3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-26 21:36:21 +00:00
Code Issues Releases Wiki Activity

Improve M600 with timeout, wait for heatup.

Browse Source
This commit is contained in:
Roxy-3D 2017-01-21 16:10:57 -07:00 committed by Scott Lahteine
parent 58b8e0cae7
commit 8bf0b496b9
11 changed files with 212 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Marlin/Configuration_adv.h
View File

@ -721,12 +721,16 @@
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
// Short or zero length for printers without bowden where loading is not used
#define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
#define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend,
// 0 to disable for manual extrusion
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
// or until outcoming filament color is not clear for filament color change
#define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
#define FILAMENT_CHANGE_NOZZLE_TIMEOUT 45L // Turn off nozzle if user doesn't change filament within this time limit in seconds
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5L // Number of alert beeps before printer goes quiet
#define STEPPER_MOTORS_DONT_TIMEOUT_DURING_FILAMENT_CHANGE // Enable to make stepper motors hold position during filament change even if it
// takes longer than DEFAULT_STEPPER_DEACTIVE_TIME
#endif
/******************************************************************************\

95
Marlin/Marlin_main.cpp
View File

@ -7290,6 +7290,28 @@ inline void gcode_M503() {
#if ENABLED(FILAMENT_CHANGE_FEATURE)
millis_t next_buzz = 0;
unsigned long int runout_beep = 0;
void filament_change_beep() {
millis_t ms = millis();
if (ms >= next_buzz) {
if (runout_beep <= FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS ) { // Only beep as long as we are supposed to!
BUZZ(300, 2000);
next_buzz = ms + 2500; // Beep every 2.5s while waiting
runout_beep++;
}
else if (runout_beep > FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS &&
runout_beep <= (FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS + 5)) { // End with a burst of short beeps
BUZZ(200, 2000);
next_buzz = ms + 400; // Beep
runout_beep++;
}
}
}
bool busy_doing_M600 = false;
/**
* M600: Pause for filament change
*
@ -7310,6 +7332,8 @@ inline void gcode_M503() {
return;
}
busy_doing_M600 = true; // Stepper Motors can't timeout when this is set
// Show initial message and wait for synchronize steppers
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_INIT);
stepper.synchronize();
@ -7367,6 +7391,7 @@ inline void gcode_M503() {
stepper.synchronize();
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_UNLOAD);
idle();
// Unload filament
if (code_seen('L')) destination[E_AXIS] += code_value_axis_units(E_AXIS);
@ -7384,23 +7409,66 @@ inline void gcode_M503() {
disable_e3();
delay(100);
#if HAS_BUZZER
millis_t next_buzz = 0;
#endif
millis_t nozzle_timeout = millis() + FILAMENT_CHANGE_NOZZLE_TIMEOUT*1000L;
bool nozzle_timed_out = false;
float temps[4];
int iii;
// Wait for filament insert by user and press button
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_INSERT);
// LCD click or M108 will clear this
wait_for_user = true;
idle();
wait_for_user = true; // LCD click or M108 will clear this
next_buzz = 0;
runout_beep = 0;
for( iii=0; iii<HOTENDS; iii++) //Save nozzle temps
temps[iii] = thermalManager.target_temperature[iii];
while (wait_for_user) {
millis_t current_ms = millis();
if (nozzle_timed_out == true)
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_CLICK_TO_HEAT_NOZZLE);
#if HAS_BUZZER
millis_t ms = millis();
if (ms >= next_buzz) {
BUZZ(300, 2000);
next_buzz = ms + 2500; // Beep every 2.5s while waiting
filament_change_beep();
#endif //HAS_BUZZER
if (current_ms >= nozzle_timeout) {
if (nozzle_timed_out == false ) {
nozzle_timed_out = true; // if the nozzle time out happens, remember we turned off the nozzles.
for( iii=0; iii<HOTENDS; iii++) // turn off all the nozzles
thermalManager.setTargetHotend( 0.0 , iii );
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_CLICK_TO_HEAT_NOZZLE);
}
}
idle(true);
}
if (nozzle_timed_out == true ) { // Turn nozzles back on if we turned them off.
for( iii=0; iii<HOTENDS; iii++)
thermalManager.setTargetHotend( temps[iii] , iii );
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT);
}
KEEP_CHECKING_TEMPS:
idle();
for( iii=0; iii<HOTENDS; iii++){
if (abs(thermalManager.degHotend(iii)-temps[iii]) > 3 ) {
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT);
goto KEEP_CHECKING_TEMPS;
}
}
wait_for_user = true; // LCD click or M108 will clear this
next_buzz = 0;
runout_beep = 0;
while (wait_for_user) {
if (nozzle_timed_out == true)
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_INSERT);
else break;
#if HAS_BUZZER
filament_change_beep();
#endif
idle(true);
}
@ -7408,6 +7476,8 @@ inline void gcode_M503() {
// Show load message
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_LOAD);
idle();
// Load filament
if (code_seen('L')) destination[E_AXIS] -= code_value_axis_units(E_AXIS);
#if defined(FILAMENT_CHANGE_LOAD_LENGTH) && FILAMENT_CHANGE_LOAD_LENGTH > 0
@ -7459,6 +7529,7 @@ inline void gcode_M503() {
// Show status screen
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_STATUS);
busy_doing_M600 = false; // Allow Stepper Motors to be turned off during inactivity
}
#endif // FILAMENT_CHANGE_FEATURE
@ -10074,6 +10145,12 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
if (max_inactive_time && ELAPSED(ms, previous_cmd_ms + max_inactive_time)) kill(PSTR(MSG_KILLED));
#if ENABLED(FILAMENT_CHANGE_FEATURE)
#ifdef STEPPER_MOTORS_DONT_TIMEOUT_DURING_FILAMENT_CHANGE
if (busy_doing_M600 == false ) // We only allow the stepper motors to time out if
#endif // we are not in the middle of an M600 command.
#endif
if (stepper_inactive_time && ELAPSED(ms, previous_cmd_ms + stepper_inactive_time)
&& !ignore_stepper_queue && !planner.blocks_queued()) {
#if ENABLED(DISABLE_INACTIVE_X)

2
Marlin/dogm_font_data_ISO10646_1_tr.h
View File

@ -31,7 +31,7 @@
X Font ascent = 7 descent=-1
Max Font ascent = 8 descent=-1
*/
#include "U8glib.h"
#include <U8glib.h>
const u8g_fntpgm_uint8_t ISO10646_TR[2591] U8G_SECTION(".progmem.ISO10646_TR") = {
0,6,9,0,254,7,1,146,3,33,32,255,255,8,255,7,
255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128,

4
Marlin/endstops.cpp
View File

@ -217,6 +217,10 @@ void Endstops::M119() {
SERIAL_PROTOCOLPGM(MSG_Z_PROBE);
SERIAL_PROTOCOLLN(((READ(Z_MIN_PROBE_PIN)^Z_MIN_PROBE_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
SERIAL_PROTOCOLPGM(MSG_FILAMENT_RUNOUT_SENSOR);
SERIAL_PROTOCOLLN(((READ(FIL_RUNOUT_PIN)^FIL_RUNOUT_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
#endif
} // Endstops::M119
#if ENABLED(Z_DUAL_ENDSTOPS)

4
Marlin/enum.h
View File

@ -143,7 +143,9 @@ enum TempState {
FILAMENT_CHANGE_MESSAGE_EXTRUDE,
FILAMENT_CHANGE_MESSAGE_OPTION,
FILAMENT_CHANGE_MESSAGE_RESUME,
FILAMENT_CHANGE_MESSAGE_STATUS
FILAMENT_CHANGE_MESSAGE_STATUS,
FILAMENT_CHANGE_MESSAGE_CLICK_TO_HEAT_NOZZLE,
FILAMENT_CHANGE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT
};
#endif
#endif

1
Marlin/language.h
View File

@ -152,6 +152,7 @@
#define MSG_Z2_MIN "z2_min: "
#define MSG_Z2_MAX "z2_max: "
#define MSG_Z_PROBE "z_probe: "
#define MSG_FILAMENT_RUNOUT_SENSOR "filament_Runout_Sensor: "
#define MSG_ERR_MATERIAL_INDEX "M145 S<index> out of range (0-1)"
#define MSG_ERR_M355_NONE "No case light"
#define MSG_ERR_M421_PARAMETERS "M421 required parameters missing"

21
Marlin/language_en.h
View File

@ -33,6 +33,9 @@
#ifndef WELCOME_MSG
#define WELCOME_MSG MACHINE_NAME _UxGT(" ready.")
#endif
#ifndef MSG_BACK
#define MSG_BACK _UxGT("Back")
#endif
#ifndef MSG_SD_INSERTED
#define MSG_SD_INSERTED _UxGT("Card inserted")
#endif
@ -486,7 +489,6 @@
#ifndef MSG_DELTA_CALIBRATE_CENTER
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrate Center")
#endif
#ifndef MSG_INFO_MENU
#define MSG_INFO_MENU _UxGT("About Printer")
#endif
@ -583,6 +585,12 @@
#ifndef MSG_FILAMENT_CHANGE_OPTION_RESUME
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resume print")
#endif
#ifndef MSG_FILAMENT_CHANGE_MINTEMP
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Minimum Temp is ")
#endif
#ifndef MSG_FILAMENT_CHANGE_NOZZLE
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ")
#endif
//
// Filament Change screens show up to 3 lines on a 4-line display
@ -603,6 +611,14 @@
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("and press button")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("to continue...")
#endif
#ifndef MSG_FILAMENT_CHANGE_HEAT_1
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Press button to")
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("heat nozzle.")
#endif
#ifndef MSG_FILAMENT_CHANGE_HEATING_1
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating nozzle")
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Please wait...")
#endif
#ifndef MSG_FILAMENT_CHANGE_LOAD_1
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load")
@ -625,6 +641,9 @@
#ifndef MSG_FILAMENT_CHANGE_INSERT_1
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click")
#endif
#ifndef MSG_FILAMENT_CHANGE_HEATING_1
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating...")
#endif
#ifndef MSG_FILAMENT_CHANGE_LOAD_1
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...")
#endif

69
Marlin/ultralcd.cpp
View File

@ -54,6 +54,7 @@ char lcd_status_message[3 * (LCD_WIDTH) + 1] = WELCOME_MSG; // worst case is kan
#if ENABLED(DOGLCD)
#include "ultralcd_impl_DOGM.h"
#include <U8glib.h>
#else
#include "ultralcd_impl_HD44780.h"
#endif
@ -151,6 +152,7 @@ uint16_t max_display_update_time = 0;
void lcd_filament_change_unload_message();
void lcd_filament_change_insert_message();
void lcd_filament_change_load_message();
void lcd_filament_change_heat_nozzle();
void lcd_filament_change_extrude_message();
void lcd_filament_change_resume_message();
#endif
@ -948,6 +950,7 @@ void kill_screen(const char* lcd_msg) {
// Change filament
//
#if ENABLED(FILAMENT_CHANGE_FEATURE)
if (!thermalManager.tooColdToExtrude(active_extruder))
MENU_ITEM(function, MSG_FILAMENTCHANGE, lcd_enqueue_filament_change);
#endif
@ -1384,10 +1387,12 @@ KeepDrawing:
MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_material1_hotend0);
MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_material2_hotend0);
#endif
//
// Change filament
//
#if ENABLED(FILAMENT_CHANGE_FEATURE)
if (!thermalManager.tooColdToExtrude(active_extruder))
MENU_ITEM(function, MSG_FILAMENTCHANGE, lcd_enqueue_filament_change);
#endif
#endif
@ -2441,11 +2446,21 @@ KeepDrawing:
}
#endif // LCD_INFO_MENU
/**
*
* Filament Change Feature Screens
*
*/
#if ENABLED(FILAMENT_CHANGE_FEATURE)
void lcd_filament_change_toocold_menu() {
START_MENU();
STATIC_ITEM(MSG_HEATING_FAILED_LCD, true, true);
MENU_BACK(MSG_FILAMENTCHANGE);
STATIC_ITEM (MSG_FILAMENT_CHANGE_MINTEMP STRINGIFY(EXTRUDE_MINTEMP) ".", false, false);
MENU_BACK(MSG_BACK);
STATIC_ITEM (" ");
STATIC_ITEM(MSG_FILAMENT_CHANGE_NOZZLE, false, true);
lcd_implementation_hotend_status();
END_MENU();
}
@ -2478,6 +2493,8 @@ KeepDrawing:
#ifdef MSG_FILAMENT_CHANGE_INIT_3
STATIC_ITEM(MSG_FILAMENT_CHANGE_INIT_3);
#endif
STATIC_ITEM(MSG_FILAMENT_CHANGE_NOZZLE, false, true);
lcd_implementation_hotend_status();
END_SCREEN();
}
@ -2491,6 +2508,35 @@ KeepDrawing:
#ifdef MSG_FILAMENT_CHANGE_UNLOAD_3
STATIC_ITEM(MSG_FILAMENT_CHANGE_UNLOAD_3);
#endif
STATIC_ITEM (" ");
STATIC_ITEM(MSG_FILAMENT_CHANGE_NOZZLE, false, true);
lcd_implementation_hotend_status();
END_SCREEN();
}
void lcd_filament_change_wait_for_nozzles_to_heat() {
START_SCREEN();
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEADER, true, true);
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEATING_1);
#ifdef MSG_FILAMENT_CHANGE_HEATING_2
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEATING_2);
#endif
STATIC_ITEM(" ");
STATIC_ITEM(MSG_FILAMENT_CHANGE_NOZZLE, false, true);
lcd_implementation_hotend_status();
END_SCREEN();
}
void lcd_filament_change_heat_nozzle() {
START_SCREEN();
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEADER, true, true);
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEAT_1);
#ifdef MSG_FILAMENT_CHANGE_INSERT_2
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEAT_2);
#endif
STATIC_ITEM(" ");
STATIC_ITEM(MSG_FILAMENT_CHANGE_NOZZLE, false, true);
lcd_implementation_hotend_status();
END_SCREEN();
}
@ -2504,6 +2550,8 @@ KeepDrawing:
#ifdef MSG_FILAMENT_CHANGE_INSERT_3
STATIC_ITEM(MSG_FILAMENT_CHANGE_INSERT_3);
#endif
STATIC_ITEM(MSG_FILAMENT_CHANGE_NOZZLE, false, true);
lcd_implementation_hotend_status();
END_SCREEN();
}
@ -2517,6 +2565,9 @@ KeepDrawing:
#ifdef MSG_FILAMENT_CHANGE_LOAD_3
STATIC_ITEM(MSG_FILAMENT_CHANGE_LOAD_3);
#endif
STATIC_ITEM(" ");
STATIC_ITEM(MSG_FILAMENT_CHANGE_NOZZLE, false, true);
lcd_implementation_hotend_status();
END_SCREEN();
}
@ -2530,6 +2581,9 @@ KeepDrawing:
#ifdef MSG_FILAMENT_CHANGE_EXTRUDE_3
STATIC_ITEM(MSG_FILAMENT_CHANGE_EXTRUDE_3);
#endif
STATIC_ITEM(" ");
STATIC_ITEM(MSG_FILAMENT_CHANGE_NOZZLE, false, true);
lcd_implementation_hotend_status();
END_SCREEN();
}
@ -2550,20 +2604,33 @@ KeepDrawing:
switch (message) {
case FILAMENT_CHANGE_MESSAGE_INIT:
defer_return_to_status = true;
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
lcd_goto_screen(lcd_filament_change_init_message);
break;
case FILAMENT_CHANGE_MESSAGE_UNLOAD:
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
lcd_goto_screen(lcd_filament_change_unload_message);
break;
case FILAMENT_CHANGE_MESSAGE_INSERT:
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
lcd_goto_screen(lcd_filament_change_insert_message);
break;
case FILAMENT_CHANGE_MESSAGE_LOAD:
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
lcd_goto_screen(lcd_filament_change_load_message);
break;
case FILAMENT_CHANGE_MESSAGE_EXTRUDE:
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
lcd_goto_screen(lcd_filament_change_extrude_message);
break;
case FILAMENT_CHANGE_MESSAGE_CLICK_TO_HEAT_NOZZLE:
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
lcd_goto_screen(lcd_filament_change_heat_nozzle);
break;
case FILAMENT_CHANGE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT:
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
lcd_goto_screen(lcd_filament_change_wait_for_nozzles_to_heat);
break;
case FILAMENT_CHANGE_MESSAGE_OPTION:
filament_change_menu_response = FILAMENT_CHANGE_RESPONSE_WAIT_FOR;
lcd_goto_screen(lcd_filament_change_option_menu);

11
Marlin/ultralcd_impl_DOGM.h
View File

@ -379,6 +379,17 @@ FORCE_INLINE void _draw_axis_label(const AxisEnum axis, const char* const pstr,
//#define DOGM_SD_PERCENT
static void lcd_implementation_hotend_status() {
u8g.setPrintPos(58, 60);
lcd_print( (char) '0'+active_extruder );
lcd_print( ' ' );
lcd_print( ' ' );
lcd_print(itostr3(thermalManager.degHotend(active_extruder)));
lcd_print('/');
lcd_print(itostr3(thermalManager.degTargetHotend(active_extruder)));
}
static void lcd_implementation_status_screen() {
bool blink = lcd_blink();

8
Marlin/ultralcd_impl_HD44780.h
View File

@ -592,6 +592,14 @@ FORCE_INLINE void _draw_axis_label(const AxisEnum axis, const char* const pstr,
#endif // LCD_PROGRESS_BAR
static void lcd_implementation_hotend_status() {
lcd.setCursor(10,3);
lcd.print(LCD_STR_THERMOMETER[active_extruder]);
lcd.print(itostr3(thermalManager.degHotend(active_extruder)));
lcd.print('/');
lcd.print(itostr3(thermalManager.degTargetHotend(active_extruder)));
}
/**
Possible status screens:
16x2 |000/000 B000/000|

1
README.md
View File

@ -19,6 +19,7 @@ The latest Release Candidate lives in the ["RC" branch](https://github.com/Marli
## Recent Changes
- RCBugFix
- Fixed broken MBL
- M600 heater timeout option
- RC8 - 06 Dec 2016
- Major performance improvement for Graphical LCDs