Merge pull request #5696 from thinkyhead/rc_volumetric_default

Allow enabling volumetric filament on config load
2024-11-27 13:56:24 +00:00 · 2017-01-14 05:48:51 -08:00 · 2017-01-14 05:48:51 -08:00 · 9b5515926a
commit 9b5515926a
parent d3cb1a86be 0d147ead66
19 changed files with 168 additions and 2 deletions
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -1085,4 +1085,14 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

+
+/**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */ 
+//#define VOLUMETRIC_DEFAULT_ON
+
 #endif // CONFIGURATION_ADV_H
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@ -388,7 +388,13 @@ int feedrate_percentage = 100, saved_feedrate_percentage,
    flow_percentage[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(100);

 bool axis_relative_modes[] = AXIS_RELATIVE_MODES,
-     volumetric_enabled = false;
+     volumetric_enabled = 
+      #if ENABLED(VOLUMETRIC_DEFAULT_ON)
+        true
+      #else
+        false
+      #endif
+      ;
 float filament_size[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(DEFAULT_NOMINAL_FILAMENT_DIA),
      volumetric_multiplier[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(1.0);

--- a/Marlin/configuration_store.cpp
+++ b/Marlin/configuration_store.cpp
@ -824,7 +824,13 @@ void Config_ResetDefault() {
    retract_recover_feedrate_mm_s = RETRACT_RECOVER_FEEDRATE;
  #endif

-  volumetric_enabled = false;
+  volumetric_enabled =
+  #if ENABLED(VOLUMETRIC_DEFAULT_ON)
+    true
+  #else
+    false
+  #endif
+  ;
  for (uint8_t q = 0; q < COUNT(filament_size); q++)
    filament_size[q] = DEFAULT_NOMINAL_FILAMENT_DIA;

--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@ -1080,4 +1080,13 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

+/**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */ 
+//#define VOLUMETRIC_DEFAULT_ON
+
 #endif // CONFIGURATION_ADV_H
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@ -1085,4 +1085,13 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

+/**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */ 
+//#define VOLUMETRIC_DEFAULT_ON
+
 #endif // CONFIGURATION_ADV_H
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@ -1085,4 +1085,13 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

+/**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */ 
+//#define VOLUMETRIC_DEFAULT_ON
+
 #endif // CONFIGURATION_ADV_H
--- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
@ -1068,4 +1068,13 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

+/**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */ 
+//#define VOLUMETRIC_DEFAULT_ON
+
 #endif // CONFIGURATION_ADV_H
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@ -1093,4 +1093,13 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

+/**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */ 
+//#define VOLUMETRIC_DEFAULT_ON
+
 #endif // CONFIGURATION_ADV_H
--- a/Marlin/example_configurations/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/K8400/Configuration_adv.h
@ -1080,4 +1080,13 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

+/**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */ 
+//#define VOLUMETRIC_DEFAULT_ON
+
 #endif // CONFIGURATION_ADV_H
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@ -1085,4 +1085,13 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

+/**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */ 
+//#define VOLUMETRIC_DEFAULT_ON
+
 #endif // CONFIGURATION_ADV_H
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@ -1085,4 +1085,13 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

+/**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */ 
+//#define VOLUMETRIC_DEFAULT_ON
+
 #endif // CONFIGURATION_ADV_H
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@ -1088,4 +1088,13 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

+/**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */ 
+//#define VOLUMETRIC_DEFAULT_ON
+
 #endif // CONFIGURATION_ADV_H
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@ -1085,4 +1085,13 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

+/**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */ 
+//#define VOLUMETRIC_DEFAULT_ON
+
 #endif // CONFIGURATION_ADV_H
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@ -1087,4 +1087,13 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

+/**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */ 
+//#define VOLUMETRIC_DEFAULT_ON
+
 #endif // CONFIGURATION_ADV_H
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@ -1087,4 +1087,13 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

+/**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */ 
+//#define VOLUMETRIC_DEFAULT_ON
+
 #endif // CONFIGURATION_ADV_H
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@ -1092,4 +1092,13 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

+/**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */ 
+//#define VOLUMETRIC_DEFAULT_ON
+
 #endif // CONFIGURATION_ADV_H
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@ -1087,4 +1087,13 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

+/**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */ 
+//#define VOLUMETRIC_DEFAULT_ON
+
 #endif // CONFIGURATION_ADV_H
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@ -1085,4 +1085,13 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

+/**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */ 
+//#define VOLUMETRIC_DEFAULT_ON
+
 #endif // CONFIGURATION_ADV_H
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@ -1085,4 +1085,13 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

+/**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */ 
+//#define VOLUMETRIC_DEFAULT_ON
+
 #endif // CONFIGURATION_ADV_H