From 8a994fb1b17010dcb584864c8a03bd4fefc229a9 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Tue, 26 Sep 2017 21:19:32 -0500
Subject: [PATCH 1/5] Fix encoder pulses for G3D_PANEL
---
Marlin/Conditionals_LCD.h | 42 +++++++++++++++++++++++++--------------
Marlin/pins_ANET_10.h | 8 ++------
Marlin/ultralcd.cpp | 8 +-------
3 files changed, 30 insertions(+), 28 deletions(-)
diff --git a/Marlin/Conditionals_LCD.h b/Marlin/Conditionals_LCD.h
index 171ca09ce08..99d6c6a9dab 100644
--- a/Marlin/Conditionals_LCD.h
+++ b/Marlin/Conditionals_LCD.h
@@ -183,23 +183,35 @@
#define ENCODER_FEEDRATE_DEADZONE 4
- #ifndef ENCODER_PULSES_PER_STEP
- #define ENCODER_PULSES_PER_STEP 1
- #endif
- #ifndef ENCODER_STEPS_PER_MENU_ITEM
- #define ENCODER_STEPS_PER_MENU_ITEM 2
- #endif
+ #define STD_ENCODER_PULSES_PER_STEP 1
+ #define STD_ENCODER_STEPS_PER_MENU_ITEM 2
+
+ #elif ENABLED(G3D_PANEL)
+
+ #define STD_ENCODER_PULSES_PER_STEP 2
+ #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
+
+ #elif ENABLED(miniVIKI) || ENABLED(VIKI2) \
+ || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
+ || ENABLED(OLED_PANEL_TINYBOY2) \
+ || ENABLED(BQ_LCD_SMART_CONTROLLER) \
+ || ENABLED(LCD_I2C_PANELOLU2) \
+ || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+ #define STD_ENCODER_PULSES_PER_STEP 4
+ #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
#endif
- // Set encoder detents for well-known controllers
- #if ENABLED(miniVIKI) || ENABLED(VIKI2) || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) || ENABLED(OLED_PANEL_TINYBOY2) \
- || ENABLED(BQ_LCD_SMART_CONTROLLER) || ENABLED(LCD_I2C_PANELOLU2) || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
- #ifndef ENCODER_PULSES_PER_STEP
- #define ENCODER_PULSES_PER_STEP 4
- #endif
- #ifndef ENCODER_STEPS_PER_MENU_ITEM
- #define ENCODER_STEPS_PER_MENU_ITEM 1
- #endif
+ #ifndef STD_ENCODER_PULSES_PER_STEP
+ #define STD_ENCODER_PULSES_PER_STEP 5
+ #endif
+ #ifndef STD_ENCODER_STEPS_PER_MENU_ITEM
+ #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
+ #endif
+ #ifndef ENCODER_PULSES_PER_STEP
+ #define ENCODER_PULSES_PER_STEP STD_ENCODER_PULSES_PER_STEP
+ #endif
+ #ifndef ENCODER_STEPS_PER_MENU_ITEM
+ #define ENCODER_STEPS_PER_MENU_ITEM STD_ENCODER_STEPS_PER_MENU_ITEM
#endif
// Shift register panels
diff --git a/Marlin/pins_ANET_10.h b/Marlin/pins_ANET_10.h
index cf97170bcdb..8668681bf4e 100644
--- a/Marlin/pins_ANET_10.h
+++ b/Marlin/pins_ANET_10.h
@@ -182,12 +182,8 @@
#define ST7920_DELAY_1 DELAY_0_NOP
#define ST7920_DELAY_2 DELAY_1_NOP
#define ST7920_DELAY_3 DELAY_2_NOP
- #ifndef ENCODER_STEPS_PER_MENU_ITEM
- #define ENCODER_STEPS_PER_MENU_ITEM 1
- #endif
- #ifndef ENCODER_PULSES_PER_STEP
- #define ENCODER_PULSES_PER_STEP 4
- #endif
+ #define STD_ENCODER_PULSES_PER_STEP 4
+ #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
#endif
#endif // ULTRA_LCD && NEWPANEL
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index 0c03dc06d18..129d53aed57 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -239,13 +239,7 @@ uint16_t max_display_update_time = 0;
////////////////////////////////////////////
#ifndef ENCODER_FEEDRATE_DEADZONE
- #define ENCODER_FEEDRATE_DEADZONE 10
- #endif
- #ifndef ENCODER_STEPS_PER_MENU_ITEM
- #define ENCODER_STEPS_PER_MENU_ITEM 5
- #endif
- #ifndef ENCODER_PULSES_PER_STEP
- #define ENCODER_PULSES_PER_STEP 1
+ #define ENCODER_FEEDRATE_DEADZONE 6
#endif
/**
From a277b43e30c59d8534cea4d23cd4cca379d4d230 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Tue, 26 Sep 2017 21:21:10 -0500
Subject: [PATCH 2/5] Fix babystep menu display
---
Marlin/language.h | 3 ---
Marlin/ultralcd.cpp | 6 +++---
2 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/Marlin/language.h b/Marlin/language.h
index 1760e135ac5..0ff6badefb4 100644
--- a/Marlin/language.h
+++ b/Marlin/language.h
@@ -198,9 +198,6 @@
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
#define MSG_TOO_COLD_FOR_M600 "M600 Hotend too cold to change filament"
-#define MSG_BABYSTEPPING_X "Babystepping X"
-#define MSG_BABYSTEPPING_Y "Babystepping Y"
-#define MSG_BABYSTEPPING_Z "Babystepping Z"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
#define MSG_ERR_EEPROM_WRITE "Error writing to EEPROM!"
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index 129d53aed57..d6a9bde7b0c 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -1014,8 +1014,8 @@ void kill_screen(const char* lcd_msg) {
}
#if ENABLED(BABYSTEP_XY)
- void _lcd_babystep_x() { _lcd_babystep(X_AXIS, PSTR(MSG_BABYSTEPPING_X)); }
- void _lcd_babystep_y() { _lcd_babystep(Y_AXIS, PSTR(MSG_BABYSTEPPING_Y)); }
+ void _lcd_babystep_x() { _lcd_babystep(X_AXIS, PSTR(MSG_BABYSTEP_X)); }
+ void _lcd_babystep_y() { _lcd_babystep(Y_AXIS, PSTR(MSG_BABYSTEP_Y)); }
void lcd_babystep_x() { lcd_goto_screen(_lcd_babystep_x); babysteps_done = 0; defer_return_to_status = true; }
void lcd_babystep_y() { lcd_goto_screen(_lcd_babystep_y); babysteps_done = 0; defer_return_to_status = true; }
#endif
@@ -1093,7 +1093,7 @@ void kill_screen(const char* lcd_msg) {
#else // !BABYSTEP_ZPROBE_OFFSET
- void _lcd_babystep_z() { _lcd_babystep(Z_AXIS, PSTR(MSG_BABYSTEPPING_Z)); }
+ void _lcd_babystep_z() { _lcd_babystep(Z_AXIS, PSTR(MSG_BABYSTEP_Z)); }
void lcd_babystep_z() { lcd_goto_screen(_lcd_babystep_z); babysteps_done = 0; defer_return_to_status = true; }
#endif // !BABYSTEP_ZPROBE_OFFSET
From bbb94b8f68d296f7ec9cb55fcc8d2c619640e946 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Tue, 26 Sep 2017 23:13:24 -0500
Subject: [PATCH 3/5] babystepping tweak
---
Marlin/temperature.cpp | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp
index 261e12cff5c..e2ea537841e 100644
--- a/Marlin/temperature.cpp
+++ b/Marlin/temperature.cpp
@@ -2098,13 +2098,10 @@ void Temperature::isr() {
#if ENABLED(BABYSTEPPING)
LOOP_XYZ(axis) {
const int curTodo = babystepsTodo[axis]; // get rid of volatile for performance
- if (curTodo > 0) {
- stepper.babystep((AxisEnum)axis, /*fwd*/true);
- babystepsTodo[axis]--;
- }
- else if (curTodo < 0) {
- stepper.babystep((AxisEnum)axis, /*fwd*/false);
- babystepsTodo[axis]++;
+ if (curTodo) {
+ stepper.babystep((AxisEnum)axis, curTodo > 0);
+ if (curTodo > 0) babystepsTodo[axis]--;
+ else babystepsTodo[axis]++;
}
}
#endif // BABYSTEPPING
From 3e28243076b70bd7b8a5b6c328ebad8de94354a7 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Mon, 28 Aug 2017 20:00:44 -0500
Subject: [PATCH 4/5] No need for LCD_PINS_Dn when unused
---
Marlin/pins_MELZI_CREALITY.h | 3 ---
1 file changed, 3 deletions(-)
diff --git a/Marlin/pins_MELZI_CREALITY.h b/Marlin/pins_MELZI_CREALITY.h
index e9199ed36a7..7981e4a491b 100644
--- a/Marlin/pins_MELZI_CREALITY.h
+++ b/Marlin/pins_MELZI_CREALITY.h
@@ -52,9 +52,6 @@
#define LCD_PINS_RS 28 // st9720 CS
#define LCD_PINS_ENABLE 17 // st9720 DAT
#define LCD_PINS_D4 30 // st9720 CLK
-#define LCD_PINS_D5 -1
-#define LCD_PINS_D6 -1
-#define LCD_PINS_D7 -1
#define FIL_RUNOUT_PIN -1 // Uses Beeper/LED Pin Pulled to GND
// Alter timing for graphical display
From e37a1ded0d0606ca0840ef9d44c6b8ab94e798fb Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Tue, 26 Sep 2017 23:49:08 -0500
Subject: [PATCH 5/5] Increase BABYSTEP_MULTIPLICATOR to 100
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
---
Marlin/Configuration_adv.h | 8 ++++----
.../AlephObjects/TAZ4/Configuration_adv.h | 8 ++++----
Marlin/example_configurations/Anet/A6/Configuration_adv.h | 6 +++---
Marlin/example_configurations/Anet/A8/Configuration_adv.h | 8 ++++----
.../BQ/Hephestos/Configuration_adv.h | 8 ++++----
.../BQ/Hephestos_2/Configuration_adv.h | 8 ++++----
.../example_configurations/BQ/WITBOX/Configuration_adv.h | 8 ++++----
.../example_configurations/Cartesio/Configuration_adv.h | 8 ++++----
Marlin/example_configurations/Felix/Configuration_adv.h | 8 ++++----
.../Infitary/i3-M508/Configuration_adv.h | 8 ++++----
.../Malyan/M150/Configuration_adv.h | 8 ++++----
.../example_configurations/RigidBot/Configuration_adv.h | 8 ++++----
Marlin/example_configurations/SCARA/Configuration_adv.h | 8 ++++----
.../Sanguinololu/Configuration_adv.h | 8 ++++----
.../example_configurations/TinyBoy2/Configuration_adv.h | 8 ++++----
.../Velleman/K8200/Configuration_adv.h | 8 ++++----
.../Velleman/K8400/Configuration_adv.h | 8 ++++----
.../delta/FLSUN/kossel_mini/Configuration_adv.h | 8 ++++----
.../delta/generic/Configuration_adv.h | 8 ++++----
.../delta/kossel_mini/Configuration_adv.h | 8 ++++----
.../delta/kossel_pro/Configuration_adv.h | 8 ++++----
.../delta/kossel_xl/Configuration_adv.h | 8 ++++----
Marlin/example_configurations/makibox/Configuration_adv.h | 8 ++++----
.../tvrrug/Round2/Configuration_adv.h | 8 ++++----
Marlin/example_configurations/wt150/Configuration_adv.h | 8 ++++----
25 files changed, 99 insertions(+), 99 deletions(-)
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 2ca25194eec..217452482f9 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
index a13ee782ec3..827010e71f9 100644
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
index 65c3d5de3ab..2a1ba65176a 100644
--- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
@@ -602,9 +602,9 @@
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
index c45bbb1bc6b..37069356893 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
index 11f2a6f37c1..9918a0ee2f7 100644
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
index a7022dc2f19..2fc64e8d90a 100644
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
index 11f2a6f37c1..9918a0ee2f7 100644
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index ba36abe8abe..5c59a77096d 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index 14f4505a28d..c7c4722a93a 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
index e0d95b7fff0..255f3a80baa 100644
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
index 0e96feb0afd..d71ff470b11 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index 9235ab2053c..545072f23aa 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index c4c8b371529..de00ef7f7a1 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
index b9a7cca4f60..fc866090114 100644
--- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
@@ -590,10 +590,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
index 9d0d24888c7..1a2413c42fb 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
index fbbf602caa1..5e7166488f8 100644
--- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
@@ -614,10 +614,10 @@
*/
#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
index e3622028d6c..f2822fc1346 100644
--- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
index 51811311483..b4cfa950e99 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -603,10 +603,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index 51811311483..b4cfa950e99 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -603,10 +603,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index 51811311483..b4cfa950e99 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -603,10 +603,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index 3f2180eb09d..d8aa82d95fb 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -608,10 +608,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index edc24a8d60e..92badf46928 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -603,10 +603,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index a72fa661be7..39fac017509 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index 267293196c6..8b36164d433 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h
index 48c57534b83..3b2d5f0a40b 100644
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.