diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h
index 81d53563ec..174ec404a7 100644
--- a/Marlin/src/core/boards.h
+++ b/Marlin/src/core/boards.h
@@ -476,7 +476,8 @@
#define BOARD_BTT_SKR_V3_0 6006 // BigTreeTech SKR V3.0 (STM32H743VI / STM32H723VG)
#define BOARD_BTT_SKR_V3_0_EZ 6007 // BigTreeTech SKR V3.0 EZ (STM32H743VI / STM32H723VG)
#define BOARD_BTT_OCTOPUS_MAX_EZ_V1_0 6008 // BigTreeTech Octopus Max EZ V1.0 (STM32H723ZE)
-#define BOARD_BTT_OCTOPUS_PRO_V1_1 6009 // BigTreeTech Octopus Pro v1.1 (STM32H723ZE)
+#define BOARD_BTT_OCTOPUS_PRO_V1_0_1 6009 // BigTreeTech Octopus Pro v1.0.1 (STM32H723ZE)
+#define BOARD_BTT_OCTOPUS_PRO_V1_1 6010 // BigTreeTech Octopus Pro v1.1 (STM32H723ZE)
//
// Espressif ESP32 WiFi
diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h
index 73152954ca..f9c2d08ba2 100644
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@@ -829,6 +829,8 @@
#include "stm32h7/pins_BTT_SKR_V3_0_EZ.h" // STM32H7 env:STM32H743VI_btt env:STM32H723VG_btt
#elif MB(BTT_OCTOPUS_MAX_EZ_V1_0)
#include "stm32h7/pins_BTT_OCTOPUS_MAX_EZ.h" // STM32H7 env:STM32H723ZE_btt
+#elif MB(BTT_OCTOPUS_PRO_V1_0_1)
+ #include "stm32h7/pins_BTT_OCTOPUS_PRO_V1_0_1.h" // STM32H7 env:STM32H723ZE_btt
#elif MB(BTT_OCTOPUS_PRO_V1_1)
#include "stm32h7/pins_BTT_OCTOPUS_PRO_V1_1.h" // STM32H7 env:STM32H723ZE_btt
#elif MB(TEENSY41)
diff --git a/Marlin/src/pins/stm32h7/pins_BTT_OCTOPUS_PRO_V1_0_1.h b/Marlin/src/pins/stm32h7/pins_BTT_OCTOPUS_PRO_V1_0_1.h
new file mode 100644
index 0000000000..e5d3a98cfc
--- /dev/null
+++ b/Marlin/src/pins/stm32h7/pins_BTT_OCTOPUS_PRO_V1_0_1.h
@@ -0,0 +1,44 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+#define BOARD_INFO_NAME "OCTOPUS PRO V1.0.1"
+
+#include "pins_BTT_OCTOPUS_PRO_V1_common.h"
+
+//
+// Steppers
+//
+#define Z2_ENABLE_PIN PA0
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN PA2 // Heater0
+#define HEATER_2_PIN PB10 // Heater2
+
+//
+// NeoPixel LED
+//
+#ifndef NEOPIXEL_PIN
+ #define NEOPIXEL_PIN PB0
+#endif
diff --git a/Marlin/src/pins/stm32h7/pins_BTT_OCTOPUS_PRO_V1_1.h b/Marlin/src/pins/stm32h7/pins_BTT_OCTOPUS_PRO_V1_1.h
index 64e1b828f0..f3671cf821 100644
--- a/Marlin/src/pins/stm32h7/pins_BTT_OCTOPUS_PRO_V1_1.h
+++ b/Marlin/src/pins/stm32h7/pins_BTT_OCTOPUS_PRO_V1_1.h
@@ -21,522 +21,20 @@
*/
#pragma once
-#include "env_validate.h"
-
#define BOARD_INFO_NAME "BTT OCTOPUS PRO V1.1"
-#define HAS_OTG_USB_HOST_SUPPORT // USB Flash Drive support
-#define USES_DIAG_JUMPERS
-
-// Onboard I2C EEPROM
-#if ANY(NO_EEPROM_SELECTED, I2C_EEPROM)
- #undef NO_EEPROM_SELECTED
- #define I2C_EEPROM
- #define MARLIN_EEPROM_SIZE 0x1000 // 4K (AT24C32)
- #define SOFT_I2C_EEPROM // Force the use of Software I2C
- #define I2C_SCL_PIN PB8
- #define I2C_SDA_PIN PB9
-#endif
-
-// Avoid conflict with TIMER_TONE
-#define STEP_TIMER 8
-
-//
-// Servos
-//
-#define SERVO0_PIN PB6
-
-//
-// Trinamic Stallguard pins
-//
-#define X_DIAG_PIN PG6 // X-STOP
-#define Y_DIAG_PIN PG9 // Y-STOP
-#define Z_DIAG_PIN PG10 // Z-STOP
-#define Z2_DIAG_PIN PG11 // Z2-STOP
-#define E0_DIAG_PIN PG12 // E0DET
-#define E1_DIAG_PIN PG13 // E1DET
-#define E2_DIAG_PIN PG14 // E2DET
-#define E3_DIAG_PIN PG15 // E3DET
-
-//
-// Limit Switches
-//
-#ifdef X_STALL_SENSITIVITY
- #define X_STOP_PIN X_DIAG_PIN
- #if X_HOME_TO_MIN
- #define X_MAX_PIN E0_DIAG_PIN // E0DET
- #else
- #define X_MIN_PIN E0_DIAG_PIN // E0DET
- #endif
-#elif NEEDS_X_MINMAX
- #ifndef X_MIN_PIN
- #define X_MIN_PIN X_DIAG_PIN // X-STOP
- #endif
- #ifndef X_MAX_PIN
- #define X_MAX_PIN E0_DIAG_PIN // E0DET
- #endif
-#else
- #define X_STOP_PIN X_DIAG_PIN // X-STOP
-#endif
-
-#ifdef Y_STALL_SENSITIVITY
- #define Y_STOP_PIN Y_DIAG_PIN
- #if Y_HOME_TO_MIN
- #define Y_MAX_PIN E1_DIAG_PIN // E1DET
- #else
- #define Y_MIN_PIN E1_DIAG_PIN // E1DET
- #endif
-#elif NEEDS_Y_MINMAX
- #ifndef Y_MIN_PIN
- #define Y_MIN_PIN Y_DIAG_PIN // Y-STOP
- #endif
- #ifndef Y_MAX_PIN
- #define Y_MAX_PIN E1_DIAG_PIN // E1DET
- #endif
-#else
- #define Y_STOP_PIN Y_DIAG_PIN // Y-STOP
-#endif
-
-#ifdef Z_STALL_SENSITIVITY
- #define Z_STOP_PIN Z_DIAG_PIN
- #if Z_HOME_TO_MIN
- #define Z_MAX_PIN E2_DIAG_PIN // PWRDET
- #else
- #define Z_MIN_PIN E2_DIAG_PIN // PWRDET
- #endif
-#elif NEEDS_Z_MINMAX
- #ifndef Z_MIN_PIN
- #define Z_MIN_PIN Z_DIAG_PIN // Z-STOP
- #endif
- #ifndef Z_MAX_PIN
- #define Z_MAX_PIN E2_DIAG_PIN // PWRDET
- #endif
-#else
- #define Z_STOP_PIN Z_DIAG_PIN // Z-STOP
-#endif
-
-//
-// Z Probe (when not Z_MIN_PIN)
-//
-#ifndef Z_MIN_PROBE_PIN
- #if DISABLED(BLTOUCH)
- #define Z_MIN_PROBE_PIN PC5 // Probe (Proximity switch) port
- #else
- #define Z_MIN_PROBE_PIN PB7
- #endif
-#endif
-
-//
-// Filament Runout Sensor
-//
-#define FIL_RUNOUT_PIN PG12 // E0DET
-#define FIL_RUNOUT2_PIN PG13 // E1DET
-#define FIL_RUNOUT3_PIN PG14 // E2DET
-#define FIL_RUNOUT4_PIN PG15 // E3DET
-
-//
-// Power Supply Control
-//
-#ifndef PS_ON_PIN
- #define PS_ON_PIN PE11 // PS-ON
-#endif
-
-//
-// Power Loss Detection
-//
-#ifndef POWER_LOSS_PIN
- #define POWER_LOSS_PIN PC0 // PWRDET
-#endif
-
-//
-// Misc. Functions
-//
-#define LED_PIN PA13
+#include "pins_BTT_OCTOPUS_PRO_V1_common.h"
//
// Steppers
//
-#define X_STEP_PIN PF13 // MOTOR 0
-#define X_DIR_PIN PF12
-#define X_ENABLE_PIN PF14
-#ifndef X_CS_PIN
- #define X_CS_PIN PC4
-#endif
-
-#define Y_STEP_PIN PG0 // MOTOR 1
-#define Y_DIR_PIN PG1
-#define Y_ENABLE_PIN PF15
-#ifndef Y_CS_PIN
- #define Y_CS_PIN PD11
-#endif
-
-#define Z_STEP_PIN PF11 // MOTOR 2
-#define Z_DIR_PIN PG3
-#define Z_ENABLE_PIN PG5
-#ifndef Z_CS_PIN
- #define Z_CS_PIN PC6
-#endif
-
-#define Z2_STEP_PIN PG4 // MOTOR 3
-#define Z2_DIR_PIN PC1
#define Z2_ENABLE_PIN PA2
-#ifndef Z2_CS_PIN
- #define Z2_CS_PIN PC7
-#endif
-
-#define E0_STEP_PIN PF9 // MOTOR 4
-#define E0_DIR_PIN PF10
-#define E0_ENABLE_PIN PG2
-#ifndef E0_CS_PIN
- #define E0_CS_PIN PF2
-#endif
-
-#define E1_STEP_PIN PC13 // MOTOR 5
-#define E1_DIR_PIN PF0
-#define E1_ENABLE_PIN PF1
-#ifndef E1_CS_PIN
- #define E1_CS_PIN PE4
-#endif
-
-#define E2_STEP_PIN PE2 // MOTOR 6
-#define E2_DIR_PIN PE3
-#define E2_ENABLE_PIN PD4
-#ifndef E2_CS_PIN
-
- #define E2_CS_PIN PE1
-#endif
-
-#define E3_STEP_PIN PE6 // MOTOR 7
-#define E3_DIR_PIN PA14
-#define E3_ENABLE_PIN PE0
-#ifndef E3_CS_PIN
- #define E3_CS_PIN PD3
-#endif
-
-//
-// Temperature Sensors
-//
-#define TEMP_BED_PIN PF3 // TB
-#define TEMP_1_PIN PF5 // TH1
-#define TEMP_2_PIN PF6 // TH2
-#define TEMP_3_PIN PF7 // TH3
-
-#if TEMP_SENSOR_0 == -5
- #define TEMP_0_CS_PIN PF8 // Max31865 CS
- #define TEMP_0_SCK_PIN PA5
- #define TEMP_0_MISO_PIN PA6
- #define TEMP_0_MOSI_PIN PA7
- #define SOFTWARE_SPI // Max31865 and LCD SD share a set of SPIs, Set SD to softwareSPI for Max31865
- #define FORCE_SOFT_SPI
-#else
- #define TEMP_0_PIN PF4 // TH0
-#endif
//
// Heaters / Fans
//
-#define HEATER_BED_PIN PA1 // Hotbed
#define HEATER_0_PIN PA0 // Heater0
-#define HEATER_1_PIN PA3 // Heater1
#define HEATER_2_PIN PB0 // Heater2
-#define HEATER_3_PIN PB11 // Heater3
-
-#define FAN0_PIN PA8 // Fan0
-#define FAN1_PIN PE5 // Fan1
-#define FAN2_PIN PD12 // Fan2
-#define FAN3_PIN PD13 // Fan3
-#define FAN4_PIN PD14 // Fan4
-#define FAN5_PIN PD15 // Fan5
-
-//
-// SD Support
-//
-#ifndef SDCARD_CONNECTION
- #if HAS_WIRED_LCD
- #define SDCARD_CONNECTION LCD
- #else
- #define SDCARD_CONNECTION ONBOARD
- #endif
-#endif
-
-//
-// SPI pins for TMC2130 stepper drivers
-//
-#ifndef TMC_SPI_MOSI
- #define TMC_SPI_MOSI PA7
-#endif
-#ifndef TMC_SPI_MISO
- #define TMC_SPI_MISO PA6
-#endif
-#ifndef TMC_SPI_SCK
- #define TMC_SPI_SCK PA5
-#endif
-
-#if HAS_TMC_UART
- /**
- * TMC2208/TMC2209 stepper drivers
- *
- * Hardware serial communication ports.
- * If undefined software serial is used according to the pins below
- */
- //#define X_HARDWARE_SERIAL Serial1
- //#define X2_HARDWARE_SERIAL Serial1
- //#define Y_HARDWARE_SERIAL Serial1
- //#define Y2_HARDWARE_SERIAL Serial1
- //#define Z_HARDWARE_SERIAL Serial1
- //#define Z2_HARDWARE_SERIAL Serial1
- //#define E0_HARDWARE_SERIAL Serial1
- //#define E1_HARDWARE_SERIAL Serial1
- //#define E2_HARDWARE_SERIAL Serial1
- //#define E3_HARDWARE_SERIAL Serial1
- //#define E4_HARDWARE_SERIAL Serial1
-
- #define X_SERIAL_TX_PIN PC4
- #define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
-
- #define Y_SERIAL_TX_PIN PD11
- #define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
-
- #define Z_SERIAL_TX_PIN PC6
- #define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
-
- #define Z2_SERIAL_TX_PIN PC7
- #define Z2_SERIAL_RX_PIN Z2_SERIAL_TX_PIN
-
- #define E0_SERIAL_TX_PIN PF2
- #define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
-
- #define E1_SERIAL_TX_PIN PE4
- #define E1_SERIAL_RX_PIN E1_SERIAL_TX_PIN
-
- #define E2_SERIAL_TX_PIN PE1
- #define E2_SERIAL_RX_PIN E2_SERIAL_TX_PIN
-
- #define E3_SERIAL_TX_PIN PD3
- #define E3_SERIAL_RX_PIN E3_SERIAL_TX_PIN
-
- // Reduce baud rate to improve software serial reliability
- #ifndef TMC_BAUD_RATE
- #define TMC_BAUD_RATE 19200
- #endif
-
-#endif // HAS_TMC_UART
-
-/** ------ ------
- * (BEEPER) PE8 | 1 2 | PE7 (BTN_ENC) (MISO) PA6 | 1 2 | PA5 (SCK)
- * (LCD_EN) PE9 | 3 4 | PE10 (LCD_RS) (BTN_EN1) PB2 | 3 4 | PA4 (SD_SS)
- * (LCD_D4) PE12 5 6 | PE13 (LCD_D5) (BTN_EN2) PB1 5 6 | PA7 (MOSI)
- * (LCD_D6) PE14 | 7 8 | PE15 (LCD_D7) (SD_DETECT) PC15 | 7 8 | RESET
- * GND | 9 10 | 5V GND | 9 10 | --
- * ------ ------
- * EXP1 EXP2
- */
-#define EXP1_01_PIN PE8
-#define EXP1_02_PIN PE7
-#define EXP1_03_PIN PE9
-#define EXP1_04_PIN PE10
-#define EXP1_05_PIN PE12
-#define EXP1_06_PIN PE13
-#define EXP1_07_PIN PE14
-#define EXP1_08_PIN PE15
-
-#define EXP2_01_PIN PA6
-#define EXP2_02_PIN PA5
-#define EXP2_03_PIN PB1
-#define EXP2_04_PIN PA4
-#define EXP2_05_PIN PB2
-#define EXP2_06_PIN PA7
-#define EXP2_07_PIN PC15
-#define EXP2_08_PIN -1
-
-//
-// Onboard SD card
-// Must use soft SPI because Marlin's default hardware SPI is tied to LCD's EXP2
-//
-#if SD_CONNECTION_IS(ONBOARD)
- #define ONBOARD_SDIO // Use SDIO for onboard SD
- #ifndef SD_DETECT_STATE
- #define SD_DETECT_STATE HIGH
- #elif SD_DETECT_STATE == LOW
- #error "BOARD_BTT_OCTOPUS_V1_1 onboard SD requires SD_DETECT_STATE set to HIGH."
- #endif
- #define SD_DETECT_PIN PC14
-#elif SD_CONNECTION_IS(LCD)
-
- #define SDSS PA4
- #define SD_SS_PIN SDSS
- #define SD_SCK_PIN PA5
- #define SD_MISO_PIN PA6
- #define SD_MOSI_PIN PA7
- #define SD_DETECT_PIN PC15
-
-#elif SD_CONNECTION_IS(CUSTOM_CABLE)
- #error "CUSTOM_CABLE is not a supported SDCARD_CONNECTION for this board"
-#endif
-
-#if ENABLED(BTT_MOTOR_EXPANSION)
- /**
- * ------ ------
- * M3DIAG | 1 2 | M3RX M3STP | 1 2 | M3DIR
- * M2DIAG | 3 4 | M2RX M2STP | 3 4 | M2DIR
- * M1DIAG 5 6 | M1RX M1DIR 5 6 | M1STP
- * M3EN | 7 8 | M2EN M1EN | 7 8 | --
- * GND | 9 10 | -- GND | 9 10 | --
- * ------ ------
- * EXP1 EXP2
- */
-
- // M1 on Driver Expansion Module
- #define E4_STEP_PIN EXP2_06_PIN
- #define E4_DIR_PIN EXP2_05_PIN
- #define E4_ENABLE_PIN EXP2_07_PIN
- #define E4_DIAG_PIN EXP1_05_PIN
- #define E4_CS_PIN EXP1_06_PIN
- #if HAS_TMC_UART
- #define E4_SERIAL_TX_PIN EXP1_06_PIN
- #define E4_SERIAL_RX_PIN E4_SERIAL_TX_PIN
- #endif
-
- // M2 on Driver Expansion Module
- #define E5_STEP_PIN EXP2_03_PIN
- #define E5_DIR_PIN EXP2_04_PIN
- #define E5_ENABLE_PIN EXP1_08_PIN
- #define E5_DIAG_PIN EXP1_03_PIN
- #define E5_CS_PIN EXP1_04_PIN
- #if HAS_TMC_UART
- #define E5_SERIAL_TX_PIN EXP1_04_PIN
- #define E5_SERIAL_RX_PIN E5_SERIAL_TX_PIN
- #endif
-
- // M3 on Driver Expansion Module
- #define E6_STEP_PIN EXP2_01_PIN
- #define E6_DIR_PIN EXP2_02_PIN
- #define E6_ENABLE_PIN EXP1_07_PIN
- #define E6_DIAG_PIN EXP1_01_PIN
- #define E6_CS_PIN EXP1_02_PIN
- #if HAS_TMC_UART
- #define E6_SERIAL_TX_PIN EXP1_02_PIN
- #define E6_SERIAL_RX_PIN E6_SERIAL_TX_PIN
- #endif
-
-#endif // BTT_MOTOR_EXPANSION
-
-//
-// LCDs and Controllers
-//
-#if IS_TFTGLCD_PANEL
-
- #if ENABLED(TFTGLCD_PANEL_SPI)
- #define TFTGLCD_CS EXP2_03_PIN
- #endif
-
-#elif HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
- /**
- * ------ ------ ---
- * | 1 2 | | 1 2 | 1 |
- * | 3 4 | RX | 3 4 | TX | 2 | RX
- * ENT 5 6 | BEEP ENT 5 6 | BEEP | 3 | TX
- * B | 7 8 | A B | 7 8 | A | 4 |
- * GND | 9 10 | VCC GND | 9 10 | VCC 5 |
- * ------ ------ ---
- * EXP1 DWIN TFT
- *
- * DWIN pins are labeled as printed on DWIN PCB. GND, VCC, A, B, ENT & BEEP can be connected in the same
- * orientation as the existing plug/DWIN to EXP1. TX/RX need to be connected to the TFT port, with TX->RX, RX->TX.
- */
-
- #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
- #error "CAUTION! Ender-3 V2 display requires a custom cable. See 'pins_BTT_OCTOPUS_V1_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
- #endif
-
- #define BEEPER_PIN EXP1_06_PIN
- #define BTN_EN1 EXP1_08_PIN
- #define BTN_EN2 EXP1_07_PIN
- #define BTN_ENC EXP1_05_PIN
-
-#elif HAS_WIRED_LCD
-
- #define BEEPER_PIN EXP1_01_PIN
- #define BTN_ENC EXP1_02_PIN
-
- #if ENABLED(CR10_STOCKDISPLAY)
-
- #define LCD_PINS_RS EXP1_07_PIN
-
- #define BTN_EN1 EXP1_03_PIN
- #define BTN_EN2 EXP1_05_PIN
-
- #define LCD_PINS_EN EXP1_08_PIN
- #define LCD_PINS_D4 EXP1_06_PIN
-
- #else
-
- #define LCD_PINS_RS EXP1_04_PIN
-
- #define BTN_EN1 EXP2_03_PIN
- #define BTN_EN2 EXP2_05_PIN
-
- #define LCD_PINS_EN EXP1_03_PIN
- #define LCD_PINS_D4 EXP1_05_PIN
-
- #if ENABLED(FYSETC_MINI_12864)
- #define DOGLCD_CS EXP1_03_PIN
- #define DOGLCD_A0 EXP1_04_PIN
- //#define LCD_BACKLIGHT_PIN -1
- #define LCD_RESET_PIN EXP1_05_PIN // Must be high or open for LCD to operate normally.
- #if ANY(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
- #ifndef RGB_LED_R_PIN
- #define RGB_LED_R_PIN EXP1_06_PIN
- #endif
- #ifndef RGB_LED_G_PIN
- #define RGB_LED_G_PIN EXP1_07_PIN
- #endif
- #ifndef RGB_LED_B_PIN
- #define RGB_LED_B_PIN EXP1_08_PIN
- #endif
- #elif ENABLED(FYSETC_MINI_12864_2_1)
- #define NEOPIXEL_PIN EXP1_06_PIN
- #endif
- #endif // !FYSETC_MINI_12864
-
- #if IS_ULTIPANEL
- #define LCD_PINS_D5 EXP1_06_PIN
- #define LCD_PINS_D6 EXP1_07_PIN
- #define LCD_PINS_D7 EXP1_08_PIN
-
- #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
- #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
- #endif
-
- #endif
-
- #endif
-#endif // HAS_WIRED_LCD
-
-// Alter timing for graphical display
-#if IS_U8GLIB_ST7920
- #define BOARD_ST7920_DELAY_1 120
- #define BOARD_ST7920_DELAY_2 80
- #define BOARD_ST7920_DELAY_3 580
-#endif
-
-#if HAS_SPI_TFT
- #define TFT_CS_PIN EXP2_04_PIN
- #define TFT_A0_PIN EXP2_07_PIN
- #define TFT_SCK_PIN EXP2_02_PIN
- #define TFT_MISO_PIN EXP2_01_PIN
- #define TFT_MOSI_PIN EXP2_06_PIN
-
- #define TOUCH_INT_PIN EXP1_07_PIN
- #define TOUCH_MISO_PIN EXP1_06_PIN
- #define TOUCH_MOSI_PIN EXP1_03_PIN
- #define TOUCH_SCK_PIN EXP1_05_PIN
- #define TOUCH_CS_PIN EXP1_04_PIN
-
- #define BTN_EN1 EXP2_03_PIN
- #define BTN_EN2 EXP2_05_PIN
- #define BTN_ENC EXP1_02_PIN
-#endif
//
// NeoPixel LED
@@ -544,29 +42,3 @@
#ifndef NEOPIXEL_PIN
#define NEOPIXEL_PIN PB10
#endif
-
-#if ENABLED(WIFISUPPORT)
- //
- // WIFI
- //
-
- /**
- * -------
- * GND | 9 | | 8 | 3.3V
- * (ESP-CS) PB12 | 10 | | 7 | PB15 (ESP-MOSI)
- * 3.3V | 11 | | 6 | PB14 (ESP-MISO)
- * (ESP-IO0) PD7 | 12 | | 5 | PB13 (ESP-CLK)
- * (ESP-IO4) PD10 | 13 | | 4 | --
- * -- | 14 | | 3 | PE15 (ESP-EN)
- * (ESP-RX) PD8 | 15 | | 2 | --
- * (ESP-TX) PD9 | 16 | | 1 | PE14 (ESP-RST)
- * -------
- * WIFI
- */
- #define ESP_WIFI_MODULE_COM 3 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
- #define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
- #define ESP_WIFI_MODULE_RESET_PIN PG7
- #define ESP_WIFI_MODULE_ENABLE_PIN PG8
- #define ESP_WIFI_MODULE_GPIO0_PIN PD7
- #define ESP_WIFI_MODULE_GPIO4_PIN PD10
-#endif
diff --git a/Marlin/src/pins/stm32h7/pins_BTT_OCTOPUS_PRO_V1_common.h b/Marlin/src/pins/stm32h7/pins_BTT_OCTOPUS_PRO_V1_common.h
new file mode 100644
index 0000000000..fe787ea592
--- /dev/null
+++ b/Marlin/src/pins/stm32h7/pins_BTT_OCTOPUS_PRO_V1_common.h
@@ -0,0 +1,560 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+#include "env_validate.h"
+
+#define HAS_OTG_USB_HOST_SUPPORT // USB Flash Drive support
+#define USES_DIAG_JUMPERS
+
+// Onboard I2C EEPROM
+#if ANY(NO_EEPROM_SELECTED, I2C_EEPROM)
+ #undef NO_EEPROM_SELECTED
+ #define I2C_EEPROM
+ #define MARLIN_EEPROM_SIZE 0x1000 // 4K (AT24C32)
+ #define SOFT_I2C_EEPROM // Force the use of Software I2C
+ #define I2C_SCL_PIN PB8
+ #define I2C_SDA_PIN PB9
+#endif
+
+// Avoid conflict with TIMER_TONE
+#define STEP_TIMER 8
+
+//
+// Servos
+//
+#define SERVO0_PIN PB6
+
+//
+// Trinamic Stallguard pins
+//
+#define X_DIAG_PIN PG6 // X-STOP
+#define Y_DIAG_PIN PG9 // Y-STOP
+#define Z_DIAG_PIN PG10 // Z-STOP
+#define Z2_DIAG_PIN PG11 // Z2-STOP
+#define E0_DIAG_PIN PG12 // E0DET
+#define E1_DIAG_PIN PG13 // E1DET
+#define E2_DIAG_PIN PG14 // E2DET
+#define E3_DIAG_PIN PG15 // E3DET
+
+//
+// Limit Switches
+//
+#ifdef X_STALL_SENSITIVITY
+ #define X_STOP_PIN X_DIAG_PIN
+ #if X_HOME_TO_MIN
+ #define X_MAX_PIN E0_DIAG_PIN // E0DET
+ #else
+ #define X_MIN_PIN E0_DIAG_PIN // E0DET
+ #endif
+#elif NEEDS_X_MINMAX
+ #ifndef X_MIN_PIN
+ #define X_MIN_PIN X_DIAG_PIN // X-STOP
+ #endif
+ #ifndef X_MAX_PIN
+ #define X_MAX_PIN E0_DIAG_PIN // E0DET
+ #endif
+#else
+ #define X_STOP_PIN X_DIAG_PIN // X-STOP
+#endif
+
+#ifdef Y_STALL_SENSITIVITY
+ #define Y_STOP_PIN Y_DIAG_PIN
+ #if Y_HOME_TO_MIN
+ #define Y_MAX_PIN E1_DIAG_PIN // E1DET
+ #else
+ #define Y_MIN_PIN E1_DIAG_PIN // E1DET
+ #endif
+#elif NEEDS_Y_MINMAX
+ #ifndef Y_MIN_PIN
+ #define Y_MIN_PIN Y_DIAG_PIN // Y-STOP
+ #endif
+ #ifndef Y_MAX_PIN
+ #define Y_MAX_PIN E1_DIAG_PIN // E1DET
+ #endif
+#else
+ #define Y_STOP_PIN Y_DIAG_PIN // Y-STOP
+#endif
+
+#ifdef Z_STALL_SENSITIVITY
+ #define Z_STOP_PIN Z_DIAG_PIN
+ #if Z_HOME_TO_MIN
+ #define Z_MAX_PIN E2_DIAG_PIN // PWRDET
+ #else
+ #define Z_MIN_PIN E2_DIAG_PIN // PWRDET
+ #endif
+#elif NEEDS_Z_MINMAX
+ #ifndef Z_MIN_PIN
+ #define Z_MIN_PIN Z_DIAG_PIN // Z-STOP
+ #endif
+ #ifndef Z_MAX_PIN
+ #define Z_MAX_PIN E2_DIAG_PIN // PWRDET
+ #endif
+#else
+ #define Z_STOP_PIN Z_DIAG_PIN // Z-STOP
+#endif
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+ #if DISABLED(BLTOUCH)
+ #define Z_MIN_PROBE_PIN PC5 // Probe (Proximity switch) port
+ #else
+ #define Z_MIN_PROBE_PIN PB7
+ #endif
+#endif
+
+//
+// Filament Runout Sensor
+//
+#define FIL_RUNOUT_PIN PG12 // E0DET
+#define FIL_RUNOUT2_PIN PG13 // E1DET
+#define FIL_RUNOUT3_PIN PG14 // E2DET
+#define FIL_RUNOUT4_PIN PG15 // E3DET
+
+//
+// Power Supply Control
+//
+#ifndef PS_ON_PIN
+ #define PS_ON_PIN PE11 // PS-ON
+#endif
+
+//
+// Power Loss Detection
+//
+#ifndef POWER_LOSS_PIN
+ #define POWER_LOSS_PIN PC0 // PWRDET
+#endif
+
+//
+// Misc. Functions
+//
+#define LED_PIN PA13
+
+//
+// Steppers
+//
+#define X_STEP_PIN PF13 // MOTOR 0
+#define X_DIR_PIN PF12
+#define X_ENABLE_PIN PF14
+#ifndef X_CS_PIN
+ #define X_CS_PIN PC4
+#endif
+
+#define Y_STEP_PIN PG0 // MOTOR 1
+#define Y_DIR_PIN PG1
+#define Y_ENABLE_PIN PF15
+#ifndef Y_CS_PIN
+ #define Y_CS_PIN PD11
+#endif
+
+#define Z_STEP_PIN PF11 // MOTOR 2
+#define Z_DIR_PIN PG3
+#define Z_ENABLE_PIN PG5
+#ifndef Z_CS_PIN
+ #define Z_CS_PIN PC6
+#endif
+
+#define Z2_STEP_PIN PG4 // MOTOR 3
+#define Z2_DIR_PIN PC1
+#ifndef Z2_CS_PIN
+ #define Z2_CS_PIN PC7
+#endif
+
+#define E0_STEP_PIN PF9 // MOTOR 4
+#define E0_DIR_PIN PF10
+#define E0_ENABLE_PIN PG2
+#ifndef E0_CS_PIN
+ #define E0_CS_PIN PF2
+#endif
+
+#define E1_STEP_PIN PC13 // MOTOR 5
+#define E1_DIR_PIN PF0
+#define E1_ENABLE_PIN PF1
+#ifndef E1_CS_PIN
+ #define E1_CS_PIN PE4
+#endif
+
+#define E2_STEP_PIN PE2 // MOTOR 6
+#define E2_DIR_PIN PE3
+#define E2_ENABLE_PIN PD4
+#ifndef E2_CS_PIN
+
+ #define E2_CS_PIN PE1
+#endif
+
+#define E3_STEP_PIN PE6 // MOTOR 7
+#define E3_DIR_PIN PA14
+#define E3_ENABLE_PIN PE0
+#ifndef E3_CS_PIN
+ #define E3_CS_PIN PD3
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_BED_PIN PF3 // TB
+#define TEMP_1_PIN PF5 // TH1
+#define TEMP_2_PIN PF6 // TH2
+#define TEMP_3_PIN PF7 // TH3
+
+#if TEMP_SENSOR_0 == -5
+ #define TEMP_0_CS_PIN PF8 // Max31865 CS
+ #define TEMP_0_SCK_PIN PA5
+ #define TEMP_0_MISO_PIN PA6
+ #define TEMP_0_MOSI_PIN PA7
+ #define SOFTWARE_SPI // Max31865 and LCD SD share a set of SPIs, Set SD to softwareSPI for Max31865
+ #define FORCE_SOFT_SPI
+#else
+ #define TEMP_0_PIN PF4 // TH0
+#endif
+
+//
+// Heaters / Fans
+//
+#define HEATER_BED_PIN PA1 // Hotbed
+#define HEATER_1_PIN PA3 // Heater1
+#define HEATER_3_PIN PB11 // Heater3
+
+#define FAN0_PIN PA8 // Fan0
+#define FAN1_PIN PE5 // Fan1
+#define FAN2_PIN PD12 // Fan2
+#define FAN3_PIN PD13 // Fan3
+#define FAN4_PIN PD14 // Fan4
+#define FAN5_PIN PD15 // Fan5
+
+//
+// SD Support
+//
+#ifndef SDCARD_CONNECTION
+ #if HAS_WIRED_LCD
+ #define SDCARD_CONNECTION LCD
+ #else
+ #define SDCARD_CONNECTION ONBOARD
+ #endif
+#endif
+
+//
+// SPI pins for TMC2130 stepper drivers
+//
+#ifndef TMC_SPI_MOSI
+ #define TMC_SPI_MOSI PA7
+#endif
+#ifndef TMC_SPI_MISO
+ #define TMC_SPI_MISO PA6
+#endif
+#ifndef TMC_SPI_SCK
+ #define TMC_SPI_SCK PA5
+#endif
+
+#if HAS_TMC_UART
+ /**
+ * TMC2208/TMC2209 stepper drivers
+ *
+ * Hardware serial communication ports.
+ * If undefined software serial is used according to the pins below
+ */
+ //#define X_HARDWARE_SERIAL Serial1
+ //#define X2_HARDWARE_SERIAL Serial1
+ //#define Y_HARDWARE_SERIAL Serial1
+ //#define Y2_HARDWARE_SERIAL Serial1
+ //#define Z_HARDWARE_SERIAL Serial1
+ //#define Z2_HARDWARE_SERIAL Serial1
+ //#define E0_HARDWARE_SERIAL Serial1
+ //#define E1_HARDWARE_SERIAL Serial1
+ //#define E2_HARDWARE_SERIAL Serial1
+ //#define E3_HARDWARE_SERIAL Serial1
+ //#define E4_HARDWARE_SERIAL Serial1
+
+ #define X_SERIAL_TX_PIN PC4
+ #define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
+
+ #define Y_SERIAL_TX_PIN PD11
+ #define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
+
+ #define Z_SERIAL_TX_PIN PC6
+ #define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
+
+ #define Z2_SERIAL_TX_PIN PC7
+ #define Z2_SERIAL_RX_PIN Z2_SERIAL_TX_PIN
+
+ #define E0_SERIAL_TX_PIN PF2
+ #define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
+
+ #define E1_SERIAL_TX_PIN PE4
+ #define E1_SERIAL_RX_PIN E1_SERIAL_TX_PIN
+
+ #define E2_SERIAL_TX_PIN PE1
+ #define E2_SERIAL_RX_PIN E2_SERIAL_TX_PIN
+
+ #define E3_SERIAL_TX_PIN PD3
+ #define E3_SERIAL_RX_PIN E3_SERIAL_TX_PIN
+
+ // Reduce baud rate to improve software serial reliability
+ #ifndef TMC_BAUD_RATE
+ #define TMC_BAUD_RATE 19200
+ #endif
+
+#endif // HAS_TMC_UART
+
+/** ------ ------
+ * (BEEPER) PE8 | 1 2 | PE7 (BTN_ENC) (MISO) PA6 | 1 2 | PA5 (SCK)
+ * (LCD_EN) PE9 | 3 4 | PE10 (LCD_RS) (BTN_EN1) PB2 | 3 4 | PA4 (SD_SS)
+ * (LCD_D4) PE12 5 6 | PE13 (LCD_D5) (BTN_EN2) PB1 5 6 | PA7 (MOSI)
+ * (LCD_D6) PE14 | 7 8 | PE15 (LCD_D7) (SD_DETECT) PC15 | 7 8 | RESET
+ * GND | 9 10 | 5V GND | 9 10 | --
+ * ------ ------
+ * EXP1 EXP2
+ */
+#define EXP1_01_PIN PE8
+#define EXP1_02_PIN PE7
+#define EXP1_03_PIN PE9
+#define EXP1_04_PIN PE10
+#define EXP1_05_PIN PE12
+#define EXP1_06_PIN PE13
+#define EXP1_07_PIN PE14
+#define EXP1_08_PIN PE15
+
+#define EXP2_01_PIN PA6
+#define EXP2_02_PIN PA5
+#define EXP2_03_PIN PB1
+#define EXP2_04_PIN PA4
+#define EXP2_05_PIN PB2
+#define EXP2_06_PIN PA7
+#define EXP2_07_PIN PC15
+#define EXP2_08_PIN -1
+
+//
+// Onboard SD card
+// Must use soft SPI because Marlin's default hardware SPI is tied to LCD's EXP2
+//
+#if SD_CONNECTION_IS(ONBOARD)
+ #define ONBOARD_SDIO // Use SDIO for onboard SD
+ #ifndef SD_DETECT_STATE
+ #define SD_DETECT_STATE HIGH
+ #elif SD_DETECT_STATE == LOW
+ #error "BOARD_BTT_OCTOPUS_V1_1 onboard SD requires SD_DETECT_STATE set to HIGH."
+ #endif
+ #define SD_DETECT_PIN PC14
+#elif SD_CONNECTION_IS(LCD)
+
+ #define SDSS PA4
+ #define SD_SS_PIN SDSS
+ #define SD_SCK_PIN PA5
+ #define SD_MISO_PIN PA6
+ #define SD_MOSI_PIN PA7
+ #define SD_DETECT_PIN PC15
+
+#elif SD_CONNECTION_IS(CUSTOM_CABLE)
+ #error "CUSTOM_CABLE is not a supported SDCARD_CONNECTION for this board"
+#endif
+
+#if ENABLED(BTT_MOTOR_EXPANSION)
+ /**
+ * ------ ------
+ * M3DIAG | 1 2 | M3RX M3STP | 1 2 | M3DIR
+ * M2DIAG | 3 4 | M2RX M2STP | 3 4 | M2DIR
+ * M1DIAG 5 6 | M1RX M1DIR 5 6 | M1STP
+ * M3EN | 7 8 | M2EN M1EN | 7 8 | --
+ * GND | 9 10 | -- GND | 9 10 | --
+ * ------ ------
+ * EXP1 EXP2
+ */
+
+ // M1 on Driver Expansion Module
+ #define E4_STEP_PIN EXP2_06_PIN
+ #define E4_DIR_PIN EXP2_05_PIN
+ #define E4_ENABLE_PIN EXP2_07_PIN
+ #define E4_DIAG_PIN EXP1_05_PIN
+ #define E4_CS_PIN EXP1_06_PIN
+ #if HAS_TMC_UART
+ #define E4_SERIAL_TX_PIN EXP1_06_PIN
+ #define E4_SERIAL_RX_PIN E4_SERIAL_TX_PIN
+ #endif
+
+ // M2 on Driver Expansion Module
+ #define E5_STEP_PIN EXP2_03_PIN
+ #define E5_DIR_PIN EXP2_04_PIN
+ #define E5_ENABLE_PIN EXP1_08_PIN
+ #define E5_DIAG_PIN EXP1_03_PIN
+ #define E5_CS_PIN EXP1_04_PIN
+ #if HAS_TMC_UART
+ #define E5_SERIAL_TX_PIN EXP1_04_PIN
+ #define E5_SERIAL_RX_PIN E5_SERIAL_TX_PIN
+ #endif
+
+ // M3 on Driver Expansion Module
+ #define E6_STEP_PIN EXP2_01_PIN
+ #define E6_DIR_PIN EXP2_02_PIN
+ #define E6_ENABLE_PIN EXP1_07_PIN
+ #define E6_DIAG_PIN EXP1_01_PIN
+ #define E6_CS_PIN EXP1_02_PIN
+ #if HAS_TMC_UART
+ #define E6_SERIAL_TX_PIN EXP1_02_PIN
+ #define E6_SERIAL_RX_PIN E6_SERIAL_TX_PIN
+ #endif
+
+#endif // BTT_MOTOR_EXPANSION
+
+//
+// LCDs and Controllers
+//
+#if IS_TFTGLCD_PANEL
+
+ #if ENABLED(TFTGLCD_PANEL_SPI)
+ #define TFTGLCD_CS EXP2_03_PIN
+ #endif
+
+#elif HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
+ /**
+ * ------ ------ ---
+ * | 1 2 | | 1 2 | 1 |
+ * | 3 4 | RX | 3 4 | TX | 2 | RX
+ * ENT 5 6 | BEEP ENT 5 6 | BEEP | 3 | TX
+ * B | 7 8 | A B | 7 8 | A | 4 |
+ * GND | 9 10 | VCC GND | 9 10 | VCC 5 |
+ * ------ ------ ---
+ * EXP1 DWIN TFT
+ *
+ * DWIN pins are labeled as printed on DWIN PCB. GND, VCC, A, B, ENT & BEEP can be connected in the same
+ * orientation as the existing plug/DWIN to EXP1. TX/RX need to be connected to the TFT port, with TX->RX, RX->TX.
+ */
+
+ #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
+ #error "CAUTION! Ender-3 V2 display requires a custom cable. See 'pins_BTT_OCTOPUS_V1_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
+ #endif
+
+ #define BEEPER_PIN EXP1_06_PIN
+ #define BTN_EN1 EXP1_08_PIN
+ #define BTN_EN2 EXP1_07_PIN
+ #define BTN_ENC EXP1_05_PIN
+
+#elif HAS_WIRED_LCD
+
+ #define BEEPER_PIN EXP1_01_PIN
+ #define BTN_ENC EXP1_02_PIN
+
+ #if ENABLED(CR10_STOCKDISPLAY)
+
+ #define LCD_PINS_RS EXP1_07_PIN
+
+ #define BTN_EN1 EXP1_03_PIN
+ #define BTN_EN2 EXP1_05_PIN
+
+ #define LCD_PINS_EN EXP1_08_PIN
+ #define LCD_PINS_D4 EXP1_06_PIN
+
+ #else
+
+ #define LCD_PINS_RS EXP1_04_PIN
+
+ #define BTN_EN1 EXP2_03_PIN
+ #define BTN_EN2 EXP2_05_PIN
+
+ #define LCD_PINS_EN EXP1_03_PIN
+ #define LCD_PINS_D4 EXP1_05_PIN
+
+ #if ENABLED(FYSETC_MINI_12864)
+ #define DOGLCD_CS EXP1_03_PIN
+ #define DOGLCD_A0 EXP1_04_PIN
+ //#define LCD_BACKLIGHT_PIN -1
+ #define LCD_RESET_PIN EXP1_05_PIN // Must be high or open for LCD to operate normally.
+ #if ANY(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
+ #ifndef RGB_LED_R_PIN
+ #define RGB_LED_R_PIN EXP1_06_PIN
+ #endif
+ #ifndef RGB_LED_G_PIN
+ #define RGB_LED_G_PIN EXP1_07_PIN
+ #endif
+ #ifndef RGB_LED_B_PIN
+ #define RGB_LED_B_PIN EXP1_08_PIN
+ #endif
+ #elif ENABLED(FYSETC_MINI_12864_2_1)
+ #define NEOPIXEL_PIN EXP1_06_PIN
+ #endif
+ #endif // !FYSETC_MINI_12864
+
+ #if IS_ULTIPANEL
+ #define LCD_PINS_D5 EXP1_06_PIN
+ #define LCD_PINS_D6 EXP1_07_PIN
+ #define LCD_PINS_D7 EXP1_08_PIN
+
+ #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
+ #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
+ #endif
+
+ #endif
+
+ #endif
+#endif // HAS_WIRED_LCD
+
+// Alter timing for graphical display
+#if IS_U8GLIB_ST7920
+ #define BOARD_ST7920_DELAY_1 120
+ #define BOARD_ST7920_DELAY_2 80
+ #define BOARD_ST7920_DELAY_3 580
+#endif
+
+#if HAS_SPI_TFT
+ #define TFT_CS_PIN EXP2_04_PIN
+ #define TFT_A0_PIN EXP2_07_PIN
+ #define TFT_SCK_PIN EXP2_02_PIN
+ #define TFT_MISO_PIN EXP2_01_PIN
+ #define TFT_MOSI_PIN EXP2_06_PIN
+
+ #define TOUCH_INT_PIN EXP1_07_PIN
+ #define TOUCH_MISO_PIN EXP1_06_PIN
+ #define TOUCH_MOSI_PIN EXP1_03_PIN
+ #define TOUCH_SCK_PIN EXP1_05_PIN
+ #define TOUCH_CS_PIN EXP1_04_PIN
+
+ #define BTN_EN1 EXP2_03_PIN
+ #define BTN_EN2 EXP2_05_PIN
+ #define BTN_ENC EXP1_02_PIN
+#endif
+
+#if ENABLED(WIFISUPPORT)
+ //
+ // WIFI
+ //
+
+ /**
+ * -------
+ * GND | 9 | | 8 | 3.3V
+ * (ESP-CS) PB12 | 10 | | 7 | PB15 (ESP-MOSI)
+ * 3.3V | 11 | | 6 | PB14 (ESP-MISO)
+ * (ESP-IO0) PD7 | 12 | | 5 | PB13 (ESP-CLK)
+ * (ESP-IO4) PD10 | 13 | | 4 | --
+ * -- | 14 | | 3 | PE15 (ESP-EN)
+ * (ESP-RX) PD8 | 15 | | 2 | --
+ * (ESP-TX) PD9 | 16 | | 1 | PE14 (ESP-RST)
+ * -------
+ * WIFI
+ */
+ #define ESP_WIFI_MODULE_COM 3 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
+ #define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
+ #define ESP_WIFI_MODULE_RESET_PIN PG7
+ #define ESP_WIFI_MODULE_ENABLE_PIN PG8
+ #define ESP_WIFI_MODULE_GPIO0_PIN PD7
+ #define ESP_WIFI_MODULE_GPIO4_PIN PD10
+#endif
diff --git a/ini/stm32h7.ini b/ini/stm32h7.ini
index a28ec11e92..cdc2a29c80 100644
--- a/ini/stm32h7.ini
+++ b/ini/stm32h7.ini
@@ -125,7 +125,7 @@ upload_protocol = cmsis-dap
debug_tool = cmsis-dap
#
-# BigTreeTech Octopus Pro V1.1 / Octopus Max EZ V1.0 (STM32H723ZET6 ARM Cortex-M7)
+# BigTreeTech Octopus Pro V1.0.1/1.1 / Octopus Max EZ V1.0 (STM32H723ZET6 ARM Cortex-M7)
#
[env:STM32H723ZE_btt]
extends = STM32H723Zx_btt