diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 71a9211330..bb89bc14a3 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -1837,6 +1837,7 @@ #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + //#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build. #endif // diff --git a/Marlin/src/module/settings.cpp b/Marlin/src/module/settings.cpp index 8ccf773adc..a9c771240c 100644 --- a/Marlin/src/module/settings.cpp +++ b/Marlin/src/module/settings.cpp @@ -36,7 +36,7 @@ */ // Change EEPROM version if the structure changes -#define EEPROM_VERSION "V85" +#define EEPROM_VERSION "V86" #define EEPROM_OFFSET 100 // Check the integrity of data offsets. @@ -198,20 +198,32 @@ static const feedRate_t _DMF[] PROGMEM = DEFAULT_MAX_FEEDRATE; */ typedef struct SettingsDataStruct { char version[4]; // Vnn\0 + #if ENABLED(EEPROM_INIT_NOW) + uint32_t build_hash; // Unique build hash + #endif uint16_t crc; // Data Checksum // // DISTINCT_E_FACTORS // - uint8_t esteppers; // DISTINCT_AXES - LINEAR_AXES + uint8_t e_factors; // DISTINCT_AXES - LINEAR_AXES + // + // Planner settings + // planner_settings_t planner_settings; xyze_float_t planner_max_jerk; // M205 XYZE planner.max_jerk float planner_junction_deviation_mm; // M205 J planner.junction_deviation_mm + // + // Home Offset + // xyz_pos_t home_offset; // M206 XYZ / M665 TPZ + // + // Hotend Offset + // #if HAS_HOTEND_OFFSET xyz_pos_t hotend_offset[HOTENDS - 1]; // M218 XYZ #endif @@ -649,13 +661,24 @@ void MarlinSettings::postprocess() { const char version[4] = EEPROM_VERSION; + #if ENABLED(EEPROM_INIT_NOW) + constexpr uint32_t strhash32(const char *s, const uint32_t h=0) { + return *s ? strhash32(s + 1, ((h + *s) << (*s & 3)) ^ *s) : h; + } + constexpr uint32_t build_hash = strhash32(__DATE__ __TIME__); + #endif + bool MarlinSettings::eeprom_error, MarlinSettings::validating; int MarlinSettings::eeprom_index; uint16_t MarlinSettings::working_crc; bool MarlinSettings::size_error(const uint16_t size) { if (size != datasize()) { - DEBUG_ERROR_MSG("EEPROM datasize error."); + DEBUG_ERROR_MSG("EEPROM datasize error." + #if ENABLED(MARLIN_DEV_MODE) + " (Actual:", size, " Expected:", datasize(), ")" + #endif + ); return true; } return false; @@ -675,13 +698,17 @@ void MarlinSettings::postprocess() { // Write or Skip version. (Flash doesn't allow rewrite without erase.) TERN(FLASH_EEPROM_EMULATION, EEPROM_SKIP, EEPROM_WRITE)(ver); - EEPROM_SKIP(working_crc); // Skip the checksum slot + #if ENABLED(EEPROM_INIT_NOW) + EEPROM_SKIP(build_hash); // Skip the hash slot + #endif + + EEPROM_SKIP(working_crc); // Skip the checksum slot working_crc = 0; // clear before first "real data" - const uint8_t esteppers = COUNT(planner.settings.axis_steps_per_mm) - LINEAR_AXES; - _FIELD_TEST(esteppers); - EEPROM_WRITE(esteppers); + const uint8_t e_factors = DISTINCT_AXES - (LINEAR_AXES); + _FIELD_TEST(e_factors); + EEPROM_WRITE(e_factors); // // Planner Motion @@ -1494,6 +1521,9 @@ void MarlinSettings::postprocess() { eeprom_index = EEPROM_OFFSET; EEPROM_WRITE(version); + #if ENABLED(EEPROM_INIT_NOW) + EEPROM_WRITE(build_hash); + #endif EEPROM_WRITE(final_crc); // Report storage size @@ -1527,9 +1557,6 @@ void MarlinSettings::postprocess() { char stored_ver[4]; EEPROM_READ_ALWAYS(stored_ver); - uint16_t stored_crc; - EEPROM_READ_ALWAYS(stored_crc); - // Version has to match or defaults are used if (strncmp(version, stored_ver, 3) != 0) { if (stored_ver[3] != '\0') { @@ -1543,14 +1570,25 @@ void MarlinSettings::postprocess() { eeprom_error = true; } else { + + // Optionally reset on the first boot after flashing + #if ENABLED(EEPROM_INIT_NOW) + uint32_t stored_hash; + EEPROM_READ_ALWAYS(stored_hash); + if (stored_hash != build_hash) { EEPROM_FINISH(); return true; } + #endif + + uint16_t stored_crc; + EEPROM_READ_ALWAYS(stored_crc); + float dummyf = 0; working_crc = 0; // Init to 0. Accumulated by EEPROM_READ - _FIELD_TEST(esteppers); + _FIELD_TEST(e_factors); - // Number of esteppers may change - uint8_t esteppers; - EEPROM_READ_ALWAYS(esteppers); + // Number of e_factors may change + uint8_t e_factors; + EEPROM_READ_ALWAYS(e_factors); // // Planner Motion @@ -1558,16 +1596,16 @@ void MarlinSettings::postprocess() { { // Get only the number of E stepper parameters previously stored // Any steppers added later are set to their defaults - uint32_t tmp1[LINEAR_AXES + esteppers]; - float tmp2[LINEAR_AXES + esteppers]; - feedRate_t tmp3[LINEAR_AXES + esteppers]; + uint32_t tmp1[LINEAR_AXES + e_factors]; + float tmp2[LINEAR_AXES + e_factors]; + feedRate_t tmp3[LINEAR_AXES + e_factors]; EEPROM_READ((uint8_t *)tmp1, sizeof(tmp1)); // max_acceleration_mm_per_s2 EEPROM_READ(planner.settings.min_segment_time_us); EEPROM_READ((uint8_t *)tmp2, sizeof(tmp2)); // axis_steps_per_mm EEPROM_READ((uint8_t *)tmp3, sizeof(tmp3)); // max_feedrate_mm_s if (!validating) LOOP_DISTINCT_AXES(i) { - const bool in = (i < esteppers + LINEAR_AXES); + const bool in = (i < e_factors + LINEAR_AXES); planner.settings.max_acceleration_mm_per_s2[i] = in ? tmp1[i] : pgm_read_dword(&_DMA[ALIM(i, _DMA)]); planner.settings.axis_steps_per_mm[i] = in ? tmp2[i] : pgm_read_float(&_DASU[ALIM(i, _DASU)]); planner.settings.max_feedrate_mm_s[i] = in ? tmp3[i] : pgm_read_float(&_DMF[ALIM(i, _DMF)]); @@ -2496,7 +2534,7 @@ void MarlinSettings::postprocess() { return success; } reset(); - #if ENABLED(EEPROM_AUTO_INIT) + #if EITHER(EEPROM_AUTO_INIT, EEPROM_INIT_NOW) (void)save(); SERIAL_ECHO_MSG("EEPROM Initialized"); #endif diff --git a/buildroot/share/PlatformIO/scripts/preflight-checks.py b/buildroot/share/PlatformIO/scripts/preflight-checks.py index 1837a7580d..9f38ffe8bf 100644 --- a/buildroot/share/PlatformIO/scripts/preflight-checks.py +++ b/buildroot/share/PlatformIO/scripts/preflight-checks.py @@ -81,10 +81,19 @@ if pioutil.is_pio_build(): # # Give warnings on every build # - warnfile = os.path.join(env['PROJECT_BUILD_DIR'], build_env, "src", "src", "inc", "Warnings.cpp.o") + srcpath = os.path.join(env['PROJECT_BUILD_DIR'], build_env, "src", "src") + warnfile = os.path.join(srcpath, "inc", "Warnings.cpp.o") if os.path.exists(warnfile): os.remove(warnfile) + # + # Rebuild 'settings.cpp' for EEPROM_INIT_NOW + # + if 'EEPROM_INIT_NOW' in env['MARLIN_FEATURES']: + setfile = os.path.join(srcpath, "module", "settings.cpp.o") + if os.path.exists(setfile): + os.remove(setfile) + # # Check for old files indicating an entangled Marlin (mixing old and new code) #