From 91ab18d1d2825b85cbd17e8ef1eb0675754a4043 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 6 Oct 2023 16:08:30 -0500 Subject: [PATCH] =?UTF-8?q?=F0=9F=93=9D=20Some=20settings=20units?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/Configuration.h | 2 +- Marlin/Configuration_adv.h | 36 ++++++++++++++++++------------------ 2 files changed, 19 insertions(+), 19 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index c00e59b5cd5..6111f482f14 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -665,7 +665,7 @@ //#define MPCTEMP // ** EXPERIMENTAL ** See https://marlinfw.org/docs/features/model_predictive_control.html #define PID_MAX 255 // Limit hotend current while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop +#define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) //#define PID_DEBUG // Print PID debug data to the serial port. Use 'M303 D' to toggle activation. diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index b95b0c49e0c..f07602dbe9e 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -304,8 +304,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // (seconds) + #define THERMAL_PROTECTION_HYSTERESIS 4 // (°C) //#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops #if ENABLED(ADAPTIVE_FAN_SLOWING) @@ -327,50 +327,50 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // (seconds) + #define WATCH_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C) /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // (seconds) + #define WATCH_BED_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // (seconds) + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C) /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // (seconds) + #define WATCH_CHAMBER_TEMP_INCREASE 2 // (°C) #endif /** * Thermal Protection parameters for the laser cooler. */ #if ENABLED(THERMAL_PROTECTION_COOLER) - #define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds - #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_COOLER_PERIOD 10 // (seconds) + #define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // (°C) /** * Laser cooling watch settings (M143/M193). */ - #define WATCH_COOLER_TEMP_PERIOD 60 // Seconds - #define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius + #define WATCH_COOLER_TEMP_PERIOD 60 // (seconds) + #define WATCH_COOLER_TEMP_INCREASE 3 // (°C) #endif #if ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED, THERMAL_PROTECTION_CHAMBER, THERMAL_PROTECTION_COOLER) @@ -2413,7 +2413,7 @@ // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. // Note: The Z=0.0 offset is determined by the probe Z offset (e.g., as set with M851 Z). - #define PTC_PROBE_HEATING_OFFSET 0.5 + #define PTC_PROBE_HEATING_OFFSET 0.5 // (mm) #endif #endif // PTC_PROBE || PTC_BED || PTC_HOTEND @@ -2611,7 +2611,7 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +//#define NO_TIMEOUTS 1000 // (ms) // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. //#define ADVANCED_OK