mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-26 13:25:54 +00:00
🔧 Config-related preparations
This commit is contained in:
Scott Lahteine
parent
0790a9d5df
commit
89b0143b09
@ -70,6 +70,8 @@
|
||||
#undef FILAMENT_RUNOUT_SENSOR
|
||||
#undef FILAMENT_RUNOUT_DISTANCE_MM
|
||||
#undef DISABLE_OTHER_EXTRUDERS
|
||||
#undef THERMAL_PROTECTION_HYSTERESIS
|
||||
#undef THERMAL_PROTECTION_PERIOD
|
||||
#endif
|
||||
|
||||
#define E_OPTARG(N) OPTARG(HAS_MULTI_EXTRUDER, N)
|
||||
@ -201,6 +203,10 @@
|
||||
#undef HOTEND_OFFSET_Z
|
||||
#endif
|
||||
|
||||
//
|
||||
// Remove irrelevant Configuration.h settings
|
||||
//
|
||||
|
||||
// Clean up E-stepper-based settings...
|
||||
#if E_STEPPERS <= 7
|
||||
#undef INVERT_E7_DIR
|
||||
@ -235,6 +241,72 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// Clean up unused temperature sensors and sub-options
|
||||
|
||||
#if !TEMP_SENSOR_0
|
||||
#undef TEMP_SENSOR_0
|
||||
#endif
|
||||
#if !TEMP_SENSOR_1
|
||||
#undef TEMP_SENSOR_1
|
||||
#endif
|
||||
#if !TEMP_SENSOR_2
|
||||
#undef TEMP_SENSOR_2
|
||||
#endif
|
||||
#if !TEMP_SENSOR_3
|
||||
#undef TEMP_SENSOR_3
|
||||
#endif
|
||||
#if !TEMP_SENSOR_4
|
||||
#undef TEMP_SENSOR_4
|
||||
#endif
|
||||
#if !TEMP_SENSOR_5
|
||||
#undef TEMP_SENSOR_5
|
||||
#endif
|
||||
#if !TEMP_SENSOR_6
|
||||
#undef TEMP_SENSOR_6
|
||||
#endif
|
||||
#if !TEMP_SENSOR_7
|
||||
#undef TEMP_SENSOR_7
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_BED
|
||||
#define HAS_HEATED_BED 1
|
||||
#else
|
||||
#undef TEMP_SENSOR_BED
|
||||
#undef THERMAL_PROTECTION_BED_HYSTERESIS
|
||||
#undef THERMAL_PROTECTION_BED_PERIOD
|
||||
#undef MAX_BED_POWER
|
||||
#endif
|
||||
#if !TEMP_SENSOR_CHAMBER
|
||||
#undef TEMP_SENSOR_CHAMBER
|
||||
#undef THERMAL_PROTECTION_CHAMBER_HYSTERESIS
|
||||
#undef THERMAL_PROTECTION_CHAMBER_PERIOD
|
||||
#undef CHAMBER_AUTO_FAN_PIN
|
||||
#undef CHAMBER_AUTO_FAN_SPEED
|
||||
#undef CHAMBER_AUTO_FAN_TEMPERATURE
|
||||
#undef MAX_CHAMBER_POWER
|
||||
#endif
|
||||
#if !TEMP_SENSOR_COOLER
|
||||
#undef TEMP_SENSOR_COOLER
|
||||
#undef COOLER_AUTO_FAN_PIN
|
||||
#undef COOLER_AUTO_FAN_SPEED
|
||||
#undef COOLER_AUTO_FAN_TEMPERATURE
|
||||
#endif
|
||||
#if !TEMP_SENSOR_PROBE
|
||||
#undef TEMP_SENSOR_PROBE
|
||||
#endif
|
||||
#if !TEMP_SENSOR_REDUNDANT
|
||||
#undef TEMP_SENSOR_REDUNDANT
|
||||
#endif
|
||||
#if !TEMP_SENSOR_BOARD
|
||||
#undef TEMP_SENSOR_BOARD
|
||||
#endif
|
||||
#if !TEMP_SENSOR_SOC
|
||||
#undef TEMP_SENSOR_SOC
|
||||
#endif
|
||||
#if !SOFT_PWM_SCALE
|
||||
#undef SOFT_PWM_SCALE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Number of Linear Axes (e.g., XYZIJKUVW)
|
||||
* All the logical axes except for the tool (E) axis
|
||||
@ -296,12 +368,20 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_Z_AXIS
|
||||
#ifdef Z4_DRIVER_TYPE
|
||||
#define NUM_Z_STEPPERS 4
|
||||
#elif defined(Z3_DRIVER_TYPE)
|
||||
#define NUM_Z_STEPPERS 3
|
||||
#elif defined(Z2_DRIVER_TYPE)
|
||||
#define NUM_Z_STEPPERS 2
|
||||
#else
|
||||
#define NUM_Z_STEPPERS 1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if !HAS_X_AXIS
|
||||
#undef AVOID_OBSTACLES
|
||||
#undef ENDSTOPPULLUP_XMIN
|
||||
#undef ENDSTOPPULLUP_XMAX
|
||||
#undef X_MIN_ENDSTOP_HIT_STATE
|
||||
#undef X_MAX_ENDSTOP_HIT_STATE
|
||||
#undef X2_DRIVER_TYPE
|
||||
#undef X_ENABLE_ON
|
||||
#undef DISABLE_X
|
||||
@ -312,14 +392,12 @@
|
||||
#undef MANUAL_X_HOME_POS
|
||||
#undef MIN_SOFTWARE_ENDSTOPS
|
||||
#undef MAX_SOFTWARE_ENDSTOPS
|
||||
#undef MIN_SOFTWARE_ENDSTOP_X
|
||||
#undef MAX_SOFTWARE_ENDSTOP_X
|
||||
#endif
|
||||
|
||||
#if !HAS_Y_AXIS
|
||||
#undef AVOID_OBSTACLES
|
||||
#undef ENDSTOPPULLUP_YMIN
|
||||
#undef ENDSTOPPULLUP_YMAX
|
||||
#undef Y_MIN_ENDSTOP_HIT_STATE
|
||||
#undef Y_MAX_ENDSTOP_HIT_STATE
|
||||
#undef Y2_DRIVER_TYPE
|
||||
#undef Y_ENABLE_ON
|
||||
#undef DISABLE_Y
|
||||
@ -332,21 +410,7 @@
|
||||
#undef MAX_SOFTWARE_ENDSTOP_Y
|
||||
#endif
|
||||
|
||||
#if HAS_Z_AXIS
|
||||
#ifdef Z4_DRIVER_TYPE
|
||||
#define NUM_Z_STEPPERS 4
|
||||
#elif defined(Z3_DRIVER_TYPE)
|
||||
#define NUM_Z_STEPPERS 3
|
||||
#elif defined(Z2_DRIVER_TYPE)
|
||||
#define NUM_Z_STEPPERS 2
|
||||
#else
|
||||
#define NUM_Z_STEPPERS 1
|
||||
#endif
|
||||
#else
|
||||
#undef ENDSTOPPULLUP_ZMIN
|
||||
#undef ENDSTOPPULLUP_ZMAX
|
||||
#undef Z_MIN_ENDSTOP_HIT_STATE
|
||||
#undef Z_MAX_ENDSTOP_HIT_STATE
|
||||
#if !HAS_Z_AXIS
|
||||
#undef Z2_DRIVER_TYPE
|
||||
#undef Z3_DRIVER_TYPE
|
||||
#undef Z4_DRIVER_TYPE
|
||||
@ -363,10 +427,6 @@
|
||||
#endif
|
||||
|
||||
#if !HAS_I_AXIS
|
||||
#undef ENDSTOPPULLUP_IMIN
|
||||
#undef ENDSTOPPULLUP_IMAX
|
||||
#undef I_MIN_ENDSTOP_HIT_STATE
|
||||
#undef I_MAX_ENDSTOP_HIT_STATE
|
||||
#undef I_ENABLE_ON
|
||||
#undef DISABLE_I
|
||||
#undef INVERT_I_DIR
|
||||
@ -379,10 +439,6 @@
|
||||
#endif
|
||||
|
||||
#if !HAS_J_AXIS
|
||||
#undef ENDSTOPPULLUP_JMIN
|
||||
#undef ENDSTOPPULLUP_JMAX
|
||||
#undef J_MIN_ENDSTOP_HIT_STATE
|
||||
#undef J_MAX_ENDSTOP_HIT_STATE
|
||||
#undef J_ENABLE_ON
|
||||
#undef DISABLE_J
|
||||
#undef INVERT_J_DIR
|
||||
@ -395,10 +451,6 @@
|
||||
#endif
|
||||
|
||||
#if !HAS_K_AXIS
|
||||
#undef ENDSTOPPULLUP_KMIN
|
||||
#undef ENDSTOPPULLUP_KMAX
|
||||
#undef K_MIN_ENDSTOP_HIT_STATE
|
||||
#undef K_MAX_ENDSTOP_HIT_STATE
|
||||
#undef K_ENABLE_ON
|
||||
#undef DISABLE_K
|
||||
#undef INVERT_K_DIR
|
||||
@ -411,10 +463,6 @@
|
||||
#endif
|
||||
|
||||
#if !HAS_U_AXIS
|
||||
#undef ENDSTOPPULLUP_UMIN
|
||||
#undef ENDSTOPPULLUP_UMAX
|
||||
#undef U_MIN_ENDSTOP_HIT_STATE
|
||||
#undef U_MAX_ENDSTOP_HIT_STATE
|
||||
#undef U_ENABLE_ON
|
||||
#undef DISABLE_U
|
||||
#undef INVERT_U_DIR
|
||||
@ -427,10 +475,6 @@
|
||||
#endif
|
||||
|
||||
#if !HAS_V_AXIS
|
||||
#undef ENDSTOPPULLUP_VMIN
|
||||
#undef ENDSTOPPULLUP_VMAX
|
||||
#undef V_MIN_ENDSTOP_HIT_STATE
|
||||
#undef V_MAX_ENDSTOP_HIT_STATE
|
||||
#undef V_ENABLE_ON
|
||||
#undef DISABLE_V
|
||||
#undef INVERT_V_DIR
|
||||
@ -443,10 +487,6 @@
|
||||
#endif
|
||||
|
||||
#if !HAS_W_AXIS
|
||||
#undef ENDSTOPPULLUP_WMIN
|
||||
#undef ENDSTOPPULLUP_WMAX
|
||||
#undef W_MIN_ENDSTOP_HIT_STATE
|
||||
#undef W_MAX_ENDSTOP_HIT_STATE
|
||||
#undef W_ENABLE_ON
|
||||
#undef DISABLE_W
|
||||
#undef INVERT_W_DIR
|
||||
@ -1151,6 +1191,19 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Unused LCD options
|
||||
*/
|
||||
#if NONE(HAS_MARLINUI_HD44780, IS_DWIN_MARLINUI, IS_TFTGLCD_PANEL) && !MB(SIMULATED)
|
||||
#undef DISPLAY_CHARSET_HD44780
|
||||
#endif
|
||||
#if !HAS_MARLINUI_HD44780
|
||||
#undef LCD_INFO_SCREEN_STYLE
|
||||
#endif
|
||||
#if NONE(HAS_MARLINUI_U8GLIB, HAS_TFT_LVGL_UI)
|
||||
#undef LCD_LANGUAGE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Disable unused SINGLENOZZLE sub-options
|
||||
*/
|
||||
@ -1585,6 +1638,14 @@
|
||||
#define PROBE_SELECTED 1
|
||||
#endif
|
||||
|
||||
#if !HAS_MESH
|
||||
#undef MESH_INSET
|
||||
#endif
|
||||
|
||||
#if DISABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
||||
#undef DEFAULT_LEVELING_FADE_HEIGHT
|
||||
#endif
|
||||
|
||||
#ifdef GRID_MAX_POINTS_X
|
||||
#define GRID_MAX_POINTS ((GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y))
|
||||
#define GRID_LOOP(A,B) for (uint8_t A = 0; A < GRID_MAX_POINTS_X; ++A) for (uint8_t B = 0; B < GRID_MAX_POINTS_Y; ++B)
|
||||
|
||||
@ -83,6 +83,9 @@
|
||||
|
||||
// Convenience override for a BLTouch alone
|
||||
#if ENABLED(BLTOUCH)
|
||||
#ifndef BLTOUCH_DELAY
|
||||
#define BLTOUCH_DELAY 500
|
||||
#endif
|
||||
#ifdef BLTOUCH_HS_MODE
|
||||
#define HAS_BLTOUCH_HS_MODE 1
|
||||
#endif
|
||||
@ -622,6 +625,10 @@
|
||||
#define HAS_MAX31865 1
|
||||
#endif
|
||||
|
||||
#if !HAS_MAX_TC
|
||||
#undef THERMOCOUPLE_MAX_ERRORS
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_3 == -4
|
||||
#define TEMP_SENSOR_3_IS_AD8495 1
|
||||
#elif TEMP_SENSOR_3 == -3
|
||||
@ -819,6 +826,15 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if !ANY_THERMISTOR_IS(-1)
|
||||
#undef TEMP_SENSOR_AD595_GAIN
|
||||
#undef TEMP_SENSOR_AD595_OFFSET
|
||||
#endif
|
||||
#if !ANY_THERMISTOR_IS(-4)
|
||||
#undef TEMP_SENSOR_AD8495_GAIN
|
||||
#undef TEMP_SENSOR_AD8495_OFFSET
|
||||
#endif
|
||||
|
||||
#if HAS_MULTI_EXTRUDER || HAS_MULTI_HOTEND || HAS_PRUSA_MMU2 || (ENABLED(MIXING_EXTRUDER) && MIXING_VIRTUAL_TOOLS > 1)
|
||||
#define HAS_TOOLCHANGE 1
|
||||
#endif
|
||||
@ -869,6 +885,10 @@
|
||||
#define HAS_PRINT_PROGRESS 1
|
||||
#endif
|
||||
|
||||
#if !ALL(HAS_MARLINUI_MENU, HAS_MEDIA)
|
||||
#undef SD_MENU_CONFIRM_START
|
||||
#endif
|
||||
|
||||
#if DISABLED(SET_PROGRESS_MANUALLY)
|
||||
#undef SET_REMAINING_TIME
|
||||
#undef SET_INTERACTION_TIME
|
||||
|
||||
@ -387,8 +387,10 @@
|
||||
#undef Z_SAFE_HOMING
|
||||
#endif
|
||||
|
||||
#ifndef MESH_INSET
|
||||
#define MESH_INSET 0
|
||||
#ifdef MESH_INSET
|
||||
#define _MESH_INSET (MESH_INSET)
|
||||
#else
|
||||
#define _MESH_INSET 0
|
||||
#endif
|
||||
|
||||
/**
|
||||
@ -397,7 +399,7 @@
|
||||
#if ENABLED(Z_SAFE_HOMING)
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
// Home close to center so grid points have z heights very close to 0
|
||||
#define _SAFE_POINT(A) (((GRID_MAX_POINTS_##A) / 2) * (A##_BED_SIZE - 2 * (MESH_INSET)) / (GRID_MAX_POINTS_##A - 1) + MESH_INSET)
|
||||
#define _SAFE_POINT(A) (((GRID_MAX_POINTS_##A) / 2) * (A##_BED_SIZE - 2 * _MESH_INSET) / (GRID_MAX_POINTS_##A - 1) + _MESH_INSET)
|
||||
#else
|
||||
#define _SAFE_POINT(A) A##_CENTER
|
||||
#endif
|
||||
@ -428,13 +430,6 @@
|
||||
#define MAX_AUTORETRACT 99
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Provide a DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT in case NO_VOLUMETRICS is enabled
|
||||
*/
|
||||
#ifndef DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT
|
||||
#define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT 0.00
|
||||
#endif
|
||||
|
||||
/**
|
||||
* LCD Contrast for Graphical Displays
|
||||
*/
|
||||
@ -2350,6 +2345,138 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if !USE_X_MIN
|
||||
#undef ENDSTOPPULLUP_XMIN
|
||||
#undef ENDSTOPPULLDOWN_XMIN
|
||||
#endif
|
||||
#if !USE_X_MAX
|
||||
#undef ENDSTOPPULLUP_XMAX
|
||||
#undef ENDSTOPPULLDOWN_XMAX
|
||||
#endif
|
||||
#if !USE_Y_MIN
|
||||
#undef ENDSTOPPULLUP_YMIN
|
||||
#undef ENDSTOPPULLDOWN_YMIN
|
||||
#endif
|
||||
#if !USE_Y_MAX
|
||||
#undef ENDSTOPPULLUP_YMAX
|
||||
#undef ENDSTOPPULLDOWN_YMAX
|
||||
#endif
|
||||
#if !USE_Z_MIN
|
||||
#undef ENDSTOPPULLUP_ZMIN
|
||||
#undef ENDSTOPPULLDOWN_ZMIN
|
||||
#endif
|
||||
#if !USE_Z_MAX
|
||||
#undef ENDSTOPPULLUP_ZMAX
|
||||
#undef ENDSTOPPULLDOWN_ZMAX
|
||||
#endif
|
||||
#if !USE_I_MIN
|
||||
#undef ENDSTOPPULLUP_IMIN
|
||||
#undef ENDSTOPPULLDOWN_IMIN
|
||||
#endif
|
||||
#if !USE_I_MAX
|
||||
#undef ENDSTOPPULLUP_IMAX
|
||||
#undef ENDSTOPPULLDOWN_IMAX
|
||||
#endif
|
||||
#if !USE_J_MIN
|
||||
#undef ENDSTOPPULLUP_JMIN
|
||||
#undef ENDSTOPPULLDOWN_JMIN
|
||||
#endif
|
||||
#if !USE_J_MAX
|
||||
#undef ENDSTOPPULLUP_JMAX
|
||||
#undef ENDSTOPPULLDOWN_JMAX
|
||||
#endif
|
||||
#if !USE_K_MIN
|
||||
#undef ENDSTOPPULLUP_KMIN
|
||||
#undef ENDSTOPPULLDOWN_KMIN
|
||||
#endif
|
||||
#if !USE_K_MAX
|
||||
#undef ENDSTOPPULLUP_KMAX
|
||||
#undef ENDSTOPPULLDOWN_KMAX
|
||||
#endif
|
||||
#if !USE_U_MIN
|
||||
#undef ENDSTOPPULLUP_UMIN
|
||||
#undef ENDSTOPPULLDOWN_UMIN
|
||||
#endif
|
||||
#if !USE_U_MAX
|
||||
#undef ENDSTOPPULLUP_UMAX
|
||||
#undef ENDSTOPPULLDOWN_UMAX
|
||||
#endif
|
||||
#if !USE_V_MIN
|
||||
#undef ENDSTOPPULLUP_VMIN
|
||||
#undef ENDSTOPPULLDOWN_VMIN
|
||||
#endif
|
||||
#if !USE_V_MAX
|
||||
#undef ENDSTOPPULLUP_VMAX
|
||||
#undef ENDSTOPPULLDOWN_VMAX
|
||||
#endif
|
||||
#if !USE_W_MIN
|
||||
#undef ENDSTOPPULLUP_WMIN
|
||||
#undef ENDSTOPPULLDOWN_WMIN
|
||||
#endif
|
||||
#if !USE_W_MAX
|
||||
#undef ENDSTOPPULLUP_WMAX
|
||||
#undef ENDSTOPPULLDOWN_WMAX
|
||||
#endif
|
||||
|
||||
#define PCAT(P) P##_PIN
|
||||
#define NEED_HIT_STATE(P) (USE_##P || (PIN_EXISTS(P##_PIN) && ((defined(X2_STOP_PIN) && X2_STOP_PIN == PCAT(P)) || (defined(Y2_STOP_PIN) && Y2_STOP_PIN == PCAT(P)) || (defined(Z2_STOP_PIN) && Z2_STOP_PIN == PCAT(P)) || (defined(Z3_STOP_PIN) && Z3_STOP_PIN == PCAT(P)) || (defined(Z4_STOP_PIN) && Z4_STOP_PIN == PCAT(P)))))
|
||||
#if !NEED_HIT_STATE(X_MIN)
|
||||
#undef X_MIN_ENDSTOP_HIT_STATE
|
||||
#endif
|
||||
#if !NEED_HIT_STATE(X_MAX)
|
||||
#undef X_MAX_ENDSTOP_HIT_STATE
|
||||
#endif
|
||||
#if !NEED_HIT_STATE(Y_MIN)
|
||||
#undef Y_MIN_ENDSTOP_HIT_STATE
|
||||
#endif
|
||||
#if !NEED_HIT_STATE(Y_MAX)
|
||||
#undef Y_MAX_ENDSTOP_HIT_STATE
|
||||
#endif
|
||||
#if !NEED_HIT_STATE(Z_MIN)
|
||||
#undef Z_MIN_ENDSTOP_HIT_STATE
|
||||
#endif
|
||||
#if !NEED_HIT_STATE(Z_MAX)
|
||||
#undef Z_MAX_ENDSTOP_HIT_STATE
|
||||
#endif
|
||||
#if !NEED_HIT_STATE(I_MIN)
|
||||
#undef I_MIN_ENDSTOP_HIT_STATE
|
||||
#endif
|
||||
#if !NEED_HIT_STATE(I_MAX)
|
||||
#undef I_MAX_ENDSTOP_HIT_STATE
|
||||
#endif
|
||||
#if !NEED_HIT_STATE(J_MIN)
|
||||
#undef J_MIN_ENDSTOP_HIT_STATE
|
||||
#endif
|
||||
#if !NEED_HIT_STATE(J_MAX)
|
||||
#undef J_MAX_ENDSTOP_HIT_STATE
|
||||
#endif
|
||||
#if !NEED_HIT_STATE(K_MIN)
|
||||
#undef K_MIN_ENDSTOP_HIT_STATE
|
||||
#endif
|
||||
#if !NEED_HIT_STATE(K_MAX)
|
||||
#undef K_MAX_ENDSTOP_HIT_STATE
|
||||
#endif
|
||||
#if !NEED_HIT_STATE(U_MIN)
|
||||
#undef U_MIN_ENDSTOP_HIT_STATE
|
||||
#endif
|
||||
#if !NEED_HIT_STATE(U_MAX)
|
||||
#undef U_MAX_ENDSTOP_HIT_STATE
|
||||
#endif
|
||||
#if !NEED_HIT_STATE(V_MIN)
|
||||
#undef V_MIN_ENDSTOP_HIT_STATE
|
||||
#endif
|
||||
#if !NEED_HIT_STATE(V_MAX)
|
||||
#undef V_MAX_ENDSTOP_HIT_STATE
|
||||
#endif
|
||||
#if !NEED_HIT_STATE(W_MIN)
|
||||
#undef W_MIN_ENDSTOP_HIT_STATE
|
||||
#endif
|
||||
#if !NEED_HIT_STATE(W_MAX)
|
||||
#undef W_MAX_ENDSTOP_HIT_STATE
|
||||
#endif
|
||||
#undef NEED_HIT_STATE
|
||||
#undef PCAT
|
||||
|
||||
//
|
||||
// ADC Temp Sensors (Thermistor or Thermocouple with amplifier ADC interface)
|
||||
//
|
||||
@ -2573,8 +2700,10 @@
|
||||
#if HAS_TEMP_COOLER && PIN_EXISTS(COOLER_AUTO_FAN)
|
||||
#define HAS_AUTO_COOLER_FAN 1
|
||||
#endif
|
||||
|
||||
#if ANY(HAS_AUTO_FAN_0, HAS_AUTO_FAN_1, HAS_AUTO_FAN_2, HAS_AUTO_FAN_3, HAS_AUTO_FAN_4, HAS_AUTO_FAN_5, HAS_AUTO_FAN_6, HAS_AUTO_FAN_7, HAS_AUTO_CHAMBER_FAN, HAS_AUTO_COOLER_FAN)
|
||||
#if ANY(HAS_AUTO_FAN_0, HAS_AUTO_FAN_1, HAS_AUTO_FAN_2, HAS_AUTO_FAN_3, HAS_AUTO_FAN_4, HAS_AUTO_FAN_5, HAS_AUTO_FAN_6, HAS_AUTO_FAN_7)
|
||||
#define HAS_E_AUTO_FAN 1
|
||||
#endif
|
||||
#if ANY(HAS_E_AUTO_FAN, HAS_AUTO_CHAMBER_FAN, HAS_AUTO_COOLER_FAN)
|
||||
#define HAS_AUTO_FAN 1
|
||||
#define _FANOVERLAP(I,T) (T##_AUTO_FAN_PIN == E##I##_AUTO_FAN_PIN)
|
||||
#if HAS_AUTO_CHAMBER_FAN
|
||||
@ -2632,6 +2761,19 @@
|
||||
#define HAS_AUTO_REPORTING 1
|
||||
#endif
|
||||
|
||||
#if !HAS_AUTO_CHAMBER_FAN
|
||||
#undef CHAMBER_AUTO_FAN_SPEED
|
||||
#undef CHAMBER_AUTO_FAN_TEMPERATURE
|
||||
#endif
|
||||
#if !HAS_AUTO_COOLER_FAN
|
||||
#undef COOLER_AUTO_FAN_SPEED
|
||||
#undef COOLER_AUTO_FAN_TEMPERATURE
|
||||
#endif
|
||||
#if !HAS_E_AUTO_FAN
|
||||
#undef EXTRUDER_AUTO_FAN_SPEED
|
||||
#undef EXTRUDER_AUTO_FAN_TEMPERATURE
|
||||
#endif
|
||||
|
||||
#if !HAS_AUTO_CHAMBER_FAN || AUTO_CHAMBER_IS_E
|
||||
#undef AUTO_POWER_CHAMBER_FAN
|
||||
#endif
|
||||
@ -2750,6 +2892,10 @@
|
||||
|
||||
#if PIN_EXISTS(FANMUX0)
|
||||
#define HAS_FANMUX 1 // Part Cooling fan multipliexer
|
||||
#else
|
||||
#undef FANMUX0_PIN
|
||||
#undef FANMUX1_PIN
|
||||
#undef FANMUX2_PIN
|
||||
#endif
|
||||
|
||||
/**
|
||||
@ -2855,6 +3001,8 @@
|
||||
#endif
|
||||
#if ANY(HAS_X_MS_PINS, HAS_X2_MS_PINS, HAS_Y_MS_PINS, HAS_Y2_MS_PINS, HAS_SOME_Z_MS_PINS, HAS_I_MS_PINS, HAS_J_MS_PINS, HAS_K_MS_PINS, HAS_U_MS_PINS, HAS_V_MS_PINS, HAS_W_MS_PINS, HAS_SOME_E_MS_PINS)
|
||||
#define HAS_MICROSTEPS 1
|
||||
#else
|
||||
#undef MICROSTEP_MODES
|
||||
#endif
|
||||
|
||||
/**
|
||||
@ -3149,10 +3297,6 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifndef DEFAULT_LEVELING_FADE_HEIGHT
|
||||
#define DEFAULT_LEVELING_FADE_HEIGHT 0.0
|
||||
#endif
|
||||
|
||||
#if ENABLED(SEGMENT_LEVELED_MOVES) && !defined(LEVELED_SEGMENT_LENGTH)
|
||||
#define LEVELED_SEGMENT_LENGTH 5
|
||||
#endif
|
||||
@ -3165,16 +3309,16 @@
|
||||
// Probing points may be verified at compile time within the radius
|
||||
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(PRINTABLE_RADIUS),"bad probe point!")
|
||||
// so that may be added to SanityCheck.h in the future.
|
||||
#define _MESH_MIN_X (X_MIN_BED + (MESH_INSET))
|
||||
#define _MESH_MIN_Y (Y_MIN_BED + (MESH_INSET))
|
||||
#define _MESH_MAX_X (X_MAX_BED - (MESH_INSET))
|
||||
#define _MESH_MAX_Y (Y_MAX_BED - (MESH_INSET))
|
||||
#define _MESH_MIN_X (X_MIN_BED + _MESH_INSET)
|
||||
#define _MESH_MIN_Y (Y_MIN_BED + _MESH_INSET)
|
||||
#define _MESH_MAX_X (X_MAX_BED - _MESH_INSET)
|
||||
#define _MESH_MAX_Y (Y_MAX_BED - _MESH_INSET)
|
||||
#else
|
||||
// Boundaries for Cartesian probing based on set limits
|
||||
#define _MESH_MIN_X (_MAX(X_MIN_BED + (MESH_INSET), X_MIN_POS)) // UBL is careful not to probe off the bed. It doesn't
|
||||
#define _MESH_MIN_Y (_MAX(Y_MIN_BED + (MESH_INSET), Y_MIN_POS)) // need NOZZLE_TO_PROBE_OFFSET in the mesh dimensions.
|
||||
#define _MESH_MAX_X (_MIN(X_MAX_BED - (MESH_INSET), X_MAX_POS))
|
||||
#define _MESH_MAX_Y (_MIN(Y_MAX_BED - (MESH_INSET), Y_MAX_POS))
|
||||
#define _MESH_MIN_X (_MAX(X_MIN_BED + _MESH_INSET, X_MIN_POS)) // UBL is careful not to probe off the bed. It doesn't
|
||||
#define _MESH_MIN_Y (_MAX(Y_MIN_BED + _MESH_INSET, Y_MIN_POS)) // need NOZZLE_TO_PROBE_OFFSET in the mesh dimensions.
|
||||
#define _MESH_MAX_X (_MIN(X_MAX_BED - _MESH_INSET, X_MAX_POS))
|
||||
#define _MESH_MAX_Y (_MIN(Y_MAX_BED - _MESH_INSET, Y_MAX_POS))
|
||||
#endif
|
||||
|
||||
// These may be overridden in Configuration.h if a smaller area is desired
|
||||
|
||||
@ -1622,6 +1622,9 @@ void RTS::handleData() {
|
||||
|
||||
float meshVal = float(recdat.data[0] - (recdat.data[0] >= 32768 ? 65536 : 0)) / 1000;
|
||||
|
||||
#ifndef Z_PROBE_LOW_POINT
|
||||
#define Z_PROBE_LOW_POINT -2
|
||||
#endif
|
||||
LIMIT(meshVal, Z_PROBE_LOW_POINT, Z_CLEARANCE_BETWEEN_PROBES);
|
||||
xy_uint8_t point = { xPnt, yPnt };
|
||||
setMeshPoint(point, meshVal);
|
||||
|
||||
@ -816,7 +816,7 @@ void MarlinUI::init() {
|
||||
// Add a manual move to the queue?
|
||||
if (axis == NO_AXIS_ENUM || PENDING(millis(), start_time) || planner.is_full()) return;
|
||||
|
||||
const feedRate_t fr_mm_s = (axis < LOGICAL_AXES) ? manual_feedrate_mm_s[axis] : XY_PROBE_FEEDRATE_MM_S;
|
||||
const feedRate_t fr_mm_s = (axis < LOGICAL_AXES) ? manual_feedrate_mm_s[axis] : PLANNER_XY_FEEDRATE_MM_S;
|
||||
|
||||
/**
|
||||
* For a rotational axis apply the "inch" to "mm" conversion factor. This mimics behaviour of the G-code G1
|
||||
|
||||
@ -571,7 +571,7 @@ void do_blocking_move_to(NUM_AXIS_ARGS_(const_float_t) const_feedRate_t fr_mm_s/
|
||||
if (DEBUGGING(LEVELING)) DEBUG_XYZ("> ", NUM_AXIS_ARGS());
|
||||
#endif
|
||||
|
||||
const feedRate_t xy_feedrate = fr_mm_s ?: feedRate_t(XY_PROBE_FEEDRATE_MM_S);
|
||||
const feedRate_t xy_feedrate = fr_mm_s ?: feedRate_t(PLANNER_XY_FEEDRATE_MM_S);
|
||||
|
||||
#if HAS_Z_AXIS
|
||||
const feedRate_t z_feedrate = fr_mm_s ?: homing_feedrate(Z_AXIS);
|
||||
@ -1492,7 +1492,7 @@ float get_move_distance(const xyze_pos_t &diff OPTARG(HAS_ROTATIONAL_AXES, bool
|
||||
if (planner.buffer_line(raised, fr_zfast)) {
|
||||
// 2. Move to the current native XY and raised Z. Presumably this is a null move.
|
||||
xyze_pos_t curpos = current_position; curpos.z = raised_parked_position.z;
|
||||
if (planner.buffer_line(curpos, PLANNER_XY_FEEDRATE())) {
|
||||
if (planner.buffer_line(curpos, PLANNER_XY_FEEDRATE_MM_S)) {
|
||||
// 3. Lower Z back down
|
||||
line_to_current_position(fr_zfast);
|
||||
}
|
||||
|
||||
@ -68,7 +68,7 @@ extern xyz_pos_t cartes;
|
||||
#elif defined(XY_PROBE_FEEDRATE)
|
||||
#define XY_PROBE_FEEDRATE_MM_S MMM_TO_MMS(XY_PROBE_FEEDRATE)
|
||||
#else
|
||||
#define XY_PROBE_FEEDRATE_MM_S PLANNER_XY_FEEDRATE()
|
||||
#define XY_PROBE_FEEDRATE_MM_S PLANNER_XY_FEEDRATE_MM_S
|
||||
#endif
|
||||
|
||||
#if HAS_BED_PROBE
|
||||
|
||||
@ -1114,7 +1114,13 @@ class Planner {
|
||||
#endif // HAS_JUNCTION_DEVIATION
|
||||
};
|
||||
|
||||
#define PLANNER_XY_FEEDRATE() _MIN(planner.settings.max_feedrate_mm_s[X_AXIS], planner.settings.max_feedrate_mm_s[Y_AXIS])
|
||||
#if HAS_Y_AXIS
|
||||
#define PLANNER_XY_FEEDRATE_MM_S _MIN(planner.settings.max_feedrate_mm_s[X_AXIS], planner.settings.max_feedrate_mm_s[Y_AXIS])
|
||||
#elif HAS_X_AXIS
|
||||
#define PLANNER_XY_FEEDRATE_MM_S planner.settings.max_feedrate_mm_s[X_AXIS]
|
||||
#else
|
||||
#define PLANNER_XY_FEEDRATE_MM_S 60.0f
|
||||
#endif
|
||||
|
||||
#define ANY_AXIS_MOVES(BLOCK) \
|
||||
(false NUM_AXIS_GANG( \
|
||||
|
||||
@ -349,8 +349,10 @@ public:
|
||||
#endif
|
||||
|
||||
private:
|
||||
static bool probe_down_to_z(const_float_t z, const_feedRate_t fr_mm_s);
|
||||
static float run_z_probe(const bool sanity_check=true, const_float_t z_min_point=Z_PROBE_LOW_POINT, const_float_t z_clearance=Z_TWEEN_SAFE_CLEARANCE);
|
||||
#if HAS_BED_PROBE
|
||||
static bool probe_down_to_z(const_float_t z, const_feedRate_t fr_mm_s);
|
||||
static float run_z_probe(const bool sanity_check=true, const_float_t z_min_point=Z_PROBE_LOW_POINT, const_float_t z_clearance=Z_TWEEN_SAFE_CLEARANCE);
|
||||
#endif
|
||||
};
|
||||
|
||||
extern Probe probe;
|
||||
|
||||
@ -931,7 +931,10 @@ void MarlinSettings::postprocess() {
|
||||
// Global Leveling
|
||||
//
|
||||
{
|
||||
const float zfh = TERN(ENABLE_LEVELING_FADE_HEIGHT, planner.z_fade_height, (DEFAULT_LEVELING_FADE_HEIGHT));
|
||||
#ifndef DEFAULT_LEVELING_FADE_HEIGHT
|
||||
#define DEFAULT_LEVELING_FADE_HEIGHT 0
|
||||
#endif
|
||||
const float zfh = TERN(ENABLE_LEVELING_FADE_HEIGHT, planner.z_fade_height, DEFAULT_LEVELING_FADE_HEIGHT);
|
||||
EEPROM_WRITE(zfh);
|
||||
}
|
||||
|
||||
@ -1320,7 +1323,7 @@ void MarlinSettings::postprocess() {
|
||||
#if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
|
||||
EEPROM_WRITE(planner.volumetric_extruder_limit);
|
||||
#else
|
||||
dummyf = DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT;
|
||||
dummyf = 0.0;
|
||||
for (uint8_t q = EXTRUDERS; q--;) EEPROM_WRITE(dummyf);
|
||||
#endif
|
||||
|
||||
@ -1330,7 +1333,7 @@ void MarlinSettings::postprocess() {
|
||||
EEPROM_WRITE(volumetric_enabled);
|
||||
dummyf = DEFAULT_NOMINAL_FILAMENT_DIA;
|
||||
for (uint8_t q = EXTRUDERS; q--;) EEPROM_WRITE(dummyf);
|
||||
dummyf = DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT;
|
||||
dummyf = 0.0;
|
||||
for (uint8_t q = EXTRUDERS; q--;) EEPROM_WRITE(dummyf);
|
||||
|
||||
#endif
|
||||
@ -3311,7 +3314,7 @@ void MarlinSettings::reset() {
|
||||
//
|
||||
// Global Leveling
|
||||
//
|
||||
TERN_(ENABLE_LEVELING_FADE_HEIGHT, new_z_fade_height = (DEFAULT_LEVELING_FADE_HEIGHT));
|
||||
TERN_(ENABLE_LEVELING_FADE_HEIGHT, new_z_fade_height = DEFAULT_LEVELING_FADE_HEIGHT);
|
||||
TERN_(HAS_LEVELING, reset_bed_level());
|
||||
|
||||
//
|
||||
|
||||
@ -70,6 +70,52 @@
|
||||
#include "../feature/spindle_laser.h"
|
||||
#endif
|
||||
|
||||
#ifndef TEMP_SENSOR_0
|
||||
#define TEMP_SENSOR_0 0
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_1
|
||||
#define TEMP_SENSOR_1 0
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_2
|
||||
#define TEMP_SENSOR_2 0
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_3
|
||||
#define TEMP_SENSOR_3 0
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_4
|
||||
#define TEMP_SENSOR_4 0
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_5
|
||||
#define TEMP_SENSOR_5 0
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_6
|
||||
#define TEMP_SENSOR_6 0
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_7
|
||||
#define TEMP_SENSOR_7 0
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_BED
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_BOARD
|
||||
#define TEMP_SENSOR_BOARD 0
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_CHAMBER
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_COOLER
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_PROBE
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_REDUNDANT
|
||||
#define TEMP_SENSOR_REDUNDANT 0
|
||||
#endif
|
||||
#ifndef TEMP_SENSOR_SOC
|
||||
#define TEMP_SENSOR_SOC 0
|
||||
#endif
|
||||
|
||||
// MAX TC related macros
|
||||
#define TEMP_SENSOR_IS_MAX(n, M) (ENABLED(TEMP_SENSOR_##n##_IS_MAX##M) || (ENABLED(TEMP_SENSOR_REDUNDANT_IS_MAX##M) && REDUNDANT_TEMP_MATCH(SOURCE, E##n)))
|
||||
|
||||
|
||||
@ -13,6 +13,7 @@ opt_set MOTHERBOARD BOARD_RAMPS4DUE_EFB \
|
||||
GRID_MAX_POINTS_X 16 \
|
||||
E0_AUTO_FAN_PIN 8 FANMUX0_PIN 53 EXTRUDER_AUTO_FAN_SPEED 100 \
|
||||
TEMP_SENSOR_CHAMBER 3 TEMP_CHAMBER_PIN 6 HEATER_CHAMBER_PIN 45 \
|
||||
BACKLASH_MEASUREMENT_FEEDRATE 600 \
|
||||
TRAMMING_POINT_XY '{{20,20},{20,20},{20,20},{20,20},{20,20}}' TRAMMING_POINT_NAME_5 '"Point 5"'
|
||||
opt_enable S_CURVE_ACCELERATION EEPROM_SETTINGS GCODE_MACROS \
|
||||
FIX_MOUNTED_PROBE Z_SAFE_HOMING CODEPENDENT_XY_HOMING \
|
||||
|
||||
@ -14,8 +14,8 @@ opt_set MOTHERBOARD BOARD_RAMBO \
|
||||
EXTRUDERS 2 TEMP_SENSOR_0 -2 TEMP_SENSOR_1 1 TEMP_SENSOR_BED 2 \
|
||||
TEMP_SENSOR_PROBE 1 TEMP_PROBE_PIN 12 \
|
||||
TEMP_SENSOR_CHAMBER 3 TEMP_CHAMBER_PIN 3 HEATER_CHAMBER_PIN 45 \
|
||||
GRID_MAX_POINTS_X 16 AUTO_POWER_E_TEMP 80 \
|
||||
FANMUX0_PIN 53 FIL_MOTION1_PIN 45
|
||||
GRID_MAX_POINTS_X 16 BACKLASH_MEASUREMENT_FEEDRATE 600 \
|
||||
AUTO_POWER_E_TEMP 80 FANMUX0_PIN 53 FIL_MOTION1_PIN 45
|
||||
opt_disable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN USE_WATCHDOG
|
||||
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST \
|
||||
FIX_MOUNTED_PROBE CODEPENDENT_XY_HOMING PIDTEMPBED PTC_PROBE PTC_BED \
|
||||
|
||||
@ -98,7 +98,7 @@ exec_test $1 $2 "Teensy 3.5/3.6 COREXY" "$3"
|
||||
# Enable COREXZ
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_TEENSY35_36
|
||||
opt_set MOTHERBOARD BOARD_TEENSY35_36 BACKLASH_MEASUREMENT_FEEDRATE 600
|
||||
opt_enable COREXZ BACKLASH_COMPENSATION BACKLASH_GCODE CORE_BACKLASH
|
||||
exec_test $1 $2 "Teensy 3.5/3.6 COREXZ | BACKLASH" "$3"
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user