diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 3b9c62184a0..3bacb22eac0 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -501,10 +501,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X 10
-  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
-  #define MESH_MIN_Y 10
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
+  #define MESH_INSET 10        // Mesh inset margin on print area
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h
index c4e03aadaad..67b15001864 100644
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@@ -499,10 +499,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X 10
-  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
-  #define MESH_MIN_Y 10
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
+  #define MESH_INSET 10        // Mesh inset margin on print area
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index a2a43ed9b93..fd6051945f2 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -511,10 +511,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X 10
-  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
-  #define MESH_MIN_Y 10
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
+  #define MESH_INSET 10        // Mesh inset margin on print area
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h
index 3be2505bb2c..3a9e23ce915 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@@ -513,10 +513,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X 10
-  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
-  #define MESH_MIN_Y 10
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
+  #define MESH_INSET 10        // Mesh inset margin on print area
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index c9dc2c3feb4..95338bd3677 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -536,10 +536,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X 10
-  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
-  #define MESH_MIN_Y 10
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
+  #define MESH_INSET 10        // Mesh inset margin on print area
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index 4c03ddf3c0f..740e0cbb2bf 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -519,10 +519,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X 10
-  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
-  #define MESH_MIN_Y 10
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
+  #define MESH_INSET 10        // Mesh inset margin on print area
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index e3d38fda03a..a532d702b3d 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -513,10 +513,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X 10
-  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
-  #define MESH_MIN_Y 10
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
+  #define MESH_INSET 10        // Mesh inset margin on print area
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 15e83223ee6..127fc5f87f9 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -527,10 +527,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X 10
-  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
-  #define MESH_MIN_Y 10
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
+  #define MESH_INSET 10        // Mesh inset margin on print area
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h
index f65443b6dd9..6da5d80c16b 100644
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@@ -540,10 +540,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X 10
-  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
-  #define MESH_MIN_Y 10
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
+  #define MESH_INSET 10        // Mesh inset margin on print area
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 380759fc807..55d2136c123 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -511,10 +511,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X 10
-  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
-  #define MESH_MIN_Y 10
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
+  #define MESH_INSET 10        // Mesh inset margin on print area
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 12142aff02d..670bc634602 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -519,10 +519,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X 10
-  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
-  #define MESH_MIN_Y 10
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
+  #define MESH_INSET 10        // Mesh inset margin on print area
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h
index 9ccfaca36df..3c4d589a656 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@@ -561,10 +561,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X 10
-  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
-  #define MESH_MIN_Y 10
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
+  #define MESH_INSET 10        // Mesh inset margin on print area
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 1465d2d4c04..12e195c5e09 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -561,10 +561,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X 10
-  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
-  #define MESH_MIN_Y 10
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
+  #define MESH_INSET 10        // Mesh inset margin on print area
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index c432ec4700b..67a02053ded 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -561,10 +561,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X 10
-  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
-  #define MESH_MIN_Y 10
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
+  #define MESH_INSET 10        // Mesh inset margin on print area
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index 8c7042f7bd8..c03fd2fc614 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -550,10 +550,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X 10
-  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
-  #define MESH_MIN_Y 10
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
+  #define MESH_INSET 10        // Mesh inset margin on print area
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index b0ce02ff807..31aab5a882e 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -559,10 +559,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X 10
-  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
-  #define MESH_MIN_Y 10
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
+  #define MESH_INSET 10        // Mesh inset margin on print area
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index f3318538217..9abfe8db6fb 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -522,10 +522,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X 10
-  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
-  #define MESH_MIN_Y 10
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
+  #define MESH_INSET 10        // Mesh inset margin on print area
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 3b6abfec501..01b6a064108 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -509,10 +509,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 //#define MESH_BED_LEVELING    // Enable mesh bed leveling.
 
 #if ENABLED(MESH_BED_LEVELING)
-  #define MESH_MIN_X 10
-  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
-  #define MESH_MIN_Y 10
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
+  #define MESH_INSET 10        // Mesh inset margin on print area
   #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.