diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration.h b/Marlin/example_configurations/Creality/CR-10S/Configuration.h
index 39eb07e7a5c..a33812fd128 100644
--- a/Marlin/example_configurations/Creality/CR-10S/Configuration.h
+++ b/Marlin/example_configurations/Creality/CR-10S/Configuration.h
@@ -93,7 +93,7 @@
//#define SHOW_CUSTOM_BOOTSCREEN
// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
-//#define CUSTOM_STATUS_SCREEN_IMAGE
+#define CUSTOM_STATUS_SCREEN_IMAGE
// @section machine
@@ -428,7 +428,7 @@
// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH.
// Note that for Bowden Extruders a too-small value here may prevent loading.
#define PREVENT_LENGTHY_EXTRUDE
-#define EXTRUDE_MAXLENGTH 200
+#define EXTRUDE_MAXLENGTH 435
//===========================================================================
//======================== Thermal Runaway Protection =======================
diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
index b06796b95eb..32d97fd8e8b 100644
--- a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
@@ -388,7 +388,7 @@
// @section lcd
#if ENABLED(ULTIPANEL)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+ #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 1*60} // Feedrates (mm/m) for manual moves along X, Y, Z, E from panel
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif
@@ -887,25 +887,25 @@
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
#define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract.
// This short retract is done immediately, before parking the nozzle.
- #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
- #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
+ #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 41 // (mm/s) Unload filament feedrate. This can be pretty fast.
+ #define FILAMENT_CHANGE_UNLOAD_LENGTH 430 // (mm) The length of filament for a complete unload.
// For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle.
// Set to 0 for manual unloading.
- #define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
- #define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
+ #define FILAMENT_CHANGE_LOAD_FEEDRATE 41 // (mm/s) Load filament feedrate. This can be pretty fast.
+ #define FILAMENT_CHANGE_LOAD_LENGTH 430 // (mm) Load length of filament, from extruder gear to nozzle.
// For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle.
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
- #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
+ #define ADVANCED_PAUSE_EXTRUDE_LENGTH 20 // (mm) Length to extrude after loading.
// Set to 0 for manual extrusion.
// Filament can be extruded repeatedly from the Filament Change menu
// until extrusion is consistent, and to purge old filament.
// Filament Unload does a Retract, Delay, and Purge first:
- #define FILAMENT_UNLOAD_RETRACT_LENGTH 2 // (mm) Unload initial retract length.
+ #define FILAMENT_UNLOAD_RETRACT_LENGTH 4 // (mm) Unload initial retract length.
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
- #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
+ #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged.
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
#define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed.
diff --git a/Marlin/example_configurations/Creality/CR-10S/_Statusscreen.h b/Marlin/example_configurations/Creality/CR-10S/_Statusscreen.h
new file mode 100644
index 00000000000..c785ca632b8
--- /dev/null
+++ b/Marlin/example_configurations/Creality/CR-10S/_Statusscreen.h
@@ -0,0 +1,112 @@
+#ifndef _STATUSSCREEN_H_
+#define _STATUSSCREEN_H_
+
+#define STATUS_SCREENWIDTH 128 // Width in pixels
+
+#define STATUS_SCREEN_X 0
+#define STATUS_SCREEN_HOTEND_TEXT_X(E) (38 + (E) * 20)
+#define STATUS_SCREEN_FAN_TEXT_X 103
+
+#include "MarlinConfig.h"
+
+#if HOTENDS < 2
+
+ const unsigned char status_screen0_bmp[] PROGMEM = {
+ //-----"CR-10S 300"-----|-nozzle--|---------|-----bed------|----|-----fan------|
+ 0x3D,0xF0,0x02,0x38,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
+ 0x44,0x88,0x06,0x45,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+ 0x80,0x88,0x02,0x45,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x87,0x30,
+ 0x80,0xF0,0x02,0x44,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x27,0x87,0x90,
+ 0x80,0xA3,0xF2,0x44,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
+ 0x80,0x90,0x02,0x44,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
+ 0x80,0x90,0x02,0x44,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x03,0xD0,
+ 0x44,0x88,0x02,0x45,0x10,0x1F,0xE0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
+ 0x39,0xCC,0x07,0x39,0xE0,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
+ 0x00,0x00,0x00,0x00,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
+ 0x00,0x38,0x70,0xE0,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
+ 0x00,0x44,0x89,0x10,0x00,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2F,0x03,0xD0,
+ 0x00,0x04,0x89,0x10,0x00,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
+ 0x00,0x18,0x89,0x10,0x00,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
+ 0x00,0x04,0x89,0x10,0x00,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x27,0x87,0x90,
+ 0x00,0x04,0x89,0x10,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x33,0x87,0x30,
+ 0x00,0x04,0x89,0x10,0x00,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+ 0x00,0x44,0x89,0x10,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
+ 0x00,0x38,0x70,0xE0,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
+ };
+ const unsigned char status_screen1_bmp[] PROGMEM = {
+ //-----"CR-10S 300"-----|-nozzle--|---------|-----bed------|----|-----fan------|
+ 0x3D,0xF0,0x02,0x38,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
+ 0x44,0x88,0x06,0x45,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+ 0x80,0x88,0x02,0x45,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFC,0x30,
+ 0x80,0xF0,0x02,0x44,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0xFC,0x10,
+ 0x80,0xA3,0xF2,0x44,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x78,0x10,
+ 0x80,0x90,0x02,0x44,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x10,
+ 0x80,0x90,0x02,0x44,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2C,0x00,0xD0,
+ 0x44,0x88,0x02,0x45,0x10,0x1F,0xE0,0x00,0x00,0x08,0x20,0x80,0x00,0x2E,0x31,0xD0,
+ 0x39,0xCC,0x07,0x39,0xE0,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x2F,0x7B,0xD0,
+ 0x00,0x00,0x00,0x00,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x2F,0x7B,0xD0,
+ 0x00,0x38,0x70,0xE0,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2E,0x31,0xD0,
+ 0x00,0x44,0x89,0x10,0x00,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2C,0x00,0xD0,
+ 0x00,0x04,0x89,0x10,0x00,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x20,0x30,0x10,
+ 0x00,0x18,0x89,0x10,0x00,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x20,0x78,0x10,
+ 0x00,0x04,0x89,0x10,0x00,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x20,0xFC,0x10,
+ 0x00,0x04,0x89,0x10,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x30,0xFC,0x30,
+ 0x00,0x04,0x89,0x10,0x00,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+ 0x00,0x44,0x89,0x10,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
+ 0x00,0x38,0x70,0xE0,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
+ };
+
+ #define STATUS_SCREEN_BED_TEXT_X 73
+
+#else // HOTENDS >= 2
+
+ const unsigned char status_screen0_bmp[] PROGMEM = {
+ //-----"CR-10S 300"------|nozzle|----|nozzle|----|-----bed-----|------fan------|
+ 0x3D,0xF0,0x02,0x38,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
+ 0x44,0x88,0x06,0x45,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+ 0x80,0x88,0x02,0x45,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x87,0x30,
+ 0x80,0xF0,0x02,0x44,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x27,0x87,0x90,
+ 0x80,0xA3,0xF2,0x44,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
+ 0x80,0x90,0x02,0x44,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
+ 0x80,0x90,0x02,0x44,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x03,0xD0,
+ 0x44,0x88,0x02,0x45,0x10,0x1F,0xE0,0x01,0xFE,0x00,0x08,0x20,0x80,0x20,0x30,0x10,
+ 0x39,0xCC,0x07,0x39,0xE0,0x3F,0xF0,0x03,0xFF,0x00,0x04,0x10,0x40,0x20,0x78,0x10,
+ 0x00,0x00,0x00,0x00,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x04,0x10,0x40,0x20,0x78,0x10,
+ 0x00,0x38,0x70,0xE0,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x08,0x20,0x80,0x20,0x30,0x10,
+ 0x00,0x44,0x89,0x10,0x00,0x1F,0xE0,0x01,0xFE,0x00,0x10,0x41,0x00,0x2F,0x03,0xD0,
+ 0x00,0x04,0x89,0x10,0x00,0x1F,0xE0,0x01,0xFE,0x00,0x20,0x82,0x00,0x2F,0x87,0xD0,
+ 0x00,0x18,0x89,0x10,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x20,0x82,0x00,0x2F,0x87,0xD0,
+ 0x00,0x04,0x89,0x10,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x10,0x41,0x00,0x27,0x87,0x90,
+ 0x00,0x04,0x89,0x10,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x08,0x20,0x80,0x33,0x87,0x30,
+ 0x00,0x04,0x89,0x10,0x00,0x0F,0xC0,0x00,0xFC,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+ 0x00,0x44,0x89,0x10,0x00,0x07,0x80,0x00,0x78,0x00,0xFF,0xFF,0xC0,0x3F,0xFF,0xF0,
+ 0x00,0x38,0x70,0xE0,0x00,0x03,0x00,0x00,0x30,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00
+ };
+ const unsigned char status_screen1_bmp[] PROGMEM = {
+ //-----"CR-10S 300"------|nozzle|----|nozzle|----|-----bed-----|------fan------|
+ 0x3D,0xF0,0x02,0x38,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
+ 0x44,0x88,0x06,0x45,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+ 0x80,0x88,0x02,0x45,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFC,0x30,
+ 0x80,0xF0,0x02,0x44,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0xFC,0x10,
+ 0x80,0xA3,0xF2,0x44,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x78,0x10,
+ 0x80,0x90,0x02,0x44,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x10,
+ 0x80,0x90,0x02,0x44,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2C,0x00,0xD0,
+ 0x44,0x88,0x02,0x45,0x10,0x1F,0xE0,0x01,0xFE,0x00,0x08,0x20,0x80,0x2E,0x31,0xD0,
+ 0x39,0xCC,0x07,0x39,0xE0,0x3F,0xF0,0x03,0xFF,0x00,0x04,0x10,0x40,0x2F,0x7B,0xD0,
+ 0x00,0x00,0x00,0x00,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x04,0x10,0x40,0x2F,0x7B,0xD0,
+ 0x00,0x38,0x70,0xE0,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x08,0x20,0x80,0x2E,0x31,0xD0,
+ 0x00,0x44,0x89,0x10,0x00,0x1F,0xE0,0x01,0xFE,0x00,0x10,0x41,0x00,0x2C,0x00,0xD0,
+ 0x00,0x04,0x89,0x10,0x00,0x1F,0xE0,0x01,0xFE,0x00,0x20,0x82,0x00,0x20,0x30,0x10,
+ 0x00,0x18,0x89,0x10,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x20,0x82,0x00,0x20,0x78,0x10,
+ 0x00,0x04,0x89,0x10,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x10,0x41,0x00,0x20,0xFC,0x10,
+ 0x00,0x04,0x89,0x10,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x08,0x20,0x80,0x30,0xFC,0x30,
+ 0x00,0x04,0x89,0x10,0x00,0x0F,0xC0,0x00,0xFC,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+ 0x00,0x44,0x89,0x10,0x00,0x07,0x80,0x00,0x78,0x00,0xFF,0xFF,0xC0,0x3F,0xFF,0xF0,
+ 0x00,0x38,0x70,0xE0,0x00,0x03,0x00,0x00,0x30,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00
+ };
+
+ #define STATUS_SCREEN_BED_TEXT_X 81
+
+#endif // HOTENDS >= 2
+
+#endif // _STATUSSCREEN_H_
diff --git a/Marlin/example_configurations/Creality/Ender/_Statusscreen.h b/Marlin/example_configurations/Creality/Ender/_Statusscreen.h
index a5c769d62d0..692cc7ceb4c 100644
--- a/Marlin/example_configurations/Creality/Ender/_Statusscreen.h
+++ b/Marlin/example_configurations/Creality/Ender/_Statusscreen.h
@@ -1,54 +1,112 @@
-#ifndef STATUSSCREEN_H_
-#define STATUSSCREEN_H_
+#ifndef _STATUSSCREEN_H_
+#define _STATUSSCREEN_H_
#define STATUS_SCREENWIDTH 128 // Width in pixels
-const unsigned char status_screen0_bmp[] PROGMEM = {
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x87,0x30,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x27,0x87,0x90,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
- 0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x03,0xD0,
- 0xFE,0x00,0x02,0x00,0x00,0x1F,0xE0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
- 0x42,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
- 0x48,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
- 0x48,0xDC,0x3E,0x3C,0xEE,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
- 0x78,0x62,0x42,0x42,0x32,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2F,0x03,0xD0,
- 0x48,0x42,0x42,0x42,0x20,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
- 0x48,0x42,0x42,0x7E,0x20,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
- 0x40,0x42,0x42,0x40,0x20,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x27,0x87,0x90,
- 0x42,0x42,0x46,0x42,0x20,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x33,0x87,0x30,
- 0xFE,0xE7,0x3B,0x3C,0xF8,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
- 0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
- 0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
-};
-const unsigned char status_screen1_bmp[] PROGMEM = {
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFC,0x30,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0xFC,0x10,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x78,0x10,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x10,
- 0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2C,0x00,0xD0,
- 0xFE,0x00,0x02,0x00,0x00,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
- 0x42,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
- 0x48,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
- 0x48,0xDC,0x3E,0x3C,0xEE,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
- 0x78,0x62,0x42,0x42,0x32,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2C,0x00,0xD0,
- 0x48,0x42,0x42,0x42,0x20,0x1F,0xE0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x30,0x10,
- 0x48,0x42,0x42,0x7E,0x20,0x3F,0xF0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x78,0x10,
- 0x40,0x42,0x42,0x40,0x20,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x20,0xFC,0x10,
- 0x42,0x42,0x46,0x42,0x20,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x30,0xFC,0x30,
- 0xFE,0xE7,0x3B,0x3C,0xF8,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
- 0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
- 0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
-};
-
#define STATUS_SCREEN_X 0
-#define STATUS_SCREEN_HOTEND_TEXT_X(i) (39 + (i) * 25)
-#define STATUS_SCREEN_BED_TEXT_X 72
+#define STATUS_SCREEN_HOTEND_TEXT_X(E) (38 + (E) * 20)
#define STATUS_SCREEN_FAN_TEXT_X 103
-#endif // STATUSSCREEN_H_
+#include "MarlinConfig.h"
+
+#if HOTENDS < 2
+
+ const unsigned char status_screen0_bmp[] PROGMEM = {
+ //-------"ender"--------|-nozzle--|---------|-----bed------|----|-----fan------|
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x87,0x30,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x27,0x87,0x90,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
+ 0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x03,0xD0,
+ 0xFE,0x00,0x02,0x00,0x00,0x1F,0xE0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
+ 0x42,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
+ 0x48,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
+ 0x48,0xDC,0x3E,0x3C,0xEE,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
+ 0x78,0x62,0x42,0x42,0x32,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2F,0x03,0xD0,
+ 0x48,0x42,0x42,0x42,0x20,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
+ 0x48,0x42,0x42,0x7E,0x20,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
+ 0x40,0x42,0x42,0x40,0x20,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x27,0x87,0x90,
+ 0x42,0x42,0x46,0x42,0x20,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x33,0x87,0x30,
+ 0xFE,0xE7,0x3B,0x3C,0xF8,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+ 0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
+ 0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
+ };
+ const unsigned char status_screen1_bmp[] PROGMEM = {
+ //-------"ender"--------|-nozzle--|---------|-----bed------|----|-----fan------|
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFC,0x30,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0xFC,0x10,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x78,0x10,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x10,
+ 0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2C,0x00,0xD0,
+ 0xFE,0x00,0x02,0x00,0x00,0x1F,0xE0,0x00,0x00,0x08,0x20,0x80,0x00,0x2E,0x31,0xD0,
+ 0x42,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x2F,0x7B,0xD0,
+ 0x48,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x2F,0x7B,0xD0,
+ 0x48,0xDC,0x3E,0x3C,0xEE,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2E,0x31,0xD0,
+ 0x78,0x62,0x42,0x42,0x32,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2C,0x00,0xD0,
+ 0x48,0x42,0x42,0x42,0x20,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x20,0x30,0x10,
+ 0x48,0x42,0x42,0x7E,0x20,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x20,0x78,0x10,
+ 0x40,0x42,0x42,0x40,0x20,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x20,0xFC,0x10,
+ 0x42,0x42,0x46,0x42,0x20,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x30,0xFC,0x30,
+ 0xFE,0xE7,0x3B,0x3C,0xF8,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+ 0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
+ 0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
+ };
+
+ #define STATUS_SCREEN_BED_TEXT_X 73
+
+#else // HOTENDS >= 2
+
+ const unsigned char status_screen0_bmp[] PROGMEM = {
+ //-------"ender"---------|nozzle|----|nozzle|----|-----bed-----|------fan------|
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x87,0x30,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x27,0x87,0x90,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
+ 0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x03,0xD0,
+ 0xFE,0x00,0x02,0x00,0x00,0x1F,0xE0,0x01,0xFE,0x00,0x08,0x20,0x80,0x20,0x30,0x10,
+ 0x42,0x00,0x02,0x00,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x04,0x10,0x40,0x20,0x78,0x10,
+ 0x48,0x00,0x02,0x00,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x04,0x10,0x40,0x20,0x78,0x10,
+ 0x48,0xDC,0x3E,0x3C,0xEE,0x3F,0xF0,0x03,0xFF,0x00,0x08,0x20,0x80,0x20,0x30,0x10,
+ 0x78,0x62,0x42,0x42,0x32,0x1F,0xE0,0x01,0xFE,0x00,0x10,0x41,0x00,0x2F,0x03,0xD0,
+ 0x48,0x42,0x42,0x42,0x20,0x1F,0xE0,0x01,0xFE,0x00,0x20,0x82,0x00,0x2F,0x87,0xD0,
+ 0x48,0x42,0x42,0x7E,0x20,0x3F,0xF0,0x03,0xFF,0x00,0x20,0x82,0x00,0x2F,0x87,0xD0,
+ 0x40,0x42,0x42,0x40,0x20,0x3F,0xF0,0x03,0xFF,0x00,0x10,0x41,0x00,0x27,0x87,0x90,
+ 0x42,0x42,0x46,0x42,0x20,0x3F,0xF0,0x03,0xFF,0x00,0x08,0x20,0x80,0x33,0x87,0x30,
+ 0xFE,0xE7,0x3B,0x3C,0xF8,0x0F,0xC0,0x00,0xFC,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+ 0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x78,0x00,0xFF,0xFF,0xC0,0x3F,0xFF,0xF0,
+ 0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x30,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00
+ };
+ const unsigned char status_screen1_bmp[] PROGMEM = {
+ //-------"ender"---------|nozzle|----|nozzle|----|-----bed-----|------fan------|
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFC,0x30,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0xFC,0x10,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x78,0x10,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x10,
+ 0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2C,0x00,0xD0,
+ 0xFE,0x00,0x02,0x00,0x00,0x1F,0xE0,0x01,0xFE,0x00,0x08,0x20,0x80,0x2E,0x31,0xD0,
+ 0x42,0x00,0x02,0x00,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x04,0x10,0x40,0x2F,0x7B,0xD0,
+ 0x48,0x00,0x02,0x00,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x04,0x10,0x40,0x2F,0x7B,0xD0,
+ 0x48,0xDC,0x3E,0x3C,0xEE,0x3F,0xF0,0x03,0xFF,0x00,0x08,0x20,0x80,0x2E,0x31,0xD0,
+ 0x78,0x62,0x42,0x42,0x32,0x1F,0xE0,0x01,0xFE,0x00,0x10,0x41,0x00,0x2C,0x00,0xD0,
+ 0x48,0x42,0x42,0x42,0x20,0x1F,0xE0,0x01,0xFE,0x00,0x20,0x82,0x00,0x20,0x30,0x10,
+ 0x48,0x42,0x42,0x7E,0x20,0x3F,0xF0,0x03,0xFF,0x00,0x20,0x82,0x00,0x20,0x78,0x10,
+ 0x40,0x42,0x42,0x40,0x20,0x3F,0xF0,0x03,0xFF,0x00,0x10,0x41,0x00,0x20,0xFC,0x10,
+ 0x42,0x42,0x46,0x42,0x20,0x3F,0xF0,0x03,0xFF,0x00,0x08,0x20,0x80,0x30,0xFC,0x30,
+ 0xFE,0xE7,0x3B,0x3C,0xF8,0x0F,0xC0,0x00,0xFC,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+ 0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x78,0x00,0xFF,0xFF,0xC0,0x3F,0xFF,0xF0,
+ 0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x30,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00
+ };
+
+ #define STATUS_SCREEN_BED_TEXT_X 81
+
+#endif // HOTENDS >= 2
+
+#endif // _STATUSSCREEN_H_
diff --git a/Marlin/ultralcd_impl_DOGM.h b/Marlin/ultralcd_impl_DOGM.h
index ee018c323a3..1b336a0019e 100644
--- a/Marlin/ultralcd_impl_DOGM.h
+++ b/Marlin/ultralcd_impl_DOGM.h
@@ -386,6 +386,10 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t x, const
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
}
+#ifndef HEAT_INDICATOR_X
+ #define HEAT_INDICATOR_X 8
+#endif
+
FORCE_INLINE void _draw_heater_status(const uint8_t x, const int8_t heater, const bool blink) {
#if !HEATER_IDLE_HANDLER
UNUSED(blink);
@@ -415,7 +419,7 @@ FORCE_INLINE void _draw_heater_status(const uint8_t x, const int8_t heater, cons
_draw_centered_temp((isBed ? thermalManager.degBed() : thermalManager.degHotend(heater)) + 0.5, x, 28);
if (PAGE_CONTAINS(17, 20)) {
- const uint8_t h = isBed ? 7 : 8,
+ const uint8_t h = isBed ? 7 : HEAT_INDICATOR_X,
y = isBed ? 18 : 17;
if (isBed ? thermalManager.isHeatingBed() : thermalManager.isHeatingHotend(heater)) {
u8g.setColorIndex(0); // white on black