From 7e7e870eae769af80517afdab3259cd73a734ff5 Mon Sep 17 00:00:00 2001 From: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Thu, 13 Aug 2020 20:03:49 -0500 Subject: [PATCH] Config adjustments --- Marlin/Configuration.h | 2 +- Marlin/Configuration_adv.h | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 986b9efb650..dc0416d516b 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -2359,7 +2359,7 @@ #define NEOPIXEL_PIN 4 // LED driving pin //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL2_INSERIES false // The default behaviour is 'false' with neopixel2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 1c29af1f46c..529dcc3091a 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -825,13 +825,13 @@ //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated -// Minimum time that a segment needs to take as the buffer gets emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. - // Default Minimum Feedrates for printing and travel moves #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. +// Minimum time that a segment needs to take as the buffer gets emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. + // Slow down the machine if the lookahead buffer is (by default) half full. // Increase the slowdown divisor for larger buffer sizes. #define SLOWDOWN