From 8b12371e45356aadf175e02e80c87a3df47ea60c Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Fri, 15 Dec 2017 15:17:52 -0600
Subject: [PATCH] Change some hex case

---
 Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp        | 10 +++----
 .../HAL/HAL_TEENSY35_36/HAL_spi_Teensy.cpp    |  6 ++--
 Marlin/src/sd/Sd2Card.cpp                     |  8 ++---
 Marlin/src/sd/Sd2Card.h                       | 30 +++++++++----------
 Marlin/src/sd/SdBaseFile.cpp                  |  8 ++---
 Marlin/src/sd/SdVolume.cpp                    |  2 +-
 6 files changed, 32 insertions(+), 32 deletions(-)

diff --git a/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp b/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp
index 840afeeec1..59f40a3655 100644
--- a/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp
+++ b/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp
@@ -97,7 +97,7 @@ void spiBegin (void) {
   //------------------------------------------------------------------------------
   /** SPI receive a byte */
   uint8_t spiRec(void) {
-    SPDR = 0XFF;
+    SPDR = 0xFF;
     while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
     return SPDR;
   }
@@ -105,11 +105,11 @@ void spiBegin (void) {
   /** SPI read data  */
   void spiRead(uint8_t* buf, uint16_t nbyte) {
     if (nbyte-- == 0) return;
-    SPDR = 0XFF;
+    SPDR = 0xFF;
     for (uint16_t i = 0; i < nbyte; i++) {
       while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
       buf[i] = SPDR;
-      SPDR = 0XFF;
+      SPDR = 0xFF;
     }
     while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
     buf[nbyte] = SPDR;
@@ -150,7 +150,7 @@ void spiBegin (void) {
     uint8_t data = 0;
     // no interrupts during byte receive - about 8 us
     cli();
-    // output pin high - like sending 0XFF
+    // output pin high - like sending 0xFF
     WRITE(MOSI_PIN, HIGH);
 
     for (uint8_t i = 0; i < 8; i++) {
@@ -184,7 +184,7 @@ void spiBegin (void) {
     for (uint8_t i = 0; i < 8; i++) {
       WRITE(SCK_PIN, LOW);
 
-      WRITE(MOSI_PIN, data & 0X80);
+      WRITE(MOSI_PIN, data & 0x80);
 
       data <<= 1;
 
diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_spi_Teensy.cpp b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_spi_Teensy.cpp
index 17239df47d..df6e0265f4 100644
--- a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_spi_Teensy.cpp
+++ b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_spi_Teensy.cpp
@@ -56,7 +56,7 @@ uint8_t spiRec(void) {
   uint8_t returnByte = SPI.transfer(0xFF);
   SPI.endTransaction();
   return returnByte;
-//  SPDR = 0XFF;
+//  SPDR = 0xFF;
 //  while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
 //  return SPDR;
 }
@@ -67,11 +67,11 @@ void spiRead(uint8_t* buf, uint16_t nbyte) {
   SPI.transfer(buf, nbyte);
   SPI.endTransaction();
 //if (nbyte-- == 0) return;
-//  SPDR = 0XFF;
+//  SPDR = 0xFF;
 //for (uint16_t i = 0; i < nbyte; i++) {
 //  while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
 //  buf[i] = SPDR;
-//  SPDR = 0XFF;
+//  SPDR = 0xFF;
 //}
 //while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
 //buf[nbyte] = SPDR;
diff --git a/Marlin/src/sd/Sd2Card.cpp b/Marlin/src/sd/Sd2Card.cpp
index 4955e9949a..f746a22773 100644
--- a/Marlin/src/sd/Sd2Card.cpp
+++ b/Marlin/src/sd/Sd2Card.cpp
@@ -342,7 +342,7 @@ bool Sd2Card::readData(uint8_t* dst) {
 bool Sd2Card::readData(uint8_t* dst, uint16_t count) {
   // wait for start block token
   uint16_t t0 = millis();
-  while ((status_ = spiRec()) == 0XFF) {
+  while ((status_ = spiRec()) == 0xFF) {
     if (((uint16_t)millis() - t0) > SD_READ_TIMEOUT) {
       error(SD_CARD_ERROR_READ_TIMEOUT);
       goto FAIL;
@@ -372,12 +372,12 @@ bool Sd2Card::readData(uint8_t* dst, uint16_t count) {
 #endif
   chipSelectHigh();
   // Send an additional dummy byte, required by Toshiba Flash Air SD Card
-  spiSend(0XFF);
+  spiSend(0xFF);
   return true;
   FAIL:
   chipSelectHigh();
   // Send an additional dummy byte, required by Toshiba Flash Air SD Card
-  spiSend(0XFF);
+  spiSend(0xFF);
   return false;
 }
 
@@ -453,7 +453,7 @@ bool Sd2Card::setSckRate(uint8_t sckRateID) {
 // wait for card to go not busy
 bool Sd2Card::waitNotBusy(uint16_t timeoutMillis) {
   uint16_t t0 = millis();
-  while (spiRec() != 0XFF)
+  while (spiRec() != 0xFF)
     if (((uint16_t)millis() - t0) >= timeoutMillis) return false;
 
   return true;
diff --git a/Marlin/src/sd/Sd2Card.h b/Marlin/src/sd/Sd2Card.h
index 0f596ce4c7..6187db7016 100644
--- a/Marlin/src/sd/Sd2Card.h
+++ b/Marlin/src/sd/Sd2Card.h
@@ -46,21 +46,21 @@ uint16_t const SD_INIT_TIMEOUT = 2000,    // init timeout ms
                SD_WRITE_TIMEOUT = 600;    // write time out ms
 
 // SD card errors
-uint8_t const SD_CARD_ERROR_CMD0 = 0X1,                 // timeout error for command CMD0 (initialize card in SPI mode)
-              SD_CARD_ERROR_CMD8 = 0X2,                 // CMD8 was not accepted - not a valid SD card
-              SD_CARD_ERROR_CMD12 = 0X3,                // card returned an error response for CMD12 (write stop)
-              SD_CARD_ERROR_CMD17 = 0X4,                // card returned an error response for CMD17 (read block)
-              SD_CARD_ERROR_CMD18 = 0X5,                // card returned an error response for CMD18 (read multiple block)
-              SD_CARD_ERROR_CMD24 = 0X6,                // card returned an error response for CMD24 (write block)
-              SD_CARD_ERROR_CMD25 = 0X7,                // WRITE_MULTIPLE_BLOCKS command failed
-              SD_CARD_ERROR_CMD58 = 0X8,                // card returned an error response for CMD58 (read OCR)
-              SD_CARD_ERROR_ACMD23 = 0X9,               // SET_WR_BLK_ERASE_COUNT failed
-              SD_CARD_ERROR_ACMD41 = 0XA,               // ACMD41 initialization process timeout
-              SD_CARD_ERROR_BAD_CSD = 0XB,              // card returned a bad CSR version field
-              SD_CARD_ERROR_ERASE = 0XC,                // erase block group command failed
-              SD_CARD_ERROR_ERASE_SINGLE_BLOCK = 0XD,   // card not capable of single block erase
-              SD_CARD_ERROR_ERASE_TIMEOUT = 0XE,        // Erase sequence timed out
-              SD_CARD_ERROR_READ = 0XF,                 // card returned an error token instead of read data
+uint8_t const SD_CARD_ERROR_CMD0 = 0x01,                // timeout error for command CMD0 (initialize card in SPI mode)
+              SD_CARD_ERROR_CMD8 = 0x02,                // CMD8 was not accepted - not a valid SD card
+              SD_CARD_ERROR_CMD12 = 0x03,               // card returned an error response for CMD12 (write stop)
+              SD_CARD_ERROR_CMD17 = 0x04,               // card returned an error response for CMD17 (read block)
+              SD_CARD_ERROR_CMD18 = 0x05,               // card returned an error response for CMD18 (read multiple block)
+              SD_CARD_ERROR_CMD24 = 0x06,               // card returned an error response for CMD24 (write block)
+              SD_CARD_ERROR_CMD25 = 0x07,               // WRITE_MULTIPLE_BLOCKS command failed
+              SD_CARD_ERROR_CMD58 = 0x08,               // card returned an error response for CMD58 (read OCR)
+              SD_CARD_ERROR_ACMD23 = 0x09,              // SET_WR_BLK_ERASE_COUNT failed
+              SD_CARD_ERROR_ACMD41 = 0x0A,              // ACMD41 initialization process timeout
+              SD_CARD_ERROR_BAD_CSD = 0x0B,             // card returned a bad CSR version field
+              SD_CARD_ERROR_ERASE = 0x0C,               // erase block group command failed
+              SD_CARD_ERROR_ERASE_SINGLE_BLOCK = 0x0D,  // card not capable of single block erase
+              SD_CARD_ERROR_ERASE_TIMEOUT = 0x0E,       // Erase sequence timed out
+              SD_CARD_ERROR_READ = 0x0F,                // card returned an error token instead of read data
               SD_CARD_ERROR_READ_REG = 0x10,            // read CID or CSD failed
               SD_CARD_ERROR_READ_TIMEOUT = 0x11,        // timeout while waiting for start of read data
               SD_CARD_ERROR_STOP_TRAN = 0x12,           // card did not accept STOP_TRAN_TOKEN
diff --git a/Marlin/src/sd/SdBaseFile.cpp b/Marlin/src/sd/SdBaseFile.cpp
index d9eb292e7b..b25a7f9f5c 100644
--- a/Marlin/src/sd/SdBaseFile.cpp
+++ b/Marlin/src/sd/SdBaseFile.cpp
@@ -601,7 +601,7 @@ bool SdBaseFile::open(SdBaseFile* dirFile, const uint8_t dname[11], uint8_t ofla
   // search for file
 
   while (dirFile->curPosition_ < dirFile->fileSize_) {
-    index = 0XF & (dirFile->curPosition_ >> 5);
+    index = 0xF & (dirFile->curPosition_ >> 5);
     p = dirFile->readDirCache();
     if (!p) return false;
 
@@ -705,7 +705,7 @@ bool SdBaseFile::open(SdBaseFile* dirFile, uint16_t index, uint8_t oflag) {
     return false;
   }
   // open cached entry
-  return openCachedEntry(index & 0XF, oflag);
+  return openCachedEntry(index & 0xF, oflag);
 }
 
 // open a cached directory entry. Assumes vol_ is initialized
@@ -775,7 +775,7 @@ bool SdBaseFile::openNext(SdBaseFile* dirFile, uint8_t oflag) {
   vol_ = dirFile->vol_;
 
   while (1) {
-    index = 0XF & (dirFile->curPosition_ >> 5);
+    index = 0xF & (dirFile->curPosition_ >> 5);
 
     // read entry into cache
     p = dirFile->readDirCache();
@@ -1100,7 +1100,7 @@ dir_t* SdBaseFile::readDirCache() {
   if (!isDir()) return 0;
 
   // index of entry in cache
-  i = (curPosition_ >> 5) & 0XF;
+  i = (curPosition_ >> 5) & 0xF;
 
   // use read to locate and cache block
   if (read() < 0) return 0;
diff --git a/Marlin/src/sd/SdVolume.cpp b/Marlin/src/sd/SdVolume.cpp
index f4d562bb2d..a872eb19d8 100644
--- a/Marlin/src/sd/SdVolume.cpp
+++ b/Marlin/src/sd/SdVolume.cpp
@@ -207,7 +207,7 @@ bool SdVolume::fatPut(uint32_t cluster, uint32_t value) {
     index &= 0x1FF;
     uint8_t tmp = value;
     if (cluster & 1) {
-      tmp = (cacheBuffer_.data[index] & 0XF) | tmp << 4;
+      tmp = (cacheBuffer_.data[index] & 0xF) | tmp << 4;
     }
     cacheBuffer_.data[index] = tmp;
     index++;