diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 2e95701c2d..bfc7b0d2f2 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -1111,6 +1111,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h
index 69157810a7..482fd6ab50 100644
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h
@@ -1124,6 +1124,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h
index 282b0a9add..e9daa256eb 100644
--- a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h
+++ b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h
@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Anet/A2plus/Configuration.h b/Marlin/example_configurations/Anet/A2plus/Configuration.h
index 67e22cfe9e..ffad253115 100644
--- a/Marlin/example_configurations/Anet/A2plus/Configuration.h
+++ b/Marlin/example_configurations/Anet/A2plus/Configuration.h
@@ -1179,6 +1179,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Anet/A6/Configuration.h b/Marlin/example_configurations/Anet/A6/Configuration.h
index 48afa9b8b0..b2514e2baf 100644
--- a/Marlin/example_configurations/Anet/A6/Configuration.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration.h
@@ -1243,6 +1243,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Anet/A8/Configuration.h b/Marlin/example_configurations/Anet/A8/Configuration.h
index 1b7a876c2a..1c261a8ee2 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration.h
@@ -1117,6 +1117,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h
index 23ec2bda42..b2545b64a9 100644
--- a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h
+++ b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h
@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h b/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h
index 690ffc9fe3..52d9a533f1 100644
--- a/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h
+++ b/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h
@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration.h b/Marlin/example_configurations/BQ/Hephestos/Configuration.h
index d74e70bfaf..1f3caa0001 100644
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration.h
@@ -1092,6 +1092,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h
index e4cf80e126..b2f61b443f 100644
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h
@@ -1102,6 +1102,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration.h b/Marlin/example_configurations/BQ/WITBOX/Configuration.h
index d121193ff9..fba88c8b0a 100644
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration.h
@@ -1092,6 +1092,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h
index e2fd74b562..41b7960794 100644
--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@@ -1103,6 +1103,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration.h b/Marlin/example_configurations/Creality/CR-10/Configuration.h
index b147cf4bdf..465bd2f8e3 100755
--- a/Marlin/example_configurations/Creality/CR-10/Configuration.h
+++ b/Marlin/example_configurations/Creality/CR-10/Configuration.h
@@ -1114,6 +1114,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration.h b/Marlin/example_configurations/Creality/CR-10S/Configuration.h
index b531717d35..f9d085e7ad 100644
--- a/Marlin/example_configurations/Creality/CR-10S/Configuration.h
+++ b/Marlin/example_configurations/Creality/CR-10S/Configuration.h
@@ -1109,6 +1109,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Creality/CR-10mini/Configuration.h b/Marlin/example_configurations/Creality/CR-10mini/Configuration.h
index c109fd1721..c72fb4c9bc 100644
--- a/Marlin/example_configurations/Creality/CR-10mini/Configuration.h
+++ b/Marlin/example_configurations/Creality/CR-10mini/Configuration.h
@@ -1123,6 +1123,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Creality/CR-8/Configuration.h b/Marlin/example_configurations/Creality/CR-8/Configuration.h
index 3525a10dcc..8b77bf9222 100644
--- a/Marlin/example_configurations/Creality/CR-8/Configuration.h
+++ b/Marlin/example_configurations/Creality/CR-8/Configuration.h
@@ -1114,6 +1114,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Creality/Ender-2/Configuration.h b/Marlin/example_configurations/Creality/Ender-2/Configuration.h
index 1110e74204..0df7230bd8 100644
--- a/Marlin/example_configurations/Creality/Ender-2/Configuration.h
+++ b/Marlin/example_configurations/Creality/Ender-2/Configuration.h
@@ -1108,6 +1108,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Creality/Ender-3/Configuration.h b/Marlin/example_configurations/Creality/Ender-3/Configuration.h
index 2aca1e8284..6d1b866caf 100644
--- a/Marlin/example_configurations/Creality/Ender-3/Configuration.h
+++ b/Marlin/example_configurations/Creality/Ender-3/Configuration.h
@@ -1108,6 +1108,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Creality/Ender-4/Configuration.h b/Marlin/example_configurations/Creality/Ender-4/Configuration.h
index c525557807..3986ec1482 100644
--- a/Marlin/example_configurations/Creality/Ender-4/Configuration.h
+++ b/Marlin/example_configurations/Creality/Ender-4/Configuration.h
@@ -1114,6 +1114,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 6dd0658894..392b91ab70 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -1086,6 +1086,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h
index 4fc761aeeb..2892aef8e2 100644
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@@ -1086,6 +1086,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h
index f09bd997ab..9cd60c2ffd 100644
--- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h
+++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h
@@ -1110,6 +1110,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h
index 015129f8da..483c896274 100644
--- a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h
+++ b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h
@@ -1119,6 +1119,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h
index d997f76bcb..5babfdc77a 100644
--- a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index f838f8563f..585d962f4a 100644
--- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
+++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
@@ -1120,6 +1120,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index 3d071ad02c..0964b64c91 100644
--- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
+++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
@@ -1119,6 +1119,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration.h
index e47a104c98..d6c7280253 100644
--- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration.h	
+++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration.h	
@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration.h
index 111be839c0..97f92b5238 100644
--- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration.h	
+++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration.h	
@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h
index 68c434e0e3..ced591b918 100644
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h
@@ -1108,6 +1108,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/JGAurora/A5/Configuration.h b/Marlin/example_configurations/JGAurora/A5/Configuration.h
index 3c152e1700..c0e9059411 100644
--- a/Marlin/example_configurations/JGAurora/A5/Configuration.h
+++ b/Marlin/example_configurations/JGAurora/A5/Configuration.h
@@ -1115,6 +1115,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration.h b/Marlin/example_configurations/Malyan/M150/Configuration.h
index cf8897b15d..f9c6525221 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration.h
@@ -1132,6 +1132,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h
index b11a3dc1a1..de5a68a980 100644
--- a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h
+++ b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h
@@ -1108,6 +1108,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h
index 86ca7f4fc0..1eaf5eccc8 100644
--- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h
+++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h
@@ -1108,6 +1108,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h b/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h
index 6584098c50..b8b036657f 100644
--- a/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h
+++ b/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h
@@ -1153,6 +1153,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index 750e11375e..bba8a5fab8 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index b41d1e0e66..c9fb34ed3d 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -1102,6 +1102,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 9425e9a240..99c910d45b 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -1117,6 +1117,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Sanguinololu/Configuration.h b/Marlin/example_configurations/Sanguinololu/Configuration.h
index 1beddbc90b..a8f3953951 100644
--- a/Marlin/example_configurations/Sanguinololu/Configuration.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration.h
@@ -1135,6 +1135,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h
index 5367c9f1a0..d553b8018c 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration.h
@@ -1163,6 +1163,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Tronxy/X1/Configuration.h b/Marlin/example_configurations/Tronxy/X1/Configuration.h
index 2c2b314ba7..c76e7eff05 100644
--- a/Marlin/example_configurations/Tronxy/X1/Configuration.h
+++ b/Marlin/example_configurations/Tronxy/X1/Configuration.h
@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Tronxy/X3A/Configuration.h b/Marlin/example_configurations/Tronxy/X3A/Configuration.h
index 5aea54f768..08b0d31e18 100644
--- a/Marlin/example_configurations/Tronxy/X3A/Configuration.h
+++ b/Marlin/example_configurations/Tronxy/X3A/Configuration.h
@@ -1108,6 +1108,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Tronxy/X5S/Configuration.h b/Marlin/example_configurations/Tronxy/X5S/Configuration.h
index e34a5aee02..fbd5f03c40 100644
--- a/Marlin/example_configurations/Tronxy/X5S/Configuration.h
+++ b/Marlin/example_configurations/Tronxy/X5S/Configuration.h
@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Tronxy/XY100/Configuration.h b/Marlin/example_configurations/Tronxy/XY100/Configuration.h
index 09d623d802..d0115e319c 100644
--- a/Marlin/example_configurations/Tronxy/XY100/Configuration.h
+++ b/Marlin/example_configurations/Tronxy/XY100/Configuration.h
@@ -1115,6 +1115,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration.h b/Marlin/example_configurations/Velleman/K8200/Configuration.h
index 17c1282cd1..0432d93246 100644
--- a/Marlin/example_configurations/Velleman/K8200/Configuration.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration.h
@@ -1134,6 +1134,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Configuration.h
index e71916ed89..3739a11963 100644
--- a/Marlin/example_configurations/Velleman/K8400/Configuration.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration.h
@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h
index f5fb4e7ce2..0a5f98670b 100644
--- a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h
+++ b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h
@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h
index 51f349ea46..7309560e10 100644
--- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h	
+++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h	
@@ -1114,6 +1114,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 50fa169e85..2d978eef9b 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/delta/Anycubic/Kossel/Configuration.h b/Marlin/example_configurations/delta/Anycubic/Kossel/Configuration.h
index 068119466e..aa2eab463a 100644
--- a/Marlin/example_configurations/delta/Anycubic/Kossel/Configuration.h
+++ b/Marlin/example_configurations/delta/Anycubic/Kossel/Configuration.h
@@ -1302,6 +1302,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
index ae35dd5738..82e04c3679 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
@@ -1240,6 +1240,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h
index 30046380ae..8212d99a81 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h
@@ -1239,6 +1239,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
index eb268b6e1c..de6eabe5fb 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
@@ -1239,6 +1239,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h b/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h
index 9dade8f359..716f6c725b 100644
--- a/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h
+++ b/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h
@@ -1242,6 +1242,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index cdd3e713fe..86b3d87c30 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -1227,6 +1227,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 6e29ccb9c4..4b93eb3bae 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -1229,6 +1229,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index c9874d0d71..25f40ba679 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -1230,6 +1230,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index e59459e0cc..cb6f49fb6d 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -1230,6 +1230,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
index 259033856d..5c5c73655d 100644
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
@@ -1118,6 +1118,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/hangprinter/Configuration.h b/Marlin/example_configurations/hangprinter/Configuration.h
index 4e320298f7..fedebb2e5e 100644
--- a/Marlin/example_configurations/hangprinter/Configuration.h
+++ b/Marlin/example_configurations/hangprinter/Configuration.h
@@ -1275,6 +1275,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index d845442184..88e358a7d2 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -1107,6 +1107,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 448b0c3ebb..0a4e4f0107 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -1099,6 +1099,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/example_configurations/wt150/Configuration.h b/Marlin/example_configurations/wt150/Configuration.h
index 6a66cbc140..f5a0bc655d 100644
--- a/Marlin/example_configurations/wt150/Configuration.h
+++ b/Marlin/example_configurations/wt150/Configuration.h
@@ -1109,6 +1109,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index d1baea9113..f67de54e3c 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -1824,12 +1824,18 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
   #if ENABLED(LEVEL_BED_CORNERS)
 
+    #ifndef LEVEL_CORNERS_Z_HOP
+      #define LEVEL_CORNERS_Z_HOP 4.0
+    #endif
+
+    static_assert(LEVEL_CORNERS_Z_HOP >= 0, "LEVEL_CORNERS_Z_HOP must be >= 0. Please update your configuration.");
+
     /**
      * Level corners, starting in the front-left corner.
      */
     static int8_t bed_corner;
     void _lcd_goto_next_corner() {
-      line_to_z(4.0);
+      line_to_z(LEVEL_CORNERS_Z_HOP);
       switch (bed_corner) {
         case 0:
           current_position[X_AXIS] = X_MIN_BED + LEVEL_CORNERS_INSET;