From a3b098b4bee1c44b59e0ab9195ae1640c938ac44 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 6 Dec 2017 13:54:58 -0600 Subject: [PATCH] Whitespace clean --- Marlin/src/HAL/HAL_LPC1768/spi_pins.h | 16 ++++++++-------- Marlin/src/pins/pins_MELZI_CREALITY.h | 2 +- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/Marlin/src/HAL/HAL_LPC1768/spi_pins.h b/Marlin/src/HAL/HAL_LPC1768/spi_pins.h index 3eec6d45d8..4016b1f72d 100644 --- a/Marlin/src/HAL/HAL_LPC1768/spi_pins.h +++ b/Marlin/src/HAL/HAL_LPC1768/spi_pins.h @@ -26,22 +26,22 @@ #include "../../inc/MarlinConfig.h" #if MB(MKS_SBASE) - -#define LPC_SOFTWARE_SPI // MKS_SBASE needs a software SPI because the + +#define LPC_SOFTWARE_SPI // MKS_SBASE needs a software SPI because the // selected pins are not on a hardware SPI controller -// A custom cable is needed. See the README file in the +// A custom cable is needed. See the README file in the // Marlin\src\config\examples\Mks\Sbase directory #define SCK_PIN P1_22 // J8-2 (moved from EXP2 P0.7) -#define MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8) -#define MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.5) -#define SS_PIN P0_28 +#define MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8) +#define MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.5) +#define SS_PIN P0_28 #else -#define LPC_SOFTWARE_SPI // Re-ARM board needs a software SPI because using the - // standard LCD adapter results in the LCD and the +#define LPC_SOFTWARE_SPI // Re-ARM board needs a software SPI because using the + // standard LCD adapter results in the LCD and the // SD card sharing a single SPI when the RepRap Full // Graphic Smart Controller is selected diff --git a/Marlin/src/pins/pins_MELZI_CREALITY.h b/Marlin/src/pins/pins_MELZI_CREALITY.h index 477a9b8e07..02f8491102 100644 --- a/Marlin/src/pins/pins_MELZI_CREALITY.h +++ b/Marlin/src/pins/pins_MELZI_CREALITY.h @@ -60,7 +60,7 @@ #define ST7920_DELAY_3 DELAY_2_NOP #if ENABLED(MINIPANEL) - #undef DOGLCD_CS + #undef DOGLCD_CS #define DOGLCD_CS LCD_PINS_RS #endif