3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-28 06:21:31 +00:00
Code Issues Releases Wiki Activity

Merge pull request #9263 from thinkyhead/bf1_print_start_fix

Browse Source 
[1.1.x] Minor filament change improvements
This commit is contained in:
Scott Lahteine 2018-01-22 05:52:58 -06:00 committed by GitHub
commit a29ca4947e
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 114 additions and 45 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

127
Marlin/Marlin_main.cpp
View File

@ -6301,6 +6301,15 @@ inline void gcode_M17() {
}
#endif
/**
* Ensure a safe temperature for extrusion
*
* - Fail if the TARGET temperature is too low
* - Display LCD placard with temperature status
* - Return when heating is done or aborted
*
* Returns 'true' if heating was completed, 'false' for abort
*/
static bool ensure_safe_temperature(const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT) {
#if ENABLED(PREVENT_COLD_EXTRUSION)
@ -6325,7 +6334,19 @@ inline void gcode_M17() {
return status;
}
static bool load_filament(const float &load_length=0, const float &extrude_length=0, const int8_t max_beep_count=0,
/**
* Load filament into the hotend
*
* - Fail if the a safe temperature was not reached
* - If pausing for confirmation, wait for a click or M108
* - Show "wait for load" placard
* - Load and purge filament
* - Show "Purge more" / "Continue" menu
* - Return when "Continue" is selected
*
* Returns 'true' if load was completed, 'false' for abort
*/
static bool load_filament(const float &load_length=0, const float &purge_length=0, const int8_t max_beep_count=0,
const bool show_lcd=false, const bool pause_for_user=false,
const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT
) {
@ -6368,15 +6389,15 @@ inline void gcode_M17() {
}
#if ENABLED(ULTIPANEL)
if (show_lcd) // Show "load" message
if (show_lcd) // Show "wait for load" message
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_LOAD, mode);
#endif
// Load filament
do_pause_e_move(load_length, FILAMENT_CHANGE_LOAD_FEEDRATE);
if (load_length) do_pause_e_move(load_length, FILAMENT_CHANGE_LOAD_FEEDRATE);
do {
if (extrude_length > 0) {
if (purge_length > 0) {
// "Wait for filament purge"
#if ENABLED(ULTIPANEL)
if (show_lcd)
@ -6384,10 +6405,10 @@ inline void gcode_M17() {
#endif
// Extrude filament to get into hotend
do_pause_e_move(extrude_length, ADVANCED_PAUSE_EXTRUDE_FEEDRATE);
do_pause_e_move(purge_length, ADVANCED_PAUSE_EXTRUDE_FEEDRATE);
}
// Show "Extrude More" / "Resume" menu and wait for reply
// Show "Purge More" / "Resume" menu and wait for reply
#if ENABLED(ULTIPANEL)
if (show_lcd) {
KEEPALIVE_STATE(PAUSED_FOR_USER);
@ -6398,7 +6419,7 @@ inline void gcode_M17() {
}
#endif
// Keep looping if "Extrude More" was selected
// Keep looping if "Purge More" was selected
} while (
#if ENABLED(ULTIPANEL)
show_lcd && advanced_pause_menu_response == ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE
@ -6410,6 +6431,16 @@ inline void gcode_M17() {
return true;
}
/**
* Unload filament from the hotend
*
* - Fail if the a safe temperature was not reached
* - Show "wait for unload" placard
* - Retract, pause, then unload filament
* - Disable E stepper (on most machines)
*
* Returns 'true' if unload was completed, 'false' for abort
*/
static bool unload_filament(const float &unload_length, const bool show_lcd=false,
const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT
) {
@ -6450,6 +6481,19 @@ inline void gcode_M17() {
return true;
}
/**
* Pause procedure
*
* - Abort if already paused
* - Send host action for pause, if configured
* - Abort if TARGET temperature is too low
* - Display "wait for start of filament change" (if a length was specified)
* - Initial retract, if current temperature is hot enough
* - Park the nozzle at the given position
* - Call unload_filament (if a length was specified)
*
* Returns 'true' if pause was completed, 'false' for abort
*/
static bool pause_print(const float &retract, const point_t &park_point, const float &unload_length=0, const bool show_lcd=false) {
if (did_pause_print) return false; // already paused
@ -6457,11 +6501,6 @@ inline void gcode_M17() {
SERIAL_ECHOLNPGM("//action:" ACTION_ON_PAUSE);
#endif
#if ENABLED(ULTIPANEL)
if (show_lcd) // Show initial message
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INIT);
#endif
if (!DEBUGGING(DRYRUN) && unload_length && thermalManager.targetTooColdToExtrude(active_extruder)) {
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_HOTEND_TOO_COLD);
@ -6469,6 +6508,7 @@ inline void gcode_M17() {
#if ENABLED(ULTIPANEL)
if (show_lcd) // Show status screen
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS);
LCD_MESSAGEPGM(MSG_M600_TOO_COLD);
#endif
return false; // unable to reach safe temperature
@ -6481,7 +6521,7 @@ inline void gcode_M17() {
#if ENABLED(SDSUPPORT)
if (card.sdprinting) {
card.pauseSDPrint();
++did_pause_print;
++did_pause_print; // Indicate SD pause also
}
#endif
print_job_timer.pause();
@ -6493,7 +6533,7 @@ inline void gcode_M17() {
COPY(resume_position, current_position);
// Initial retract before move to filament change position
if (retract && !thermalManager.tooColdToExtrude(active_extruder))
if (retract && thermalManager.hotEnoughToExtrude(active_extruder))
do_pause_e_move(retract, PAUSE_PARK_RETRACT_FEEDRATE);
// Park the nozzle by moving up by z_lift and then moving to (x_pos, y_pos)
@ -6506,6 +6546,13 @@ inline void gcode_M17() {
return true;
}
/**
* - Show "Insert filament and press button to continue"
* - Wait for a click before returning
* - Heaters can time out, reheated before accepting a click
*
* Used by M125 and M600
*/
static void wait_for_filament_reload(const int8_t max_beep_count=0) {
bool nozzle_timed_out = false;
@ -6592,20 +6639,37 @@ inline void gcode_M17() {
KEEPALIVE_STATE(IN_HANDLER);
}
static void resume_print(const float &load_length=0, const float &extrude_length=ADVANCED_PAUSE_EXTRUDE_LENGTH, const int8_t max_beep_count=0) {
bool nozzle_timed_out = false;
/**
* Resume or Start print procedure
*
* - Abort if not paused
* - Reset heater idle timers
* - Load filament if specified, but only if:
* - a nozzle timed out, or
* - the nozzle is already heated.
* - Display "wait for print to resume"
* - Re-prime the nozzle...
* - FWRETRACT: Recover/prime from the prior G10.
* - !FWRETRACT: Retract by resume_position[E], if negative.
* Not sure how this logic comes into use.
* - Move the nozzle back to resume_position
* - Sync the planner E to resume_position[E]
* - Send host action for resume, if configured
* - Resume the current SD print job, if any
*/
static void resume_print(const float &load_length=0, const float &purge_length=ADVANCED_PAUSE_EXTRUDE_LENGTH, const int8_t max_beep_count=0) {
if (!did_pause_print) return;
// Re-enable the heaters if they timed out
bool nozzle_timed_out = false;
HOTEND_LOOP() {
nozzle_timed_out |= thermalManager.is_heater_idle(e);
thermalManager.reset_heater_idle_timer(e);
}
if (nozzle_timed_out || !thermalManager.tooColdToExtrude(active_extruder)) {
if (nozzle_timed_out || thermalManager.hotEnoughToExtrude(active_extruder)) {
// Load the new filament
load_filament(load_length, extrude_length, max_beep_count, true, nozzle_timed_out);
load_filament(load_length, purge_length, max_beep_count, true, nozzle_timed_out);
}
#if ENABLED(ULTIPANEL)
@ -6619,7 +6683,7 @@ inline void gcode_M17() {
if (fwretract.retracted[active_extruder])
do_pause_e_move(-fwretract.retract_length, fwretract.retract_feedrate_mm_s);
#else
// If resume_position negative
// If resume_position is negative
if (resume_position[E_AXIS] < 0) do_pause_e_move(resume_position[E_AXIS], PAUSE_PARK_RETRACT_FEEDRATE);
#endif
@ -8521,11 +8585,11 @@ inline void gcode_M121() { endstops.enable_globally(false); }
inline void gcode_M125() {
// Initial retract before move to filament change position
const float retract = parser.seen('L') ? parser.value_axis_units(E_AXIS) : 0
const float retract = -FABS(parser.seen('L') ? parser.value_axis_units(E_AXIS) : 0
#ifdef PAUSE_PARK_RETRACT_LENGTH
- (PAUSE_PARK_RETRACT_LENGTH)
+ (PAUSE_PARK_RETRACT_LENGTH)
#endif
;
);
point_t park_point = NOZZLE_PARK_POINT;
@ -9980,15 +10044,11 @@ inline void gcode_M502() {
);
// Lift Z axis
if (parser.seenval('Z'))
park_point.z = parser.linearval('Z');
if (parser.seenval('Z')) park_point.z = parser.linearval('Z');
// Move XY axes to filament change position or given position
if (parser.seenval('X'))
park_point.x = parser.linearval('X');
if (parser.seenval('Y'))
park_point.y = parser.linearval('Y');
if (parser.seenval('X')) park_point.x = parser.linearval('X');
if (parser.seenval('Y')) park_point.y = parser.linearval('Y');
#if HOTENDS > 1 && DISABLED(DUAL_X_CARRIAGE)
park_point.x += (active_extruder ? hotend_offset[X_AXIS][active_extruder] : 0);
@ -10150,7 +10210,7 @@ inline void gcode_M502() {
const float load_length = FABS(parser.seen('L') ? parser.value_axis_units(E_AXIS) :
filament_change_load_length[target_extruder]);
// Show initial message
// Show initial "wait for load" message
#if ENABLED(ULTIPANEL)
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_LOAD, ADVANCED_PAUSE_MODE_LOAD_FILAMENT, target_extruder);
#endif
@ -13176,7 +13236,10 @@ void disable_all_steppers() {
void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
if ((IS_SD_PRINTING || print_job_timer.isRunning()) && (READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING))
if ((IS_SD_PRINTING || print_job_timer.isRunning())
&& READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING
&& thermalManager.targetHotEnoughToExtrude(active_extruder)
)
handle_filament_runout();
#endif

3
Marlin/language_en.h
View File

@ -961,6 +961,9 @@
#ifndef MSG_ERR_PROBING_FAILED
#define MSG_ERR_PROBING_FAILED _UxGT("Probing failed")
#endif
#ifndef MSG_M600_TOO_COLD
#define MSG_M600_TOO_COLD _UxGT("M600: Too cold")
#endif
//
// Filament Change screens show up to 3 lines on a 4-line display

3
Marlin/temperature.h
View File

@ -196,6 +196,9 @@ class Temperature {
FORCE_INLINE static bool targetTooColdToExtrude(const uint8_t e) { UNUSED(e); return false; }
#endif
FORCE_INLINE static bool hotEnoughToExtrude(const uint8_t e) { return !tooColdToExtrude(e); }
FORCE_INLINE static bool targetHotEnoughToExtrude(const uint8_t e) { return !targetTooColdToExtrude(e); }
private:
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)

26
Marlin/ultralcd.cpp
View File

@ -1394,7 +1394,7 @@ void kill_screen(const char* lcd_msg) {
//
#if ENABLED(ADVANCED_PAUSE_FEATURE)
#if E_STEPPERS == 1 && !ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
if (!thermalManager.targetTooColdToExtrude(active_extruder))
if (thermalManager.targetHotEnoughToExtrude(active_extruder))
MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600 B0"));
else
MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_temp_menu_e0_filament_change);
@ -2599,7 +2599,7 @@ void kill_screen(const char* lcd_msg) {
#if ENABLED(ADVANCED_PAUSE_FEATURE)
if (!IS_SD_FILE_OPEN) {
#if E_STEPPERS == 1 && !ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
if (!thermalManager.targetTooColdToExtrude(active_extruder))
if (thermalManager.targetHotEnoughToExtrude(active_extruder))
MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600 B0"));
else
MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_temp_menu_e0_filament_change);
@ -4272,21 +4272,21 @@ void kill_screen(const char* lcd_msg) {
// Unload filament
#if E_STEPPERS == 1
if (!thermalManager.targetTooColdToExtrude(active_extruder))
if (thermalManager.targetHotEnoughToExtrude(active_extruder))
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD, PSTR("M702"));
else
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD, lcd_temp_menu_e0_filament_unload);
#else
#if ENABLED(FILAMENT_UNLOAD_ALL_EXTRUDERS)
if (!thermalManager.targetTooColdToExtrude(0)
if (thermalManager.targetHotEnoughToExtrude(0)
#if E_STEPPERS > 1
&& !thermalManager.targetTooColdToExtrude(1)
&& thermalManager.targetHotEnoughToExtrude(1)
#if E_STEPPERS > 2
&& !thermalManager.targetTooColdToExtrude(2)
&& thermalManager.targetHotEnoughToExtrude(2)
#if E_STEPPERS > 3
&& !thermalManager.targetTooColdToExtrude(3)
&& thermalManager.targetHotEnoughToExtrude(3)
#if E_STEPPERS > 4
&& !thermalManager.targetTooColdToExtrude(4)
&& thermalManager.targetHotEnoughToExtrude(4)
#endif // E_STEPPERS > 4
#endif // E_STEPPERS > 3
#endif // E_STEPPERS > 2
@ -4296,26 +4296,26 @@ void kill_screen(const char* lcd_msg) {
else
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD_ALL, lcd_unload_filament_all_temp_menu);
#endif
if (!thermalManager.targetTooColdToExtrude(0))
if (thermalManager.targetHotEnoughToExtrude(0))
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E1, PSTR("M702 T0"));
else
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E1, lcd_temp_menu_e0_filament_unload);
if (!thermalManager.targetTooColdToExtrude(1))
if (thermalManager.targetHotEnoughToExtrude(1))
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E2, PSTR("M702 T1"));
else
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E2, lcd_temp_menu_e1_filament_unload);
#if E_STEPPERS > 2
if (!thermalManager.targetTooColdToExtrude(2))
if (thermalManager.targetHotEnoughToExtrude(2))
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E3, PSTR("M702 T2"));
else
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E3, lcd_temp_menu_e2_filament_unload);
#if E_STEPPERS > 3
if (!thermalManager.targetTooColdToExtrude(3))
if (thermalManager.targetHotEnoughToExtrude(3))
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E4, PSTR("M702 T3"));
else
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E4, lcd_temp_menu_e3_filament_unload);
#if E_STEPPERS > 4
if (!thermalManager.targetTooColdToExtrude(4))
if (thermalManager.targetHotEnoughToExtrude(4))
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E5, PSTR("M702 T4"));
else
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E5, lcd_temp_menu_e4_filament_unload);