diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 6ac399dafb3..6fc957b66af 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
index e577d29a4e5..c8aeff89ab0 100644
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
index 63ec678b465..ee126a1f9d2 100644
--- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
index 07781abc942..cafd49be6d5 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
index 9a0cf4b015c..c23f74d7001 100644
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
index 340bf6cc2b6..617f3fad6a1 100644
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
index 9a0cf4b015c..c23f74d7001 100644
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index 8117b8199c6..844fe78a1f4 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
index 7b7b24432d7..4a075610242 100755
--- a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index 2d349ded26d..40cd6f922d7 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
index 97b707820f1..86a6256acd6 100644
--- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
index f81f96c538f..aeca0dbb77c 100644
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
index 632b7d6a4a7..b7acef82161 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
index 7edba28542d..40f8b6d2f6a 100644
--- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index 42453f4343b..bb4e6032a6d 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index d1d0494b354..840452836f9 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
index 614f9e1616f..d33b7aa4ab4 100644
--- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
@@ -462,6 +462,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
index a9278096775..6645a3a9e62 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
index e09b4f1ca4a..7c51a7769c1 100644
--- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
@@ -486,6 +486,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
index 77911d8d8bf..e6a08cb4c56 100644
--- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h
index a3d6431def0..fe7ede7188c 100644
--- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h
+++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h
@@ -475,6 +475,9 @@
// Include a page of printer information in the LCD Main Menu
#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 18c76f5b525..981054b6f70 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -475,6 +475,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
index 5e1f51d35a0..15f69557735 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -475,6 +475,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index 5e1f51d35a0..15f69557735 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -475,6 +475,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index 5e1f51d35a0..15f69557735 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -475,6 +475,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index c2385bed6fc..73cbeb1896f 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -480,6 +480,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index f4ff97b0387..0728078fcdb 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -475,6 +475,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
index b484e25eb99..2f8e65438f6 100644
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index 44fdc908444..75a54e7632d 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index ff048cd23bd..99498dc0296 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -473,6 +473,9 @@
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h
index 789a6656517..59132996057 100644
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@@ -474,6 +474,9 @@
// Include a page of printer information in the LCD Main Menu
#define LCD_INFO_MENU
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index d1c9d2ebcbc..213303b7730 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -172,10 +172,13 @@ uint16_t max_display_update_time = 0;
void lcd_move_menu();
void lcd_control_menu();
void lcd_control_temperature_menu();
- void lcd_control_temperature_preheat_material1_settings_menu();
- void lcd_control_temperature_preheat_material2_settings_menu();
void lcd_control_motion_menu();
+ #if DISABLED(SLIM_LCD_MENUS)
+ void lcd_control_temperature_preheat_material1_settings_menu();
+ void lcd_control_temperature_preheat_material2_settings_menu();
+ #endif
+
#if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE)
void lcd_control_filament_menu();
#endif
@@ -2559,7 +2562,7 @@ void kill_screen(const char* lcd_msg) {
lcd_bed_leveling
#endif
);
- #elif PLANNER_LEVELING && DISABLED(PROBE_MANUALLY)
+ #elif PLANNER_LEVELING && DISABLED(PROBE_MANUALLY) && DISABLED(SLIM_LCD_MENUS)
MENU_ITEM(gcode, MSG_BED_LEVELING, PSTR("G28\nG29"));
#endif
@@ -2568,7 +2571,7 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM(function, MSG_LEVEL_CORNERS, _lcd_level_bed_corners);
#endif
- #if HAS_M206_COMMAND
+ #if HAS_M206_COMMAND && DISABLED(SLIM_LCD_MENUS)
//
// Set Home Offsets
//
@@ -3168,8 +3171,10 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings);
MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings);
#endif
+
MENU_ITEM(function, MSG_RESTORE_FAILSAFE, lcd_factory_settings);
- #if ENABLED(EEPROM_SETTINGS)
+
+ #if ENABLED(EEPROM_SETTINGS) && DISABLED(SLIM_LCD_MENUS)
MENU_ITEM(submenu, MSG_INIT_EEPROM, lcd_init_eeprom_confirm);
#endif
@@ -3381,64 +3386,228 @@ void kill_screen(const char* lcd_msg) {
#endif // PIDTEMP
- //
- // Preheat Material 1 conf
- //
- MENU_ITEM(submenu, MSG_PREHEAT_1_SETTINGS, lcd_control_temperature_preheat_material1_settings_menu);
+ #if DISABLED(SLIM_LCD_MENUS)
+ //
+ // Preheat Material 1 conf
+ //
+ MENU_ITEM(submenu, MSG_PREHEAT_1_SETTINGS, lcd_control_temperature_preheat_material1_settings_menu);
+
+ //
+ // Preheat Material 2 conf
+ //
+ MENU_ITEM(submenu, MSG_PREHEAT_2_SETTINGS, lcd_control_temperature_preheat_material2_settings_menu);
+ #endif
- //
- // Preheat Material 2 conf
- //
- MENU_ITEM(submenu, MSG_PREHEAT_2_SETTINGS, lcd_control_temperature_preheat_material2_settings_menu);
END_MENU();
}
- void _lcd_control_temperature_preheat_settings_menu(uint8_t material) {
- #if HOTENDS > 4
- #define MINTEMP_ALL MIN5(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP)
- #define MAXTEMP_ALL MAX5(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP)
- #elif HOTENDS > 3
- #define MINTEMP_ALL MIN4(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP)
- #define MAXTEMP_ALL MAX4(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP)
- #elif HOTENDS > 2
- #define MINTEMP_ALL MIN3(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP)
- #define MAXTEMP_ALL MAX3(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP)
- #elif HOTENDS > 1
- #define MINTEMP_ALL min(HEATER_0_MINTEMP, HEATER_1_MINTEMP)
- #define MAXTEMP_ALL max(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP)
- #else
- #define MINTEMP_ALL HEATER_0_MINTEMP
- #define MAXTEMP_ALL HEATER_0_MAXTEMP
- #endif
- START_MENU();
- MENU_BACK(MSG_TEMPERATURE);
- MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &lcd_preheat_fan_speed[material], 0, 255);
- #if TEMP_SENSOR_0 != 0
- MENU_ITEM_EDIT(int3, MSG_NOZZLE, &lcd_preheat_hotend_temp[material], MINTEMP_ALL, MAXTEMP_ALL - 15);
- #endif
- #if TEMP_SENSOR_BED != 0
- MENU_ITEM_EDIT(int3, MSG_BED, &lcd_preheat_bed_temp[material], BED_MINTEMP, BED_MAXTEMP - 15);
- #endif
- #if ENABLED(EEPROM_SETTINGS)
- MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings);
- #endif
- END_MENU();
- }
+ #if DISABLED(SLIM_LCD_MENUS)
- /**
- *
- * "Temperature" > "Preheat Material 1 conf" submenu
- *
- */
- void lcd_control_temperature_preheat_material1_settings_menu() { _lcd_control_temperature_preheat_settings_menu(0); }
+ void _lcd_control_temperature_preheat_settings_menu(const uint8_t material) {
+ #if HOTENDS > 4
+ #define MINTEMP_ALL MIN5(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP)
+ #define MAXTEMP_ALL MAX5(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP)
+ #elif HOTENDS > 3
+ #define MINTEMP_ALL MIN4(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP)
+ #define MAXTEMP_ALL MAX4(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP)
+ #elif HOTENDS > 2
+ #define MINTEMP_ALL MIN3(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP)
+ #define MAXTEMP_ALL MAX3(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP)
+ #elif HOTENDS > 1
+ #define MINTEMP_ALL min(HEATER_0_MINTEMP, HEATER_1_MINTEMP)
+ #define MAXTEMP_ALL max(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP)
+ #else
+ #define MINTEMP_ALL HEATER_0_MINTEMP
+ #define MAXTEMP_ALL HEATER_0_MAXTEMP
+ #endif
+ START_MENU();
+ MENU_BACK(MSG_TEMPERATURE);
+ MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &lcd_preheat_fan_speed[material], 0, 255);
+ #if TEMP_SENSOR_0 != 0
+ MENU_ITEM_EDIT(int3, MSG_NOZZLE, &lcd_preheat_hotend_temp[material], MINTEMP_ALL, MAXTEMP_ALL - 15);
+ #endif
+ #if TEMP_SENSOR_BED != 0
+ MENU_ITEM_EDIT(int3, MSG_BED, &lcd_preheat_bed_temp[material], BED_MINTEMP, BED_MAXTEMP - 15);
+ #endif
+ #if ENABLED(EEPROM_SETTINGS)
+ MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings);
+ #endif
+ END_MENU();
+ }
- /**
- *
- * "Temperature" > "Preheat Material 2 conf" submenu
- *
- */
- void lcd_control_temperature_preheat_material2_settings_menu() { _lcd_control_temperature_preheat_settings_menu(1); }
+ /**
+ *
+ * "Temperature" > "Preheat Material 1 conf" submenu
+ *
+ */
+ void lcd_control_temperature_preheat_material1_settings_menu() { _lcd_control_temperature_preheat_settings_menu(0); }
+ /**
+ *
+ * "Temperature" > "Preheat Material 2 conf" submenu
+ *
+ */
+ void lcd_control_temperature_preheat_material2_settings_menu() { _lcd_control_temperature_preheat_settings_menu(1); }
+
+ void _reset_acceleration_rates() { planner.reset_acceleration_rates(); }
+ #if ENABLED(DISTINCT_E_FACTORS)
+ void _reset_e_acceleration_rate(const uint8_t e) { if (e == active_extruder) _reset_acceleration_rates(); }
+ void _reset_e0_acceleration_rate() { _reset_e_acceleration_rate(0); }
+ void _reset_e1_acceleration_rate() { _reset_e_acceleration_rate(1); }
+ #if E_STEPPERS > 2
+ void _reset_e2_acceleration_rate() { _reset_e_acceleration_rate(2); }
+ #if E_STEPPERS > 3
+ void _reset_e3_acceleration_rate() { _reset_e_acceleration_rate(3); }
+ #if E_STEPPERS > 4
+ void _reset_e4_acceleration_rate() { _reset_e_acceleration_rate(4); }
+ #endif // E_STEPPERS > 4
+ #endif // E_STEPPERS > 3
+ #endif // E_STEPPERS > 2
+ #endif
+
+ void _planner_refresh_positioning() { planner.refresh_positioning(); }
+ #if ENABLED(DISTINCT_E_FACTORS)
+ void _planner_refresh_e_positioning(const uint8_t e) {
+ if (e == active_extruder)
+ _planner_refresh_positioning();
+ else
+ planner.steps_to_mm[E_AXIS + e] = 1.0 / planner.axis_steps_per_mm[E_AXIS + e];
+ }
+ void _planner_refresh_e0_positioning() { _planner_refresh_e_positioning(0); }
+ void _planner_refresh_e1_positioning() { _planner_refresh_e_positioning(1); }
+ #if E_STEPPERS > 2
+ void _planner_refresh_e2_positioning() { _planner_refresh_e_positioning(2); }
+ #if E_STEPPERS > 3
+ void _planner_refresh_e3_positioning() { _planner_refresh_e_positioning(3); }
+ #if E_STEPPERS > 4
+ void _planner_refresh_e4_positioning() { _planner_refresh_e_positioning(4); }
+ #endif // E_STEPPERS > 4
+ #endif // E_STEPPERS > 3
+ #endif // E_STEPPERS > 2
+ #endif
+
+ // M203 / M205 Velocity options
+ void lcd_control_motion_velocity_menu() {
+ START_MENU();
+ MENU_BACK(MSG_MOTION);
+
+ // M203 Max Feedrate
+ MENU_ITEM_EDIT(float3, MSG_VMAX MSG_X, &planner.max_feedrate_mm_s[X_AXIS], 1, 999);
+ MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Y, &planner.max_feedrate_mm_s[Y_AXIS], 1, 999);
+ MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Z, &planner.max_feedrate_mm_s[Z_AXIS], 1, 999);
+
+ #if ENABLED(DISTINCT_E_FACTORS)
+ MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E, &planner.max_feedrate_mm_s[E_AXIS + active_extruder], 1, 999);
+ MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E1, &planner.max_feedrate_mm_s[E_AXIS], 1, 999);
+ MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E2, &planner.max_feedrate_mm_s[E_AXIS + 1], 1, 999);
+ #if E_STEPPERS > 2
+ MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E3, &planner.max_feedrate_mm_s[E_AXIS + 2], 1, 999);
+ #if E_STEPPERS > 3
+ MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E4, &planner.max_feedrate_mm_s[E_AXIS + 3], 1, 999);
+ #if E_STEPPERS > 4
+ MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E5, &planner.max_feedrate_mm_s[E_AXIS + 4], 1, 999);
+ #endif // E_STEPPERS > 4
+ #endif // E_STEPPERS > 3
+ #endif // E_STEPPERS > 2
+ #else
+ MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E, &planner.max_feedrate_mm_s[E_AXIS], 1, 999);
+ #endif
+
+ // M205 S Min Feedrate
+ MENU_ITEM_EDIT(float3, MSG_VMIN, &planner.min_feedrate_mm_s, 0, 999);
+
+ // M205 T Min Travel Feedrate
+ MENU_ITEM_EDIT(float3, MSG_VTRAV_MIN, &planner.min_travel_feedrate_mm_s, 0, 999);
+
+ END_MENU();
+ }
+
+ // M201 / M204 Accelerations
+ void lcd_control_motion_acceleration_menu() {
+ START_MENU();
+ MENU_BACK(MSG_MOTION);
+
+ // M204 P Acceleration
+ MENU_ITEM_EDIT(float5, MSG_ACC, &planner.acceleration, 10, 99000);
+
+ // M204 R Retract Acceleration
+ MENU_ITEM_EDIT(float5, MSG_A_RETRACT, &planner.retract_acceleration, 100, 99000);
+
+ // M204 T Travel Acceleration
+ MENU_ITEM_EDIT(float5, MSG_A_TRAVEL, &planner.travel_acceleration, 100, 99000);
+
+ // M201 settings
+ MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_X, &planner.max_acceleration_mm_per_s2[X_AXIS], 100, 99000, _reset_acceleration_rates);
+ MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Y, &planner.max_acceleration_mm_per_s2[Y_AXIS], 100, 99000, _reset_acceleration_rates);
+ MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Z, &planner.max_acceleration_mm_per_s2[Z_AXIS], 10, 99000, _reset_acceleration_rates);
+
+ #if ENABLED(DISTINCT_E_FACTORS)
+ MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &planner.max_acceleration_mm_per_s2[E_AXIS + active_extruder], 100, 99000, _reset_acceleration_rates);
+ MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E1, &planner.max_acceleration_mm_per_s2[E_AXIS], 100, 99000, _reset_e0_acceleration_rate);
+ MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E2, &planner.max_acceleration_mm_per_s2[E_AXIS + 1], 100, 99000, _reset_e1_acceleration_rate);
+ #if E_STEPPERS > 2
+ MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E3, &planner.max_acceleration_mm_per_s2[E_AXIS + 2], 100, 99000, _reset_e2_acceleration_rate);
+ #if E_STEPPERS > 3
+ MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E4, &planner.max_acceleration_mm_per_s2[E_AXIS + 3], 100, 99000, _reset_e3_acceleration_rate);
+ #if E_STEPPERS > 4
+ MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E5, &planner.max_acceleration_mm_per_s2[E_AXIS + 4], 100, 99000, _reset_e4_acceleration_rate);
+ #endif // E_STEPPERS > 4
+ #endif // E_STEPPERS > 3
+ #endif // E_STEPPERS > 2
+ #else
+ MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &planner.max_acceleration_mm_per_s2[E_AXIS], 100, 99000, _reset_acceleration_rates);
+ #endif
+
+ END_MENU();
+ }
+
+ // M205 Jerk
+ void lcd_control_motion_jerk_menu() {
+ START_MENU();
+ MENU_BACK(MSG_MOTION);
+
+ MENU_ITEM_EDIT(float3, MSG_VX_JERK, &planner.max_jerk[X_AXIS], 1, 990);
+ MENU_ITEM_EDIT(float3, MSG_VY_JERK, &planner.max_jerk[Y_AXIS], 1, 990);
+ #if ENABLED(DELTA)
+ MENU_ITEM_EDIT(float3, MSG_VZ_JERK, &planner.max_jerk[Z_AXIS], 1, 990);
+ #else
+ MENU_ITEM_EDIT(float52, MSG_VZ_JERK, &planner.max_jerk[Z_AXIS], 0.1, 990);
+ #endif
+ MENU_ITEM_EDIT(float3, MSG_VE_JERK, &planner.max_jerk[E_AXIS], 1, 990);
+
+ END_MENU();
+ }
+
+ // M92 Steps-per-mm
+ void lcd_control_motion_steps_per_mm_menu() {
+ START_MENU();
+ MENU_BACK(MSG_MOTION);
+
+ MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_XSTEPS, &planner.axis_steps_per_mm[X_AXIS], 5, 9999, _planner_refresh_positioning);
+ MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_YSTEPS, &planner.axis_steps_per_mm[Y_AXIS], 5, 9999, _planner_refresh_positioning);
+ MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ZSTEPS, &planner.axis_steps_per_mm[Z_AXIS], 5, 9999, _planner_refresh_positioning);
+
+ #if ENABLED(DISTINCT_E_FACTORS)
+ MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ESTEPS, &planner.axis_steps_per_mm[E_AXIS + active_extruder], 5, 9999, _planner_refresh_positioning);
+ MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E1STEPS, &planner.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_e0_positioning);
+ MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E2STEPS, &planner.axis_steps_per_mm[E_AXIS + 1], 5, 9999, _planner_refresh_e1_positioning);
+ #if E_STEPPERS > 2
+ MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E3STEPS, &planner.axis_steps_per_mm[E_AXIS + 2], 5, 9999, _planner_refresh_e2_positioning);
+ #if E_STEPPERS > 3
+ MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E4STEPS, &planner.axis_steps_per_mm[E_AXIS + 3], 5, 9999, _planner_refresh_e3_positioning);
+ #if E_STEPPERS > 4
+ MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E5STEPS, &planner.axis_steps_per_mm[E_AXIS + 4], 5, 9999, _planner_refresh_e4_positioning);
+ #endif // E_STEPPERS > 4
+ #endif // E_STEPPERS > 3
+ #endif // E_STEPPERS > 2
+ #else
+ MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ESTEPS, &planner.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_positioning);
+ #endif
+
+ END_MENU();
+ }
+
+ #endif // !SLIM_LCD_MENUS
/**
*
@@ -3446,164 +3615,6 @@ void kill_screen(const char* lcd_msg) {
*
*/
- void _reset_acceleration_rates() { planner.reset_acceleration_rates(); }
- #if ENABLED(DISTINCT_E_FACTORS)
- void _reset_e_acceleration_rate(const uint8_t e) { if (e == active_extruder) _reset_acceleration_rates(); }
- void _reset_e0_acceleration_rate() { _reset_e_acceleration_rate(0); }
- void _reset_e1_acceleration_rate() { _reset_e_acceleration_rate(1); }
- #if E_STEPPERS > 2
- void _reset_e2_acceleration_rate() { _reset_e_acceleration_rate(2); }
- #if E_STEPPERS > 3
- void _reset_e3_acceleration_rate() { _reset_e_acceleration_rate(3); }
- #if E_STEPPERS > 4
- void _reset_e4_acceleration_rate() { _reset_e_acceleration_rate(4); }
- #endif // E_STEPPERS > 4
- #endif // E_STEPPERS > 3
- #endif // E_STEPPERS > 2
- #endif
-
- void _planner_refresh_positioning() { planner.refresh_positioning(); }
- #if ENABLED(DISTINCT_E_FACTORS)
- void _planner_refresh_e_positioning(const uint8_t e) {
- if (e == active_extruder)
- _planner_refresh_positioning();
- else
- planner.steps_to_mm[E_AXIS + e] = 1.0 / planner.axis_steps_per_mm[E_AXIS + e];
- }
- void _planner_refresh_e0_positioning() { _planner_refresh_e_positioning(0); }
- void _planner_refresh_e1_positioning() { _planner_refresh_e_positioning(1); }
- #if E_STEPPERS > 2
- void _planner_refresh_e2_positioning() { _planner_refresh_e_positioning(2); }
- #if E_STEPPERS > 3
- void _planner_refresh_e3_positioning() { _planner_refresh_e_positioning(3); }
- #if E_STEPPERS > 4
- void _planner_refresh_e4_positioning() { _planner_refresh_e_positioning(4); }
- #endif // E_STEPPERS > 4
- #endif // E_STEPPERS > 3
- #endif // E_STEPPERS > 2
- #endif
-
- // M203 / M205 Velocity options
- void lcd_control_motion_velocity_menu() {
- START_MENU();
- MENU_BACK(MSG_MOTION);
-
- // M203 Max Feedrate
- MENU_ITEM_EDIT(float3, MSG_VMAX MSG_X, &planner.max_feedrate_mm_s[X_AXIS], 1, 999);
- MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Y, &planner.max_feedrate_mm_s[Y_AXIS], 1, 999);
- MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Z, &planner.max_feedrate_mm_s[Z_AXIS], 1, 999);
-
- #if ENABLED(DISTINCT_E_FACTORS)
- MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E, &planner.max_feedrate_mm_s[E_AXIS + active_extruder], 1, 999);
- MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E1, &planner.max_feedrate_mm_s[E_AXIS], 1, 999);
- MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E2, &planner.max_feedrate_mm_s[E_AXIS + 1], 1, 999);
- #if E_STEPPERS > 2
- MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E3, &planner.max_feedrate_mm_s[E_AXIS + 2], 1, 999);
- #if E_STEPPERS > 3
- MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E4, &planner.max_feedrate_mm_s[E_AXIS + 3], 1, 999);
- #if E_STEPPERS > 4
- MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E5, &planner.max_feedrate_mm_s[E_AXIS + 4], 1, 999);
- #endif // E_STEPPERS > 4
- #endif // E_STEPPERS > 3
- #endif // E_STEPPERS > 2
- #else
- MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E, &planner.max_feedrate_mm_s[E_AXIS], 1, 999);
- #endif
-
- // M205 S Min Feedrate
- MENU_ITEM_EDIT(float3, MSG_VMIN, &planner.min_feedrate_mm_s, 0, 999);
-
- // M205 T Min Travel Feedrate
- MENU_ITEM_EDIT(float3, MSG_VTRAV_MIN, &planner.min_travel_feedrate_mm_s, 0, 999);
-
- END_MENU();
- }
-
- // M201 / M204 Accelerations
- void lcd_control_motion_acceleration_menu() {
- START_MENU();
- MENU_BACK(MSG_MOTION);
-
- // M204 P Acceleration
- MENU_ITEM_EDIT(float5, MSG_ACC, &planner.acceleration, 10, 99000);
-
- // M204 R Retract Acceleration
- MENU_ITEM_EDIT(float5, MSG_A_RETRACT, &planner.retract_acceleration, 100, 99000);
-
- // M204 T Travel Acceleration
- MENU_ITEM_EDIT(float5, MSG_A_TRAVEL, &planner.travel_acceleration, 100, 99000);
-
- // M201 settings
- MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_X, &planner.max_acceleration_mm_per_s2[X_AXIS], 100, 99000, _reset_acceleration_rates);
- MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Y, &planner.max_acceleration_mm_per_s2[Y_AXIS], 100, 99000, _reset_acceleration_rates);
- MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Z, &planner.max_acceleration_mm_per_s2[Z_AXIS], 10, 99000, _reset_acceleration_rates);
-
- #if ENABLED(DISTINCT_E_FACTORS)
- MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &planner.max_acceleration_mm_per_s2[E_AXIS + active_extruder], 100, 99000, _reset_acceleration_rates);
- MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E1, &planner.max_acceleration_mm_per_s2[E_AXIS], 100, 99000, _reset_e0_acceleration_rate);
- MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E2, &planner.max_acceleration_mm_per_s2[E_AXIS + 1], 100, 99000, _reset_e1_acceleration_rate);
- #if E_STEPPERS > 2
- MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E3, &planner.max_acceleration_mm_per_s2[E_AXIS + 2], 100, 99000, _reset_e2_acceleration_rate);
- #if E_STEPPERS > 3
- MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E4, &planner.max_acceleration_mm_per_s2[E_AXIS + 3], 100, 99000, _reset_e3_acceleration_rate);
- #if E_STEPPERS > 4
- MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E5, &planner.max_acceleration_mm_per_s2[E_AXIS + 4], 100, 99000, _reset_e4_acceleration_rate);
- #endif // E_STEPPERS > 4
- #endif // E_STEPPERS > 3
- #endif // E_STEPPERS > 2
- #else
- MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &planner.max_acceleration_mm_per_s2[E_AXIS], 100, 99000, _reset_acceleration_rates);
- #endif
-
- END_MENU();
- }
-
- // M205 Jerk
- void lcd_control_motion_jerk_menu() {
- START_MENU();
- MENU_BACK(MSG_MOTION);
-
- MENU_ITEM_EDIT(float3, MSG_VX_JERK, &planner.max_jerk[X_AXIS], 1, 990);
- MENU_ITEM_EDIT(float3, MSG_VY_JERK, &planner.max_jerk[Y_AXIS], 1, 990);
- #if ENABLED(DELTA)
- MENU_ITEM_EDIT(float3, MSG_VZ_JERK, &planner.max_jerk[Z_AXIS], 1, 990);
- #else
- MENU_ITEM_EDIT(float52, MSG_VZ_JERK, &planner.max_jerk[Z_AXIS], 0.1, 990);
- #endif
- MENU_ITEM_EDIT(float3, MSG_VE_JERK, &planner.max_jerk[E_AXIS], 1, 990);
-
- END_MENU();
- }
-
- // M92 Steps-per-mm
- void lcd_control_motion_steps_per_mm_menu() {
- START_MENU();
- MENU_BACK(MSG_MOTION);
-
- MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_XSTEPS, &planner.axis_steps_per_mm[X_AXIS], 5, 9999, _planner_refresh_positioning);
- MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_YSTEPS, &planner.axis_steps_per_mm[Y_AXIS], 5, 9999, _planner_refresh_positioning);
- MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ZSTEPS, &planner.axis_steps_per_mm[Z_AXIS], 5, 9999, _planner_refresh_positioning);
-
- #if ENABLED(DISTINCT_E_FACTORS)
- MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ESTEPS, &planner.axis_steps_per_mm[E_AXIS + active_extruder], 5, 9999, _planner_refresh_positioning);
- MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E1STEPS, &planner.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_e0_positioning);
- MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E2STEPS, &planner.axis_steps_per_mm[E_AXIS + 1], 5, 9999, _planner_refresh_e1_positioning);
- #if E_STEPPERS > 2
- MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E3STEPS, &planner.axis_steps_per_mm[E_AXIS + 2], 5, 9999, _planner_refresh_e2_positioning);
- #if E_STEPPERS > 3
- MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E4STEPS, &planner.axis_steps_per_mm[E_AXIS + 3], 5, 9999, _planner_refresh_e3_positioning);
- #if E_STEPPERS > 4
- MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E5STEPS, &planner.axis_steps_per_mm[E_AXIS + 4], 5, 9999, _planner_refresh_e4_positioning);
- #endif // E_STEPPERS > 4
- #endif // E_STEPPERS > 3
- #endif // E_STEPPERS > 2
- #else
- MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ESTEPS, &planner.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_positioning);
- #endif
-
- END_MENU();
- }
-
void lcd_control_motion_menu() {
START_MENU();
MENU_BACK(MSG_CONTROL);
@@ -3614,17 +3625,21 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM_EDIT(float32, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX);
#endif
- // M203 / M205 - Feedrate items
- MENU_ITEM(submenu, MSG_VELOCITY, lcd_control_motion_velocity_menu);
+ #if DISABLED(SLIM_LCD_MENUS)
- // M201 - Acceleration items
- MENU_ITEM(submenu, MSG_ACCELERATION, lcd_control_motion_acceleration_menu);
+ // M203 / M205 - Feedrate items
+ MENU_ITEM(submenu, MSG_VELOCITY, lcd_control_motion_velocity_menu);
- // M205 - Max Jerk
- MENU_ITEM(submenu, MSG_JERK, lcd_control_motion_jerk_menu);
+ // M201 - Acceleration items
+ MENU_ITEM(submenu, MSG_ACCELERATION, lcd_control_motion_acceleration_menu);
- // M92 - Steps Per mm
- MENU_ITEM(submenu, MSG_STEPS_PER_MM, lcd_control_motion_steps_per_mm_menu);
+ // M205 - Max Jerk
+ MENU_ITEM(submenu, MSG_JERK, lcd_control_motion_jerk_menu);
+
+ // M92 - Steps Per mm
+ MENU_ITEM(submenu, MSG_STEPS_PER_MM, lcd_control_motion_steps_per_mm_menu);
+
+ #endif // !SLIM_LCD_MENUS
// M540 S - Abort on endstop hit when SD printing
#if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)