diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 742cf8f236..fbdb807d33 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -466,7 +466,7 @@ #define BOARD_BTT_SKR_SE_BX_V3 6005 // BigTreeTech SKR SE BX V3.0 (STM32H743II) #define BOARD_BTT_SKR_V3_0 6006 // BigTreeTech SKR V3.0 (STM32H743VG) #define BOARD_BTT_SKR_V3_0_EZ 6007 // BigTreeTech SKR V3.0 EZ (STM32H743VG) -#define BOARD_BTT_OCTOPUS_MAX_EZ_V1_0 6008 // BigTreeTech Octopus Max EZ V1.0 (STM32H723VE / STM32H723ZE) +#define BOARD_BTT_OCTOPUS_MAX_EZ_V1_0 6008 // BigTreeTech Octopus Max EZ V1.0 (STM32H723ZE) // // Espressif ESP32 WiFi diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 0ae0312dae..d4ec9f22c0 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -540,32 +540,32 @@ #elif MB(MALYAN_M200_V2) #include "stm32f0/pins_MALYAN_M200_V2.h" // STM32F0 env:STM32F070RB_malyan env:STM32F070CB_malyan #elif MB(MALYAN_M300) - #include "stm32f0/pins_MALYAN_M300.h" // STM32F070 env:malyan_M300 + #include "stm32f0/pins_MALYAN_M300.h" // STM32F0 env:malyan_M300 // // STM32 ARM Cortex-M3 // #elif MB(STM32F103RE) - #include "stm32f1/pins_STM32F1R.h" // STM32F103RE env:STM32F103RE env:STM32F103RE_maple + #include "stm32f1/pins_STM32F1R.h" // STM32F1 env:STM32F103RE env:STM32F103RE_maple #elif MB(MALYAN_M200) - #include "stm32f1/pins_MALYAN_M200.h" // STM32F103CB env:STM32F103CB_malyan env:STM32F103CB_malyan_maple + #include "stm32f1/pins_MALYAN_M200.h" // STM32F1 env:STM32F103CB_malyan env:STM32F103CB_malyan_maple #elif MB(STM3R_MINI) - #include "stm32f1/pins_STM3R_MINI.h" // STM32F103VE? env:STM32F103VE env:STM32F103RE_maple + #include "stm32f1/pins_STM3R_MINI.h" // STM32F1 env:STM32F103VE env:STM32F103RE_maple #elif MB(GTM32_PRO_VB) - #include "stm32f1/pins_GTM32_PRO_VB.h" // STM32F103VE env:STM32F103VE env:STM32F103VE_GTM32_maple + #include "stm32f1/pins_GTM32_PRO_VB.h" // STM32F1 env:STM32F103VE env:STM32F103VE_GTM32_maple #elif MB(GTM32_PRO_VD) - #include "stm32f1/pins_GTM32_PRO_VD.h" // STM32F103VE env:STM32F103VE env:STM32F103VE_GTM32_maple + #include "stm32f1/pins_GTM32_PRO_VD.h" // STM32F1 env:STM32F103VE env:STM32F103VE_GTM32_maple #elif MB(GTM32_MINI) - #include "stm32f1/pins_GTM32_MINI.h" // STM32F103VE env:STM32F103VE env:STM32F103VE_GTM32_maple + #include "stm32f1/pins_GTM32_MINI.h" // STM32F1 env:STM32F103VE env:STM32F103VE_GTM32_maple #elif MB(GTM32_MINI_A30) - #include "stm32f1/pins_GTM32_MINI_A30.h" // STM32F103VE env:STM32F103VE env:STM32F103VE_GTM32_maple + #include "stm32f1/pins_GTM32_MINI_A30.h" // STM32F1 env:STM32F103VE env:STM32F103VE_GTM32_maple #elif MB(GTM32_REV_B) - #include "stm32f1/pins_GTM32_REV_B.h" // STM32F103VE env:STM32F103VE env:STM32F103VE_GTM32_maple + #include "stm32f1/pins_GTM32_REV_B.h" // STM32F1 env:STM32F103VE env:STM32F103VE_GTM32_maple #elif MB(MORPHEUS) - #include "stm32f1/pins_MORPHEUS.h" // STM32F103RE env:STM32F103RE env:STM32F103RE_maple + #include "stm32f1/pins_MORPHEUS.h" // STM32F1 env:STM32F103RE env:STM32F103RE_maple #elif MB(CHITU3D) - #include "stm32f1/pins_CHITU3D.h" // STM32F103ZE env:STM32F103ZE env:STM32F103RE_maple + #include "stm32f1/pins_CHITU3D.h" // STM32F1 env:STM32F103ZE env:STM32F103RE_maple #elif MB(MKS_ROBIN) #include "stm32f1/pins_MKS_ROBIN.h" // STM32F1 env:mks_robin env:mks_robin_maple #elif MB(MKS_ROBIN_MINI) @@ -663,7 +663,7 @@ #elif MB(CREALITY_V25S1) #include "stm32f1/pins_CREALITY_V25S1.h" // STM32F1 env:STM32F103RE_creality_smartPro env:STM32F103RE_creality_smartPro_maple #elif MB(CREALITY_V521) - #include "stm32f1/pins_CREALITY_V521.h" // STM32F103VE env:STM32F103VE_creality + #include "stm32f1/pins_CREALITY_V521.h" // STM32F1 env:STM32F103VE_creality #elif MB(TRIGORILLA_PRO) #include "stm32f1/pins_TRIGORILLA_PRO.h" // STM32F1 env:trigorilla_pro env:trigorilla_pro_maple env:trigorilla_pro_disk #elif MB(FLY_MINI) @@ -671,7 +671,7 @@ #elif MB(FLSUN_HISPEED) #include "stm32f1/pins_FLSUN_HISPEED.h" // STM32F1 env:flsun_hispeedv1 #elif MB(BEAST) - #include "stm32f1/pins_BEAST.h" // STM32F103VE? env:STM32F103VE env:STM32F103RE_maple + #include "stm32f1/pins_BEAST.h" // STM32F1 env:STM32F103VE env:STM32F103RE_maple #elif MB(MINGDA_MPX_ARM_MINI) #include "stm32f1/pins_MINGDA_MPX_ARM_MINI.h" // STM32F1 env:mingda_mpx_arm_mini #elif MB(ZONESTAR_ZM3E2) @@ -681,13 +681,13 @@ #elif MB(ZONESTAR_ZM3E4V2) #include "stm32f1/pins_ZM3E4_V2_0.h" // STM32F1 env:STM32F103VE_ZM3E4V2_USB env:STM32F103VE_ZM3E4V2_USB_maple #elif MB(ERYONE_ERY32_MINI) - #include "stm32f1/pins_ERYONE_ERY32_MINI.h" // STM32F103VET6 env:ERYONE_ERY32_MINI_maple + #include "stm32f1/pins_ERYONE_ERY32_MINI.h" // STM32F1 env:ERYONE_ERY32_MINI_maple #elif MB(PANDA_PI_V29) - #include "stm32f1/pins_PANDA_PI_V29.h" // STM32F103RCT6 env:PANDA_PI_V29 + #include "stm32f1/pins_PANDA_PI_V29.h" // STM32F1 env:PANDA_PI_V29 #elif MB(SOVOL_V131) #include "gd32f1/pins_SOVOL_V131.h" // GD32F1 env:GD32F103RET6_sovol_maple #elif MB(TRIGORILLA_V006) - #include "gd32f1/pins_TRIGORILLA_V006.h" // GD32F103 env:trigorilla_v006 + #include "gd32f1/pins_TRIGORILLA_V006.h" // GD32F1 env:trigorilla_v006 #elif MB(KEDI_CONTROLLER_V1_2) #include "stm32f1/pins_KEDI_CONTROLLER_V1_2.h" // STM32F1 env:STM32F103RC_btt env:STM32F103RC_btt_USB env:STM32F103RC_btt_maple env:STM32F103RC_btt_USB_maple @@ -733,7 +733,7 @@ #elif MB(BTT_OCTOPUS_V1_1) #include "stm32f4/pins_BTT_OCTOPUS_V1_1.h" // STM32F4 env:STM32F446ZE_btt env:STM32F446ZE_btt_USB env:STM32F429ZG_btt env:STM32F429ZG_btt_USB env:STM32F407ZE_btt env:STM32F407ZE_btt_USB #elif MB(BTT_OCTOPUS_PRO_V1_0) - #include "stm32f4/pins_BTT_OCTOPUS_PRO_V1_0.h" // STM32F4 env:STM32F446ZE_btt env:STM32F446ZE_btt_USB env:STM32F429ZG_btt env:STM32F429ZG_btt_USB env:STM32H723Zx_btt + #include "stm32f4/pins_BTT_OCTOPUS_PRO_V1_0.h" // STM32F4 env:STM32F446ZE_btt env:STM32F446ZE_btt_USB env:STM32F429ZG_btt env:STM32F429ZG_btt_USB env:STM32H723ZE_btt #elif MB(LERDGE_K) #include "stm32f4/pins_LERDGE_K.h" // STM32F4 env:LERDGEK env:LERDGEK_usb_flash_drive #elif MB(LERDGE_S) @@ -810,11 +810,11 @@ #elif MB(BTT_SKR_SE_BX_V3) #include "stm32h7/pins_BTT_SKR_SE_BX_V3.h" // STM32H7 env:BTT_SKR_SE_BX #elif MB(BTT_SKR_V3_0) - #include "stm32h7/pins_BTT_SKR_V3_0.h" // STM32H743Vx/STM32H723VG env:STM32H743Vx_btt env:STM32H723VG_btt + #include "stm32h7/pins_BTT_SKR_V3_0.h" // STM32H7 env:STM32H743VI_btt env:STM32H723VG_btt #elif MB(BTT_SKR_V3_0_EZ) - #include "stm32h7/pins_BTT_SKR_V3_0_EZ.h" // STM32H743Vx/STM32H723VG env:STM32H743Vx_btt env:STM32H723VG_btt + #include "stm32h7/pins_BTT_SKR_V3_0_EZ.h" // STM32H7 env:STM32H743VI_btt env:STM32H723VG_btt #elif MB(BTT_OCTOPUS_MAX_EZ_V1_0) - #include "stm32h7/pins_BTT_OCTOPUS_MAX_EZ.h" // STM32H723Zx/STM32H723VE env:STM32H723Zx_btt env:STM32H723VE_btt + #include "stm32h7/pins_BTT_OCTOPUS_MAX_EZ.h" // STM32H7 env:STM32H723ZE_btt #elif MB(TEENSY41) #include "teensy4/pins_TEENSY41.h" // Teensy-4.x env:teensy41 #elif MB(T41U5XBB) diff --git a/buildroot/share/PlatformIO/boards/marlin_CREALITY_STM32F401RC.json b/buildroot/share/PlatformIO/boards/marlin_CREALITY_STM32F401RC.json deleted file mode 100644 index 82f49fa815..0000000000 --- a/buildroot/share/PlatformIO/boards/marlin_CREALITY_STM32F401RC.json +++ /dev/null @@ -1,65 +0,0 @@ -{ - "build": { - "core": "stm32", - "cpu": "cortex-m4", - "extra_flags": "-DSTM32F401xx", - "f_cpu": "84000000L", - "hwids": [ - [ - "0x1EAF", - "0x0003" - ], - [ - "0x0483", - "0x3748" - ] - ], - "ldscript": "ldscript.ld", - "mcu": "stm32f401rct6", - "variant": "MARLIN_CREALITY_STM32F401RC" - }, - "debug": { - "jlink_device": "STM32F401RC", - "openocd_target": "stm32f4x", - "svd_path": "STM32F40x.svd", - "tools": { - "stlink": { - "server": { - "arguments": [ - "-f", - "scripts/interface/stlink.cfg", - "-c", - "transport select hla_swd", - "-f", - "scripts/target/stm32f4x.cfg", - "-c", - "reset_config none" - ], - "executable": "bin/openocd", - "package": "tool-openocd" - } - } - } - }, - "frameworks": [ - "arduino", - "stm32cube" - ], - "name": "STM32F401RC (64k RAM. 256k Flash)", - "upload": { - "disable_flushing": false, - "maximum_ram_size": 65536, - "maximum_size": 262144, - "protocol": "stlink", - "protocols": [ - "stlink", - "dfu", - "jlink" - ], - "require_upload_port": true, - "use_1200bps_touch": false, - "wait_for_upload_port": false - }, - "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f401rc.html", - "vendor": "Generic" -} diff --git a/buildroot/share/PlatformIO/boards/marlin_STM32H723VE.json b/buildroot/share/PlatformIO/boards/marlin_STM32H723VE.json deleted file mode 100644 index 3941b3d00a..0000000000 --- a/buildroot/share/PlatformIO/boards/marlin_STM32H723VE.json +++ /dev/null @@ -1,61 +0,0 @@ -{ - "build": { - "core": "stm32", - "cpu": "cortex-m7", - "extra_flags": "-DSTM32H7xx -DSTM32H723xx", - "f_cpu": "550000000L", - "mcu": "stm32h723vet6", - "product_line": "STM32H723xx", - "variant": "MARLIN_H723VE" - }, - "connectivity": [ - "can", - "ethernet" - ], - "debug": { - "jlink_device": "STM32H723VE", - "openocd_target": "stm32h7x", - "svd_path": "STM32H7x3.svd", - "tools": { - "stlink": { - "server": { - "arguments": [ - "-f", - "scripts/interface/stlink.cfg", - "-c", - "transport select hla_swd", - "-f", - "scripts/target/stm32h7x.cfg", - "-c", - "reset_config none" - ], - "executable": "bin/openocd", - "package": "tool-openocd" - } - } - } - }, - "frameworks": [ - "arduino", - "stm32cube" - ], - "name": "STM32H723VE (564k RAM. 512k Flash)", - "upload": { - "disable_flushing": false, - "maximum_ram_size": 577536, - "maximum_size": 524288, - "protocol": "stlink", - "protocols": [ - "stlink", - "dfu", - "jlink", - "cmsis-dap" - ], - "offset_address": "0x8020000", - "require_upload_port": true, - "use_1200bps_touch": false, - "wait_for_upload_port": false - }, - "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32h723ve.html", - "vendor": "ST" -} diff --git a/buildroot/share/PlatformIO/boards/marlin_STM32H723Zx.json b/buildroot/share/PlatformIO/boards/marlin_STM32H723ZE.json similarity index 100% rename from buildroot/share/PlatformIO/boards/marlin_STM32H723Zx.json rename to buildroot/share/PlatformIO/boards/marlin_STM32H723ZE.json diff --git a/buildroot/share/PlatformIO/boards/marlin_STM32H743Vx.json b/buildroot/share/PlatformIO/boards/marlin_STM32H743VI.json similarity index 100% rename from buildroot/share/PlatformIO/boards/marlin_STM32H743Vx.json rename to buildroot/share/PlatformIO/boards/marlin_STM32H743VI.json diff --git a/buildroot/share/PlatformIO/variants/MARLIN_H723VE/PeripheralPins.c b/buildroot/share/PlatformIO/variants/MARLIN_H723VE/PeripheralPins.c deleted file mode 100644 index e484edd1ad..0000000000 --- a/buildroot/share/PlatformIO/variants/MARLIN_H723VE/PeripheralPins.c +++ /dev/null @@ -1,590 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2020, STMicroelectronics - * All rights reserved. - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ******************************************************************************* - */ -/* - * Automatically generated from STM32H723VEHx.xml, STM32H723VETx.xml - * STM32H723VGHx.xml, STM32H723VGTx.xml - * STM32H730VBHx.xml, STM32H730VBTx.xml - * STM32H733VGHx.xml, STM32H733VGTx.xml - * CubeMX DB release 6.0.60 - */ -#if !defined(CUSTOM_PERIPHERAL_PINS) -#include "Arduino.h" -#include "PeripheralPins.h" - -/* ===== - * Notes: - * - The pins mentioned Px_y_ALTz are alternative possibilities which use other - * HW peripheral instances. You can use them the same way as any other "normal" - * pin (i.e. analogWrite(PA7_ALT1, 128);). - * - * - Commented lines are alternative possibilities which are not used per default. - * If you change them, you will have to know what you do - * ===== - */ - -//*** ADC *** - -#ifdef HAL_ADC_MODULE_ENABLED -WEAK const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_INP16 - {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // ADC1_INP17 - {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_INP14 - {PA_2_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_INP14 - {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_INP15 - {PA_3_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_INP15 - {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC1_INP18 - {PA_4_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC2_INP18 - {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 19, 0)}, // ADC1_INP19 - {PA_5_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 19, 0)}, // ADC2_INP19 - {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_INP3 - {PA_6_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_INP3 - {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_INP7 - {PA_7_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_INP7 - {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_INP9 - {PB_0_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_INP9 - {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_INP5 - {PB_1_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_INP5 - {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_INP10 - {PC_0_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_INP10 - {PC_0_ALT2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC3_INP10 - {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_INP11 - {PC_1_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_INP11 - {PC_1_ALT2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC3_INP11 - {PC_2_C, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_INP0 - {PC_3_C, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_INP1 - {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_INP4 - {PC_4_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_INP4 - {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_INP8 - {PC_5_ALT1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_INP8 - {NC, NP, 0} -}; -#endif - -//*** DAC *** - -#ifdef HAL_DAC_MODULE_ENABLED -WEAK const PinMap PinMap_DAC[] = { - {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1 - {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC1_OUT2 - {NC, NP, 0} -}; -#endif - -//*** I2C *** - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SDA[] = { - {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_7_ALT1, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)}, - {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_9_ALT1, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)}, - {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - {PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, - {PC_9_ALT1, I2C5, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C5)}, - {PC_10, I2C5, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C5)}, - {PD_13, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SCL[] = { - {PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, - {PA_8_ALT1, I2C5, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C5)}, - {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_6_ALT1, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)}, - {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_8_ALT1, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)}, - {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - {PC_11, I2C5, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C5)}, - {PD_12, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)}, - {NC, NP, 0} -}; -#endif - -//*** TIM *** - -#ifdef HAL_TIM_MODULE_ENABLED -WEAK const PinMap PinMap_TIM[] = { - {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - {PA_0_ALT1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 - {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - {PA_1_ALT1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 - {PA_1_ALT2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 1)}, // TIM15_CH1N - {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - {PA_2_ALT1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 - {PA_2_ALT2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 0)}, // TIM15_CH1 - {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - {PA_3_ALT1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 - {PA_3_ALT2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 2, 0)}, // TIM15_CH2 - {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - {PA_5_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N - {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - {PA_6_ALT1, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 - {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - {PA_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - {PA_7_ALT2, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N - {PA_7_ALT3, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 - {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 - {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 - {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 - {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 - {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N - {PB_0_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 - {PB_0_ALT2, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N - {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N - {PB_1_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 - {PB_1_ALT2, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N - {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - {PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - {PB_6_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N - {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 - {PB_7_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N - {PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 - {PB_8_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 - {PB_9_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1 - {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N - {PB_14_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N - {PB_14_ALT2, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM12, 1, 0)}, // TIM12_CH1 - {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N - {PB_15_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N - {PB_15_ALT2, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM12, 2, 0)}, // TIM12_CH2 - {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - {PC_6_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1 - {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - {PC_7_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2 - {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 - {PC_8_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3 - {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 - {PC_9_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4 - {PC_12, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15, 1, 0)}, // TIM15_CH1 - {PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - {PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 - {PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 - {PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 - {PE_4, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 1)}, // TIM15_CH1N - {PE_5, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 0)}, // TIM15_CH1 - {PE_6, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 2, 0)}, // TIM15_CH2 - {PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - {PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 - {PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N - {PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 - {PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N - {PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 - {PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 - {NC, NP, 0} -}; -#endif - -//*** UART *** - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_TX[] = { - {PA_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, - {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_9, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, - {PA_9_ALT1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PA_12, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_UART4)}, - {PA_15, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)}, - {PB_4, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)}, - {PB_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART)}, - {PB_6_ALT1, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)}, - {PB_6_ALT2, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_9, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, - {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PB_13, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)}, - {PB_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, - {PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)}, - {PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, - {PC_10_ALT1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, - {PD_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, - {PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PD_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PD_15, UART9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART9)}, - {PE_1, UART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)}, - {PE_3, USART10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_USART10)}, - {PE_8, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RX[] = { - {PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, - {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_8, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)}, - {PA_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, - {PA_10_ALT1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PA_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_UART4)}, - {PB_3, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)}, - {PB_5, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)}, - {PB_7, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART)}, - {PB_7_ALT1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_8, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, - {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PB_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)}, - {PB_15, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, - {PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)}, - {PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, - {PC_11_ALT1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PD_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, - {PD_2, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, - {PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PD_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PD_14, UART9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART9)}, - {PE_0, UART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)}, - {PE_2, USART10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART10)}, - {PE_7, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RTS[] = { - {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, - {PA_12_ALT1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PA_15, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, - {PB_14, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, - {PB_14_ALT1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PC_8, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, - {PD_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PD_12, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PD_13, UART9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART9)}, - {PD_15, UART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)}, - {PE_9, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_CTS[] = { - {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_11, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, - {PA_11_ALT1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, - {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PB_15, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, - {PC_9, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, - {PD_0, UART9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART9)}, - {PD_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PD_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PD_14, UART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)}, - {PE_10, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)}, - {NC, NP, 0} -}; -#endif - -//*** SPI *** - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MOSI[] = { - {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PA_7_ALT1, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)}, - {PB_2, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI3)}, - {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_5_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI3)}, - {PB_5_ALT2, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)}, - {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PC_1, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PC_3_C, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PD_6, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI3)}, - {PD_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PE_6, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, - {PE_14, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MISO[] = { - {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PA_6_ALT1, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)}, - {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_4_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_4_ALT2, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)}, - {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PC_2_C, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PE_5, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, - {PE_13, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SCLK[] = { - {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PA_5_ALT1, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)}, - {PA_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PA_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_3_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_3_ALT2, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)}, - {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PC_12, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)}, - {PD_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PE_2, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, - {PE_12, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SSEL[] = { - {PA_0, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)}, - {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PA_4_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PA_4_ALT2, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)}, - {PA_11, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PA_15_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PA_15_ALT2, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI6)}, - {PB_4, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI2)}, - {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PE_4, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, - {PE_11, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, - {NC, NP, 0} -}; -#endif - -//*** FDCAN *** - -#ifdef HAL_FDCAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_RD[] = { - {PA_11, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)}, - {PB_5, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)}, - {PB_8, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)}, - {PB_12, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)}, - {PD_0, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)}, - {PD_12, FDCAN3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_FDCAN3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_FDCAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_TD[] = { - {PA_12, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)}, - {PB_6, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)}, - {PB_9, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)}, - {PB_13, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)}, - {PD_1, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)}, - {PD_13, FDCAN3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_FDCAN3)}, - {NC, NP, 0} -}; -#endif - -//*** ETHERNET *** - -#if defined(HAL_ETH_MODULE_ENABLED) || defined(HAL_ETH_LEGACY_MODULE_ENABLED) -WEAK const PinMap PinMap_Ethernet[] = { - {PA_0, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS - {PA_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_REF_CLK - {PA_1_ALT1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RX_CLK - {PA_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_MDIO - {PA_3, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_COL - {PA_7, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS_DV - {PA_7_ALT1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RX_DV - {PA_9, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_ER - {PB_0, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD2 - {PB_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD3 - {PB_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_ER - {PB_5, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_PPS_OUT - {PB_8, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD3 - {PB_10, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RX_ER - {PB_11, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_EN - {PB_12, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD0 - {PB_13, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD1 - {PC_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_MDC - {PC_2_C, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD2 - {PC_3_C, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_CLK - {PC_4, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD0 - {PC_5, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD1 - {PE_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD3 - {NC, NP, 0} -}; -#endif - -//*** OCTOSPI *** - -#ifdef HAL_OSPI_MODULE_ENABLED -WEAK const PinMap PinMap_OCTOSPI_DATA0[] = { - {PA_2, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0 - {PB_1, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0 - {PB_12, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0 - {PC_3_C, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0 - {PC_9, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0 - {PD_11, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO0 - {NC, NP, 0} -}; -#endif - -#ifdef HAL_OSPI_MODULE_ENABLED -WEAK const PinMap PinMap_OCTOSPI_DATA1[] = { - {PB_0, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO1 - {PC_10, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO1 - {PD_12, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO1 - {NC, NP, 0} -}; -#endif - -#ifdef HAL_OSPI_MODULE_ENABLED -WEAK const PinMap PinMap_OCTOSPI_DATA2[] = { - {PA_3, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2 - {PA_7, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2 - {PB_13, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2 - {PC_2_C, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2 - {PE_2, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO2 - {NC, NP, 0} -}; -#endif - -#ifdef HAL_OSPI_MODULE_ENABLED -WEAK const PinMap PinMap_OCTOSPI_DATA3[] = { - {PA_1, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO3 - {PA_6, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO3 - {PD_13, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO3 - {NC, NP, 0} -}; -#endif - -#ifdef HAL_OSPI_MODULE_ENABLED -WEAK const PinMap PinMap_OCTOSPI_DATA4[] = { - {PC_1, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO4 - {PD_4, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO4 - {PE_7, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO4 - {NC, NP, 0} -}; -#endif - -#ifdef HAL_OSPI_MODULE_ENABLED -WEAK const PinMap PinMap_OCTOSPI_DATA5[] = { - {PC_2_C, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO5 - {PD_5, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO5 - {PE_8, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO5 - {NC, NP, 0} -}; -#endif - -#ifdef HAL_OSPI_MODULE_ENABLED -WEAK const PinMap PinMap_OCTOSPI_DATA6[] = { - {PC_3_C, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO6 - {PD_6, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO6 - {PE_9, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO6 - {NC, NP, 0} -}; -#endif - -#ifdef HAL_OSPI_MODULE_ENABLED -WEAK const PinMap PinMap_OCTOSPI_DATA7[] = { - {PD_7, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO7 - {PE_10, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_IO7 - {NC, NP, 0} -}; -#endif - -#ifdef HAL_OSPI_MODULE_ENABLED -WEAK const PinMap PinMap_OCTOSPI_SCLK[] = { - {PA_3, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OCTOSPIM_P1)}, // OCTOSPIM_P1_CLK - {PB_2, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_CLK - {NC, NP, 0} -}; -#endif - -#ifdef HAL_OSPI_MODULE_ENABLED -WEAK const PinMap PinMap_OCTOSPI_SSEL[] = { - {PB_6, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS - {PB_10, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS - {PC_11, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS - {PE_11, OCTOSPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_OCTOSPIM_P1)}, // OCTOSPIM_P1_NCS - {NC, NP, 0} -}; -#endif - -//*** USB *** - -#if defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED) -WEAK const PinMap PinMap_USB_OTG_HS[] = { -#ifdef USE_USB_HS_IN_FS - {PA_8, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_SOF - {PA_9, USB_OTG_HS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_HS_VBUS - {PA_10, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ID - {PA_11, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)}, // USB_OTG_HS_DM - {PA_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)}, // USB_OTG_HS_DP -#else - {PA_3, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D0 - {PA_5, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_CK - {PB_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D1 - {PB_1, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D2 - {PB_5, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D7 - {PB_10, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D3 - {PB_11, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D4 - {PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D5 - {PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_D6 - {PC_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_STP - {PC_2_C, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_DIR - {PC_3_C, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_HS)}, // USB_OTG_HS_ULPI_NXT -#endif /* USE_USB_HS_IN_FS */ - {NC, NP, 0} -}; -#endif - -//*** SD *** - -#ifdef HAL_SD_MODULE_ENABLED -WEAK const PinMap PinMap_SD[] = { - {PA_0, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_SDMMC2)}, // SDMMC2_CMD - {PB_3, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SDMMC2)}, // SDMMC2_D2 - {PB_4, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SDMMC2)}, // SDMMC2_D3 - {PB_8, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SDMMC1)}, // SDMMC1_CKIN - {PB_8_ALT1, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D4 - {PB_8_ALT2, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SDMMC2)}, // SDMMC2_D4 - {PB_9, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SDMMC1)}, // SDMMC1_CDIR - {PB_9_ALT1, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D5 - {PB_9_ALT2, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SDMMC2)}, // SDMMC2_D5 - {PB_13, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D0 - {PB_14, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SDMMC2)}, // SDMMC2_D0 - {PB_15, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SDMMC2)}, // SDMMC2_D1 - {PC_1, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_SDMMC2)}, // SDMMC2_CK - {PC_4, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_SDMMC2)}, // SDMMC2_CKIN - {PC_6, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SDMMC1)}, // SDMMC1_D0DIR - {PC_6_ALT1, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D6 - {PC_6_ALT2, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SDMMC2)}, // SDMMC2_D6 - {PC_7, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SDMMC1)}, // SDMMC1_D123DIR - {PC_7_ALT1, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D7 - {PC_7_ALT2, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SDMMC2)}, // SDMMC2_D7 - {PC_8, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D0 - {PC_9, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D1 - {PC_10, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D2 - {PC_11, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D3 - {PC_12, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDMMC1)}, // SDMMC1_CK - {PD_2, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDMMC1)}, // SDMMC1_CMD - {PD_6, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF11_SDMMC2)}, // SDMMC2_CK - {PD_7, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF11_SDMMC2)}, // SDMMC2_CMD - {NC, NP, 0} -}; -#endif - -#endif /* !CUSTOM_PERIPHERAL_PINS */ diff --git a/buildroot/share/PlatformIO/variants/MARLIN_H723VE/PinNamesVar.h b/buildroot/share/PlatformIO/variants/MARLIN_H723VE/PinNamesVar.h deleted file mode 100644 index 3bd0ed8fcd..0000000000 --- a/buildroot/share/PlatformIO/variants/MARLIN_H723VE/PinNamesVar.h +++ /dev/null @@ -1,108 +0,0 @@ -/* Dual pad pin name */ -PC_2_C = PC_2 | PDUAL, -PC_3_C = PC_3 | PDUAL, - -/* Alternate pin name */ -PA_0_ALT1 = PA_0 | ALT1, -PA_1_ALT1 = PA_1 | ALT1, -PA_1_ALT2 = PA_1 | ALT2, -PA_2_ALT1 = PA_2 | ALT1, -PA_2_ALT2 = PA_2 | ALT2, -PA_3_ALT1 = PA_3 | ALT1, -PA_3_ALT2 = PA_3 | ALT2, -PA_4_ALT1 = PA_4 | ALT1, -PA_4_ALT2 = PA_4 | ALT2, -PA_5_ALT1 = PA_5 | ALT1, -PA_6_ALT1 = PA_6 | ALT1, -PA_7_ALT1 = PA_7 | ALT1, -PA_7_ALT2 = PA_7 | ALT2, -PA_7_ALT3 = PA_7 | ALT3, -PA_8_ALT1 = PA_8 | ALT1, -PA_9_ALT1 = PA_9 | ALT1, -PA_10_ALT1 = PA_10 | ALT1, -PA_11_ALT1 = PA_11 | ALT1, -PA_12_ALT1 = PA_12 | ALT1, -PA_15_ALT1 = PA_15 | ALT1, -PA_15_ALT2 = PA_15 | ALT2, -PB_0_ALT1 = PB_0 | ALT1, -PB_0_ALT2 = PB_0 | ALT2, -PB_1_ALT1 = PB_1 | ALT1, -PB_1_ALT2 = PB_1 | ALT2, -PB_3_ALT1 = PB_3 | ALT1, -PB_3_ALT2 = PB_3 | ALT2, -PB_4_ALT1 = PB_4 | ALT1, -PB_4_ALT2 = PB_4 | ALT2, -PB_5_ALT1 = PB_5 | ALT1, -PB_5_ALT2 = PB_5 | ALT2, -PB_6_ALT1 = PB_6 | ALT1, -PB_6_ALT2 = PB_6 | ALT2, -PB_7_ALT1 = PB_7 | ALT1, -PB_8_ALT1 = PB_8 | ALT1, -PB_8_ALT2 = PB_8 | ALT2, -PB_9_ALT1 = PB_9 | ALT1, -PB_9_ALT2 = PB_9 | ALT2, -PB_14_ALT1 = PB_14 | ALT1, -PB_14_ALT2 = PB_14 | ALT2, -PB_15_ALT1 = PB_15 | ALT1, -PB_15_ALT2 = PB_15 | ALT2, -PC_0_ALT1 = PC_0 | ALT1, -PC_0_ALT2 = PC_0 | ALT2, -PC_1_ALT1 = PC_1 | ALT1, -PC_1_ALT2 = PC_1 | ALT2, -PC_4_ALT1 = PC_4 | ALT1, -PC_5_ALT1 = PC_5 | ALT1, -PC_6_ALT1 = PC_6 | ALT1, -PC_6_ALT2 = PC_6 | ALT2, -PC_7_ALT1 = PC_7 | ALT1, -PC_7_ALT2 = PC_7 | ALT2, -PC_8_ALT1 = PC_8 | ALT1, -PC_9_ALT1 = PC_9 | ALT1, -PC_10_ALT1 = PC_10 | ALT1, -PC_11_ALT1 = PC_11 | ALT1, - -/* SYS_WKUP */ -#ifdef PWR_WAKEUP_PIN1 - SYS_WKUP1 = PA_0, -#endif -#ifdef PWR_WAKEUP_PIN2 - SYS_WKUP2 = PA_2, -#endif -#ifdef PWR_WAKEUP_PIN3 - SYS_WKUP3 = NC, -#endif -#ifdef PWR_WAKEUP_PIN4 - SYS_WKUP4 = PC_13, -#endif -#ifdef PWR_WAKEUP_PIN5 - SYS_WKUP5 = NC, -#endif -#ifdef PWR_WAKEUP_PIN6 - SYS_WKUP6 = PC_1, -#endif -#ifdef PWR_WAKEUP_PIN7 - SYS_WKUP7 = NC, -#endif -#ifdef PWR_WAKEUP_PIN8 - SYS_WKUP8 = NC, -#endif - -/* USB */ -#ifdef USBCON - USB_OTG_HS_DM = PA_11, - USB_OTG_HS_DP = PA_12, - USB_OTG_HS_ID = PA_10, - USB_OTG_HS_SOF = PA_8, - USB_OTG_HS_ULPI_CK = PA_5, - USB_OTG_HS_ULPI_D0 = PA_3, - USB_OTG_HS_ULPI_D1 = PB_0, - USB_OTG_HS_ULPI_D2 = PB_1, - USB_OTG_HS_ULPI_D3 = PB_10, - USB_OTG_HS_ULPI_D4 = PB_11, - USB_OTG_HS_ULPI_D5 = PB_12, - USB_OTG_HS_ULPI_D6 = PB_13, - USB_OTG_HS_ULPI_D7 = PB_5, - USB_OTG_HS_ULPI_DIR = PC_2_C, - USB_OTG_HS_ULPI_NXT = PC_3_C, - USB_OTG_HS_ULPI_STP = PC_0, - USB_OTG_HS_VBUS = PA_9, -#endif diff --git a/buildroot/share/PlatformIO/variants/MARLIN_H723VE/ldscript.ld b/buildroot/share/PlatformIO/variants/MARLIN_H723VE/ldscript.ld deleted file mode 100644 index 6322861033..0000000000 --- a/buildroot/share/PlatformIO/variants/MARLIN_H723VE/ldscript.ld +++ /dev/null @@ -1,174 +0,0 @@ -/* -****************************************************************************** -** -** File : LinkerScript.ld -** -** Author : STM32CubeIDE -** -** Abstract : Linker script for STM32H7 series -** 512Kbytes FLASH and 560Kbytes RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -** Copyright (c) 2022 STMicroelectronics. -** All rights reserved. -** -** This software is licensed under terms that can be found in the LICENSE file -** in the root directory of this software component. -** If no LICENSE file comes with this software, it is provided AS-IS. -** -**************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = ORIGIN(RAM_D1) + LENGTH(RAM_D1); /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200 ; /* required amount of heap */ -_Min_Stack_Size = 0x400 ; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ - ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K - DTCMRAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K - FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET - RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 320K - RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 32K - RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 16K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - *(.RamFunc) /* .RamFunc sections */ - *(.RamFunc*) /* .RamFunc* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM_D1 AT> FLASH - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss section */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM_D1 - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM_D1 - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/buildroot/share/PlatformIO/variants/MARLIN_H723VE/variant_MARLIN_STM32H723VE.cpp b/buildroot/share/PlatformIO/variants/MARLIN_H723VE/variant_MARLIN_STM32H723VE.cpp deleted file mode 100644 index bfeb0f9abc..0000000000 --- a/buildroot/share/PlatformIO/variants/MARLIN_H723VE/variant_MARLIN_STM32H723VE.cpp +++ /dev/null @@ -1,273 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2020-2021, STMicroelectronics - * All rights reserved. - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ******************************************************************************* - */ -#ifdef STM32H723xx -#include "pins_arduino.h" - -// Digital PinName array -const PinName digitalPin[] = { - PA_0, // D0/A0 - PA_1, // D1/A1 - PA_2, // D2/A2 - PA_3, // D3/A3 - PA_4, // D4/A4 - PA_5, // D5/A5 - PA_6, // D6/A6 - PA_7, // D7/A7 - PA_8, // D8 - PA_9, // D9 - PA_10, // D10 - PA_11, // D11 - PA_12, // D12 - PA_13, // D13 - PA_14, // D14 - PA_15, // D15 - PB_0, // D16/A8 - PB_1, // D17/A9 - PB_2, // D18 - PB_3, // D19 - PB_4, // D20 - PB_5, // D21 - PB_6, // D22 - PB_7, // D23 - PB_8, // D24 - PB_9, // D25 - PB_10, // D26 - PB_11, // D27 - PB_12, // D28 - PB_13, // D29 - PB_14, // D30 - PB_15, // D31 - PC_0, // D32/A10 - PC_1, // D33/A11 - PC_4, // D34/A12 - PC_5, // D35/A13 - PC_6, // D36 - PC_7, // D37 - PC_8, // D38 - PC_9, // D39 - PC_10, // D40 - PC_11, // D41 - PC_12, // D42 - PC_13, // D43 - PC_14, // D44 - PC_15, // D45 - PD_0, // D46 - PD_1, // D47 - PD_2, // D48 - PD_3, // D49 - PD_4, // D50 - PD_5, // D51 - PD_6, // D52 - PD_7, // D53 - PD_8, // D54 - PD_9, // D55 - PD_10, // D56 - PD_11, // D57 - PD_12, // D58 - PD_13, // D59 - PD_14, // D60 - PD_15, // D61 - PE_0, // D62 - PE_1, // D63 - PE_2, // D64 - PE_3, // D65 - PE_4, // D66 - PE_5, // D67 - PE_6, // D68 - PE_7, // D69 - PE_8, // D70 - PE_9, // D71 - PE_10, // D72 - PE_11, // D73 - PE_12, // D74 - PE_13, // D75 - PE_14, // D76 - PE_15, // D77 - PH_0, // D78 - PH_1, // D79 - PC_2_C, // D80/A14 - PC_3_C // D81/A15 -}; - -// Analog (Ax) pin number array -const uint32_t analogInputPin[] = { - 0, // A0, PA0 - 1, // A1, PA1 - 2, // A2, PA2 - 3, // A3, PA3 - 4, // A4, PA4 - 5, // A5, PA5 - 6, // A6, PA6 - 7, // A7, PA7 - 16, // A8, PB0 - 17, // A9, PB1 - 32, // A10, PC0 - 33, // A11, PC1 - 34, // A12, PC4 - 35, // A13, PC5 - 80, // A14, PC2_C - 81 // A15, PC3_C -}; - -void MPU_Config(void) -{ - MPU_Region_InitTypeDef MPU_InitStruct = {0}; - - /* Disables the MPU */ - HAL_MPU_Disable(); - - /** Initializes and configures the Region and the memory to be protected - */ - MPU_InitStruct.Enable = MPU_REGION_ENABLE; - MPU_InitStruct.Number = MPU_REGION_NUMBER0; - MPU_InitStruct.BaseAddress = 0x0; - MPU_InitStruct.Size = MPU_REGION_SIZE_4GB; - MPU_InitStruct.SubRegionDisable = 0x87; - MPU_InitStruct.TypeExtField = MPU_TEX_LEVEL0; - MPU_InitStruct.AccessPermission = MPU_REGION_NO_ACCESS; - MPU_InitStruct.DisableExec = MPU_INSTRUCTION_ACCESS_DISABLE; - MPU_InitStruct.IsShareable = MPU_ACCESS_SHAREABLE; - MPU_InitStruct.IsCacheable = MPU_ACCESS_NOT_CACHEABLE; - MPU_InitStruct.IsBufferable = MPU_ACCESS_NOT_BUFFERABLE; - - HAL_MPU_ConfigRegion(&MPU_InitStruct); - /* Enables the MPU */ - HAL_MPU_Enable(MPU_PRIVILEGED_DEFAULT); - -} - -/* - * @brief System Clock Configuration - * @param None - * @retval None - */ -WEAK void SystemClock_Config(void) -{ - RCC_OscInitTypeDef RCC_OscInitStruct = {0}; - RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {}; - - MPU_Config(); - - /** Supply configuration update enable - */ - HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY); - /** Configure the main internal regulator output voltage - */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE0); - - while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {} - /** Initializes the RCC Oscillators according to the specified parameters - * in the RCC_OscInitTypeDef structure. - */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; // 48Mhz for USB - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = 5; // 25Mhz / 5 = 5Mhz - RCC_OscInitStruct.PLL.PLLN = 110; // 25Mhz / 5 * 110 = 550Mhz - RCC_OscInitStruct.PLL.PLLP = 1; // 550Mhz / 1 = 550Mhz - RCC_OscInitStruct.PLL.PLLQ = 10; // 550Mhz / 10 = 55Mhz - RCC_OscInitStruct.PLL.PLLR = 10; // unused - RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; - RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE; - RCC_OscInitStruct.PLL.PLLFRACN = 0; - if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) - { - Error_Handler(); - } - /** Initializes the CPU, AHB and APB buses clocks - */ - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK - |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2 - |RCC_CLOCKTYPE_D3PCLK1|RCC_CLOCKTYPE_D1PCLK1; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2; - RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; - RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2; - - if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) - { - Error_Handler(); - } - - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB - | RCC_PERIPHCLK_SDMMC | RCC_PERIPHCLK_ADC - | RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_USART16 - | RCC_PERIPHCLK_USART234578 | RCC_PERIPHCLK_I2C123 - | RCC_PERIPHCLK_I2C4 | RCC_PERIPHCLK_SPI123 - | RCC_PERIPHCLK_SPI45 | RCC_PERIPHCLK_SPI6; - - /* HSI48 used for USB 48 Mhz */ - /* PLL1 qclk also used for FMC, SDMMC, RNG, SAI */ - /* PLL2 pclk is needed for adc max 80 Mhz (p,q,r same) */ - /* PLL2 pclk also used for LP timers 2,3,4,5, SPI 1,2,3 */ - /* PLL2 qclk is needed for uart, can, spi4,5,6 80 Mhz */ - /* PLL3 r clk is needed for i2c 80 Mhz (p,q,r same) */ - PeriphClkInitStruct.PLL2.PLL2M = 15; // M DIV 15 vco 25 / 15 ~ 1.667 Mhz - PeriphClkInitStruct.PLL2.PLL2N = 96; // N MUL 96 - PeriphClkInitStruct.PLL2.PLL2P = 2; // P div 2 - PeriphClkInitStruct.PLL2.PLL2Q = 2; // Q div 2 - PeriphClkInitStruct.PLL2.PLL2R = 2; // R div 2 - // RCC_PLL1VCIRANGE_0 Clock range frequency between 1 and 2 MHz - PeriphClkInitStruct.PLL2.PLL2RGE = RCC_PLL2VCIRANGE_0; - PeriphClkInitStruct.PLL2.PLL2VCOSEL = RCC_PLL2VCOMEDIUM; - PeriphClkInitStruct.PLL2.PLL2FRACN = 0; - PeriphClkInitStruct.PLL3.PLL3M = 15; // M DIV 15 vco 25 / 15 ~ 1.667 Mhz - PeriphClkInitStruct.PLL3.PLL3N = 96; // N MUL 96 - PeriphClkInitStruct.PLL3.PLL3P = 2; // P div 2 - PeriphClkInitStruct.PLL3.PLL3Q = 2; // Q div 2 - PeriphClkInitStruct.PLL3.PLL3R = 2; // R div 2 - // RCC_PLL1VCIRANGE_0 Clock range frequency between 1 and 2 MHz - PeriphClkInitStruct.PLL3.PLL3RGE = RCC_PLL3VCIRANGE_0; - PeriphClkInitStruct.PLL3.PLL3VCOSEL = RCC_PLL3VCOMEDIUM; - PeriphClkInitStruct.PLL3.PLL3FRACN = 0; - // ADC from PLL2 pclk - PeriphClkInitStruct.AdcClockSelection = RCC_ADCCLKSOURCE_PLL2; - // USB from HSI48 - PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; - // SDMMC from PLL1 qclk - PeriphClkInitStruct.SdmmcClockSelection = 0; - //PeriphClkInitStruct.SdmmcClockSelection = RCC_SDMMCCLKSOURCE_PLL; - // LPUART from PLL2 qclk - PeriphClkInitStruct.Lpuart1ClockSelection = 0; - //PeriphClkInitStruct.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_PLL2; - // USART from PLL2 qclk - PeriphClkInitStruct.Usart16ClockSelection = RCC_USART16CLKSOURCE_PLL2; - // USART from PLL2 qclk - PeriphClkInitStruct.Usart234578ClockSelection = 0; - //PeriphClkInitStruct.Usart234578ClockSelection = RCC_USART234578CLKSOURCE_PLL2; - // I2C123 from PLL3 rclk - PeriphClkInitStruct.I2c123ClockSelection = RCC_I2C123CLKSOURCE_PLL3; - // I2C4 from PLL3 rclk - PeriphClkInitStruct.I2c4ClockSelection = 0; - //PeriphClkInitStruct.I2c4ClockSelection = RCC_I2C4CLKSOURCE_PLL3; - // SPI123 from PLL2 pclk - PeriphClkInitStruct.Spi123ClockSelection = RCC_SPI123CLKSOURCE_PLL2; - // SPI45 from PLL2 qclk - PeriphClkInitStruct.Spi45ClockSelection = 0; - //PeriphClkInitStruct.Spi45ClockSelection = RCC_SPI45CLKSOURCE_PLL2; - // SPI6 from PLL2 qclk - PeriphClkInitStruct.Spi6ClockSelection = 0; - //PeriphClkInitStruct.Spi6ClockSelection = RCC_SPI6CLKSOURCE_PLL2; - - if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) { - Error_Handler(); - } -} - -#endif /* ARDUINO_GENERIC_* */ diff --git a/buildroot/share/PlatformIO/variants/MARLIN_H723VE/variant_MARLIN_STM32H723VE.h b/buildroot/share/PlatformIO/variants/MARLIN_H723VE/variant_MARLIN_STM32H723VE.h deleted file mode 100644 index 8b67905680..0000000000 --- a/buildroot/share/PlatformIO/variants/MARLIN_H723VE/variant_MARLIN_STM32H723VE.h +++ /dev/null @@ -1,269 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2020, STMicroelectronics - * All rights reserved. - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ******************************************************************************* - */ -#pragma once - -/*---------------------------------------------------------------------------- - * STM32 pins number - *----------------------------------------------------------------------------*/ -#define PA0 PIN_A0 -#define PA1 PIN_A1 -#define PA2 PIN_A2 -#define PA3 PIN_A3 -#define PA4 PIN_A4 -#define PA5 PIN_A5 -#define PA6 PIN_A6 -#define PA7 PIN_A7 -#define PA8 8 -#define PA9 9 -#define PA10 10 -#define PA11 11 -#define PA12 12 -#define PA13 13 -#define PA14 14 -#define PA15 15 -#define PB0 PIN_A8 -#define PB1 PIN_A9 -#define PB2 18 -#define PB3 19 -#define PB4 20 -#define PB5 21 -#define PB6 22 -#define PB7 23 -#define PB8 24 -#define PB9 25 -#define PB10 26 -#define PB11 27 -#define PB12 28 -#define PB13 29 -#define PB14 30 -#define PB15 31 -#define PC0 PIN_A10 -#define PC1 PIN_A11 -#define PC4 PIN_A12 -#define PC5 PIN_A13 -#define PC6 36 -#define PC7 37 -#define PC8 38 -#define PC9 39 -#define PC10 40 -#define PC11 41 -#define PC12 42 -#define PC13 43 -#define PC14 44 -#define PC15 45 -#define PD0 46 -#define PD1 47 -#define PD2 48 -#define PD3 49 -#define PD4 50 -#define PD5 51 -#define PD6 52 -#define PD7 53 -#define PD8 54 -#define PD9 55 -#define PD10 56 -#define PD11 57 -#define PD12 58 -#define PD13 59 -#define PD14 60 -#define PD15 61 -#define PE0 62 -#define PE1 63 -#define PE2 64 -#define PE3 65 -#define PE4 66 -#define PE5 67 -#define PE6 68 -#define PE7 69 -#define PE8 70 -#define PE9 71 -#define PE10 72 -#define PE11 73 -#define PE12 74 -#define PE13 75 -#define PE14 76 -#define PE15 77 -#define PH0 78 -#define PH1 79 -#define PC2_C PIN_A14 -#define PC3_C PIN_A15 -#define PC2 PC2_C -#define PC3 PC3_C - -// Alternate pins number -#define PA0_ALT1 (PA0 | ALT1) -#define PA1_ALT1 (PA1 | ALT1) -#define PA1_ALT2 (PA1 | ALT2) -#define PA2_ALT1 (PA2 | ALT1) -#define PA2_ALT2 (PA2 | ALT2) -#define PA3_ALT1 (PA3 | ALT1) -#define PA3_ALT2 (PA3 | ALT2) -#define PA4_ALT1 (PA4 | ALT1) -#define PA4_ALT2 (PA4 | ALT2) -#define PA5_ALT1 (PA5 | ALT1) -#define PA6_ALT1 (PA6 | ALT1) -#define PA7_ALT1 (PA7 | ALT1) -#define PA7_ALT2 (PA7 | ALT2) -#define PA7_ALT3 (PA7 | ALT3) -#define PA8_ALT1 (PA8 | ALT1) -#define PA9_ALT1 (PA9 | ALT1) -#define PA10_ALT1 (PA10 | ALT1) -#define PA11_ALT1 (PA11 | ALT1) -#define PA12_ALT1 (PA12 | ALT1) -#define PA15_ALT1 (PA15 | ALT1) -#define PA15_ALT2 (PA15 | ALT2) -#define PB0_ALT1 (PB0 | ALT1) -#define PB0_ALT2 (PB0 | ALT2) -#define PB1_ALT1 (PB1 | ALT1) -#define PB1_ALT2 (PB1 | ALT2) -#define PB3_ALT1 (PB3 | ALT1) -#define PB3_ALT2 (PB3 | ALT2) -#define PB4_ALT1 (PB4 | ALT1) -#define PB4_ALT2 (PB4 | ALT2) -#define PB5_ALT1 (PB5 | ALT1) -#define PB5_ALT2 (PB5 | ALT2) -#define PB6_ALT1 (PB6 | ALT1) -#define PB6_ALT2 (PB6 | ALT2) -#define PB7_ALT1 (PB7 | ALT1) -#define PB8_ALT1 (PB8 | ALT1) -#define PB8_ALT2 (PB8 | ALT2) -#define PB9_ALT1 (PB9 | ALT1) -#define PB9_ALT2 (PB9 | ALT2) -#define PB14_ALT1 (PB14 | ALT1) -#define PB14_ALT2 (PB14 | ALT2) -#define PB15_ALT1 (PB15 | ALT1) -#define PB15_ALT2 (PB15 | ALT2) -#define PC0_ALT1 (PC0 | ALT1) -#define PC0_ALT2 (PC0 | ALT2) -#define PC1_ALT1 (PC1 | ALT1) -#define PC1_ALT2 (PC1 | ALT2) -#define PC4_ALT1 (PC4 | ALT1) -#define PC5_ALT1 (PC5 | ALT1) -#define PC6_ALT1 (PC6 | ALT1) -#define PC6_ALT2 (PC6 | ALT2) -#define PC7_ALT1 (PC7 | ALT1) -#define PC7_ALT2 (PC7 | ALT2) -#define PC8_ALT1 (PC8 | ALT1) -#define PC9_ALT1 (PC9 | ALT1) -#define PC10_ALT1 (PC10 | ALT1) -#define PC11_ALT1 (PC11 | ALT1) - -#define NUM_DIGITAL_PINS 82 -#define NUM_DUALPAD_PINS 2 -#define NUM_ANALOG_INPUTS 16 - -// On-board LED pin number -#ifndef LED_BUILTIN - #define LED_BUILTIN PNUM_NOT_DEFINED -#endif - -// On-board user button -#ifndef USER_BTN - #define USER_BTN PNUM_NOT_DEFINED -#endif - -// SPI definitions -#ifndef PIN_SPI_SS - #define PIN_SPI_SS PA4 -#endif -#ifndef PIN_SPI_SS1 - #define PIN_SPI_SS1 PA15 -#endif -#ifndef PIN_SPI_SS2 - #define PIN_SPI_SS2 PNUM_NOT_DEFINED -#endif -#ifndef PIN_SPI_SS3 - #define PIN_SPI_SS3 PNUM_NOT_DEFINED -#endif -#ifndef PIN_SPI_MOSI - #define PIN_SPI_MOSI PA7 -#endif -#ifndef PIN_SPI_MISO - #define PIN_SPI_MISO PA6 -#endif -#ifndef PIN_SPI_SCK - #define PIN_SPI_SCK PA5 -#endif - -// I2C definitions -#ifndef PIN_WIRE_SDA - #define PIN_WIRE_SDA PB7 -#endif -#ifndef PIN_WIRE_SCL - #define PIN_WIRE_SCL PB6 -#endif - -// Timer Definitions -// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin -#ifndef TIMER_TONE - #define TIMER_TONE TIM6 -#endif -#ifndef TIMER_SERVO - #define TIMER_SERVO TIM7 -#endif - -// UART Definitions -#ifndef SERIAL_UART_INSTANCE - #define SERIAL_UART_INSTANCE 4 -#endif - -// Default pin used for generic 'Serial' instance -// Mandatory for Firmata -#ifndef PIN_SERIAL_RX - #define PIN_SERIAL_RX PA1 -#endif -#ifndef PIN_SERIAL_TX - #define PIN_SERIAL_TX PA0 -#endif - -// Extra HAL modules -#if !defined(HAL_DAC_MODULE_DISABLED) - #define HAL_DAC_MODULE_ENABLED -#endif -#if !defined(HAL_ETH_MODULE_DISABLED) - #define HAL_ETH_MODULE_ENABLED -#endif -#if !defined(HAL_OSPI_MODULE_DISABLED) - #define HAL_OSPI_MODULE_ENABLED -#endif -#if !defined(HAL_SD_MODULE_DISABLED) - #define HAL_SD_MODULE_ENABLED -#endif - -/*---------------------------------------------------------------------------- - * Arduino objects - C++ only - *----------------------------------------------------------------------------*/ - -#ifdef __cplusplus - // These serial port names are intended to allow libraries and architecture-neutral - // sketches to automatically default to the correct port name for a particular type - // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, - // the first hardware serial port whose RX/TX pins are not dedicated to another use. - // - // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor - // - // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial - // - // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library - // - // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. - // - // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX - // pins are NOT connected to anything by default. - #ifndef SERIAL_PORT_MONITOR - #define SERIAL_PORT_MONITOR Serial - #endif - #ifndef SERIAL_PORT_HARDWARE - #define SERIAL_PORT_HARDWARE Serial - #endif -#endif diff --git a/ini/renamed.ini b/ini/renamed.ini index 99fbde95d0..9d2706e3b3 100644 --- a/ini/renamed.ini +++ b/ini/renamed.ini @@ -72,5 +72,11 @@ extends = renamed [env:BIGTREE_OCTOPUS_V1_F407_USB] ;=> STM32F407ZE_btt_USB extends = renamed -[env:STM32H723Vx_btt] ;=> STM32H723VE_btt or STM32H723VG_btt +[env:STM32H723Vx_btt] ;=> STM32H723VG_btt +extends = renamed + +[env:STM32H723Zx_btt] ;=> STM32H723ZE_btt +extends = renamed + +[env:STM32H743Vx_btt] ;=> STM32H743VI_btt extends = renamed diff --git a/ini/stm32h7.ini b/ini/stm32h7.ini index 5485e57e91..73d3b8779b 100644 --- a/ini/stm32h7.ini +++ b/ini/stm32h7.ini @@ -13,7 +13,7 @@ # 7 : Cortex M7 core (0:M0, 1-2:M3, 3-4:M4, 7:M7) # 43 : Line/Features # I : 176 pins (T:36, C:48 or 49, M:81, V:100, Z:144, I:176) -# I : 2048KB Flash-memory (C:256KB, D:384KB, E:512KB, G:1024KB) +# I : 2048KB Flash-memory (C:256KB, D:384KB, E:512KB, G:1024KB, I:2048KB) # T : LQFP package # 6 : -40...85°C (7: ...105°C) # @@ -40,13 +40,12 @@ upload_protocol = cmsis-dap debug_tool = cmsis-dap # -# BigTreeTech SKR V3.0 / V3.0 EZ (STM32H743VIT6 ARM Cortex-M7) +# BigTreeTech STM32H743Vx ARM Cortex-M7 Common # -[env:STM32H743Vx_btt] +[STM32H743Vx_btt] extends = stm32_variant platform = ststm32@15.4.1 platform_packages = framework-arduinoststm32@~4.20200.220530 -board = marlin_STM32H743Vx board_build.offset = 0x20000 board_upload.offset_address = 0x08020000 build_flags = ${stm32_variant.build_flags} @@ -60,6 +59,13 @@ build_flags = ${stm32_variant.build_flags} upload_protocol = cmsis-dap debug_tool = cmsis-dap +# +# BigTreeTech SKR V3.0 / V3.0 EZ (STM32H743VIT6 ARM Cortex-M7) +# +[env:STM32H743VI_btt] +extends = STM32H743Vx_btt +board = marlin_STM32H743VI + # # BigTreeTech STM32H723Vx ARM Cortex-M7 Common # @@ -85,13 +91,6 @@ build_flags = ${stm32_variant.build_flags} upload_protocol = cmsis-dap debug_tool = cmsis-dap -# -# BigTreeTech Octopus Max EZ V1.0 (STM32H723VET6 ARM Cortex-M7) -# -[env:STM32H723VE_btt] -extends = STM32H723Vx_btt -board = marlin_STM32H723VE - # # BigTreeTech SKR V3.0 / SKR V3.0 EZ (STM32H723VGT6 ARM Cortex-M7) # @@ -100,13 +99,12 @@ extends = STM32H723Vx_btt board = marlin_STM32H723VG # -# BigTreeTech Octopus Pro V1.0 / Octopus Max EZ V1.0 (STM32H723ZET6 ARM Cortex-M7) +# BigTreeTech STM32H723Zx ARM Cortex-M7 Common # -[env:STM32H723Zx_btt] +[STM32H723Zx_btt] extends = stm32_variant platform = ststm32@15.4.1 platform_packages = framework-arduinoststm32@~4.20200.220530 -board = marlin_STM32H723Zx board_build.offset = 0x20000 board_upload.offset_address = 0x08020000 build_flags = ${stm32_variant.build_flags} @@ -124,3 +122,10 @@ build_flags = ${stm32_variant.build_flags} -UI2C5_BASE upload_protocol = cmsis-dap debug_tool = cmsis-dap + +# +# BigTreeTech Octopus Pro V1.0 / Octopus Max EZ V1.0 (STM32H723ZET6 ARM Cortex-M7) +# +[env:STM32H723ZE_btt] +extends = STM32H723Zx_btt +board = marlin_STM32H723ZE