3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-23 02:35:31 +00:00
Code Issues Releases Wiki Activity

Use US spelling of 'behavior'

Browse Source
This commit is contained in:
Scott Lahteine 2019-05-15 01:49:17 -05:00
parent 7f1e0c5670
commit 785c01f2bc
82 changed files with 237 additions and 237 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Marlin/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2266,7 +2266,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2326,7 +2326,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

2
Marlin/src/feature/bltouch.cpp
View File

@ -114,7 +114,7 @@ bool BLTouch::stow_proc() {
// At the moment that we come in here, we might (pulse) or will (SW mode) see the trigger on the pin. // At the moment that we come in here, we might (pulse) or will (SW mode) see the trigger on the pin.
// So even though we know a STOW will be ignored if an ALARM condition is active, we will STOW. // So even though we know a STOW will be ignored if an ALARM condition is active, we will STOW.
// Note: If the probe is deployed AND in an ALARM condition, this STOW will not pull up the pin // Note: If the probe is deployed AND in an ALARM condition, this STOW will not pull up the pin
// and the ALARM condition will still be there. --> ANTClabs should change this behaviour maybe // and the ALARM condition will still be there. --> ANTClabs should change this behavior maybe
// Attempt to STOW, wait for STOW_DELAY or ALARM // Attempt to STOW, wait for STOW_DELAY or ALARM
if (_stow_query_alarm()) { if (_stow_query_alarm()) {

4
Marlin/src/gcode/bedlevel/G26.cpp
View File

@ -87,7 +87,7 @@
* D Disable Disable the Unified Bed Leveling System. In the normal case the user is invoking this * D Disable Disable the Unified Bed Leveling System. In the normal case the user is invoking this
* command to see how well a Mesh as been adjusted to match a print surface. In order to do * command to see how well a Mesh as been adjusted to match a print surface. In order to do
* this the Unified Bed Leveling System is turned on by the G26 command. The D parameter * this the Unified Bed Leveling System is turned on by the G26 command. The D parameter
* alters the command's normal behaviour and disables the Unified Bed Leveling System even if * alters the command's normal behavior and disables the Unified Bed Leveling System even if
* it is on. * it is on.
* *
* H # Hotend Set the Nozzle Temperature. If not specified, a default of 205 C. will be assumed. * H # Hotend Set the Nozzle Temperature. If not specified, a default of 205 C. will be assumed.
@ -131,7 +131,7 @@
* U # Random Randomize the order that the circles are drawn on the bed. The search for the closest * U # Random Randomize the order that the circles are drawn on the bed. The search for the closest
* un-drawn circle is still done. But the distance to the location for each circle has a * un-drawn circle is still done. But the distance to the location for each circle has a
* random number of the specified size added to it. Specifying S50 will give an interesting * random number of the specified size added to it. Specifying S50 will give an interesting
* deviation from the normal behaviour on a 10 x 10 Mesh. * deviation from the normal behavior on a 10 x 10 Mesh.
* *
* X # X Coord. Specify the starting location of the drawing activity. * X # X Coord. Specify the starting location of the drawing activity.
* *

2
Marlin/src/gcode/config/M301.cpp
View File

@ -42,7 +42,7 @@
void GcodeSuite::M301() { void GcodeSuite::M301() {
// multi-extruder PID patch: M301 updates or prints a single extruder's PID values // multi-extruder PID patch: M301 updates or prints a single extruder's PID values
// default behaviour (omitting E parameter) is to update for extruder 0 only // default behavior (omitting E parameter) is to update for extruder 0 only
const uint8_t e = parser.byteval('E'); // extruder being updated const uint8_t e = parser.byteval('E'); // extruder being updated
if (e < HOTENDS) { // catch bad input value if (e < HOTENDS) { // catch bad input value

2
Marlin/src/gcode/control/M999.cpp
View File

@ -29,7 +29,7 @@
/** /**
* M999: Restart after being stopped * M999: Restart after being stopped
* *
* Default behaviour is to flush the serial buffer and request * Default behavior is to flush the serial buffer and request
* a resend to the host starting on the last N line received. * a resend to the host starting on the last N line received.
* *
* Sending "M999 S1" will resume printing without flushing the * Sending "M999 S1" will resume printing without flushing the

2
Marlin/src/module/thermistor/thermistor_20.h
View File

@ -22,7 +22,7 @@
// PT100 with INA826 amp on Ultimaker v2.0 electronics // PT100 with INA826 amp on Ultimaker v2.0 electronics
// The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature. // The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature.
// This does not match the normal thermistor behaviour so we need to set the following defines // This does not match the normal thermistor behavior so we need to set the following defines
#if THERMISTOR_HEATER_0 == 20 #if THERMISTOR_HEATER_0 == 20
#define HEATER_0_RAW_HI_TEMP 16383 #define HEATER_0_RAW_HI_TEMP 16383
#define HEATER_0_RAW_LO_TEMP 0 #define HEATER_0_RAW_LO_TEMP 0

6
config/default/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2270,7 +2270,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2330,7 +2330,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/AlephObjects/TAZ4/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2270,7 +2270,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2330,7 +2330,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Anet/A2/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Anet/A2plus/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Anet/A6/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Anet/A8/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Anet/A8plus/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2266,7 +2266,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2326,7 +2326,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Anet/E16/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/AnyCubic/i3/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/ArmEd/Configuration_adv.h
View File

@ -320,7 +320,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2272,7 +2272,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2332,7 +2332,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/BIBO/TouchX/default/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/BQ/Hephestos/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2265,7 +2265,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2325,7 +2325,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/BQ/Hephestos_2/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2273,7 +2273,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2333,7 +2333,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/BQ/WITBOX/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2265,7 +2265,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2325,7 +2325,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Cartesio/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Creality/CR-10/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2271,7 +2271,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2331,7 +2331,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Creality/CR-10S/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Creality/CR-10_5S/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Creality/CR-10mini/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Creality/CR-8/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Creality/Ender-2/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2265,7 +2265,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2325,7 +2325,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Creality/Ender-3/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2265,7 +2265,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2325,7 +2325,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Creality/Ender-4/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Einstart-S/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Felix/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/FlashForge/CreatorPro/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2264,7 +2264,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2324,7 +2324,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/FolgerTech/i3-2020/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2336,7 +2336,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Formbot/Raptor/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2272,7 +2272,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2332,7 +2332,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Formbot/T_Rex_2+/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2272,7 +2272,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2342,7 +2342,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Formbot/T_Rex_3/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2267,7 +2267,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2337,7 +2337,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Geeetech/A10M/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Geeetech/A20M/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Geeetech/MeCreator2/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2252,7 +2252,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2312,7 +2312,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Infitary/i3-M508/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/JGAurora/A5/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2265,7 +2265,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2325,7 +2325,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/MakerParts/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Malyan/M150/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Malyan/M200/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Micromake/C1/enhanced/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Mks/Robin/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Mks/Sbase/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2269,7 +2269,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2329,7 +2329,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/RapideLite/RL200/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/RigidBot/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/SCARA/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2265,7 +2265,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2325,7 +2325,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2263,7 +2263,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2323,7 +2323,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Sanguinololu/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/TheBorg/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/TinyBoy2/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Tronxy/X3A/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Tronxy/X5S-2E/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/UltiMachine/Archim1/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/UltiMachine/Archim2/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/VORONDesign/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Velleman/K8200/Configuration_adv.h
View File

@ -329,7 +329,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2281,7 +2281,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2341,7 +2341,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Velleman/K8400/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/WASP/PowerWASP/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/Wanhao/Duplicator 6/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2267,7 +2267,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2327,7 +2327,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/delta/Anycubic/Kossel/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2267,7 +2267,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2327,7 +2327,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2267,7 +2267,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2327,7 +2327,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/delta/FLSUN/kossel/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2267,7 +2267,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2327,7 +2327,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2267,7 +2267,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2327,7 +2327,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2267,7 +2267,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2327,7 +2327,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/delta/MKS/SBASE/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2267,7 +2267,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2327,7 +2327,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/delta/Tevo Little Monster/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2255,7 +2255,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2315,7 +2315,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/delta/generic/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2267,7 +2267,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2327,7 +2327,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/delta/kossel_mini/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2266,7 +2266,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2326,7 +2326,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/delta/kossel_xl/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2267,7 +2267,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2327,7 +2327,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/gCreate/gMax1.5+/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/makibox/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/tvrrug/Round2/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2268,7 +2268,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2328,7 +2328,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**

6
config/examples/wt150/Configuration_adv.h
View File

@ -316,7 +316,7 @@
* If left undefined this defaults to F = F_CPU/(2*255*1) * If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
* *
* USE_OCR2A_AS_TOP [undefined by default] * USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
@ -2269,7 +2269,7 @@
//#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
// axis after which the printer will abort. Comment out to // axis after which the printer will abort. Comment out to
// disable abort behaviour. // disable abort behavior.
#define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
// for this amount of time (in ms) before the encoder // for this amount of time (in ms) before the encoder
@ -2329,7 +2329,7 @@
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only. // Default behavior is limited to Z axis only.
#endif #endif
/** /**