diff --git a/Marlin/src/feature/tmc_util.h b/Marlin/src/feature/tmc_util.h
index 00560d0ef93..094b65e9b7b 100644
--- a/Marlin/src/feature/tmc_util.h
+++ b/Marlin/src/feature/tmc_util.h
@@ -53,7 +53,7 @@ void tmc_get_current(TMC &st, const TMC_AxisEnum axis) {
   _tmc_say_current(axis, st.getCurrent());
 }
 template<typename TMC>
-void tmc_set_current(TMC &st, const TMC_AxisEnum axis, const int mA) {
+void tmc_set_current(TMC &st, const int mA) {
   st.setCurrent(mA, R_SENSE, HOLD_MULTIPLIER);
 }
 template<typename TMC>
@@ -70,7 +70,7 @@ void tmc_get_pwmthrs(TMC &st, const TMC_AxisEnum axis, const uint16_t spmm) {
   _tmc_say_pwmthrs(axis, _tmc_thrs(st.microsteps(), st.TPWMTHRS(), spmm));
 }
 template<typename TMC>
-void tmc_set_pwmthrs(TMC &st, const TMC_AxisEnum axis, const int32_t thrs, const uint32_t spmm) {
+void tmc_set_pwmthrs(TMC &st, const int32_t thrs, const uint32_t spmm) {
   st.TPWMTHRS(_tmc_thrs(st.microsteps(), thrs, spmm));
 }
 template<typename TMC>
@@ -78,7 +78,7 @@ void tmc_get_sgt(TMC &st, const TMC_AxisEnum axis) {
   _tmc_say_sgt(axis, st.sgt());
 }
 template<typename TMC>
-void tmc_set_sgt(TMC &st, const TMC_AxisEnum axis, const int8_t sgt_val) {
+void tmc_set_sgt(TMC &st, const int8_t sgt_val) {
   st.sgt(sgt_val);
 }
 
diff --git a/Marlin/src/gcode/feature/trinamic/M906.cpp b/Marlin/src/gcode/feature/trinamic/M906.cpp
index 8ba6453339b..1ac22641cfc 100644
--- a/Marlin/src/gcode/feature/trinamic/M906.cpp
+++ b/Marlin/src/gcode/feature/trinamic/M906.cpp
@@ -34,7 +34,7 @@
  */
 void GcodeSuite::M906() {
   #define TMC_SAY_CURRENT(Q) tmc_get_current(stepper##Q, TMC_##Q)
-  #define TMC_SET_CURRENT(Q) tmc_set_current(stepper##Q, TMC_##Q, value)
+  #define TMC_SET_CURRENT(Q) tmc_set_current(stepper##Q, value)
 
   bool report = true;
   const uint8_t index = parser.byteval('I');
diff --git a/Marlin/src/gcode/feature/trinamic/M911-M915.cpp b/Marlin/src/gcode/feature/trinamic/M911-M915.cpp
index d2f755344e7..1e29babae93 100644
--- a/Marlin/src/gcode/feature/trinamic/M911-M915.cpp
+++ b/Marlin/src/gcode/feature/trinamic/M911-M915.cpp
@@ -30,42 +30,48 @@
 #include "../../../module/planner.h"
 #include "../../queue.h"
 
+#define M91x_USE(A) (ENABLED(A##_IS_TMC2130) || (ENABLED(A##_IS_TMC2208) && PIN_EXISTS(A##_SERIAL_RX)))
+#define M91x_USE_X  (ENABLED(IS_TRAMS) || M91x_USE(X))
+#define M91x_USE_Y  (ENABLED(IS_TRAMS) || M91x_USE(Y))
+#define M91x_USE_Z  (ENABLED(IS_TRAMS) || M91x_USE(Z))
+#define M91x_USE_E0 (ENABLED(IS_TRAMS) || M91x_USE(E0))
+
 /**
  * M911: Report TMC stepper driver overtemperature pre-warn flag
  *       This flag is held by the library, persisting until cleared by M912
  */
 void GcodeSuite::M911() {
-  #if ENABLED(X_IS_TMC2130) || (ENABLED(X_IS_TMC2208) && PIN_EXISTS(X_SERIAL_RX)) || ENABLED(IS_TRAMS)
+  #if M91x_USE_X
     tmc_report_otpw(stepperX, TMC_X);
   #endif
-  #if ENABLED(X2_IS_TMC2130) || (ENABLED(X2_IS_TMC2208) && PIN_EXISTS(X2_SERIAL_RX))
+  #if M91x_USE(X2)
     tmc_report_otpw(stepperX2, TMC_X2);
   #endif
-  #if ENABLED(Y_IS_TMC2130) || (ENABLED(Y_IS_TMC2208) && PIN_EXISTS(Y_SERIAL_RX)) || ENABLED(IS_TRAMS)
+  #if M91x_USE_Y
     tmc_report_otpw(stepperY, TMC_Y);
   #endif
-  #if ENABLED(Y2_IS_TMC2130) || (ENABLED(Y2_IS_TMC2208) && PIN_EXISTS(Y2_SERIAL_RX))
+  #if M91x_USE(Y2)
     tmc_report_otpw(stepperY2, TMC_Y2);
   #endif
-  #if ENABLED(Z_IS_TMC2130) || (ENABLED(Z_IS_TMC2208) && PIN_EXISTS(Z_SERIAL_RX)) || ENABLED(IS_TRAMS)
+  #if M91x_USE_Z
     tmc_report_otpw(stepperZ, TMC_Z);
   #endif
-  #if ENABLED(Z2_IS_TMC2130) || (ENABLED(Z2_IS_TMC2208) && PIN_EXISTS(Z2_SERIAL_RX))
+  #if M91x_USE(Z2)
     tmc_report_otpw(stepperZ2, TMC_Z2);
   #endif
-  #if ENABLED(E0_IS_TMC2130) || (ENABLED(E0_IS_TMC2208) && PIN_EXISTS(E0_SERIAL_RX)) || ENABLED(IS_TRAMS)
+  #if M91x_USE_E0
     tmc_report_otpw(stepperE0, TMC_E0);
   #endif
-  #if ENABLED(E1_IS_TMC2130) || (ENABLED(E1_IS_TMC2208) && PIN_EXISTS(E1_SERIAL_RX))
+  #if M91x_USE(E1)
     tmc_report_otpw(stepperE1, TMC_E1);
   #endif
-  #if ENABLED(E2_IS_TMC2130) || (ENABLED(E2_IS_TMC2208) && PIN_EXISTS(E2_SERIAL_RX))
+  #if M91x_USE(E2)
     tmc_report_otpw(stepperE2, TMC_E2);
   #endif
-  #if ENABLED(E3_IS_TMC2130) || (ENABLED(E3_IS_TMC2208) && PIN_EXISTS(E3_SERIAL_RX))
+  #if M91x_USE(E3)
     tmc_report_otpw(stepperE3, TMC_E3);
   #endif
-  #if ENABLED(E4_IS_TMC2130) || (ENABLED(E4_IS_TMC2208) && PIN_EXISTS(E4_SERIAL_RX))
+  #if M91x_USE(E4)
     tmc_report_otpw(stepperE4, TMC_E4);
   #endif
 }
@@ -83,45 +89,61 @@ void GcodeSuite::M911() {
  *       M912 E1  ; clear E1 only
  */
 void GcodeSuite::M912() {
-  const bool hasX = parser.seen(axis_codes[X_AXIS]), hasY = parser.seen(axis_codes[Y_AXIS]),
-             hasZ = parser.seen(axis_codes[Z_AXIS]), hasE = parser.seen(axis_codes[E_AXIS]),
-             hasNone = !hasX && !hasY && !hasZ && !hasE;
-  const uint8_t xval = parser.byteval(axis_codes[X_AXIS], 10), yval = parser.byteval(axis_codes[Y_AXIS], 10),
-                zval = parser.byteval(axis_codes[Z_AXIS], 10), eval = parser.byteval(axis_codes[E_AXIS], 10);
+    const bool hasX = parser.seen(axis_codes[X_AXIS]),
+               hasY = parser.seen(axis_codes[Y_AXIS]),
+               hasZ = parser.seen(axis_codes[Z_AXIS]),
+               hasE = parser.seen(axis_codes[E_AXIS]),
+               hasNone = !hasX && !hasY && !hasZ && !hasE;
 
-  #if (ENABLED(X_IS_TMC2130) || (ENABLED(X_IS_TMC2208) && PIN_EXISTS(X_SERIAL_RX)) || ENABLED(IS_TRAMS))
-    if (hasNone || xval == 1 || (hasX && xval == 10)) tmc_clear_otpw(stepperX, TMC_X);
-  #endif
-  #if (ENABLED(X2_IS_TMC2130) || (ENABLED(X2_IS_TMC2208) && PIN_EXISTS(X2_SERIAL_RX)))
-    if (hasNone || xval == 2 || (hasX && xval == 10)) tmc_clear_otpw(stepperX2, TMC_X2);
-  #endif
-  #if (ENABLED(Y_IS_TMC2130) || (ENABLED(Y_IS_TMC2208) && PIN_EXISTS(Y_SERIAL_RX)) || ENABLED(IS_TRAMS))
-    if (hasNone || yval == 1 || (hasY && yval == 10)) tmc_clear_otpw(stepperY, TMC_Y);
-  #endif
-  #if (ENABLED(Y2_IS_TMC2130) || (ENABLED(Y2_IS_TMC2208) && PIN_EXISTS(Y2_SERIAL_RX)))
-    if (hasNone || yval == 2 || (hasY && yval == 10)) tmc_clear_otpw(stepperY2, TMC_Y2);
-  #endif
-  #if (ENABLED(Z_IS_TMC2130) || (ENABLED(Z_IS_TMC2208) && PIN_EXISTS(Z_SERIAL_RX)) || ENABLED(IS_TRAMS))
-    if (hasNone || zval == 1 || (hasZ && zval == 10)) tmc_clear_otpw(stepperZ, TMC_Z);
-  #endif
-  #if (ENABLED(Z2_IS_TMC2130) || (ENABLED(Z2_IS_TMC2208) && PIN_EXISTS(Z2_SERIAL_RX)))
-    if (hasNone || zval == 2 || (hasZ && zval == 10)) tmc_clear_otpw(stepperZ2, TMC_Z2);
-  #endif
-  #if (ENABLED(E0_IS_TMC2130) || (ENABLED(E0_IS_TMC2208) && PIN_EXISTS(E0_SERIAL_RX)) || ENABLED(IS_TRAMS))
-    if (hasNone || eval == 0 || (hasE && eval == 10)) tmc_clear_otpw(stepperE0, TMC_E0);
-  #endif
-  #if E_STEPPERS > 1 && (ENABLED(E1_IS_TMC2130) || (ENABLED(E1_IS_TMC2208) && PIN_EXISTS(E1_SERIAL_RX)))
-    if (hasNone || eval == 1 || (hasE && eval == 10)) tmc_clear_otpw(stepperE1, TMC_E1);
-  #endif
-  #if E_STEPPERS > 2 && (ENABLED(E2_IS_TMC2130) || (ENABLED(E2_IS_TMC2208) && PIN_EXISTS(E2_SERIAL_RX)))
-    if (hasNone || eval == 2 || (hasE && eval == 10)) tmc_clear_otpw(stepperE2, TMC_E2);
-  #endif
-  #if E_STEPPERS > 3 && (ENABLED(E3_IS_TMC2130) || (ENABLED(E3_IS_TMC2208) && PIN_EXISTS(E3_SERIAL_RX)))
-    if (hasNone || eval == 3 || (hasE && eval == 10)) tmc_clear_otpw(stepperE3, TMC_E3);
-  #endif
-  #if E_STEPPERS > 4 && (ENABLED(E4_IS_TMC2130) || (ENABLED(E4_IS_TMC2208) && PIN_EXISTS(E4_SERIAL_RX)))
-    if (hasNone || eval == 4 || (hasE && eval == 10)) tmc_clear_otpw(stepperE4, TMC_E4);
-  #endif
+    #if M91x_USE_X || M91x_USE(X2)
+      const uint8_t xval = parser.byteval(axis_codes[X_AXIS], 10);
+      #if M91x_USE_X
+        if (hasNone || xval == 1 || (hasX && xval == 10)) tmc_clear_otpw(stepperX, TMC_X);
+      #endif
+      #if M91x_USE(X2)
+        if (hasNone || xval == 2 || (hasX && xval == 10)) tmc_clear_otpw(stepperX2, TMC_X2);
+      #endif
+    #endif
+
+    #define M91x_USE_Y (M91x_USE(Y) || ENABLED(IS_TRAMS))
+    #if M91x_USE_Y || M91x_USE(Y2)
+      const uint8_t yval = parser.byteval(axis_codes[Y_AXIS], 10);
+      #if M91x_USE_Y
+        if (hasNone || yval == 1 || (hasY && yval == 10)) tmc_clear_otpw(stepperY, TMC_Y);
+      #endif
+      #if M91x_USE(Y2)
+        if (hasNone || yval == 2 || (hasY && yval == 10)) tmc_clear_otpw(stepperY2, TMC_Y2);
+      #endif
+    #endif
+
+    #define M91x_USE_Z (M91x_USE(Z) || ENABLED(IS_TRAMS))
+    #if M91x_USE_Z || M91x_USE(Z2)
+      const uint8_t zval = parser.byteval(axis_codes[Z_AXIS], 10);
+      #if M91x_USE_Z
+        if (hasNone || zval == 1 || (hasZ && zval == 10)) tmc_clear_otpw(stepperZ, TMC_Z);
+      #endif
+      #if M91x_USE(Z2)
+        if (hasNone || zval == 2 || (hasZ && zval == 10)) tmc_clear_otpw(stepperZ2, TMC_Z2);
+      #endif
+    #endif
+
+    const uint8_t eval = parser.byteval(axis_codes[E_AXIS], 10);
+
+    #if M91x_USE_E0
+      if (hasNone || eval == 0 || (hasE && eval == 10)) tmc_clear_otpw(stepperE0, TMC_E0);
+    #endif
+    #if E_STEPPERS > 1 && M91x_USE(E1)
+      if (hasNone || eval == 1 || (hasE && eval == 10)) tmc_clear_otpw(stepperE1, TMC_E1);
+    #endif
+    #if E_STEPPERS > 2 && M91x_USE(E2)
+      if (hasNone || eval == 2 || (hasE && eval == 10)) tmc_clear_otpw(stepperE2, TMC_E2);
+    #endif
+    #if E_STEPPERS > 3 && M91x_USE(E3)
+      if (hasNone || eval == 3 || (hasE && eval == 10)) tmc_clear_otpw(stepperE3, TMC_E3);
+    #endif
+    #if E_STEPPERS > 4 && M91x_USE(E4)
+      if (hasNone || eval == 4 || (hasE && eval == 10)) tmc_clear_otpw(stepperE4, TMC_E4);
+    #endif
 }
 
 /**
@@ -130,9 +152,9 @@ void GcodeSuite::M912() {
 #if ENABLED(HYBRID_THRESHOLD)
   void GcodeSuite::M913() {
     #define TMC_SAY_PWMTHRS(P,Q) tmc_get_pwmthrs(stepper##Q, TMC_##Q, planner.axis_steps_per_mm[P##_AXIS])
-    #define TMC_SET_PWMTHRS(P,Q) tmc_set_pwmthrs(stepper##Q, TMC_##Q, value, planner.axis_steps_per_mm[P##_AXIS])
+    #define TMC_SET_PWMTHRS(P,Q) tmc_set_pwmthrs(stepper##Q, value, planner.axis_steps_per_mm[P##_AXIS])
     #define TMC_SAY_PWMTHRS_E(E) do{ const uint8_t extruder = E; tmc_get_pwmthrs(stepperE##E, TMC_E##E, planner.axis_steps_per_mm[E_AXIS_N]); }while(0)
-    #define TMC_SET_PWMTHRS_E(E) do{ const uint8_t extruder = E; tmc_set_pwmthrs(stepperE##E, TMC_E##E, value, planner.axis_steps_per_mm[E_AXIS_N]); }while(0)
+    #define TMC_SET_PWMTHRS_E(E) do{ const uint8_t extruder = E; tmc_set_pwmthrs(stepperE##E, value, planner.axis_steps_per_mm[E_AXIS_N]); }while(0)
 
     bool report = true;
     const uint8_t index = parser.byteval('I');
@@ -238,7 +260,7 @@ void GcodeSuite::M912() {
 #if ENABLED(SENSORLESS_HOMING)
   void GcodeSuite::M914() {
     #define TMC_SAY_SGT(Q) tmc_get_sgt(stepper##Q, TMC_##Q)
-    #define TMC_SET_SGT(Q) tmc_set_sgt(stepper##Q, TMC_##Q, value)
+    #define TMC_SET_SGT(Q) tmc_set_sgt(stepper##Q, value)
 
     bool report = true;
     const uint8_t index = parser.byteval('I');
diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp
index 873ac49d0ca..2cb4c5fdc3b 100644
--- a/Marlin/src/module/configuration_store.cpp
+++ b/Marlin/src/module/configuration_store.cpp
@@ -1326,7 +1326,7 @@ void MarlinSettings::postprocess() {
       #endif
 
       #if ENABLED(HYBRID_THRESHOLD)
-        #define TMC_SET_PWMTHRS(P,Q) tmc_set_pwmthrs(stepper##Q, TMC_##Q, tmc_hybrid_threshold[TMC_##Q], planner.axis_steps_per_mm[P##_AXIS])
+        #define TMC_SET_PWMTHRS(P,Q) tmc_set_pwmthrs(stepper##Q, tmc_hybrid_threshold[TMC_##Q], planner.axis_steps_per_mm[P##_AXIS])
         uint32_t tmc_hybrid_threshold[TMC_AXES];
         EEPROM_READ(tmc_hybrid_threshold);
         if (!validating) {
diff --git a/Marlin/src/module/stepper_indirection.cpp b/Marlin/src/module/stepper_indirection.cpp
index 7052c3a45a4..be62f9d3087 100644
--- a/Marlin/src/module/stepper_indirection.cpp
+++ b/Marlin/src/module/stepper_indirection.cpp
@@ -184,6 +184,10 @@
   // Following values from Trinamic's spreadsheet with values for a NEMA17 (42BYGHW609)
   // https://www.trinamic.com/products/integrated-circuits/details/tmc2130/
   void tmc2130_init(TMC2130Stepper &st, const uint16_t mA, const uint16_t microsteps, const uint32_t thrs, const float spmm) {
+    #if DISABLED(STEALTHCHOP) || DISABLED(HYBRID_THRESHOLD)
+      UNUSED(thrs);
+      UNUSED(spmm);
+    #endif
     st.begin();
     st.setCurrent(mA, R_SENSE, HOLD_MULTIPLIER);
     st.microsteps(microsteps);
@@ -201,9 +205,6 @@
       st.stealthChop(1);
       #if ENABLED(HYBRID_THRESHOLD)
         st.stealth_max_speed(12650000UL*microsteps/(256*thrs*spmm));
-      #else
-        UNUSED(thrs);
-        UNUSED(spmm);
       #endif
     #elif ENABLED(SENSORLESS_HOMING)
       st.coolstep_min_speed(1024UL * 1024UL - 1UL);