From 9d6b4a2e97a214beeca7fb9e1d6cbd87ff3948e1 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 5 May 2022 11:47:08 -0500 Subject: [PATCH] =?UTF-8?q?=F0=9F=94=A7=20Move=20LASER=5FCOOLANT=5FFLOW=5F?= =?UTF-8?q?METER=20to=20LASER=5FFEATURE?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/Configuration_adv.h | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index ce69f385d2..4218a2cd8c 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -249,20 +249,6 @@ #endif #endif -// -// Laser Coolant Flow Meter -// -//#define LASER_COOLANT_FLOW_METER -#if ENABLED(LASER_COOLANT_FLOW_METER) - #define FLOWMETER_PIN 20 // Requires an external interrupt-enabled pin (e.g., RAMPS 2,3,18,19,20,21) - #define FLOWMETER_PPL 5880 // (pulses/liter) Flow meter pulses-per-liter on the input pin - #define FLOWMETER_INTERVAL 1000 // (ms) Flow rate calculation interval in milliseconds - #define FLOWMETER_SAFETY // Prevent running the laser without the minimum flow rate set below - #if ENABLED(FLOWMETER_SAFETY) - #define FLOWMETER_MIN_LITERS_PER_MINUTE 1.5 // (liters/min) Minimum flow required when enabled - #endif -#endif - /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which @@ -3766,6 +3752,20 @@ #define I2C_AMMETER_SHUNT_RESISTOR 0.1 // (Ohms) Calibration shunt resistor value #endif + // + // Laser Coolant Flow Meter + // + //#define LASER_COOLANT_FLOW_METER + #if ENABLED(LASER_COOLANT_FLOW_METER) + #define FLOWMETER_PIN 20 // Requires an external interrupt-enabled pin (e.g., RAMPS 2,3,18,19,20,21) + #define FLOWMETER_PPL 5880 // (pulses/liter) Flow meter pulses-per-liter on the input pin + #define FLOWMETER_INTERVAL 1000 // (ms) Flow rate calculation interval in milliseconds + #define FLOWMETER_SAFETY // Prevent running the laser without the minimum flow rate set below + #if ENABLED(FLOWMETER_SAFETY) + #define FLOWMETER_MIN_LITERS_PER_MINUTE 1.5 // (liters/min) Minimum flow required when enabled + #endif + #endif + #endif #endif // SPINDLE_FEATURE || LASER_FEATURE