_
+ #define X2_MIN_PIN Y_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _ZDIAG_
+ #define X2_MIN_PIN Z_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _E0DIAG_
+ #define X2_MIN_PIN E0_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _E1DIAG_
+ #define X2_MIN_PIN E1_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _E2DIAG_
+ #define X2_MIN_PIN E2_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _E3DIAG_
+ #define X2_MIN_PIN E3_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _E4DIAG_
+ #define X2_MIN_PIN E4_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _E5DIAG_
+ #define X2_MIN_PIN E5_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _E6DIAG_
+ #define X2_MIN_PIN E6_DIAG_PIN
+ #elif X2_USE_ENDSTOP == _E7DIAG_
+ #define X2_MIN_PIN E7_DIAG_PIN
+ #endif
+ #endif
+ #endif
+#endif
+
+/**
+ * Y_DUAL_ENDSTOPS endstop reassignment
+ */
+#if ENABLED(Y_DUAL_ENDSTOPS)
+ #if Y_HOME_TO_MAX
+ #ifndef Y2_MAX_PIN
+ #if PIN_EXISTS(Y2_STOP)
+ #define Y2_MAX_PIN Y2_STOP_PIN
+ #elif Y2_USE_ENDSTOP == _XMIN_
+ #define Y2_MAX_PIN X_MIN_PIN
+ #elif Y2_USE_ENDSTOP == _XMAX_
+ #define Y2_MAX_PIN X_MAX_PIN
+ #elif Y2_USE_ENDSTOP == _XSTOP_
+ #define Y2_MAX_PIN X_STOP_PIN
+ #elif Y2_USE_ENDSTOP == _YMIN_
+ #define Y2_MAX_PIN Y_MIN_PIN
+ #elif Y2_USE_ENDSTOP == _YMAX_
+ #define Y2_MAX_PIN Y_MAX_PIN
+ #elif Y2_USE_ENDSTOP == _YSTOP_
+ #define Y2_MAX_PIN Y_STOP_PIN
+ #elif Y2_USE_ENDSTOP == _ZMIN_
+ #define Y2_MAX_PIN Z_MIN_PIN
+ #elif Y2_USE_ENDSTOP == _ZMAX_
+ #define Y2_MAX_PIN Z_MAX_PIN
+ #elif Y2_USE_ENDSTOP == _ZSTOP_
+ #define Y2_MAX_PIN Z_STOP_PIN
+ #elif Y2_USE_ENDSTOP == _XDIAG_
+ #define Y2_MAX_PIN X_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _YDIAG_
+ #define Y2_MAX_PIN Y_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _ZDIAG_
+ #define Y2_MAX_PIN Z_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _E0DIAG_
+ #define Y2_MAX_PIN E0_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _E1DIAG_
+ #define Y2_MAX_PIN E1_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _E2DIAG_
+ #define Y2_MAX_PIN E2_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _E3DIAG_
+ #define Y2_MAX_PIN E3_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _E4DIAG_
+ #define Y2_MAX_PIN E4_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _E5DIAG_
+ #define Y2_MAX_PIN E5_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _E6DIAG_
+ #define Y2_MAX_PIN E6_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _E7DIAG_
+ #define Y2_MAX_PIN E7_DIAG_PIN
+ #endif
+ #endif
+ #else
+ #ifndef Y2_MIN_PIN
+ #if PIN_EXISTS(Y2_STOP)
+ #define Y2_MIN_PIN Y2_STOP_PIN
+ #elif Y2_USE_ENDSTOP == _XMIN_
+ #define Y2_MIN_PIN X_MIN_PIN
+ #elif Y2_USE_ENDSTOP == _XMAX_
+ #define Y2_MIN_PIN X_MAX_PIN
+ #elif Y2_USE_ENDSTOP == _XSTOP_
+ #define Y2_MIN_PIN X_STOP_PIN
+ #elif Y2_USE_ENDSTOP == _YMIN_
+ #define Y2_MIN_PIN Y_MIN_PIN
+ #elif Y2_USE_ENDSTOP == _YMAX_
+ #define Y2_MIN_PIN Y_MAX_PIN
+ #elif Y2_USE_ENDSTOP == _YSTOP_
+ #define Y2_MIN_PIN Y_STOP_PIN
+ #elif Y2_USE_ENDSTOP == _ZMIN_
+ #define Y2_MIN_PIN Z_MIN_PIN
+ #elif Y2_USE_ENDSTOP == _ZMAX_
+ #define Y2_MIN_PIN Z_MAX_PIN
+ #elif Y2_USE_ENDSTOP == _ZSTOP_
+ #define Y2_MIN_PIN Z_STOP_PIN
+ #elif Y2_USE_ENDSTOP == _XDIAG_
+ #define Y2_MIN_PIN X_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _YDIAG_
+ #define Y2_MIN_PIN Y_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _ZDIAG_
+ #define Y2_MIN_PIN Z_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _E0DIAG_
+ #define Y2_MIN_PIN E0_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _E1DIAG_
+ #define Y2_MIN_PIN E1_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _E2DIAG_
+ #define Y2_MIN_PIN E2_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _E3DIAG_
+ #define Y2_MIN_PIN E3_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _E4DIAG_
+ #define Y2_MIN_PIN E4_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _E5DIAG_
+ #define Y2_MIN_PIN E5_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _E6DIAG_
+ #define Y2_MIN_PIN E6_DIAG_PIN
+ #elif Y2_USE_ENDSTOP == _E7DIAG_
+ #define Y2_MIN_PIN E7_DIAG_PIN
+ #endif
+ #endif
+ #endif
+#endif
+
+/**
+ * Z_MULTI_ENDSTOPS endstop reassignment
+ */
+#if ENABLED(Z_MULTI_ENDSTOPS)
+
+ #if Z_HOME_TO_MAX
+ #ifndef Z2_MAX_PIN
+ #if PIN_EXISTS(Z2_STOP)
+ #define Z2_MAX_PIN Z2_STOP_PIN
+ #elif Z2_USE_ENDSTOP == _XMIN_
+ #define Z2_MAX_PIN X_MIN_PIN
+ #elif Z2_USE_ENDSTOP == _XMAX_
+ #define Z2_MAX_PIN X_MAX_PIN
+ #elif Z2_USE_ENDSTOP == _XSTOP_
+ #define Z2_MAX_PIN X_STOP_PIN
+ #elif Z2_USE_ENDSTOP == _YMIN_
+ #define Z2_MAX_PIN Y_MIN_PIN
+ #elif Z2_USE_ENDSTOP == _YMAX_
+ #define Z2_MAX_PIN Y_MAX_PIN
+ #elif Z2_USE_ENDSTOP == _YSTOP_
+ #define Z2_MAX_PIN Y_STOP_PIN
+ #elif Z2_USE_ENDSTOP == _ZMIN_
+ #define Z2_MAX_PIN Z_MIN_PIN
+ #elif Z2_USE_ENDSTOP == _ZMAX_
+ #define Z2_MAX_PIN Z_MAX_PIN
+ #elif Z2_USE_ENDSTOP == _ZSTOP_
+ #define Z2_MAX_PIN Z_STOP_PIN
+ #elif Z2_USE_ENDSTOP == _XDIAG_
+ #define Z2_MAX_PIN X_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _YDIAG_
+ #define Z2_MAX_PIN Y_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _ZDIAG_
+ #define Z2_MAX_PIN Z_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _E0DIAG_
+ #define Z2_MAX_PIN E0_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _E1DIAG_
+ #define Z2_MAX_PIN E1_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _E2DIAG_
+ #define Z2_MAX_PIN E2_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _E3DIAG_
+ #define Z2_MAX_PIN E3_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _E4DIAG_
+ #define Z2_MAX_PIN E4_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _E5DIAG_
+ #define Z2_MAX_PIN E5_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _E6DIAG_
+ #define Z2_MAX_PIN E6_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _E7DIAG_
+ #define Z2_MAX_PIN E7_DIAG_PIN
+ #endif
+ #endif
+ #else
+ #ifndef Z2_MIN_PIN
+ #if PIN_EXISTS(Z2_STOP)
+ #define Z2_MIN_PIN Z2_STOP_PIN
+ #elif Z2_USE_ENDSTOP == _XMIN_
+ #define Z2_MIN_PIN X_MIN_PIN
+ #elif Z2_USE_ENDSTOP == _XMAX_
+ #define Z2_MIN_PIN X_MAX_PIN
+ #elif Z2_USE_ENDSTOP == _XSTOP_
+ #define Z2_MIN_PIN X_STOP_PIN
+ #elif Z2_USE_ENDSTOP == _YMIN_
+ #define Z2_MIN_PIN Y_MIN_PIN
+ #elif Z2_USE_ENDSTOP == _YMAX_
+ #define Z2_MIN_PIN Y_MAX_PIN
+ #elif Z2_USE_ENDSTOP == _YSTOP_
+ #define Z2_MIN_PIN Y_STOP_PIN
+ #elif Z2_USE_ENDSTOP == _ZMIN_
+ #define Z2_MIN_PIN Z_MIN_PIN
+ #elif Z2_USE_ENDSTOP == _ZMAX_
+ #define Z2_MIN_PIN Z_MAX_PIN
+ #elif Z2_USE_ENDSTOP == _ZSTOP_
+ #define Z2_MIN_PIN Z_STOP_PIN
+ #elif Z2_USE_ENDSTOP == _XDIAG_
+ #define Z2_MIN_PIN X_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _YDIAG_
+ #define Z2_MIN_PIN Y_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _ZDIAG_
+ #define Z2_MIN_PIN Z_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _E0DIAG_
+ #define Z2_MIN_PIN E0_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _E1DIAG_
+ #define Z2_MIN_PIN E1_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _E2DIAG_
+ #define Z2_MIN_PIN E2_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _E3DIAG_
+ #define Z2_MIN_PIN E3_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _E4DIAG_
+ #define Z2_MIN_PIN E4_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _E5DIAG_
+ #define Z2_MIN_PIN E5_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _E6DIAG_
+ #define Z2_MIN_PIN E6_DIAG_PIN
+ #elif Z2_USE_ENDSTOP == _E7DIAG_
+ #define Z2_MIN_PIN E7_DIAG_PIN
+ #endif
+ #endif
+ #endif
+
+ #if NUM_Z_STEPPERS >= 3
+ #if Z_HOME_TO_MAX
+ #ifndef Z3_MAX_PIN
+ #if PIN_EXISTS(Z3_STOP)
+ #define Z3_MAX_PIN Z3_STOP_PIN
+ #elif Z3_USE_ENDSTOP == _XMIN_
+ #define Z3_MAX_PIN X_MIN_PIN
+ #elif Z3_USE_ENDSTOP == _XMAX_
+ #define Z3_MAX_PIN X_MAX_PIN
+ #elif Z3_USE_ENDSTOP == _XSTOP_
+ #define Z3_MAX_PIN X_STOP_PIN
+ #elif Z3_USE_ENDSTOP == _YMIN_
+ #define Z3_MAX_PIN Y_MIN_PIN
+ #elif Z3_USE_ENDSTOP == _YMAX_
+ #define Z3_MAX_PIN Y_MAX_PIN
+ #elif Z3_USE_ENDSTOP == _YSTOP_
+ #define Z3_MAX_PIN Y_STOP_PIN
+ #elif Z3_USE_ENDSTOP == _ZMIN_
+ #define Z3_MAX_PIN Z_MIN_PIN
+ #elif Z3_USE_ENDSTOP == _ZMAX_
+ #define Z3_MAX_PIN Z_MAX_PIN
+ #elif Z3_USE_ENDSTOP == _ZSTOP_
+ #define Z3_MAX_PIN Z_STOP_PIN
+ #elif Z3_USE_ENDSTOP == _XDIAG_
+ #define Z3_MAX_PIN X_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _YDIAG_
+ #define Z3_MAX_PIN Y_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _ZDIAG_
+ #define Z3_MAX_PIN Z_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _E0DIAG_
+ #define Z3_MAX_PIN E0_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _E1DIAG_
+ #define Z3_MAX_PIN E1_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _E2DIAG_
+ #define Z3_MAX_PIN E2_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _E3DIAG_
+ #define Z3_MAX_PIN E3_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _E4DIAG_
+ #define Z3_MAX_PIN E4_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _E5DIAG_
+ #define Z3_MAX_PIN E5_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _E6DIAG_
+ #define Z3_MAX_PIN E6_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _E7DIAG_
+ #define Z3_MAX_PIN E7_DIAG_PIN
+ #endif
+ #endif
+ #else
+ #ifndef Z3_MIN_PIN
+ #if PIN_EXISTS(Z3_STOP)
+ #define Z3_MIN_PIN Z3_STOP_PIN
+ #elif Z3_USE_ENDSTOP == _XMIN_
+ #define Z3_MIN_PIN X_MIN_PIN
+ #elif Z3_USE_ENDSTOP == _XMAX_
+ #define Z3_MIN_PIN X_MAX_PIN
+ #elif Z3_USE_ENDSTOP == _XSTOP_
+ #define Z3_MIN_PIN X_STOP_PIN
+ #elif Z3_USE_ENDSTOP == _YMIN_
+ #define Z3_MIN_PIN Y_MIN_PIN
+ #elif Z3_USE_ENDSTOP == _YMAX_
+ #define Z3_MIN_PIN Y_MAX_PIN
+ #elif Z3_USE_ENDSTOP == _YSTOP_
+ #define Z3_MIN_PIN Y_STOP_PIN
+ #elif Z3_USE_ENDSTOP == _ZMIN_
+ #define Z3_MIN_PIN Z_MIN_PIN
+ #elif Z3_USE_ENDSTOP == _ZMAX_
+ #define Z3_MIN_PIN Z_MAX_PIN
+ #elif Z3_USE_ENDSTOP == _ZSTOP_
+ #define Z3_MIN_PIN Z_STOP_PIN
+ #elif Z3_USE_ENDSTOP == _XDIAG_
+ #define Z3_MIN_PIN X_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _YDIAG_
+ #define Z3_MIN_PIN Y_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _ZDIAG_
+ #define Z3_MIN_PIN Z_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _E0DIAG_
+ #define Z3_MIN_PIN E0_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _E1DIAG_
+ #define Z3_MIN_PIN E1_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _E2DIAG_
+ #define Z3_MIN_PIN E2_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _E3DIAG_
+ #define Z3_MIN_PIN E3_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _E4DIAG_
+ #define Z3_MIN_PIN E4_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _E5DIAG_
+ #define Z3_MIN_PIN E5_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _E6DIAG_
+ #define Z3_MIN_PIN E6_DIAG_PIN
+ #elif Z3_USE_ENDSTOP == _E7DIAG_
+ #define Z3_MIN_PIN E7_DIAG_PIN
+ #endif
+ #endif
+ #endif
+ #endif
+
+ #if NUM_Z_STEPPERS >= 4
+ #if Z_HOME_TO_MAX
+ #ifndef Z4_MAX_PIN
+ #if PIN_EXISTS(Z4_STOP)
+ #define Z4_MAX_PIN Z4_STOP_PIN
+ #elif Z4_USE_ENDSTOP == _XMIN_
+ #define Z4_MAX_PIN X_MIN_PIN
+ #elif Z4_USE_ENDSTOP == _XMAX_
+ #define Z4_MAX_PIN X_MAX_PIN
+ #elif Z4_USE_ENDSTOP == _XSTOP_
+ #define Z4_MAX_PIN X_STOP_PIN
+ #elif Z4_USE_ENDSTOP == _YMIN_
+ #define Z4_MAX_PIN Y_MIN_PIN
+ #elif Z4_USE_ENDSTOP == _YMAX_
+ #define Z4_MAX_PIN Y_MAX_PIN
+ #elif Z4_USE_ENDSTOP == _YSTOP_
+ #define Z4_MAX_PIN Y_STOP_PIN
+ #elif Z4_USE_ENDSTOP == _ZMIN_
+ #define Z4_MAX_PIN Z_MIN_PIN
+ #elif Z4_USE_ENDSTOP == _ZMAX_
+ #define Z4_MAX_PIN Z_MAX_PIN
+ #elif Z4_USE_ENDSTOP == _ZSTOP_
+ #define Z4_MAX_PIN Z_STOP_PIN
+ #elif Z4_USE_ENDSTOP == _XDIAG_
+ #define Z4_MAX_PIN X_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _YDIAG_
+ #define Z4_MAX_PIN Y_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _ZDIAG_
+ #define Z4_MAX_PIN Z_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _E0DIAG_
+ #define Z4_MAX_PIN E0_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _E1DIAG_
+ #define Z4_MAX_PIN E1_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _E2DIAG_
+ #define Z4_MAX_PIN E2_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _E3DIAG_
+ #define Z4_MAX_PIN E3_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _E4DIAG_
+ #define Z4_MAX_PIN E4_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _E5DIAG_
+ #define Z4_MAX_PIN E5_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _E6DIAG_
+ #define Z4_MAX_PIN E6_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _E7DIAG_
+ #define Z4_MAX_PIN E7_DIAG_PIN
+ #endif
+ #endif
+ #else
+ #ifndef Z4_MIN_PIN
+ #if PIN_EXISTS(Z4_STOP)
+ #define Z4_MIN_PIN Z4_STOP_PIN
+ #elif Z4_USE_ENDSTOP == _XMIN_
+ #define Z4_MIN_PIN X_MIN_PIN
+ #elif Z4_USE_ENDSTOP == _XMAX_
+ #define Z4_MIN_PIN X_MAX_PIN
+ #elif Z4_USE_ENDSTOP == _XSTOP_
+ #define Z4_MIN_PIN X_STOP_PIN
+ #elif Z4_USE_ENDSTOP == _YMIN_
+ #define Z4_MIN_PIN Y_MIN_PIN
+ #elif Z4_USE_ENDSTOP == _YMAX_
+ #define Z4_MIN_PIN Y_MAX_PIN
+ #elif Z4_USE_ENDSTOP == _YSTOP_
+ #define Z4_MIN_PIN Y_STOP_PIN
+ #elif Z4_USE_ENDSTOP == _ZMIN_
+ #define Z4_MIN_PIN Z_MIN_PIN
+ #elif Z4_USE_ENDSTOP == _ZMAX_
+ #define Z4_MIN_PIN Z_MAX_PIN
+ #elif Z4_USE_ENDSTOP == _ZSTOP_
+ #define Z4_MIN_PIN Z_STOP_PIN
+ #elif Z4_USE_ENDSTOP == _XDIAG_
+ #define Z4_MIN_PIN X_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _YDIAG_
+ #define Z4_MIN_PIN Y_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _ZDIAG_
+ #define Z4_MIN_PIN Z_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _E0DIAG_
+ #define Z4_MIN_PIN E0_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _E1DIAG_
+ #define Z4_MIN_PIN E1_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _E2DIAG_
+ #define Z4_MIN_PIN E2_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _E3DIAG_
+ #define Z4_MIN_PIN E3_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _E4DIAG_
+ #define Z4_MIN_PIN E4_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _E5DIAG_
+ #define Z4_MIN_PIN E5_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _E6DIAG_
+ #define Z4_MIN_PIN E6_DIAG_PIN
+ #elif Z4_USE_ENDSTOP == _E7DIAG_
+ #define Z4_MIN_PIN E7_DIAG_PIN
+ #endif
+ #endif
+ #endif
+ #endif
+
+#endif // Z_MULTI_ENDSTOPS
+
//
// Default DOGLCD SPI delays
//
diff --git a/Marlin/src/pins/ramps/pins_RAMPS.h b/Marlin/src/pins/ramps/pins_RAMPS.h
index a0edb01a2a3..7b0ae64cfcf 100644
--- a/Marlin/src/pins/ramps/pins_RAMPS.h
+++ b/Marlin/src/pins/ramps/pins_RAMPS.h
@@ -233,16 +233,22 @@
#define HEATER_0_PIN MOSFET_A_PIN
#if FET_ORDER_EFB // Hotend, Fan, Bed
- #define HEATER_BED_PIN MOSFET_C_PIN
+ #ifndef HEATER_BED_PIN
+ #define HEATER_BED_PIN MOSFET_C_PIN
+ #endif
#elif FET_ORDER_EEF // Hotend, Hotend, Fan
#define HEATER_1_PIN MOSFET_B_PIN
#elif FET_ORDER_EEB // Hotend, Hotend, Bed
#define HEATER_1_PIN MOSFET_B_PIN
- #define HEATER_BED_PIN MOSFET_C_PIN
+ #ifndef HEATER_BED_PIN
+ #define HEATER_BED_PIN MOSFET_C_PIN
+ #endif
#elif FET_ORDER_EFF // Hotend, Fan, Fan
#define FAN1_PIN MOSFET_C_PIN
#elif DISABLED(FET_ORDER_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE")
- #define HEATER_BED_PIN MOSFET_C_PIN
+ #ifndef HEATER_BED_PIN
+ #define HEATER_BED_PIN MOSFET_C_PIN
+ #endif
#if EITHER(HAS_MULTI_HOTEND, HEATERS_PARALLEL)
#define HEATER_1_PIN MOSFET_D_PIN
#else
diff --git a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h
index b685ff0094d..1156804b7c0 100644
--- a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h
+++ b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h
@@ -40,78 +40,94 @@
//
// PWM FETS
//
-#if EITHER(FET_ORDER_EEF, FET_ORDER_EEB)
- #define MOSFET_B_PIN 45 // HEATER1
-#elif FET_ORDER_EFB
- #define MOSFET_B_PIN 9 // FAN0
-#else
- #define MOSFET_B_PIN 7 // FAN1
-#endif
-
-#if FET_ORDER_EEB
- #define MOSFET_C_PIN 8 // BED
-#elif FET_ORDER_EFB
- #if DISABLED(ANYCUBIC_LCD_CHIRON)
- #define MOSFET_C_PIN 8
- #else
- #define MOSFET_C_PIN 45
- #endif
-#else // EEF, EFF
- #define MOSFET_C_PIN 9
-#endif
-
-#if FET_ORDER_EEB
- #define FAN_PIN 9 // Override pin 4 in pins_RAMPS.h
-#endif
+#define MOSFET_B_PIN 45 // HEATER1
//
// Heaters / Fans
//
-#if ANY(FET_ORDER_EEF, FET_ORDER_EEB, FET_ORDER_EFB)
- #define FAN1_PIN 7
-#endif
-#define FAN2_PIN 44
+#define FAN_PIN 9 // FAN0
+#define FAN1_PIN 7 // FAN1
+#define FAN2_PIN 44 // FAN2
#ifndef E0_AUTO_FAN_PIN
- #define E0_AUTO_FAN_PIN 44 // Used in Anycubic Kossel example config
-#endif
-#if ENABLED(ANYCUBIC_LCD_I3MEGA)
- #define CONTROLLER_FAN_PIN 7
+ #define E0_AUTO_FAN_PIN FAN2_PIN
#endif
//
-// AnyCubic standard pin mappings
+// AnyCubic pin mappings
+//
+// Define the appropriate mapping option in Configuration.h:
+// - TRIGORILLA_MAPPING_CHIRON
+// - TRIGORILLA_MAPPING_I3MEGA
//
-// On most printers, endstops are NOT all wired to the appropriate pins on the Trigorilla board.
-// For instance, on a Chiron, Y axis goes to an aux connector.
-// There are also other things that have been wired in creative ways.
-// To enable PIN definitions for a specific printer model, #define the appropriate symbol after
-// MOTHERBOARD in Configuration.h
//
// Limit Switches
//
//#define ANYCUBIC_4_MAX_PRO_ENDSTOPS
-
#if ENABLED(ANYCUBIC_4_MAX_PRO_ENDSTOPS)
#define X_MAX_PIN 43
#define Y_STOP_PIN 19
-#elif EITHER(ANYCUBIC_LCD_CHIRON, ANYCUBIC_LCD_I3MEGA)
- #define Y_STOP_PIN 42
- #define Z2_MIN_PIN 43
+#elif EITHER(TRIGORILLA_MAPPING_CHIRON, TRIGORILLA_MAPPING_I3MEGA)
+ // Chiron uses AUX header for Y and Z endstops
+ #define Y_STOP_PIN 42 // AUX
+ #define Z_STOP_PIN 43 // AUX
+ #define Z2_MIN_PIN 18 // Z-
+
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 2
#endif
- #ifndef FIL_RUNOUT_PIN
- #if ENABLED(ANYCUBIC_LCD_CHIRON)
+
+ #define CONTROLLER_FAN_PIN FAN1_PIN
+
+ #if ENABLED(POWER_LOSS_RECOVERY)
+ #define OUTAGETEST_PIN 79
+ #define OUTAGECON_PIN 58
+ #endif
+
+ #if ENABLED(TRIGORILLA_MAPPING_CHIRON)
+ #ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 33
- #else
+ #endif
+
+ // Chiron swaps the Z stepper connections
+ #define Z_STEP_PIN 36
+ #define Z_DIR_PIN 34
+ #define Z_ENABLE_PIN 30
+ #define Z_CS_PIN 44
+
+ #define Z2_STEP_PIN 46
+ #define Z2_DIR_PIN 48
+ #define Z2_ENABLE_PIN 62
+ #define Z2_CS_PIN 40
+
+ #define HEATER_BED_PIN MOSFET_B_PIN // HEATER1
+ #else
+ #ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 19
#endif
#endif
+#endif
+
+#if EITHER(ANYCUBIC_LCD_CHIRON, ANYCUBIC_LCD_I3MEGA)
#define BEEPER_PIN 31
#define SD_DETECT_PIN 49
#endif
+#if HAS_TMC_UART
+ #ifndef X_SERIAL_TX_PIN
+ #define X_SERIAL_TX_PIN SERVO1_PIN
+ #endif
+ #ifndef Y_SERIAL_TX_PIN
+ #define Y_SERIAL_TX_PIN SERVO0_PIN
+ #endif
+ #ifndef Z_SERIAL_TX_PIN
+ #define Z_SERIAL_TX_PIN SERVO3_PIN
+ #endif
+ #ifndef E0_SERIAL_TX_PIN
+ #define E0_SERIAL_TX_PIN SERVO2_PIN
+ #endif
+#endif
+
#include "pins_RAMPS.h"
//