diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index fac820a814..2c68b8cbfa 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -321,17 +321,17 @@ void report_current_position(); #endif // Macro to obtain the Z position of an individual tower - #define DELTA_Z(T) raw[Z_AXIS] + _SQRT( \ - delta_diagonal_rod_2_tower[T] - HYPOT2( \ - delta_tower[T][X_AXIS] - raw[X_AXIS], \ - delta_tower[T][Y_AXIS] - raw[Y_AXIS] \ - ) \ + #define DELTA_Z(V,T) V[Z_AXIS] + _SQRT( \ + delta_diagonal_rod_2_tower[T] - HYPOT2( \ + delta_tower[T][X_AXIS] - V[X_AXIS], \ + delta_tower[T][Y_AXIS] - V[Y_AXIS] \ + ) \ ) - #define DELTA_RAW_IK() do { \ - delta[A_AXIS] = DELTA_Z(A_AXIS); \ - delta[B_AXIS] = DELTA_Z(B_AXIS); \ - delta[C_AXIS] = DELTA_Z(C_AXIS); \ + #define DELTA_IK(V) do { \ + delta[A_AXIS] = DELTA_Z(V, A_AXIS); \ + delta[B_AXIS] = DELTA_Z(V, B_AXIS); \ + delta[C_AXIS] = DELTA_Z(V, C_AXIS); \ }while(0) #elif IS_SCARA diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 51a9566dce..3679a2b2d9 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -12749,7 +12749,7 @@ void ok_to_send() { }while(0) void inverse_kinematics(const float raw[XYZ]) { - DELTA_RAW_IK(); + DELTA_IK(raw); // DELTA_DEBUG(); } @@ -13186,6 +13186,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { #if ENABLED(SCARA_FEEDRATE_SCALING) // SCARA needs to scale the feed rate from mm/s to degrees/s + // i.e., Complete the angular vector in the given time. const float inv_segment_length = min(10.0, float(segments) / cartesian_mm), // 1/mm/segs inverse_secs = inv_segment_length * _feedrate_mm_s; float oldA = stepper.get_axis_position_degrees(A_AXIS), @@ -13209,7 +13210,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { LOOP_XYZE(i) raw[i] += segment_distance[i]; #if ENABLED(DELTA) - DELTA_RAW_IK(); // Delta can inline its kinematics + DELTA_IK(raw); // Delta can inline its kinematics #else inverse_kinematics(raw); #endif @@ -13218,23 +13219,19 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { #if ENABLED(SCARA_FEEDRATE_SCALING) // For SCARA scale the feed rate from mm/s to degrees/s - // Use ratio between the length of the move and the larger angle change - const float adiff = FABS(delta[A_AXIS] - oldA), bdiff = FABS(delta[B_AXIS] - oldB); - planner.buffer_line(delta[A_AXIS], delta[B_AXIS], raw[Z_AXIS], raw[E_AXIS], HYPOT(adiff, bdiff) * inverse_secs, active_extruder); + // i.e., Complete the angular vector in the given time. + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], raw[Z_AXIS], raw[E_AXIS], HYPOT(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB) * inverse_secs, active_extruder); oldA = delta[A_AXIS]; oldB = delta[B_AXIS]; #else planner.buffer_line(delta[A_AXIS], delta[B_AXIS], raw[Z_AXIS], raw[E_AXIS], _feedrate_mm_s, active_extruder); #endif } - // Since segment_distance is only approximate, - // the final move must be to the exact destination. - + // Ensure last segment arrives at target location. #if ENABLED(SCARA_FEEDRATE_SCALING) inverse_kinematics(rtarget); ADJUST_DELTA(rtarget); - const float adiff = FABS(delta[A_AXIS] - oldA), bdiff = FABS(delta[B_AXIS] - oldB); - planner.buffer_line(delta[A_AXIS], delta[B_AXIS], rtarget[Z_AXIS], rtarget[E_AXIS], HYPOT(adiff, bdiff) * inverse_secs, active_extruder); + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], rtarget[Z_AXIS], rtarget[E_AXIS], HYPOT(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB) * inverse_secs, active_extruder); #else planner.buffer_line_kinematic(rtarget, _feedrate_mm_s, active_extruder); #endif @@ -13572,20 +13569,12 @@ void prepare_move_to_destination() { clamp_to_software_endstops(raw); - #if IS_KINEMATIC - #if ENABLED(DELTA) - DELTA_RAW_IK(); // Delta can inline its kinematics - #else - inverse_kinematics(raw); - #endif - ADJUST_DELTA(raw); // Adjust Z if bed leveling is enabled - #endif - #if ENABLED(SCARA_FEEDRATE_SCALING) // For SCARA scale the feed rate from mm/s to degrees/s - // With segments > 1 length is 1 segment, otherwise total length - const float adiff = FABS(delta[A_AXIS] - oldA), bdiff = FABS(delta[B_AXIS] - oldB); - planner.buffer_line(delta[A_AXIS], delta[B_AXIS], raw[Z_AXIS], raw[E_AXIS], HYPOT(adiff, bdiff) * inverse_secs, active_extruder); + // i.e., Complete the angular vector in the given time. + inverse_kinematics(raw); + ADJUST_DELTA(raw); + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], raw[Z_AXIS], raw[E_AXIS], HYPOT(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB) * inverse_secs, active_extruder); oldA = delta[A_AXIS]; oldB = delta[B_AXIS]; #else planner.buffer_line_kinematic(raw, fr_mm_s, active_extruder); @@ -13596,8 +13585,7 @@ void prepare_move_to_destination() { #if ENABLED(SCARA_FEEDRATE_SCALING) inverse_kinematics(cart); ADJUST_DELTA(cart); - const float adiff = FABS(delta[A_AXIS] - oldA), bdiff = FABS(delta[B_AXIS] - oldB); - planner.buffer_line(delta[A_AXIS], delta[B_AXIS], cart[Z_AXIS], cart[E_AXIS], HYPOT(adiff, bdiff) * inverse_secs, active_extruder); + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], cart[Z_AXIS], cart[E_AXIS], HYPOT(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB) * inverse_secs, active_extruder); #else planner.buffer_line_kinematic(cart, fr_mm_s, active_extruder); #endif diff --git a/Marlin/ubl_motion.cpp b/Marlin/ubl_motion.cpp index 07a8b1a86e..33570af345 100644 --- a/Marlin/ubl_motion.cpp +++ b/Marlin/ubl_motion.cpp @@ -422,7 +422,7 @@ #if ENABLED(DELTA) // apply delta inverse_kinematics - DELTA_RAW_IK(); + DELTA_IK(raw); planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], in_raw[E_AXIS], fr, active_extruder); #elif IS_SCARA // apply scara inverse_kinematics (should be changed to save raw->logical->raw)