3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-26 21:36:21 +00:00
Code Issues Releases Wiki Activity

🔧 Fix up WiFi options (#25586)

Browse Source
This commit is contained in:
Scott Lahteine 2023-03-28 16:14:37 -05:00 committed by GitHub
parent de0cd66070
commit 9911104036
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
17 changed files with 217 additions and 183 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
Marlin/src/HAL/ESP32/HAL.h
View File

@ -50,14 +50,12 @@
#define MYSERIAL1 flushableSerial
#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT)
#if ENABLED(ESP3D_WIFISUPPORT)
typedef ForwardSerial1Class< decltype(Serial2Socket) > DefaultSerial1;
extern DefaultSerial1 MSerial0;
#define MYSERIAL2 MSerial0
#else
#define MYSERIAL2 webSocketSerial
#endif
#if ENABLED(ESP3D_WIFISUPPORT)
typedef ForwardSerial1Class< decltype(Serial2Socket) > DefaultSerial1;
extern DefaultSerial1 MSerial0;
#define MYSERIAL2 MSerial0
#elif ENABLED(WIFISUPPORT)
#define MYSERIAL2 webSocketSerial
#endif
#define CRITICAL_SECTION_START() portENTER_CRITICAL(&hal.spinlock)

5
Marlin/src/HAL/shared/esp_wifi.cpp
View File

@ -21,6 +21,9 @@
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(WIFISUPPORT)
#include "Delay.h"
void esp_wifi_init(void) { // init ESP01 WIFI module pins
@ -41,3 +44,5 @@ void esp_wifi_init(void) { // init ESP01 WIFI module pi
OUT_WRITE(ESP_WIFI_MODULE_ENABLE_PIN, HIGH);
#endif
}
#endif // WIFISUPPORT

8
Marlin/src/MarlinCore.cpp
View File

@ -34,6 +34,10 @@
#include "HAL/shared/esp_wifi.h"
#include "HAL/shared/cpu_exception/exception_hook.h"
#if ENABLED(WIFISUPPORT)
#include "HAL/shared/esp_wifi.h"
#endif
#ifdef ARDUINO
#include <pins_arduino.h>
#endif
@ -1270,7 +1274,9 @@ void setup() {
SETUP_RUN(hal.init_board());
SETUP_RUN(esp_wifi_init());
#if ENABLED(WIFISUPPORT)
SETUP_RUN(esp_wifi_init());
#endif
// Report Reset Reason
if (mcu & RST_POWER_ON) SERIAL_ECHOLNPGM(STR_POWERUP);

10
Marlin/src/inc/SanityCheck.h
View File

@ -4307,10 +4307,14 @@ static_assert(_PLUS_TEST(4), "HOMING_FEEDRATE_MM_M values must be positive.");
#endif
/**
* Sanity check for WIFI
* Sanity check WiFi options
*/
#if EITHER(ESP3D_WIFISUPPORT, WIFISUPPORT) && DISABLED(ARDUINO_ARCH_ESP32)
#error "ESP3D_WIFISUPPORT or WIFISUPPORT requires an ESP32 MOTHERBOARD."
#if ENABLED(ESP3D_WIFISUPPORT) && DISABLED(ARDUINO_ARCH_ESP32)
#error "ESP3D_WIFISUPPORT requires an ESP32 MOTHERBOARD."
#elif ENABLED(WEBSUPPORT) && NONE(ARDUINO_ARCH_ESP32, WIFISUPPORT)
#error "WEBSUPPORT requires WIFISUPPORT and an ESP32 MOTHERBOARD."
#elif BOTH(ESP3D_WIFISUPPORT, WIFISUPPORT)
#error "Enable only one of ESP3D_WIFISUPPORT or WIFISUPPORT."
#endif
/**

12
Marlin/src/pins/sam/pins_RURAMPS4D_11.h
View File

@ -163,11 +163,13 @@
#define TFT_LCD_MODULE_COM 1
#define TFT_LCD_MODULE_BAUDRATE 115600
// ESP WiFi Use internal USART-2
#define ESP_WIFI_MODULE_COM 2
#define ESP_WIFI_MODULE_BAUDRATE 115600
#define ESP_WIFI_MODULE_RESET_PIN -1
#define PIGGY_GPIO_PIN -1
#if ENABLED(WIFISUPPORT)
// ESP WiFi Use internal USART-2
#define ESP_WIFI_MODULE_COM 2
#define ESP_WIFI_MODULE_BAUDRATE 115600
#define ESP_WIFI_MODULE_RESET_PIN -1
#define PIGGY_GPIO_PIN -1
#endif
//
// EEPROM

12
Marlin/src/pins/sam/pins_RURAMPS4D_13.h
View File

@ -153,11 +153,13 @@
#define TFT_LCD_MODULE_COM 1
#define TFT_LCD_MODULE_BAUDRATE 115200
// ESP WiFi Use internal USART-2
#define ESP_WIFI_MODULE_COM 2
#define ESP_WIFI_MODULE_BAUDRATE 115200
#define ESP_WIFI_MODULE_RESET_PIN -1
#define PIGGY_GPIO_PIN -1
#if ENABLED(WIFISUPPORT)
// ESP WiFi Use internal USART-2
#define ESP_WIFI_MODULE_COM 2
#define ESP_WIFI_MODULE_BAUDRATE 115200
#define ESP_WIFI_MODULE_RESET_PIN -1
#define PIGGY_GPIO_PIN -1
#endif
//
// EEPROM

44
Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h
View File

@ -138,27 +138,29 @@
#define DEFAULT_PWM_MOTOR_CURRENT { 800, 800, 800 }
#endif
/**
* MKS Robin_Wifi or another ESP8266 module
*
* __ESP(M1)__ -J1-
* GND| 15 | | 08 |+3v3 (22) RXD1 (PA10)
* | 16 | | 07 |MOSI (21) TXD1 (PA9) Active LOW, probably OK to leave floating
* IO2| 17 | | 06 |MISO (19) IO1 (PC7) Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating)
* IO0| 18 | | 05 |CLK (18) IO0 (PA8) Must be HIGH (ESP3D software configures this with a pullup so OK to leave as floating)
* IO1| 19 | | 03 |EN (03) WIFI_EN Must be HIGH for module to run
* | nc | | nc | (01) WIFI_CTRL (PA5)
* RX| 21 | | nc |
* TX| 22 | | 01 |RST
* ￣￣ AE￣￣
*/
// Module ESP-WIFI
#define ESP_WIFI_MODULE_COM 2 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
#define ESP_WIFI_MODULE_RESET_PIN PA5 // WIFI CTRL/RST
#define ESP_WIFI_MODULE_ENABLE_PIN -1
#define ESP_WIFI_MODULE_TXD_PIN PA9 // MKS or ESP WIFI RX PIN
#define ESP_WIFI_MODULE_RXD_PIN PA10 // MKS or ESP WIFI TX PIN
#if ENABLED(WIFISUPPORT)
/**
* MKS Robin_Wifi or another ESP8266 module
*
* __ESP(M1)__ -J1-
* GND| 15 | | 08 |+3v3 (22) RXD1 (PA10)
* | 16 | | 07 |MOSI (21) TXD1 (PA9) Active LOW, probably OK to leave floating
* IO2| 17 | | 06 |MISO (19) IO1 (PC7) Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating)
* IO0| 18 | | 05 |CLK (18) IO0 (PA8) Must be HIGH (ESP3D software configures this with a pullup so OK to leave as floating)
* IO1| 19 | | 03 |EN (03) WIFI_EN Must be HIGH for module to run
* | nc | | nc | (01) WIFI_CTRL (PA5)
* RX| 21 | | nc |
* TX| 22 | | 01 |RST
* ￣￣ AE￣￣
*/
// Module ESP-WIFI
#define ESP_WIFI_MODULE_COM 2 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
#define ESP_WIFI_MODULE_RESET_PIN PA5 // WIFI CTRL/RST
#define ESP_WIFI_MODULE_ENABLE_PIN -1
#define ESP_WIFI_MODULE_TXD_PIN PA9 // MKS or ESP WIFI RX PIN
#define ESP_WIFI_MODULE_RXD_PIN PA10 // MKS or ESP WIFI TX PIN
#endif
#endif
//

15
Marlin/src/pins/stm32f1/pins_GTM32_MINI.h
View File

@ -226,10 +226,11 @@
#define SDSS SD_SS_PIN
//
// ESP WiFi can be soldered to J9 connector which is wired to USART2.
// Must define WIFISUPPORT in Configuration.h for the printer.
//
#define ESP_WIFI_MODULE_COM 2
#define ESP_WIFI_MODULE_BAUDRATE 115200
#define ESP_WIFI_MODULE_RESET_PIN -1
#if ENABLED(WIFISUPPORT)
//
// ESP WiFi can be soldered to J9 connector which is wired to USART2.
//
#define ESP_WIFI_MODULE_COM 2
#define ESP_WIFI_MODULE_BAUDRATE 115200
#define ESP_WIFI_MODULE_RESET_PIN -1
#endif

15
Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h
View File

@ -220,10 +220,11 @@
#define SDSS SD_SS_PIN
//
// ESP WiFi can be soldered to J9 connector which is wired to USART2.
// Must define WIFISUPPORT in Configuration.h for the printer.
//
#define ESP_WIFI_MODULE_COM 2
#define ESP_WIFI_MODULE_BAUDRATE 115200
#define ESP_WIFI_MODULE_RESET_PIN -1
#if ENABLED(WIFISUPPORT)
//
// ESP WiFi can be soldered to J9 connector which is wired to USART2.
//
#define ESP_WIFI_MODULE_COM 2
#define ESP_WIFI_MODULE_BAUDRATE 115200
#define ESP_WIFI_MODULE_RESET_PIN -1
#endif

15
Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h
View File

@ -231,10 +231,11 @@
#define SDSS SD_SS_PIN
//
// ESP WiFi can be soldered to J9 connector which is wired to USART2.
// Must define WIFISUPPORT in Configuration.h for the printer.
//
#define ESP_WIFI_MODULE_COM 2
#define ESP_WIFI_MODULE_BAUDRATE 115200
#define ESP_WIFI_MODULE_RESET_PIN -1
#if ENABLED(WIFISUPPORT)
//
// ESP WiFi can be soldered to J9 connector which is wired to USART2.
//
#define ESP_WIFI_MODULE_COM 2
#define ESP_WIFI_MODULE_BAUDRATE 115200
#define ESP_WIFI_MODULE_RESET_PIN -1
#endif

15
Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h
View File

@ -223,10 +223,11 @@
#define SDSS SD_SS_PIN
//
// ESP WiFi can be soldered to J9 connector which is wired to USART2.
// Must define WIFISUPPORT in Configuration.h for the printer.
//
#define ESP_WIFI_MODULE_COM 2
#define ESP_WIFI_MODULE_BAUDRATE 115200
#define ESP_WIFI_MODULE_RESET_PIN -1
#if ENABLED(WIFISUPPORT)
//
// ESP WiFi can be soldered to J9 connector which is wired to USART2.
//
#define ESP_WIFI_MODULE_COM 2
#define ESP_WIFI_MODULE_BAUDRATE 115200
#define ESP_WIFI_MODULE_RESET_PIN -1
#endif

19
Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h
View File

@ -390,15 +390,16 @@
#error "SD CUSTOM_CABLE is not compatible with BTT E3 RRF."
#endif
//
// WIFI
//
#define ESP_WIFI_MODULE_COM 3 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
#define ESP_WIFI_MODULE_RESET_PIN PA4
#define ESP_WIFI_MODULE_ENABLE_PIN PA5
#define ESP_WIFI_MODULE_GPIO0_PIN PA6
#if ENABLED(WIFISUPPORT)
//
// WIFI
//
#define ESP_WIFI_MODULE_COM 3 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
#define ESP_WIFI_MODULE_RESET_PIN PA4
#define ESP_WIFI_MODULE_ENABLE_PIN PA5
#define ESP_WIFI_MODULE_GPIO0_PIN PA6
#endif
#if ENABLED(BTT_E3_RRF_IDEX_BOARD)
#define FPC2_PIN PB11

46
Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_common.h
View File

@ -542,26 +542,28 @@
#define NEOPIXEL_PIN PB0
#endif
//
// WIFI
//
#if ENABLED(WIFISUPPORT)
//
// WIFI
//
/**
* -------
* GND | 9 | | 8 | 3.3V
* (ESP-CS) PB12 | 10 | | 7 | PB15 (ESP-MOSI)
* 3.3V | 11 | | 6 | PB14 (ESP-MISO)
* (ESP-IO0) PD7 | 12 | | 5 | PB13 (ESP-CLK)
* (ESP-IO4) PD10 | 13 | | 4 | --
* -- | 14 | | 3 | PE15 (ESP-EN)
* (ESP-RX) PD8 | 15 | | 2 | --
* (ESP-TX) PD9 | 16 | | 1 | PE14 (ESP-RST)
* -------
* WIFI
*/
#define ESP_WIFI_MODULE_COM 3 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
#define ESP_WIFI_MODULE_RESET_PIN PG7
#define ESP_WIFI_MODULE_ENABLE_PIN PG8
#define ESP_WIFI_MODULE_GPIO0_PIN PD7
#define ESP_WIFI_MODULE_GPIO4_PIN PD10
/**
* -------
* GND | 9 | | 8 | 3.3V
* (ESP-CS) PB12 | 10 | | 7 | PB15 (ESP-MOSI)
* 3.3V | 11 | | 6 | PB14 (ESP-MISO)
* (ESP-IO0) PD7 | 12 | | 5 | PB13 (ESP-CLK)
* (ESP-IO4) PD10 | 13 | | 4 | --
* -- | 14 | | 3 | PE15 (ESP-EN)
* (ESP-RX) PD8 | 15 | | 2 | --
* (ESP-TX) PD9 | 16 | | 1 | PE14 (ESP-RST)
* -------
* WIFI
*/
#define ESP_WIFI_MODULE_COM 3 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
#define ESP_WIFI_MODULE_RESET_PIN PG7
#define ESP_WIFI_MODULE_ENABLE_PIN PG8
#define ESP_WIFI_MODULE_GPIO0_PIN PD7
#define ESP_WIFI_MODULE_GPIO4_PIN PD10
#endif

38
Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h
View File

@ -545,22 +545,24 @@
#endif
#endif
//
// WIFI
//
#if ENABLED(WIFISUPPORT)
//
// WIFI
//
/**
* ------
* RX | 8 7 | 3.3V GPIO0 PF14 ... Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating)
* GPIO0 | 6 5 | Reset GPIO2 PF15 ... must be high (ESP3D software configures this with a pullup so OK to leave as floating)
* GPIO2 | 4 3 | Enable Reset PG0 ... active low, probably OK to leave floating
* GND | 2 1 | TX Enable PG1 ... Must be high for module to run
* ------
* W1
*/
#define ESP_WIFI_MODULE_COM 6 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
#define ESP_WIFI_MODULE_RESET_PIN PG0
#define ESP_WIFI_MODULE_ENABLE_PIN PG1
#define ESP_WIFI_MODULE_GPIO0_PIN PF14
#define ESP_WIFI_MODULE_GPIO2_PIN PF15
/**
* ------
* RX | 8 7 | 3.3V GPIO0 PF14 ... Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating)
* GPIO0 | 6 5 | Reset GPIO2 PF15 ... must be high (ESP3D software configures this with a pullup so OK to leave as floating)
* GPIO2 | 4 3 | Enable Reset PG0 ... active low, probably OK to leave floating
* GND | 2 1 | TX Enable PG1 ... Must be high for module to run
* ------
* W1
*/
#define ESP_WIFI_MODULE_COM 6 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
#define ESP_WIFI_MODULE_RESET_PIN PG0
#define ESP_WIFI_MODULE_ENABLE_PIN PG1
#define ESP_WIFI_MODULE_GPIO0_PIN PF14
#define ESP_WIFI_MODULE_GPIO2_PIN PF15
#endif

44
Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h
View File

@ -554,25 +554,27 @@
#define NEOPIXEL_PIN PE6
#endif
//
// WIFI
//
#if ENABLED(WIFISUPPORT)
//
// WIFI
//
/**
* -------
* GND | 9 | | 8 | 3.3V
* (ESP-CS) PB12 | 10 | | 7 | PB15 (ESP-MOSI)
* 3.3V | 11 | | 6 | PB14 (ESP-MISO)
* (ESP-IO0) PB10 | 12 | | 5 | PB13 (ESP-CLK)
* (ESP-IO4) PB11 | 13 | | 4 | --
* -- | 14 | | 3 | 3.3V (ESP-EN)
* (ESP-RX) PD8 | 15 | | 2 | --
* (ESP-TX) PD9 | 16 | | 1 | PC14 (ESP-RST)
* -------
* WIFI
*/
#define ESP_WIFI_MODULE_COM 3 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
#define ESP_WIFI_MODULE_RESET_PIN PC14
#define ESP_WIFI_MODULE_GPIO0_PIN PB10
#define ESP_WIFI_MODULE_GPIO4_PIN PB11
/**
* -------
* GND | 9 | | 8 | 3.3V
* (ESP-CS) PB12 | 10 | | 7 | PB15 (ESP-MOSI)
* 3.3V | 11 | | 6 | PB14 (ESP-MISO)
* (ESP-IO0) PB10 | 12 | | 5 | PB13 (ESP-CLK)
* (ESP-IO4) PB11 | 13 | | 4 | --
* -- | 14 | | 3 | 3.3V (ESP-EN)
* (ESP-RX) PD8 | 15 | | 2 | --
* (ESP-TX) PD9 | 16 | | 1 | PC14 (ESP-RST)
* -------
* WIFI
*/
#define ESP_WIFI_MODULE_COM 3 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
#define ESP_WIFI_MODULE_RESET_PIN PC14
#define ESP_WIFI_MODULE_GPIO0_PIN PB10
#define ESP_WIFI_MODULE_GPIO4_PIN PB11
#endif

44
Marlin/src/pins/stm32h7/pins_BTT_OCTOPUS_MAX_EZ.h
View File

@ -519,25 +519,27 @@
#define NEOPIXEL2_PIN PE9
#endif
//
// WIFI
//
#if ENABLED(WIFISUPPORT)
//
// WIFI
//
/**
* -------
* GND | 9 | | 8 | 3.3V
* (ESP-CS) PG1 | 10 | | 7 | PB15 (ESP-MOSI)
* 3.3V | 11 | | 6 | PB14 (ESP-MISO)
* (ESP-IO0) PG0 | 12 | | 5 | PB13 (ESP-CLK)
* (ESP-IO4) PF15 | 13 | | 4 | --
* -- | 14 | | 3 | 3.3V (ESP-EN)
* (ESP-RX) PE7 | 15 | | 2 | --
* (ESP-TX) PE8 | 16 | | 1 | PB2 (ESP-RST)
* -------
* WIFI
*/
#define ESP_WIFI_MODULE_COM 7 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
#define ESP_WIFI_MODULE_RESET_PIN PB2
#define ESP_WIFI_MODULE_GPIO0_PIN PG0
#define ESP_WIFI_MODULE_GPIO4_PIN PF15
/**
* -------
* GND | 9 | | 8 | 3.3V
* (ESP-CS) PG1 | 10 | | 7 | PB15 (ESP-MOSI)
* 3.3V | 11 | | 6 | PB14 (ESP-MISO)
* (ESP-IO0) PG0 | 12 | | 5 | PB13 (ESP-CLK)
* (ESP-IO4) PF15 | 13 | | 4 | --
* -- | 14 | | 3 | 3.3V (ESP-EN)
* (ESP-RX) PE7 | 15 | | 2 | --
* (ESP-TX) PE8 | 16 | | 1 | PB2 (ESP-RST)
* -------
* WIFI
*/
#define ESP_WIFI_MODULE_COM 7 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
#define ESP_WIFI_MODULE_RESET_PIN PB2
#define ESP_WIFI_MODULE_GPIO0_PIN PG0
#define ESP_WIFI_MODULE_GPIO4_PIN PF15
#endif

44
Marlin/src/pins/stm32h7/pins_BTT_SKR_V3_0_common.h
View File

@ -541,25 +541,27 @@
#define NEOPIXEL_PIN PE6
#endif
//
// WIFI
//
#if ENABLED(WIFISUPPORT)
//
// WIFI
//
/**
* -------
* GND | 9 | | 8 | 3.3V
* (ESP-CS) PB12 | 10 | | 7 | PB15 (ESP-MOSI)
* 3.3V | 11 | | 6 | PB14 (ESP-MISO)
* (ESP-IO0) PB10 | 12 | | 5 | PB13 (ESP-CLK)
* (ESP-IO4) PB11 | 13 | | 4 | --
* -- | 14 | | 3 | 3.3V (ESP-EN)
* (ESP-RX) PD8 | 15 | | 2 | --
* (ESP-TX) PD9 | 16 | | 1 | PC14 (ESP-RST)
* -------
* WIFI
*/
#define ESP_WIFI_MODULE_COM 3 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
#define ESP_WIFI_MODULE_RESET_PIN PC14
#define ESP_WIFI_MODULE_GPIO0_PIN PB10
#define ESP_WIFI_MODULE_GPIO4_PIN PB11
/**
* -------
* GND | 9 | | 8 | 3.3V
* (ESP-CS) PB12 | 10 | | 7 | PB15 (ESP-MOSI)
* 3.3V | 11 | | 6 | PB14 (ESP-MISO)
* (ESP-IO0) PB10 | 12 | | 5 | PB13 (ESP-CLK)
* (ESP-IO4) PB11 | 13 | | 4 | --
* -- | 14 | | 3 | 3.3V (ESP-EN)
* (ESP-RX) PD8 | 15 | | 2 | --
* (ESP-TX) PD9 | 16 | | 1 | PC14 (ESP-RST)
* -------
* WIFI
*/
#define ESP_WIFI_MODULE_COM 3 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
#define ESP_WIFI_MODULE_RESET_PIN PC14
#define ESP_WIFI_MODULE_GPIO0_PIN PB10
#define ESP_WIFI_MODULE_GPIO4_PIN PB11
#endif