3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-23 12:04:19 +00:00
Code Issues Releases Wiki Activity

🔧 Remove STM32F4 Print Counter Sanity Check (#24605)

Browse Source
This commit is contained in:
Keith Bennett 2022-08-19 11:11:15 -07:00 committed by Scott Lahteine
parent cfe1d52bf2
commit b4af335b7a
3 changed files with 6 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/Configuration.h
View File

@ -2362,7 +2362,7 @@
*/ */
//#define PRINTCOUNTER //#define PRINTCOUNTER
#if ENABLED(PRINTCOUNTER) #if ENABLED(PRINTCOUNTER)
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print. A value of 0 will save stats at end of print.
#endif #endif
// @section security // @section security

5
Marlin/src/HAL/STM32/inc/Conditionals_post.h
View File

@ -27,3 +27,8 @@
#elif EITHER(I2C_EEPROM, SPI_EEPROM) #elif EITHER(I2C_EEPROM, SPI_EEPROM)
#define USE_SHARED_EEPROM 1 #define USE_SHARED_EEPROM 1
#endif #endif
// Some STM32F4 boards may lose steps when saving to EEPROM during print (PR #17946)
#if defined(STM32F4xx) && PRINTCOUNTER_SAVE_INTERVAL > 0
#define PRINTCOUNTER_SYNC 1
#endif

5
Marlin/src/HAL/STM32/inc/SanityCheck.h
View File

@ -37,11 +37,6 @@
#error "SDCARD_EEPROM_EMULATION requires SDSUPPORT. Enable SDSUPPORT or choose another EEPROM emulation." #error "SDCARD_EEPROM_EMULATION requires SDSUPPORT. Enable SDSUPPORT or choose another EEPROM emulation."
#endif #endif
#if defined(STM32F4xx) && BOTH(PRINTCOUNTER, FLASH_EEPROM_EMULATION)
#warning "FLASH_EEPROM_EMULATION may cause long delays when writing and should not be used while printing."
#error "Disable PRINTCOUNTER or choose another EEPROM emulation."
#endif
#if !defined(STM32F4xx) && ENABLED(FLASH_EEPROM_LEVELING) #if !defined(STM32F4xx) && ENABLED(FLASH_EEPROM_LEVELING)
#error "FLASH_EEPROM_LEVELING is currently only supported on STM32F4 hardware." #error "FLASH_EEPROM_LEVELING is currently only supported on STM32F4 hardware."
#endif #endif