3DPrinting/MarlinFirmware
0
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2025-01-22 17:52:57 +00:00
Code Issues Releases Wiki Activity

🔧 Config adjustments

Browse source
This commit is contained in:
Scott Lahteine 2024-09-05 15:10:23 -05:00
parent d36d9cb506
commit 83cbed8527
2 changed files with 24 additions and 11 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
Marlin/Configuration.h
View file

@ -1679,8 +1679,8 @@
* probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD.
* Only integer values >= 1 are valid here. * Only integer values >= 1 are valid here.
* *
* Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * Example: 'M851 Z-5' with a CLEARANCE of 4 => 9mm from bed to nozzle.
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. * But: 'M851 Z+1' with a CLEARANCE of 2 => 2mm from bed to nozzle.
*/ */
#define Z_CLEARANCE_DEPLOY_PROBE 10 // (mm) Z Clearance for Deploy/Stow #define Z_CLEARANCE_DEPLOY_PROBE 10 // (mm) Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // (mm) Z Clearance between probe points #define Z_CLEARANCE_BETWEEN_PROBES 5 // (mm) Z Clearance between probe points

31
Marlin/Configuration_adv.h
View file

@ -1082,9 +1082,11 @@
#define HOME_AFTER_G34 #define HOME_AFTER_G34
#endif #endif
// /**
// Add the G35 command to read bed corners to help adjust screws. Requires a bed probe. * Assisted Tramming
// *
* Add the G35 command to measure bed corners and help adjust screws. Requires a bed probe.
*/
//#define ASSISTED_TRAMMING //#define ASSISTED_TRAMMING
#if ENABLED(ASSISTED_TRAMMING) #if ENABLED(ASSISTED_TRAMMING)
@ -1117,7 +1119,7 @@
// @section motion control // @section motion control
/** /**
* Fixed-time-based Motion Control -- EXPERIMENTAL * Fixed-time-based Motion Control -- BETA FEATURE
* Enable/disable and set parameters with G-code M493. * Enable/disable and set parameters with G-code M493.
* See ft_types.h for named values used by FTM options. * See ft_types.h for named values used by FTM options.
*/ */
@ -1181,7 +1183,7 @@
#endif #endif
/** /**
* Input Shaping -- EXPERIMENTAL * Input Shaping
* *
* Zero Vibration (ZV) Input Shaping for X and/or Y movements. * Zero Vibration (ZV) Input Shaping for X and/or Y movements.
* *
@ -1490,8 +1492,17 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
/**
* Probe Offset Wizard
* Add a Probe Z Offset calibration option to the LCD menu.
* Use this helper to get a perfect 'M851 Z' probe offset.
* When launched this powerful wizard:
* - Measures the bed height at the configured position with the probe.
* - Moves the nozzle to the same position for a "paper" measurement.
* - The difference is used to set the probe Z offset.
*/
#if HAS_BED_PROBE && ANY(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI) #if HAS_BED_PROBE && ANY(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu //#define PROBE_OFFSET_WIZARD
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(PROBE_OFFSET_WIZARD)
/** /**
* Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
@ -1508,6 +1519,10 @@
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
#if HAS_BED_PROBE #if HAS_BED_PROBE
// Show Deploy / Stow Probe options in the Motion menu.
#define PROBE_DEPLOY_STOW_MENU
// Add calibration in the Probe Offsets menu to compensate for X-axis twist. // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define X_AXIS_TWIST_COMPENSATION //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
@ -1522,8 +1537,6 @@
#define XATC_Z_OFFSETS { 0, 0, 0 } // Z offsets for X axis sample points #define XATC_Z_OFFSETS { 0, 0, 0 } // Z offsets for X axis sample points
#endif #endif
// Show Deploy / Stow Probe options in the Motion menu.
#define PROBE_DEPLOY_STOW_MENU
#endif #endif
// Include a page of printer information in the LCD Main Menu // Include a page of printer information in the LCD Main Menu
@ -2708,7 +2721,7 @@
/** /**
* Set the number of proportional font spaces required to fill up a typical character space. * Set the number of proportional font spaces required to fill up a typical character space.
* This can help to better align the output of commands like `G29 O` Mesh Output. * This can help to better align the output of commands like 'G29 O' Mesh Output.
* *
* For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
* Otherwise, adjust according to your client and font. * Otherwise, adjust according to your client and font.