diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 806550b4e5..0d675e2e00 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -679,6 +679,7 @@
* A (A shifted) B (B shifted) IC
* Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451
* AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451
+ * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451
* AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451
* MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018
*/
diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h
index cfebabe1bd..ee9da1fd16 100644
--- a/Marlin/src/core/boards.h
+++ b/Marlin/src/core/boards.h
@@ -189,10 +189,11 @@
#define BOARD_COHESION3D_REMIX 1755 // Cohesion3D ReMix
#define BOARD_COHESION3D_MINI 1756 // Cohesion3D Mini
#define BOARD_SMOOTHIEBOARD 1757 // Smoothieboard
-#define BOARD_AZTEEG_X5_MINI_WIFI 1758 // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan)
+#define BOARD_AZTEEG_X5_MINI_WIFI 1758 // Azteeg X5 Mini Wifi (Power outputs: Hotend0, Bed, Fan)
#define BOARD_BIQU_SKR_V1_1 1759 // BIQU SKR_V1.1 (Power outputs: Hotend0,Hotend1, Fan, Bed)
#define BOARD_BIQU_B300_V1_0 1760 // BIQU B300_V1.0 (Power outputs: Hotend0, Fan, Bed, SPI Driver)
#define BOARD_BIGTREE_SKR_V1_3 1761 // BIGTREE SKR_V1.3 (Power outputs: Hotend0, Hotend1, Fan, Bed)
+#define BOARD_AZTEEG_X5_MINI 1762 // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan)
//
// SAM3X8E ARM Cortex M3
diff --git a/Marlin/src/feature/digipot/digipot_mcp4451.cpp b/Marlin/src/feature/digipot/digipot_mcp4451.cpp
index 6e02a1607c..bc43304055 100644
--- a/Marlin/src/feature/digipot/digipot_mcp4451.cpp
+++ b/Marlin/src/feature/digipot/digipot_mcp4451.cpp
@@ -35,6 +35,9 @@
#if MB(5DPRINT)
#define DIGIPOT_I2C_FACTOR 117.96
#define DIGIPOT_I2C_MAX_CURRENT 1.736
+#elif MB(AZTEEG_X5_MINI) || MB(AZTEEG_X5_MINI_WIFI)
+ #define DIGIPOT_I2C_FACTOR 113.5
+ #define DIGIPOT_I2C_MAX_CURRENT 2.0
#else
#define DIGIPOT_I2C_FACTOR 106.7
#define DIGIPOT_I2C_MAX_CURRENT 2.5
diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h
index c3ece1346f..68de292c0c 100644
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@@ -305,39 +305,41 @@
//
#elif MB(RAMPS_14_RE_ARM_EFB)
- #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768
+ #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768
#elif MB(RAMPS_14_RE_ARM_EEB)
- #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768
+ #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768
#elif MB(RAMPS_14_RE_ARM_EFF)
- #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768
+ #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768
#elif MB(RAMPS_14_RE_ARM_EEF)
- #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768
+ #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768
#elif MB(RAMPS_14_RE_ARM_SF)
- #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768
+ #include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768
#elif MB(MKS_SBASE)
- #include "pins_MKS_SBASE.h" // LPC1768 env:LPC1768
+ #include "pins_MKS_SBASE.h" // LPC1768 env:LPC1768
#elif MB(AZSMZ_MINI)
- #include "pins_AZSMZ_MINI.h" // LPC1768 env:LPC1768
+ #include "pins_AZSMZ_MINI.h" // LPC1768 env:LPC1768
#elif MB(AZTEEG_X5_GT)
- #include "pins_AZTEEG_X5_GT.h" // LPC1769 env:LPC1769
+ #include "pins_AZTEEG_X5_GT.h" // LPC1769 env:LPC1769
+#elif MB(AZTEEG_X5_MINI)
+ #include "pins_AZTEEG_X5_MINI.h" // LPC1769 env:LPC1769
#elif MB(AZTEEG_X5_MINI_WIFI)
- #include "pins_AZTEEG_X5_MINI_WIFI.h" // LPC1769 env:LPC1769
+ #include "pins_AZTEEG_X5_MINI_WIFI.h" // LPC1769 env:LPC1769
#elif MB(BIQU_BQ111_A4)
- #include "pins_BIQU_BQ111_A4.h" // LPC1768 env:LPC1768
+ #include "pins_BIQU_BQ111_A4.h" // LPC1768 env:LPC1768
#elif MB(SELENA_COMPACT)
- #include "pins_SELENA_COMPACT.h" // LPC1768 env:LPC1768
+ #include "pins_SELENA_COMPACT.h" // LPC1768 env:LPC1768
#elif MB(COHESION3D_REMIX)
- #include "pins_COHESION3D_REMIX.h" // LPC1769 env:LPC1769
+ #include "pins_COHESION3D_REMIX.h" // LPC1769 env:LPC1769
#elif MB(COHESION3D_MINI)
- #include "pins_COHESION3D_MINI.h" // LPC1769 env:LPC1769
+ #include "pins_COHESION3D_MINI.h" // LPC1769 env:LPC1769
#elif MB(SMOOTHIEBOARD)
- #include "pins_SMOOTHIEBOARD.h" // LPC1769 env:LPC1769
+ #include "pins_SMOOTHIEBOARD.h" // LPC1769 env:LPC1769
#elif MB(BIQU_SKR_V1_1)
- #include "pins_BIQU_SKR_V1.1.h" // LPC1768 env:LPC1768
+ #include "pins_BIQU_SKR_V1.1.h" // LPC1768 env:LPC1768
#elif MB(BIQU_B300_V1_0)
- #include "pins_BIQU_B300_V1.0.h" // LPC1768 env:LPC1768
+ #include "pins_BIQU_B300_V1.0.h" // LPC1768 env:LPC1768
#elif MB(BIGTREE_SKR_V1_3)
- #include "pins_BIGTREE_SKR_V1.3.h" // LPC1768 env:LPC1768
+ #include "pins_BIGTREE_SKR_V1.3.h" // LPC1768 env:LPC1768
//
// Other 32-bit Boards
diff --git a/Marlin/src/pins/pins_5DPRINT.h b/Marlin/src/pins/pins_5DPRINT.h
index f8184f567e..9eb36ba621 100755
--- a/Marlin/src/pins/pins_5DPRINT.h
+++ b/Marlin/src/pins/pins_5DPRINT.h
@@ -142,4 +142,6 @@
#define SDSS 20 // B0
//DIGIPOTS slave addresses
-#define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for DIGIPOT 0x2C (0x58 <- 0x2C << 1)
+#ifndef DIGIPOT_I2C_ADDRESS_A
+ #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for DIGIPOT 0x2C (0x58 <- 0x2C << 1)
+#endif
diff --git a/Marlin/src/pins/pins_AZTEEG_X3_PRO.h b/Marlin/src/pins/pins_AZTEEG_X3_PRO.h
index 6f60740864..55ee39f84f 100644
--- a/Marlin/src/pins/pins_AZTEEG_X3_PRO.h
+++ b/Marlin/src/pins/pins_AZTEEG_X3_PRO.h
@@ -48,8 +48,12 @@
#include "pins_RAMPS.h"
// DIGIPOT slave addresses
-#define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1)
-#define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1)
+#ifndef DIGIPOT_I2C_ADDRESS_A
+ #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1)
+#endif
+#ifndef DIGIPOT_I2C_ADDRESS_B
+ #define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1)
+#endif
//
// Servos
diff --git a/Marlin/src/pins/pins_AZTEEG_X5_MINI.h b/Marlin/src/pins/pins_AZTEEG_X5_MINI.h
new file mode 100644
index 0000000000..c73f62fa99
--- /dev/null
+++ b/Marlin/src/pins/pins_AZTEEG_X5_MINI.h
@@ -0,0 +1,218 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Azteeg X5 MINI pin assignments
+ */
+
+#ifndef LPC1769
+ #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
+#endif
+
+#ifndef BOARD_NAME
+ #define BOARD_NAME "Azteeg X5 MINI WIFI"
+#endif
+#define BOARD_WEBSITE_URL "http://www.panucatt.com/azteeg_X5_mini_reprap_3d_printer_controller_p/ax5mini.htm"
+
+//
+// LED
+//
+#define LED_PIN P1_18
+
+//
+// Servos
+//
+#define SERVO0_PIN P1_29
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN P1_24
+#define Y_STOP_PIN P1_26
+#define Z_STOP_PIN P1_28
+
+#ifndef FILWIDTH_PIN
+ #define FILWIDTH_PIN P2_04
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN P2_01
+#define X_DIR_PIN P0_11
+#define X_ENABLE_PIN P0_10
+
+#define Y_STEP_PIN P2_02
+#define Y_DIR_PIN P0_20
+#define Y_ENABLE_PIN P0_19
+
+#define Z_STEP_PIN P2_03
+#define Z_DIR_PIN P0_22
+#define Z_ENABLE_PIN P0_21
+
+#define E0_STEP_PIN P2_00
+#define E0_DIR_PIN P0_05
+#define E0_ENABLE_PIN P0_04
+
+//
+// DIGIPOT slave addresses
+//
+#ifndef DIGIPOT_I2C_ADDRESS_A
+ #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT
+#endif
+
+#ifndef DIGIPOT_I2C_ADDRESS_B
+ #define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT
+#endif
+
+//
+// Temperature Sensors
+// 3.3V max when defined as an analog input
+//
+#define TEMP_BED_PIN 0 // A0 (TH1)
+#define TEMP_0_PIN 1 // A1 (TH2)
+
+//
+// Heaters / Fans
+//
+#define HEATER_BED_PIN P2_07
+#define HEATER_0_PIN P2_05
+#ifndef FAN_PIN
+ #define FAN_PIN P0_26
+#endif
+#define FAN1_PIN P1_25
+
+//
+// Display
+//
+#if ENABLED(ULTRA_LCD)
+
+ #if ENABLED(CR10_STOCKDISPLAY)
+
+ // Re-Arm can support Creality stock display without SD card reader and single cable on EXP3.
+ // Re-Arm J3 pins 1 (p1.31) & 2 (P3.26) are not used. Stock cable will need to have one
+ // 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3.
+ // Requires REVERSE_ENCODER_DIRECTION in Configuration.h
+
+ #define BEEPER_PIN P2_11 // J3-3 & AUX-4
+
+ #define BTN_EN1 P0_16 // J3-7 & AUX-4
+ #define BTN_EN2 P1_23 // J3-5 & AUX-4
+ #define BTN_ENC P3_25 // J3-4 & AUX-4
+
+ #define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS)
+ #define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI)
+ #define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK)
+
+ #else
+
+ #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
+ #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
+ #define BTN_ENC P2_11 // (35) J3-3 & AUX-4
+
+ #define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
+ #define KILL_PIN P1_22 // (41) J5-4 & AUX-4
+ #define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4
+ #define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
+ #define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
+ #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
+ #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
+
+ #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
+
+ #if ENABLED(REPRAPWORLD_KEYPAD)
+ #define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3
+ #define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3
+ #define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3
+ #elif DISABLED(NEWPANEL)
+ //#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
+ //#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
+ //#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
+ //#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4
+ #endif
+
+ #if ANY(VIKI2, miniVIKI)
+ //#define LCD_SCREEN_ROT_180
+
+ #define BEEPER_PIN P1_30 // (37) may change if cable changes
+ #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
+ #define DOGLCD_SCK SCK_PIN
+ #define DOGLCD_MOSI MOSI_PIN
+
+ #define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
+ #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
+ #else
+ #if ENABLED(ULTIPANEL)
+ #define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
+ #define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
+ #define LCD_PINS_D7 P1_10 // (75) ENET_RXD1
+ #endif
+ #define BEEPER_PIN P1_30 // (37) not 5V tolerant
+ #define DOGLCD_CS P0_16 // (16)
+ #endif
+
+ #if ENABLED(MINIPANEL)
+ // GLCD features
+ // Uncomment screen orientation
+ //#define LCD_SCREEN_ROT_90
+ //#define LCD_SCREEN_ROT_180
+ //#define LCD_SCREEN_ROT_270
+ #endif
+
+ #endif
+
+#endif // ULTRA_LCD
+
+//
+// SD Support
+//
+//#define USB_SD_DISABLED // Disable host access to SD card as mass storage device through USB
+//#define USB_SD_ONBOARD // Enable host access to SD card as mass storage device through USB
+
+//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD
+#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board. There is no SD detect pin
+ // for the onboard card. Init card from LCD menu or send M21 whenever printer
+ // is powered on to enable SD access.
+
+#if ENABLED(LPC_SD_LCD)
+
+ #define SCK_PIN P0_15
+ #define MISO_PIN P0_17
+ #define MOSI_PIN P0_18
+ #define SS_PIN P1_23 // Chip select for SD card used by Marlin
+ #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
+
+#elif ENABLED(LPC_SD_ONBOARD)
+
+ #if ENABLED(USB_SD_ONBOARD)
+ // When sharing the SD card with a PC we want the menu options to
+ // mount/unmount the card and refresh it. So we disable card detect.
+ #define SHARED_SD_CARD
+ #undef SD_DETECT_PIN // there is also no detect pin for the onboard card
+ #endif
+ #define SCK_PIN P0_07
+ #define MISO_PIN P0_08
+ #define MOSI_PIN P0_09
+ #define SS_PIN P0_06 // Chip select for SD card used by Marlin
+ #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
+
+#endif
diff --git a/Marlin/src/pins/pins_AZTEEG_X5_MINI_WIFI.h b/Marlin/src/pins/pins_AZTEEG_X5_MINI_WIFI.h
index b71cf0e530..760e0d76de 100644
--- a/Marlin/src/pins/pins_AZTEEG_X5_MINI_WIFI.h
+++ b/Marlin/src/pins/pins_AZTEEG_X5_MINI_WIFI.h
@@ -29,183 +29,15 @@
#endif
#define BOARD_NAME "Azteeg X5 MINI WIFI"
-#define BOARD_WEBSITE_URL "http://www.panucatt.com/azteeg_X5_mini_reprap_3d_printer_controller_p/ax5mini.htm"
-
-//
-// LED
-//
-#define LED_PIN P1_18
-
-//
-// Servos
-//
-#define SERVO0_PIN P1_29
-
-//
-// Limit Switches
-//
-#define X_STOP_PIN P1_24
-#define Y_STOP_PIN P1_26
-#define Z_STOP_PIN P1_28
-
-#ifndef FILWIDTH_PIN
- #define FILWIDTH_PIN P2_04
-#endif
-
-//
-// Steppers
-//
-#define X_STEP_PIN P2_01
-#define X_DIR_PIN P0_11
-#define X_ENABLE_PIN P0_10
-
-#define Y_STEP_PIN P2_02
-#define Y_DIR_PIN P0_20
-#define Y_ENABLE_PIN P0_19
-
-#define Z_STEP_PIN P2_03
-#define Z_DIR_PIN P0_22
-#define Z_ENABLE_PIN P0_21
-
-#define E0_STEP_PIN P2_00
-#define E0_DIR_PIN P0_05
-#define E0_ENABLE_PIN P0_04
//
// DIGIPOT slave addresses
//
-#define DIGIPOT_I2C_ADDRESS_A 0x58 // shifted slave address for first DIGIPOT (0x58 <- 0x2C << 1)
-#define DIGIPOT_I2C_ADDRESS_B 0x5C // shifted slave address for second DIGIPOT (0x5C <- 0x2E << 1)
-
-//
-// Temperature Sensors
-// 3.3V max when defined as an analog input
-//
-#define TEMP_BED_PIN 0 // A0 (TH1)
-#define TEMP_0_PIN 1 // A1 (TH2)
-
-//
-// Heaters / Fans
-//
-#define HEATER_BED_PIN P2_07
-#define HEATER_0_PIN P2_05
-#ifndef FAN_PIN
- #define FAN_PIN P0_26
+#ifndef DIGIPOT_I2C_ADDRESS_A
+ #define DIGIPOT_I2C_ADDRESS_A 0x58 // shifted slave address for first DIGIPOT (0x58 <- 0x2C << 1)
#endif
-#define FAN1_PIN P1_25
-
-//
-// Display
-//
-#if ENABLED(ULTRA_LCD)
-
- #if ENABLED(CR10_STOCKDISPLAY)
-
- // Re-Arm can support Creality stock display without SD card reader and single cable on EXP3.
- // Re-Arm J3 pins 1 (p1.31) & 2 (P3.26) are not used. Stock cable will need to have one
- // 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3.
- // Requires REVERSE_ENCODER_DIRECTION in Configuration.h
-
- #define BEEPER_PIN P2_11 // J3-3 & AUX-4
-
- #define BTN_EN1 P0_16 // J3-7 & AUX-4
- #define BTN_EN2 P1_23 // J3-5 & AUX-4
- #define BTN_ENC P3_25 // J3-4 & AUX-4
-
- #define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS)
- #define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI)
- #define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK)
-
- #else
-
- #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
- #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
- #define BTN_ENC P2_11 // (35) J3-3 & AUX-4
-
- #define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
- #define KILL_PIN P1_22 // (41) J5-4 & AUX-4
- #define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4
- #define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
- #define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
- #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
- #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
-
- #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
-
- #if ENABLED(REPRAPWORLD_KEYPAD)
- #define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3
- #define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3
- #define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3
- #elif DISABLED(NEWPANEL)
- //#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
- //#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
- //#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
- //#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4
- #endif
-
- #if ANY(VIKI2, miniVIKI)
- //#define LCD_SCREEN_ROT_180
-
- #define BEEPER_PIN P1_30 // (37) may change if cable changes
- #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
- #define DOGLCD_SCK SCK_PIN
- #define DOGLCD_MOSI MOSI_PIN
-
- #define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
- #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
- #else
- #if ENABLED(ULTIPANEL)
- #define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
- #define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
- #define LCD_PINS_D7 P1_10 // (75) ENET_RXD1
- #endif
- #define BEEPER_PIN P1_30 // (37) not 5V tolerant
- #define DOGLCD_CS P0_16 // (16)
- #endif
-
- #if ENABLED(MINIPANEL)
- // GLCD features
- // Uncomment screen orientation
- //#define LCD_SCREEN_ROT_90
- //#define LCD_SCREEN_ROT_180
- //#define LCD_SCREEN_ROT_270
- #endif
-
- #endif
-
-#endif // ULTRA_LCD
-
-//
-// SD Support
-//
-//#define USB_SD_DISABLED // Disable host access to SD card as mass storage device through USB
-//#define USB_SD_ONBOARD // Enable host access to SD card as mass storage device through USB
-
-//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD
-#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board. There is no SD detect pin
- // for the onboard card. Init card from LCD menu or send M21 whenever printer
- // is powered on to enable SD access.
-
-#if ENABLED(LPC_SD_LCD)
-
- #define SCK_PIN P0_15
- #define MISO_PIN P0_17
- #define MOSI_PIN P0_18
- #define SS_PIN P1_23 // Chip select for SD card used by Marlin
- #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
-
-#elif ENABLED(LPC_SD_ONBOARD)
-
- #if ENABLED(USB_SD_ONBOARD)
- // When sharing the SD card with a PC we want the menu options to
- // mount/unmount the card and refresh it. So we disable card detect.
- #define SHARED_SD_CARD
- #undef SD_DETECT_PIN // there is also no detect pin for the onboard card
- #endif
- #define SCK_PIN P0_07
- #define MISO_PIN P0_08
- #define MOSI_PIN P0_09
- #define SS_PIN P0_06 // Chip select for SD card used by Marlin
- #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
-
+#ifndef DIGIPOT_I2C_ADDRESS_B
+ #define DIGIPOT_I2C_ADDRESS_B 0x5C // shifted slave address for second DIGIPOT (0x5C <- 0x2E << 1)
#endif
+
+#include "pins_AZTEEG_X5_MINI.h"
diff --git a/Marlin/src/pins/pins_MIGHTYBOARD_REVE.h b/Marlin/src/pins/pins_MIGHTYBOARD_REVE.h
index 079aab3589..d9def846c2 100644
--- a/Marlin/src/pins/pins_MIGHTYBOARD_REVE.h
+++ b/Marlin/src/pins/pins_MIGHTYBOARD_REVE.h
@@ -104,7 +104,9 @@
#define DIGIPOTS_I2C_SDA_E0 27 // A5
#define DIGIPOTS_I2C_SDA_E1 77 // J6
-#define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1)
+#ifndef DIGIPOT_I2C_ADDRESS_A
+ #define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1)
+#endif
//
// Temperature Sensors