3DPrinting/MarlinFirmware
0
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2025-01-22 17:52:57 +00:00
Code Issues Releases Wiki Activity

🪠 More granular sub-options undef (#27373)

Browse source
This commit is contained in:
Scott Lahteine 2024-08-28 20:41:12 -05:00 committed by GitHub
parent 934fc52d06
commit 8ac0f14796
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
8 changed files with 1464 additions and 1251 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
Marlin/Configuration.h
View file

@ -106,7 +106,7 @@
/**
* Select a third serial port on the board to use for communication with the host.
* Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1
* Currently supported for AVR, DUE, SAMD51, LPC1768/9, STM32/STM32F1/HC32, and Teensy 4.x
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
*/
//#define SERIAL_PORT_3 1

10
Marlin/src/HAL/SAMD51/HAL.h
View file

@ -69,6 +69,16 @@
#endif
#endif
#ifdef SERIAL_PORT_3
#if SERIAL_PORT_3 == -1
#define MYSERIAL3 MSerial0
#elif WITHIN(SERIAL_PORT_3, 0, 3)
#define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
#else
#error "SERIAL_PORT_3 must be from 0 to 3. You can also use -1 if the board supports Native USB."
#endif
#endif
#ifdef MMU2_SERIAL_PORT
#if MMU2_SERIAL_PORT == -1
#define MMU2_SERIAL MSerial0

1216
Marlin/src/inc/Conditionals_LCD.h
View file

File diff suppressed because it is too large Load diff

112
Marlin/src/inc/Conditionals_adv.h
View file

@ -108,7 +108,6 @@
//#define LCD_SHOW_E_TOTAL
#define NO_WORKSPACE_OFFSETS
#define NO_HOME_OFFSETS
#undef AUTOTEMP
#undef CALIBRATION_MEASURE_LEFT
#undef CALIBRATION_MEASURE_RIGHT
#undef CALIBRATION_MEASURE_XMAX
@ -295,17 +294,9 @@
#undef HEATER_1_MAXTEMP
#undef HEATER_1_MINTEMP
#if HOTENDS < 1
#undef AUTOTEMP
#undef E0_AUTO_FAN_PIN
#undef HEATER_0_MAXTEMP
#undef HEATER_0_MINTEMP
#undef PID_PARAMS_PER_HOTEND
#undef PIDTEMP
#undef MPCTEMP
#undef PREVENT_COLD_EXTRUSION
#undef THERMAL_PROTECTION_HOTENDS
#undef THERMAL_PROTECTION_PERIOD
#undef WATCH_TEMP_PERIOD
#endif
#endif
#endif
@ -825,44 +816,50 @@
#undef TEMP_SENSOR_AD8495_OFFSET
#endif
#if !HAS_HOTEND
#if !ALL(HAS_X_AXIS, HAS_HOTEND)
#undef AUTOTEMP
#endif
#if DISABLED(THERMAL_PROTECTION_HOTENDS)
#undef THERMAL_PROTECTION_PERIOD
#undef THERMAL_PROTECTION_HYSTERESIS
#undef WATCH_TEMP_PERIOD
#undef WATCH_TEMP_INCREASE
#undef ADAPTIVE_FAN_SLOWING
#undef REPORT_ADAPTIVE_FAN_SLOWING
#undef TEMP_TUNING_MAINTAIN_FAN
#endif
#if !ALL(HAS_HOTEND, PIDTEMP)
#undef PID_PARAMS_PER_HOTEND
#endif
#if !TEMP_SENSOR_BED
#undef THERMAL_PROTECTION_BED
#undef BED_MINTEMP
#undef BED_MAXTEMP
#endif
#if DISABLED(THERMAL_PROTECTION_BED)
#undef THERMAL_PROTECTION_BED_PERIOD
#undef THERMAL_PROTECTION_BED_HYSTERESIS
#undef WATCH_BED_TEMP_PERIOD
#undef WATCH_BED_TEMP_INCREASE
#undef BED_MINTEMP
#undef BED_MAXTEMP
#endif
#if !TEMP_SENSOR_CHAMBER
#undef THERMAL_PROTECTION_CHAMBER
#undef CHAMBER_MINTEMP
#undef CHAMBER_MAXTEMP
#endif
#if DISABLED(THERMAL_PROTECTION_CHAMBER)
#undef THERMAL_PROTECTION_CHAMBER_PERIOD
#undef THERMAL_PROTECTION_CHAMBER_HYSTERESIS
#undef WATCH_CHAMBER_TEMP_PERIOD
#undef WATCH_CHAMBER_TEMP_INCREASE
#undef CHAMBER_MINTEMP
#undef CHAMBER_MAXTEMP
#endif
#if !TEMP_SENSOR_COOLER
#undef THERMAL_PROTECTION_COOLER
#undef COOLER_MINTEMP
#undef COOLER_MAXTEMP
#endif
#if DISABLED(THERMAL_PROTECTION_COOLER)
#undef THERMAL_PROTECTION_COOLER_PERIOD
#undef THERMAL_PROTECTION_COOLER_HYSTERESIS
#undef WATCH_COOLER_TEMP_PERIOD
#undef WATCH_COOLER_TEMP_INCREASE
#undef COOLER_MINTEMP
#undef COOLER_MAXTEMP
#endif
#if HAS_MULTI_EXTRUDER || HAS_MULTI_HOTEND || HAS_PRUSA_MMU2 || HAS_PRUSA_MMU3 || (ENABLED(MIXING_EXTRUDER) && MIXING_VIRTUAL_TOOLS > 1)
@ -1406,31 +1403,6 @@
#endif
#endif
// Toolchange Event G-code
#if !HAS_MULTI_EXTRUDER || !(defined(EVENT_GCODE_TOOLCHANGE_T0) || defined(EVENT_GCODE_TOOLCHANGE_T1) || defined(EVENT_GCODE_TOOLCHANGE_T2) || defined(EVENT_GCODE_TOOLCHANGE_T3) || defined(EVENT_GCODE_TOOLCHANGE_T4) || defined(EVENT_GCODE_TOOLCHANGE_T5) || defined(EVENT_GCODE_TOOLCHANGE_T6) || defined(EVENT_GCODE_TOOLCHANGE_T7))
#undef TC_GCODE_USE_GLOBAL_X
#undef TC_GCODE_USE_GLOBAL_Y
#undef TC_GCODE_USE_GLOBAL_Z
#endif
// TOOLCHANGE_MIGRATION_FEATURE - Clean up after sloppy auto config
#if DISABLED(TOOLCHANGE_MIGRATION_FEATURE)
#undef MIGRATION_ZRAISE
#undef MIGRATION_FS_EXTRA_PRIME
#undef MIGRATION_FS_WIPE_RETRACT
#undef MIGRATION_FS_FAN_SPEED
#undef MIGRATION_FS_FAN_TIME
#undef TOOLCHANGE_MIGRATION_DO_PARK
#endif
// TOOLCHANGE_PARK - Clean up after sloppy auto config
#if DISABLED(TOOLCHANGE_PARK)
#undef TOOLCHANGE_PARK_XY
#undef TOOLCHANGE_PARK_XY_FEEDRATE
#undef TOOLCHANGE_PARK_X_ONLY
#undef TOOLCHANGE_PARK_Y_ONLY
#undef TOOLCHANGE_MIGRATION_DO_PARK
#endif
// Multi-Stepping Limit
#ifndef MULTISTEPPING_LIMIT
#define MULTISTEPPING_LIMIT 128
@ -1442,16 +1414,6 @@
#define NUM_REDUNDANT_FANS 1
#endif
// Clean up if only mm units are used
#if DISABLED(INCH_MODE_SUPPORT)
#undef MANUAL_MOVE_DISTANCE_IN
#endif
// Clean up if no rotational axes exist
#if !HAS_ROTATIONAL_AXES
#undef MANUAL_MOVE_DISTANCE_DEG
#endif
// Power-Loss Recovery
#if ENABLED(POWER_LOSS_RECOVERY)
#ifdef PLR_BED_THRESHOLD
@ -1461,3 +1423,39 @@
#define HAS_PLR_UI_FLAG 1 // recovery.ui_flag_resume
#endif
#endif
// Toolchange Event G-code
#if !HAS_MULTI_EXTRUDER || !(defined(EVENT_GCODE_TOOLCHANGE_T0) || defined(EVENT_GCODE_TOOLCHANGE_T1) || defined(EVENT_GCODE_TOOLCHANGE_T2) || defined(EVENT_GCODE_TOOLCHANGE_T3) || defined(EVENT_GCODE_TOOLCHANGE_T4) || defined(EVENT_GCODE_TOOLCHANGE_T5) || defined(EVENT_GCODE_TOOLCHANGE_T6) || defined(EVENT_GCODE_TOOLCHANGE_T7))
#undef TC_GCODE_USE_GLOBAL_X
#undef TC_GCODE_USE_GLOBAL_Y
#undef TC_GCODE_USE_GLOBAL_Z
#endif
// Clean up for TOOLCHANGE_MIGRATION_FEATURE
#if DISABLED(TOOLCHANGE_MIGRATION_FEATURE)
#undef MIGRATION_ZRAISE
#undef MIGRATION_FS_EXTRA_PRIME
#undef MIGRATION_FS_WIPE_RETRACT
#undef MIGRATION_FS_FAN_SPEED
#undef MIGRATION_FS_FAN_TIME
#undef TOOLCHANGE_MIGRATION_DO_PARK
#endif
// Clean up for TOOLCHANGE_PARK
#if DISABLED(TOOLCHANGE_PARK)
#undef TOOLCHANGE_PARK_XY
#undef TOOLCHANGE_PARK_XY_FEEDRATE
#undef TOOLCHANGE_PARK_X_ONLY
#undef TOOLCHANGE_PARK_Y_ONLY
#undef TOOLCHANGE_MIGRATION_DO_PARK
#endif
// Clean up if only mm units are used
#if DISABLED(INCH_MODE_SUPPORT)
#undef MANUAL_MOVE_DISTANCE_IN
#endif
// Clean up if no rotational axes exist
#if !HAS_ROTATIONAL_AXES
#undef MANUAL_MOVE_DISTANCE_DEG
#endif

698
Marlin/src/inc/Conditionals_axes.h Normal file
View file

@ -0,0 +1,698 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Conditionals_axes.h
* Conditionals that need to be set before Configuration_adv.h or pins.h
*/
/**
* Extruders have some combination of stepper motors and hotends
* so we separate these concepts into the defines:
*
* EXTRUDERS - Number of Selectable Tools
* HOTENDS - Number of hotends, whether connected or separate
* E_STEPPERS - Number of actual E stepper motors
* E_MANUAL - Number of E steppers for LCD move options
*
* These defines must be simple constants for use in REPEAT, etc.
*/
#if EXTRUDERS
#define HAS_EXTRUDERS 1
#if EXTRUDERS > 1
#define HAS_MULTI_EXTRUDER 1
#endif
#define E_AXIS_N(E) AxisEnum(E_AXIS + E_INDEX_N(E))
#else
#undef EXTRUDERS
#define EXTRUDERS 0
#endif
#define E_OPTARG(N) OPTARG(HAS_MULTI_EXTRUDER, N)
#define E_TERN_(N) TERN_(HAS_MULTI_EXTRUDER, N)
#define E_TERN0(N) TERN0(HAS_MULTI_EXTRUDER, N)
#if ANY(SWITCHING_EXTRUDER, MECHANICAL_SWITCHING_EXTRUDER)
#define HAS_SWITCHING_EXTRUDER 1
#endif
#if ANY(SWITCHING_NOZZLE, MECHANICAL_SWITCHING_NOZZLE)
#define HAS_SWITCHING_NOZZLE 1
#endif
/**
* Multi-Material-Unit supported models
*/
#ifdef MMU_MODEL
#define HAS_MMU 1
#define SINGLENOZZLE
#define _PRUSA_MMU1 1
#define _PRUSA_MMU2 2
#define _PRUSA_MMU2S 3
#define _PRUSA_MMU3 4
#define _EXTENDABLE_EMU_MMU2 12
#define _EXTENDABLE_EMU_MMU2S 13
#define _EXTENDABLE_EMU_MMU3 14
#define _MMU CAT(_,MMU_MODEL)
#if _MMU == _PRUSA_MMU1
#define HAS_PRUSA_MMU1 1
#elif _MMU % 10 == _PRUSA_MMU2
#define HAS_PRUSA_MMU2 1
#elif _MMU % 10 == _PRUSA_MMU2S
#define HAS_PRUSA_MMU2 1
#define HAS_PRUSA_MMU2S 1
#elif _MMU % 10 == _PRUSA_MMU3
#define HAS_PRUSA_MMU3 1
#endif
#if _MMU == _EXTENDABLE_EMU_MMU2 || _MMU == _EXTENDABLE_EMU_MMU2S
#define HAS_EXTENDABLE_MMU 1
#endif
#undef _MMU
#undef _PRUSA_MMU1
#undef _PRUSA_MMU2
#undef _PRUSA_MMU2S
#undef _PRUSA_MMU3
#undef _EXTENDABLE_EMU_MMU2
#undef _EXTENDABLE_EMU_MMU2S
#undef _EXTENDABLE_EMU_MMU3
#endif
#if ENABLED(E_DUAL_STEPPER_DRIVERS) // E0/E1 steppers act in tandem as E0
#define E_STEPPERS 2
#define E_MANUAL 1
#elif HAS_SWITCHING_EXTRUDER // One stepper for every two EXTRUDERS
#if EXTRUDERS > 4
#define E_STEPPERS 3
#elif EXTRUDERS > 2
#define E_STEPPERS 2
#else
#define E_STEPPERS 1
#endif
#elif ENABLED(MIXING_EXTRUDER) // Multiple feeds are mixed proportionally
#define E_STEPPERS MIXING_STEPPERS
#define E_MANUAL 1
#if MIXING_STEPPERS == 2
#define HAS_DUAL_MIXING 1
#endif
#ifndef MIXING_VIRTUAL_TOOLS
#define MIXING_VIRTUAL_TOOLS 1
#endif
#elif ENABLED(SWITCHING_TOOLHEAD) // Toolchanger
#define E_STEPPERS EXTRUDERS
#define E_MANUAL EXTRUDERS
#elif HAS_PRUSA_MMU2 || HAS_PRUSA_MMU3 // Průša Multi-Material Unit v2/v3
#define E_STEPPERS 1
#define E_MANUAL 1
#endif
// Default E steppers / manual motion is one per extruder
#ifndef E_STEPPERS
#define E_STEPPERS EXTRUDERS
#endif
#ifndef E_MANUAL
#define E_MANUAL EXTRUDERS
#endif
// Number of hotends...
#if ANY(SINGLENOZZLE, MIXING_EXTRUDER) // Only one for singlenozzle or mixing extruder
#define HOTENDS 1
#elif HAS_SWITCHING_EXTRUDER && !HAS_SWITCHING_NOZZLE // One for each pair of abstract "extruders"
#define HOTENDS E_STEPPERS
#elif TEMP_SENSOR_0
#define HOTENDS EXTRUDERS // One per extruder if at least one heater exists
#else
#define HOTENDS 0 // A machine with no hotends at all can still extrude
#endif
// At least one hotend...
#if HOTENDS
#define HAS_HOTEND 1
#ifndef HOTEND_OVERSHOOT
#define HOTEND_OVERSHOOT 15
#endif
#endif
// More than one hotend...
#if HOTENDS > 1
#define HAS_MULTI_HOTEND 1
#define HAS_HOTEND_OFFSET 1
#ifndef HOTEND_OFFSET_X
#define HOTEND_OFFSET_X { 0 } // X offsets for each extruder
#endif
#ifndef HOTEND_OFFSET_Y
#define HOTEND_OFFSET_Y { 0 } // Y offsets for each extruder
#endif
#ifndef HOTEND_OFFSET_Z
#define HOTEND_OFFSET_Z { 0 } // Z offsets for each extruder
#endif
#endif
/**
* Number of Linear Axes (e.g., XYZIJKUVW)
* All the logical axes except for the tool (E) axis
*/
#ifdef NUM_AXES
#undef NUM_AXES
#define NUM_AXES_WARNING 1
#endif
#ifdef W_DRIVER_TYPE
#define NUM_AXES 9
#elif defined(V_DRIVER_TYPE)
#define NUM_AXES 8
#elif defined(U_DRIVER_TYPE)
#define NUM_AXES 7
#elif defined(K_DRIVER_TYPE)
#define NUM_AXES 6
#elif defined(J_DRIVER_TYPE)
#define NUM_AXES 5
#elif defined(I_DRIVER_TYPE)
#define NUM_AXES 4
#elif defined(Z_DRIVER_TYPE)
#define NUM_AXES 3
#elif defined(Y_DRIVER_TYPE)
#define NUM_AXES 2
#elif defined(X_DRIVER_TYPE)
#define NUM_AXES 1
#else
#define NUM_AXES 0
#endif
#if NUM_AXES >= 1
#define HAS_X_AXIS 1
#define HAS_A_AXIS 1
#if NUM_AXES >= XY
#define HAS_Y_AXIS 1
#define HAS_B_AXIS 1
#if NUM_AXES >= XYZ
#define HAS_Z_AXIS 1
#define HAS_C_AXIS 1
#if NUM_AXES >= 4
#define HAS_I_AXIS 1
#if NUM_AXES >= 5
#define HAS_J_AXIS 1
#if NUM_AXES >= 6
#define HAS_K_AXIS 1
#if NUM_AXES >= 7
#define HAS_U_AXIS 1
#if NUM_AXES >= 8
#define HAS_V_AXIS 1
#if NUM_AXES >= 9
#define HAS_W_AXIS 1
#endif
#endif
#endif
#endif
#endif
#endif
#endif
#endif
#endif
#if HAS_Z_AXIS
#ifdef Z4_DRIVER_TYPE
#define NUM_Z_STEPPERS 4
#elif defined(Z3_DRIVER_TYPE)
#define NUM_Z_STEPPERS 3
#elif defined(Z2_DRIVER_TYPE)
#define NUM_Z_STEPPERS 2
#else
#define NUM_Z_STEPPERS 1
#endif
#endif
#if !HAS_X_AXIS
#undef AVOID_OBSTACLES
#undef X2_DRIVER_TYPE
#undef X_ENABLE_ON
#undef DISABLE_X
#undef INVERT_X_DIR
#undef X_HOME_DIR
#undef X_MIN_POS
#undef X_MAX_POS
#undef MANUAL_X_HOME_POS
#undef MIN_SOFTWARE_ENDSTOPS
#undef MAX_SOFTWARE_ENDSTOPS
#undef MIN_SOFTWARE_ENDSTOP_X
#undef MAX_SOFTWARE_ENDSTOP_X
#endif
#if !HAS_Y_AXIS
#undef AVOID_OBSTACLES
#undef Y2_DRIVER_TYPE
#undef Y_ENABLE_ON
#undef DISABLE_Y
#undef INVERT_Y_DIR
#undef Y_HOME_DIR
#undef Y_MIN_POS
#undef Y_MAX_POS
#undef MANUAL_Y_HOME_POS
#undef MIN_SOFTWARE_ENDSTOP_Y
#undef MAX_SOFTWARE_ENDSTOP_Y
#endif
#if !HAS_Z_AXIS
#undef Z2_DRIVER_TYPE
#undef Z3_DRIVER_TYPE
#undef Z4_DRIVER_TYPE
#undef Z_ENABLE_ON
#undef DISABLE_Z
#undef INVERT_Z_DIR
#undef Z_HOME_DIR
#undef Z_MIN_POS
#undef Z_MAX_POS
#undef MANUAL_Z_HOME_POS
#undef Z_SAFE_HOMING
#undef MIN_SOFTWARE_ENDSTOP_Z
#undef MAX_SOFTWARE_ENDSTOP_Z
#endif
#if !HAS_I_AXIS
#undef I_ENABLE_ON
#undef DISABLE_I
#undef INVERT_I_DIR
#undef I_HOME_DIR
#undef I_MIN_POS
#undef I_MAX_POS
#undef MANUAL_I_HOME_POS
#undef MIN_SOFTWARE_ENDSTOP_I
#undef MAX_SOFTWARE_ENDSTOP_I
#endif
#if !HAS_J_AXIS
#undef J_ENABLE_ON
#undef DISABLE_J
#undef INVERT_J_DIR
#undef J_HOME_DIR
#undef J_MIN_POS
#undef J_MAX_POS
#undef MANUAL_J_HOME_POS
#undef MIN_SOFTWARE_ENDSTOP_J
#undef MAX_SOFTWARE_ENDSTOP_J
#endif
#if !HAS_K_AXIS
#undef K_ENABLE_ON
#undef DISABLE_K
#undef INVERT_K_DIR
#undef K_HOME_DIR
#undef K_MIN_POS
#undef K_MAX_POS
#undef MANUAL_K_HOME_POS
#undef MIN_SOFTWARE_ENDSTOP_K
#undef MAX_SOFTWARE_ENDSTOP_K
#endif
#if !HAS_U_AXIS
#undef U_ENABLE_ON
#undef DISABLE_U
#undef INVERT_U_DIR
#undef U_HOME_DIR
#undef U_MIN_POS
#undef U_MAX_POS
#undef MANUAL_U_HOME_POS
#undef MIN_SOFTWARE_ENDSTOP_U
#undef MAX_SOFTWARE_ENDSTOP_U
#endif
#if !HAS_V_AXIS
#undef V_ENABLE_ON
#undef DISABLE_V
#undef INVERT_V_DIR
#undef V_HOME_DIR
#undef V_MIN_POS
#undef V_MAX_POS
#undef MANUAL_V_HOME_POS
#undef MIN_SOFTWARE_ENDSTOP_V
#undef MAX_SOFTWARE_ENDSTOP_V
#endif
#if !HAS_W_AXIS
#undef W_ENABLE_ON
#undef DISABLE_W
#undef INVERT_W_DIR
#undef W_HOME_DIR
#undef W_MIN_POS
#undef W_MAX_POS
#undef MANUAL_W_HOME_POS
#undef MIN_SOFTWARE_ENDSTOP_W
#undef MAX_SOFTWARE_ENDSTOP_W
#endif
// Clean up E-stepper-based settings...
#if E_STEPPERS <= 7
#undef INVERT_E7_DIR
#undef E7_DRIVER_TYPE
#if E_STEPPERS <= 6
#undef INVERT_E6_DIR
#undef E6_DRIVER_TYPE
#if E_STEPPERS <= 5
#undef INVERT_E5_DIR
#undef E5_DRIVER_TYPE
#if E_STEPPERS <= 4
#undef INVERT_E4_DIR
#undef E4_DRIVER_TYPE
#if E_STEPPERS <= 3
#undef INVERT_E3_DIR
#undef E3_DRIVER_TYPE
#if E_STEPPERS <= 2
#undef INVERT_E2_DIR
#undef E2_DRIVER_TYPE
#if E_STEPPERS <= 1
#undef INVERT_E1_DIR
#undef E1_DRIVER_TYPE
#if E_STEPPERS == 0
#undef INVERT_E0_DIR
#undef E0_DRIVER_TYPE
#endif
#endif
#endif
#endif
#endif
#endif
#endif
#endif
#define _OR_HAS_DA(A) ENABLED(DISABLE_##A) ||
#if MAP(_OR_HAS_DA, X, Y, Z, I, J, K, U, V, W) 0
#define HAS_DISABLE_MAIN_AXES 1
#endif
#if HAS_DISABLE_MAIN_AXES || ENABLED(DISABLE_E)
#define HAS_DISABLE_AXES 1
#endif
#undef _OR_HAS_DA
#ifdef X2_DRIVER_TYPE
#define HAS_X2_STEPPER 1
#endif
#ifdef Y2_DRIVER_TYPE
#define HAS_Y2_STEPPER 1
#endif
/**
* Number of Primary Linear Axes (e.g., XYZ)
* X, XY, or XYZ axes. Excluding duplicate axes (X2, Y2, Z2, Z3, Z4)
*/
#if NUM_AXES >= 3
#define PRIMARY_LINEAR_AXES 3
#else
#define PRIMARY_LINEAR_AXES NUM_AXES
#endif
/**
* Number of Secondary Axes (e.g., IJKUVW)
* All linear/rotational axes between XYZ and E.
*/
#define SECONDARY_AXES SUB3(NUM_AXES)
/**
* Number of Rotational Axes (e.g., IJK)
* All axes for which AXIS*_ROTATES is defined.
* For these axes, positions are specified in angular degrees.
*/
#if ENABLED(AXIS9_ROTATES)
#define ROTATIONAL_AXES 6
#elif ENABLED(AXIS8_ROTATES)
#define ROTATIONAL_AXES 5
#elif ENABLED(AXIS7_ROTATES)
#define ROTATIONAL_AXES 4
#elif ENABLED(AXIS6_ROTATES)
#define ROTATIONAL_AXES 3
#elif ENABLED(AXIS5_ROTATES)
#define ROTATIONAL_AXES 2
#elif ENABLED(AXIS4_ROTATES)
#define ROTATIONAL_AXES 1
#else
#define ROTATIONAL_AXES 0
#endif
#if ROTATIONAL_AXES
#define HAS_ROTATIONAL_AXES 1
#endif
/**
* Number of Secondary Linear Axes (e.g., UVW)
* All secondary axes for which AXIS*_ROTATES is not defined.
* Excluding primary axes and excluding duplicate axes (X2, Y2, Z2, Z3, Z4)
*/
#define SECONDARY_LINEAR_AXES (NUM_AXES - PRIMARY_LINEAR_AXES - ROTATIONAL_AXES)
/**
* Number of Logical Axes (e.g., XYZIJKUVWE)
* All logical axes that can be commanded directly by G-code.
* Delta maps stepper-specific values to ABC steppers.
*/
#if HAS_EXTRUDERS
#define LOGICAL_AXES INCREMENT(NUM_AXES)
#else
#define LOGICAL_AXES NUM_AXES
#endif
/**
* DISTINCT_E_FACTORS is set to give extruders (some) individual settings.
*
* DISTINCT_AXES is the number of distinct addressable axes (not steppers).
* Includes all linear axes plus all distinguished extruders.
* The default behavior is to treat all extruders as a single E axis
* with shared motion and temperature settings.
*
* DISTINCT_E is the number of distinguished extruders. By default this
* will be 1 which indicates all extruders share the same settings.
*
* E_INDEX_N(E) should be used to get the E index of any item that might be
* distinguished.
*/
#if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1
#define DISTINCT_AXES (NUM_AXES + E_STEPPERS)
#define DISTINCT_E E_STEPPERS
#define E_INDEX_N(E) (E)
#else
#undef DISTINCT_E_FACTORS
#define DISTINCT_AXES LOGICAL_AXES
#define DISTINCT_E 1
#define E_INDEX_N(E) 0
#endif
// Helper macros for extruder and hotend arrays
#define _EXTRUDER_LOOP(E) for (int8_t E = 0; E < EXTRUDERS; E++)
#define EXTRUDER_LOOP() _EXTRUDER_LOOP(e)
#define _HOTEND_LOOP(H) for (int8_t H = 0; H < HOTENDS; H++)
#define HOTEND_LOOP() _HOTEND_LOOP(e)
#define ARRAY_BY_EXTRUDERS(V...) ARRAY_N(EXTRUDERS, V)
#define ARRAY_BY_EXTRUDERS1(v1) ARRAY_N_1(EXTRUDERS, v1)
#define ARRAY_BY_HOTENDS(V...) ARRAY_N(HOTENDS, V)
#define ARRAY_BY_HOTENDS1(v1) ARRAY_N_1(HOTENDS, v1)
/**
* Extruders have some combination of stepper motors and hotends
* so we separate these concepts into the defines:
*
* EXTRUDERS - Number of Selectable Tools
* HOTENDS - Number of hotends, whether connected or separate
* E_STEPPERS - Number of actual E stepper motors
* E_MANUAL - Number of E steppers for LCD move options
*
* These defines must be simple constants for use in REPEAT, etc.
*/
#if EXTRUDERS
#define HAS_EXTRUDERS 1
#if EXTRUDERS > 1
#define HAS_MULTI_EXTRUDER 1
#endif
#define E_AXIS_N(E) AxisEnum(E_AXIS + E_INDEX_N(E))
#else
#undef EXTRUDERS
#define EXTRUDERS 0
#undef TEMP_SENSOR_0
#undef TEMP_SENSOR_1
#undef TEMP_SENSOR_2
#undef TEMP_SENSOR_3
#undef TEMP_SENSOR_4
#undef TEMP_SENSOR_5
#undef TEMP_SENSOR_6
#undef TEMP_SENSOR_7
#undef SINGLENOZZLE
#undef SWITCHING_EXTRUDER
#undef MECHANICAL_SWITCHING_EXTRUDER
#undef SWITCHING_NOZZLE
#undef MECHANICAL_SWITCHING_NOZZLE
#undef MIXING_EXTRUDER
#undef HOTEND_IDLE_TIMEOUT
#undef DISABLE_E
#undef PREVENT_LENGTHY_EXTRUDE
#undef FILAMENT_RUNOUT_SENSOR
#undef FILAMENT_RUNOUT_DISTANCE_MM
#undef DISABLE_OTHER_EXTRUDERS
#endif
#define E_OPTARG(N) OPTARG(HAS_MULTI_EXTRUDER, N)
#define E_TERN_(N) TERN_(HAS_MULTI_EXTRUDER, N)
#define E_TERN0(N) TERN0(HAS_MULTI_EXTRUDER, N)
#if ANY(SWITCHING_EXTRUDER, MECHANICAL_SWITCHING_EXTRUDER)
#define HAS_SWITCHING_EXTRUDER 1
#endif
#if ANY(SWITCHING_NOZZLE, MECHANICAL_SWITCHING_NOZZLE)
#define HAS_SWITCHING_NOZZLE 1
#endif
/**
* Multi-Material-Unit supported models
*/
#ifdef MMU_MODEL
#define HAS_MMU 1
#define SINGLENOZZLE
#define _PRUSA_MMU1 1
#define _PRUSA_MMU2 2
#define _PRUSA_MMU2S 3
#define _PRUSA_MMU3 4
#define _EXTENDABLE_EMU_MMU2 12
#define _EXTENDABLE_EMU_MMU2S 13
#define _EXTENDABLE_EMU_MMU3 14
#define _MMU CAT(_,MMU_MODEL)
#if _MMU == _PRUSA_MMU1
#define HAS_PRUSA_MMU1 1
#elif _MMU % 10 == _PRUSA_MMU2
#define HAS_PRUSA_MMU2 1
#elif _MMU % 10 == _PRUSA_MMU2S
#define HAS_PRUSA_MMU2 1
#define HAS_PRUSA_MMU2S 1
#elif _MMU % 10 == _PRUSA_MMU3
#define HAS_PRUSA_MMU3 1
#endif
#if _MMU == _EXTENDABLE_EMU_MMU2 || _MMU == _EXTENDABLE_EMU_MMU2S
#define HAS_EXTENDABLE_MMU 1
#endif
#undef _MMU
#undef _PRUSA_MMU1
#undef _PRUSA_MMU2
#undef _PRUSA_MMU2S
#undef _PRUSA_MMU3
#undef _EXTENDABLE_EMU_MMU2
#undef _EXTENDABLE_EMU_MMU2S
#undef _EXTENDABLE_EMU_MMU3
#endif
#if ENABLED(E_DUAL_STEPPER_DRIVERS) // E0/E1 steppers act in tandem as E0
#define E_STEPPERS 2
#define E_MANUAL 1
#elif HAS_SWITCHING_EXTRUDER // One stepper for every two EXTRUDERS
#if EXTRUDERS > 4
#define E_STEPPERS 3
#elif EXTRUDERS > 2
#define E_STEPPERS 2
#else
#define E_STEPPERS 1
#endif
#elif ENABLED(MIXING_EXTRUDER) // Multiple feeds are mixed proportionally
#define E_STEPPERS MIXING_STEPPERS
#define E_MANUAL 1
#if MIXING_STEPPERS == 2
#define HAS_DUAL_MIXING 1
#endif
#ifndef MIXING_VIRTUAL_TOOLS
#define MIXING_VIRTUAL_TOOLS 1
#endif
#elif ENABLED(SWITCHING_TOOLHEAD) // Toolchanger
#define E_STEPPERS EXTRUDERS
#define E_MANUAL EXTRUDERS
#elif HAS_PRUSA_MMU2 || HAS_PRUSA_MMU3 // Průša Multi-Material Unit v2/v3
#define E_STEPPERS 1
#define E_MANUAL 1
#endif
// Default E steppers / manual motion is one per extruder
#ifndef E_STEPPERS
#define E_STEPPERS EXTRUDERS
#endif
#ifndef E_MANUAL
#define E_MANUAL EXTRUDERS
#endif
// Number of hotends...
#if ANY(SINGLENOZZLE, MIXING_EXTRUDER) // Only one for singlenozzle or mixing extruder
#define HOTENDS 1
#elif HAS_SWITCHING_EXTRUDER && !HAS_SWITCHING_NOZZLE // One for each pair of abstract "extruders"
#define HOTENDS E_STEPPERS
#elif TEMP_SENSOR_0
#define HOTENDS EXTRUDERS // One per extruder if at least one heater exists
#else
#define HOTENDS 0 // A machine with no hotends at all can still extrude
#endif
// At least one hotend...
#if HOTENDS
#define HAS_HOTEND 1
#ifndef HOTEND_OVERSHOOT
#define HOTEND_OVERSHOOT 15
#endif
#else
#undef MPCTEMP
#undef PIDTEMP
#undef PREVENT_COLD_EXTRUSION
#undef THERMAL_PROTECTION_HOTENDS
#endif
// More than one hotend...
#if HOTENDS > 1
#define HAS_MULTI_HOTEND 1
#define HAS_HOTEND_OFFSET 1
#ifndef HOTEND_OFFSET_X
#define HOTEND_OFFSET_X { 0 } // X offsets for each extruder
#endif
#ifndef HOTEND_OFFSET_Y
#define HOTEND_OFFSET_Y { 0 } // Y offsets for each extruder
#endif
#ifndef HOTEND_OFFSET_Z
#define HOTEND_OFFSET_Z { 0 } // Z offsets for each extruder
#endif
#else
#undef HOTEND_OFFSET_X
#undef HOTEND_OFFSET_Y
#undef HOTEND_OFFSET_Z
#endif

664
Marlin/src/inc/Conditionals_etc.h Normal file
View file

@ -0,0 +1,664 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Conditionals_etc.h
* Conditionals that need to be set before Configuration_adv.h or pins.h
*/
#ifndef STRING_CONFIG_H_AUTHOR
#define STRING_CONFIG_H_AUTHOR "(anonymous)"
#endif
//
// Remove irrelevant Configuration.h settings
//
// Clean up unused temperature sensors and sub-options
#if !TEMP_SENSOR_0
#undef TEMP_SENSOR_0
#endif
#if !TEMP_SENSOR_1
#undef TEMP_SENSOR_1
#endif
#if !TEMP_SENSOR_2
#undef TEMP_SENSOR_2
#endif
#if !TEMP_SENSOR_3
#undef TEMP_SENSOR_3
#endif
#if !TEMP_SENSOR_4
#undef TEMP_SENSOR_4
#endif
#if !TEMP_SENSOR_5
#undef TEMP_SENSOR_5
#endif
#if !TEMP_SENSOR_6
#undef TEMP_SENSOR_6
#endif
#if !TEMP_SENSOR_7
#undef TEMP_SENSOR_7
#endif
#if !TEMP_SENSOR_BED
#undef TEMP_SENSOR_BED
#undef THERMAL_PROTECTION_BED
#undef MAX_BED_POWER
#endif
#if !TEMP_SENSOR_CHAMBER
#undef TEMP_SENSOR_CHAMBER
#undef THERMAL_PROTECTION_CHAMBER
#undef CHAMBER_AUTO_FAN_PIN
#undef MAX_CHAMBER_POWER
#endif
#if !TEMP_SENSOR_COOLER
#undef TEMP_SENSOR_COOLER
#undef THERMAL_PROTECTION_COOLER
#undef COOLER_AUTO_FAN_PIN
#endif
#if !TEMP_SENSOR_PROBE
#undef TEMP_SENSOR_PROBE
#endif
#if !TEMP_SENSOR_REDUNDANT
#undef TEMP_SENSOR_REDUNDANT
#endif
#if !TEMP_SENSOR_BOARD
#undef TEMP_SENSOR_BOARD
#endif
#if !TEMP_SENSOR_SOC
#undef TEMP_SENSOR_SOC
#endif
#if !SOFT_PWM_SCALE
#undef SOFT_PWM_SCALE
#endif
/**
* Disable unused SINGLENOZZLE sub-options
*/
#if DISABLED(SINGLENOZZLE)
#undef SINGLENOZZLE_STANDBY_TEMP
#endif
#if !ALL(HAS_FAN, SINGLENOZZLE)
#undef SINGLENOZZLE_STANDBY_FAN
#endif
// No inactive extruders with SWITCHING_NOZZLE or Průša MMU1 or just 1 E stepper exists
#if HAS_SWITCHING_NOZZLE || HAS_PRUSA_MMU1 || E_STEPPERS < 2
#undef DISABLE_OTHER_EXTRUDERS
#endif
// Switching extruder has its own servo?
#if ENABLED(SWITCHING_EXTRUDER) && (!HAS_SWITCHING_NOZZLE || SWITCHING_EXTRUDER_SERVO_NR != SWITCHING_NOZZLE_SERVO_NR)
#define DO_SWITCH_EXTRUDER 1
#endif
/**
* The BLTouch Probe emulates a servo probe
* and uses "special" angles for its state.
*/
#if ENABLED(BLTOUCH) && !defined(Z_PROBE_SERVO_NR)
#define Z_PROBE_SERVO_NR 0
#endif
/**
* Set a flag for a servo probe (or BLTouch)
*/
#ifdef Z_PROBE_SERVO_NR
#define HAS_Z_SERVO_PROBE 1
#endif
#if ANY(HAS_Z_SERVO_PROBE, SWITCHING_EXTRUDER, SWITCHING_NOZZLE)
#define HAS_SERVO_ANGLES 1
#endif
#if !HAS_SERVO_ANGLES
#undef EDITABLE_SERVO_ANGLES
#endif
/**
* Set flags for any form of bed probe
*/
#if ANY(TOUCH_MI_PROBE, Z_PROBE_ALLEN_KEY, HAS_Z_SERVO_PROBE, SOLENOID_PROBE, Z_PROBE_SLED, RACK_AND_PINION_PROBE, SENSORLESS_PROBING, MAGLEV4, MAG_MOUNTED_PROBE, BIQU_MICROPROBE_V1, BIQU_MICROPROBE_V2)
#define HAS_STOWABLE_PROBE 1
#endif
#if ANY(HAS_STOWABLE_PROBE, FIX_MOUNTED_PROBE, BD_SENSOR, NOZZLE_AS_PROBE)
#define HAS_BED_PROBE 1
#endif
// Probing tool change
#if !HAS_MULTI_EXTRUDER
#undef PROBING_TOOL
#endif
#if HAS_BED_PROBE && defined(PROBING_TOOL)
#define DO_TOOLCHANGE_FOR_PROBING 1
#endif
/**
* Fill in undefined Filament Sensor options
*/
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#if NUM_RUNOUT_SENSORS >= 1
#ifndef FIL_RUNOUT1_STATE
#define FIL_RUNOUT1_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_RUNOUT1_PULLUP
#define FIL_RUNOUT1_PULLUP FIL_RUNOUT_PULLUP
#endif
#ifndef FIL_RUNOUT1_PULLDOWN
#define FIL_RUNOUT1_PULLDOWN FIL_RUNOUT_PULLDOWN
#endif
#endif
#if NUM_RUNOUT_SENSORS >= 2
#ifndef FIL_RUNOUT2_STATE
#define FIL_RUNOUT2_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_RUNOUT2_PULLUP
#define FIL_RUNOUT2_PULLUP FIL_RUNOUT_PULLUP
#endif
#ifndef FIL_RUNOUT2_PULLDOWN
#define FIL_RUNOUT2_PULLDOWN FIL_RUNOUT_PULLDOWN
#endif
#endif
#if NUM_RUNOUT_SENSORS >= 3
#ifndef FIL_RUNOUT3_STATE
#define FIL_RUNOUT3_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_RUNOUT3_PULLUP
#define FIL_RUNOUT3_PULLUP FIL_RUNOUT_PULLUP
#endif
#ifndef FIL_RUNOUT3_PULLDOWN
#define FIL_RUNOUT3_PULLDOWN FIL_RUNOUT_PULLDOWN
#endif
#endif
#if NUM_RUNOUT_SENSORS >= 4
#ifndef FIL_RUNOUT4_STATE
#define FIL_RUNOUT4_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_RUNOUT4_PULLUP
#define FIL_RUNOUT4_PULLUP FIL_RUNOUT_PULLUP
#endif
#ifndef FIL_RUNOUT4_PULLDOWN
#define FIL_RUNOUT4_PULLDOWN FIL_RUNOUT_PULLDOWN
#endif
#endif
#if NUM_RUNOUT_SENSORS >= 5
#ifndef FIL_RUNOUT5_STATE
#define FIL_RUNOUT5_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_RUNOUT5_PULLUP
#define FIL_RUNOUT5_PULLUP FIL_RUNOUT_PULLUP
#endif
#ifndef FIL_RUNOUT5_PULLDOWN
#define FIL_RUNOUT5_PULLDOWN FIL_RUNOUT_PULLDOWN
#endif
#endif
#if NUM_RUNOUT_SENSORS >= 6
#ifndef FIL_RUNOUT6_STATE
#define FIL_RUNOUT6_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_RUNOUT6_PULLUP
#define FIL_RUNOUT6_PULLUP FIL_RUNOUT_PULLUP
#endif
#ifndef FIL_RUNOUT6_PULLDOWN
#define FIL_RUNOUT6_PULLDOWN FIL_RUNOUT_PULLDOWN
#endif
#endif
#if NUM_RUNOUT_SENSORS >= 7
#ifndef FIL_RUNOUT7_STATE
#define FIL_RUNOUT7_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_RUNOUT7_PULLUP
#define FIL_RUNOUT7_PULLUP FIL_RUNOUT_PULLUP
#endif
#ifndef FIL_RUNOUT7_PULLDOWN
#define FIL_RUNOUT7_PULLDOWN FIL_RUNOUT_PULLDOWN
#endif
#endif
#if NUM_RUNOUT_SENSORS >= 8
#ifndef FIL_RUNOUT8_STATE
#define FIL_RUNOUT8_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_RUNOUT8_PULLUP
#define FIL_RUNOUT8_PULLUP FIL_RUNOUT_PULLUP
#endif
#ifndef FIL_RUNOUT8_PULLDOWN
#define FIL_RUNOUT8_PULLDOWN FIL_RUNOUT_PULLDOWN
#endif
#endif
#endif // FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#if NUM_MOTION_SENSORS >= 1
#ifndef FIL_MOTION1_STATE
#define FIL_MOTION1_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_MOTION1_PULLUP
#define FIL_MOTION1_PULLUP FIL_RUNOUT_PULLUP
#endif
#ifndef FIL_MOTION1_PULLDOWN
#define FIL_MOTION1_PULLDOWN FIL_RUNOUT_PULLDOWN
#endif
#endif
#if NUM_MOTION_SENSORS >= 2
#ifndef FIL_MOTION2_STATE
#define FIL_MOTION2_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_MOTION2_PULLUP
#define FIL_MOTION2_PULLUP FIL_RUNOUT_PULLUP
#endif
#ifndef FIL_MOTION2_PULLDOWN
#define FIL_MOTION2_PULLDOWN FIL_RUNOUT_PULLDOWN
#endif
#endif
#if NUM_MOTION_SENSORS >= 3
#ifndef FIL_MOTION3_STATE
#define FIL_MOTION3_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_MOTION3_PULLUP
#define FIL_MOTION3_PULLUP FIL_RUNOUT_PULLUP
#endif
#ifndef FIL_MOTION3_PULLDOWN
#define FIL_MOTION3_PULLDOWN FIL_RUNOUT_PULLDOWN
#endif
#endif
#if NUM_MOTION_SENSORS >= 4
#ifndef FIL_MOTION4_STATE
#define FIL_MOTION4_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_MOTION4_PULLUP
#define FIL_MOTION4_PULLUP FIL_RUNOUT_PULLUP
#endif
#ifndef FIL_MOTION4_PULLDOWN
#define FIL_MOTION4_PULLDOWN FIL_RUNOUT_PULLDOWN
#endif
#endif
#if NUM_MOTION_SENSORS >= 5
#ifndef FIL_MOTION5_STATE
#define FIL_MOTION5_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_MOTION5_PULLUP
#define FIL_MOTION5_PULLUP FIL_RUNOUT_PULLUP
#endif
#ifndef FIL_MOTION5_PULLDOWN
#define FIL_MOTION5_PULLDOWN FIL_RUNOUT_PULLDOWN
#endif
#endif
#if NUM_MOTION_SENSORS >= 6
#ifndef FIL_MOTION6_STATE
#define FIL_MOTION6_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_MOTION6_PULLUP
#define FIL_MOTION6_PULLUP FIL_RUNOUT_PULLUP
#endif
#ifndef FIL_MOTION6_PULLDOWN
#define FIL_MOTION6_PULLDOWN FIL_RUNOUT_PULLDOWN
#endif
#endif
#if NUM_MOTION_SENSORS >= 7
#ifndef FIL_MOTION7_STATE
#define FIL_MOTION7_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_MOTION7_PULLUP
#define FIL_MOTION7_PULLUP FIL_RUNOUT_PULLUP
#endif
#ifndef FIL_MOTION7_PULLDOWN
#define FIL_MOTION7_PULLDOWN FIL_RUNOUT_PULLDOWN
#endif
#endif
#if NUM_MOTION_SENSORS >= 8
#ifndef FIL_MOTION8_STATE
#define FIL_MOTION8_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_MOTION8_PULLUP
#define FIL_MOTION8_PULLUP FIL_RUNOUT_PULLUP
#endif
#ifndef FIL_MOTION8_PULLDOWN
#define FILMOTION8_PULLDOWN FIL_RUNOUT_PULLDOWN
#endif
#endif
#endif // FILAMENT_SWITCH_AND_MOTION
// Homing to Min or Max
#if HAS_X_AXIS
#if X_HOME_DIR > 0
#define X_HOME_TO_MAX 1
#elif X_HOME_DIR < 0
#define X_HOME_TO_MIN 1
#endif
#endif
#if HAS_Y_AXIS
#if Y_HOME_DIR > 0
#define Y_HOME_TO_MAX 1
#elif Y_HOME_DIR < 0
#define Y_HOME_TO_MIN 1
#endif
#endif
#if HAS_Z_AXIS
#if Z_HOME_DIR > 0
#define Z_HOME_TO_MAX 1
#elif Z_HOME_DIR < 0
#define Z_HOME_TO_MIN 1
#endif
#endif
#if HAS_I_AXIS
#if I_HOME_DIR > 0
#define I_HOME_TO_MAX 1
#elif I_HOME_DIR < 0
#define I_HOME_TO_MIN 1
#endif
#endif
#if HAS_J_AXIS
#if J_HOME_DIR > 0
#define J_HOME_TO_MAX 1
#elif J_HOME_DIR < 0
#define J_HOME_TO_MIN 1
#endif
#endif
#if HAS_K_AXIS
#if K_HOME_DIR > 0
#define K_HOME_TO_MAX 1
#elif K_HOME_DIR < 0
#define K_HOME_TO_MIN 1
#endif
#endif
#if HAS_U_AXIS
#if U_HOME_DIR > 0
#define U_HOME_TO_MAX 1
#elif U_HOME_DIR < 0
#define U_HOME_TO_MIN 1
#endif
#endif
#if HAS_V_AXIS
#if V_HOME_DIR > 0
#define V_HOME_TO_MAX 1
#elif V_HOME_DIR < 0
#define V_HOME_TO_MIN 1
#endif
#endif
#if HAS_W_AXIS
#if W_HOME_DIR > 0
#define W_HOME_TO_MAX 1
#elif W_HOME_DIR < 0
#define W_HOME_TO_MIN 1
#endif
#endif
/**
* Conditionals based on the type of Bed Probe
*/
#if HAS_BED_PROBE
#if ALL(DELTA, SENSORLESS_PROBING)
#define HAS_DELTA_SENSORLESS_PROBING 1
#else
#define HAS_REAL_BED_PROBE 1
#endif
#if HAS_REAL_BED_PROBE && NONE(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, Z_SPI_SENSORLESS)
#define NEED_Z_MIN_PROBE_PIN 1
#endif
#if Z_HOME_TO_MIN && (!NEED_Z_MIN_PROBE_PIN || ENABLED(USE_PROBE_FOR_Z_HOMING))
#define HOMING_Z_WITH_PROBE 1
#endif
#if DISABLED(NOZZLE_AS_PROBE)
#define HAS_PROBE_XY_OFFSET 1
#endif
#if ANY(Z_PROBE_ALLEN_KEY, MAG_MOUNTED_PROBE)
#define PROBE_TRIGGERED_WHEN_STOWED_TEST 1 // Extra test for Allen Key Probe
#endif
#ifndef Z_PROBE_ERROR_TOLERANCE
#define Z_PROBE_ERROR_TOLERANCE Z_CLEARANCE_MULTI_PROBE
#endif
#if MULTIPLE_PROBING > 1
#if EXTRA_PROBING > 0
#define TOTAL_PROBING (MULTIPLE_PROBING + EXTRA_PROBING)
#else
#define TOTAL_PROBING MULTIPLE_PROBING
#endif
#endif
#else
// Clear probe pin settings when no probe is selected
#undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
#undef USE_PROBE_FOR_Z_HOMING
#undef Z_MIN_PROBE_REPEATABILITY_TEST
#undef HOMING_Z_WITH_PROBE
#undef Z_CLEARANCE_MULTI_PROBE
#undef Z_PROBE_ERROR_TOLERANCE
#undef Z_AFTER_PROBING
#undef Z_PROBE_LOW_POINT
#undef MULTIPLE_PROBING
#undef EXTRA_PROBING
#undef PROBE_OFFSET_ZMIN
#undef PROBE_OFFSET_ZMAX
#undef PAUSE_BEFORE_DEPLOY_STOW
#undef PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED
#undef PROBING_HEATERS_OFF
#undef WAIT_FOR_BED_HEATER
#undef WAIT_FOR_HOTEND
#undef PROBING_FANS_OFF
#undef PROBING_ESTEPPERS_OFF
#undef PROBING_STEPPERS_OFF
#undef DELAY_BEFORE_PROBING
#undef PREHEAT_BEFORE_PROBING
#undef PROBING_NOZZLE_TEMP
#undef PROBING_BED_TEMP
#undef NOZZLE_TO_PROBE_OFFSET
#endif
#if ENABLED(BELTPRINTER) && !defined(HOME_Y_BEFORE_X)
#define HOME_Y_BEFORE_X
#endif
#if Z_HOME_TO_MAX && DISABLED(Z_SAFE_HOMING)
#define HOME_Z_FIRST // If homing away from BED do Z first
#endif
/**
* Conditionals based on the type of Bed Leveling
*/
#if ENABLED(AUTO_BED_LEVELING_UBL)
#undef LCD_BED_LEVELING
#if ANY(DELTA, SEGMENT_LEVELED_MOVES)
#define UBL_SEGMENTED 1
#endif
#endif
#if ANY(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT)
#define ABL_PLANAR 1
#endif
#if ANY(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
#define ABL_USES_GRID 1
#endif
#if ANY(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_3POINT)
#define HAS_ABL_NOT_UBL 1
#endif
#if ANY(AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL, MESH_BED_LEVELING)
#define HAS_MESH 1
#endif
#if ANY(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_3POINT)
#define NEEDS_THREE_PROBE_POINTS 1
#endif
#if ANY(HAS_ABL_NOT_UBL, AUTO_BED_LEVELING_UBL)
#define HAS_ABL_OR_UBL 1
#if DISABLED(PROBE_MANUALLY)
#define HAS_AUTOLEVEL 1
#endif
#endif
#if ANY(HAS_ABL_OR_UBL, MESH_BED_LEVELING)
#define HAS_LEVELING 1
#if DISABLED(AUTO_BED_LEVELING_UBL)
#define PLANNER_LEVELING 1
#endif
#endif
#if !HAS_LEVELING
#undef RESTORE_LEVELING_AFTER_G28
#undef ENABLE_LEVELING_AFTER_G28
#undef G29_RETRY_AND_RECOVER
#endif
#if !HAS_LEVELING || ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
#undef PROBE_MANUALLY
#endif
#if ANY(HAS_BED_PROBE, PROBE_MANUALLY, MESH_BED_LEVELING)
#define PROBE_SELECTED 1
#endif
#if !HAS_MESH
#undef MESH_INSET
#endif
#if NONE(PROBE_SELECTED, AUTO_BED_LEVELING_UBL)
#undef Z_CLEARANCE_BETWEEN_PROBES
#endif
#if NONE(PROBE_SELECTED, DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU)
#undef PROBING_MARGIN
#undef PROBING_MARGIN_LEFT
#undef PROBING_MARGIN_RIGHT
#undef PROBING_MARGIN_FRONT
#undef PROBING_MARGIN_BACK
#undef XY_PROBE_FEEDRATE
#endif
#if !(ANY(HAS_BED_PROBE, HAS_LEVELING) || ALL(AUTO_BED_LEVELING_UBL, HAS_MARLINUI_MENU))
#undef Z_CLEARANCE_DEPLOY_PROBE
#endif
#if !(ANY(HAS_BED_PROBE, BACKLASH_GCODE) || (ENABLED(EXTENSIBLE_UI) && ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)))
#undef Z_PROBE_FEEDRATE_FAST
#undef Z_PROBE_FEEDRATE_SLOW
#endif
/**
* Z_CLEARANCE_FOR_HOMING
*/
#ifndef Z_CLEARANCE_FOR_HOMING
#ifdef Z_CLEARANCE_BETWEEN_PROBES
#define Z_CLEARANCE_FOR_HOMING Z_CLEARANCE_BETWEEN_PROBES
#else
#define Z_CLEARANCE_FOR_HOMING 5
#endif
#endif
/**
* Z_CLEARANCE_BETWEEN_PROBES
*/
#if PROBE_SELECTED || (HAS_MARLINUI_MENU && ANY(DELTA_CALIBRATION_MENU, DELTA_AUTO_CALIBRATION))
#ifndef Z_CLEARANCE_BETWEEN_PROBES
#define Z_CLEARANCE_BETWEEN_PROBES Z_CLEARANCE_FOR_HOMING
#endif
#endif
/**
* Z_CLEARANCE_BETWEEN_MANUAL_PROBES / Z_CLEARANCE_MULTI_PROBE
*/
#if PROBE_SELECTED
#if ANY(MESH_BED_LEVELING, PROBE_MANUALLY)
#if Z_CLEARANCE_BETWEEN_PROBES > Z_CLEARANCE_FOR_HOMING
#define Z_CLEARANCE_BETWEEN_MANUAL_PROBES Z_CLEARANCE_BETWEEN_PROBES
#else
#define Z_CLEARANCE_BETWEEN_MANUAL_PROBES Z_CLEARANCE_FOR_HOMING
#endif
#endif
#ifndef Z_CLEARANCE_MULTI_PROBE
#ifdef Z_CLEARANCE_BETWEEN_PROBES
#define Z_CLEARANCE_MULTI_PROBE Z_CLEARANCE_BETWEEN_PROBES
#else
#define Z_CLEARANCE_MULTI_PROBE 5
#endif
#endif
#endif
#if TOTAL_PROBING < 2
#undef Z_CLEARANCE_MULTI_PROBE
#endif
#if DISABLED(ENABLE_LEVELING_FADE_HEIGHT)
#undef DEFAULT_LEVELING_FADE_HEIGHT
#endif
#ifdef GRID_MAX_POINTS_X
#define GRID_MAX_POINTS ((GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y))
#define GRID_LOOP(A,B) for (uint8_t A = 0; A < GRID_MAX_POINTS_X; ++A) for (uint8_t B = 0; B < GRID_MAX_POINTS_Y; ++B)
#endif
/**
* CoreXY, CoreXZ, and CoreYZ - and their reverse
*/
#if ANY(COREXY, COREYX)
#define CORE_IS_XY 1
#endif
#if ANY(COREXZ, COREZX)
#define CORE_IS_XZ 1
#endif
#if ANY(COREYZ, COREZY)
#define CORE_IS_YZ 1
#endif
#if CORE_IS_XY || CORE_IS_XZ || CORE_IS_YZ
#define IS_CORE 1
#if CORE_IS_XY
#define CORE_AXIS_1 A_AXIS
#define CORE_AXIS_2 B_AXIS
#define NORMAL_AXIS Z_AXIS
#elif CORE_IS_XZ
#define CORE_AXIS_1 A_AXIS
#define NORMAL_AXIS Y_AXIS
#define CORE_AXIS_2 C_AXIS
#elif CORE_IS_YZ
#define NORMAL_AXIS X_AXIS
#define CORE_AXIS_1 B_AXIS
#define CORE_AXIS_2 C_AXIS
#endif
#define CORESIGN(n) (ANY(COREYX, COREZX, COREZY) ? (-(n)) : (n))
#elif ANY(MARKFORGED_XY, MARKFORGED_YX)
// Markforged kinematics
#define CORE_AXIS_1 A_AXIS
#define CORE_AXIS_2 B_AXIS
#define NORMAL_AXIS Z_AXIS
#endif
#if ANY(MORGAN_SCARA, MP_SCARA, AXEL_TPARA)
#define IS_SCARA 1
#define IS_KINEMATIC 1
#elif ANY(DELTA, POLARGRAPH, POLAR)
#define IS_KINEMATIC 1
#else
#define IS_CARTESIAN 1
#if !IS_CORE
#define IS_FULL_CARTESIAN 1
#endif
#endif
#if DISABLED(DELTA)
#undef DELTA_HOME_TO_SAFE_ZONE
#endif
/**
* This setting is also used by M109 when trying to calculate
* a ballpark safe margin to prevent wait-forever situation.
*/
#ifndef EXTRUDE_MINTEMP
#define EXTRUDE_MINTEMP 170
#endif
#if ANY(PID_DEBUG, PID_BED_DEBUG, PID_CHAMBER_DEBUG)
#define HAS_PID_DEBUG 1
#endif
#if ALL(SPI_FLASH, HAS_MEDIA, MARLIN_DEV_MODE)
#define SPI_FLASH_BACKUP 1
#endif

11
Marlin/src/inc/Conditionals_post.h
View file

@ -2643,10 +2643,6 @@
#endif
// Thermal protection
#if !HAS_HEATED_BED
#undef THERMAL_PROTECTION_BED
#undef THERMAL_PROTECTION_BED_PERIOD
#endif
#if ENABLED(THERMAL_PROTECTION_HOTENDS) && WATCH_TEMP_PERIOD > 0
#define WATCH_HOTENDS 1
#endif
@ -3194,8 +3190,13 @@
/**
* Heater, Fan, and Probe interactions
*/
#if !HAS_FAN
#if !ALL(HAS_HOTEND, HAS_FAN)
#undef ADAPTIVE_FAN_SLOWING
#endif
#if DISABLED(ADAPTIVE_FAN_SLOWING)
#undef REPORT_ADAPTIVE_FAN_SLOWING
#endif
#if DISABLED(ADAPTIVE_FAN_SLOWING) || NONE(MPCTEMP, PIDTEMP)
#undef TEMP_TUNING_MAINTAIN_FAN
#endif
#if !ALL(HAS_BED_PROBE, HAS_FAN)

2
Marlin/src/inc/MarlinConfigPre.h
View file

@ -55,7 +55,9 @@
#include "Version.h"
#include "Conditionals_axes.h"
#include "Conditionals_LCD.h"
#include "Conditionals_etc.h"
#ifndef __MARLIN_DEPS__
#include HAL_PATH(.., inc/Conditionals_LCD.h)