From 7dae720de5c4fdea5fab657c09a2c8ba66f5a054 Mon Sep 17 00:00:00 2001 From: GatCode Date: Sat, 12 Mar 2022 00:56:31 +0100 Subject: [PATCH] =?UTF-8?q?=F0=9F=93=8C=20Fix,=20extend=20Index=20Rev03=20?= =?UTF-8?q?Mobo=20(#23851)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Co-authored-by: Scott Lahteine --- Marlin/src/inc/SanityCheck.h | 4 +- Marlin/src/pins/stm32f4/pins_INDEX_REV03.h | 94 ++++++++++++++++------ 2 files changed, 71 insertions(+), 27 deletions(-) diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 83d37f22df..a94846275e 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -2183,9 +2183,9 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS * Test Sensor & Heater pin combos. * Pins and Sensor IDs must be set for each heater */ -#if !ANY_PIN(TEMP_0, TEMP_0_CS) +#if HAS_EXTRUDERS && !ANY_PIN(TEMP_0, TEMP_0_CS) #error "TEMP_0_PIN or TEMP_0_CS_PIN not defined for this board." -#elif !HAS_HEATER_0 && EXTRUDERS +#elif HAS_EXTRUDERS && !HAS_HEATER_0 #error "HEATER_0_PIN not defined for this board." #elif TEMP_SENSOR_0_IS_MAX_TC && !PIN_EXISTS(TEMP_0_CS) #error "TEMP_SENSOR_0 MAX thermocouple requires TEMP_0_CS_PIN." diff --git a/Marlin/src/pins/stm32f4/pins_INDEX_REV03.h b/Marlin/src/pins/stm32f4/pins_INDEX_REV03.h index a9828c5bda..977f476343 100644 --- a/Marlin/src/pins/stm32f4/pins_INDEX_REV03.h +++ b/Marlin/src/pins/stm32f4/pins_INDEX_REV03.h @@ -60,12 +60,12 @@ // None of these require limit switches by default, so we leave these commented // here for your reference. -// #define I_MIN_PIN PA8 -// #define I_MAX_PIN PA8 -// #define J_MIN_PIN PD13 -// #define J_MAX_PIN PD13 -// #define K_MIN_PIN PC9 -// #define K_MAX_PIN PC9 +//#define I_MIN_PIN PA8 +//#define I_MAX_PIN PA8 +//#define J_MIN_PIN PD13 +//#define J_MAX_PIN PD13 +//#define K_MIN_PIN PC9 +//#define K_MAX_PIN PC9 // // Steppers @@ -73,47 +73,81 @@ #define X_STEP_PIN PB15 #define X_DIR_PIN PB14 #define X_ENABLE_PIN PD9 -#define X_SERIAL_TX_PIN PD8 -#define X_SERIAL_RX_PIN PD8 #define Y_STEP_PIN PE15 #define Y_DIR_PIN PE14 #define Y_ENABLE_PIN PB13 -#define Y_SERIAL_TX_PIN PB12 -#define Y_SERIAL_RX_PIN PB12 #define Z_STEP_PIN PE7 #define Z_DIR_PIN PB1 #define Z_ENABLE_PIN PE9 -#define Z_SERIAL_TX_PIN PE8 -#define Z_SERIAL_RX_PIN PE8 #define I_STEP_PIN PC4 #define I_DIR_PIN PA4 #define I_ENABLE_PIN PB0 -#define I_SERIAL_TX_PIN PC5 -#define I_SERIAL_RX_PIN PC5 #define J_STEP_PIN PE11 #define J_DIR_PIN PE10 #define J_ENABLE_PIN PE13 -#define J_SERIAL_TX_PIN PE12 -#define J_SERIAL_RX_PIN PE12 -#define K_SERIAL_TX_PIN PA2 -#define K_SERIAL_RX_PIN PA2 #define K_STEP_PIN PD6 #define K_DIR_PIN PD7 #define K_ENABLE_PIN PA3 -// Reduce baud rate to improve software serial reliability -#define TMC_BAUD_RATE 19200 +#if HAS_TMC_SPI + /** + * Make sure to configure the jumpers on the back side of the Mobo according to + * this diagram: https://github.com/MarlinFirmware/Marlin/pull/23851 + */ + #error "SPI drivers require a custom jumper configuration, see comment above! Comment out this line to continue." -// Not required for this board. Fails to compile otherwise. -// PD0 is not connected on this board. -#define TEMP_0_PIN PD0 + #if AXIS_HAS_SPI(X) + #define X_CS_PIN PD8 + #endif + #if AXIS_HAS_SPI(Y) + #define Y_CS_PIN PB12 + #endif + #if AXIS_HAS_SPI(Z) + #define Z_CS_PIN PE8 + #endif + #if AXIS_HAS_SPI(I) + #define I_CS_PIN PC5 + #endif + #if AXIS_HAS_SPI(J) + #define J_CS_PIN PE12 + #endif + #if AXIS_HAS_SPI(K) + #define K_CS_PIN PA2 + #endif -// General use mosfets, useful for things like pumps and solenoids +#elif HAS_TMC_UART + + #define X_SERIAL_TX_PIN PD8 + #define X_SERIAL_RX_PIN X_SERIAL_TX_PIN + + #define Y_SERIAL_TX_PIN PB12 + #define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN + + #define Z_SERIAL_TX_PIN PE8 + #define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN + + #define I_SERIAL_TX_PIN PC5 + #define I_SERIAL_RX_PIN I_SERIAL_TX_PIN + + #define J_SERIAL_TX_PIN PE12 + #define J_SERIAL_RX_PIN J_SERIAL_TX_PIN + + #define K_SERIAL_TX_PIN PA2 + #define K_SERIAL_RX_PIN K_SERIAL_TX_PIN + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 + +#endif + +// +// Heaters / Fans +// #define FAN_PIN PE2 #define FAN1_PIN PE3 #define FAN2_PIN PE4 @@ -121,16 +155,26 @@ #define FAN_SOFT_PWM_REQUIRED -// Neopixel Rings +// +// Neopixel +// #define NEOPIXEL_PIN PC7 #define NEOPIXEL2_PIN PC8 +// // SPI +// #define MISO_PIN PB4 #define MOSI_PIN PB5 #define SCK_PIN PB3 +#define TMC_SW_MISO MISO_PIN +#define TMC_SW_MOSI MOSI_PIN +#define TMC_SW_SCK SCK_PIN + +// // I2C +// #define I2C_SDA_PIN PB7 #define I2C_SCL_PIN PB6