3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-27 22:08:02 +00:00
Code Issues Releases Wiki Activity

🩺 Assert FAN_SOFT_PWM where required (#23383)

Browse Source
This commit is contained in:
Scott Lahteine 2021-12-29 04:17:41 -06:00 committed by GitHub
parent 755c10d303
commit 88a6e5b691
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
19 changed files with 50 additions and 34 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
Marlin/src/inc/SanityCheck.h
View File

@ -2008,8 +2008,12 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#endif
#endif
#if HAS_FAN0 && CONTROLLER_FAN_PIN == FAN_PIN
#error "You cannot set CONTROLLER_FAN_PIN equal to FAN_PIN."
#if HAS_FAN0
#if CONTROLLER_FAN_PIN == FAN_PIN
#error "You cannot set CONTROLLER_FAN_PIN equal to FAN_PIN."
#elif ENABLED(FAN_SOFT_PWM_REQUIRED) && DISABLED(FAN_SOFT_PWM)
#error "FAN_SOFT_PWM is required. Enable it to continue."
#endif
#endif
#if ENABLED(USE_CONTROLLER_FAN)

2
Marlin/src/pins/mega/pins_MEGACONTROLLER.h
View File

@ -121,7 +121,7 @@
#define CONTROLLER_FAN_PIN FAN2_PIN
#endif
#define FAN_SOFT_PWM
#define FAN_SOFT_PWM_REQUIRED
//
// Misc. Functions

2
Marlin/src/pins/stm32f1/pins_BEAST.h
View File

@ -93,7 +93,7 @@
#define FAN_PIN PB10
#endif
#define FAN_SOFT_PWM
#define FAN_SOFT_PWM_REQUIRED
//
// Temperature Sensors

2
Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h
View File

@ -113,7 +113,7 @@
#define HEATER_BED_PIN PC9 // HOT BED
#define FAN_PIN PC6 // FAN
#define FAN_SOFT_PWM
#define FAN_SOFT_PWM_REQUIRED
#define CONTROLLER_FAN_PIN PC7

2
Marlin/src/pins/stm32f1/pins_CHITU3D.h
View File

@ -87,7 +87,7 @@
#define FAN_PIN PG14 // MAIN BOARD FAN
#endif
#define FAN_SOFT_PWM
#define FAN_SOFT_PWM_REQUIRED
//
// Temperature Sensors

4
Marlin/src/pins/stm32f1/pins_CREALITY_V4.h
View File

@ -143,9 +143,7 @@
#ifndef FAN_PIN
#define FAN_PIN PA0 // FAN
#endif
#if PIN_EXISTS(FAN)
#define FAN_SOFT_PWM
#endif
#define FAN_SOFT_PWM_REQUIRED
//
// SD Card

2
Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h
View File

@ -144,7 +144,7 @@
#define HEATER_BED_PIN PA1 // HOT BED
#define FAN_PIN PA2 // FAN
#define FAN_SOFT_PWM
#define FAN_SOFT_PWM_REQUIRED
//
// SD Card

2
Marlin/src/pins/stm32f1/pins_CREALITY_V45x.h
View File

@ -97,7 +97,7 @@
// Heaters / Fans
//
#define FAN_SOFT_PWM
#define FAN_SOFT_PWM_REQUIRED
//
// SD Card

7
Marlin/src/pins/stm32f1/pins_ERYONE_ERY32_MINI.h
View File

@ -38,10 +38,9 @@
//#define DISABLE_DEBUG
#define DISABLE_JTAG
//#define ENABLE_SPI3
#define FLASH_EEPROM_EMULATION
#define FAN_SOFT_PWM
#if ENABLED(FLASH_EEPROM_EMULATION)
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
#define FLASH_EEPROM_EMULATION
#define EEPROM_PAGE_SIZE (0x800U) // 2KB
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
#define MARLIN_EEPROM_SIZE (EEPROM_PAGE_SIZE)
@ -118,6 +117,8 @@
#endif
#endif
#define FAN_SOFT_PWM_REQUIRED
//
// Misc. Functions
//

10
Marlin/src/pins/stm32f1/pins_FLY_MINI.h
View File

@ -30,10 +30,12 @@
//
// Flash EEPROM Emulation
//
#define FLASH_EEPROM_EMULATION
#define EEPROM_PAGE_SIZE 0x800 // 2KB
#define EEPROM_START_ADDRESS (0x8000000 + 256 * 1024 - 2 * EEPROM_PAGE_SIZE) // 256K firmware space
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
#define FLASH_EEPROM_EMULATION
#define EEPROM_PAGE_SIZE 0x800 // 2KB
#define EEPROM_START_ADDRESS (0x8000000 + 256 * 1024 - 2 * EEPROM_PAGE_SIZE) // 256K firmware space
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
#endif
//
// Servos

18
Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h
View File

@ -90,13 +90,19 @@
#define FAN_PIN PA15 // pin 77 (4cm Fan)
#ifdef MAPLE_STM32F1
#define FAN_SOFT_PWM // Required to avoid issues with heating or STLink
#define FAN_MIN_PWM 35 // Fan will not start in 1-30 range
#define FAN_MAX_PWM 255
#define FAN_SOFT_PWM_REQUIRED
#if ENABLED(FAN_SOFT_PWM) && FAN_MIN_PWM < 35 // Required to avoid issues with heating or STLink
#error "FAN_MIN_PWM must be 35 or higher." // Fan will not start in 1-30 range
#endif
#elif ENABLED(FAST_PWM_FAN)
#if FAST_PWM_FAN_FREQUENCY != 31400 // Default 1000 is noisy, max 65K (uint16)
#error "FAST_PWM_FAN_FREQUENCY must be set to 31400."
#endif
#if FAN_MIN_PWM < 5
#error "FAN_MIN_PWM must be 5 or higher."
#endif
#else
#define FAST_PWM_FAN // STM32 Variant allow TIMER2 Hardware PWM
#define FAN_MIN_PWM 5
#define FAN_MAX_PWM 255
#error "FAST_PWM_FAN required to allow TIMER2 Hardware PWM."
#endif
//#define BEEPER_PIN PD13 // pin 60 (Servo PWM output 5V/GND on Board V0G+) made for BL-Touch sensor

2
Marlin/src/pins/stm32f1/pins_STM3R_MINI.h
View File

@ -91,7 +91,7 @@
#endif
#define FAN1_PIN PD13
#define FAN_SOFT_PWM
#define FAN_SOFT_PWM_REQUIRED
//
// Temperature Sensors

4
Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h
View File

@ -45,7 +45,9 @@
//
// EEPROM
//
#define FLASH_EEPROM_EMULATION
#if NO_EEPROM_SELECTED
#define FLASH_EEPROM_EMULATION
#endif
#if ENABLED(FLASH_EEPROM_EMULATION)
// SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)
#define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE)

6
Marlin/src/pins/stm32f4/pins_ARTILLERY_RUBY.h
View File

@ -29,8 +29,10 @@
#define BOARD_INFO_NAME "Artillery Ruby"
#define FLASH_EEPROM_EMULATION
//#define I2C_EEPROM
#if NO_EEPROM_SELECTED
#define FLASH_EEPROM_EMULATION
//#define I2C_EEPROM
#endif
//#define E2END 0xFFF // 4KB
#define HAL_TIMER_RATE F_CPU

2
Marlin/src/pins/stm32f4/pins_INDEX_REV03.h
View File

@ -119,7 +119,7 @@
#define FAN2_PIN PE4
#define FAN3_PIN PE5
#define FAN_SOFT_PWM
#define FAN_SOFT_PWM_REQUIRED
// Neopixel Rings
#define NEOPIXEL_PIN PC7

2
Marlin/src/pins/stm32f4/pins_RUMBA32_common.h
View File

@ -35,7 +35,7 @@
// Use soft PWM for fans - PWM is not working properly when paired with STM32 Arduino Core v1.7.0
// This can be removed when Core version is updated and PWM behaviour is fixed.
#define FAN_SOFT_PWM
#define FAN_SOFT_PWM_REQUIRED
//
// Configure Timers

2
buildroot/tests/STM32F103RET6_creality
View File

@ -30,7 +30,7 @@ exec_test $1 $2 "Ender 3 v2 with MarlinUI" "$3"
restore_configs
opt_set MOTHERBOARD BOARD_CREALITY_V452 SERIAL_PORT 1
opt_disable NOZZLE_TO_PROBE_OFFSET
opt_enable NOZZLE_AS_PROBE Z_SAFE_HOMING Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN \
opt_enable NOZZLE_AS_PROBE Z_SAFE_HOMING Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN FAN_SOFT_PWM \
PROBE_ACTIVATION_SWITCH PROBE_TARE PROBE_TARE_ONLY_WHILE_INACTIVE
exec_test $1 $2 "Creality V4.5.2 PROBE_ACTIVATION_SWITCH, Probe Tare" "$3"

2
buildroot/tests/STM32F103RE_btt_USB
View File

@ -15,7 +15,7 @@ exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Configuration" "$3"
restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_CR6 SERIAL_PORT -1 SERIAL_PORT_2 2 TEMP_SENSOR_BED 1
opt_enable CR10_STOCKDISPLAY \
opt_enable CR10_STOCKDISPLAY FAN_SOFT_PWM \
NOZZLE_AS_PROBE Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN Z_SAFE_HOMING \
PROBE_ACTIVATION_SWITCH PROBE_TARE PROBE_TARE_ONLY_WHILE_INACTIVE \
PROBING_HEATERS_OFF PREHEAT_BEFORE_PROBING

5
buildroot/tests/rumba32
View File

@ -11,7 +11,7 @@ restore_configs
opt_set MOTHERBOARD BOARD_RUMBA32_V1_0 SERIAL_PORT -1 \
TEMP_SENSOR_BED 1 X_DRIVER_TYPE TMC2130
opt_disable PIDTEMP
opt_enable PIDTEMPBED
opt_enable PIDTEMPBED FAN_SOFT_PWM
opt_disable THERMAL_PROTECTION_BED
exec_test $1 $2 "RUMBA32 V1.0 with TMC2130, PID Bed, and bed thermal protection disabled" "$3"
@ -19,12 +19,13 @@ exec_test $1 $2 "RUMBA32 V1.0 with TMC2130, PID Bed, and bed thermal protection
restore_configs
opt_set MOTHERBOARD BOARD_RUMBA32_V1_1 SERIAL_PORT -1 \
TEMP_SENSOR_BED 1 X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2208
opt_enable PIDTEMPBED EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
opt_enable PIDTEMPBED FAN_SOFT_PWM EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
exec_test $1 $2 "RUMBA32 V1.1 with TMC2130, TMC2208, PID Bed, EEPROM settings, and graphic LCD controller" "$3"
# Build examples
restore_configs
opt_set MOTHERBOARD BOARD_RUMBA32_MKS SERIAL_PORT -1 X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2208
opt_enable FAN_SOFT_PWM
exec_test $1 $2 "RUMBA32 MKS Default Config with Mixed TMC Drivers" "$3"
# cleanup