diff --git a/Marlin/Makefile b/Marlin/Makefile index 9f2d18d268d..68dd05bdfba 100644 --- a/Marlin/Makefile +++ b/Marlin/Makefile @@ -170,112 +170,114 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1100) else ifeq ($(HARDWARE_MOTHERBOARD),1101) # Velleman K8400 Controller (derived from 3Drag Controller) else ifeq ($(HARDWARE_MOTHERBOARD),1102) -# Velleman K8600 Controller (derived from 3Drag Controller) +# Velleman K8600 Controller (Vertex Nano) else ifeq ($(HARDWARE_MOTHERBOARD),1103) -# 2PrintBeta BAM&DICE with STK drivers +# Velleman K8800 Controller (Vertex Delta) else ifeq ($(HARDWARE_MOTHERBOARD),1104) -# 2PrintBeta BAM&DICE Due with STK drivers +# 2PrintBeta BAM&DICE with STK drivers else ifeq ($(HARDWARE_MOTHERBOARD),1105) -# MKS BASE v1.0 +# 2PrintBeta BAM&DICE Due with STK drivers else ifeq ($(HARDWARE_MOTHERBOARD),1106) -# MKS v1.4 with A4982 stepper drivers +# MKS BASE v1.0 else ifeq ($(HARDWARE_MOTHERBOARD),1107) -# MKS v1.5 with Allegro A4982 stepper drivers +# MKS v1.4 with A4982 stepper drivers else ifeq ($(HARDWARE_MOTHERBOARD),1108) -# MKS v1.6 with Allegro A4982 stepper drivers +# MKS v1.5 with Allegro A4982 stepper drivers else ifeq ($(HARDWARE_MOTHERBOARD),1109) -# MKS BASE 1.0 with Heroic HR4982 stepper drivers +# MKS v1.6 with Allegro A4982 stepper drivers else ifeq ($(HARDWARE_MOTHERBOARD),1110) -# MKS GEN v1.3 or 1.4 +# MKS BASE 1.0 with Heroic HR4982 stepper drivers else ifeq ($(HARDWARE_MOTHERBOARD),1111) -# MKS GEN L +# MKS GEN v1.3 or 1.4 else ifeq ($(HARDWARE_MOTHERBOARD),1112) -# zrib V2.0 control board (Chinese knock off RAMPS replica) +# MKS GEN L else ifeq ($(HARDWARE_MOTHERBOARD),1113) -# BigTreeTech or BIQU KFB2.0 +# zrib V2.0 control board (Chinese knock off RAMPS replica) else ifeq ($(HARDWARE_MOTHERBOARD),1114) -# Felix 2.0+ Electronics Board (RAMPS like) +# BigTreeTech or BIQU KFB2.0 else ifeq ($(HARDWARE_MOTHERBOARD),1115) -# Invent-A-Part RigidBoard +# Felix 2.0+ Electronics Board (RAMPS like) else ifeq ($(HARDWARE_MOTHERBOARD),1116) -# Invent-A-Part RigidBoard V2 +# Invent-A-Part RigidBoard else ifeq ($(HARDWARE_MOTHERBOARD),1117) -# Sainsmart 2-in-1 board +# Invent-A-Part RigidBoard V2 else ifeq ($(HARDWARE_MOTHERBOARD),1118) -# Ultimaker +# Sainsmart 2-in-1 board else ifeq ($(HARDWARE_MOTHERBOARD),1119) -# Ultimaker (Older electronics. Pre 1.5.4. This is rare) +# Ultimaker else ifeq ($(HARDWARE_MOTHERBOARD),1120) +# Ultimaker (Older electronics. Pre 1.5.4. This is rare) +else ifeq ($(HARDWARE_MOTHERBOARD),1121) MCU ?= atmega1280 # Azteeg X3 -else ifeq ($(HARDWARE_MOTHERBOARD),1121) -# Azteeg X3 Pro else ifeq ($(HARDWARE_MOTHERBOARD),1122) -# Ultimainboard 2.x (Uses TEMP_SENSOR 20) +# Azteeg X3 Pro else ifeq ($(HARDWARE_MOTHERBOARD),1123) -# Rumba +# Ultimainboard 2.x (Uses TEMP_SENSOR 20) else ifeq ($(HARDWARE_MOTHERBOARD),1124) -# Raise3D Rumba +# Rumba else ifeq ($(HARDWARE_MOTHERBOARD),1125) -# Rapide Lite RL200 Rumba +# Raise3D Rumba else ifeq ($(HARDWARE_MOTHERBOARD),1126) -# Formbot T-Rex 2 Plus +# Rapide Lite RL200 Rumba else ifeq ($(HARDWARE_MOTHERBOARD),1127) -# Formbot T-Rex 3 +# Formbot T-Rex 2 Plus else ifeq ($(HARDWARE_MOTHERBOARD),1128) -# Formbot Raptor +# Formbot T-Rex 3 else ifeq ($(HARDWARE_MOTHERBOARD),1129) -# Formbot Raptor 2 +# Formbot Raptor else ifeq ($(HARDWARE_MOTHERBOARD),1130) -# bq ZUM Mega 3D +# Formbot Raptor 2 else ifeq ($(HARDWARE_MOTHERBOARD),1131) -# MakeBoard Mini v2.1.2 is a control board sold by MicroMake +# bq ZUM Mega 3D else ifeq ($(HARDWARE_MOTHERBOARD),1132) -# TriGorilla Anycubic version 1.3 based on RAMPS EFB +# MakeBoard Mini v2.1.2 is a control board sold by MicroMake else ifeq ($(HARDWARE_MOTHERBOARD),1133) -# TriGorilla Anycubic version 1.4 based on RAMPS EFB +# TriGorilla Anycubic version 1.3 based on RAMPS EFB else ifeq ($(HARDWARE_MOTHERBOARD),1134) -# TriGorilla Anycubic version 1.4 Rev 1.1 +# TriGorilla Anycubic version 1.4 based on RAMPS EFB else ifeq ($(HARDWARE_MOTHERBOARD),1135) -# Creality: Ender-4, CR-8 +# TriGorilla Anycubic version 1.4 Rev 1.1 else ifeq ($(HARDWARE_MOTHERBOARD),1136) -# Creality: CR10S, CR20, CR-X +# Creality: Ender-4, CR-8 else ifeq ($(HARDWARE_MOTHERBOARD),1137) -# Dagoma F5 +# Creality: CR10S, CR20, CR-X else ifeq ($(HARDWARE_MOTHERBOARD),1138) -# FYSETC F6 1.3 +# Dagoma F5 else ifeq ($(HARDWARE_MOTHERBOARD),1139) -# FYSETC F6 1.5 +# FYSETC F6 1.3 else ifeq ($(HARDWARE_MOTHERBOARD),1140) -# Duplicator i3 Plus +# FYSETC F6 1.5 else ifeq ($(HARDWARE_MOTHERBOARD),1141) -# VORON +# Duplicator i3 Plus else ifeq ($(HARDWARE_MOTHERBOARD),1142) -# TRONXY V3 1.0 +# VORON else ifeq ($(HARDWARE_MOTHERBOARD),1143) -# Z-Bolt X Series +# TRONXY V3 1.0 else ifeq ($(HARDWARE_MOTHERBOARD),1144) -# TT OSCAR +# Z-Bolt X Series else ifeq ($(HARDWARE_MOTHERBOARD),1145) -# Overlord/Overlord Pro +# TT OSCAR else ifeq ($(HARDWARE_MOTHERBOARD),1146) -# ADIMLab Gantry v1 +# Overlord/Overlord Pro else ifeq ($(HARDWARE_MOTHERBOARD),1147) -# ADIMLab Gantry v2 +# ADIMLab Gantry v1 else ifeq ($(HARDWARE_MOTHERBOARD),1148) -# BIQU Tango V1 +# ADIMLab Gantry v2 else ifeq ($(HARDWARE_MOTHERBOARD),1149) -# MKS GEN L V2 +# BIQU Tango V1 else ifeq ($(HARDWARE_MOTHERBOARD),1150) -# MKS GEN L V2.1 +# MKS GEN L V2 else ifeq ($(HARDWARE_MOTHERBOARD),1151) -# Copymaster 3D +# MKS GEN L V2.1 else ifeq ($(HARDWARE_MOTHERBOARD),1152) -# Ortur 4 +# Copymaster 3D else ifeq ($(HARDWARE_MOTHERBOARD),1153) -# Tenlog D3 Hero +# Ortur 4 else ifeq ($(HARDWARE_MOTHERBOARD),1154) +# Tenlog D3 Hero +else ifeq ($(HARDWARE_MOTHERBOARD),1155) # # RAMBo and derivatives diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index b9331471212..581c801feb8 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -57,57 +57,58 @@ #define BOARD_K8200 1101 // Velleman K8200 Controller (derived from 3Drag Controller) #define BOARD_K8400 1102 // Velleman K8400 Controller (derived from 3Drag Controller) #define BOARD_K8600 1103 // Velleman K8600 Controller (Vertex Nano) -#define BOARD_BAM_DICE 1104 // 2PrintBeta BAM&DICE with STK drivers -#define BOARD_BAM_DICE_DUE 1105 // 2PrintBeta BAM&DICE Due with STK drivers -#define BOARD_MKS_BASE 1106 // MKS BASE v1.0 -#define BOARD_MKS_BASE_14 1107 // MKS BASE v1.4 with Allegro A4982 stepper drivers -#define BOARD_MKS_BASE_15 1108 // MKS BASE v1.5 with Allegro A4982 stepper drivers -#define BOARD_MKS_BASE_16 1109 // MKS BASE v1.6 with Allegro A4982 stepper drivers -#define BOARD_MKS_BASE_HEROIC 1110 // MKS BASE 1.0 with Heroic HR4982 stepper drivers -#define BOARD_MKS_GEN_13 1111 // MKS GEN v1.3 or 1.4 -#define BOARD_MKS_GEN_L 1112 // MKS GEN L -#define BOARD_KFB_2 1113 // BigTreeTech or BIQU KFB2.0 -#define BOARD_ZRIB_V20 1114 // zrib V2.0 control board (Chinese knock off RAMPS replica) -#define BOARD_FELIX2 1115 // Felix 2.0+ Electronics Board (RAMPS like) -#define BOARD_RIGIDBOARD 1116 // Invent-A-Part RigidBoard -#define BOARD_RIGIDBOARD_V2 1117 // Invent-A-Part RigidBoard V2 -#define BOARD_SAINSMART_2IN1 1118 // Sainsmart 2-in-1 board -#define BOARD_ULTIMAKER 1119 // Ultimaker -#define BOARD_ULTIMAKER_OLD 1120 // Ultimaker (Older electronics. Pre 1.5.4. This is rare) -#define BOARD_AZTEEG_X3 1121 // Azteeg X3 -#define BOARD_AZTEEG_X3_PRO 1122 // Azteeg X3 Pro -#define BOARD_ULTIMAIN_2 1123 // Ultimainboard 2.x (Uses TEMP_SENSOR 20) -#define BOARD_RUMBA 1124 // Rumba -#define BOARD_RUMBA_RAISE3D 1125 // Raise3D N series Rumba derivative -#define BOARD_RL200 1126 // Rapide Lite 200 (v1, low-cost RUMBA clone with drv) -#define BOARD_FORMBOT_TREX2PLUS 1127 // Formbot T-Rex 2 Plus -#define BOARD_FORMBOT_TREX3 1128 // Formbot T-Rex 3 -#define BOARD_FORMBOT_RAPTOR 1129 // Formbot Raptor -#define BOARD_FORMBOT_RAPTOR2 1130 // Formbot Raptor 2 -#define BOARD_BQ_ZUM_MEGA_3D 1131 // bq ZUM Mega 3D -#define BOARD_MAKEBOARD_MINI 1132 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake -#define BOARD_TRIGORILLA_13 1133 // TriGorilla Anycubic version 1.3-based on RAMPS EFB -#define BOARD_TRIGORILLA_14 1134 // ... Ver 1.4 -#define BOARD_TRIGORILLA_14_11 1135 // ... Rev 1.1 (new servo pin order) -#define BOARD_RAMPS_ENDER_4 1136 // Creality: Ender-4, CR-8 -#define BOARD_RAMPS_CREALITY 1137 // Creality: CR10S, CR20, CR-X -#define BOARD_RAMPS_DAGOMA 1138 // Dagoma F5 -#define BOARD_FYSETC_F6_13 1139 // FYSETC F6 1.3 -#define BOARD_FYSETC_F6_14 1140 // FYSETC F6 1.4 -#define BOARD_DUPLICATOR_I3_PLUS 1141 // Wanhao Duplicator i3 Plus -#define BOARD_VORON 1142 // VORON Design -#define BOARD_TRONXY_V3_1_0 1143 // Tronxy TRONXY-V3-1.0 -#define BOARD_Z_BOLT_X_SERIES 1144 // Z-Bolt X Series -#define BOARD_TT_OSCAR 1145 // TT OSCAR -#define BOARD_OVERLORD 1146 // Overlord/Overlord Pro -#define BOARD_HJC2560C_REV1 1147 // ADIMLab Gantry v1 -#define BOARD_HJC2560C_REV2 1148 // ADIMLab Gantry v2 -#define BOARD_TANGO 1149 // BIQU Tango V1 -#define BOARD_MKS_GEN_L_V2 1150 // MKS GEN L V2 -#define BOARD_MKS_GEN_L_V21 1151 // MKS GEN L V2.1 -#define BOARD_COPYMASTER_3D 1152 // Copymaster 3D -#define BOARD_ORTUR_4 1153 // Ortur 4 -#define BOARD_TENLOG_D3_HERO 1154 // Tenlog D3 Hero IDEX printer +#define BOARD_K8800 1104 // Velleman K8800 Controller (Vertex Delta) +#define BOARD_BAM_DICE 1105 // 2PrintBeta BAM&DICE with STK drivers +#define BOARD_BAM_DICE_DUE 1106 // 2PrintBeta BAM&DICE Due with STK drivers +#define BOARD_MKS_BASE 1107 // MKS BASE v1.0 +#define BOARD_MKS_BASE_14 1108 // MKS BASE v1.4 with Allegro A4982 stepper drivers +#define BOARD_MKS_BASE_15 1109 // MKS BASE v1.5 with Allegro A4982 stepper drivers +#define BOARD_MKS_BASE_16 1110 // MKS BASE v1.6 with Allegro A4982 stepper drivers +#define BOARD_MKS_BASE_HEROIC 1111 // MKS BASE 1.0 with Heroic HR4982 stepper drivers +#define BOARD_MKS_GEN_13 1112 // MKS GEN v1.3 or 1.4 +#define BOARD_MKS_GEN_L 1113 // MKS GEN L +#define BOARD_KFB_2 1114 // BigTreeTech or BIQU KFB2.0 +#define BOARD_ZRIB_V20 1115 // zrib V2.0 control board (Chinese knock off RAMPS replica) +#define BOARD_FELIX2 1116 // Felix 2.0+ Electronics Board (RAMPS like) +#define BOARD_RIGIDBOARD 1117 // Invent-A-Part RigidBoard +#define BOARD_RIGIDBOARD_V2 1118 // Invent-A-Part RigidBoard V2 +#define BOARD_SAINSMART_2IN1 1119 // Sainsmart 2-in-1 board +#define BOARD_ULTIMAKER 1120 // Ultimaker +#define BOARD_ULTIMAKER_OLD 1121 // Ultimaker (Older electronics. Pre 1.5.4. This is rare) +#define BOARD_AZTEEG_X3 1122 // Azteeg X3 +#define BOARD_AZTEEG_X3_PRO 1123 // Azteeg X3 Pro +#define BOARD_ULTIMAIN_2 1124 // Ultimainboard 2.x (Uses TEMP_SENSOR 20) +#define BOARD_RUMBA 1125 // Rumba +#define BOARD_RUMBA_RAISE3D 1126 // Raise3D N series Rumba derivative +#define BOARD_RL200 1127 // Rapide Lite 200 (v1, low-cost RUMBA clone with drv) +#define BOARD_FORMBOT_TREX2PLUS 1128 // Formbot T-Rex 2 Plus +#define BOARD_FORMBOT_TREX3 1129 // Formbot T-Rex 3 +#define BOARD_FORMBOT_RAPTOR 1130 // Formbot Raptor +#define BOARD_FORMBOT_RAPTOR2 1131 // Formbot Raptor 2 +#define BOARD_BQ_ZUM_MEGA_3D 1132 // bq ZUM Mega 3D +#define BOARD_MAKEBOARD_MINI 1133 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake +#define BOARD_TRIGORILLA_13 1134 // TriGorilla Anycubic version 1.3-based on RAMPS EFB +#define BOARD_TRIGORILLA_14 1135 // ... Ver 1.4 +#define BOARD_TRIGORILLA_14_11 1136 // ... Rev 1.1 (new servo pin order) +#define BOARD_RAMPS_ENDER_4 1137 // Creality: Ender-4, CR-8 +#define BOARD_RAMPS_CREALITY 1138 // Creality: CR10S, CR20, CR-X +#define BOARD_RAMPS_DAGOMA 1139 // Dagoma F5 +#define BOARD_FYSETC_F6_13 1140 // FYSETC F6 1.3 +#define BOARD_FYSETC_F6_14 1141 // FYSETC F6 1.4 +#define BOARD_DUPLICATOR_I3_PLUS 1142 // Wanhao Duplicator i3 Plus +#define BOARD_VORON 1143 // VORON Design +#define BOARD_TRONXY_V3_1_0 1144 // Tronxy TRONXY-V3-1.0 +#define BOARD_Z_BOLT_X_SERIES 1145 // Z-Bolt X Series +#define BOARD_TT_OSCAR 1146 // TT OSCAR +#define BOARD_OVERLORD 1147 // Overlord/Overlord Pro +#define BOARD_HJC2560C_REV1 1148 // ADIMLab Gantry v1 +#define BOARD_HJC2560C_REV2 1149 // ADIMLab Gantry v2 +#define BOARD_TANGO 1150 // BIQU Tango V1 +#define BOARD_MKS_GEN_L_V2 1151 // MKS GEN L V2 +#define BOARD_MKS_GEN_L_V21 1152 // MKS GEN L V2.1 +#define BOARD_COPYMASTER_3D 1153 // Copymaster 3D +#define BOARD_ORTUR_4 1154 // Ortur 4 +#define BOARD_TENLOG_D3_HERO 1155 // Tenlog D3 Hero IDEX printer // // RAMBo and derivatives