mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-23 12:04:19 +00:00
Implement CRC16, develop mesh allocation table
- Add crc16 utility function - Implement CRC16 for config store, remove old checksum, increment layout version - Move UBL mesh store/load to MarlinSettings; increment UBL_VERSION - Begin to lay out MAT structure, prototype functions, etc. - Rename ubl.state.eeprom_storage_slot to .storage_slot - Misc. optimization - Cleanup/standardize/improve some messages This is a work in progress!
This commit is contained in:
Brian
Scott Lahteine
parent
00d358d92d
commit
7852369987
@ -8341,15 +8341,22 @@ void quickstop_stepper() {
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
// L to load a mesh from the EEPROM
|
||||
if (code_seen('L')) {
|
||||
const int8_t storage_slot = code_has_value() ? code_value_int() : ubl.state.eeprom_storage_slot;
|
||||
const int16_t j = (UBL_LAST_EEPROM_INDEX - ubl.eeprom_start) / sizeof(ubl.z_values);
|
||||
if (!WITHIN(storage_slot, 0, j - 1) || ubl.eeprom_start <= 0) {
|
||||
SERIAL_PROTOCOLLNPGM("?EEPROM storage not available for use.\n");
|
||||
const int8_t storage_slot = code_has_value() ? code_value_int() : ubl.state.storage_slot;
|
||||
const int16_t a = settings.calc_num_meshes();
|
||||
|
||||
if (!a) {
|
||||
SERIAL_PROTOCOLLNPGM("?EEPROM storage not available.");
|
||||
return;
|
||||
}
|
||||
|
||||
ubl.load_mesh(storage_slot);
|
||||
ubl.state.eeprom_storage_slot = storage_slot;
|
||||
if (!WITHIN(storage_slot, 0, a - 1)) {
|
||||
SERIAL_PROTOCOLLNPGM("?Invalid storage slot.");
|
||||
SERIAL_PROTOCOLLNPAIR("?Use 0 to ", a - 1);
|
||||
return;
|
||||
}
|
||||
|
||||
settings.load_mesh(storage_slot);
|
||||
ubl.state.storage_slot = storage_slot;
|
||||
}
|
||||
#endif // AUTO_BED_LEVELING_UBL
|
||||
|
||||
@ -8377,7 +8384,7 @@ void quickstop_stepper() {
|
||||
if (code_seen('L') || code_seen('V')) {
|
||||
ubl.display_map(0); // Currently only supports one map type
|
||||
SERIAL_ECHOLNPAIR("UBL_MESH_VALID = ", UBL_MESH_VALID);
|
||||
SERIAL_ECHOLNPAIR("eeprom_storage_slot = ", ubl.state.eeprom_storage_slot);
|
||||
SERIAL_ECHOLNPAIR("ubl.state.storage_slot = ", ubl.state.storage_slot);
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
@ -36,16 +36,16 @@
|
||||
*
|
||||
*/
|
||||
|
||||
#define EEPROM_VERSION "V37"
|
||||
#define EEPROM_VERSION "V38"
|
||||
|
||||
// Change EEPROM version if these are changed:
|
||||
#define EEPROM_OFFSET 100
|
||||
|
||||
/**
|
||||
* V37 EEPROM Layout:
|
||||
* V38 EEPROM Layout:
|
||||
*
|
||||
* 100 Version (char x4)
|
||||
* 104 EEPROM Checksum (uint16_t)
|
||||
* 104 EEPROM CRC16 (uint16_t)
|
||||
*
|
||||
* 106 E_STEPPERS (uint8_t)
|
||||
* 107 M92 XYZE planner.axis_steps_per_mm (float x4 ... x8)
|
||||
@ -90,7 +90,7 @@
|
||||
* AUTO_BED_LEVELING_UBL: 6 bytes
|
||||
* 324 G29 A ubl.state.active (bool)
|
||||
* 325 G29 Z ubl.state.z_offset (float)
|
||||
* 329 G29 S ubl.state.eeprom_storage_slot (int8_t)
|
||||
* 329 G29 S ubl.state.storage_slot (int8_t)
|
||||
*
|
||||
* DELTA: 48 bytes
|
||||
* 348 M666 XYZ endstop_adj (float x3)
|
||||
@ -158,6 +158,14 @@
|
||||
*
|
||||
* 588 Minimum end-point
|
||||
* 1909 (588 + 36 + 9 + 288 + 988) Maximum end-point
|
||||
*
|
||||
* ========================================================================
|
||||
* meshes_begin (between max and min end-point, directly above)
|
||||
* -- MESHES --
|
||||
* meshes_end
|
||||
* -- MAT (Mesh Allocation Table) -- 128 bytes (placeholder size)
|
||||
* mat_end = E2END (0xFFF)
|
||||
*
|
||||
*/
|
||||
#include "configuration_store.h"
|
||||
|
||||
@ -230,18 +238,26 @@ void MarlinSettings::postprocess() {
|
||||
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
|
||||
#define DUMMY_PID_VALUE 3000.0f
|
||||
#define EEPROM_START() int eeprom_index = EEPROM_OFFSET
|
||||
#define EEPROM_SKIP(VAR) eeprom_index += sizeof(VAR)
|
||||
#define EEPROM_WRITE(VAR) write_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc)
|
||||
#define EEPROM_READ(VAR) read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc)
|
||||
#define EEPROM_ASSERT(TST,ERR) if (!(TST)) do{ SERIAL_ERROR_START; SERIAL_ERRORLNPGM(ERR); eeprom_read_error = true; }while(0)
|
||||
|
||||
const char version[4] = EEPROM_VERSION;
|
||||
|
||||
uint16_t MarlinSettings::eeprom_checksum;
|
||||
bool MarlinSettings::eeprom_error;
|
||||
|
||||
bool MarlinSettings::eeprom_write_error,
|
||||
MarlinSettings::eeprom_read_error;
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
int MarlinSettings::meshes_begin;
|
||||
#endif
|
||||
|
||||
void MarlinSettings::write_data(int &pos, const uint8_t* value, uint16_t size) {
|
||||
if (eeprom_write_error) return;
|
||||
void MarlinSettings::write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) {
|
||||
if (eeprom_error) return;
|
||||
while (size--) {
|
||||
uint8_t * const p = (uint8_t * const)pos;
|
||||
const uint8_t v = *value;
|
||||
uint8_t v = *value;
|
||||
// EEPROM has only ~100,000 write cycles,
|
||||
// so only write bytes that have changed!
|
||||
if (v != eeprom_read_byte(p)) {
|
||||
@ -249,32 +265,27 @@ void MarlinSettings::postprocess() {
|
||||
if (eeprom_read_byte(p) != v) {
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE);
|
||||
eeprom_write_error = true;
|
||||
eeprom_error = true;
|
||||
return;
|
||||
}
|
||||
}
|
||||
eeprom_checksum += v;
|
||||
crc16(crc, &v, 1);
|
||||
pos++;
|
||||
value++;
|
||||
};
|
||||
}
|
||||
void MarlinSettings::read_data(int &pos, uint8_t* value, uint16_t size) {
|
||||
|
||||
void MarlinSettings::read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) {
|
||||
if (eeprom_error) return;
|
||||
do {
|
||||
uint8_t c = eeprom_read_byte((unsigned char*)pos);
|
||||
if (!eeprom_read_error) *value = c;
|
||||
eeprom_checksum += c;
|
||||
*value = c;
|
||||
crc16(crc, &c, 1);
|
||||
pos++;
|
||||
value++;
|
||||
} while (--size);
|
||||
}
|
||||
|
||||
#define DUMMY_PID_VALUE 3000.0f
|
||||
#define EEPROM_START() int eeprom_index = EEPROM_OFFSET
|
||||
#define EEPROM_SKIP(VAR) eeprom_index += sizeof(VAR)
|
||||
#define EEPROM_WRITE(VAR) write_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR))
|
||||
#define EEPROM_READ(VAR) read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR))
|
||||
#define EEPROM_ASSERT(TST,ERR) if (!(TST)) do{ SERIAL_ERROR_START; SERIAL_ERRORLNPGM(ERR); eeprom_read_error = true; }while(0)
|
||||
|
||||
/**
|
||||
* M500 - Store Configuration
|
||||
*/
|
||||
@ -282,14 +293,16 @@ void MarlinSettings::postprocess() {
|
||||
float dummy = 0.0f;
|
||||
char ver[4] = "000";
|
||||
|
||||
uint16_t working_crc = 0;
|
||||
|
||||
EEPROM_START();
|
||||
|
||||
eeprom_write_error = false;
|
||||
eeprom_error = false;
|
||||
|
||||
EEPROM_WRITE(ver); // invalidate data first
|
||||
EEPROM_SKIP(eeprom_checksum); // Skip the checksum slot
|
||||
EEPROM_SKIP(working_crc); // Skip the checksum slot
|
||||
|
||||
eeprom_checksum = 0; // clear before first "real data"
|
||||
working_crc = 0; // clear before first "real data"
|
||||
|
||||
const uint8_t esteppers = COUNT(planner.axis_steps_per_mm) - XYZ;
|
||||
EEPROM_WRITE(esteppers);
|
||||
@ -410,14 +423,14 @@ void MarlinSettings::postprocess() {
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
EEPROM_WRITE(ubl.state.active);
|
||||
EEPROM_WRITE(ubl.state.z_offset);
|
||||
EEPROM_WRITE(ubl.state.eeprom_storage_slot);
|
||||
EEPROM_WRITE(ubl.state.storage_slot);
|
||||
#else
|
||||
const bool ubl_active = 0;
|
||||
dummy = 0.0f;
|
||||
const int8_t eeprom_slot = -1;
|
||||
const int8_t storage_slot = -1;
|
||||
EEPROM_WRITE(ubl_active);
|
||||
EEPROM_WRITE(dummy);
|
||||
EEPROM_WRITE(eeprom_slot);
|
||||
EEPROM_WRITE(storage_slot);
|
||||
#endif // AUTO_BED_LEVELING_UBL
|
||||
|
||||
// 9 floats for DELTA / Z_DUAL_ENDSTOPS
|
||||
@ -609,43 +622,42 @@ void MarlinSettings::postprocess() {
|
||||
EEPROM_WRITE(dummy);
|
||||
#endif
|
||||
|
||||
if (!eeprom_write_error) {
|
||||
|
||||
const uint16_t final_checksum = eeprom_checksum,
|
||||
eeprom_size = eeprom_index;
|
||||
if (!eeprom_error) {
|
||||
const int eeprom_size = eeprom_index;
|
||||
|
||||
// Write the EEPROM header
|
||||
eeprom_index = EEPROM_OFFSET;
|
||||
EEPROM_WRITE(version);
|
||||
EEPROM_WRITE(final_checksum);
|
||||
EEPROM_WRITE(working_crc);
|
||||
|
||||
// Report storage size
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR("Settings Stored (", eeprom_size - (EEPROM_OFFSET));
|
||||
SERIAL_ECHOLNPGM(" bytes)");
|
||||
SERIAL_ECHOPAIR(" bytes; crc ", working_crc);
|
||||
SERIAL_ECHOLNPGM(")");
|
||||
}
|
||||
|
||||
#if ENABLED(UBL_SAVE_ACTIVE_ON_M500)
|
||||
if (ubl.state.eeprom_storage_slot >= 0)
|
||||
ubl.store_mesh(ubl.state.eeprom_storage_slot);
|
||||
if (ubl.state.storage_slot >= 0)
|
||||
store_mesh(ubl.state.storage_slot);
|
||||
#endif
|
||||
|
||||
return !eeprom_write_error;
|
||||
return !eeprom_error;
|
||||
}
|
||||
|
||||
/**
|
||||
* M501 - Retrieve Configuration
|
||||
*/
|
||||
bool MarlinSettings::load() {
|
||||
uint16_t working_crc = 0;
|
||||
|
||||
EEPROM_START();
|
||||
eeprom_read_error = false; // If set EEPROM_READ won't write into RAM
|
||||
|
||||
char stored_ver[4];
|
||||
EEPROM_READ(stored_ver);
|
||||
|
||||
uint16_t stored_checksum;
|
||||
EEPROM_READ(stored_checksum);
|
||||
uint16_t stored_crc;
|
||||
EEPROM_READ(stored_crc);
|
||||
|
||||
// Version has to match or defaults are used
|
||||
if (strncmp(version, stored_ver, 3) != 0) {
|
||||
@ -662,7 +674,7 @@ void MarlinSettings::postprocess() {
|
||||
else {
|
||||
float dummy = 0;
|
||||
|
||||
eeprom_checksum = 0; // clear before reading first "real data"
|
||||
working_crc = 0; //clear before reading first "real data"
|
||||
|
||||
// Number of esteppers may change
|
||||
uint8_t esteppers;
|
||||
@ -788,7 +800,7 @@ void MarlinSettings::postprocess() {
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
EEPROM_READ(ubl.state.active);
|
||||
EEPROM_READ(ubl.state.z_offset);
|
||||
EEPROM_READ(ubl.state.eeprom_storage_slot);
|
||||
EEPROM_READ(ubl.state.storage_slot);
|
||||
#else
|
||||
bool dummyb;
|
||||
uint8_t dummyui8;
|
||||
@ -960,27 +972,28 @@ void MarlinSettings::postprocess() {
|
||||
EEPROM_READ(dummy);
|
||||
#endif
|
||||
|
||||
if (eeprom_checksum == stored_checksum) {
|
||||
if (eeprom_read_error)
|
||||
reset();
|
||||
else {
|
||||
if (working_crc == stored_crc) {
|
||||
postprocess();
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHO(version);
|
||||
SERIAL_ECHOPAIR(" stored settings retrieved (", eeprom_index - (EEPROM_OFFSET));
|
||||
SERIAL_ECHOLNPGM(" bytes)");
|
||||
}
|
||||
SERIAL_ECHOPAIR(" bytes; crc ", working_crc);
|
||||
SERIAL_ECHOLNPGM(")");
|
||||
}
|
||||
else {
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ERRORLNPGM("EEPROM checksum mismatch");
|
||||
SERIAL_ERRORPGM("EEPROM checksum mismatch - (stored CRC)");
|
||||
SERIAL_ERROR(stored_crc);
|
||||
SERIAL_ERRORPGM(" != ");
|
||||
SERIAL_ERROR(working_crc);
|
||||
SERIAL_ERRORLNPGM(" (calculated CRC)!");
|
||||
reset();
|
||||
}
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
ubl.eeprom_start = (eeprom_index + 32) & 0xFFF8; // Pad the end of configuration data so it
|
||||
// can float up or down a little bit without
|
||||
// disrupting the Unified Bed Leveling data
|
||||
meshes_begin = (eeprom_index + 32) & 0xFFF8; // Pad the end of configuration data so it
|
||||
// can float up or down a little bit without
|
||||
// disrupting the mesh data
|
||||
SERIAL_ECHOPGM(" UBL ");
|
||||
if (!ubl.state.active) SERIAL_ECHO("not ");
|
||||
SERIAL_ECHOLNPGM("active!");
|
||||
@ -993,9 +1006,9 @@ void MarlinSettings::postprocess() {
|
||||
ubl.reset();
|
||||
}
|
||||
|
||||
if (ubl.state.eeprom_storage_slot >= 0) {
|
||||
ubl.load_mesh(ubl.state.eeprom_storage_slot);
|
||||
SERIAL_ECHOPAIR("Mesh ", ubl.state.eeprom_storage_slot);
|
||||
if (ubl.state.storage_slot >= 0) {
|
||||
load_mesh(ubl.state.storage_slot);
|
||||
SERIAL_ECHOPAIR("Mesh ", ubl.state.storage_slot);
|
||||
SERIAL_ECHOLNPGM(" loaded from storage.");
|
||||
}
|
||||
else {
|
||||
@ -1009,9 +1022,85 @@ void MarlinSettings::postprocess() {
|
||||
report();
|
||||
#endif
|
||||
|
||||
return !eeprom_read_error;
|
||||
return !eeprom_error;
|
||||
}
|
||||
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
int MarlinSettings::calc_num_meshes() {
|
||||
//obviously this will get more sophisticated once we've added an actual MAT
|
||||
|
||||
if (meshes_begin <= 0) return 0;
|
||||
|
||||
return (meshes_end - meshes_begin) / sizeof(ubl.z_values);
|
||||
}
|
||||
|
||||
void MarlinSettings::store_mesh(int8_t slot) {
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
const int a = calc_num_meshes();
|
||||
if (!WITHIN(slot, 0, a - 1)) {
|
||||
SERIAL_PROTOCOLLNPGM("?Invalid slot.");
|
||||
SERIAL_PROTOCOL(a);
|
||||
SERIAL_PROTOCOLLNPGM(" mesh slots available.");
|
||||
SERIAL_PROTOCOLLNPAIR("E2END : ", E2END);
|
||||
SERIAL_PROTOCOLLNPAIR("meshes_end : ", (int)meshes_end);
|
||||
SERIAL_PROTOCOLLNPAIR("slot : ", slot);
|
||||
SERIAL_EOL;
|
||||
return;
|
||||
}
|
||||
|
||||
uint16_t crc = 0;
|
||||
int pos = meshes_end - (slot + 1) * sizeof(ubl.z_values);
|
||||
|
||||
write_data(pos, (uint8_t *)&ubl.z_values, sizeof(ubl.z_values), &crc);
|
||||
|
||||
// Write crc to MAT along with other data, or just tack on to the beginning or end
|
||||
|
||||
SERIAL_PROTOCOLPAIR("Mesh saved in slot ", slot);
|
||||
|
||||
#else
|
||||
|
||||
// Other mesh types
|
||||
|
||||
#endif
|
||||
}
|
||||
|
||||
void MarlinSettings::load_mesh(int8_t slot, void *into /* = 0 */) {
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
const int16_t a = settings.calc_num_meshes();
|
||||
|
||||
if (!WITHIN(slot, 0, a - 1)) {
|
||||
SERIAL_PROTOCOLLNPGM("?Invalid Slot.");
|
||||
SERIAL_PROTOCOL(a);
|
||||
SERIAL_PROTOCOLLNPGM(" mesh slots available.");
|
||||
return;
|
||||
}
|
||||
|
||||
uint16_t crc = 0;
|
||||
int pos = meshes_end - (slot + 1) * sizeof(ubl.z_values);
|
||||
uint8_t * const dest = into ? (uint8_t*)into : (uint8_t*)&ubl.z_values;
|
||||
read_data(pos, dest, sizeof(ubl.z_values), &crc);
|
||||
|
||||
// Compare crc with crc from MAT, or read from end
|
||||
|
||||
SERIAL_PROTOCOLPAIR("Mesh loaded from slot ", slot);
|
||||
|
||||
#else
|
||||
|
||||
// Other mesh types
|
||||
|
||||
#endif
|
||||
}
|
||||
|
||||
//void MarlinSettings::delete_mesh() { return; }
|
||||
//void MarlinSettings::defrag_meshes() { return; }
|
||||
|
||||
#endif // AUTO_BED_LEVELING_UBL
|
||||
|
||||
#else // !EEPROM_SETTINGS
|
||||
|
||||
bool MarlinSettings::save() {
|
||||
@ -1458,7 +1547,18 @@ void MarlinSettings::reset() {
|
||||
#endif
|
||||
SERIAL_EOL;
|
||||
|
||||
if (!forReplay) ubl.g29_what_command();
|
||||
if (!forReplay) {
|
||||
SERIAL_ECHOPGM("\nUBL is ");
|
||||
ubl.state.active ? SERIAL_CHAR('A') : SERIAL_ECHOPGM("Ina");
|
||||
SERIAL_ECHOLNPAIR("ctive\n\nActive Mesh Slot: ", ubl.state.storage_slot);
|
||||
|
||||
SERIAL_ECHOPGM("z_offset: ");
|
||||
SERIAL_ECHO_F(ubl.state.z_offset, 6);
|
||||
SERIAL_EOL;
|
||||
|
||||
SERIAL_ECHOPAIR("EEPROM can hold ", calc_num_meshes());
|
||||
SERIAL_ECHOLNPGM(" meshes.\n");
|
||||
}
|
||||
|
||||
#elif HAS_ABL
|
||||
|
||||
|
||||
@ -34,6 +34,18 @@ class MarlinSettings {
|
||||
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
static bool load();
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL) // Eventually make these available if any leveling system
|
||||
// That can store is enabled
|
||||
FORCE_INLINE static int get_start_of_meshes() { return meshes_begin; }
|
||||
FORCE_INLINE static int get_end_of_meshes() { return meshes_end; }
|
||||
static int calc_num_meshes();
|
||||
static void store_mesh(int8_t slot);
|
||||
static void load_mesh(int8_t slot, void *into = 0);
|
||||
|
||||
//static void delete_mesh(); // necessary if we have a MAT
|
||||
//static void defrag_meshes(); // "
|
||||
#endif
|
||||
#else
|
||||
FORCE_INLINE
|
||||
static bool load() { reset(); report(); return true; }
|
||||
@ -50,10 +62,18 @@ class MarlinSettings {
|
||||
static void postprocess();
|
||||
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
static uint16_t eeprom_checksum;
|
||||
static bool eeprom_read_error, eeprom_write_error;
|
||||
static void write_data(int &pos, const uint8_t* value, uint16_t size);
|
||||
static void read_data(int &pos, uint8_t* value, uint16_t size);
|
||||
static bool eeprom_error;
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL) // Eventually make these available if any leveling system
|
||||
// That can store is enabled
|
||||
static int meshes_begin;
|
||||
const static int mat_end = E2END; // Mesh allocation table; this may not end up being necessary
|
||||
const static int meshes_end = mat_end - 128; // 128 is a placeholder for the size of the MAT
|
||||
|
||||
#endif
|
||||
|
||||
static void write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc);
|
||||
static void read_data(int &pos, uint8_t *value, uint16_t size, uint16_t *crc);
|
||||
#endif
|
||||
};
|
||||
|
||||
|
||||
@ -63,9 +63,6 @@
|
||||
bool unified_bed_leveling::g26_debug_flag = false,
|
||||
unified_bed_leveling::has_control_of_lcd_panel = false;
|
||||
|
||||
int16_t unified_bed_leveling::eeprom_start = -1; // Please stop changing this to 8 bits in size
|
||||
// It needs to hold values bigger than this.
|
||||
|
||||
volatile int unified_bed_leveling::encoder_diff;
|
||||
|
||||
unified_bed_leveling::unified_bed_leveling() {
|
||||
@ -73,53 +70,10 @@
|
||||
reset();
|
||||
}
|
||||
|
||||
void unified_bed_leveling::load_mesh(const int16_t slot) {
|
||||
int16_t j = (UBL_LAST_EEPROM_INDEX - eeprom_start) / sizeof(z_values);
|
||||
|
||||
if (slot == -1) {
|
||||
SERIAL_PROTOCOLLNPGM("?No mesh saved in EEPROM. Zeroing mesh in memory.\n");
|
||||
reset();
|
||||
return;
|
||||
}
|
||||
|
||||
if (!WITHIN(slot, 0, j - 1) || eeprom_start <= 0) {
|
||||
SERIAL_PROTOCOLLNPGM("?EEPROM storage not available to load mesh.\n");
|
||||
return;
|
||||
}
|
||||
|
||||
j = UBL_LAST_EEPROM_INDEX - (slot + 1) * sizeof(z_values);
|
||||
eeprom_read_block((void *)&z_values, (void *)j, sizeof(z_values));
|
||||
|
||||
SERIAL_PROTOCOLPAIR("Mesh loaded from slot ", slot);
|
||||
SERIAL_PROTOCOLLNPAIR(" at offset ", hex_address((void*)j));
|
||||
}
|
||||
|
||||
void unified_bed_leveling::store_mesh(const int16_t slot) {
|
||||
int16_t j = (UBL_LAST_EEPROM_INDEX - eeprom_start) / sizeof(z_values);
|
||||
|
||||
if (!WITHIN(slot, 0, j - 1) || eeprom_start <= 0) {
|
||||
SERIAL_PROTOCOLLNPGM("?EEPROM storage not available to load mesh.\n");
|
||||
SERIAL_PROTOCOL(slot);
|
||||
SERIAL_PROTOCOLLNPGM(" mesh slots available.\n");
|
||||
SERIAL_PROTOCOLLNPAIR("E2END : ", E2END);
|
||||
SERIAL_PROTOCOLLNPAIR("k : ", (int)UBL_LAST_EEPROM_INDEX);
|
||||
SERIAL_PROTOCOLLNPAIR("j : ", j);
|
||||
SERIAL_PROTOCOLLNPAIR("m : ", slot);
|
||||
SERIAL_EOL;
|
||||
return;
|
||||
}
|
||||
|
||||
j = UBL_LAST_EEPROM_INDEX - (slot + 1) * sizeof(z_values);
|
||||
eeprom_write_block((const void *)&z_values, (void *)j, sizeof(z_values));
|
||||
|
||||
SERIAL_PROTOCOLPAIR("Mesh saved in slot ", slot);
|
||||
SERIAL_PROTOCOLLNPAIR(" at offset ", hex_address((void*)j));
|
||||
}
|
||||
|
||||
void unified_bed_leveling::reset() {
|
||||
state.active = false;
|
||||
state.z_offset = 0;
|
||||
state.eeprom_storage_slot = -1;
|
||||
state.storage_slot = -1;
|
||||
|
||||
ZERO(z_values);
|
||||
|
||||
@ -203,9 +157,9 @@
|
||||
bool unified_bed_leveling::sanity_check() {
|
||||
uint8_t error_flag = 0;
|
||||
|
||||
const int j = (UBL_LAST_EEPROM_INDEX - eeprom_start) / sizeof(z_values);
|
||||
if (j < 1) {
|
||||
SERIAL_PROTOCOLLNPGM("?No EEPROM storage available for a mesh of this size.\n");
|
||||
const int a = settings.calc_num_meshes();
|
||||
if (a < 1) {
|
||||
SERIAL_PROTOCOLLNPGM("?Insufficient EEPROM storage for a mesh of this size.");
|
||||
error_flag++;
|
||||
}
|
||||
|
||||
|
||||
14
Marlin/ubl.h
14
Marlin/ubl.h
@ -30,8 +30,9 @@
|
||||
#include "planner.h"
|
||||
#include "math.h"
|
||||
#include "vector_3.h"
|
||||
#include "configuration_store.h"
|
||||
|
||||
#define UBL_VERSION "1.00"
|
||||
#define UBL_VERSION "1.01"
|
||||
#define UBL_OK false
|
||||
#define UBL_ERR true
|
||||
|
||||
@ -92,7 +93,7 @@
|
||||
typedef struct {
|
||||
bool active = false;
|
||||
float z_offset = 0.0;
|
||||
int8_t eeprom_storage_slot = -1;
|
||||
int8_t storage_slot = -1;
|
||||
} ubl_state;
|
||||
|
||||
class unified_bed_leveling {
|
||||
@ -117,10 +118,6 @@
|
||||
void display_map(const int);
|
||||
void reset();
|
||||
void invalidate();
|
||||
void store_state();
|
||||
void load_state();
|
||||
void store_mesh(const int16_t);
|
||||
void load_mesh(const int16_t);
|
||||
bool sanity_check();
|
||||
|
||||
static ubl_state state;
|
||||
@ -153,9 +150,6 @@
|
||||
|
||||
static bool g26_debug_flag, has_control_of_lcd_panel;
|
||||
|
||||
static int16_t eeprom_start; // Please do no change this to 8 bits in size
|
||||
// It needs to hold values bigger than this.
|
||||
|
||||
static volatile int encoder_diff; // Volatile because it's changed at interrupt time.
|
||||
|
||||
unified_bed_leveling();
|
||||
@ -351,7 +345,5 @@
|
||||
|
||||
extern unified_bed_leveling ubl;
|
||||
|
||||
#define UBL_LAST_EEPROM_INDEX E2END
|
||||
|
||||
#endif // AUTO_BED_LEVELING_UBL
|
||||
#endif // UNIFIED_BED_LEVELING_H
|
||||
|
||||
@ -314,7 +314,7 @@
|
||||
|
||||
void __attribute__((optimize("O0"))) gcode_G29() {
|
||||
|
||||
if (ubl.eeprom_start < 0) {
|
||||
if (!settings.calc_num_meshes()) {
|
||||
SERIAL_PROTOCOLLNPGM("?You need to enable your EEPROM and initialize it");
|
||||
SERIAL_PROTOCOLLNPGM("with M502, M500, M501 in that order.\n");
|
||||
return;
|
||||
@ -419,9 +419,9 @@
|
||||
}
|
||||
|
||||
if (code_seen('P')) {
|
||||
if (WITHIN(phase_value, 0, 1) && ubl.state.eeprom_storage_slot == -1) {
|
||||
ubl.state.eeprom_storage_slot = 0;
|
||||
SERIAL_PROTOCOLLNPGM("Default storage slot 0 selected.\n");
|
||||
if (WITHIN(phase_value, 0, 1) && ubl.state.storage_slot == -1) {
|
||||
ubl.state.storage_slot = 0;
|
||||
SERIAL_PROTOCOLLNPGM("Default storage slot 0 selected.");
|
||||
}
|
||||
|
||||
switch (phase_value) {
|
||||
@ -430,7 +430,7 @@
|
||||
// Zero Mesh Data
|
||||
//
|
||||
ubl.reset();
|
||||
SERIAL_PROTOCOLLNPGM("Mesh zeroed.\n");
|
||||
SERIAL_PROTOCOLLNPGM("Mesh zeroed.");
|
||||
break;
|
||||
|
||||
case 1:
|
||||
@ -439,7 +439,7 @@
|
||||
//
|
||||
if (!code_seen('C')) {
|
||||
ubl.invalidate();
|
||||
SERIAL_PROTOCOLLNPGM("Mesh invalidated. Probing mesh.\n");
|
||||
SERIAL_PROTOCOLLNPGM("Mesh invalidated. Probing mesh.");
|
||||
}
|
||||
if (g29_verbose_level > 1) {
|
||||
SERIAL_PROTOCOLPAIR("Probing Mesh Points Closest to (", x_pos);
|
||||
@ -455,7 +455,7 @@
|
||||
//
|
||||
// Manually Probe Mesh in areas that can't be reached by the probe
|
||||
//
|
||||
SERIAL_PROTOCOLLNPGM("Manually probing unreachable mesh locations.\n");
|
||||
SERIAL_PROTOCOLLNPGM("Manually probing unreachable mesh locations.");
|
||||
do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
|
||||
if (!x_flag && !y_flag) {
|
||||
/**
|
||||
@ -485,7 +485,7 @@
|
||||
card_thickness = code_has_value() ? code_value_float() : measure_business_card_thickness(height);
|
||||
|
||||
if (fabs(card_thickness) > 1.5) {
|
||||
SERIAL_PROTOCOLLNPGM("?Error in Business Card measurement.\n");
|
||||
SERIAL_PROTOCOLLNPGM("?Error in Business Card measurement.");
|
||||
return;
|
||||
}
|
||||
}
|
||||
@ -561,17 +561,25 @@
|
||||
//
|
||||
|
||||
if (code_seen('L')) { // Load Current Mesh Data
|
||||
storage_slot = code_has_value() ? code_value_int() : ubl.state.eeprom_storage_slot;
|
||||
storage_slot = code_has_value() ? code_value_int() : ubl.state.storage_slot;
|
||||
|
||||
const int16_t j = (UBL_LAST_EEPROM_INDEX - ubl.eeprom_start) / sizeof(ubl.z_values);
|
||||
int16_t a = settings.calc_num_meshes();
|
||||
|
||||
if (!WITHIN(storage_slot, 0, j - 1) || ubl.eeprom_start <= 0) {
|
||||
SERIAL_PROTOCOLLNPGM("?EEPROM storage not available for use.\n");
|
||||
if (!a) {
|
||||
SERIAL_PROTOCOLLNPGM("?EEPROM storage not available.");
|
||||
return;
|
||||
}
|
||||
ubl.load_mesh(storage_slot);
|
||||
ubl.state.eeprom_storage_slot = storage_slot;
|
||||
SERIAL_PROTOCOLLNPGM("Done.\n");
|
||||
|
||||
if (!WITHIN(storage_slot, 0, a - 1)) {
|
||||
SERIAL_PROTOCOLLNPGM("?Invalid storage slot.");
|
||||
SERIAL_PROTOCOLLNPAIR("?Use 0 to ", a - 1);
|
||||
return;
|
||||
}
|
||||
|
||||
settings.load_mesh(storage_slot);
|
||||
ubl.state.storage_slot = storage_slot;
|
||||
|
||||
SERIAL_PROTOCOLLNPGM("Done.");
|
||||
}
|
||||
|
||||
//
|
||||
@ -579,7 +587,7 @@
|
||||
//
|
||||
|
||||
if (code_seen('S')) { // Store (or Save) Current Mesh Data
|
||||
storage_slot = code_has_value() ? code_value_int() : ubl.state.eeprom_storage_slot;
|
||||
storage_slot = code_has_value() ? code_value_int() : ubl.state.storage_slot;
|
||||
|
||||
if (storage_slot == -1) { // Special case, we are going to 'Export' the mesh to the
|
||||
SERIAL_ECHOLNPGM("G29 I 999"); // host in a form it can be reconstructed on a different machine
|
||||
@ -597,17 +605,23 @@
|
||||
return;
|
||||
}
|
||||
|
||||
const int16_t j = (UBL_LAST_EEPROM_INDEX - ubl.eeprom_start) / sizeof(ubl.z_values);
|
||||
int16_t a = settings.calc_num_meshes();
|
||||
|
||||
if (!WITHIN(storage_slot, 0, j - 1) || ubl.eeprom_start <= 0) {
|
||||
SERIAL_PROTOCOLLNPGM("?EEPROM storage not available for use.\n");
|
||||
SERIAL_PROTOCOLLNPAIR("?Use 0 to ", j - 1);
|
||||
if (!a) {
|
||||
SERIAL_PROTOCOLLNPGM("?EEPROM storage not available.");
|
||||
goto LEAVE;
|
||||
}
|
||||
ubl.store_mesh(storage_slot);
|
||||
ubl.state.eeprom_storage_slot = storage_slot;
|
||||
|
||||
SERIAL_PROTOCOLLNPGM("Done.\n");
|
||||
if (!WITHIN(storage_slot, 0, a - 1)) {
|
||||
SERIAL_PROTOCOLLNPGM("?Invalid storage slot.");
|
||||
SERIAL_PROTOCOLLNPAIR("?Use 0 to ", a - 1);
|
||||
goto LEAVE;
|
||||
}
|
||||
|
||||
settings.store_mesh(storage_slot);
|
||||
ubl.state.storage_slot = storage_slot;
|
||||
|
||||
SERIAL_PROTOCOLLNPGM("Done.");
|
||||
}
|
||||
|
||||
if (code_seen('T'))
|
||||
@ -1157,8 +1171,6 @@
|
||||
* good to have the extra information. Soon... we prune this to just a few items
|
||||
*/
|
||||
void unified_bed_leveling::g29_what_command() {
|
||||
const uint16_t k = E2END - ubl.eeprom_start;
|
||||
|
||||
say_ubl_name();
|
||||
SERIAL_PROTOCOLPGM("System Version " UBL_VERSION " ");
|
||||
if (state.active)
|
||||
@ -1168,10 +1180,10 @@
|
||||
SERIAL_PROTOCOLLNPGM("ctive.\n");
|
||||
safe_delay(50);
|
||||
|
||||
if (state.eeprom_storage_slot == -1)
|
||||
if (state.storage_slot == -1)
|
||||
SERIAL_PROTOCOLPGM("No Mesh Loaded.");
|
||||
else {
|
||||
SERIAL_PROTOCOLPAIR("Mesh ", state.eeprom_storage_slot);
|
||||
SERIAL_PROTOCOLPAIR("Mesh ", state.storage_slot);
|
||||
SERIAL_PROTOCOLPGM(" Loaded.");
|
||||
}
|
||||
SERIAL_EOL;
|
||||
@ -1188,12 +1200,15 @@
|
||||
SERIAL_PROTOCOL_F(zprobe_zoffset, 7);
|
||||
SERIAL_EOL;
|
||||
|
||||
SERIAL_PROTOCOLLNPAIR("ubl.eeprom_start=", hex_address((void*)eeprom_start));
|
||||
|
||||
SERIAL_ECHOLNPAIR("UBL_MESH_MIN_X " STRINGIFY(UBL_MESH_MIN_X) "=", UBL_MESH_MIN_X);
|
||||
SERIAL_ECHOLNPAIR("UBL_MESH_MIN_Y " STRINGIFY(UBL_MESH_MIN_Y) "=", UBL_MESH_MIN_Y);
|
||||
safe_delay(25);
|
||||
SERIAL_ECHOLNPAIR("UBL_MESH_MAX_X " STRINGIFY(UBL_MESH_MAX_X) "=", UBL_MESH_MAX_X);
|
||||
SERIAL_ECHOLNPAIR("UBL_MESH_MAX_Y " STRINGIFY(UBL_MESH_MAX_Y) "=", UBL_MESH_MAX_Y);
|
||||
safe_delay(25);
|
||||
SERIAL_ECHOLNPAIR("GRID_MAX_POINTS_X ", GRID_MAX_POINTS_X);
|
||||
SERIAL_ECHOLNPAIR("GRID_MAX_POINTS_Y ", GRID_MAX_POINTS_Y);
|
||||
safe_delay(25);
|
||||
|
||||
SERIAL_ECHOLNPAIR("MESH_X_DIST ", MESH_X_DIST);
|
||||
SERIAL_ECHOLNPAIR("MESH_Y_DIST ", MESH_Y_DIST);
|
||||
safe_delay(25);
|
||||
@ -1214,40 +1229,36 @@
|
||||
}
|
||||
SERIAL_EOL;
|
||||
|
||||
SERIAL_PROTOCOLLNPAIR("Free EEPROM space starts at: ", hex_address((void*)eeprom_start));
|
||||
SERIAL_PROTOCOLLNPAIR("end of EEPROM: ", hex_address((void*)E2END));
|
||||
safe_delay(25);
|
||||
#if HAS_KILL
|
||||
SERIAL_PROTOCOLPAIR("Kill pin on :", KILL_PIN);
|
||||
SERIAL_PROTOCOLLNPAIR(" state:", READ(KILL_PIN));
|
||||
#endif
|
||||
SERIAL_EOL;
|
||||
safe_delay(50);
|
||||
|
||||
SERIAL_PROTOCOLPAIR("sizeof(ubl.state) : ", (int)sizeof(state));
|
||||
SERIAL_PROTOCOLLNPAIR("ubl_state_at_invocation :", ubl_state_at_invocation);
|
||||
SERIAL_EOL;
|
||||
SERIAL_PROTOCOLLNPAIR("ubl_state_recursion_chk :", ubl_state_recursion_chk);
|
||||
SERIAL_EOL;
|
||||
safe_delay(50);
|
||||
|
||||
SERIAL_PROTOCOLPAIR("Meshes go from ", hex_address((void*)settings.get_start_of_meshes()));
|
||||
SERIAL_PROTOCOLLNPAIR(" to ", hex_address((void*)settings.get_end_of_meshes()));
|
||||
safe_delay(50);
|
||||
|
||||
SERIAL_PROTOCOLLNPAIR("sizeof(ubl) : ", (int)sizeof(ubl));
|
||||
SERIAL_EOL;
|
||||
SERIAL_PROTOCOLLNPAIR("z_value[][] size: ", (int)sizeof(z_values));
|
||||
SERIAL_EOL;
|
||||
safe_delay(25);
|
||||
|
||||
SERIAL_PROTOCOLLNPAIR("EEPROM free for UBL: ", hex_address((void*)k));
|
||||
safe_delay(25);
|
||||
SERIAL_PROTOCOLLNPAIR("EEPROM free for UBL: ", hex_address((void*)(settings.get_end_of_meshes() - settings.get_start_of_meshes())));
|
||||
safe_delay(50);
|
||||
|
||||
SERIAL_PROTOCOLPAIR("EEPROM can hold ", k / sizeof(z_values));
|
||||
SERIAL_PROTOCOLPAIR("EEPROM can hold ", settings.calc_num_meshes());
|
||||
SERIAL_PROTOCOLLNPGM(" meshes.\n");
|
||||
safe_delay(25);
|
||||
|
||||
SERIAL_PROTOCOLPAIR("\nGRID_MAX_POINTS_X ", GRID_MAX_POINTS_X);
|
||||
SERIAL_PROTOCOLPAIR("\nGRID_MAX_POINTS_Y ", GRID_MAX_POINTS_Y);
|
||||
safe_delay(25);
|
||||
SERIAL_EOL;
|
||||
|
||||
SERIAL_ECHOPGM("UBL_MESH_MIN_X " STRINGIFY(UBL_MESH_MIN_X));
|
||||
SERIAL_ECHOLNPAIR("=", UBL_MESH_MIN_X );
|
||||
SERIAL_ECHOPGM("UBL_MESH_MIN_Y " STRINGIFY(UBL_MESH_MIN_Y));
|
||||
SERIAL_ECHOLNPAIR("=", UBL_MESH_MIN_Y );
|
||||
safe_delay(25);
|
||||
|
||||
SERIAL_ECHOPGM("UBL_MESH_MAX_X " STRINGIFY(UBL_MESH_MAX_X));
|
||||
SERIAL_ECHOLNPAIR("=", UBL_MESH_MAX_X);
|
||||
SERIAL_ECHOPGM("UBL_MESH_MAX_Y " STRINGIFY(UBL_MESH_MAX_Y));
|
||||
SERIAL_ECHOLNPAIR("=", UBL_MESH_MAX_Y);
|
||||
safe_delay(25);
|
||||
|
||||
if (!sanity_check()) {
|
||||
say_ubl_name();
|
||||
SERIAL_PROTOCOLLNPGM("sanity checks passed.");
|
||||
@ -1284,27 +1295,31 @@
|
||||
* use cases for the users. So we can wait and see what to do with it.
|
||||
*/
|
||||
void g29_compare_current_mesh_to_stored_mesh() {
|
||||
float tmp_z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y];
|
||||
int16_t a = settings.calc_num_meshes();
|
||||
|
||||
if (!a) {
|
||||
SERIAL_PROTOCOLLNPGM("?EEPROM storage not available.");
|
||||
return;
|
||||
}
|
||||
|
||||
if (!code_has_value()) {
|
||||
SERIAL_PROTOCOLLNPGM("?Mesh # required.\n");
|
||||
SERIAL_PROTOCOLLNPGM("?Storage slot # required.");
|
||||
SERIAL_PROTOCOLLNPAIR("?Use 0 to ", a - 1);
|
||||
return;
|
||||
}
|
||||
|
||||
storage_slot = code_value_int();
|
||||
|
||||
int16_t j = (UBL_LAST_EEPROM_INDEX - ubl.eeprom_start) / sizeof(tmp_z_values);
|
||||
|
||||
if (!WITHIN(storage_slot, 0, j - 1) || ubl.eeprom_start <= 0) {
|
||||
SERIAL_PROTOCOLLNPGM("?EEPROM storage not available for use.\n");
|
||||
if (!WITHIN(storage_slot, 0, a - 1)) {
|
||||
SERIAL_PROTOCOLLNPGM("?Invalid storage slot.");
|
||||
SERIAL_PROTOCOLLNPAIR("?Use 0 to ", a - 1);
|
||||
return;
|
||||
}
|
||||
|
||||
j = UBL_LAST_EEPROM_INDEX - (storage_slot + 1) * sizeof(tmp_z_values);
|
||||
eeprom_read_block((void *)&tmp_z_values, (void *)j, sizeof(tmp_z_values));
|
||||
float tmp_z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y];
|
||||
settings.load_mesh(storage_slot, &tmp_z_values);
|
||||
|
||||
SERIAL_ECHOPAIR("Subtracting Mesh ", storage_slot);
|
||||
SERIAL_PROTOCOLLNPAIR(" loaded from EEPROM address ", hex_address((void*)j)); // Soon, we can remove the extra clutter of printing
|
||||
// the address in the EEPROM where the Mesh is stored.
|
||||
SERIAL_ECHOPAIR("Subtracting current mesh from mesh loaded from slot ", storage_slot);
|
||||
|
||||
for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++)
|
||||
for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++)
|
||||
|
||||
@ -34,6 +34,19 @@ void safe_delay(millis_t ms) {
|
||||
thermalManager.manage_heater(); // This keeps us safe if too many small safe_delay() calls are made
|
||||
}
|
||||
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
|
||||
void crc16(uint16_t *crc, const void * const data, uint16_t cnt) {
|
||||
uint8_t *ptr = (uint8_t*)data;
|
||||
while (cnt-- > 0) {
|
||||
*crc = (uint16_t)(*crc ^ (uint16_t)(((uint16_t)*ptr++) << 8));
|
||||
for (uint8_t x = 0; x < 8; x++)
|
||||
*crc = (uint16_t)((*crc & 0x8000) ? ((uint16_t)(*crc << 1) ^ 0x1021) : (*crc << 1));
|
||||
}
|
||||
}
|
||||
|
||||
#endif // EEPROM_SETTINGS
|
||||
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
|
||||
char conv[8] = { 0 };
|
||||
|
||||
@ -25,6 +25,10 @@
|
||||
|
||||
void safe_delay(millis_t ms);
|
||||
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
void crc16(uint16_t *crc, const void * const data, uint16_t cnt);
|
||||
#endif
|
||||
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
|
||||
// Convert unsigned int to string with 12 format
|
||||
|
||||
Loading…
Reference in New Issue
Block a user