From bfdd14be4fcf7c5e7c8f83444a9d8cb570df8340 Mon Sep 17 00:00:00 2001 From: Thomas Karl Pietrowski Date: Wed, 28 Mar 2018 04:06:14 +0200 Subject: [PATCH] bq Hephestos2: Allow bed leveling (#10234) * Increases the offset, needed to allow the nozzle to touch the bed * By default uses an offset of -4. This one is minimally far way from the buildplate and therefore only fine-tuning is needed to set the correct distance. --- .../example_configurations/BQ/Hephestos_2/Configuration.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h index fb7514dc07..d9f9416139 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h @@ -700,7 +700,7 @@ */ #define X_PROBE_OFFSET_FROM_EXTRUDER 34 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -4 // Z offset: -below +above [the nozzle] // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -738,8 +738,8 @@ //#define Z_AFTER_PROBING 2 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -2 -#define Z_PROBE_OFFSET_RANGE_MAX 0 +#define Z_PROBE_OFFSET_RANGE_MIN -5.5 +#define Z_PROBE_OFFSET_RANGE_MAX -3 // Enable the M48 repeatability test to test probe accuracy #define Z_MIN_PROBE_REPEATABILITY_TEST