diff --git a/Marlin/src/HAL/HAL_ESP32/FlushableHardwareSerial.cpp b/Marlin/src/HAL/HAL_ESP32/FlushableHardwareSerial.cpp index 2d99792d21..6b1277b204 100644 --- a/Marlin/src/HAL/HAL_ESP32/FlushableHardwareSerial.cpp +++ b/Marlin/src/HAL/HAL_ESP32/FlushableHardwareSerial.cpp @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm diff --git a/Marlin/src/HAL/HAL_ESP32/WebSocketSerial.cpp b/Marlin/src/HAL/HAL_ESP32/WebSocketSerial.cpp index 4858ba4c3e..014e9757f6 100644 --- a/Marlin/src/HAL/HAL_ESP32/WebSocketSerial.cpp +++ b/Marlin/src/HAL/HAL_ESP32/WebSocketSerial.cpp @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm diff --git a/Marlin/src/HAL/HAL_ESP32/WebSocketSerial.h b/Marlin/src/HAL/HAL_ESP32/WebSocketSerial.h index 43c8044107..a3296b2807 100644 --- a/Marlin/src/HAL/HAL_ESP32/WebSocketSerial.h +++ b/Marlin/src/HAL/HAL_ESP32/WebSocketSerial.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm diff --git a/Marlin/src/HAL/HAL_ESP32/web.cpp b/Marlin/src/HAL/HAL_ESP32/web.cpp index 6bbc0d13aa..cb06cfc7e4 100644 --- a/Marlin/src/HAL/HAL_ESP32/web.cpp +++ b/Marlin/src/HAL/HAL_ESP32/web.cpp @@ -1,7 +1,9 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,6 +17,7 @@ * * You should have received a copy of the GNU General Public License * along with this program. If not, see . + * */ #ifdef ARDUINO_ARCH_ESP32 diff --git a/Marlin/src/HAL/HAL_ESP32/web.h b/Marlin/src/HAL/HAL_ESP32/web.h index 7f8796e7d4..4173fd91b0 100644 --- a/Marlin/src/HAL/HAL_ESP32/web.h +++ b/Marlin/src/HAL/HAL_ESP32/web.h @@ -1,7 +1,9 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,6 +17,7 @@ * * You should have received a copy of the GNU General Public License * along with this program. If not, see . + * */ #pragma once diff --git a/Marlin/src/HAL/HAL_ESP32/wifi.cpp b/Marlin/src/HAL/HAL_ESP32/wifi.cpp index 7afc7a87a8..9fb5459ae0 100644 --- a/Marlin/src/HAL/HAL_ESP32/wifi.cpp +++ b/Marlin/src/HAL/HAL_ESP32/wifi.cpp @@ -1,7 +1,9 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,6 +17,7 @@ * * You should have received a copy of the GNU General Public License * along with this program. If not, see . + * */ #ifdef ARDUINO_ARCH_ESP32 diff --git a/Marlin/src/HAL/HAL_ESP32/wifi.h b/Marlin/src/HAL/HAL_ESP32/wifi.h index ef35cf14ca..7be40ef900 100644 --- a/Marlin/src/HAL/HAL_ESP32/wifi.h +++ b/Marlin/src/HAL/HAL_ESP32/wifi.h @@ -1,7 +1,9 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,6 +17,7 @@ * * You should have received a copy of the GNU General Public License * along with this program. If not, see . + * */ #pragma once diff --git a/Marlin/src/HAL/HAL_STM32F4/EEPROM_Emul/eeprom_emul.h b/Marlin/src/HAL/HAL_STM32F4/EEPROM_Emul/eeprom_emul.h index a3e93503d8..fe0da6387b 100644 --- a/Marlin/src/HAL/HAL_STM32F4/EEPROM_Emul/eeprom_emul.h +++ b/Marlin/src/HAL/HAL_STM32F4/EEPROM_Emul/eeprom_emul.h @@ -1,50 +1,48 @@ -/** - ****************************************************************************** - * @file EEPROM/EEPROM_Emulation/inc/eeprom.h - * @author MCD Application Team - * @version V1.2.6 - * @date 04-November-2016 - * @brief This file contains all the functions prototypes for the EEPROM - * emulation firmware library. - ****************************************************************************** - * @attention - * - *

© Copyright � 2016 STMicroelectronics International N.V. - * All rights reserved.

- * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted, provided that the following conditions are met: - * - * 1. Redistribution of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of other - * contributors to this software may be used to endorse or promote products - * derived from this software without specific written permission. - * 4. This software, including modifications and/or derivative works of this - * software, must execute solely and exclusively on microcontroller or - * microprocessor devices manufactured by or for STMicroelectronics. - * 5. Redistribution and use of this software other than as permitted under - * this license is void and will automatically terminate your rights under - * this license. - * - * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A - * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY - * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT - * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ +/****************************************************************************** + * @file eeprom_emul.h + * @author MCD Application Team + * @version V1.2.6 + * @date 04-November-2016 + * @brief This file contains all the functions prototypes for the EEPROM + * emulation firmware library. + ****************************************************************************** + * @attention + * + *

© Copyright � 2016 STMicroelectronics International N.V. + * All rights reserved.

+ * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ******************************************************************************/ #pragma once // -------------------------------------------------------------------------- diff --git a/Marlin/src/HAL/HAL_STM32F7/EEPROM_Emul/eeprom_emul.h b/Marlin/src/HAL/HAL_STM32F7/EEPROM_Emul/eeprom_emul.h index 441ff1bae1..8cffdbef77 100644 --- a/Marlin/src/HAL/HAL_STM32F7/EEPROM_Emul/eeprom_emul.h +++ b/Marlin/src/HAL/HAL_STM32F7/EEPROM_Emul/eeprom_emul.h @@ -1,50 +1,48 @@ -/** - ****************************************************************************** - * @file EEPROM/EEPROM_Emulation/inc/eeprom.h - * @author MCD Application Team - * @version V1.2.6 - * @date 04-November-2016 - * @brief This file contains all the functions prototypes for the EEPROM - * emulation firmware library. - ****************************************************************************** - * @attention - * - *

© Copyright © 2016 STMicroelectronics International N.V. - * All rights reserved.

- * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted, provided that the following conditions are met: - * - * 1. Redistribution of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of other - * contributors to this software may be used to endorse or promote products - * derived from this software without specific written permission. - * 4. This software, including modifications and/or derivative works of this - * software, must execute solely and exclusively on microcontroller or - * microprocessor devices manufactured by or for STMicroelectronics. - * 5. Redistribution and use of this software other than as permitted under - * this license is void and will automatically terminate your rights under - * this license. - * - * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A - * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY - * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT - * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ +/****************************************************************************** + * @file eeprom_emul.h + * @author MCD Application Team + * @version V1.2.6 + * @date 04-November-2016 + * @brief This file contains all the functions prototypes for the EEPROM + * emulation firmware library. + ****************************************************************************** + * @attention + * + *

© Copyright © 2016 STMicroelectronics International N.V. + * All rights reserved.

+ * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ #pragma once // -------------------------------------------------------------------------- diff --git a/Marlin/src/feature/host_actions.cpp b/Marlin/src/feature/host_actions.cpp index bad7bb75cf..f15462195e 100644 --- a/Marlin/src/feature/host_actions.cpp +++ b/Marlin/src/feature/host_actions.cpp @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm diff --git a/Marlin/src/feature/host_actions.h b/Marlin/src/feature/host_actions.h index 4aee3ef1f5..e6f77cb63c 100644 --- a/Marlin/src/feature/host_actions.h +++ b/Marlin/src/feature/host_actions.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm diff --git a/Marlin/src/gcode/host/M876.cpp b/Marlin/src/gcode/host/M876.cpp index f0850ce454..7f7d4c8c40 100644 --- a/Marlin/src/gcode/host/M876.cpp +++ b/Marlin/src/gcode/host/M876.cpp @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm diff --git a/Marlin/src/gcode/temperature/M141_M191.cpp b/Marlin/src/gcode/temperature/M141_M191.cpp index 3aeba2bb0a..d65dc7c62f 100644 --- a/Marlin/src/gcode/temperature/M141_M191.cpp +++ b/Marlin/src/gcode/temperature/M141_M191.cpp @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm diff --git a/Marlin/src/lcd/menu/menu_service.cpp b/Marlin/src/lcd/menu/menu_service.cpp index c88ca6992f..05d43f5fd0 100644 --- a/Marlin/src/lcd/menu/menu_service.cpp +++ b/Marlin/src/lcd/menu/menu_service.cpp @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm diff --git a/Marlin/src/libs/bresenham.h b/Marlin/src/libs/bresenham.h index 139c3ba801..0cd8850022 100644 --- a/Marlin/src/libs/bresenham.h +++ b/Marlin/src/libs/bresenham.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm