mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-27 13:56:24 +00:00
Fix for DUE - no host support on native USB if SD card not enabled (#10148)
This commit is contained in:
Eduardo José Tagle
Scott Lahteine
parent
772810fb24
commit
bbfbf90797
@ -54,11 +54,7 @@
|
||||
*/
|
||||
//! @{
|
||||
|
||||
#ifdef SDSUPPORT
|
||||
#define LUN_0 ENABLE //!< SD/MMC Card over MCI Slot 0.
|
||||
#else
|
||||
#define LUN_0 DISABLE
|
||||
#endif
|
||||
#define LUN_0 ENABLE //!< SD/MMC Card over MCI Slot 0.
|
||||
#define LUN_1 DISABLE
|
||||
#define LUN_2 DISABLE
|
||||
#define LUN_3 DISABLE
|
||||
|
||||
@ -114,48 +114,51 @@
|
||||
#define USB_DEVICE_SPECIFIC_REQUEST() usb_task_other_requests()
|
||||
//@}
|
||||
|
||||
/**
|
||||
* USB Device low level configuration
|
||||
* When only one interface is used, these configurations are defined by the class module.
|
||||
* For composite device, these configuration must be defined here
|
||||
* @{
|
||||
*/
|
||||
//! Control endpoint size
|
||||
#define USB_DEVICE_EP_CTRL_SIZE 64
|
||||
#if ENABLED(SDSUPPORT)
|
||||
/**
|
||||
* USB Device low level configuration
|
||||
* When only one interface is used, these configurations are defined by the class module.
|
||||
* For composite device, these configuration must be defined here
|
||||
* @{
|
||||
*/
|
||||
//! Control endpoint size
|
||||
#define USB_DEVICE_EP_CTRL_SIZE 64
|
||||
|
||||
//! Two interfaces for this device (CDC COM + CDC DATA + MSC)
|
||||
#define USB_DEVICE_NB_INTERFACE 3
|
||||
//! Two interfaces for this device (CDC COM + CDC DATA + MSC)
|
||||
#define USB_DEVICE_NB_INTERFACE 3
|
||||
|
||||
//! 5 endpoints used by CDC and MSC interfaces
|
||||
#if SAM3U
|
||||
// (3 | USB_EP_DIR_IN) // CDC Notify endpoint
|
||||
// (6 | USB_EP_DIR_IN) // CDC TX
|
||||
// (5 | USB_EP_DIR_OUT) // CDC RX
|
||||
// (1 | USB_EP_DIR_IN) // MSC IN
|
||||
// (2 | USB_EP_DIR_OUT) // MSC OUT
|
||||
# define USB_DEVICE_MAX_EP 6
|
||||
# if defined(USB_DEVICE_HS_SUPPORT)
|
||||
// In HS mode, size of bulk endpoints are 512
|
||||
// If CDC and MSC endpoints all uses 2 banks, DPRAM is not enough: 4 bulk
|
||||
// endpoints requires 4K bytes. So reduce the number of banks of CDC bulk
|
||||
// endpoints to use less DPRAM. Keep MSC setting to keep MSC performance.
|
||||
# define UDD_BULK_NB_BANK(ep) ((ep == 5 || ep== 6) ? 1 : 2)
|
||||
#endif
|
||||
#else
|
||||
// (3 | USB_EP_DIR_IN) // CDC Notify endpoint
|
||||
// (4 | USB_EP_DIR_IN) // CDC TX
|
||||
// (5 | USB_EP_DIR_OUT) // CDC RX
|
||||
// (1 | USB_EP_DIR_IN) // MSC IN
|
||||
// (2 | USB_EP_DIR_OUT) // MSC OUT
|
||||
# define USB_DEVICE_MAX_EP 5
|
||||
# if SAM3XA && defined(USB_DEVICE_HS_SUPPORT)
|
||||
// In HS mode, size of bulk endpoints are 512
|
||||
// If CDC and MSC endpoints all uses 2 banks, DPRAM is not enough: 4 bulk
|
||||
// endpoints requires 4K bytes. So reduce the number of banks of CDC bulk
|
||||
// endpoints to use less DPRAM. Keep MSC setting to keep MSC performance.
|
||||
# define UDD_BULK_NB_BANK(ep) ((ep == 4 || ep== 5) ? 1 : 2)
|
||||
# endif
|
||||
//! 5 endpoints used by CDC and MSC interfaces
|
||||
#if SAM3U
|
||||
// (3 | USB_EP_DIR_IN) // CDC Notify endpoint
|
||||
// (6 | USB_EP_DIR_IN) // CDC TX
|
||||
// (5 | USB_EP_DIR_OUT) // CDC RX
|
||||
// (1 | USB_EP_DIR_IN) // MSC IN
|
||||
// (2 | USB_EP_DIR_OUT) // MSC OUT
|
||||
# define USB_DEVICE_MAX_EP 6
|
||||
# if defined(USB_DEVICE_HS_SUPPORT)
|
||||
// In HS mode, size of bulk endpoints are 512
|
||||
// If CDC and MSC endpoints all uses 2 banks, DPRAM is not enough: 4 bulk
|
||||
// endpoints requires 4K bytes. So reduce the number of banks of CDC bulk
|
||||
// endpoints to use less DPRAM. Keep MSC setting to keep MSC performance.
|
||||
# define UDD_BULK_NB_BANK(ep) ((ep == 5 || ep== 6) ? 1 : 2)
|
||||
#endif
|
||||
#else
|
||||
// (3 | USB_EP_DIR_IN) // CDC Notify endpoint
|
||||
// (4 | USB_EP_DIR_IN) // CDC TX
|
||||
// (5 | USB_EP_DIR_OUT) // CDC RX
|
||||
// (1 | USB_EP_DIR_IN) // MSC IN
|
||||
// (2 | USB_EP_DIR_OUT) // MSC OUT
|
||||
# define USB_DEVICE_MAX_EP 5
|
||||
# if SAM3XA && defined(USB_DEVICE_HS_SUPPORT)
|
||||
// In HS mode, size of bulk endpoints are 512
|
||||
// If CDC and MSC endpoints all uses 2 banks, DPRAM is not enough: 4 bulk
|
||||
// endpoints requires 4K bytes. So reduce the number of banks of CDC bulk
|
||||
// endpoints to use less DPRAM. Keep MSC setting to keep MSC performance.
|
||||
# define UDD_BULK_NB_BANK(ep) ((ep == 4 || ep== 5) ? 1 : 2)
|
||||
# endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//@}
|
||||
|
||||
//@}
|
||||
@ -195,107 +198,112 @@
|
||||
//! Enable id string of interface to add an extra USB string
|
||||
#define UDI_CDC_IAD_STRING_ID 4
|
||||
|
||||
/**
|
||||
* USB CDC low level configuration
|
||||
* In standalone these configurations are defined by the CDC module.
|
||||
* For composite device, these configuration must be defined here
|
||||
* @{
|
||||
*/
|
||||
//! Endpoint numbers definition
|
||||
#if SAM3U
|
||||
# define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
|
||||
# define UDI_CDC_DATA_EP_IN_0 (6 | USB_EP_DIR_IN) // TX
|
||||
# define UDI_CDC_DATA_EP_OUT_0 (5 | USB_EP_DIR_OUT)// RX
|
||||
#if ENABLED(SDSUPPORT)
|
||||
/**
|
||||
* USB CDC low level configuration
|
||||
* In standalone these configurations are defined by the CDC module.
|
||||
* For composite device, these configuration must be defined here
|
||||
* @{
|
||||
*/
|
||||
//! Endpoint numbers definition
|
||||
#if SAM3U
|
||||
# define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
|
||||
# define UDI_CDC_DATA_EP_IN_0 (6 | USB_EP_DIR_IN) // TX
|
||||
# define UDI_CDC_DATA_EP_OUT_0 (5 | USB_EP_DIR_OUT)// RX
|
||||
#else
|
||||
# define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
|
||||
# define UDI_CDC_DATA_EP_IN_0 (4 | USB_EP_DIR_IN) // TX
|
||||
# define UDI_CDC_DATA_EP_OUT_0 (5 | USB_EP_DIR_OUT)// RX
|
||||
#endif
|
||||
|
||||
//! Interface numbers
|
||||
#define UDI_CDC_COMM_IFACE_NUMBER_0 0
|
||||
#define UDI_CDC_DATA_IFACE_NUMBER_0 1
|
||||
|
||||
//@}
|
||||
//@}
|
||||
|
||||
|
||||
/**
|
||||
* Configuration of MSC interface
|
||||
* @{
|
||||
*/
|
||||
//! Vendor name and Product version of MSC interface
|
||||
#define UDI_MSC_GLOBAL_VENDOR_ID \
|
||||
'M', 'A', 'R', 'L', 'I', 'N', '3', 'D'
|
||||
#define UDI_MSC_GLOBAL_PRODUCT_VERSION \
|
||||
'1', '.', '0', '0'
|
||||
|
||||
//! Interface callback definition
|
||||
#define UDI_MSC_ENABLE_EXT() usb_task_msc_enable()
|
||||
#define UDI_MSC_DISABLE_EXT() usb_task_msc_disable()
|
||||
|
||||
//! Enable id string of interface to add an extra USB string
|
||||
#define UDI_MSC_STRING_ID 5
|
||||
|
||||
/**
|
||||
* USB MSC low level configuration
|
||||
* In standalone these configurations are defined by the MSC module.
|
||||
* For composite device, these configuration must be defined here
|
||||
* @{
|
||||
*/
|
||||
//! Endpoint numbers definition
|
||||
#define UDI_MSC_EP_IN (1 | USB_EP_DIR_IN)
|
||||
#define UDI_MSC_EP_OUT (2 | USB_EP_DIR_OUT)
|
||||
|
||||
//! Interface number
|
||||
#define UDI_MSC_IFACE_NUMBER 2
|
||||
//@}
|
||||
//@}
|
||||
|
||||
//@}
|
||||
|
||||
|
||||
/**
|
||||
* Description of Composite Device
|
||||
* @{
|
||||
*/
|
||||
//! USB Interfaces descriptor structure
|
||||
#define UDI_COMPOSITE_DESC_T \
|
||||
usb_iad_desc_t udi_cdc_iad; \
|
||||
udi_cdc_comm_desc_t udi_cdc_comm; \
|
||||
udi_cdc_data_desc_t udi_cdc_data; \
|
||||
udi_msc_desc_t udi_msc
|
||||
|
||||
//! USB Interfaces descriptor value for Full Speed
|
||||
#define UDI_COMPOSITE_DESC_FS \
|
||||
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
|
||||
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
|
||||
.udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \
|
||||
.udi_msc = UDI_MSC_DESC_FS
|
||||
|
||||
//! USB Interfaces descriptor value for High Speed
|
||||
#define UDI_COMPOSITE_DESC_HS \
|
||||
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
|
||||
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
|
||||
.udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \
|
||||
.udi_msc = UDI_MSC_DESC_HS
|
||||
|
||||
//! USB Interface APIs
|
||||
#define UDI_COMPOSITE_API \
|
||||
&udi_api_cdc_comm, \
|
||||
&udi_api_cdc_data, \
|
||||
&udi_api_msc
|
||||
//@}
|
||||
|
||||
/**
|
||||
* USB Device Driver Configuration
|
||||
* @{
|
||||
*/
|
||||
//@}
|
||||
|
||||
//! The includes of classes and other headers must be done at the end of this file to avoid compile error
|
||||
#include "udi_cdc.h"
|
||||
#include "udi_msc.h"
|
||||
#else
|
||||
# define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
|
||||
# define UDI_CDC_DATA_EP_IN_0 (4 | USB_EP_DIR_IN) // TX
|
||||
# define UDI_CDC_DATA_EP_OUT_0 (5 | USB_EP_DIR_OUT)// RX
|
||||
#include "udi_cdc_conf.h"
|
||||
#endif
|
||||
|
||||
//! Interface numbers
|
||||
#define UDI_CDC_COMM_IFACE_NUMBER_0 0
|
||||
#define UDI_CDC_DATA_IFACE_NUMBER_0 1
|
||||
//@}
|
||||
//@}
|
||||
|
||||
|
||||
/**
|
||||
* Configuration of MSC interface
|
||||
* @{
|
||||
*/
|
||||
//! Vendor name and Product version of MSC interface
|
||||
#define UDI_MSC_GLOBAL_VENDOR_ID \
|
||||
'M', 'A', 'R', 'L', 'I', 'N', '3', 'D'
|
||||
#define UDI_MSC_GLOBAL_PRODUCT_VERSION \
|
||||
'1', '.', '0', '0'
|
||||
|
||||
//! Interface callback definition
|
||||
#define UDI_MSC_ENABLE_EXT() usb_task_msc_enable()
|
||||
#define UDI_MSC_DISABLE_EXT() usb_task_msc_disable()
|
||||
|
||||
//! Enable id string of interface to add an extra USB string
|
||||
#define UDI_MSC_STRING_ID 5
|
||||
|
||||
/**
|
||||
* USB MSC low level configuration
|
||||
* In standalone these configurations are defined by the MSC module.
|
||||
* For composite device, these configuration must be defined here
|
||||
* @{
|
||||
*/
|
||||
//! Endpoint numbers definition
|
||||
#define UDI_MSC_EP_IN (1 | USB_EP_DIR_IN)
|
||||
#define UDI_MSC_EP_OUT (2 | USB_EP_DIR_OUT)
|
||||
|
||||
//! Interface number
|
||||
#define UDI_MSC_IFACE_NUMBER 2
|
||||
//@}
|
||||
//@}
|
||||
|
||||
//@}
|
||||
|
||||
|
||||
/**
|
||||
* Description of Composite Device
|
||||
* @{
|
||||
*/
|
||||
//! USB Interfaces descriptor structure
|
||||
#define UDI_COMPOSITE_DESC_T \
|
||||
usb_iad_desc_t udi_cdc_iad; \
|
||||
udi_cdc_comm_desc_t udi_cdc_comm; \
|
||||
udi_cdc_data_desc_t udi_cdc_data; \
|
||||
udi_msc_desc_t udi_msc
|
||||
|
||||
//! USB Interfaces descriptor value for Full Speed
|
||||
#define UDI_COMPOSITE_DESC_FS \
|
||||
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
|
||||
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
|
||||
.udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \
|
||||
.udi_msc = UDI_MSC_DESC_FS
|
||||
|
||||
//! USB Interfaces descriptor value for High Speed
|
||||
#define UDI_COMPOSITE_DESC_HS \
|
||||
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
|
||||
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
|
||||
.udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \
|
||||
.udi_msc = UDI_MSC_DESC_HS
|
||||
|
||||
//! USB Interface APIs
|
||||
#define UDI_COMPOSITE_API \
|
||||
&udi_api_cdc_comm, \
|
||||
&udi_api_cdc_data, \
|
||||
&udi_api_msc
|
||||
//@}
|
||||
|
||||
|
||||
/**
|
||||
* USB Device Driver Configuration
|
||||
* @{
|
||||
*/
|
||||
//@}
|
||||
|
||||
//! The includes of classes and other headers must be done at the end of this file to avoid compile error
|
||||
#include "udi_cdc.h"
|
||||
#include "udi_msc.h"
|
||||
#include "usb_task.h"
|
||||
|
||||
#endif // _CONF_USB_H_
|
||||
|
||||
156
Marlin/src/HAL/HAL_DUE/usb/udi_cdc_conf.h
Normal file
156
Marlin/src/HAL/HAL_DUE/usb/udi_cdc_conf.h
Normal file
@ -0,0 +1,156 @@
|
||||
/**
|
||||
* \file
|
||||
*
|
||||
* \brief Default CDC configuration for a USB Device with a single interface
|
||||
*
|
||||
* Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
|
||||
*
|
||||
* \asf_license_start
|
||||
*
|
||||
* \page License
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. The name of Atmel may not be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* 4. This software may only be redistributed and used in connection with an
|
||||
* Atmel microcontroller product.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
|
||||
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* \asf_license_stop
|
||||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef _UDI_CDC_CONF_H_
|
||||
#define _UDI_CDC_CONF_H_
|
||||
|
||||
#include "usb_protocol_cdc.h"
|
||||
#include "conf_usb.h"
|
||||
|
||||
#ifndef UDI_CDC_PORT_NB
|
||||
# define UDI_CDC_PORT_NB 1
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
* \addtogroup udi_cdc_group_single_desc
|
||||
* @{
|
||||
*/
|
||||
|
||||
//! Control endpoint size (Endpoint 0)
|
||||
#define USB_DEVICE_EP_CTRL_SIZE 64
|
||||
|
||||
#if XMEGA
|
||||
/**
|
||||
* \name Endpoint configuration on XMEGA
|
||||
* The XMEGA supports a IN and OUT endpoint with the same number endpoint,
|
||||
* thus XMEGA can support up to 7 CDC interfaces.
|
||||
*/
|
||||
//@{
|
||||
#define UDI_CDC_DATA_EP_IN_0 ( 1 | USB_EP_DIR_IN) // TX
|
||||
#define UDI_CDC_DATA_EP_OUT_0 ( 2 | USB_EP_DIR_OUT) // RX
|
||||
#define UDI_CDC_COMM_EP_0 ( 2 | USB_EP_DIR_IN) // Notify endpoint
|
||||
#define UDI_CDC_DATA_EP_IN_1 ( 3 | USB_EP_DIR_IN) // TX
|
||||
#define UDI_CDC_DATA_EP_OUT_1 ( 4 | USB_EP_DIR_OUT) // RX
|
||||
#define UDI_CDC_COMM_EP_1 ( 4 | USB_EP_DIR_IN) // Notify endpoint
|
||||
#define UDI_CDC_DATA_EP_IN_2 ( 5 | USB_EP_DIR_IN) // TX
|
||||
#define UDI_CDC_DATA_EP_OUT_2 ( 6 | USB_EP_DIR_OUT) // RX
|
||||
#define UDI_CDC_COMM_EP_2 ( 6 | USB_EP_DIR_IN) // Notify endpoint
|
||||
#define UDI_CDC_DATA_EP_IN_3 ( 7 | USB_EP_DIR_IN) // TX
|
||||
#define UDI_CDC_DATA_EP_OUT_3 ( 8 | USB_EP_DIR_OUT) // RX
|
||||
#define UDI_CDC_COMM_EP_3 ( 8 | USB_EP_DIR_IN) // Notify endpoint
|
||||
#define UDI_CDC_DATA_EP_IN_4 ( 9 | USB_EP_DIR_IN) // TX
|
||||
#define UDI_CDC_DATA_EP_OUT_4 (10 | USB_EP_DIR_OUT) // RX
|
||||
#define UDI_CDC_COMM_EP_4 (10 | USB_EP_DIR_IN) // Notify endpoint
|
||||
#define UDI_CDC_DATA_EP_IN_5 (11 | USB_EP_DIR_IN) // TX
|
||||
#define UDI_CDC_DATA_EP_OUT_5 (12 | USB_EP_DIR_OUT) // RX
|
||||
#define UDI_CDC_COMM_EP_5 (12 | USB_EP_DIR_IN) // Notify endpoint
|
||||
#define UDI_CDC_DATA_EP_IN_6 (13 | USB_EP_DIR_IN) // TX
|
||||
#define UDI_CDC_DATA_EP_OUT_6 (14 | USB_EP_DIR_OUT) // RX
|
||||
#define UDI_CDC_COMM_EP_6 (14 | USB_EP_DIR_IN) // Notify endpoint
|
||||
//! 2 endpoints numbers used per CDC interface
|
||||
#define USB_DEVICE_MAX_EP (2*UDI_CDC_PORT_NB)
|
||||
//@}
|
||||
|
||||
#else
|
||||
|
||||
/**
|
||||
* \name Default endpoint configuration
|
||||
* The USBB, UDP, UDPHS and UOTGHS interfaces can support up to 2 CDC interfaces.
|
||||
*/
|
||||
//@{
|
||||
# if UDI_CDC_PORT_NB > 2
|
||||
# error USBB, UDP, UDPHS and UOTGHS interfaces have not enought endpoints.
|
||||
# endif
|
||||
#define UDI_CDC_DATA_EP_IN_0 (1 | USB_EP_DIR_IN) // TX
|
||||
#define UDI_CDC_DATA_EP_OUT_0 (2 | USB_EP_DIR_OUT) // RX
|
||||
#define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
|
||||
# if SAM3U
|
||||
/* For 3U max endpoint size of 4 is 64, use 5 and 6 as bulk tx and rx */
|
||||
# define UDI_CDC_DATA_EP_IN_1 (6 | USB_EP_DIR_IN) // TX
|
||||
# define UDI_CDC_DATA_EP_OUT_1 (5 | USB_EP_DIR_OUT) // RX
|
||||
# define UDI_CDC_COMM_EP_1 (4 | USB_EP_DIR_IN) // Notify
|
||||
# else
|
||||
# define UDI_CDC_DATA_EP_IN_1 (4 | USB_EP_DIR_IN) // TX
|
||||
# define UDI_CDC_DATA_EP_OUT_1 (5 | USB_EP_DIR_OUT) // RX
|
||||
# define UDI_CDC_COMM_EP_1 (6 | USB_EP_DIR_IN) // Notify
|
||||
# endif
|
||||
//! 3 endpoints used per CDC interface
|
||||
#undef USB_DEVICE_MAX_EP // undefine this definition in header file
|
||||
#define USB_DEVICE_MAX_EP (3*UDI_CDC_PORT_NB)
|
||||
//@}
|
||||
|
||||
#endif
|
||||
|
||||
/**
|
||||
* \name Default Interface numbers
|
||||
*/
|
||||
//@{
|
||||
#define UDI_CDC_COMM_IFACE_NUMBER_0 0
|
||||
#define UDI_CDC_DATA_IFACE_NUMBER_0 1
|
||||
#define UDI_CDC_COMM_IFACE_NUMBER_1 2
|
||||
#define UDI_CDC_DATA_IFACE_NUMBER_1 3
|
||||
#define UDI_CDC_COMM_IFACE_NUMBER_2 4
|
||||
#define UDI_CDC_DATA_IFACE_NUMBER_2 5
|
||||
#define UDI_CDC_COMM_IFACE_NUMBER_3 6
|
||||
#define UDI_CDC_DATA_IFACE_NUMBER_3 7
|
||||
#define UDI_CDC_COMM_IFACE_NUMBER_4 8
|
||||
#define UDI_CDC_DATA_IFACE_NUMBER_4 9
|
||||
#define UDI_CDC_COMM_IFACE_NUMBER_5 10
|
||||
#define UDI_CDC_DATA_IFACE_NUMBER_5 11
|
||||
#define UDI_CDC_COMM_IFACE_NUMBER_6 12
|
||||
#define UDI_CDC_DATA_IFACE_NUMBER_6 13
|
||||
//@}
|
||||
|
||||
//@}
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif // _UDI_CDC_CONF_H_
|
||||
259
Marlin/src/HAL/HAL_DUE/usb/udi_cdc_desc.c
Normal file
259
Marlin/src/HAL/HAL_DUE/usb/udi_cdc_desc.c
Normal file
@ -0,0 +1,259 @@
|
||||
/**
|
||||
* \file
|
||||
*
|
||||
* \brief Default descriptors for a USB Device with a single interface CDC
|
||||
*
|
||||
* Copyright (c) 2009-2016 Atmel Corporation. All rights reserved.
|
||||
*
|
||||
* \asf_license_start
|
||||
*
|
||||
* \page License
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. The name of Atmel may not be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* 4. This software may only be redistributed and used in connection with an
|
||||
* Atmel microcontroller product.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
|
||||
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* \asf_license_stop
|
||||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifdef ARDUINO_ARCH_SAM
|
||||
|
||||
#include "conf_usb.h"
|
||||
#include "udd.h"
|
||||
#include "udc_desc.h"
|
||||
#include "udi_cdc.h"
|
||||
|
||||
#if DISABLED(SDSUPPORT)
|
||||
|
||||
/**
|
||||
* \defgroup udi_cdc_group_single_desc USB device descriptors for a single interface
|
||||
*
|
||||
* The following structures provide the USB device descriptors required for
|
||||
* USB Device with a single interface CDC.
|
||||
*
|
||||
* It is ready to use and do not require more definition.
|
||||
*
|
||||
* @{
|
||||
*/
|
||||
|
||||
//! Two interfaces for a CDC device
|
||||
#define USB_DEVICE_NB_INTERFACE (2*UDI_CDC_PORT_NB)
|
||||
|
||||
#ifdef USB_DEVICE_LPM_SUPPORT
|
||||
# define USB_VERSION USB_V2_1
|
||||
#else
|
||||
# define USB_VERSION USB_V2_0
|
||||
#endif
|
||||
|
||||
//! USB Device Descriptor
|
||||
COMPILER_WORD_ALIGNED
|
||||
UDC_DESC_STORAGE usb_dev_desc_t udc_device_desc = {
|
||||
.bLength = sizeof(usb_dev_desc_t),
|
||||
.bDescriptorType = USB_DT_DEVICE,
|
||||
.bcdUSB = LE16(USB_VERSION),
|
||||
#if UDI_CDC_PORT_NB > 1
|
||||
.bDeviceClass = 0,
|
||||
#else
|
||||
.bDeviceClass = CDC_CLASS_DEVICE,
|
||||
#endif
|
||||
.bDeviceSubClass = 0,
|
||||
.bDeviceProtocol = 0,
|
||||
.bMaxPacketSize0 = USB_DEVICE_EP_CTRL_SIZE,
|
||||
.idVendor = LE16(USB_DEVICE_VENDOR_ID),
|
||||
.idProduct = LE16(USB_DEVICE_PRODUCT_ID),
|
||||
.bcdDevice = LE16((USB_DEVICE_MAJOR_VERSION << 8)
|
||||
| USB_DEVICE_MINOR_VERSION),
|
||||
#ifdef USB_DEVICE_MANUFACTURE_NAME
|
||||
.iManufacturer = 1,
|
||||
#else
|
||||
.iManufacturer = 0, // No manufacture string
|
||||
#endif
|
||||
#ifdef USB_DEVICE_PRODUCT_NAME
|
||||
.iProduct = 2,
|
||||
#else
|
||||
.iProduct = 0, // No product string
|
||||
#endif
|
||||
#if (defined USB_DEVICE_SERIAL_NAME || defined USB_DEVICE_GET_SERIAL_NAME_POINTER)
|
||||
.iSerialNumber = 3,
|
||||
#else
|
||||
.iSerialNumber = 0, // No serial string
|
||||
#endif
|
||||
.bNumConfigurations = 1
|
||||
};
|
||||
|
||||
|
||||
#ifdef USB_DEVICE_HS_SUPPORT
|
||||
//! USB Device Qualifier Descriptor for HS
|
||||
COMPILER_WORD_ALIGNED
|
||||
UDC_DESC_STORAGE usb_dev_qual_desc_t udc_device_qual = {
|
||||
.bLength = sizeof(usb_dev_qual_desc_t),
|
||||
.bDescriptorType = USB_DT_DEVICE_QUALIFIER,
|
||||
.bcdUSB = LE16(USB_VERSION),
|
||||
#if UDI_CDC_PORT_NB > 1
|
||||
.bDeviceClass = 0,
|
||||
#else
|
||||
.bDeviceClass = CDC_CLASS_DEVICE,
|
||||
#endif
|
||||
.bDeviceSubClass = 0,
|
||||
.bDeviceProtocol = 0,
|
||||
.bMaxPacketSize0 = USB_DEVICE_EP_CTRL_SIZE,
|
||||
.bNumConfigurations = 1
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef USB_DEVICE_LPM_SUPPORT
|
||||
//! USB Device Qualifier Descriptor
|
||||
COMPILER_WORD_ALIGNED
|
||||
UDC_DESC_STORAGE usb_dev_lpm_desc_t udc_device_lpm = {
|
||||
.bos.bLength = sizeof(usb_dev_bos_desc_t),
|
||||
.bos.bDescriptorType = USB_DT_BOS,
|
||||
.bos.wTotalLength = LE16(sizeof(usb_dev_bos_desc_t) + sizeof(usb_dev_capa_ext_desc_t)),
|
||||
.bos.bNumDeviceCaps = 1,
|
||||
.capa_ext.bLength = sizeof(usb_dev_capa_ext_desc_t),
|
||||
.capa_ext.bDescriptorType = USB_DT_DEVICE_CAPABILITY,
|
||||
.capa_ext.bDevCapabilityType = USB_DC_USB20_EXTENSION,
|
||||
.capa_ext.bmAttributes = USB_DC_EXT_LPM,
|
||||
};
|
||||
#endif
|
||||
|
||||
//! Structure for USB Device Configuration Descriptor
|
||||
COMPILER_PACK_SET(1)
|
||||
typedef struct {
|
||||
usb_conf_desc_t conf;
|
||||
#if UDI_CDC_PORT_NB == 1
|
||||
udi_cdc_comm_desc_t udi_cdc_comm_0;
|
||||
udi_cdc_data_desc_t udi_cdc_data_0;
|
||||
#else
|
||||
# define UDI_CDC_DESC_STRUCTURE(index, unused) \
|
||||
usb_iad_desc_t udi_cdc_iad_##index; \
|
||||
udi_cdc_comm_desc_t udi_cdc_comm_##index; \
|
||||
udi_cdc_data_desc_t udi_cdc_data_##index;
|
||||
MREPEAT(UDI_CDC_PORT_NB, UDI_CDC_DESC_STRUCTURE, ~)
|
||||
# undef UDI_CDC_DESC_STRUCTURE
|
||||
#endif
|
||||
} udc_desc_t;
|
||||
COMPILER_PACK_RESET()
|
||||
|
||||
//! USB Device Configuration Descriptor filled for full and high speed
|
||||
COMPILER_WORD_ALIGNED
|
||||
UDC_DESC_STORAGE udc_desc_t udc_desc_fs = {
|
||||
.conf.bLength = sizeof(usb_conf_desc_t),
|
||||
.conf.bDescriptorType = USB_DT_CONFIGURATION,
|
||||
.conf.wTotalLength = LE16(sizeof(udc_desc_t)),
|
||||
.conf.bNumInterfaces = USB_DEVICE_NB_INTERFACE,
|
||||
.conf.bConfigurationValue = 1,
|
||||
.conf.iConfiguration = 0,
|
||||
.conf.bmAttributes = USB_CONFIG_ATTR_MUST_SET | USB_DEVICE_ATTR,
|
||||
.conf.bMaxPower = USB_CONFIG_MAX_POWER(USB_DEVICE_POWER),
|
||||
#if UDI_CDC_PORT_NB == 1
|
||||
.udi_cdc_comm_0 = UDI_CDC_COMM_DESC_0,
|
||||
.udi_cdc_data_0 = UDI_CDC_DATA_DESC_0_FS,
|
||||
#else
|
||||
# define UDI_CDC_DESC_FS(index, unused) \
|
||||
.udi_cdc_iad_##index = UDI_CDC_IAD_DESC_##index,\
|
||||
.udi_cdc_comm_##index = UDI_CDC_COMM_DESC_##index,\
|
||||
.udi_cdc_data_##index = UDI_CDC_DATA_DESC_##index##_FS,
|
||||
MREPEAT(UDI_CDC_PORT_NB, UDI_CDC_DESC_FS, ~)
|
||||
# undef UDI_CDC_DESC_FS
|
||||
#endif
|
||||
};
|
||||
|
||||
#ifdef USB_DEVICE_HS_SUPPORT
|
||||
COMPILER_WORD_ALIGNED
|
||||
UDC_DESC_STORAGE udc_desc_t udc_desc_hs = {
|
||||
.conf.bLength = sizeof(usb_conf_desc_t),
|
||||
.conf.bDescriptorType = USB_DT_CONFIGURATION,
|
||||
.conf.wTotalLength = LE16(sizeof(udc_desc_t)),
|
||||
.conf.bNumInterfaces = USB_DEVICE_NB_INTERFACE,
|
||||
.conf.bConfigurationValue = 1,
|
||||
.conf.iConfiguration = 0,
|
||||
.conf.bmAttributes = USB_CONFIG_ATTR_MUST_SET | USB_DEVICE_ATTR,
|
||||
.conf.bMaxPower = USB_CONFIG_MAX_POWER(USB_DEVICE_POWER),
|
||||
#if UDI_CDC_PORT_NB == 1
|
||||
.udi_cdc_comm_0 = UDI_CDC_COMM_DESC_0,
|
||||
.udi_cdc_data_0 = UDI_CDC_DATA_DESC_0_HS,
|
||||
#else
|
||||
# define UDI_CDC_DESC_HS(index, unused) \
|
||||
.udi_cdc_iad_##index = UDI_CDC_IAD_DESC_##index, \
|
||||
.udi_cdc_comm_##index = UDI_CDC_COMM_DESC_##index, \
|
||||
.udi_cdc_data_##index = UDI_CDC_DATA_DESC_##index##_HS,
|
||||
MREPEAT(UDI_CDC_PORT_NB, UDI_CDC_DESC_HS, ~)
|
||||
# undef UDI_CDC_DESC_HS
|
||||
#endif
|
||||
};
|
||||
#endif
|
||||
|
||||
/**
|
||||
* \name UDC structures which content all USB Device definitions
|
||||
*/
|
||||
//@{
|
||||
|
||||
//! Associate an UDI for each USB interface
|
||||
UDC_DESC_STORAGE udi_api_t *udi_apis[USB_DEVICE_NB_INTERFACE] = {
|
||||
# define UDI_CDC_API(index, unused) \
|
||||
&udi_api_cdc_comm, \
|
||||
&udi_api_cdc_data,
|
||||
MREPEAT(UDI_CDC_PORT_NB, UDI_CDC_API, ~)
|
||||
# undef UDI_CDC_API
|
||||
};
|
||||
|
||||
//! Add UDI with USB Descriptors FS & HS
|
||||
UDC_DESC_STORAGE udc_config_speed_t udc_config_fs[1] = { {
|
||||
.desc = (usb_conf_desc_t UDC_DESC_STORAGE*)&udc_desc_fs,
|
||||
.udi_apis = udi_apis,
|
||||
}};
|
||||
#ifdef USB_DEVICE_HS_SUPPORT
|
||||
UDC_DESC_STORAGE udc_config_speed_t udc_config_hs[1] = { {
|
||||
.desc = (usb_conf_desc_t UDC_DESC_STORAGE*)&udc_desc_hs,
|
||||
.udi_apis = udi_apis,
|
||||
}};
|
||||
#endif
|
||||
|
||||
//! Add all information about USB Device in global structure for UDC
|
||||
UDC_DESC_STORAGE udc_config_t udc_config = {
|
||||
.confdev_lsfs = &udc_device_desc,
|
||||
.conf_lsfs = udc_config_fs,
|
||||
#ifdef USB_DEVICE_HS_SUPPORT
|
||||
.confdev_hs = &udc_device_desc,
|
||||
.qualifier = &udc_device_qual,
|
||||
.conf_hs = udc_config_hs,
|
||||
#endif
|
||||
#ifdef USB_DEVICE_LPM_SUPPORT
|
||||
.conf_bos = &udc_device_lpm.bos,
|
||||
#else
|
||||
.conf_bos = NULL,
|
||||
#endif
|
||||
};
|
||||
|
||||
//@}
|
||||
//@}
|
||||
#endif
|
||||
#endif
|
||||
@ -50,6 +50,8 @@
|
||||
#include "udd.h"
|
||||
#include "udc_desc.h"
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
/**
|
||||
* \defgroup udi_group_desc Descriptors for a USB Device
|
||||
* composite
|
||||
@ -62,33 +64,33 @@
|
||||
//! USB Device Descriptor
|
||||
COMPILER_WORD_ALIGNED
|
||||
UDC_DESC_STORAGE usb_dev_desc_t udc_device_desc = {
|
||||
.bLength = sizeof(usb_dev_desc_t),
|
||||
.bDescriptorType = USB_DT_DEVICE,
|
||||
.bcdUSB = LE16(USB_V2_0),
|
||||
.bDeviceClass = 0,
|
||||
.bDeviceSubClass = 0,
|
||||
.bDeviceProtocol = 0,
|
||||
.bMaxPacketSize0 = USB_DEVICE_EP_CTRL_SIZE,
|
||||
.idVendor = LE16(USB_DEVICE_VENDOR_ID),
|
||||
.idProduct = LE16(USB_DEVICE_PRODUCT_ID),
|
||||
.bcdDevice = LE16((USB_DEVICE_MAJOR_VERSION << 8)
|
||||
| USB_DEVICE_MINOR_VERSION),
|
||||
.bLength = sizeof(usb_dev_desc_t),
|
||||
.bDescriptorType = USB_DT_DEVICE,
|
||||
.bcdUSB = LE16(USB_V2_0),
|
||||
.bDeviceClass = 0,
|
||||
.bDeviceSubClass = 0,
|
||||
.bDeviceProtocol = 0,
|
||||
.bMaxPacketSize0 = USB_DEVICE_EP_CTRL_SIZE,
|
||||
.idVendor = LE16(USB_DEVICE_VENDOR_ID),
|
||||
.idProduct = LE16(USB_DEVICE_PRODUCT_ID),
|
||||
.bcdDevice = LE16((USB_DEVICE_MAJOR_VERSION << 8)
|
||||
| USB_DEVICE_MINOR_VERSION),
|
||||
#ifdef USB_DEVICE_MANUFACTURE_NAME
|
||||
.iManufacturer = 1,
|
||||
.iManufacturer = 1,
|
||||
#else
|
||||
.iManufacturer = 0, // No manufacture string
|
||||
.iManufacturer = 0, // No manufacture string
|
||||
#endif
|
||||
#ifdef USB_DEVICE_PRODUCT_NAME
|
||||
.iProduct = 2,
|
||||
.iProduct = 2,
|
||||
#else
|
||||
.iProduct = 0, // No product string
|
||||
.iProduct = 0, // No product string
|
||||
#endif
|
||||
#if (defined USB_DEVICE_SERIAL_NAME || defined USB_DEVICE_GET_SERIAL_NAME_POINTER)
|
||||
.iSerialNumber = 3,
|
||||
.iSerialNumber = 3,
|
||||
#else
|
||||
.iSerialNumber = 0, // No serial string
|
||||
.iSerialNumber = 0, // No serial string
|
||||
#endif
|
||||
.bNumConfigurations = 1
|
||||
.bNumConfigurations = 1
|
||||
};
|
||||
|
||||
|
||||
@ -96,52 +98,52 @@ UDC_DESC_STORAGE usb_dev_desc_t udc_device_desc = {
|
||||
//! USB Device Qualifier Descriptor for HS
|
||||
COMPILER_WORD_ALIGNED
|
||||
UDC_DESC_STORAGE usb_dev_qual_desc_t udc_device_qual = {
|
||||
.bLength = sizeof(usb_dev_qual_desc_t),
|
||||
.bDescriptorType = USB_DT_DEVICE_QUALIFIER,
|
||||
.bcdUSB = LE16(USB_V2_0),
|
||||
.bDeviceClass = 0,
|
||||
.bDeviceSubClass = 0,
|
||||
.bDeviceProtocol = 0,
|
||||
.bMaxPacketSize0 = USB_DEVICE_EP_CTRL_SIZE,
|
||||
.bNumConfigurations = 1
|
||||
.bLength = sizeof(usb_dev_qual_desc_t),
|
||||
.bDescriptorType = USB_DT_DEVICE_QUALIFIER,
|
||||
.bcdUSB = LE16(USB_V2_0),
|
||||
.bDeviceClass = 0,
|
||||
.bDeviceSubClass = 0,
|
||||
.bDeviceProtocol = 0,
|
||||
.bMaxPacketSize0 = USB_DEVICE_EP_CTRL_SIZE,
|
||||
.bNumConfigurations = 1
|
||||
};
|
||||
#endif
|
||||
|
||||
//! Structure for USB Device Configuration Descriptor
|
||||
COMPILER_PACK_SET(1)
|
||||
typedef struct {
|
||||
usb_conf_desc_t conf;
|
||||
UDI_COMPOSITE_DESC_T;
|
||||
usb_conf_desc_t conf;
|
||||
UDI_COMPOSITE_DESC_T;
|
||||
} udc_desc_t;
|
||||
COMPILER_PACK_RESET()
|
||||
|
||||
//! USB Device Configuration Descriptor filled for FS
|
||||
COMPILER_WORD_ALIGNED
|
||||
UDC_DESC_STORAGE udc_desc_t udc_desc_fs = {
|
||||
.conf.bLength = sizeof(usb_conf_desc_t),
|
||||
.conf.bDescriptorType = USB_DT_CONFIGURATION,
|
||||
.conf.wTotalLength = LE16(sizeof(udc_desc_t)),
|
||||
.conf.bNumInterfaces = USB_DEVICE_NB_INTERFACE,
|
||||
.conf.bConfigurationValue = 1,
|
||||
.conf.iConfiguration = 0,
|
||||
.conf.bmAttributes = USB_CONFIG_ATTR_MUST_SET | USB_DEVICE_ATTR,
|
||||
.conf.bMaxPower = USB_CONFIG_MAX_POWER(USB_DEVICE_POWER),
|
||||
UDI_COMPOSITE_DESC_FS
|
||||
.conf.bLength = sizeof(usb_conf_desc_t),
|
||||
.conf.bDescriptorType = USB_DT_CONFIGURATION,
|
||||
.conf.wTotalLength = LE16(sizeof(udc_desc_t)),
|
||||
.conf.bNumInterfaces = USB_DEVICE_NB_INTERFACE,
|
||||
.conf.bConfigurationValue = 1,
|
||||
.conf.iConfiguration = 0,
|
||||
.conf.bmAttributes = USB_CONFIG_ATTR_MUST_SET | USB_DEVICE_ATTR,
|
||||
.conf.bMaxPower = USB_CONFIG_MAX_POWER(USB_DEVICE_POWER),
|
||||
UDI_COMPOSITE_DESC_FS
|
||||
};
|
||||
|
||||
#ifdef USB_DEVICE_HS_SUPPORT
|
||||
//! USB Device Configuration Descriptor filled for HS
|
||||
COMPILER_WORD_ALIGNED
|
||||
UDC_DESC_STORAGE udc_desc_t udc_desc_hs = {
|
||||
.conf.bLength = sizeof(usb_conf_desc_t),
|
||||
.conf.bDescriptorType = USB_DT_CONFIGURATION,
|
||||
.conf.wTotalLength = LE16(sizeof(udc_desc_t)),
|
||||
.conf.bNumInterfaces = USB_DEVICE_NB_INTERFACE,
|
||||
.conf.bConfigurationValue = 1,
|
||||
.conf.iConfiguration = 0,
|
||||
.conf.bmAttributes = USB_CONFIG_ATTR_MUST_SET | USB_DEVICE_ATTR,
|
||||
.conf.bMaxPower = USB_CONFIG_MAX_POWER(USB_DEVICE_POWER),
|
||||
UDI_COMPOSITE_DESC_HS
|
||||
.conf.bLength = sizeof(usb_conf_desc_t),
|
||||
.conf.bDescriptorType = USB_DT_CONFIGURATION,
|
||||
.conf.wTotalLength = LE16(sizeof(udc_desc_t)),
|
||||
.conf.bNumInterfaces = USB_DEVICE_NB_INTERFACE,
|
||||
.conf.bConfigurationValue = 1,
|
||||
.conf.iConfiguration = 0,
|
||||
.conf.bmAttributes = USB_CONFIG_ATTR_MUST_SET | USB_DEVICE_ATTR,
|
||||
.conf.bMaxPower = USB_CONFIG_MAX_POWER(USB_DEVICE_POWER),
|
||||
UDI_COMPOSITE_DESC_HS
|
||||
};
|
||||
#endif
|
||||
|
||||
@ -153,31 +155,31 @@ UDC_DESC_STORAGE udc_desc_t udc_desc_hs = {
|
||||
|
||||
//! Associate an UDI for each USB interface
|
||||
UDC_DESC_STORAGE udi_api_t *udi_apis[USB_DEVICE_NB_INTERFACE] = {
|
||||
UDI_COMPOSITE_API
|
||||
UDI_COMPOSITE_API
|
||||
};
|
||||
|
||||
//! Add UDI with USB Descriptors FS
|
||||
UDC_DESC_STORAGE udc_config_speed_t udc_config_lsfs[1] = {{
|
||||
.desc = (usb_conf_desc_t UDC_DESC_STORAGE*)&udc_desc_fs,
|
||||
.udi_apis = udi_apis,
|
||||
.desc = (usb_conf_desc_t UDC_DESC_STORAGE*)&udc_desc_fs,
|
||||
.udi_apis = udi_apis,
|
||||
}};
|
||||
|
||||
#ifdef USB_DEVICE_HS_SUPPORT
|
||||
//! Add UDI with USB Descriptors HS
|
||||
UDC_DESC_STORAGE udc_config_speed_t udc_config_hs[1] = {{
|
||||
.desc = (usb_conf_desc_t UDC_DESC_STORAGE*)&udc_desc_hs,
|
||||
.udi_apis = udi_apis,
|
||||
.desc = (usb_conf_desc_t UDC_DESC_STORAGE*)&udc_desc_hs,
|
||||
.udi_apis = udi_apis,
|
||||
}};
|
||||
#endif
|
||||
|
||||
//! Add all information about USB Device in global structure for UDC
|
||||
UDC_DESC_STORAGE udc_config_t udc_config = {
|
||||
.confdev_lsfs = &udc_device_desc,
|
||||
.conf_lsfs = udc_config_lsfs,
|
||||
.confdev_lsfs = &udc_device_desc,
|
||||
.conf_lsfs = udc_config_lsfs,
|
||||
#ifdef USB_DEVICE_HS_SUPPORT
|
||||
.confdev_hs = &udc_device_desc,
|
||||
.qualifier = &udc_device_qual,
|
||||
.conf_hs = udc_config_hs,
|
||||
.confdev_hs = &udc_device_desc,
|
||||
.qualifier = &udc_device_qual,
|
||||
.conf_hs = udc_config_hs,
|
||||
#endif
|
||||
};
|
||||
|
||||
@ -185,4 +187,5 @@ UDC_DESC_STORAGE udc_config_t udc_config = {
|
||||
/**INDENT-ON**/
|
||||
//@}
|
||||
|
||||
#endif
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
@ -50,24 +50,30 @@
|
||||
#include <Arduino.h>
|
||||
#include <Reset.h>
|
||||
|
||||
static volatile bool main_b_msc_enable = false;
|
||||
#if ENABLED(SDSUPPORT)
|
||||
static volatile bool main_b_msc_enable = false;
|
||||
#endif
|
||||
static volatile bool main_b_cdc_enable = false;
|
||||
static volatile bool main_b_dtr_active = false;
|
||||
|
||||
void HAL_idletask(void) {
|
||||
// Attend SD card access from the USB MSD -- Prioritize access to improve speed
|
||||
int delay = 2;
|
||||
while (main_b_msc_enable && --delay > 0) {
|
||||
if (udi_msc_process_trans()) delay = 10000;
|
||||
#if ENABLED(SDSUPPORT)
|
||||
// Attend SD card access from the USB MSD -- Prioritize access to improve speed
|
||||
int delay = 2;
|
||||
while (main_b_msc_enable && --delay > 0) {
|
||||
if (udi_msc_process_trans()) delay = 10000;
|
||||
|
||||
// Reset the watchdog, just to be sure
|
||||
REG_WDT_CR = WDT_CR_WDRSTT | WDT_CR_KEY(0xA5);
|
||||
}
|
||||
// Reset the watchdog, just to be sure
|
||||
REG_WDT_CR = WDT_CR_WDRSTT | WDT_CR_KEY(0xA5);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
bool usb_task_msc_enable(void) { return ((main_b_msc_enable = true)); }
|
||||
void usb_task_msc_disable(void) { main_b_msc_enable = false; }
|
||||
bool usb_task_msc_isenabled(void) { return main_b_msc_enable; }
|
||||
#if ENABLED(SDSUPPORT)
|
||||
bool usb_task_msc_enable(void) { return ((main_b_msc_enable = true)); }
|
||||
void usb_task_msc_disable(void) { main_b_msc_enable = false; }
|
||||
bool usb_task_msc_isenabled(void) { return main_b_msc_enable; }
|
||||
#endif
|
||||
|
||||
bool usb_task_cdc_enable(const uint8_t port) { return ((main_b_cdc_enable = true)); }
|
||||
void usb_task_cdc_disable(const uint8_t port) { main_b_cdc_enable = false; main_b_dtr_active = false; }
|
||||
@ -192,11 +198,17 @@ static USB_MicrosoftExtendedPropertiesDescriptor microsoft_extended_properties_d
|
||||
bool usb_task_extra_string(void) {
|
||||
static uint8_t udi_msft_magic[] = "MSFT100\xEE";
|
||||
static uint8_t udi_cdc_name[] = "CDC interface";
|
||||
static uint8_t udi_msc_name[] = "MSC interface";
|
||||
#if ENABLED(SDSUPPORT)
|
||||
static uint8_t udi_msc_name[] = "MSC interface";
|
||||
#endif
|
||||
|
||||
struct extra_strings_desc_t {
|
||||
usb_str_desc_t header;
|
||||
le16_t string[Max(Max(sizeof(udi_cdc_name) - 1, sizeof(udi_msc_name) - 1), sizeof(udi_msft_magic) - 1)];
|
||||
#if ENABLED(SDSUPPORT)
|
||||
le16_t string[Max(Max(sizeof(udi_cdc_name) - 1, sizeof(udi_msc_name) - 1), sizeof(udi_msft_magic) - 1)];
|
||||
#else
|
||||
le16_t string[Max(sizeof(udi_cdc_name) - 1, sizeof(udi_msft_magic) - 1)];
|
||||
#endif
|
||||
};
|
||||
static UDC_DESC_STORAGE struct extra_strings_desc_t extra_strings_desc = {
|
||||
.header.bDescriptorType = USB_DT_STRING
|
||||
@ -211,10 +223,12 @@ bool usb_task_extra_string(void) {
|
||||
str_lgt = sizeof(udi_cdc_name) - 1;
|
||||
str = udi_cdc_name;
|
||||
break;
|
||||
case UDI_MSC_STRING_ID:
|
||||
str_lgt = sizeof(udi_msc_name) - 1;
|
||||
str = udi_msc_name;
|
||||
break;
|
||||
#if ENABLED(SDSUPPORT)
|
||||
case UDI_MSC_STRING_ID:
|
||||
str_lgt = sizeof(udi_msc_name) - 1;
|
||||
str = udi_msc_name;
|
||||
break;
|
||||
#endif
|
||||
case 0xEE:
|
||||
str_lgt = sizeof(udi_msft_magic) - 1;
|
||||
str = udi_msft_magic;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user