From 9e07df5c1b39d0775158e21dcf0ec909eb98f75e Mon Sep 17 00:00:00 2001
From: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Sun, 22 Apr 2018 02:50:48 -0500
Subject: [PATCH] Extra options for LEVEL_BED_CORNERS (#10483)

---
 Marlin/Configuration.h                        |  5 ++++
 Marlin/src/config/default/Configuration.h     |  5 ++++
 .../AlephObjects/TAZ4/Configuration.h         |  5 ++++
 .../AliExpress/CL-260/Configuration.h         |  5 ++++
 .../config/examples/Anet/A6/Configuration.h   |  5 ++++
 .../config/examples/Anet/A8/Configuration.h   |  5 ++++
 .../examples/Azteeg/X5GT/Configuration.h      |  5 ++++
 .../BIBO/TouchX/cyclops/Configuration.h       |  5 ++++
 .../BIBO/TouchX/default/Configuration.h       |  5 ++++
 .../examples/BQ/Hephestos/Configuration.h     |  5 ++++
 .../examples/BQ/Hephestos_2/Configuration.h   |  5 ++++
 .../config/examples/BQ/WITBOX/Configuration.h |  5 ++++
 .../config/examples/Cartesio/Configuration.h  |  5 ++++
 .../examples/Creality/CR-10/Configuration.h   |  5 ++++
 .../examples/Creality/CR-10S/Configuration.h  |  5 ++++
 .../Creality/CR-10mini/Configuration.h        |  5 ++++
 .../examples/Creality/CR-8/Configuration.h    |  5 ++++
 .../examples/Creality/Ender-2/Configuration.h |  5 ++++
 .../examples/Creality/Ender-4/Configuration.h |  5 ++++
 .../src/config/examples/Felix/Configuration.h |  5 ++++
 .../examples/Felix/DUAL/Configuration.h       |  5 ++++
 .../FolgerTech/i3-2020/Configuration.h        |  5 ++++
 .../examples/Geeetech/GT2560/Configuration.h  |  5 ++++
 .../Geeetech/I3_Pro_X-GT2560/Configuration.h  |  5 ++++
 .../Prusa i3 Pro B/bltouch/Configuration.h    |  5 ++++
 .../Prusa i3 Pro B/noprobe/Configuration.h    |  5 ++++
 .../examples/Infitary/i3-M508/Configuration.h |  5 ++++
 .../examples/JGAurora/A5/Configuration.h      |  5 ++++
 .../examples/MakerParts/Configuration.h       |  5 ++++
 .../examples/Malyan/M150/Configuration.h      |  5 ++++
 .../examples/Malyan/M200/Configuration.h      |  5 ++++
 .../Micromake/C1/basic/Configuration.h        |  5 ++++
 .../Micromake/C1/enhanced/Configuration.h     |  5 ++++
 .../config/examples/Mks/Sbase/Configuration.h |  5 ++++
 .../examples/RepRapPro/Huxley/Configuration.h |  5 ++++
 .../RepRapWorld/Megatronics/Configuration.h   |  5 ++++
 .../config/examples/RigidBot/Configuration.h  |  5 ++++
 .../src/config/examples/SCARA/Configuration.h |  5 ++++
 .../config/examples/STM32F10/Configuration.h  |  5 ++++
 .../config/examples/STM32F4/Configuration.h   |  5 ++++
 .../examples/Sanguinololu/Configuration.h     |  5 ++++
 .../config/examples/TheBorg/Configuration.h   |  5 ++++
 .../config/examples/TinyBoy2/Configuration.h  |  5 ++++
 .../config/examples/Tronxy/X1/Configuration.h |  5 ++++
 .../examples/Tronxy/X5S/Configuration.h       |  5 ++++
 .../examples/Tronxy/XY100/Configuration.h     |  5 ++++
 .../UltiMachine/Archim2/Configuration.h       |  5 ++++
 .../examples/Velleman/K8200/Configuration.h   |  5 ++++
 .../examples/Velleman/K8400/Configuration.h   |  5 ++++
 .../Velleman/K8400/Dual-head/Configuration.h  |  5 ++++
 .../Wanhao/Duplicator 6/Configuration.h       |  5 ++++
 .../examples/adafruit/ST7565/Configuration.h  |  5 ++++
 .../FLSUN/auto_calibrate/Configuration.h      |  5 ++++
 .../delta/FLSUN/kossel/Configuration.h        |  5 ++++
 .../delta/FLSUN/kossel_mini/Configuration.h   |  5 ++++
 .../delta/Hatchbox_Alpha/Configuration.h      |  5 ++++
 .../examples/delta/generic/Configuration.h    |  5 ++++
 .../delta/kossel_mini/Configuration.h         |  5 ++++
 .../examples/delta/kossel_pro/Configuration.h |  5 ++++
 .../examples/delta/kossel_xl/Configuration.h  |  5 ++++
 .../examples/gCreate/gMax1.5+/Configuration.h |  5 ++++
 .../config/examples/makibox/Configuration.h   |  5 ++++
 .../examples/stm32f103ret6/Configuration.h    |  5 ++++
 .../examples/tvrrug/Round2/Configuration.h    |  5 ++++
 .../src/config/examples/wt150/Configuration.h |  5 ++++
 Marlin/src/inc/SanityCheck.h                  |  2 ++
 Marlin/src/lcd/ultralcd.cpp                   | 30 ++++++++++++++-----
 67 files changed, 350 insertions(+), 7 deletions(-)

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 64258a181a8..ed218e771c3 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -1077,6 +1077,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/default/Configuration.h b/Marlin/src/config/default/Configuration.h
index 64258a181a8..ed218e771c3 100644
--- a/Marlin/src/config/default/Configuration.h
+++ b/Marlin/src/config/default/Configuration.h
@@ -1077,6 +1077,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
index 84ed1495e41..97deff0e60b 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -1097,6 +1097,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
index 0c871f9fcfe..bea4e28ef3a 100644
--- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
+++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
@@ -1077,6 +1077,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h
index d38ac01cd13..f9691003b91 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration.h
@@ -1215,6 +1215,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h
index 632da57bc2a..3ebb2894cc4 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration.h
@@ -1095,6 +1095,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
index 10d0be6d559..1f2c77b6633 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
@@ -1077,6 +1077,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
index 88fa590cec2..20834e9831f 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -1077,6 +1077,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
index af00bcb7977..c41063f2ed1 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
@@ -1077,6 +1077,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
index 517e7921eed..e4dc07e98e4 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
@@ -1065,6 +1065,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
index bd559d2f7d7..f743e4e35da 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
@@ -1089,6 +1089,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
index 5e8ff50ed86..6d6a85a02bc 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
@@ -1065,6 +1065,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h
index 40df14b4191..707015ce7ce 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration.h
@@ -1076,6 +1076,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
index eff898141ad..91d13f9f6b5 100755
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
@@ -1087,6 +1087,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
index 77e11e6e7d1..3533bfbb9f6 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
@@ -1078,6 +1078,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
index 5b0a0889e52..f16b7999c86 100644
--- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
@@ -1096,6 +1096,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration.h b/Marlin/src/config/examples/Creality/CR-8/Configuration.h
index 8eb91439687..16c6086d385 100644
--- a/Marlin/src/config/examples/Creality/CR-8/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-8/Configuration.h
@@ -1087,6 +1087,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
index af703097a67..ff6089adf5c 100644
--- a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
@@ -1081,6 +1081,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
index 9fbf305737e..45c58ae1bb8 100644
--- a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
@@ -1087,6 +1087,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h
index d4637f1fe63..0e9a97f22bb 100644
--- a/Marlin/src/config/examples/Felix/Configuration.h
+++ b/Marlin/src/config/examples/Felix/Configuration.h
@@ -1059,6 +1059,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h
index ae304f74582..b0e430c700f 100644
--- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h
+++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h
@@ -1059,6 +1059,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
index 6b5c5c8e983..14bc806359d 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -1101,6 +1101,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
index c8e5e0d03b7..7a1227caa8b 100644
--- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
@@ -1092,6 +1092,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index d315874c2cc..785a1c76224 100644
--- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -1077,6 +1077,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 11650783aca..12ee32e484e 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
@@ -1093,6 +1093,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index 1d6b250b084..97c30cbaddc 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
@@ -1092,6 +1092,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
index 1d2758ecd2d..d4f61a8181e 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
@@ -1081,6 +1081,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h
index 67712a92140..6986956a75e 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h
@@ -1088,6 +1088,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h
index fff251b577f..000fd9778fd 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration.h
@@ -1097,6 +1097,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h
index 84e197f2518..a799c51f8a9 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h
@@ -1116,6 +1116,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h
index 339c4502a12..038ffb376e3 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h
@@ -1076,6 +1076,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
index d6a7d4c0859..d8f8bb31a72 100644
--- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
+++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
@@ -1081,6 +1081,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
index 41b536b21c7..7d471bca3af 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -1081,6 +1081,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h
index 5f40c3908ca..9d9a3aa152b 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h
@@ -1077,6 +1077,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
index 3cc8104068a..e6ccd46d725 100644
--- a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
@@ -1126,6 +1126,11 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
index 6cee845e8de..43846ef426d 100644
--- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -1077,6 +1077,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h
index 274dfa2f4e8..24219b04af9 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration.h
@@ -1075,6 +1075,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h
index 37038757e5e..4d405cfc97e 100644
--- a/Marlin/src/config/examples/SCARA/Configuration.h
+++ b/Marlin/src/config/examples/SCARA/Configuration.h
@@ -1090,6 +1090,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h
index 10b2cb3282d..159d2129101 100644
--- a/Marlin/src/config/examples/STM32F10/Configuration.h
+++ b/Marlin/src/config/examples/STM32F10/Configuration.h
@@ -1080,6 +1080,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/STM32F4/Configuration.h b/Marlin/src/config/examples/STM32F4/Configuration.h
index 76360030486..de67b28c564 100644
--- a/Marlin/src/config/examples/STM32F4/Configuration.h
+++ b/Marlin/src/config/examples/STM32F4/Configuration.h
@@ -1077,6 +1077,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h
index d307e2dd1ed..9d9daafbbf0 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h
@@ -1108,6 +1108,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/TheBorg/Configuration.h b/Marlin/src/config/examples/TheBorg/Configuration.h
index 3e77d576dad..98aad2d7f97 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration.h
@@ -1077,6 +1077,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h
index 33adf7a53ca..8422f7ce6ee 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h
@@ -1133,6 +1133,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h
index c48bfb12b65..021bb9a4533 100644
--- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h
@@ -1077,6 +1077,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
index 45eb828c851..dea4652bf97 100644
--- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
@@ -1077,6 +1077,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
index 32ab20251ee..b22d24aa228 100644
--- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
@@ -1088,6 +1088,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
index c2f7e72d0d2..75796866ab2 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
@@ -1077,6 +1077,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
index 7784e4055a0..bac37eb7cb2 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
@@ -1107,6 +1107,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h
index c49ec753f7b..4e5375853f4 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h
@@ -1077,6 +1077,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
index 6787408e79a..942c9051880 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -1077,6 +1077,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
index c3d79d361c6..e657dcf8c68 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h	
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h	
@@ -1084,6 +1084,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
index 2e4e8d0b8b3..4dedbce9b6a 100644
--- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
+++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
@@ -1077,6 +1077,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index 73bd69972a0..7515d0749ff 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -1228,6 +1228,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
index 5e9a7154522..73dccf0fd4a 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -1210,6 +1210,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index 228fa2f75dd..2fe5f17e1a0 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -1209,6 +1209,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
index 67dd248a91a..13213e3cdbf 100644
--- a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -1223,6 +1223,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h
index a3464642f1d..cb1c2771b91 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration.h
@@ -1197,6 +1197,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
index 5a8eb0d80be..4fbffa4ba8e 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
@@ -1200,6 +1200,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
index 2eae24eeb61..47430ba14c5 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
@@ -1200,6 +1200,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
index c4a9ec7d427..fb929a07101 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
@@ -1200,6 +1200,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
index 8a3fd065dae..61fc5f51ff9 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -1098,6 +1098,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h
index fa75a70413e..794918d3125 100644
--- a/Marlin/src/config/examples/makibox/Configuration.h
+++ b/Marlin/src/config/examples/makibox/Configuration.h
@@ -1080,6 +1080,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
index 347564c7e11..11abf8de609 100644
--- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h
+++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
@@ -1078,6 +1078,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
index b99134350d4..83b435ce809 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
@@ -1072,6 +1072,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h
index 7971ab651ce..c7e779ca459 100644
--- a/Marlin/src/config/examples/wt150/Configuration.h
+++ b/Marlin/src/config/examples/wt150/Configuration.h
@@ -1082,6 +1082,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index 165690a2a17..fe30e07aa6f 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -270,6 +270,8 @@
   #error "AUTOMATIC_CURRENT_CONTROL is now MONITOR_DRIVER_STATUS. Please update your configuration."
 #elif defined(FILAMENT_CHANGE_LOAD_LENGTH)
   #error "FILAMENT_CHANGE_LOAD_LENGTH is now FILAMENT_CHANGE_FAST_LOAD_LENGTH. Please update your configuration."
+#elif ENABLED(LEVEL_BED_CORNERS) && !defined(LEVEL_CORNERS_INSET)
+  #error "LEVEL_BED_CORNERS requires a LEVEL_CORNERS_INSET value. Please update your Configuration.h."
 #endif
 
 #define BOARD_MKS_13     -47
diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp
index a633b6a8d12..af19eade33b 100644
--- a/Marlin/src/lcd/ultralcd.cpp
+++ b/Marlin/src/lcd/ultralcd.cpp
@@ -1834,27 +1834,43 @@ void kill_screen(const char* lcd_msg) {
       line_to_z(4.0);
       switch (bed_corner) {
         case 0:
-          current_position[X_AXIS] = X_MIN_BED + 10;
-          current_position[Y_AXIS] = Y_MIN_BED + 10;
+          current_position[X_AXIS] = X_MIN_BED + LEVEL_CORNERS_INSET;
+          current_position[Y_AXIS] = Y_MIN_BED + LEVEL_CORNERS_INSET;
           break;
         case 1:
-          current_position[X_AXIS] = X_MAX_BED - 10;
+          current_position[X_AXIS] = X_MAX_BED - LEVEL_CORNERS_INSET;
           break;
         case 2:
-          current_position[Y_AXIS] = Y_MAX_BED - 10;
+          current_position[Y_AXIS] = Y_MAX_BED - LEVEL_CORNERS_INSET;
           break;
         case 3:
-          current_position[X_AXIS] = X_MIN_BED + 10;
+          current_position[X_AXIS] = X_MIN_BED + LEVEL_CORNERS_INSET;
           break;
+        #if ENABLED(LEVEL_CENTER_TOO)
+          case 4:
+            current_position[X_AXIS] = X_CENTER;
+            current_position[Y_AXIS] = Y_CENTER;
+            break;
+        #endif
       }
       planner.buffer_line_kinematic(current_position, MMM_TO_MMS(manual_feedrate_mm_m[X_AXIS]), active_extruder);
       line_to_z(0.0);
-      if (++bed_corner > 3) bed_corner = 0;
+      if (++bed_corner > 3
+        #if ENABLED(LEVEL_CENTER_TOO)
+          + 1
+        #endif
+      ) bed_corner = 0;
     }
 
     void _lcd_corner_submenu() {
       START_MENU();
-      MENU_ITEM(function, MSG_NEXT_CORNER, _lcd_goto_next_corner);
+      MENU_ITEM(function,
+        #if ENABLED(LEVEL_CENTER_TOO)
+          MSG_LEVEL_BED_NEXT_POINT
+        #else
+          MSG_NEXT_CORNER
+        #endif
+        , _lcd_goto_next_corner);
       MENU_ITEM(function, MSG_BACK, lcd_goto_previous_menu_no_defer);
       END_MENU();
     }