Style, spacing, typo cleanup for recent changes

2024-11-23 02:35:31 +00:00 · 2020-12-08 20:17:55 -06:00 · 2020-12-08 20:17:55 -06:00 · 885b0d2ec5
commit 885b0d2ec5
parent 66834cf324
13 changed files with 133 additions and 137 deletions
--- a/Marlin/src/HAL/STM32/inc/SanityCheck.h
+++ b/Marlin/src/HAL/STM32/inc/SanityCheck.h
@ -53,5 +53,5 @@
 #endif

 #if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI) && NOT_TARGET(STM32F4xx, STM32F1xx)
-  #error "TFT_COLOR_UI, TFT_LVGL_UI and TFT_CLASSIC_U are currently only supported on STM32F4 and STM32F1 hardware."
+  #error "TFT_COLOR_UI, TFT_LVGL_UI and TFT_CLASSIC_UI are currently only supported on STM32F4 and STM32F1 hardware."
 #endif
--- a/Marlin/src/HAL/STM32/pinsDebug.h
+++ b/Marlin/src/HAL/STM32/pinsDebug.h
@ -141,8 +141,7 @@ uint8_t get_pin_mode(const pin_t Ard_num) {
  uint32_t ll_pin  = STM_LL_GPIO_PIN(dp);
  GPIO_TypeDef *port = get_GPIO_Port(STM_PORT(dp));
  uint32_t mode = LL_GPIO_GetPinMode(port, ll_pin);
-  switch (mode)
-  {
+  switch (mode) {
    case LL_GPIO_MODE_ANALOG: return MODE_PIN_ANALOG;
    case LL_GPIO_MODE_INPUT: return MODE_PIN_INPUT;
    case LL_GPIO_MODE_OUTPUT: return MODE_PIN_OUTPUT;
--- a/Marlin/src/HAL/STM32/tft/tft_spi.cpp
+++ b/Marlin/src/HAL/STM32/tft/tft_spi.cpp
@ -40,8 +40,7 @@ void TFT_SPI::Init() {
  if ((spiInstance = (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_SCK_PIN),  PinMap_SPI_SCLK)) == NP) return;
  if (spiInstance != (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_MOSI_PIN), PinMap_SPI_MOSI)) return;

-  #if PIN_EXISTS(TFT_MISO)
-    if (TFT_MISO_PIN != TFT_MOSI_PIN)
+  #if PIN_EXISTS(TFT_MISO) && TFT_MISO_PIN != TFT_MOSI_PIN
    if (spiInstance != (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO)) return;
  #endif

@ -49,10 +48,7 @@ void TFT_SPI::Init() {
  SPIx.State                   = HAL_SPI_STATE_RESET;
  SPIx.Init.NSS                = SPI_NSS_SOFT;
  SPIx.Init.Mode               = SPI_MODE_MASTER;
-  if (TFT_MISO_PIN == TFT_MOSI_PIN)
-    SPIx.Init.Direction         = SPI_DIRECTION_1LINE;
-  else
-    SPIx.Init.Direction         = SPI_DIRECTION_2LINES;
+  SPIx.Init.Direction          = (TFT_MISO_PIN == TFT_MOSI_PIN) ? SPI_DIRECTION_1LINE : SPI_DIRECTION_2LINES;
  SPIx.Init.BaudRatePrescaler  = SPI_BAUDRATEPRESCALER_2;
  SPIx.Init.CLKPhase           = SPI_PHASE_1EDGE;
  SPIx.Init.CLKPolarity        = SPI_POLARITY_LOW;
@ -64,8 +60,7 @@ void TFT_SPI::Init() {

  pinmap_pinout(digitalPinToPinName(TFT_SCK_PIN), PinMap_SPI_SCLK);
  pinmap_pinout(digitalPinToPinName(TFT_MOSI_PIN), PinMap_SPI_MOSI);
-  #if PIN_EXISTS(TFT_MISO)
-    if (TFT_MISO_PIN != TFT_MOSI_PIN)
+  #if PIN_EXISTS(TFT_MISO) && TFT_MISO_PIN != TFT_MOSI_PIN
    pinmap_pinout(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO);
  #endif
  pin_PullConfig(get_GPIO_Port(STM_PORT(digitalPinToPinName(TFT_SCK_PIN))), STM_LL_GPIO_PIN(digitalPinToPinName(TFT_SCK_PIN)), GPIO_PULLDOWN);
@ -119,7 +114,7 @@ void TFT_SPI::Init() {
  DMAtx.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
  DMAtx.Init.Mode = DMA_NORMAL;
  DMAtx.Init.Priority = DMA_PRIORITY_LOW;
-  #if defined(STM32F4xx)
+  #ifdef STM32F4xx
    DMAtx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
  #endif
 }
@ -140,11 +135,10 @@ uint32_t TFT_SPI::GetID() {
 }

 uint32_t TFT_SPI::ReadID(uint16_t Reg) {
-  #if !PIN_EXISTS(TFT_MISO)
-    return 0;
-  #else
+  uint32_t Data = 0;
+  #if PIN_EXISTS(TFT_MISO)
    uint32_t BaudRatePrescaler = SPIx.Init.BaudRatePrescaler;
-    uint32_t i, Data = 0;
+    uint32_t i;

    SPIx.Init.BaudRatePrescaler = SPIx.Instance == SPI1 ? SPI_BAUDRATEPRESCALER_8 : SPI_BAUDRATEPRESCALER_4;
    DataTransferBegin(DATASIZE_8BIT);
@ -154,12 +148,12 @@ uint32_t TFT_SPI::ReadID(uint16_t Reg) {
    __HAL_SPI_ENABLE(&SPIx);

    for (i = 0; i < 4; i++) {
-      if (TFT_MISO_PIN != TFT_MOSI_PIN) {
+      #if TFT_MISO_PIN != TFT_MOSI_PIN
        //if (hspi->Init.Direction == SPI_DIRECTION_2LINES) {
          while ((SPIx.Instance->SR & SPI_FLAG_TXE) != SPI_FLAG_TXE) {}
          SPIx.Instance->DR = 0;
        //}
-      }
+      #endif
      while ((SPIx.Instance->SR & SPI_FLAG_RXNE) != SPI_FLAG_RXNE) {}
      Data = (Data << 8) | SPIx.Instance->DR;
    }
@ -168,9 +162,9 @@ uint32_t TFT_SPI::ReadID(uint16_t Reg) {
    DataTransferEnd();

    SPIx.Init.BaudRatePrescaler   = BaudRatePrescaler;
+  #endif

  return Data >> 7;
-  #endif
 }

 bool TFT_SPI::isBusy() {
@ -183,9 +177,8 @@ bool TFT_SPI::isBusy() {
    if (__HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TC_FLAG_INDEX(&DMAtx)) != 0 || __HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TE_FLAG_INDEX(&DMAtx)) != 0)
      Abort();
  }
-  else {
+  else
    Abort();
-  }
  return dmaEnabled;
 }

--- a/Marlin/src/pins/esp32/pins_MRR_ESPE.h
+++ b/Marlin/src/pins/esp32/pins_MRR_ESPE.h
@ -1,9 +1,9 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
--- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h
+++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h
@ -129,7 +129,8 @@
 #endif

 #if HAS_BTT_EXP_MOT
-/*               _____                                      _____
+
+  /**              _____                                      _____
   *           NC | · · | GND                             NC | · · | GND
   *           NC | · · | 1.31 (M1EN)            (M2EN) 1.23 | · · | 1.22 (M3EN)
   * (M1STP) 0.18 | · ·   3.25 (M1DIR)           (M1RX) 1.21 | · ·   1.20 (M1DIAG)
@ -153,6 +154,7 @@
      #define E2_SERIAL_RX_PIN      EXPA1_05_PIN
    #endif
  #endif
+
  // M2 on Driver Expansion Module
  #define E3_STEP_PIN               EXPA2_08_PIN
  #define E3_DIR_PIN                EXPA2_07_PIN
@ -167,6 +169,7 @@
  #else
    #define E3_ENABLE_PIN           EXPA2_04_PIN
  #endif
+
  // M3 on Driver Expansion Module
  #define E4_STEP_PIN               EXPA2_10_PIN
  #define E4_DIR_PIN                EXPA2_09_PIN
@ -181,4 +184,5 @@
  #else
    #define E4_ENABLE_PIN           EXPA2_04_PIN
  #endif
+
 #endif // HAS_BTT_EXP_MOT
--- a/Marlin/src/pins/ramps/pins_K8600.h
+++ b/Marlin/src/pins/ramps/pins_K8600.h
@ -1,9 +1,9 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
--- a/Marlin/src/pins/sanguino/pins_ZMIB_V2.h
+++ b/Marlin/src/pins/sanguino/pins_ZMIB_V2.h
@ -1,9 +1,9 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
--- a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h
+++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h
@ -1,9 +1,9 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
--- a/Marlin/src/pins/stm32f1/pins_CREALITY_V427.h
+++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V427.h
@ -1,9 +1,9 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
--- a/Marlin/src/pins/stm32f1/pins_CREALITY_V452.h
+++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V452.h
@ -1,9 +1,9 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (C) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@ -16,7 +16,7 @@
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */

--- a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h
+++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h
@ -16,7 +16,7 @@
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
 #pragma once