diff --git a/Marlin/src/feature/pause.cpp b/Marlin/src/feature/pause.cpp
index 83cb66fae4..83d149fa09 100644
--- a/Marlin/src/feature/pause.cpp
+++ b/Marlin/src/feature/pause.cpp
@@ -410,7 +410,6 @@ bool pause_print(const_float_t retract, const xyz_pos_t &park_point, const bool
#endif
TERN_(HOST_PROMPT_SUPPORT, hostui.prompt_open(PROMPT_INFO, F("Pause"), FPSTR(DISMISS_STR)));
- TERN_(DWIN_LCD_PROUI, DWIN_Print_Pause());
// Indicate that the printer is paused
++did_pause_print;
@@ -461,6 +460,7 @@ bool pause_print(const_float_t retract, const xyz_pos_t &park_point, const bool
// If axes don't need to home then the nozzle can park
if (do_park) nozzle.park(0, park_point); // Park the nozzle by doing a Minimum Z Raise followed by an XY Move
+ TERN_(DWIN_LCD_PROUI, if (!do_park) ui.set_status(GET_TEXT_F(MSG_PARK_FAILED)));
#if ENABLED(DUAL_X_CARRIAGE)
const int8_t saved_ext = active_extruder;
@@ -710,13 +710,8 @@ void resume_print(const_float_t slow_load_length/*=0*/, const_float_t fast_load_
TERN_(HAS_FILAMENT_SENSOR, runout.reset());
- #if ENABLED(DWIN_LCD_PROUI)
- DWIN_Print_Resume();
- HMI_ReturnScreen();
- #else
- ui.reset_status();
- ui.return_to_status();
- #endif
+ ui.reset_status();
+ ui.return_to_status();
}
#endif // ADVANCED_PAUSE_FEATURE
diff --git a/Marlin/src/gcode/config/M302.cpp b/Marlin/src/gcode/config/M302.cpp
index 9f4d569d7b..12408c8987 100644
--- a/Marlin/src/gcode/config/M302.cpp
+++ b/Marlin/src/gcode/config/M302.cpp
@@ -28,7 +28,7 @@
#include "../../module/temperature.h"
#if ENABLED(DWIN_LCD_PROUI)
- #include "../../lcd/e3v2/proui/dwin_defines.h"
+ #include "../../lcd/e3v2/proui/dwin.h"
#endif
/**
diff --git a/Marlin/src/gcode/lcd/M145.cpp b/Marlin/src/gcode/lcd/M145.cpp
index 8dbe2fb07e..942d20afd2 100644
--- a/Marlin/src/gcode/lcd/M145.cpp
+++ b/Marlin/src/gcode/lcd/M145.cpp
@@ -47,7 +47,7 @@ void GcodeSuite::M145() {
preheat_t &mat = ui.material_preset[material];
#if HAS_HOTEND
if (parser.seenval('H'))
- mat.hotend_temp = constrain(parser.value_int(), EXTRUDE_MINTEMP, thermalManager.hotend_max_target(0));
+ mat.hotend_temp = constrain(parser.value_int(), thermalManager.extrude_min_temp, thermalManager.hotend_max_target(0));
#endif
#if HAS_HEATED_BED
if (parser.seenval('B'))
diff --git a/Marlin/src/gcode/sd/M1001.cpp b/Marlin/src/gcode/sd/M1001.cpp
index f404358862..c7728a5a47 100644
--- a/Marlin/src/gcode/sd/M1001.cpp
+++ b/Marlin/src/gcode/sd/M1001.cpp
@@ -109,7 +109,6 @@ void GcodeSuite::M1001() {
#endif
TERN_(EXTENSIBLE_UI, ExtUI::onPrintDone());
- TERN_(DWIN_LCD_PROUI, DWIN_Print_Finished());
// Re-select the last printed file in the UI
TERN_(SD_REPRINT_LAST_SELECTED_FILE, ui.reselect_last_file());
diff --git a/Marlin/src/gcode/sd/M524.cpp b/Marlin/src/gcode/sd/M524.cpp
index 001a1e1842..f2b9274223 100644
--- a/Marlin/src/gcode/sd/M524.cpp
+++ b/Marlin/src/gcode/sd/M524.cpp
@@ -28,7 +28,7 @@
#include "../../sd/cardreader.h"
#if ENABLED(DWIN_LCD_PROUI)
- #include "../../lcd/e3v2/proui/dwin.h"
+ #include "../../lcd/marlinui.h"
#endif
/**
@@ -38,7 +38,7 @@ void GcodeSuite::M524() {
#if ENABLED(DWIN_LCD_PROUI)
- HMI_flag.abort_flag = true; // The LCD will handle it
+ ui.abort_print();
#else
diff --git a/Marlin/src/gcode/stats/M75-M78.cpp b/Marlin/src/gcode/stats/M75-M78.cpp
index 0ed1e66930..2ff04797eb 100644
--- a/Marlin/src/gcode/stats/M75-M78.cpp
+++ b/Marlin/src/gcode/stats/M75-M78.cpp
@@ -39,7 +39,6 @@
void GcodeSuite::M75() {
startOrResumeJob();
#if ENABLED(DWIN_LCD_PROUI)
- DWIN_Print_Started(false);
if (!IS_SD_PRINTING()) DWIN_Print_Header(parser.string_arg && parser.string_arg[0] ? parser.string_arg : GET_TEXT(MSG_HOST_START_PRINT));
#endif
}
@@ -48,9 +47,8 @@ void GcodeSuite::M75() {
* M76: Pause print timer
*/
void GcodeSuite::M76() {
- print_job_timer.pause();
+ TERN(DWIN_LCD_PROUI, ui.pause_print(), print_job_timer.pause());
TERN_(HOST_PAUSE_M76, hostui.pause());
- TERN_(DWIN_LCD_PROUI, DWIN_Print_Pause());
}
/**
@@ -58,7 +56,6 @@ void GcodeSuite::M76() {
*/
void GcodeSuite::M77() {
print_job_timer.stop();
- TERN_(DWIN_LCD_PROUI, DWIN_Print_Finished());
}
#if ENABLED(PRINTCOUNTER)
diff --git a/Marlin/src/gcode/temp/M303.cpp b/Marlin/src/gcode/temp/M303.cpp
index a4d514c733..449748abf1 100644
--- a/Marlin/src/gcode/temp/M303.cpp
+++ b/Marlin/src/gcode/temp/M303.cpp
@@ -86,7 +86,7 @@ void GcodeSuite::M303() {
#if ENABLED(DWIN_LCD_PROUI)
if (seenC) HMI_data.PidCycles = c;
- if (seenS) { if (hid == H_BED) HMI_data.BedPidT = temp; else HMI_data.HotendPidT = temp; }
+ if (seenS) { if (hid == H_BED) HMI_data.BedPidT = temp; else TERN_(PIDTEMP, HMI_data.HotendPidT = temp); }
#endif
#if DISABLED(BUSY_WHILE_HEATING)
diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
index 18a28130eb..b9bcb4d0d2 100644
--- a/Marlin/src/inc/Conditionals_post.h
+++ b/Marlin/src/inc/Conditionals_post.h
@@ -2472,6 +2472,7 @@
#define BED_MAX_TARGET (BED_MAXTEMP - (BED_OVERSHOOT))
#else
#undef PIDTEMPBED
+ #undef PREHEAT_BEFORE_LEVELING
#endif
#if HAS_TEMP_COOLER && PIN_EXISTS(COOLER)
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index aabb93e8f2..d82313461a 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -940,8 +940,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "SD_REPRINT_LAST_SELECTED_FILE currently requires a Marlin-native LCD menu."
#endif
-#if ANY(HAS_MARLINUI_MENU, TOUCH_UI_FTDI_EVE, EXTENSIBLE_UI) && !defined(MANUAL_FEEDRATE)
- #error "MANUAL_FEEDRATE is required for MarlinUI, ExtUI, or FTDI EVE Touch UI."
+#if ANY(HAS_MARLINUI_MENU, TOUCH_UI_FTDI_EVE, EXTENSIBLE_UI, DWIN_LCD_PROUI) && !defined(MANUAL_FEEDRATE)
+ #error "MANUAL_FEEDRATE is required for ProUI, MarlinUI, ExtUI, or FTDI EVE Touch UI."
#endif
/**
diff --git a/Marlin/src/lcd/e3v2/proui/bedlevel_tools.cpp b/Marlin/src/lcd/e3v2/proui/bedlevel_tools.cpp
index e967c26198..c4f43eab10 100644
--- a/Marlin/src/lcd/e3v2/proui/bedlevel_tools.cpp
+++ b/Marlin/src/lcd/e3v2/proui/bedlevel_tools.cpp
@@ -19,27 +19,37 @@
* along with this program. If not, see .
*
*/
-
+
/**
* Bed Level Tools for Pro UI
* Extended by: Miguel A. Risco-Castillo (MRISCOC)
- * Version: 2.0.0
- * Date: 2022/05/23
- *
+ * Version: 2.1.0
+ * Date: 2022/08/27
+ *
* Based on the original work of: Henri-J-Norden
* https://github.com/Jyers/Marlin/pull/126
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
*/
#include "../../../inc/MarlinConfigPre.h"
-#include "bedlevel_tools.h"
#if BOTH(DWIN_LCD_PROUI, HAS_LEVELING)
#include "../../marlinui.h"
#include "../../../core/types.h"
-#include "dwin.h"
-#include "dwinui.h"
-#include "dwin_popup.h"
#include "../../../feature/bedlevel/bedlevel.h"
#include "../../../module/probe.h"
#include "../../../gcode/gcode.h"
@@ -48,9 +58,14 @@
#include "../../../libs/least_squares_fit.h"
#include "../../../libs/vector_3.h"
-BedLevelToolsClass BedLevelTools;
+#include "dwin.h"
+#include "dwinui.h"
+#include "dwin_popup.h"
+#include "bedlevel_tools.h"
-#if USE_UBL_VIEWER
+BedLevelToolsClass bedLevelTools;
+
+#if ENABLED(USE_UBL_VIEWER)
bool BedLevelToolsClass::viewer_asymmetric_range = false;
bool BedLevelToolsClass::viewer_print_value = false;
#endif
@@ -153,26 +168,30 @@ void BedLevelToolsClass::manual_move(const uint8_t mesh_x, const uint8_t mesh_y,
}
}
+// Move / Probe methods. As examples, not yet used.
void BedLevelToolsClass::MoveToXYZ() {
- BedLevelTools.goto_mesh_value = true;
- BedLevelTools.manual_move(BedLevelTools.mesh_x, BedLevelTools.mesh_y, false);
+ bedLevelTools.goto_mesh_value = true;
+ bedLevelTools.manual_move(bedLevelTools.mesh_x, bedLevelTools.mesh_y, false);
}
void BedLevelToolsClass::MoveToXY() {
- BedLevelTools.goto_mesh_value = false;
- BedLevelTools.manual_move(BedLevelTools.mesh_x, BedLevelTools.mesh_y, false);
+ bedLevelTools.goto_mesh_value = false;
+ bedLevelTools.manual_move(bedLevelTools.mesh_x, bedLevelTools.mesh_y, false);
}
void BedLevelToolsClass::MoveToZ() {
- BedLevelTools.goto_mesh_value = true;
- BedLevelTools.manual_move(BedLevelTools.mesh_x, BedLevelTools.mesh_y, true);
+ bedLevelTools.goto_mesh_value = true;
+ bedLevelTools.manual_move(bedLevelTools.mesh_x, bedLevelTools.mesh_y, true);
}
void BedLevelToolsClass::ProbeXY() {
- sprintf_P(cmd, PSTR("G30X%sY%s"),
- dtostrf(bedlevel.get_mesh_x(BedLevelTools.mesh_x), 1, 2, str_1),
- dtostrf(bedlevel.get_mesh_y(BedLevelTools.mesh_y), 1, 2, str_2)
+ const uint16_t Clear = Z_CLEARANCE_DEPLOY_PROBE;
+ sprintf_P(cmd, PSTR("G0Z%i\nG30X%sY%s"),
+ Clear,
+ dtostrf(bedlevel.get_mesh_x(bedLevelTools.mesh_x), 1, 2, str_1),
+ dtostrf(bedlevel.get_mesh_y(bedLevelTools.mesh_y), 1, 2, str_2)
);
gcode.process_subcommands_now(cmd);
}
+// Accessors
float BedLevelToolsClass::get_max_value() {
float max = __FLT_MAX__ * -1;
GRID_LOOP(x, y) {
@@ -191,18 +210,16 @@ float BedLevelToolsClass::get_min_value() {
return min;
}
+// Return 'true' if mesh is good and within LCD limits
bool BedLevelToolsClass::meshvalidate() {
- float min = __FLT_MAX__, max = __FLT_MAX__ * -1;
-
GRID_LOOP(x, y) {
- if (isnan(bedlevel.z_values[x][y])) return false;
- if (bedlevel.z_values[x][y] < min) min = bedlevel.z_values[x][y];
- if (bedlevel.z_values[x][y] > max) max = bedlevel.z_values[x][y];
+ const float v = bedlevel.z_values[x][y];
+ if (isnan(v) || !WITHIN(v, UBL_Z_OFFSET_MIN, UBL_Z_OFFSET_MAX)) return false;
}
- return WITHIN(max, MESH_Z_OFFSET_MIN, MESH_Z_OFFSET_MAX);
+ return true;
}
-#if USE_UBL_VIEWER
+#if ENABLED(USE_UBL_VIEWER)
void BedLevelToolsClass::Draw_Bed_Mesh(int16_t selected /*= -1*/, uint8_t gridline_width /*= 1*/, uint16_t padding_x /*= 8*/, uint16_t padding_y_top /*= 40 + 53 - 7*/) {
drawing_mesh = true;
diff --git a/Marlin/src/lcd/e3v2/proui/bedlevel_tools.h b/Marlin/src/lcd/e3v2/proui/bedlevel_tools.h
index 9373d593f9..b476cb38b6 100644
--- a/Marlin/src/lcd/e3v2/proui/bedlevel_tools.h
+++ b/Marlin/src/lcd/e3v2/proui/bedlevel_tools.h
@@ -23,27 +23,38 @@
/**
* Bed Level Tools for Pro UI
* Extended by: Miguel A. Risco-Castillo (MRISCOC)
- * Version: 2.0.0
- * Date: 2022/05/23
- *
+ * Version: 2.1.0
+ * Date: 2022/08/27
+ *
* Based on the original work of: Henri-J-Norden
* https://github.com/Jyers/Marlin/pull/126
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
*/
-
#pragma once
#include "../../../inc/MarlinConfigPre.h"
-#if ENABLED(AUTO_BED_LEVELING_UBL)
- //#define USE_UBL_VIEWER 1
-#endif
+//#define USE_UBL_VIEWER 1
-#define MESH_Z_OFFSET_MIN -3.0
-#define MESH_Z_OFFSET_MAX 3.0
+#define UBL_Z_OFFSET_MIN -3.0
+#define UBL_Z_OFFSET_MAX 3.0
class BedLevelToolsClass {
public:
- #if USE_UBL_VIEWER
+ #if ENABLED(USE_UBL_VIEWER)
static bool viewer_asymmetric_range;
static bool viewer_print_value;
#endif
@@ -66,12 +77,10 @@ public:
static float get_max_value();
static float get_min_value();
static bool meshvalidate();
- #if USE_UBL_VIEWER
+ #if ENABLED(USE_UBL_VIEWER)
static void Draw_Bed_Mesh(int16_t selected = -1, uint8_t gridline_width = 1, uint16_t padding_x = 8, uint16_t padding_y_top = 40 + 53 - 7);
static void Set_Mesh_Viewer_Status();
#endif
};
-extern BedLevelToolsClass BedLevelTools;
-
-void Goto_MeshViewer();
+extern BedLevelToolsClass bedLevelTools;
diff --git a/Marlin/src/lcd/e3v2/proui/dwin.cpp b/Marlin/src/lcd/e3v2/proui/dwin.cpp
index fcceb2d52d..a5570026d0 100644
--- a/Marlin/src/lcd/e3v2/proui/dwin.cpp
+++ b/Marlin/src/lcd/e3v2/proui/dwin.cpp
@@ -23,8 +23,8 @@
/**
* DWIN Enhanced implementation for PRO UI
* Author: Miguel A. Risco-Castillo (MRISCOC)
- * Version: 3.17.2
- * Date: 2022/04/08
+ * Version: 3.21.2
+ * Date: 2022/12/02
*/
#include "../../../inc/MarlinConfig.h"
@@ -62,10 +62,6 @@
#warning "MESH_EDIT_MENU is recommended with ProUI."
#endif
-#include "dwin.h"
-#include "menus.h"
-#include "dwin_popup.h"
-
#include "../../fontutils.h"
#include "../../marlinui.h"
@@ -78,6 +74,7 @@
#include "../../../module/temperature.h"
#include "../../../module/printcounter.h"
#include "../../../module/motion.h"
+#include "../../../module/stepper.h"
#include "../../../module/planner.h"
#include "../../../gcode/gcode.h"
@@ -126,22 +123,6 @@
#include "../../../feature/powerloss.h"
#endif
-#if HAS_ESDIAG
- #include "endstop_diag.h"
-#endif
-
-#if HAS_PIDPLOT
- #include "plot.h"
-#endif
-
-#if HAS_GCODE_PREVIEW
- #include "gcode_preview.h"
-#endif
-
-#if HAS_MESH
- #include "meshviewer.h"
-#endif
-
#if ENABLED(PRINTCOUNTER)
#include "printstats.h"
#endif
@@ -154,18 +135,40 @@
#include "../../../feature/leds/leds.h"
#endif
+#include "dwin.h"
+#include "dwinui.h"
+#include "menus.h"
+#include "dwin_popup.h"
+
+#if HAS_GCODE_PREVIEW
+ #include "gcode_preview.h"
+#endif
+
+#if HAS_ESDIAG
+ #include "endstop_diag.h"
+#endif
+
+#if HAS_PIDPLOT
+ #include "plot.h"
+#endif
+
+#if HAS_MESH
+ #include "meshviewer.h"
+#endif
+
#if HAS_LOCKSCREEN
#include "lockscreen.h"
#endif
+#define DEBUG_OUT ENABLED(DEBUG_DWIN)
+#include "../../../core/debug_out.h"
+
#ifndef MACHINE_SIZE
#define MACHINE_SIZE STRINGIFY(X_BED_SIZE) "x" STRINGIFY(Y_BED_SIZE) "x" STRINGIFY(Z_MAX_POS)
#endif
#define PAUSE_HEAT
-#define MENU_CHAR_LIMIT 24
-
// Print speed limit
#define MIN_PRINT_SPEED 10
#define MAX_PRINT_SPEED 999
@@ -186,32 +189,21 @@
// Editable temperature limits
#define MIN_ETEMP 0
-#define MAX_ETEMP (HEATER_0_MAXTEMP - (HOTEND_OVERSHOOT))
+#define MAX_ETEMP (thermalManager.hotend_maxtemp[0] - (HOTEND_OVERSHOOT))
#define MIN_BEDTEMP 0
#define MAX_BEDTEMP BED_MAX_TARGET
-#define FEEDRATE_E (60)
-
#define DWIN_VAR_UPDATE_INTERVAL 1024
-#define DWIN_SCROLL_UPDATE_INTERVAL SEC_TO_MS(2)
+#define DWIN_UPDATE_INTERVAL 1024
#define DWIN_REMAIN_TIME_UPDATE_INTERVAL SEC_TO_MS(20)
-#if HAS_MESH
- #define BABY_Z_VAR TERN(HAS_BED_PROBE, probe.offset.z, HMI_data.ManualZOffset)
-#else
- float z_offset = 0;
- #define BABY_Z_VAR z_offset
-#endif
+#define BABY_Z_VAR TERN(HAS_BED_PROBE, probe.offset.z, HMI_data.ManualZOffset)
// Structs
HMI_value_t HMI_value;
HMI_flag_t HMI_flag{0};
HMI_data_t HMI_data;
-millis_t dwin_heat_time = 0;
-
-uint8_t checkkey = 255, last_checkkey = MainMenu;
-
enum SelectItem : uint8_t {
PAGE_PRINT = 0,
PAGE_PREPARE,
@@ -233,11 +225,7 @@ typedef struct {
bool dec() { if (now) now--; return changed(); }
bool inc(uint8_t v) { if (now < (v - 1)) now++; else now = (v - 1); return changed(); }
} select_t;
-
-select_t select_page{0}, select_file{0}, select_print{0};
-uint8_t index_file = MROWS;
-
-bool hash_changed = true; // Flag to know if message status was changed
+select_t select_page{0}, select_print{0};
constexpr float max_feedrate_edit_values[] =
#ifdef MAX_FEEDRATE_EDIT_VALUES
@@ -265,17 +253,21 @@ constexpr float max_acceleration_edit_values[] =
;
#endif
-static uint8_t _percent_done = 0;
-static uint32_t _remain_time = 0;
-
-// Additional Aux Host Support
-static bool sdprint = false;
-
#if HAS_HOTEND
float last_E = 0;
+ #define E_MIN_POS (last_E - (EXTRUDE_MAXLENGTH))
+ #define E_MAX_POS (last_E + (EXTRUDE_MAXLENGTH))
#endif
+bool hash_changed = true; // Flag to know if message status was changed
+uint8_t _percent_done = 0;
+uint32_t _remain_time = 0;
+bool blink = false;
+millis_t dwin_heat_time = 0;
+uint8_t checkkey = 255, last_checkkey = MainMenu;
+
// New menu system pointers
+MenuClass *FileMenu = nullptr;
MenuClass *PrepareMenu = nullptr;
MenuClass *TrammingMenu = nullptr;
MenuClass *MoveMenu = nullptr;
@@ -306,8 +298,12 @@ MenuClass *MaxAccelMenu = nullptr;
MenuClass *MaxJerkMenu = nullptr;
#endif
MenuClass *StepsMenu = nullptr;
-MenuClass *HotendPIDMenu = nullptr;
-MenuClass *BedPIDMenu = nullptr;
+#if ENABLED(PIDTEMP)
+ MenuClass *HotendPIDMenu = nullptr;
+#endif
+#if ENABLED(PIDTEMPBED)
+ MenuClass *BedPIDMenu = nullptr;
+#endif
#if ENABLED(CASELIGHT_USES_BRIGHTNESS)
MenuClass *CaseLightMenu = nullptr;
#endif
@@ -337,6 +333,10 @@ MenuItemClass *FanSpeedItem = nullptr;
MenuItemClass *MMeshMoveZItem = nullptr;
MenuItemClass *EditZValueItem = nullptr;
+bool Printing() { return printingIsActive() || printingIsPaused(); }
+bool SD_Printing() { return Printing() && IS_SD_FILE_OPEN(); }
+bool Host_Printing() { return Printing() && !IS_SD_FILE_OPEN(); }
+
#define DWIN_LANGUAGE_EEPROM_ADDRESS 0x01 // Between 0x01 and 0x63 (EEPROM_OFFSET-1)
// BL24CXX::check() uses 0x00
@@ -368,7 +368,7 @@ void HMI_ToggleLanguage() {
typedef struct { uint16_t x, y[2], w, h; } text_info_t;
void ICON_Button(const bool selected, const int iconid, const frame_rect_t &ico, const text_info_t (&txt), FSTR_P caption) {
- DWIN_ICON_Show(true, false, false, ICON, iconid + selected, ico.x, ico.y);
+ DWINUI::Draw_IconWB(iconid + selected, ico.x, ico.y);
if (selected) DWINUI::Draw_Box(0, HMI_data.Highlight_Color, ico);
if (HMI_IsChinese()) {
DWIN_Frame_AreaCopy(1, txt.x, txt.y[selected], txt.x + txt.w - 1, txt.y[selected] + txt.h - 1, ico.x + (ico.w - txt.w) / 2, (ico.y + ico.h - 25) - txt.h/2);
@@ -452,47 +452,9 @@ void ICON_Stop() {
ICON_Button(select_print.now == PRINT_STOP, ICON_Stop_0, ico, txt, GET_TEXT_F(MSG_BUTTON_STOP));
}
-//-----------------------------------------------------------------------------
-// Drawing routines
-//-----------------------------------------------------------------------------
-
-void Move_Highlight(const int8_t from, const int8_t newline) {
- Erase_Menu_Cursor(newline - from);
- Draw_Menu_Cursor(newline);
-}
-
-void Add_Menu_Line() {
- Move_Highlight(1, MROWS);
- DWIN_Draw_HLine(HMI_data.SplitLine_Color, 16, MYPOS(MROWS + 1), 240);
-}
-
-void Scroll_Menu(const uint8_t dir) {
- DWIN_Frame_AreaMove(1, dir, MLINE, HMI_data.Background_Color, 0, 31, DWIN_WIDTH, 349);
- switch (dir) {
- case DWIN_SCROLL_DOWN: Move_Highlight(-1, 0); break;
- case DWIN_SCROLL_UP: Add_Menu_Line(); break;
- }
-}
-
-inline uint16_t nr_sd_menu_items() {
- return card.get_num_Files() + !card.flag.workDirIsRoot;
-}
-
-void Erase_Menu_Text(const uint8_t line) {
- DWIN_Draw_Rectangle(1, HMI_data.Background_Color, LBLX, MBASE(line) - 14, 271, MBASE(line) + 28);
-}
-
-// Draw "Back" line at the top
-void Draw_Back_First(const bool is_sel=true) {
- Draw_Menu_Line(0, ICON_Back);
- if (HMI_IsChinese())
- DWIN_Frame_AreaCopy(1, 129, 72, 156, 84, LBLX, MBASE(0));
- else
- DWINUI::Draw_String(LBLX, MBASE(0), GET_TEXT_F(MSG_BACK));
- if (is_sel) Draw_Menu_Cursor(0);
-}
-
+//
//PopUps
+//
void Popup_window_PauseOrStop() {
if (HMI_IsChinese()) {
DWINUI::ClearMainArea();
@@ -546,15 +508,19 @@ void Popup_window_PauseOrStop() {
DWIN_Frame_AreaCopy(1, 189, 389, 271, 402, 95, 310);
}
}
- else DWIN_Show_Popup(toohigh ? ICON_TempTooHigh : ICON_TempTooLow, F("Nozzle or Bed temperature"), toohigh ? F("is too high") : F("is too low"), BTN_Continue);
+ else
+ DWIN_Show_Popup(toohigh ? ICON_TempTooHigh : ICON_TempTooLow, F("Nozzle or Bed temperature"), toohigh ? F("is too high") : F("is too low"), BTN_Continue);
}
#endif
+//
// Draw status line
-void DWIN_DrawStatusLine() {
+//
+void DWIN_DrawStatusLine(const char *text) {
DWIN_Draw_Rectangle(1, HMI_data.StatusBg_Color, 0, STATUS_Y, DWIN_WIDTH, STATUS_Y + 20);
- DWINUI::Draw_CenteredString(HMI_data.StatusTxt_Color, STATUS_Y + 2, ui.status_message);
+ if (text) DWINUI::Draw_CenteredString(HMI_data.StatusTxt_Color, STATUS_Y + 2, text);
}
+void DWIN_DrawStatusLine(FSTR_P fstr) { DWIN_DrawStatusLine(FTOP(fstr)); }
// Clear & reset status line
void DWIN_ResetStatusLine() {
@@ -563,12 +529,16 @@ void DWIN_ResetStatusLine() {
}
// Djb2 hash algorithm
-void DWIN_CheckStatusMessage() {
- static uint32_t old_hash = 0;
- char * str = &ui.status_message[0];
+uint32_t GetHash(char * str) {
uint32_t hash = 5381;
char c;
while ((c = *str++)) hash = ((hash << 5) + hash) + c; /* hash * 33 + c */
+ return hash;
+}
+
+void DWIN_CheckStatusMessage() {
+ static uint32_t old_hash = 0;
+ uint32_t hash = GetHash(&ui.status_message[0]);
hash_changed = hash != old_hash;
old_hash = hash;
};
@@ -582,7 +552,7 @@ void DWIN_DrawStatusMessage() {
// If the string fits the status line do not scroll it
if (slen <= LCD_WIDTH) {
if (hash_changed) {
- DWIN_DrawStatusLine();
+ DWIN_DrawStatusLine(ui.status_message);
hash_changed = false;
}
}
@@ -601,7 +571,7 @@ void DWIN_DrawStatusMessage() {
if (rlen < LCD_WIDTH) {
DWINUI::Draw_Char(HMI_data.StatusTxt_Color, '.'); // Always at 1+ spaces left, draw a dot
uint8_t chars = LCD_WIDTH - rlen; // Amount of space left in characters
- if (--chars) { // Draw a second dot if there's space
+ if (--chars) { // Draw a second dot if there's space
DWINUI::Draw_Char(HMI_data.StatusTxt_Color, '.');
if (--chars)
DWINUI::Draw_String(HMI_data.StatusTxt_Color, ui.status_message, chars); // Print a second copy of the message
@@ -614,7 +584,7 @@ void DWIN_DrawStatusMessage() {
if (hash_changed) {
ui.status_message[LCD_WIDTH] = 0;
- DWIN_DrawStatusLine();
+ DWIN_DrawStatusLine(ui.status_message);
hash_changed = false;
}
@@ -633,7 +603,7 @@ void Draw_Print_Labels() {
}
void Draw_Print_ProgressBar() {
- DWIN_ICON_Show(true, false, false, ICON, ICON_Bar, 15, 93);
+ DWINUI::Draw_IconWB(ICON_Bar, 15, 93);
DWIN_Draw_Rectangle(1, HMI_data.Barfill_Color, 16 + _percent_done * 240 / 100, 93, 256, 113);
DWINUI::Draw_Int(HMI_data.PercentTxt_Color, HMI_data.Background_Color, 3, 117, 133, _percent_done);
DWINUI::Draw_String(HMI_data.PercentTxt_Color, 142, 133, F("%"));
@@ -657,7 +627,7 @@ void ICON_ResumeOrPause() {
}
// Update filename on print
-void DWIN_Print_Header(const char *text=nullptr) {
+void DWIN_Print_Header(const char *text = nullptr) {
static char headertxt[31] = ""; // Print header text
if (text) {
const int8_t size = _MIN(30U, strlen_P(text));
@@ -676,7 +646,7 @@ void Draw_PrintProcess() {
else
Title.ShowCaption(GET_TEXT_F(MSG_PRINTING));
DWINUI::ClearMainArea();
- DWIN_Print_Header(sdprint ? card.longest_filename() : nullptr);
+ DWIN_Print_Header(SD_Printing() ? card.longest_filename() : nullptr);
Draw_Print_Labels();
DWINUI::Draw_Icon(ICON_PrintTime, 15, 173);
DWINUI::Draw_Icon(ICON_RemainTime, 150, 171);
@@ -707,11 +677,14 @@ void Draw_PrintDone() {
Title.ShowCaption(GET_TEXT_F(MSG_PRINT_DONE));
DWINUI::ClearMainArea();
DWIN_Print_Header(nullptr);
- if (sdprint && TERN0(HAS_GCODE_PREVIEW, Preview_Valid())) {
- DWIN_ICON_Show(0, 0, 1, 21, 100, 0x00);
- DWINUI::Draw_Button(BTN_Continue, 86, 300);
- }
- else {
+ #if HAS_GCODE_PREVIEW
+ if (Preview_Valid()) {
+ DWIN_ICON_Show(0, 0, 1, 21, 100, 0x00);
+ DWINUI::Draw_Button(BTN_Continue, 86, 300);
+ }
+ else
+ #endif
+ {
Draw_Print_ProgressBar();
Draw_Print_Labels();
DWINUI::Draw_Icon(ICON_PrintTime, 15, 173);
@@ -738,7 +711,6 @@ void Draw_Main_Menu() {
else
Title.ShowCaption(MACHINE_NAME);
DWINUI::Draw_Icon(ICON_LOGO, 71, 52); // CREALITY logo
- DWIN_ResetStatusLine();
ICON_Print();
ICON_Prepare();
ICON_Control();
@@ -753,13 +725,19 @@ void Goto_Main_Menu() {
}
// Draw X, Y, Z and blink if in an un-homed or un-trusted state
-void _update_axis_value(const AxisEnum axis, const uint16_t x, const uint16_t y, const bool blink, const bool force) {
+void _update_axis_value(const AxisEnum axis, const uint16_t x, const uint16_t y, const bool force) {
const bool draw_qmark = axis_should_home(axis),
draw_empty = NONE(HOME_AFTER_DEACTIVATE, DISABLE_REDUCED_ACCURACY_WARNING) && !draw_qmark && !axis_is_trusted(axis);
// Check for a position change
static xyz_pos_t oldpos = { -1, -1, -1 };
- const float p = current_position[axis];
+
+ #if ENABLED(SHOW_REAL_POS)
+ const float p = stepper.position(axis) / planner.settings.axis_steps_per_mm[axis];
+ #else
+ const float p = current_position[axis];
+ #endif
+
const bool changed = oldpos[axis] != p;
if (changed) oldpos[axis] = p;
@@ -773,18 +751,38 @@ void _update_axis_value(const AxisEnum axis, const uint16_t x, const uint16_t y,
}
}
+void _draw_ZOffsetIcon() {
+ #if HAS_LEVELING
+ #if NO_BLINK_LEV_IND
+ static bool _leveling_active = false;
+ if (_leveling_active != planner.leveling_active) {
+ _leveling_active = planner.leveling_active;
+ DWIN_Draw_Rectangle(1, HMI_data.Background_Color, 186, 415, 205, 436);
+ DWINUI::Draw_Icon(_leveling_active ? ICON_SetZOffset : ICON_Zoffset, 187, 416);
+ }
+ #else
+ if (planner.leveling_active) {
+ DWIN_Draw_Rectangle(1, blink ? HMI_data.SplitLine_Color : HMI_data.Background_Color, 186, 415, 205, 436);
+ DWINUI::Draw_Icon(ICON_SetZOffset, 186, 416);
+ }
+ static bool _leveling_active = false;
+ if (_leveling_active != planner.leveling_active) {
+ _leveling_active = planner.leveling_active;
+ if (!_leveling_active) {
+ DWIN_Draw_Rectangle(1, HMI_data.Background_Color, 186, 415, 205, 436);
+ DWINUI::Draw_Icon(ICON_Zoffset, 187, 416);
+ }
+ }
+ #endif
+ #else
+ DWINUI::Draw_Icon(ICON_Zoffset, 187, 416);
+ #endif
+}
+
void _draw_xyz_position(const bool force) {
- //SERIAL_ECHOPGM("Draw XYZ:");
- static bool _blink = false;
- const bool blink = !!(millis() & 0x400UL);
- if (force || blink != _blink) {
- _blink = blink;
- //SERIAL_ECHOPGM(" (blink)");
- _update_axis_value(X_AXIS, 27, 459, blink, true);
- _update_axis_value(Y_AXIS, 112, 459, blink, true);
- _update_axis_value(Z_AXIS, 197, 459, blink, true);
- }
- //SERIAL_EOL();
+ _update_axis_value(X_AXIS, 27, 459, force);
+ _update_axis_value(Y_AXIS, 112, 459, force);
+ _update_axis_value(Z_AXIS, 197, 459, force);
}
void update_variable() {
@@ -812,7 +810,7 @@ void update_variable() {
if (_new_fanspeed) _fanspeed = thermalManager.fan_speed[0];
#endif
- if (checkkey == Menu && (CurrentMenu == TuneMenu || CurrentMenu == TemperatureMenu)) {
+ if (IsMenu(TuneMenu) || IsMenu(TemperatureMenu)) {
// Tune page temperature update
#if HAS_HOTEND
if (_new_hotend_target) HotendTargetItem->redraw();
@@ -866,34 +864,23 @@ void update_variable() {
DWINUI::Draw_Signed_Float(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 2, 2, 204, 417, _offset);
}
- #if HAS_MESH
- static bool _leveling_active = false;
- if (_leveling_active != planner.leveling_active) {
- _leveling_active = planner.leveling_active;
- DWIN_Draw_Box(1, HMI_data.Background_Color, 186, 416, 20, 20);
- if (_leveling_active)
- DWINUI::Draw_Icon(ICON_SetZOffset, 186, 416);
- else
- DWINUI::Draw_Icon(ICON_Zoffset, 187, 416);
- }
- #else
- DWINUI::Draw_Icon(ICON_Zoffset, 187, 416);
- #endif
-
+ _draw_ZOffsetIcon();
_draw_xyz_position(false);
}
/**
- * Read and cache the working directory.
- *
- * TODO: New code can follow the pattern of menu_media.cpp
- * and rely on Marlin caching for performance. No need to
- * cache files here.
+ * Memory card and file management
*/
-#ifndef strcasecmp_P
- #define strcasecmp_P(a, b) strcasecmp((a), (b))
-#endif
+bool DWIN_lcd_sd_status = false;
+
+void SetMediaAutoMount() {
+ Toogle_Chkb_Line(HMI_data.MediaAutoMount);
+}
+
+inline uint16_t nr_sd_menu_items() {
+ return _MIN(card.get_num_Files() + !card.flag.workDirIsRoot, MENU_MAX_ITEMS);
+}
void make_name_without_ext(char *dst, char *src, size_t maxlen=MENU_CHAR_LIMIT) {
size_t pos = strlen(src); // index of ending nul
@@ -919,117 +906,121 @@ void make_name_without_ext(char *dst, char *src, size_t maxlen=MENU_CHAR_LIMIT)
while (pos--) dst[pos] = src[pos];
}
-void HMI_SDCardInit() { card.cdroot(); }
+void Redraw_SD_List() {
+ InvalidateMenu();
+ Draw_Print_File_Menu();
+}
-#if ENABLED(SCROLL_LONG_FILENAMES)
+void SDCard_Up() {
+ card.cdup();
+ DWIN_lcd_sd_status = false; // On next DWIN_Update
+}
- char shift_name[LONG_FILENAME_LENGTH + 1];
- int8_t shift_amt; // = 0
- millis_t shift_ms; // = 0
+void SDCard_Folder(char * const dirname) {
+ card.cd(dirname);
+ DWIN_lcd_sd_status = false; // On next DWIN_Update
+}
- // Init the shift name based on the highlighted item
- void Init_Shift_Name() {
- const bool is_subdir = !card.flag.workDirIsRoot;
- const int8_t filenum = select_file.now - 1 - is_subdir; // Skip "Back" and ".."
- const uint16_t fileCnt = card.get_num_Files();
- if (WITHIN(filenum, 0, fileCnt - 1)) {
- card.getfilename_sorted(SD_ORDER(filenum, fileCnt));
- char * const name = card.longest_filename();
- make_name_without_ext(shift_name, name, 100);
- }
+void onClickSDItem() {
+ const uint16_t hasUpDir = !card.flag.workDirIsRoot;
+ if (hasUpDir && CurrentMenu->selected == 1) return SDCard_Up();
+ else {
+ const uint16_t filenum = CurrentMenu->selected - 1 - hasUpDir;
+ card.getfilename_sorted(SD_ORDER(filenum, card.get_num_Files()));
+
+ // Enter that folder!
+ if (card.flag.filenameIsDir) return SDCard_Folder(card.filename);
+
+ if (card.fileIsBinary())
+ return DWIN_Popup_Confirm(ICON_Error, F("Please check filenames"), F("Only G-code can be printed"));
+ else
+ return Goto_ConfirmToPrint();
}
-
- void Init_SDItem_Shift() {
- shift_amt = 0;
- shift_ms = select_file.now > 0 && strlen(shift_name) > MENU_CHAR_LIMIT ? millis() + 750UL : 0;
- }
-
-#endif
-
-/**
- * Display an SD item, adding a CDUP for subfolders.
- */
-void Draw_SDItem(const uint16_t item, int16_t row=-1) {
- if (row < 0) row = item + 1 + MROWS - index_file;
- const bool is_subdir = !card.flag.workDirIsRoot;
- if (is_subdir && item == 0)
- return Draw_Menu_Line(row, ICON_Folder, "..");
-
- card.getfilename_sorted(SD_ORDER(item - is_subdir, card.get_num_Files()));
- char * const name = card.longest_filename();
-
- #if ENABLED(SCROLL_LONG_FILENAMES)
- // Init the current selected name
- // This is used during scroll drawing
- if (item == select_file.now - 1) {
- make_name_without_ext(shift_name, name, 100);
- Init_SDItem_Shift();
- }
- #endif
-
- // Draw the file/folder with name aligned left
- char str[strlen(name) + 1];
- make_name_without_ext(str, name);
- const uint8_t icon = card.flag.filenameIsDir ? ICON_Folder : card.fileIsBinary() ? ICON_Binary : ICON_File;
- Draw_Menu_Line(row, icon, str);
}
#if ENABLED(SCROLL_LONG_FILENAMES)
+ char shift_name[LONG_FILENAME_LENGTH + 1] = "";
void Draw_SDItem_Shifted(uint8_t &shift) {
- // Limit to the number of chars past the cutoff
- const size_t len = strlen(shift_name);
- NOMORE(shift, _MAX(len - MENU_CHAR_LIMIT, 0U));
-
// Shorten to the available space
- const size_t lastchar = _MIN((signed)len, shift + MENU_CHAR_LIMIT);
-
+ const size_t lastchar = shift + MENU_CHAR_LIMIT;
const char c = shift_name[lastchar];
shift_name[lastchar] = '\0';
- const uint8_t row = select_file.now + MROWS - index_file; // skip "Back" and scroll
+ const uint8_t row = FileMenu->line();
Erase_Menu_Text(row);
Draw_Menu_Line(row, 0, &shift_name[shift]);
shift_name[lastchar] = c;
}
+ void FileMenuIdle(bool reset=false) {
+ static bool hasUpDir = false;
+ static uint8_t last_itemselected = 0;
+ static int8_t shift_amt = 0;
+ static int8_t shift_len = 0;
+ if (reset) {
+ last_itemselected = 0;
+ hasUpDir = !card.flag.workDirIsRoot; // is a SubDir
+ return;
+ }
+ const uint8_t selected = FileMenu->selected;
+ if (last_itemselected != selected) {
+ if (last_itemselected >= 1 + hasUpDir) FileMenu->Items()[last_itemselected]->redraw(true);
+ last_itemselected = selected;
+ if (selected >= 1 + hasUpDir) {
+ const int8_t filenum = selected - 1 - hasUpDir; // Skip "Back" and ".."
+ card.getfilename_sorted(SD_ORDER(filenum, card.get_num_Files()));
+ make_name_without_ext(shift_name, card.longest_filename(), LONG_FILENAME_LENGTH);
+ shift_len = strlen(shift_name);
+ shift_amt = 0;
+ }
+ }
+ else if ((selected >= 1 + hasUpDir) && (shift_len > MENU_CHAR_LIMIT)) {
+ uint8_t shift_new = _MIN(shift_amt + 1, shift_len - MENU_CHAR_LIMIT); // Try to shift by...
+ Draw_SDItem_Shifted(shift_new); // Draw the item
+ if (shift_new == shift_amt) // Scroll reached the end
+ shift_new = -1; // Reset
+ shift_amt = shift_new; // Set new scroll
+ }
+ }
+#else
+ char shift_name[FILENAME_LENGTH + 1] = "";
#endif
-// Redraw the first set of SD Files
-void Redraw_SD_List() {
- select_file.reset();
- index_file = MROWS;
-
- DWINUI::ClearMainArea(); // Leave title bar unchanged
-
- Draw_Back_First();
-
- if (card.isMounted()) {
- // As many files as will fit
- LOOP_L_N(i, _MIN(nr_sd_menu_items(), MROWS))
- Draw_SDItem(i, i + 1);
-
- TERN_(SCROLL_LONG_FILENAMES, Init_SDItem_Shift());
+void onDrawFileName(MenuItemClass* menuitem, int8_t line) {
+ const bool is_subdir = !card.flag.workDirIsRoot;
+ if (is_subdir && menuitem->pos == 1) {
+ Draw_Menu_Line(line, ICON_Folder, "..");
}
else {
+ uint8_t icon;
+ card.getfilename_sorted(SD_ORDER(menuitem->pos - is_subdir - 1, card.get_num_Files()));
+ make_name_without_ext(shift_name, card.longest_filename());
+ icon = card.flag.filenameIsDir ? ICON_Folder : card.fileIsBinary() ? ICON_Binary : ICON_File;
+ Draw_Menu_Line(line, icon, shift_name);
+ }
+}
+
+void Draw_Print_File_Menu() {
+ checkkey = Menu;
+ if (card.isMounted()) {
+ if (SET_MENU(FileMenu, MSG_MEDIA_MENU, nr_sd_menu_items() + 1)) {
+ BACK_ITEM(Goto_Main_Menu);
+ LOOP_L_N(i, nr_sd_menu_items()) {
+ MenuItemAdd(onDrawFileName, onClickSDItem);
+ }
+ }
+ UpdateMenu(FileMenu);
+ TERN_(DASH_REDRAW, DWIN_RedrawDash());
+ }
+ else {
+ if (SET_MENU(FileMenu, MSG_MEDIA_MENU, 1)) BACK_ITEM(Goto_Main_Menu);
+ UpdateMenu(FileMenu);
DWIN_Draw_Rectangle(1, HMI_data.AlertBg_Color, 10, MBASE(3) - 10, DWIN_WIDTH - 10, MBASE(4));
DWINUI::Draw_CenteredString(font12x24, HMI_data.AlertTxt_Color, MBASE(3), GET_TEXT_F(MSG_MEDIA_NOT_INSERTED));
}
-}
-
-bool DWIN_lcd_sd_status = false;
-
-void SDCard_Up() {
- card.cdup();
- Redraw_SD_List();
- DWIN_lcd_sd_status = false; // On next DWIN_Update
-}
-
-void SDCard_Folder(char * const dirname) {
- card.cd(dirname);
- Redraw_SD_List();
- DWIN_lcd_sd_status = false; // On next DWIN_Update
+ TERN_(SCROLL_LONG_FILENAMES, FileMenuIdle(true));
}
//
@@ -1039,29 +1030,16 @@ void HMI_SDCardUpdate() {
if (HMI_flag.home_flag) return;
if (DWIN_lcd_sd_status != card.isMounted()) {
DWIN_lcd_sd_status = card.isMounted();
- //SERIAL_ECHOLNPGM("HMI_SDCardUpdate: ", DWIN_lcd_sd_status);
- if (DWIN_lcd_sd_status) { // Media inserted
- if (checkkey == SelectFile)
- Redraw_SD_List();
- }
- else { // Media removed
- // clean file icon
- if (checkkey == SelectFile) {
- Redraw_SD_List();
- }
- else if (sdprint && card.isPrinting() && printingIsActive()) {
- wait_for_heatup = wait_for_user = false;
- HMI_flag.abort_flag = true; // Abort print
- }
- }
+ if (IsMenu(FileMenu)) Redraw_SD_List();
+ if (!DWIN_lcd_sd_status && SD_Printing()) ui.abort_print(); // Media removed while printing
DWIN_UpdateLCD();
}
}
-//
-// The Dashboard is always on-screen, except during
-// full-screen modal dialogs.
-//
+/**
+ * Dash board and indicators
+ */
+
void DWIN_Draw_Dashboard() {
DWIN_Draw_Rectangle(1, HMI_data.Background_Color, 0, STATUS_Y + 21, DWIN_WIDTH, DWIN_HEIGHT - 1);
@@ -1110,11 +1088,11 @@ void DWIN_Draw_Dashboard() {
void Draw_Info_Menu() {
DWINUI::ClearMainArea();
- Draw_Back_First();
if (HMI_IsChinese())
Title.FrameCopy(30, 17, 28, 13); // "Info"
else
Title.ShowCaption(GET_TEXT_F(MSG_INFO_SCREEN));
+ Draw_Menu_Line(0, ICON_Back, GET_TEXT_F(MSG_BACK), false, true);
if (HMI_IsChinese()) {
DWIN_Frame_AreaCopy(1, 197, 149, 252, 161, 108, 102); // "Size"
@@ -1137,15 +1115,6 @@ void Draw_Info_Menu() {
}
}
-void Draw_Print_File_Menu() {
- if (HMI_IsChinese())
- Title.FrameCopy(0, 31, 56, 14); // "Print file"
- else
- Title.ShowCaption(GET_TEXT_F(MSG_MEDIA_MENU));
- Redraw_SD_List();
- TERN_(DASH_REDRAW, DWIN_RedrawDash());
-}
-
// Main Process
void HMI_MainMenu() {
EncoderState encoder_diffState = get_encoder_state();
@@ -1174,9 +1143,10 @@ void HMI_MainMenu() {
else if (encoder_diffState == ENCODER_DIFF_ENTER) {
switch (select_page.now) {
case PAGE_PRINT:
- checkkey = SelectFile;
- card.mount();
- safe_delay(300);
+ if (HMI_data.MediaAutoMount) {
+ card.mount();
+ safe_delay(800);
+ };
Draw_Print_File_Menu();
break;
case PAGE_PREPARE: Draw_Prepare_Menu(); break;
@@ -1187,125 +1157,11 @@ void HMI_MainMenu() {
DWIN_UpdateLCD();
}
-// Select (and Print) File
-void HMI_SelectFile() {
- EncoderState encoder_diffState = get_encoder_state();
-
- const uint16_t hasUpDir = !card.flag.workDirIsRoot;
-
- if (encoder_diffState == ENCODER_DIFF_NO) {
- #if ENABLED(SCROLL_LONG_FILENAMES)
- if (shift_ms && select_file.now >= 1 + hasUpDir) {
- // Scroll selected filename every second
- const millis_t ms = millis();
- if (ELAPSED(ms, shift_ms)) {
- const bool was_reset = shift_amt < 0;
- shift_ms = ms + 375UL + was_reset * 250UL; // ms per character
- uint8_t shift_new = shift_amt + 1; // Try to shift by...
- Draw_SDItem_Shifted(shift_new); // Draw the item
- if (!was_reset && shift_new == 0) // Was it limited to 0?
- shift_ms = 0; // No scrolling needed
- else if (shift_new == shift_amt) // Scroll reached the end
- shift_new = -1; // Reset
- shift_amt = shift_new; // Set new scroll
- }
- }
- #endif
- return;
- }
-
- // First pause is long. Easy.
- // On reset, long pause must be after 0.
-
- const uint16_t fullCnt = nr_sd_menu_items();
-
- if (encoder_diffState == ENCODER_DIFF_CW && fullCnt) {
- if (select_file.inc(1 + fullCnt)) {
- const uint8_t itemnum = select_file.now - 1; // -1 for "Back"
- if (TERN0(SCROLL_LONG_FILENAMES, shift_ms)) { // If line was shifted
- Erase_Menu_Text(itemnum + MROWS - index_file); // Erase and
- Draw_SDItem(itemnum - 1); // redraw
- }
- if (select_file.now > MROWS && select_file.now > index_file) { // Cursor past the bottom
- index_file = select_file.now; // New bottom line
- Scroll_Menu(DWIN_SCROLL_UP);
- Draw_SDItem(itemnum, MROWS); // Draw and init the shift name
- }
- else {
- Move_Highlight(1, select_file.now + MROWS - index_file); // Just move highlight
- TERN_(SCROLL_LONG_FILENAMES, Init_Shift_Name()); // ...and init the shift name
- }
- TERN_(SCROLL_LONG_FILENAMES, Init_SDItem_Shift());
- }
- }
- else if (encoder_diffState == ENCODER_DIFF_CCW && fullCnt) {
- if (select_file.dec()) {
- const uint8_t itemnum = select_file.now - 1; // -1 for "Back"
- if (TERN0(SCROLL_LONG_FILENAMES, shift_ms)) { // If line was shifted
- Erase_Menu_Text(select_file.now + 1 + MROWS - index_file); // Erase and
- Draw_SDItem(itemnum + 1); // redraw
- }
- if (select_file.now < index_file - MROWS) { // Cursor past the top
- index_file--; // New bottom line
- Scroll_Menu(DWIN_SCROLL_DOWN);
- if (index_file == MROWS) {
- Draw_Back_First();
- TERN_(SCROLL_LONG_FILENAMES, shift_ms = 0);
- }
- else {
- Draw_SDItem(itemnum, 0); // Draw the item (and init shift name)
- }
- }
- else {
- Move_Highlight(-1, select_file.now + MROWS - index_file); // Just move highlight
- TERN_(SCROLL_LONG_FILENAMES, Init_Shift_Name()); // ...and init the shift name
- }
- TERN_(SCROLL_LONG_FILENAMES, Init_SDItem_Shift()); // Reset left. Init timer.
- }
- }
- else if (encoder_diffState == ENCODER_DIFF_ENTER) {
- if (select_file.now == 0) { // Back
- select_page.set(PAGE_PRINT);
- return Goto_Main_Menu();
- }
- else if (hasUpDir && select_file.now == 1) { // CD-Up
- SDCard_Up();
- goto HMI_SelectFileExit;
- }
- else {
- const uint16_t filenum = select_file.now - 1 - hasUpDir;
- card.getfilename_sorted(SD_ORDER(filenum, card.get_num_Files()));
-
- // Enter that folder!
- if (card.flag.filenameIsDir) {
- SDCard_Folder(card.filename);
- goto HMI_SelectFileExit;
- }
-
- // Reset highlight for next entry
- select_print.reset();
- select_file.reset();
-
- // Start choice and print SD file
- HMI_flag.heat_flag = true;
- HMI_flag.print_finish = false;
-
- if (card.fileIsBinary())
- return DWIN_Popup_Confirm(ICON_Error, F("Please check filenames"), F("Only G-code can be printed"));
- else
- return Goto_ConfirmToPrint();
- }
- }
-
- HMI_SelectFileExit:
- DWIN_UpdateLCD();
-}
-
// Pause or Stop popup
void onClick_PauseOrStop() {
switch (select_print.now) {
- case PRINT_PAUSE_RESUME: if (HMI_flag.select_flag) HMI_flag.pause_flag = true; break; // confirm pause
- case PRINT_STOP: if (HMI_flag.select_flag) HMI_flag.abort_flag = true; break; // stop confirmed then abort print
+ case PRINT_PAUSE_RESUME: if (HMI_flag.select_flag) ui.pause_print(); break; // confirm pause
+ case PRINT_STOP: if (HMI_flag.select_flag) ui.abort_print(); break; // stop confirmed then abort print
default: break;
}
return Goto_PrintProcess();
@@ -1357,7 +1213,6 @@ void HMI_Printing() {
void Draw_Main_Area() {
switch (checkkey) {
case MainMenu: Draw_Main_Menu(); break;
- case SelectFile: Draw_Print_File_Menu(); break;
case PrintProcess: Draw_PrintProcess(); break;
case PrintDone: Draw_PrintDone(); break;
#if HAS_ESDIAG
@@ -1384,27 +1239,35 @@ void HMI_ReturnScreen() {
}
void HMI_WaitForUser() {
- get_encoder_state();
+ EncoderState encoder_diffState = get_encoder_state();
+ if (encoder_diffState != ENCODER_DIFF_NO && !ui.backlight) {
+ if (checkkey == WaitResponse) HMI_ReturnScreen();
+ return ui.refresh_brightness();
+ }
if (!wait_for_user) {
switch (checkkey) {
case PrintDone:
select_page.reset();
Goto_Main_Menu();
break;
- TERN_(HAS_ONESTEP_LEVELING, case Leveling:)
- default: HMI_ReturnScreen(); break;
+ #if HAS_BED_PROBE
+ case Leveling:
+ #endif
+ default:
+ HMI_ReturnScreen();
+ break;
}
}
}
void HMI_Init() {
- DWINUI::Draw_Box(1, Color_Black, {5, 220, DWIN_WIDTH-5, DWINUI::fontHeight()});
+ DWINUI::Draw_Box(1, Color_Black, { 5, 220, DWIN_WIDTH - 5, DWINUI::fontHeight() });
DWINUI::Draw_CenteredString(Color_White, 220, F("Professional Firmware "));
- for (uint16_t t = 0; t <= 100; t += 2) {
+ for (uint16_t t = 15; t <= 257; t += 10) {
DWINUI::Draw_Icon(ICON_Bar, 15, 260);
- DWIN_Draw_Rectangle(1, HMI_data.Background_Color, 15 + t * 242 / 100, 260, 257, 280);
+ DWIN_Draw_Rectangle(1, HMI_data.Background_Color, t, 260, 257, 280);
DWIN_UpdateLCD();
- delay(20);
+ delay(50);
}
HMI_SetLanguage();
}
@@ -1415,12 +1278,13 @@ void EachMomentUpdate() {
if (ELAPSED(ms, next_var_update_ms)) {
next_var_update_ms = ms + DWIN_VAR_UPDATE_INTERVAL;
+ blink = !blink;
update_variable();
#if HAS_ESDIAG
if (checkkey == ESDiagProcess) ESDiag.Update();
#endif
#if HAS_PIDPLOT
- if (checkkey == PidProcess) Plot.Update((HMI_value.pidresult == PID_EXTR_START) ? thermalManager.wholeDegHotend(0) : thermalManager.wholeDegBed());
+ if (checkkey == PidProcess) Plot.Update((HMI_value.pidresult == PIDTEMP_START) ? thermalManager.wholeDegHotend(0) : thermalManager.wholeDegBed());
#endif
}
@@ -1433,73 +1297,73 @@ void EachMomentUpdate() {
if (ELAPSED(ms, next_status_update_ms)) {
next_status_update_ms = ms + 500;
DWIN_DrawStatusMessage();
+ #if ENABLED(SCROLL_LONG_FILENAMES)
+ if (IsMenu(FileMenu)) FileMenuIdle();
+ #endif
}
- if (PENDING(ms, next_rts_update_ms)) return;
- next_rts_update_ms = ms + DWIN_SCROLL_UPDATE_INTERVAL;
+ if (!PENDING(ms, next_rts_update_ms)) {
+ next_rts_update_ms = ms + DWIN_UPDATE_INTERVAL;
- if (checkkey == PrintProcess) { // print process
-
- // Print pause
- if (HMI_flag.pause_flag && !HMI_flag.home_flag) {
- HMI_flag.pause_flag = false;
- if (!HMI_flag.pause_action) {
- HMI_flag.pause_action = true;
- return ui.pause_print();
- }
+ if ((Printing() != HMI_flag.printing_flag) && !HMI_flag.home_flag) {
+ HMI_flag.printing_flag = Printing();
+ DEBUG_ECHOLNPGM("printing_flag: ", HMI_flag.printing_flag);
+ if (HMI_flag.printing_flag)
+ DWIN_Print_Started();
+ else if (HMI_flag.abort_flag)
+ DWIN_Print_Aborted();
+ else
+ DWIN_Print_Finished();
}
- // if print done
- if (HMI_flag.print_finish && !HMI_flag.home_flag) {
- HMI_flag.print_finish = false;
- return DWIN_Print_Finished();
+ if ((printingIsPaused() != HMI_flag.pause_flag) && !HMI_flag.home_flag) {
+ HMI_flag.pause_flag = printingIsPaused();
+ DEBUG_ECHOLNPGM("pause_flag: ", HMI_flag.pause_flag);
+ if (HMI_flag.pause_flag)
+ DWIN_Print_Pause();
+ else if (HMI_flag.abort_flag)
+ DWIN_Print_Aborted();
+ else
+ DWIN_Print_Resume();
}
- // if print was aborted
- if (HMI_flag.abort_flag && !HMI_flag.home_flag) { // Print Stop
- HMI_flag.abort_flag = false;
- if (!HMI_flag.abort_action) {
- HMI_flag.abort_action = true;
- ui.abort_print();
- return Goto_PrintDone();
- }
- }
+ if (checkkey == PrintProcess) { // print process
- duration_t elapsed = print_job_timer.duration(); // print timer
+ duration_t elapsed = print_job_timer.duration(); // print timer
- if (sdprint && card.isPrinting() && !HMI_flag.percent_flag) {
- uint8_t percentDone = card.percentDone();
- if (_percent_done != percentDone) { // print percent
- _percent_done = percentDone;
- Draw_Print_ProgressBar();
+ if (card.isPrinting() && !HMI_flag.percent_flag) {
+ uint8_t percentDone = card.percentDone();
+ if (_percent_done != percentDone) { // print percent
+ _percent_done = percentDone;
+ Draw_Print_ProgressBar();
}
- // Estimate remaining time every 20 seconds
- static millis_t next_remain_time_update = 0;
- if (_percent_done > 1 && ELAPSED(ms, next_remain_time_update) && !HMI_flag.heat_flag && !HMI_flag.remain_flag) {
- _remain_time = (elapsed.value - dwin_heat_time) / (_percent_done * 0.01f) - (elapsed.value - dwin_heat_time);
- next_remain_time_update += DWIN_REMAIN_TIME_UPDATE_INTERVAL;
- Draw_Print_ProgressRemain();
+ // Estimate remaining time every 20 seconds
+ static millis_t next_remain_time_update = 0;
+ if (_percent_done > 1 && ELAPSED(ms, next_remain_time_update) && !HMI_flag.heat_flag && !HMI_flag.remain_flag) {
+ _remain_time = (elapsed.value - dwin_heat_time) / (_percent_done * 0.01f) - (elapsed.value - dwin_heat_time);
+ next_remain_time_update += DWIN_REMAIN_TIME_UPDATE_INTERVAL;
+ Draw_Print_ProgressRemain();
+ }
}
- }
- // Print time so far
- static uint16_t last_Printtime = 0;
- const uint16_t min = (elapsed.value % 3600) / 60;
- if (last_Printtime != min) { // 1 minute update
- last_Printtime = min;
- Draw_Print_ProgressElapsed();
- }
+ // Print time so far
+ static uint16_t last_Printtime = 0;
+ const uint16_t min = (elapsed.value % 3600) / 60;
+ if (last_Printtime != min) { // 1 minute update
+ last_Printtime = min;
+ Draw_Print_ProgressElapsed();
+ }
+ }
+ #if ENABLED(POWER_LOSS_RECOVERY)
+ else if (DWIN_lcd_sd_status && recovery.dwin_flag) { // resume print before power off
+ return Goto_PowerLossRecovery();
+ }
+ #endif // POWER_LOSS_RECOVERY
+
+ DWIN_UpdateLCD();
}
-
- #if ENABLED(POWER_LOSS_RECOVERY)
- else if (DWIN_lcd_sd_status && recovery.dwin_flag) { // resume print before power off
- return Goto_PowerLossRecovery();
- }
- #endif // POWER_LOSS_RECOVERY
-
- DWIN_UpdateLCD();
}
#if ENABLED(POWER_LOSS_RECOVERY)
@@ -1536,8 +1400,6 @@ void EachMomentUpdate() {
else {
select_print.set(PRINT_SETUP);
queue.inject(F("M1000"));
- sdprint = true;
- return Goto_PrintProcess();
}
}
@@ -1554,12 +1416,11 @@ void DWIN_HandleScreen() {
switch (checkkey) {
case MainMenu: HMI_MainMenu(); break;
case Menu: HMI_Menu(); break;
- case SetInt: HMI_SetInt(); break;
+ case SetInt: HMI_SetDraw(); break;
+ case SetFloat: HMI_SetDraw(); break;
case SetPInt: HMI_SetPInt(); break;
- case SetIntNoDraw: HMI_SetIntNoDraw(); break;
- case SetFloat: HMI_SetFloat(); break;
case SetPFloat: HMI_SetPFloat(); break;
- case SelectFile: HMI_SelectFile(); break;
+ case SetIntNoDraw: HMI_SetNoDraw(); break;
case PrintProcess: HMI_Printing(); break;
case Popup: HMI_Popup(); break;
case Leveling: break;
@@ -1607,15 +1468,15 @@ void DWIN_HomingStart() {
void DWIN_HomingDone() {
HMI_flag.home_flag = false;
- #if ENABLED(MESH_BED_LEVELING) && EITHER(BABYSTEP_ZPROBE_OFFSET, JUST_BABYSTEP)
+ #if DISABLED(HAS_BED_PROBE) && EITHER(BABYSTEP_ZPROBE_OFFSET, JUST_BABYSTEP)
planner.synchronize();
babystep.add_mm(Z_AXIS, HMI_data.ManualZOffset);
#endif
- if (HMI_flag.abort_action) DWIN_Print_Aborted(); else HMI_ReturnScreen();
+ HMI_ReturnScreen();
}
void DWIN_LevelingStart() {
- #if HAS_ONESTEP_LEVELING
+ #if HAS_BED_PROBE
HMI_SaveProcessID(Leveling);
Title.ShowCaption(GET_TEXT_F(MSG_BED_LEVELING));
DWIN_Show_Popup(ICON_AutoLeveling, GET_TEXT_F(MSG_BED_LEVELING), GET_TEXT_F(MSG_PLEASE_WAIT));
@@ -1641,10 +1502,10 @@ void DWIN_LevelingDone() {
}
#if HAS_MESH
- void DWIN_MeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) {
+ void DWIN_MeshUpdate(const int8_t cpos, const int8_t tpos, const_float_t zval) {
char msg[33] = "";
char str_1[6] = "";
- sprintf_P(msg, PSTR(S_FMT " %i/%i Z=%s"), GET_TEXT(MSG_PROBING_POINT), xpos, ypos, dtostrf(zval, 1, 2, str_1));
+ sprintf_P(msg, PSTR(S_FMT " %i/%i Z=%s"), GET_TEXT(MSG_PROBING_POINT), cpos, tpos, dtostrf(zval, 1, 2, str_1));
ui.set_status(msg);
}
#endif
@@ -1659,12 +1520,12 @@ void DWIN_LevelingDone() {
DWINUI::Draw_CenteredString(HMI_data.PopupTxt_Color, 100, GET_TEXT_F(MSG_PID_AUTOTUNE));
DWINUI::Draw_String(HMI_data.PopupTxt_Color, gfrm.x, gfrm.y - DWINUI::fontHeight() - 4, F("PID target: Celsius"));
switch (HMI_value.pidresult) {
- case PID_EXTR_START:
+ case PIDTEMP_START:
DWINUI::Draw_CenteredString(HMI_data.PopupTxt_Color, 120, F("for Nozzle is running."));
Plot.Draw(gfrm, thermalManager.hotend_maxtemp[0], HMI_data.HotendPidT);
DWINUI::Draw_Int(HMI_data.PopupTxt_Color, 3, gfrm.x + 90, gfrm.y - DWINUI::fontHeight() - 4, HMI_data.HotendPidT);
break;
- case PID_BED_START:
+ case PIDTEMPBED_START:
DWINUI::Draw_CenteredString(HMI_data.PopupTxt_Color, 120, F("for BED is running."));
Plot.Draw(gfrm, BED_MAXTEMP, HMI_data.BedPidT);
DWINUI::Draw_Int(HMI_data.PopupTxt_Color, 3, gfrm.x + 90, gfrm.y - DWINUI::fontHeight() - 4, HMI_data.BedPidT);
@@ -1678,7 +1539,7 @@ void DWIN_LevelingDone() {
void DWIN_PidTuning(pidresult_t result) {
HMI_value.pidresult = result;
switch (result) {
- case PID_BED_START:
+ case PIDTEMPBED_START:
HMI_SaveProcessID(PidProcess);
#if HAS_PIDPLOT
DWIN_Draw_PIDPopup();
@@ -1686,7 +1547,7 @@ void DWIN_PidTuning(pidresult_t result) {
DWIN_Draw_Popup(ICON_TempTooHigh, GET_TEXT_F(MSG_PID_AUTOTUNE), F("for BED is running."));
#endif
break;
- case PID_EXTR_START:
+ case PIDTEMP_START:
HMI_SaveProcessID(PidProcess);
#if HAS_PIDPLOT
DWIN_Draw_PIDPopup();
@@ -1717,38 +1578,35 @@ void DWIN_PidTuning(pidresult_t result) {
}
// Started a Print Job
-void DWIN_Print_Started(const bool sd) {
- sdprint = IS_SD_PRINTING() || sd;
+void DWIN_Print_Started() {
+ DEBUG_ECHOLNPGM("DWIN_Print_Started: ", SD_Printing());
+ TERN_(HAS_GCODE_PREVIEW, if (Host_Printing()) Preview_Invalidate());
_percent_done = 0;
_remain_time = 0;
HMI_flag.percent_flag = false;
HMI_flag.remain_flag = false;
HMI_flag.pause_flag = false;
- HMI_flag.pause_action = false;
HMI_flag.abort_flag = false;
- HMI_flag.abort_action = false;
- HMI_flag.print_finish = false;
+ select_print.reset();
Goto_PrintProcess();
}
// Pause a print job
void DWIN_Print_Pause() {
+ DEBUG_ECHOLNPGM("DWIN_Print_Pause");
ICON_ResumeOrPause();
}
// Resume print job
void DWIN_Print_Resume() {
- HMI_flag.pause_action = false;
+ DEBUG_ECHOLNPGM("DWIN_Print_Resume");
ICON_ResumeOrPause();
- if (printJobOngoing()) {
- LCD_MESSAGE(MSG_RESUME_PRINT);
- Goto_PrintProcess();
- }
+ LCD_MESSAGE(MSG_RESUME_PRINT);
}
// Ended print job
void DWIN_Print_Finished() {
- if (HMI_flag.abort_flag || checkkey == PrintDone) return;
+ DEBUG_ECHOLNPGM("DWIN_Print_Finished");
TERN_(POWER_LOSS_RECOVERY, if (card.isPrinting()) recovery.cancel());
HMI_flag.pause_flag = false;
wait_for_heatup = false;
@@ -1759,12 +1617,8 @@ void DWIN_Print_Finished() {
// Print was aborted
void DWIN_Print_Aborted() {
- TERN_(DEBUG_DWIN, SERIAL_ECHOLNPGM("DWIN_Print_Aborted"));
- HMI_flag.abort_action = false;
- wait_for_heatup = false;
- planner.finish_and_disable();
- thermalManager.cooldown();
- Goto_PrintDone();
+ DEBUG_ECHOLNPGM("DWIN_Print_Aborted");
+ DWIN_Print_Finished();
}
// Progress and remaining time update
@@ -1791,16 +1645,16 @@ void DWIN_M73() {
void DWIN_SetColorDefaults() {
HMI_data.Background_Color = Def_Background_Color;
- HMI_data.Cursor_color = Def_Cursor_color;
- HMI_data.TitleBg_color = Def_TitleBg_color;
- HMI_data.TitleTxt_color = Def_TitleTxt_color;
+ HMI_data.Cursor_Color = Def_Cursor_Color;
+ HMI_data.TitleBg_Color = Def_TitleBg_Color;
+ HMI_data.TitleTxt_Color = Def_TitleTxt_Color;
HMI_data.Text_Color = Def_Text_Color;
HMI_data.Selected_Color = Def_Selected_Color;
HMI_data.SplitLine_Color = Def_SplitLine_Color;
HMI_data.Highlight_Color = Def_Highlight_Color;
HMI_data.StatusBg_Color = Def_StatusBg_Color;
HMI_data.StatusTxt_Color = Def_StatusTxt_Color;
- HMI_data.PopupBg_color = Def_PopupBg_color;
+ HMI_data.PopupBg_Color = Def_PopupBg_Color;
HMI_data.PopupTxt_Color = Def_PopupTxt_Color;
HMI_data.AlertBg_Color = Def_AlertBg_Color;
HMI_data.AlertTxt_Color = Def_AlertTxt_Color;
@@ -1811,11 +1665,12 @@ void DWIN_SetColorDefaults() {
}
void DWIN_SetDataDefaults() {
+ DEBUG_ECHOLNPGM("DWIN_SetDataDefaults");
DWIN_SetColorDefaults();
DWINUI::SetColors(HMI_data.Text_Color, HMI_data.Background_Color, HMI_data.StatusBg_Color);
- TERN_(HAS_HOTEND, HMI_data.HotendPidT = PREHEAT_1_TEMP_HOTEND);
- TERN_(HAS_HEATED_BED, HMI_data.BedPidT = PREHEAT_1_TEMP_BED);
- TERN_(HAS_HOTEND, HMI_data.PidCycles = 5);
+ TERN_(PIDTEMP, HMI_data.HotendPidT = DEF_HOTENDPIDT);
+ TERN_(PIDTEMPBED, HMI_data.BedPidT = DEF_BEDPIDT);
+ TERN_(HAS_PID_HEATING, HMI_data.PidCycles = DEF_PIDCYCLES);
#if ENABLED(PREVENT_COLD_EXTRUSION)
HMI_data.ExtMinT = EXTRUDE_MINTEMP;
ApplyExtMinT();
@@ -1824,6 +1679,14 @@ void DWIN_SetDataDefaults() {
HMI_data.BedLevT = LEVELING_BED_TEMP;
#endif
TERN_(BAUD_RATE_GCODE, SetBaud250K());
+ HMI_data.FullManualTramming = false;
+ HMI_data.MediaAutoMount = ENABLED(HAS_SD_EXTENDER);
+ #if BOTH(INDIVIDUAL_AXIS_HOMING_SUBMENU, MESH_BED_LEVELING)
+ HMI_data.z_after_homing = DEF_Z_AFTER_HOMING;
+ #endif
+ #if DISABLED(HAS_BED_PROBE)
+ HMI_data.ManualZOffset = 0;
+ #endif
#if BOTH(LED_CONTROL_MENU, HAS_COLOR_LEDS)
TERN_(LED_COLOR_PRESETS, leds.set_default());
ApplyLEDColor();
@@ -1831,10 +1694,13 @@ void DWIN_SetDataDefaults() {
}
void DWIN_CopySettingsTo(char * const buff) {
+ DEBUG_ECHOLNPGM("DWIN_CopySettingsTo");
+ DEBUG_ECHOLNPGM("HMI_data: ", sizeof(HMI_data_t));
memcpy(buff, &HMI_data, eeprom_data_size);
}
void DWIN_CopySettingsFrom(const char * const buff) {
+ DEBUG_ECHOLNPGM("DWIN_CopySettingsFrom");
memcpy(&HMI_data, buff, sizeof(HMI_data_t));
if (HMI_data.Text_Color == HMI_data.Background_Color) DWIN_SetColorDefaults();
DWINUI::SetColors(HMI_data.Text_Color, HMI_data.Background_Color, HMI_data.StatusBg_Color);
@@ -1855,22 +1721,25 @@ void DWIN_CopySettingsFrom(const char * const buff) {
// Initialize or re-initialize the LCD
void MarlinUI::init_lcd() {
- TERN_(DEBUG_DWIN, SERIAL_ECHOLNPGM("DWIN_Startup"));
- DWINUI::init();
+ DEBUG_ECHOLNPGM("MarlinUI::init_lcd");
+ delay(750); // wait to wakeup screen
+ const bool hs = DWIN_Handshake(); UNUSED(hs);
+ DEBUG_ECHOPGM("DWIN_Handshake ");
+ DEBUG_ECHOLNF(hs ? F("ok.") : F("error."));
+ DWIN_Frame_SetDir(1);
DWIN_JPG_CacheTo1(Language_English);
Encoder_Configuration();
}
void DWIN_InitScreen() {
+ DEBUG_ECHOLNPGM("DWIN_InitScreen");
+ DWIN_SetColorDefaults();
HMI_Init(); // draws boot screen
- onCursorDraw = Draw_Menu_Cursor;
- onCursorErase = Erase_Menu_Cursor;
+ DWINUI::init();
+ DWINUI::SetColors(HMI_data.Text_Color, HMI_data.Background_Color, HMI_data.StatusBg_Color);
DWINUI::onTitleDraw = Draw_Title;
- onMenuDraw = Draw_Menu;
+ InitMenu();
checkkey = 255;
- CurrentMenu = nullptr;
- PreviousMenu = nullptr;
- index_file = MROWS;
hash_changed = true;
last_E = 0;
DWIN_DrawStatusLine();
@@ -1925,12 +1794,12 @@ void DWIN_RedrawScreen() {
//if (mode == PAUSE_MODE_SAME) return;
pause_mode = mode;
switch (message) {
- case PAUSE_MESSAGE_PARKING: DWIN_Popup_Pause(GET_TEXT_F(MSG_PAUSE_PRINT_PARKING)); break; // M125
- case PAUSE_MESSAGE_CHANGING: DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_INIT)); break; // pause_print (M125, M600)
+ case PAUSE_MESSAGE_PARKING: DWIN_Popup_Pause(GET_TEXT_F(MSG_PAUSE_PRINT_PARKING)); break; // M125
+ case PAUSE_MESSAGE_CHANGING: DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_INIT)); break; // pause_print (M125, M600)
case PAUSE_MESSAGE_WAITING: DWIN_Popup_Pause(GET_TEXT_F(MSG_ADVANCED_PAUSE_WAITING), BTN_Continue); break;
case PAUSE_MESSAGE_INSERT: DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_INSERT), BTN_Continue); break;
case PAUSE_MESSAGE_LOAD: DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_LOAD)); break;
- case PAUSE_MESSAGE_UNLOAD: DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_UNLOAD)); break; // Unload of pause and Unload of M702
+ case PAUSE_MESSAGE_UNLOAD: DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_UNLOAD)); break; // Unload of pause and Unload of M702
case PAUSE_MESSAGE_PURGE:
#if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE)
DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_CONT_PURGE));
@@ -1942,7 +1811,7 @@ void DWIN_RedrawScreen() {
case PAUSE_MESSAGE_RESUME: DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_RESUME)); break;
case PAUSE_MESSAGE_HEAT: DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_HEAT), BTN_Continue); break;
case PAUSE_MESSAGE_HEATING: DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_HEATING)); break;
- case PAUSE_MESSAGE_STATUS: HMI_ReturnScreen(); break; // Exit from Pause, Load and Unload
+ case PAUSE_MESSAGE_STATUS: HMI_ReturnScreen(); break; // Exit from Pause, Load and Unload
default: break;
}
}
@@ -1955,13 +1824,13 @@ void DWIN_RedrawScreen() {
}
void onClick_FilamentPurge() {
- if (HMI_flag.select_flag)
- pause_menu_response = PAUSE_RESPONSE_EXTRUDE_MORE; // "Purge More" button
- else {
- HMI_SaveProcessID(NothingToDo);
- pause_menu_response = PAUSE_RESPONSE_RESUME_PRINT; // "Continue" button
- }
+ if (HMI_flag.select_flag)
+ pause_menu_response = PAUSE_RESPONSE_EXTRUDE_MORE; // "Purge More" button
+ else {
+ HMI_SaveProcessID(NothingToDo);
+ pause_menu_response = PAUSE_RESPONSE_RESUME_PRINT; // "Continue" button
}
+ }
void Goto_FilamentPurge() {
pause_menu_response = PAUSE_RESPONSE_WAIT_FOR;
@@ -2011,15 +1880,14 @@ void DWIN_RedrawScreen() {
#if HAS_GCODE_PREVIEW
void onClick_ConfirmToPrint() {
+ Preview_Reset();
+ DWIN_ResetStatusLine();
if (HMI_flag.select_flag) { // Confirm
- card.openAndPrintFile(card.filename);
- return DWIN_Print_Started(true);
- }
- else { // Cancel
- DWIN_ResetStatusLine();
- checkkey = SelectFile;
- return Draw_Print_File_Menu();
+ HMI_flag.heat_flag = true;
+ Goto_Main_Menu();
+ return card.openAndPrintFile(card.filename);
}
+ else HMI_ReturnScreen();
}
void Goto_ConfirmToPrint() {
@@ -2028,8 +1896,9 @@ void DWIN_RedrawScreen() {
#else
void Goto_ConfirmToPrint() {
+ // Print SD file
+ HMI_flag.heat_flag = true;
card.openAndPrintFile(card.filename);
- DWIN_Print_Started(true);
}
#endif
@@ -2048,8 +1917,7 @@ void DWIN_RedrawScreen() {
#if ENABLED(EEPROM_SETTINGS)
void WriteEeprom() {
- ui.set_status(GET_TEXT_F(MSG_STORE_EEPROM));
- DWIN_DrawStatusLine();
+ DWIN_DrawStatusLine(GET_TEXT_F(MSG_STORE_EEPROM));
DWIN_UpdateLCD();
DONE_BUZZ(settings.save());
}
@@ -2086,13 +1954,6 @@ void Goto_Info_Menu() {
HMI_SaveProcessID(WaitResponse);
}
-void Goto_Move_Menu() {
- #if HAS_HOTEND
- gcode.process_subcommands_now(F("G92E0")); // reset extruder position
- #endif
- Draw_Move_Menu();
-}
-
void DisableMotors() { queue.inject(F("M84")); }
void AutoLev() { // Always reacquire the Z "home" position
@@ -2100,15 +1961,22 @@ void AutoLev() { // Always reacquire the Z "home" position
}
void AutoHome() { queue.inject_P(G28_STR); }
-void HomeX() { queue.inject(F("G28X")); }
-void HomeY() { queue.inject(F("G28Y")); }
-void HomeZ() { queue.inject(F("G28Z")); }
+
+#if ENABLED(INDIVIDUAL_AXIS_HOMING_SUBMENU)
+ void HomeX() { queue.inject(F("G28X")); }
+ void HomeY() { queue.inject(F("G28Y")); }
+ void HomeZ() { queue.inject(F("G28Z")); }
+ #if BOTH(INDIVIDUAL_AXIS_HOMING_SUBMENU, MESH_BED_LEVELING)
+ void ApplyZAfterHoming() { HMI_data.z_after_homing = MenuData.Value; };
+ void SetZAfterHoming() { SetIntOnClick(0, 20, HMI_data.z_after_homing, ApplyZAfterHoming); }
+ #endif
+#endif
#if HAS_HOME_OFFSET
// Apply workspace offset, making the current position 0,0,0
void SetHome() {
- queue.inject(F("G92X0Y0Z0"));
- DONE_BUZZ(true);
+ queue.inject(F("G92X0Y0Z0"));
+ DONE_BUZZ(true);
}
#endif
@@ -2119,15 +1987,15 @@ void HomeZ() { queue.inject(F("G28Z")); }
#if EITHER(BABYSTEP_ZPROBE_OFFSET, JUST_BABYSTEP)
const_float_t step_zoffset = round((MenuData.Value / 100.0f) * planner.settings.axis_steps_per_mm[Z_AXIS]) - babystep.accum;
if (BABYSTEP_ALLOWED()) babystep.add_steps(Z_AXIS, step_zoffset);
+ //DEBUG_ECHOLNF(F("BB Steps: "), step_zoffset);
#endif
}
-
- #if EITHER(BABYSTEP_ZPROBE_OFFSET, JUST_BABYSTEP)
- void SetZOffset() {
+ void SetZOffset() {
+ #if EITHER(BABYSTEP_ZPROBE_OFFSET, JUST_BABYSTEP)
babystep.accum = round(planner.settings.axis_steps_per_mm[Z_AXIS] * BABY_Z_VAR);
- SetPFloatOnClick(Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX, 2, ApplyZOffset, LiveZOffset);
- }
- #endif
+ #endif
+ SetPFloatOnClick(Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX, 2, ApplyZOffset, LiveZOffset);
+ }
void SetMoveZto0() {
#if ENABLED(Z_SAFE_HOMING)
@@ -2139,7 +2007,7 @@ void HomeZ() { queue.inject(F("G28Z")); }
gcode.process_subcommands_now(cmd);
#else
TERN_(HAS_LEVELING, set_bed_leveling_enabled(false));
- gcode.process_subcommands_now(F("G28O\nG0Z0F300\nM400"));
+ gcode.process_subcommands_now(F("G28Z\nG0Z0F300\nM400"));
#endif
ui.reset_status();
DONE_BUZZ(true);
@@ -2155,13 +2023,9 @@ void HomeZ() { queue.inject(F("G28Z")); }
#endif // HAS_ZOFFSET_ITEM
#if HAS_PREHEAT
- void DoPreheat0() { ui.preheat_all(0); }
- #if PREHEAT_COUNT >= 2
- void DoPreheat1() { ui.preheat_all(1); }
- #if PREHEAT_COUNT >= 3
- void DoPreheat2() { ui.preheat_all(2); }
- #endif
- #endif
+ #define _DoPreheat(N) void DoPreheat##N() { ui.preheat_all(N-1); }\
+ void DoPreheatHotend##N() { ui.preheat_hotend(N-1); }
+ REPEAT_1(PREHEAT_COUNT, _DoPreheat)
#endif
void DoCoolDown() { thermalManager.cooldown(); }
@@ -2172,31 +2036,29 @@ void SetLanguage() {
Draw_Prepare_Menu();
}
+bool EnableLiveMove = false;
+void SetLiveMove() { Toogle_Chkb_Line(EnableLiveMove); }
void LiveMove() {
+ planner.synchronize();
+ if (!EnableLiveMove) return;
*MenuData.P_Float = MenuData.Value / MINUNITMULT;
- if (!planner.is_full()) {
- planner.synchronize();
- planner.buffer_line(current_position, homing_feedrate(HMI_value.axis));
- }
+ if (!planner.is_full()) planner.buffer_line(current_position, manual_feedrate_mm_s[HMI_value.axis]);
}
-void ApplyMoveE() {
- last_E = MenuData.Value / MINUNITMULT;
- if (!planner.is_full()) {
- planner.synchronize();
- planner.buffer_line(current_position, MMM_TO_MMS(FEEDRATE_E));
- }
+void ApplyMove() {
+ planner.synchronize();
+ if (EnableLiveMove) return;
+ if (HMI_value.axis == E_AXIS) last_E = MenuData.Value / MINUNITMULT;
+ if (!planner.is_full()) planner.buffer_line(current_position, manual_feedrate_mm_s[HMI_value.axis]);
}
-void SetMoveX() { HMI_value.axis = X_AXIS; SetPFloatOnClick(X_MIN_POS, X_MAX_POS, UNITFDIGITS, planner.synchronize, LiveMove); }
-void SetMoveY() { HMI_value.axis = Y_AXIS; SetPFloatOnClick(Y_MIN_POS, Y_MAX_POS, UNITFDIGITS, planner.synchronize, LiveMove); }
-void SetMoveZ() { HMI_value.axis = Z_AXIS; SetPFloatOnClick(Z_MIN_POS, Z_MAX_POS, UNITFDIGITS, planner.synchronize, LiveMove); }
+
+void SetMoveX() { HMI_value.axis = X_AXIS; SetPFloatOnClick(X_MIN_POS, X_MAX_POS, UNITFDIGITS, ApplyMove, LiveMove); }
+void SetMoveY() { HMI_value.axis = Y_AXIS; SetPFloatOnClick(Y_MIN_POS, Y_MAX_POS, UNITFDIGITS, ApplyMove, LiveMove); }
+void SetMoveZ() { HMI_value.axis = Z_AXIS; SetPFloatOnClick(Z_MIN_POS, Z_MAX_POS, UNITFDIGITS, ApplyMove, LiveMove); }
#if HAS_HOTEND
void SetMoveE() {
- #if ENABLED(PREVENT_COLD_EXTRUSION)
- if (thermalManager.tooColdToExtrude(0))
- return DWIN_Popup_Confirm(ICON_TempTooLow, GET_TEXT_F(MSG_HOTEND_TOO_COLD), GET_TEXT_F(MSG_PLEASE_PREHEAT));
- #endif
- SetPFloatOnClick(last_E - (EXTRUDE_MAXLENGTH), last_E + (EXTRUDE_MAXLENGTH), UNITFDIGITS, ApplyMoveE);
+ if (thermalManager.tooColdToExtrude(0)) return DWIN_Popup_Confirm(ICON_TempTooLow, GET_TEXT_F(MSG_HOTEND_TOO_COLD), GET_TEXT_F(MSG_PLEASE_PREHEAT));
+ HMI_value.axis = E_AXIS; SetPFloatOnClick(E_MIN_POS, E_MAX_POS, UNITFDIGITS, ApplyMove, LiveMove);
}
#endif
@@ -2210,18 +2072,17 @@ void SetPID(celsius_t t, heater_id_t h) {
gcode.process_subcommands_now(cmd);
thermalManager.PID_autotune(t, h, HMI_data.PidCycles, true);
}
-#if HAS_HOTEND
+#if ENABLED(PIDTEMP)
void HotendPID() { SetPID(HMI_data.HotendPidT, H_E0); }
#endif
-#if HAS_HEATED_BED
+#if ENABLED(PIDTEMPBED)
void BedPID() { SetPID(HMI_data.BedPidT, H_BED); }
#endif
#if ENABLED(POWER_LOSS_RECOVERY)
void SetPwrLossr() {
- recovery.enable(!recovery.enabled);
- Draw_Chkb_Line(CurrentMenu->line(), recovery.enabled);
- DWIN_UpdateLCD();
+ Toogle_Chkb_Line(recovery.enabled);
+ recovery.changed();
}
#endif
@@ -2246,10 +2107,8 @@ void SetPID(celsius_t t, heater_id_t h) {
#if ENABLED(CASE_LIGHT_MENU)
void SetCaseLight() {
- caselight.on = !caselight.on;
+ Toogle_Chkb_Line(caselight.on);
caselight.update_enabled();
- Draw_Chkb_Line(CurrentMenu->line(), caselight.on);
- DWIN_UpdateLCD();
}
#if ENABLED(CASELIGHT_USES_BRIGHTNESS)
void LiveCaseLightBrightness() { caselight.brightness = MenuData.Value; caselight.update_brightness(); }
@@ -2261,8 +2120,7 @@ void SetPID(celsius_t t, heater_id_t h) {
#if !BOTH(CASE_LIGHT_MENU, CASE_LIGHT_USE_NEOPIXEL)
void SetLedStatus() {
leds.toggle();
- Draw_Chkb_Line(CurrentMenu->line(), leds.lights_on);
- DWIN_UpdateLCD();
+ Show_Chkb_Line(leds.lights_on);
}
#endif
#if HAS_COLOR_LEDS
@@ -2285,9 +2143,7 @@ void SetPID(celsius_t t, heater_id_t h) {
#if ENABLED(SOUND_MENU_ITEM)
void SetEnableSound() {
- ui.sound_on = !ui.sound_on;
- Draw_Chkb_Line(CurrentMenu->line(), ui.sound_on);
- DWIN_UpdateLCD();
+ Toogle_Chkb_Line(ui.sound_on);
}
#endif
@@ -2309,11 +2165,9 @@ void SetPID(celsius_t t, heater_id_t h) {
void ProbeStow() { probe.stow(); }
void ProbeDeploy() { probe.deploy(); }
- #ifdef BLTOUCH_HS_MODE
+ #if ENABLED(BLTOUCH_HS_MODE)
void SetHSMode() {
- bltouch.high_speed_mode = !bltouch.high_speed_mode;
- Draw_Chkb_Line(CurrentMenu->line(), bltouch.high_speed_mode);
- DWIN_UpdateLCD();
+ Toogle_Chkb_Line(bltouch.high_speed_mode);
}
#endif
@@ -2322,9 +2176,7 @@ void SetPID(celsius_t t, heater_id_t h) {
#if HAS_FILAMENT_SENSOR
void SetRunoutEnable() {
runout.reset();
- runout.enabled = !runout.enabled;
- Draw_Chkb_Line(CurrentMenu->line(), runout.enabled);
- DWIN_UpdateLCD();
+ Toogle_Chkb_Line(runout.enabled);
}
#if HAS_FILAMENT_RUNOUT_DISTANCE
void ApplyRunoutDistance() { runout.set_runout_distance(MenuData.Value / MINUNITMULT); }
@@ -2342,7 +2194,7 @@ void SetPID(celsius_t t, heater_id_t h) {
void SetExtMinT() { SetPIntOnClick(MIN_ETEMP, MAX_ETEMP, ApplyExtMinT); }
#endif
-void RestoreDefaultsColors() {
+void RestoreDefaultColors() {
DWIN_SetColorDefaults();
DWINUI::SetColors(HMI_data.Text_Color, HMI_data.Background_Color, HMI_data.StatusBg_Color);
DWIN_RedrawScreen();
@@ -2362,7 +2214,7 @@ void LiveRGBColor() {
DWIN_Draw_Rectangle(1, color, 20, 315, DWIN_WIDTH - 20, 335);
}
void SetRGBColor() {
- const uint8_t color = CurrentMenu->SelectedItem()->icon;
+ const uint8_t color = static_cast(CurrentMenu->SelectedItem())->icon;
SetIntOnClick(0, (color == 1) ? 63 : 31, HMI_value.Color[color], nullptr, LiveRGBColor);
}
@@ -2399,10 +2251,12 @@ void SetSpeed() { SetPIntOnClick(MIN_PRINT_SPEED, MAX_PRINT_SPEED); }
queue.inject(F("M600 B2"));
}
- void ParkHead() {
- LCD_MESSAGE(MSG_FILAMENT_PARK_ENABLED);
- queue.inject(F("G28O\nG27"));
- }
+ #if ENABLED(NOZZLE_PARK_FEATURE)
+ void ParkHead() {
+ LCD_MESSAGE(MSG_FILAMENT_PARK_ENABLED);
+ queue.inject(F("G28O\nG27"));
+ }
+ #endif
#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
void UnloadFilament() {
@@ -2418,8 +2272,7 @@ void SetSpeed() { SetPIntOnClick(MIN_PRINT_SPEED, MAX_PRINT_SPEED); }
#endif // ADVANCED_PAUSE_FEATURE
-void ApplyFlow() { planner.refresh_e_factor(0); }
-void SetFlow() { SetPIntOnClick(MIN_PRINT_FLOW, MAX_PRINT_FLOW, ApplyFlow); }
+void SetFlow() { SetPIntOnClick(MIN_PRINT_FLOW, MAX_PRINT_FLOW, []{ planner.refresh_e_factor(0); }); }
// Bed Tramming
@@ -2585,9 +2438,7 @@ void TramC () { Tram(4); }
}
void SetManualTramming() {
- HMI_data.FullManualTramming = !HMI_data.FullManualTramming;
- Draw_Chkb_Line(CurrentMenu->line(), HMI_data.FullManualTramming);
- DWIN_UpdateLCD();
+ Toogle_Chkb_Line(HMI_data.FullManualTramming);
}
#endif // HAS_BED_PROBE
@@ -2607,7 +2458,7 @@ void TramC () { Tram(4); }
*MenuData.P_Float = MenuData.Value / POW(10, 2);
if (!planner.is_full()) {
planner.synchronize();
- planner.buffer_line(current_position, homing_feedrate(Z_AXIS));
+ planner.buffer_line(current_position, manual_feedrate_mm_s[Z_AXIS]);
}
}
void SetMMeshMoveZ() { SetPFloatOnClick(-1, 1, 2, planner.synchronize, LiveMeshMoveZ); }
@@ -2907,16 +2758,6 @@ void onDrawSteps(MenuItemClass* menuitem, int8_t line) {
onDrawPIntMenu(menuitem, line);
}
#endif
- void onDrawPLAPreheatSubMenu(MenuItemClass* menuitem, int8_t line) {
- if (HMI_IsChinese()) menuitem->SetFrame(1, 100, 89, 178, 101);
- onDrawSubMenu(menuitem,line);
- }
- #if PREHEAT_COUNT >= 2
- void onDrawABSPreheatSubMenu(MenuItemClass* menuitem, int8_t line) {
- if (HMI_IsChinese()) menuitem->SetFrame(1, 180, 89, 260, 100);
- onDrawSubMenu(menuitem,line);
- }
- #endif
#endif // HAS_PREHEAT
void onDrawSpeed(MenuItemClass* menuitem, int8_t line) {
@@ -3100,161 +2941,145 @@ void onDrawStepsZ(MenuItemClass* menuitem, int8_t line) {
// Menu Creation and Drawing functions ======================================================
-void SetMenuTitle(frame_rect_t cn, const __FlashStringHelper* fstr) {
- if (HMI_IsChinese() && (cn.w != 0))
- CurrentMenu->MenuTitle.SetFrame(cn.x, cn.y, cn.w, cn.h);
+frame_rect_t selrect(frame_rect_t) {
+ if (HMI_IsChinese())
+ return {133, 1, 28, 13};
else
- CurrentMenu->MenuTitle.SetCaption(fstr);
+ return{0};
}
void Draw_Prepare_Menu() {
checkkey = Menu;
- if (!PrepareMenu) PrepareMenu = new MenuClass();
- if (CurrentMenu != PrepareMenu) {
- CurrentMenu = PrepareMenu;
- SetMenuTitle({133, 1, 28, 13}, GET_TEXT_F(MSG_PREPARE));
- MenuItemsPrepare(13);
+ if (SET_MENU_R(PrepareMenu, selrect({133, 1, 28, 13}), MSG_PREPARE, 10 + PREHEAT_COUNT)) {
BACK_ITEM(Goto_Main_Menu);
#if ENABLED(ADVANCED_PAUSE_FEATURE)
- MENU_ITEM_F(ICON_FilMan, MSG_FILAMENT_MAN, onDrawSubMenu, Draw_FilamentMan_Menu);
+ MENU_ITEM(ICON_FilMan, MSG_FILAMENT_MAN, onDrawSubMenu, Draw_FilamentMan_Menu);
#endif
- MENU_ITEM_F(ICON_Axis, MSG_MOVE_AXIS, onDrawMoveSubMenu, Goto_Move_Menu);
- MENU_ITEM_F(ICON_Tram, MSG_BED_TRAMMING, onDrawSubMenu, Draw_Tramming_Menu);
- MENU_ITEM_F(ICON_CloseMotor, MSG_DISABLE_STEPPERS, onDrawDisableMotors, DisableMotors);
+ MENU_ITEM(ICON_Axis, MSG_MOVE_AXIS, onDrawMoveSubMenu, Draw_Move_Menu);
+ MENU_ITEM(ICON_Tram, MSG_BED_TRAMMING, onDrawSubMenu, Draw_Tramming_Menu);
+ MENU_ITEM(ICON_CloseMotor, MSG_DISABLE_STEPPERS, onDrawDisableMotors, DisableMotors);
#if ENABLED(INDIVIDUAL_AXIS_HOMING_SUBMENU)
- MENU_ITEM_F(ICON_Homing, MSG_HOMING, onDrawSubMenu, Draw_Homing_Menu);
+ MENU_ITEM(ICON_Homing, MSG_HOMING, onDrawSubMenu, Draw_Homing_Menu);
#else
- MENU_ITEM_F(ICON_Homing, MSG_AUTO_HOME, onDrawAutoHome, AutoHome);
+ MENU_ITEM(ICON_Homing, MSG_AUTO_HOME, onDrawAutoHome, AutoHome);
#endif
#if ENABLED(MESH_BED_LEVELING)
- MENU_ITEM_F(ICON_ManualMesh, MSG_MANUAL_MESH, onDrawSubMenu, Draw_ManualMesh_Menu);
- #endif
- #if HAS_ONESTEP_LEVELING
- MENU_ITEM_F(ICON_Level, MSG_AUTO_MESH, onDrawMenuItem, AutoLev);
+ MENU_ITEM(ICON_ManualMesh, MSG_MANUAL_MESH, onDrawSubMenu, Draw_ManualMesh_Menu);
+ #elif HAS_BED_PROBE
+ MENU_ITEM(ICON_Level, MSG_AUTO_MESH, onDrawMenuItem, AutoLev);
#endif
#if HAS_ZOFFSET_ITEM
- #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
- MENU_ITEM_F(ICON_SetZOffset, MSG_PROBE_WIZARD, onDrawSubMenu, Draw_ZOffsetWiz_Menu);
- #elif JUST_BABYSTEP
- EDIT_ITEM_F(ICON_Zoffset, MSG_ZPROBE_ZOFFSET, onDrawPFloat2Menu, SetZOffset, &BABY_Z_VAR);
- #else
- MENU_ITEM_F(ICON_SetHome, MSG_SET_HOME_OFFSETS, onDrawHomeOffset, SetHome);
+ #if HAS_BED_PROBE
+ MENU_ITEM(ICON_SetZOffset, MSG_PROBE_WIZARD, onDrawSubMenu, Draw_ZOffsetWiz_Menu);
+ #elif ENABLED(BABYSTEPPING)
+ EDIT_ITEM(ICON_Zoffset, MSG_HOME_OFFSET_Z, onDrawPFloat2Menu, SetZOffset, &BABY_Z_VAR);
+ #elif HAS_HOME_OFFSET
+ MENU_ITEM(ICON_SetHome, MSG_SET_HOME_OFFSETS, onDrawHomeOffset, SetHome);
#endif
#endif
#if HAS_PREHEAT
- MENU_ITEM_F(ICON_PLAPreheat, MSG_PREHEAT_1, onDrawPreheat1, DoPreheat0);
- #if PREHEAT_COUNT > 1
- MENU_ITEM(ICON_ABSPreheat, F("Preheat " PREHEAT_2_LABEL), onDrawPreheat2, DoPreheat1);
- #if PREHEAT_COUNT > 2
- MENU_ITEM(ICON_CustomPreheat, F("Preheat " PREHEAT_3_LABEL), onDrawMenuItem, DoPreheat2);
- #endif
- #endif
+ #define _ITEM_PREHEAT(N) MENU_ITEM(ICON_Preheat##N, MSG_PREHEAT_##N, onDrawMenuItem, DoPreheat##N);
+ REPEAT_1(PREHEAT_COUNT, _ITEM_PREHEAT)
#endif
- MENU_ITEM_F(ICON_Cool, MSG_COOLDOWN, onDrawCooldown, DoCoolDown);
- MENU_ITEM_F(ICON_Language, MSG_UI_LANGUAGE, onDrawLanguage, SetLanguage);
+ MENU_ITEM(ICON_Cool, MSG_COOLDOWN, onDrawCooldown, DoCoolDown);
+ MENU_ITEM(ICON_Language, MSG_UI_LANGUAGE, onDrawLanguage, SetLanguage);
}
ui.reset_status(true);
- CurrentMenu->draw();
+ UpdateMenu(PrepareMenu);
}
void Draw_Tramming_Menu() {
checkkey = Menu;
- if (SetMenu(TrammingMenu, GET_TEXT_F(MSG_BED_TRAMMING), 8)) {
+ if (SET_MENU(TrammingMenu, MSG_BED_TRAMMING, 8)) {
BACK_ITEM(Draw_Prepare_Menu);
#if HAS_BED_PROBE
- MENU_ITEM_F(ICON_ProbeSet, MSG_TRAMMING_WIZARD, onDrawMenuItem, Trammingwizard);
- EDIT_ITEM_F(ICON_ProbeSet, MSG_BED_TRAMMING_MANUAL, onDrawChkbMenu, SetManualTramming, &HMI_data.FullManualTramming);
+ MENU_ITEM(ICON_ProbeSet, MSG_TRAMMING_WIZARD, onDrawMenuItem, Trammingwizard);
+ EDIT_ITEM(ICON_ProbeSet, MSG_BED_TRAMMING_MANUAL, onDrawChkbMenu, SetManualTramming, &HMI_data.FullManualTramming);
#else
- MENU_ITEM(ICON_MoveZ0, F("Home Z and disable"), onDrawMenuItem, HomeZandDisable);
+ MENU_ITEM_F(ICON_MoveZ0, "Home Z and disable", onDrawMenuItem, HomeZandDisable);
#endif
- MENU_ITEM_F(ICON_Axis, MSG_LEVBED_FL, onDrawMenuItem, TramFL);
- MENU_ITEM_F(ICON_Axis, MSG_LEVBED_FR, onDrawMenuItem, TramFR);
- MENU_ITEM_F(ICON_Axis, MSG_LEVBED_BR, onDrawMenuItem, TramBR);
- MENU_ITEM_F(ICON_Axis, MSG_LEVBED_BL, onDrawMenuItem, TramBL);
- MENU_ITEM(ICON_Axis, GET_TEXT_F(MSG_LEVBED_C ), onDrawMenuItem, TramC );
+ MENU_ITEM(ICON_Axis, MSG_LEVBED_FL, onDrawMenuItem, TramFL);
+ MENU_ITEM(ICON_Axis, MSG_LEVBED_FR, onDrawMenuItem, TramFR);
+ MENU_ITEM(ICON_Axis, MSG_LEVBED_BR, onDrawMenuItem, TramBR);
+ MENU_ITEM(ICON_Axis, MSG_LEVBED_BL, onDrawMenuItem, TramBL);
+ MENU_ITEM(ICON_Axis, MSG_LEVBED_C, onDrawMenuItem, TramC );
}
UpdateMenu(TrammingMenu);
}
void Draw_Control_Menu() {
checkkey = Menu;
- if (!ControlMenu) ControlMenu = new MenuClass();
- if (CurrentMenu != ControlMenu) {
- CurrentMenu = ControlMenu;
- SetMenuTitle({103, 1, 28, 14}, GET_TEXT_F(MSG_CONTROL));
- MenuItemsPrepare(10);
+ if (SET_MENU_R(ControlMenu, selrect({103, 1, 28, 14}), MSG_CONTROL, 10)) {
BACK_ITEM(Goto_Main_Menu);
- MENU_ITEM_F(ICON_Temperature, MSG_TEMPERATURE, onDrawTempSubMenu, Draw_Temperature_Menu);
- MENU_ITEM_F(ICON_Motion, MSG_MOTION, onDrawMotionSubMenu, Draw_Motion_Menu);
+ MENU_ITEM(ICON_Temperature, MSG_TEMPERATURE, onDrawTempSubMenu, Draw_Temperature_Menu);
+ MENU_ITEM(ICON_Motion, MSG_MOTION, onDrawMotionSubMenu, Draw_Motion_Menu);
#if ENABLED(EEPROM_SETTINGS)
- MENU_ITEM_F(ICON_WriteEEPROM, MSG_STORE_EEPROM, onDrawWriteEeprom, WriteEeprom);
- MENU_ITEM_F(ICON_ReadEEPROM, MSG_LOAD_EEPROM, onDrawReadEeprom, ReadEeprom);
- MENU_ITEM_F(ICON_ResumeEEPROM, MSG_RESTORE_DEFAULTS, onDrawResetEeprom, ResetEeprom);
+ MENU_ITEM(ICON_WriteEEPROM, MSG_STORE_EEPROM, onDrawWriteEeprom, WriteEeprom);
+ MENU_ITEM(ICON_ReadEEPROM, MSG_LOAD_EEPROM, onDrawReadEeprom, ReadEeprom);
+ MENU_ITEM(ICON_ResumeEEPROM, MSG_RESTORE_DEFAULTS, onDrawResetEeprom, ResetEeprom);
#endif
- MENU_ITEM_F(ICON_Reboot, MSG_RESET_PRINTER, onDrawMenuItem, RebootPrinter);
+ MENU_ITEM(ICON_Reboot, MSG_RESET_PRINTER, onDrawMenuItem, RebootPrinter);
#if ENABLED(CASE_LIGHT_MENU)
#if ENABLED(CASELIGHT_USES_BRIGHTNESS)
- MENU_ITEM_F(ICON_CaseLight, MSG_CASE_LIGHT, onDrawSubMenu, Draw_CaseLight_Menu);
+ MENU_ITEM(ICON_CaseLight, MSG_CASE_LIGHT, onDrawSubMenu, Draw_CaseLight_Menu);
#else
- MENU_ITEM_F(ICON_CaseLight, MSG_CASE_LIGHT, onDrawChkbMenu, SetCaseLight, &caselight.on);
+ MENU_ITEM(ICON_CaseLight, MSG_CASE_LIGHT, onDrawChkbMenu, SetCaseLight, &caselight.on);
#endif
#endif
#if ENABLED(LED_CONTROL_MENU)
- MENU_ITEM_F(ICON_LedControl, MSG_LED_CONTROL, onDrawSubMenu, Draw_LedControl_Menu);
+ MENU_ITEM(ICON_LedControl, MSG_LED_CONTROL, onDrawSubMenu, Draw_LedControl_Menu);
#endif
- MENU_ITEM_F(ICON_Info, MSG_INFO_SCREEN, onDrawInfoSubMenu, Goto_Info_Menu);
+ MENU_ITEM(ICON_Info, MSG_INFO_SCREEN, onDrawInfoSubMenu, Goto_Info_Menu);
}
ui.reset_status(true);
- CurrentMenu->draw();
+ UpdateMenu(ControlMenu);
}
void Draw_AdvancedSettings_Menu() {
checkkey = Menu;
- if (SetMenu(AdvancedSettings, GET_TEXT_F(MSG_ADVANCED_SETTINGS), 20)) {
+ if (SET_MENU(AdvancedSettings, MSG_ADVANCED_SETTINGS, 18)) {
BACK_ITEM(Goto_Main_Menu);
#if ENABLED(EEPROM_SETTINGS)
- MENU_ITEM_F(ICON_WriteEEPROM, MSG_STORE_EEPROM, onDrawMenuItem, WriteEeprom);
- #endif
- #if HAS_BED_PROBE
- MENU_ITEM_F(ICON_ProbeSet, MSG_ZPROBE_SETTINGS, onDrawSubMenu, Draw_ProbeSet_Menu);
+ MENU_ITEM(ICON_WriteEEPROM, MSG_STORE_EEPROM, onDrawMenuItem, WriteEeprom);
#endif
#if HAS_MESH
- MENU_ITEM_F(ICON_ProbeSet, MSG_MESH_LEVELING, onDrawSubMenu, Draw_MeshSet_Menu);
+ MENU_ITEM(ICON_ProbeSet, MSG_MESH_LEVELING, onDrawSubMenu, Draw_MeshSet_Menu);
#endif
- #if HAS_HOME_OFFSET
- MENU_ITEM_F(ICON_HomeOffset, MSG_SET_HOME_OFFSETS, onDrawSubMenu, Draw_HomeOffset_Menu);
+ #if HAS_BED_PROBE
+ MENU_ITEM(ICON_ProbeSet, MSG_ZPROBE_SETTINGS, onDrawSubMenu, Draw_ProbeSet_Menu);
#endif
+ MENU_ITEM(ICON_FilSet, MSG_FILAMENT_SET, onDrawSubMenu, Draw_FilSet_Menu);
#if ENABLED(PIDTEMP)
- MENU_ITEM(ICON_PIDNozzle, F(STR_HOTEND_PID " Settings"), onDrawSubMenu, Draw_HotendPID_Menu);
+ MENU_ITEM_F(ICON_PIDNozzle, STR_HOTEND_PID " Settings", onDrawSubMenu, Draw_HotendPID_Menu);
#endif
#if ENABLED(PIDTEMPBED)
- MENU_ITEM(ICON_PIDbed, F(STR_BED_PID " Settings"), onDrawSubMenu, Draw_BedPID_Menu);
- #endif
- MENU_ITEM_F(ICON_FilSet, MSG_FILAMENT_SET, onDrawSubMenu, Draw_FilSet_Menu);
- #if ENABLED(POWER_LOSS_RECOVERY)
- EDIT_ITEM_F(ICON_Pwrlossr, MSG_OUTAGE_RECOVERY, onDrawChkbMenu, SetPwrLossr, &recovery.enabled);
- #endif
- #if ENABLED(BAUD_RATE_GCODE)
- EDIT_ITEM(ICON_SetBaudRate, F("115K baud"), onDrawChkbMenu, SetBaudRate, &HMI_data.Baud115K);
- #endif
- #if HAS_LCD_BRIGHTNESS
- EDIT_ITEM_F(ICON_Brightness, MSG_BRIGHTNESS, onDrawPInt8Menu, SetBrightness, &ui.brightness);
- MENU_ITEM_F(ICON_Brightness, MSG_BRIGHTNESS_OFF, onDrawMenuItem, TurnOffBacklight);
- #endif
- MENU_ITEM_F(ICON_Scolor, MSG_COLORS_SELECT, onDrawSubMenu, Draw_SelectColors_Menu);
- #if ENABLED(SOUND_MENU_ITEM)
- EDIT_ITEM_F(ICON_Sound, MSG_SOUND_ENABLE, onDrawChkbMenu, SetEnableSound, &ui.sound_on);
+ MENU_ITEM_F(ICON_PIDBed, STR_BED_PID " Settings", onDrawSubMenu, Draw_BedPID_Menu);
#endif
#if HAS_ESDIAG
- MENU_ITEM(ICON_ESDiag, F("End-stops diag."), onDrawSubMenu, Draw_EndStopDiag);
+ MENU_ITEM_F(ICON_ESDiag, "End-stops diag.", onDrawSubMenu, Draw_EndStopDiag);
#endif
#if ENABLED(PRINTCOUNTER)
- MENU_ITEM_F(ICON_PrintStats, MSG_INFO_STATS_MENU, onDrawSubMenu, Goto_PrintStats);
- MENU_ITEM_F(ICON_PrintStatsReset, MSG_INFO_PRINT_COUNT_RESET, onDrawSubMenu, PrintStats.Reset);
+ MENU_ITEM(ICON_PrintStats, MSG_INFO_STATS_MENU, onDrawSubMenu, Goto_PrintStats);
+ MENU_ITEM(ICON_PrintStatsReset, MSG_INFO_PRINT_COUNT_RESET, onDrawSubMenu, PrintStatsReset);
#endif
#if HAS_LOCKSCREEN
- MENU_ITEM_F(ICON_Lock, MSG_LOCKSCREEN, onDrawMenuItem, DWIN_LockScreen);
+ MENU_ITEM(ICON_Lock, MSG_LOCKSCREEN, onDrawMenuItem, DWIN_LockScreen);
#endif
+ #if ENABLED(SOUND_MENU_ITEM)
+ EDIT_ITEM(ICON_Sound, MSG_SOUND_ENABLE, onDrawChkbMenu, SetEnableSound, &ui.sound_on);
+ #endif
+ #if ENABLED(POWER_LOSS_RECOVERY)
+ EDIT_ITEM(ICON_Pwrlossr, MSG_OUTAGE_RECOVERY, onDrawChkbMenu, SetPwrLossr, &recovery.enabled);
+ #endif
+ EDIT_ITEM(ICON_File, MSG_MEDIA_UPDATE, onDrawChkbMenu, SetMediaAutoMount, &HMI_data.MediaAutoMount);
+ #if ENABLED(BAUD_RATE_GCODE)
+ EDIT_ITEM_F(ICON_SetBaudRate, "115K baud", onDrawChkbMenu, SetBaudRate, &HMI_data.Baud115K);
+ #endif
+ #if HAS_LCD_BRIGHTNESS
+ EDIT_ITEM(ICON_Brightness, MSG_BRIGHTNESS, onDrawPInt8Menu, SetBrightness, &ui.brightness);
+ MENU_ITEM(ICON_Brightness, MSG_BRIGHTNESS_OFF, onDrawMenuItem, TurnOffBacklight);
+ #endif
+ MENU_ITEM(ICON_Scolor, MSG_COLORS_SELECT, onDrawSubMenu, Draw_SelectColors_Menu);
}
ui.reset_status(true);
UpdateMenu(AdvancedSettings);
@@ -3262,31 +3087,29 @@ void Draw_AdvancedSettings_Menu() {
void Draw_Move_Menu() {
checkkey = Menu;
- if (!MoveMenu) MoveMenu = new MenuClass();
- if (CurrentMenu != MoveMenu) {
- CurrentMenu = MoveMenu;
- SetMenuTitle({192, 1, 42, 14}, GET_TEXT_F(MSG_MOVE_AXIS));
- MenuItemsPrepare(5);
+ if (SET_MENU_R(MoveMenu, selrect({192, 1, 42, 14}), MSG_MOVE_AXIS, 6)) {
BACK_ITEM(Draw_Prepare_Menu);
- EDIT_ITEM_F(ICON_MoveX, MSG_MOVE_X, onDrawMoveX, SetMoveX, ¤t_position.x);
- EDIT_ITEM_F(ICON_MoveY, MSG_MOVE_Y, onDrawMoveY, SetMoveY, ¤t_position.y);
- EDIT_ITEM_F(ICON_MoveZ, MSG_MOVE_Z, onDrawMoveZ, SetMoveZ, ¤t_position.z);
+ EDIT_ITEM(ICON_Axis, MSG_LIVE_MOVE, onDrawChkbMenu, SetLiveMove, &EnableLiveMove);
+ EDIT_ITEM(ICON_MoveX, MSG_MOVE_X, onDrawMoveX, SetMoveX, ¤t_position.x);
+ EDIT_ITEM(ICON_MoveY, MSG_MOVE_Y, onDrawMoveY, SetMoveY, ¤t_position.y);
+ EDIT_ITEM(ICON_MoveZ, MSG_MOVE_Z, onDrawMoveZ, SetMoveZ, ¤t_position.z);
#if HAS_HOTEND
- EDIT_ITEM_F(ICON_Extruder, MSG_MOVE_E, onDrawMoveE, SetMoveE, ¤t_position.e);
+ gcode.process_subcommands_now(F("G92E0")); // reset extruder position
+ EDIT_ITEM(ICON_Extruder, MSG_MOVE_E, onDrawMoveE, SetMoveE, ¤t_position.e);
#endif
}
- CurrentMenu->draw();
+ UpdateMenu(MoveMenu);
if (!all_axes_trusted()) LCD_MESSAGE_F("WARNING: Current position unknown. Home axes.");
}
#if HAS_HOME_OFFSET
void Draw_HomeOffset_Menu() {
checkkey = Menu;
- if (SetMenu(HomeOffMenu, GET_TEXT_F(MSG_SET_HOME_OFFSETS), 4)) {
- BACK_ITEM(Draw_AdvancedSettings_Menu);
- EDIT_ITEM_F(ICON_HomeOffsetX, MSG_HOME_OFFSET_X, onDrawPFloatMenu, SetHomeOffsetX, &home_offset.x);
- EDIT_ITEM_F(ICON_HomeOffsetY, MSG_HOME_OFFSET_Y, onDrawPFloatMenu, SetHomeOffsetY, &home_offset.y);
- EDIT_ITEM_F(ICON_HomeOffsetZ, MSG_HOME_OFFSET_Z, onDrawPFloatMenu, SetHomeOffsetZ, &home_offset.z);
+ if (SET_MENU(HomeOffMenu, MSG_SET_HOME_OFFSETS, 4)) {
+ BACK_ITEM(Draw_PhySet_Menu);
+ EDIT_ITEM(ICON_HomeOffsetX, MSG_HOME_OFFSET_X, onDrawPFloatMenu, SetHomeOffsetX, &home_offset.x);
+ EDIT_ITEM(ICON_HomeOffsetY, MSG_HOME_OFFSET_Y, onDrawPFloatMenu, SetHomeOffsetY, &home_offset.y);
+ EDIT_ITEM(ICON_HomeOffsetZ, MSG_HOME_OFFSET_Z, onDrawPFloatMenu, SetHomeOffsetZ, &home_offset.z);
}
UpdateMenu(HomeOffMenu);
}
@@ -3295,45 +3118,44 @@ void Draw_Move_Menu() {
#if HAS_BED_PROBE
void Draw_ProbeSet_Menu() {
checkkey = Menu;
- if (SetMenu(ProbeSetMenu, GET_TEXT_F(MSG_ZPROBE_SETTINGS), 8)) {
+ if (SET_MENU(ProbeSetMenu, MSG_ZPROBE_SETTINGS, 9)) {
BACK_ITEM(Draw_AdvancedSettings_Menu);
- EDIT_ITEM_F(ICON_ProbeOffsetX, MSG_ZPROBE_XOFFSET, onDrawPFloatMenu, SetProbeOffsetX, &probe.offset.x);
- EDIT_ITEM_F(ICON_ProbeOffsetY, MSG_ZPROBE_YOFFSET, onDrawPFloatMenu, SetProbeOffsetY, &probe.offset.y);
- EDIT_ITEM_F(ICON_ProbeOffsetZ, MSG_ZPROBE_ZOFFSET, onDrawPFloat2Menu, SetProbeOffsetZ, &probe.offset.z);
+ EDIT_ITEM(ICON_ProbeOffsetX, MSG_ZPROBE_XOFFSET, onDrawPFloatMenu, SetProbeOffsetX, &probe.offset.x);
+ EDIT_ITEM(ICON_ProbeOffsetY, MSG_ZPROBE_YOFFSET, onDrawPFloatMenu, SetProbeOffsetY, &probe.offset.y);
+ EDIT_ITEM(ICON_ProbeOffsetZ, MSG_ZPROBE_ZOFFSET, onDrawPFloat2Menu, SetProbeOffsetZ, &probe.offset.z);
#if ENABLED(BLTOUCH)
- MENU_ITEM_F(ICON_ProbeStow, MSG_MANUAL_STOW, onDrawMenuItem, ProbeStow);
- MENU_ITEM_F(ICON_ProbeDeploy, MSG_MANUAL_DEPLOY, onDrawMenuItem, ProbeDeploy);
- MENU_ITEM_F(ICON_BltouchReset, MSG_BLTOUCH_RESET, onDrawMenuItem, bltouch._reset);
- #ifdef BLTOUCH_HS_MODE
- EDIT_ITEM_F(ICON_HSMode, MSG_ENABLE_HS_MODE, onDrawChkbMenu, SetHSMode, &bltouch.high_speed_mode);
+ MENU_ITEM(ICON_ProbeStow, MSG_MANUAL_STOW, onDrawMenuItem, ProbeStow);
+ MENU_ITEM(ICON_ProbeDeploy, MSG_MANUAL_DEPLOY, onDrawMenuItem, ProbeDeploy);
+ MENU_ITEM(ICON_BltouchReset, MSG_BLTOUCH_RESET, onDrawMenuItem, bltouch._reset);
+ #if ENABLED(BLTOUCH_HS_MODE)
+ EDIT_ITEM(ICON_HSMode, MSG_ENABLE_HS_MODE, onDrawChkbMenu, SetHSMode, &bltouch.high_speed_mode);
#endif
#endif
- MENU_ITEM_F(ICON_ProbeTest, MSG_M48_TEST, onDrawMenuItem, ProbeTest);
+ MENU_ITEM(ICON_ProbeTest, MSG_M48_TEST, onDrawMenuItem, ProbeTest);
}
UpdateMenu(ProbeSetMenu);
}
-
#endif
void Draw_FilSet_Menu() {
checkkey = Menu;
- if (SetMenu(FilSetMenu, GET_TEXT_F(MSG_FILAMENT_SET), 9)) {
+ if (SET_MENU(FilSetMenu, MSG_FILAMENT_SET, 9)) {
BACK_ITEM(Draw_AdvancedSettings_Menu);
#if HAS_FILAMENT_SENSOR
- EDIT_ITEM_F(ICON_Runout, MSG_RUNOUT_ENABLE, onDrawChkbMenu, SetRunoutEnable, &runout.enabled);
+ EDIT_ITEM(ICON_Runout, MSG_RUNOUT_ENABLE, onDrawChkbMenu, SetRunoutEnable, &runout.enabled);
#endif
#if HAS_FILAMENT_RUNOUT_DISTANCE
- EDIT_ITEM_F(ICON_Runout, MSG_RUNOUT_DISTANCE_MM, onDrawPFloatMenu, SetRunoutDistance, &runout.runout_distance());
+ EDIT_ITEM(ICON_Runout, MSG_RUNOUT_DISTANCE_MM, onDrawPFloatMenu, SetRunoutDistance, &runout.runout_distance());
#endif
#if ENABLED(PREVENT_COLD_EXTRUSION)
- EDIT_ITEM_F(ICON_ExtrudeMinT, MSG_EXTRUDER_MIN_TEMP, onDrawPIntMenu, SetExtMinT, &HMI_data.ExtMinT);
+ EDIT_ITEM(ICON_ExtrudeMinT, MSG_EXTRUDER_MIN_TEMP, onDrawPIntMenu, SetExtMinT, &HMI_data.ExtMinT);
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
- EDIT_ITEM_F(ICON_FilLoad, MSG_FILAMENT_LOAD, onDrawPFloatMenu, SetFilLoad, &fc_settings[0].load_length);
- EDIT_ITEM_F(ICON_FilUnload, MSG_FILAMENT_UNLOAD, onDrawPFloatMenu, SetFilUnload, &fc_settings[0].unload_length);
+ EDIT_ITEM(ICON_FilLoad, MSG_FILAMENT_LOAD, onDrawPFloatMenu, SetFilLoad, &fc_settings[0].load_length);
+ EDIT_ITEM(ICON_FilUnload, MSG_FILAMENT_UNLOAD, onDrawPFloatMenu, SetFilUnload, &fc_settings[0].unload_length);
#endif
#if ENABLED(FWRETRACT)
- MENU_ITEM_F(ICON_FWRetract, MSG_FWRETRACT, onDrawSubMenu, Draw_FWRetract_Menu);
+ MENU_ITEM(ICON_FWRetract, MSG_FWRETRACT, onDrawSubMenu, Draw_FWRetract_Menu);
#endif
}
UpdateMenu(FilSetMenu);
@@ -3341,80 +3163,80 @@ void Draw_FilSet_Menu() {
void Draw_SelectColors_Menu() {
checkkey = Menu;
- if (SetMenu(SelectColorMenu, GET_TEXT_F(MSG_COLORS_SELECT), 20)) {
+ if (SET_MENU(SelectColorMenu, MSG_COLORS_SELECT, 20)) {
BACK_ITEM(Draw_AdvancedSettings_Menu);
- MENU_ITEM_F(ICON_StockConfiguration, MSG_RESTORE_DEFAULTS, onDrawMenuItem, RestoreDefaultsColors);
- EDIT_ITEM(0, F("Screen Background"), onDrawSelColorItem, SelColor, &HMI_data.Background_Color);
- EDIT_ITEM(0, F("Cursor"), onDrawSelColorItem, SelColor, &HMI_data.Cursor_color);
- EDIT_ITEM(0, F("Title Background"), onDrawSelColorItem, SelColor, &HMI_data.TitleBg_color);
- EDIT_ITEM(0, F("Title Text"), onDrawSelColorItem, SelColor, &HMI_data.TitleTxt_color);
- EDIT_ITEM(0, F("Text"), onDrawSelColorItem, SelColor, &HMI_data.Text_Color);
- EDIT_ITEM(0, F("Selected"), onDrawSelColorItem, SelColor, &HMI_data.Selected_Color);
- EDIT_ITEM(0, F("Split Line"), onDrawSelColorItem, SelColor, &HMI_data.SplitLine_Color);
- EDIT_ITEM(0, F("Highlight"), onDrawSelColorItem, SelColor, &HMI_data.Highlight_Color);
- EDIT_ITEM(0, F("Status Background"), onDrawSelColorItem, SelColor, &HMI_data.StatusBg_Color);
- EDIT_ITEM(0, F("Status Text"), onDrawSelColorItem, SelColor, &HMI_data.StatusTxt_Color);
- EDIT_ITEM(0, F("Popup Background"), onDrawSelColorItem, SelColor, &HMI_data.PopupBg_color);
- EDIT_ITEM(0, F("Popup Text"), onDrawSelColorItem, SelColor, &HMI_data.PopupTxt_Color);
- EDIT_ITEM(0, F("Alert Background"), onDrawSelColorItem, SelColor, &HMI_data.AlertBg_Color);
- EDIT_ITEM(0, F("Alert Text"), onDrawSelColorItem, SelColor, &HMI_data.AlertTxt_Color);
- EDIT_ITEM(0, F("Percent Text"), onDrawSelColorItem, SelColor, &HMI_data.PercentTxt_Color);
- EDIT_ITEM(0, F("Bar Fill"), onDrawSelColorItem, SelColor, &HMI_data.Barfill_Color);
- EDIT_ITEM(0, F("Indicator value"), onDrawSelColorItem, SelColor, &HMI_data.Indicator_Color);
- EDIT_ITEM(0, F("Coordinate value"), onDrawSelColorItem, SelColor, &HMI_data.Coordinate_Color);
+ MENU_ITEM(ICON_StockConfiguration, MSG_RESTORE_DEFAULTS, onDrawMenuItem, RestoreDefaultColors);
+ EDIT_ITEM_F(0, "Screen Background", onDrawSelColorItem, SelColor, &HMI_data.Background_Color);
+ EDIT_ITEM_F(0, "Cursor", onDrawSelColorItem, SelColor, &HMI_data.Cursor_Color);
+ EDIT_ITEM_F(0, "Title Background", onDrawSelColorItem, SelColor, &HMI_data.TitleBg_Color);
+ EDIT_ITEM_F(0, "Title Text", onDrawSelColorItem, SelColor, &HMI_data.TitleTxt_Color);
+ EDIT_ITEM_F(0, "Text", onDrawSelColorItem, SelColor, &HMI_data.Text_Color);
+ EDIT_ITEM_F(0, "Selected", onDrawSelColorItem, SelColor, &HMI_data.Selected_Color);
+ EDIT_ITEM_F(0, "Split Line", onDrawSelColorItem, SelColor, &HMI_data.SplitLine_Color);
+ EDIT_ITEM_F(0, "Highlight", onDrawSelColorItem, SelColor, &HMI_data.Highlight_Color);
+ EDIT_ITEM_F(0, "Status Background", onDrawSelColorItem, SelColor, &HMI_data.StatusBg_Color);
+ EDIT_ITEM_F(0, "Status Text", onDrawSelColorItem, SelColor, &HMI_data.StatusTxt_Color);
+ EDIT_ITEM_F(0, "Popup Background", onDrawSelColorItem, SelColor, &HMI_data.PopupBg_Color);
+ EDIT_ITEM_F(0, "Popup Text", onDrawSelColorItem, SelColor, &HMI_data.PopupTxt_Color);
+ EDIT_ITEM_F(0, "Alert Background", onDrawSelColorItem, SelColor, &HMI_data.AlertBg_Color);
+ EDIT_ITEM_F(0, "Alert Text", onDrawSelColorItem, SelColor, &HMI_data.AlertTxt_Color);
+ EDIT_ITEM_F(0, "Percent Text", onDrawSelColorItem, SelColor, &HMI_data.PercentTxt_Color);
+ EDIT_ITEM_F(0, "Bar Fill", onDrawSelColorItem, SelColor, &HMI_data.Barfill_Color);
+ EDIT_ITEM_F(0, "Indicator value", onDrawSelColorItem, SelColor, &HMI_data.Indicator_Color);
+ EDIT_ITEM_F(0, "Coordinate value", onDrawSelColorItem, SelColor, &HMI_data.Coordinate_Color);
}
UpdateMenu(SelectColorMenu);
}
void Draw_GetColor_Menu() {
checkkey = Menu;
- if (SetMenu(GetColorMenu, GET_TEXT_F(MSG_COLORS_GET), 5)) {
+ if (SET_MENU(GetColorMenu, MSG_COLORS_GET, 5)) {
BACK_ITEM(DWIN_ApplyColor);
- MENU_ITEM_F(ICON_Cancel, MSG_BUTTON_CANCEL, onDrawMenuItem, Draw_SelectColors_Menu);
- MENU_ITEM_F(0, MSG_COLORS_RED, onDrawGetColorItem, SetRGBColor);
- MENU_ITEM_F(1, MSG_COLORS_GREEN, onDrawGetColorItem, SetRGBColor);
- MENU_ITEM_F(2, MSG_COLORS_BLUE, onDrawGetColorItem, SetRGBColor);
+ MENU_ITEM(ICON_Cancel, MSG_BUTTON_CANCEL, onDrawMenuItem, Draw_SelectColors_Menu);
+ MENU_ITEM(0, MSG_COLORS_RED, onDrawGetColorItem, SetRGBColor);
+ MENU_ITEM(1, MSG_COLORS_GREEN, onDrawGetColorItem, SetRGBColor);
+ MENU_ITEM(2, MSG_COLORS_BLUE, onDrawGetColorItem, SetRGBColor);
}
UpdateMenu(GetColorMenu);
DWIN_Draw_Rectangle(1, *MenuData.P_Int, 20, 315, DWIN_WIDTH - 20, 335);
}
#if BOTH(CASE_LIGHT_MENU, CASELIGHT_USES_BRIGHTNESS)
- void Draw_CaseLight_Menu() {
- checkkey = Menu;
- if (SetMenu(CaseLightMenu, GET_TEXT_F(MSG_CASE_LIGHT), 3)) {
- BACK_ITEM(Draw_Control_Menu);
- EDIT_ITEM_F(ICON_CaseLight, MSG_CASE_LIGHT, onDrawChkbMenu, SetCaseLight, &caselight.on);
- EDIT_ITEM_F(ICON_Brightness, MSG_CASE_LIGHT_BRIGHTNESS, onDrawPInt8Menu, SetCaseLightBrightness, &caselight.brightness);
- }
- UpdateMenu(CaseLightMenu);
+ void Draw_CaseLight_Menu() {
+ checkkey = Menu;
+ if (SET_MENU(CaseLightMenu, MSG_CASE_LIGHT, 3)) {
+ BACK_ITEM(Draw_Control_Menu);
+ EDIT_ITEM(ICON_CaseLight, MSG_CASE_LIGHT, onDrawChkbMenu, SetCaseLight, &caselight.on);
+ EDIT_ITEM(ICON_Brightness, MSG_CASE_LIGHT_BRIGHTNESS, onDrawPInt8Menu, SetCaseLightBrightness, &caselight.brightness);
}
+ UpdateMenu(CaseLightMenu);
+ }
#endif
#if ENABLED(LED_CONTROL_MENU)
void Draw_LedControl_Menu() {
checkkey = Menu;
- if (SetMenu(LedControlMenu, GET_TEXT_F(MSG_LED_CONTROL), 6)) {
+ if (SET_MENU(LedControlMenu, MSG_LED_CONTROL, 10)) {
BACK_ITEM(Draw_Control_Menu);
#if !BOTH(CASE_LIGHT_MENU, CASE_LIGHT_USE_NEOPIXEL)
- EDIT_ITEM_F(ICON_LedControl, MSG_LEDS, onDrawChkbMenu, SetLedStatus, &leds.lights_on);
+ EDIT_ITEM(ICON_LedControl, MSG_LEDS, onDrawChkbMenu, SetLedStatus, &leds.lights_on);
#endif
#if HAS_COLOR_LEDS
#if ENABLED(LED_COLOR_PRESETS)
- MENU_ITEM_F(ICON_LedControl, MSG_SET_LEDS_WHITE, onDrawMenuItem, leds.set_white);
- MENU_ITEM_F(ICON_LedControl, MSG_SET_LEDS_RED, onDrawMenuItem, leds.set_red);
- MENU_ITEM_F(ICON_LedControl, MSG_SET_LEDS_ORANGE, onDrawMenuItem, leds.set_orange);
- MENU_ITEM_F(ICON_LedControl, MSG_SET_LEDS_YELLOW, onDrawMenuItem, leds.set_yellow);
- MENU_ITEM_F(ICON_LedControl, MSG_SET_LEDS_GREEN, onDrawMenuItem, leds.set_green);
- MENU_ITEM_F(ICON_LedControl, MSG_SET_LEDS_BLUE, onDrawMenuItem, leds.set_blue);
- MENU_ITEM_F(ICON_LedControl, MSG_SET_LEDS_INDIGO, onDrawMenuItem, leds.set_indigo);
- MENU_ITEM_F(ICON_LedControl, MSG_SET_LEDS_VIOLET, onDrawMenuItem, leds.set_violet);
+ MENU_ITEM(ICON_LedControl, MSG_SET_LEDS_WHITE, onDrawMenuItem, leds.set_white);
+ MENU_ITEM(ICON_LedControl, MSG_SET_LEDS_RED, onDrawMenuItem, leds.set_red);
+ MENU_ITEM(ICON_LedControl, MSG_SET_LEDS_ORANGE, onDrawMenuItem, leds.set_orange);
+ MENU_ITEM(ICON_LedControl, MSG_SET_LEDS_YELLOW, onDrawMenuItem, leds.set_yellow);
+ MENU_ITEM(ICON_LedControl, MSG_SET_LEDS_GREEN, onDrawMenuItem, leds.set_green);
+ MENU_ITEM(ICON_LedControl, MSG_SET_LEDS_BLUE, onDrawMenuItem, leds.set_blue);
+ MENU_ITEM(ICON_LedControl, MSG_SET_LEDS_INDIGO, onDrawMenuItem, leds.set_indigo);
+ MENU_ITEM(ICON_LedControl, MSG_SET_LEDS_VIOLET, onDrawMenuItem, leds.set_violet);
#else
- EDIT_ITEM_F(ICON_LedControl, MSG_COLORS_RED, onDrawPInt8Menu, SetLEDColorR, &leds.color.r);
- EDIT_ITEM_F(ICON_LedControl, MSG_COLORS_GREEN, onDrawPInt8Menu, SetLEDColorG, &leds.color.g);
- EDIT_ITEM_F(ICON_LedControl, MSG_COLORS_BLUE, onDrawPInt8Menu, SetLEDColorB, &leds.color.b);
+ EDIT_ITEM(ICON_LedControl, MSG_COLORS_RED, onDrawPInt8Menu, SetLEDColorR, &leds.color.r);
+ EDIT_ITEM(ICON_LedControl, MSG_COLORS_GREEN, onDrawPInt8Menu, SetLEDColorG, &leds.color.g);
+ EDIT_ITEM(ICON_LedControl, MSG_COLORS_BLUE, onDrawPInt8Menu, SetLEDColorB, &leds.color.b);
#if ENABLED(HAS_WHITE_LED)
- EDIT_ITEM_F(ICON_LedControl, MSG_COLORS_WHITE, onDrawPInt8Menu, SetLEDColorW, &leds.color.w);
+ EDIT_ITEM(ICON_LedControl, MSG_COLORS_WHITE, onDrawPInt8Menu, SetLEDColorW, &leds.color.w);
#endif
#endif
#endif
@@ -3425,77 +3247,76 @@ void Draw_GetColor_Menu() {
void Draw_Tune_Menu() {
checkkey = Menu;
- if (!TuneMenu) TuneMenu = new MenuClass();
- if (CurrentMenu != TuneMenu) {
- CurrentMenu = TuneMenu;
- SetMenuTitle({73, 2, 28, 12}, GET_TEXT_F(MSG_TUNE)); // TODO: Chinese, English "Tune" JPG
- MenuItemsPrepare(16);
+ if (SET_MENU_R(TuneMenu, selrect({73, 2, 28, 12}), MSG_TUNE, 14)) {
BACK_ITEM(Goto_PrintProcess);
- EDIT_ITEM_F(ICON_Speed, MSG_SPEED, onDrawSpeedItem, SetSpeed, &feedrate_percentage);
+ EDIT_ITEM(ICON_Speed, MSG_SPEED, onDrawSpeedItem, SetSpeed, &feedrate_percentage);
#if HAS_HOTEND
- HotendTargetItem = EDIT_ITEM_F(ICON_HotendTemp, MSG_UBL_SET_TEMP_HOTEND, onDrawHotendTemp, SetHotendTemp, &thermalManager.temp_hotend[0].target);
+ HotendTargetItem = EDIT_ITEM(ICON_HotendTemp, MSG_UBL_SET_TEMP_HOTEND, onDrawHotendTemp, SetHotendTemp, &thermalManager.temp_hotend[0].target);
#endif
#if HAS_HEATED_BED
- BedTargetItem = EDIT_ITEM_F(ICON_BedTemp, MSG_UBL_SET_TEMP_BED, onDrawBedTemp, SetBedTemp, &thermalManager.temp_bed.target);
+ BedTargetItem = EDIT_ITEM(ICON_BedTemp, MSG_UBL_SET_TEMP_BED, onDrawBedTemp, SetBedTemp, &thermalManager.temp_bed.target);
#endif
#if HAS_FAN
- FanSpeedItem = EDIT_ITEM_F(ICON_FanSpeed, MSG_FAN_SPEED, onDrawFanSpeed, SetFanSpeed, &thermalManager.fan_speed[0]);
+ FanSpeedItem = EDIT_ITEM(ICON_FanSpeed, MSG_FAN_SPEED, onDrawFanSpeed, SetFanSpeed, &thermalManager.fan_speed[0]);
#endif
- #if HAS_ZOFFSET_ITEM && EITHER(BABYSTEP_ZPROBE_OFFSET, JUST_BABYSTEP)
- EDIT_ITEM_F(ICON_Zoffset, MSG_ZPROBE_ZOFFSET, onDrawZOffset, SetZOffset, &BABY_Z_VAR);
+ #if ALL(HAS_ZOFFSET_ITEM, HAS_BED_PROBE, BABYSTEPPING)
+ EDIT_ITEM(ICON_Zoffset, MSG_ZPROBE_ZOFFSET, onDrawZOffset, SetZOffset, &BABY_Z_VAR);
+ #elif ALL(HAS_ZOFFSET_ITEM, MESH_BED_LEVELING, BABYSTEPPING)
+ EDIT_ITEM(ICON_Zoffset, MSG_HOME_OFFSET_Z, onDrawPFloat2Menu, SetZOffset, &BABY_Z_VAR);
#endif
- EDIT_ITEM_F(ICON_Flow, MSG_FLOW, onDrawPIntMenu, SetFlow, &planner.flow_percentage[0]);
+ EDIT_ITEM(ICON_Flow, MSG_FLOW, onDrawPIntMenu, SetFlow, &planner.flow_percentage[0]);
#if ENABLED(ADVANCED_PAUSE_FEATURE)
- MENU_ITEM_F(ICON_FilMan, MSG_FILAMENTCHANGE, onDrawMenuItem, ChangeFilament);
+ MENU_ITEM(ICON_FilMan, MSG_FILAMENTCHANGE, onDrawMenuItem, ChangeFilament);
+ #endif
+ #if HAS_FILAMENT_SENSOR
+ EDIT_ITEM(ICON_Runout, MSG_RUNOUT_ENABLE, onDrawChkbMenu, SetRunoutEnable, &runout.enabled);
#endif
#if ENABLED(FWRETRACT)
- MENU_ITEM_F(ICON_FWRetract, MSG_FWRETRACT, onDrawSubMenu, Draw_FWRetract_Menu);
+ MENU_ITEM(ICON_FWRetract, MSG_FWRETRACT, onDrawSubMenu, Draw_FWRetract_Menu);
#endif
#if HAS_LOCKSCREEN
- MENU_ITEM_F(ICON_Lock, MSG_LOCKSCREEN, onDrawMenuItem, DWIN_LockScreen);
+ MENU_ITEM(ICON_Lock, MSG_LOCKSCREEN, onDrawMenuItem, DWIN_LockScreen);
#endif
#if HAS_LCD_BRIGHTNESS
- EDIT_ITEM_F(ICON_Brightness, MSG_BRIGHTNESS, onDrawPInt8Menu, SetBrightness, &ui.brightness);
- MENU_ITEM_F(ICON_Brightness, MSG_BRIGHTNESS_OFF, onDrawMenuItem, TurnOffBacklight);
+ EDIT_ITEM(ICON_Brightness, MSG_BRIGHTNESS, onDrawPInt8Menu, SetBrightness, &ui.brightness);
+ MENU_ITEM(ICON_Brightness, MSG_BRIGHTNESS_OFF, onDrawMenuItem, TurnOffBacklight);
#endif
#if ENABLED(CASE_LIGHT_MENU)
- EDIT_ITEM_F(ICON_CaseLight, MSG_CASE_LIGHT, onDrawChkbMenu, SetCaseLight, &caselight.on);
+ EDIT_ITEM(ICON_CaseLight, MSG_CASE_LIGHT, onDrawChkbMenu, SetCaseLight, &caselight.on);
#elif ENABLED(LED_CONTROL_MENU) && DISABLED(CASE_LIGHT_USE_NEOPIXEL)
- EDIT_ITEM_F(ICON_LedControl, MSG_LEDS, onDrawChkbMenu, SetLedStatus, &leds.lights_on);
+ EDIT_ITEM(ICON_LedControl, MSG_LEDS, onDrawChkbMenu, SetLedStatus, &leds.lights_on);
#endif
}
- CurrentMenu->draw();
+ UpdateMenu(TuneMenu);
}
void Draw_Motion_Menu() {
checkkey = Menu;
- if (!MotionMenu) MotionMenu = new MenuClass();
- if (CurrentMenu != MotionMenu) {
- CurrentMenu = MotionMenu;
- SetMenuTitle({1, 16, 28, 13}, GET_TEXT_F(MSG_MOTION)); // TODO: Chinese, English "Motion" JPG
- MenuItemsPrepare(6);
+ if (SET_MENU_R(MotionMenu, selrect({1, 16, 28, 13}), MSG_MOTION, 6)) {
BACK_ITEM(Draw_Control_Menu);
- MENU_ITEM_F(ICON_MaxSpeed, MSG_SPEED, onDrawSpeed, Draw_MaxSpeed_Menu);
- MENU_ITEM_F(ICON_MaxAccelerated, MSG_ACCELERATION, onDrawAcc, Draw_MaxAccel_Menu);
+ MENU_ITEM(ICON_MaxSpeed, MSG_SPEED, onDrawSpeed, Draw_MaxSpeed_Menu);
+ MENU_ITEM(ICON_MaxAccelerated, MSG_ACCELERATION, onDrawAcc, Draw_MaxAccel_Menu);
#if HAS_CLASSIC_JERK
- MENU_ITEM_F(ICON_MaxJerk, MSG_JERK, onDrawJerk, Draw_MaxJerk_Menu);
+ MENU_ITEM(ICON_MaxJerk, MSG_JERK, onDrawJerk, Draw_MaxJerk_Menu);
#endif
- MENU_ITEM_F(ICON_Step, MSG_STEPS_PER_MM, onDrawSteps, Draw_Steps_Menu);
- EDIT_ITEM_F(ICON_Flow, MSG_FLOW, onDrawPIntMenu, SetFlow, &planner.flow_percentage[0]);
+ MENU_ITEM(ICON_Step, MSG_STEPS_PER_MM, onDrawSteps, Draw_Steps_Menu);
+ EDIT_ITEM(ICON_Flow, MSG_FLOW, onDrawPIntMenu, SetFlow, &planner.flow_percentage[0]);
}
- CurrentMenu->draw();
+ UpdateMenu(MotionMenu);
}
#if ENABLED(ADVANCED_PAUSE_FEATURE)
void Draw_FilamentMan_Menu() {
checkkey = Menu;
- if (SetMenu(FilamentMenu, GET_TEXT_F(MSG_FILAMENT_MAN), 5)) {
+ if (SET_MENU(FilamentMenu, MSG_FILAMENT_MAN, 5)) {
BACK_ITEM(Draw_Prepare_Menu);
- MENU_ITEM_F(ICON_Park, MSG_FILAMENT_PARK_ENABLED, onDrawMenuItem, ParkHead);
- MENU_ITEM_F(ICON_FilMan, MSG_FILAMENTCHANGE, onDrawMenuItem, ChangeFilament);
+ #if ENABLED(NOZZLE_PARK_FEATURE)
+ MENU_ITEM(ICON_Park, MSG_FILAMENT_PARK_ENABLED, onDrawMenuItem, ParkHead);
+ #endif
+ MENU_ITEM(ICON_FilMan, MSG_FILAMENTCHANGE, onDrawMenuItem, ChangeFilament);
#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
- MENU_ITEM_F(ICON_FilUnload, MSG_FILAMENTUNLOAD, onDrawMenuItem, UnloadFilament);
- MENU_ITEM_F(ICON_FilLoad, MSG_FILAMENTLOAD, onDrawMenuItem, LoadFilament);
+ MENU_ITEM(ICON_FilUnload, MSG_FILAMENTUNLOAD, onDrawMenuItem, UnloadFilament);
+ MENU_ITEM(ICON_FilLoad, MSG_FILAMENTLOAD, onDrawMenuItem, LoadFilament);
#endif
}
UpdateMenu(FilamentMenu);
@@ -3505,13 +3326,13 @@ void Draw_Motion_Menu() {
#if ENABLED(MESH_BED_LEVELING)
void Draw_ManualMesh_Menu() {
checkkey = Menu;
- if (SetMenu(ManualMesh, GET_TEXT_F(MSG_UBL_MANUAL_MESH), 6)) {
+ if (SET_MENU(ManualMesh, MSG_UBL_MANUAL_MESH, 6)) {
BACK_ITEM(Draw_Prepare_Menu);
- MENU_ITEM_F(ICON_ManualMesh, MSG_LEVEL_BED, onDrawMenuItem, ManualMeshStart);
- MMeshMoveZItem = EDIT_ITEM_F(ICON_Zoffset, MSG_MOVE_Z, onDrawMMeshMoveZ, SetMMeshMoveZ, ¤t_position.z);
- MENU_ITEM_F(ICON_Axis, MSG_UBL_CONTINUE_MESH, onDrawMenuItem, ManualMeshContinue);
- MENU_ITEM_F(ICON_MeshViewer, MSG_MESH_VIEW, onDrawSubMenu, DWIN_MeshViewer);
- MENU_ITEM_F(ICON_MeshSave, MSG_UBL_SAVE_MESH, onDrawMenuItem, ManualMeshSave);
+ MENU_ITEM(ICON_ManualMesh, MSG_LEVEL_BED, onDrawMenuItem, ManualMeshStart);
+ MMeshMoveZItem = EDIT_ITEM(ICON_Zoffset, MSG_MOVE_Z, onDrawMMeshMoveZ, SetMMeshMoveZ, ¤t_position.z);
+ MENU_ITEM(ICON_Axis, MSG_UBL_CONTINUE_MESH, onDrawMenuItem, ManualMeshContinue);
+ MENU_ITEM(ICON_MeshViewer, MSG_MESH_VIEW, onDrawSubMenu, DWIN_MeshViewer);
+ MENU_ITEM(ICON_MeshSave, MSG_UBL_SAVE_MESH, onDrawMenuItem, ManualMeshSave);
}
UpdateMenu(ManualMesh);
}
@@ -3519,170 +3340,127 @@ void Draw_Motion_Menu() {
#if HAS_PREHEAT
- void Draw_Preheat_Menu(frame_rect_t cn, const __FlashStringHelper* fstr) {
+ void Draw_Preheat_Menu(bool NotCurrent) {
checkkey = Menu;
- if (CurrentMenu != PreheatMenu) {
- CurrentMenu = PreheatMenu;
- SetMenuTitle(cn, fstr);
- MenuItemsPrepare(5);
+ if (NotCurrent) {
BACK_ITEM(Draw_Temperature_Menu);
#if HAS_HOTEND
- EDIT_ITEM_F(ICON_SetEndTemp, MSG_UBL_SET_TEMP_HOTEND, onDrawSetPreheatHotend, SetPreheatEndTemp, &ui.material_preset[HMI_value.Select].hotend_temp);
+ EDIT_ITEM(ICON_SetEndTemp, MSG_UBL_SET_TEMP_HOTEND, onDrawSetPreheatHotend, SetPreheatEndTemp, &ui.material_preset[HMI_value.Select].hotend_temp);
#endif
#if HAS_HEATED_BED
- EDIT_ITEM_F(ICON_SetBedTemp, MSG_UBL_SET_TEMP_BED, onDrawSetPreheatBed, SetPreheatBedTemp, &ui.material_preset[HMI_value.Select].bed_temp);
+ EDIT_ITEM(ICON_SetBedTemp, MSG_UBL_SET_TEMP_BED, onDrawSetPreheatBed, SetPreheatBedTemp, &ui.material_preset[HMI_value.Select].bed_temp);
#endif
#if HAS_FAN
- EDIT_ITEM_F(ICON_FanSpeed, MSG_FAN_SPEED, onDrawSetPreheatFan, SetPreheatFanSpeed, &ui.material_preset[HMI_value.Select].fan_speed);
+ EDIT_ITEM(ICON_FanSpeed, MSG_FAN_SPEED, onDrawSetPreheatFan, SetPreheatFanSpeed, &ui.material_preset[HMI_value.Select].fan_speed);
#endif
#if ENABLED(EEPROM_SETTINGS)
- MENU_ITEM_F(ICON_WriteEEPROM, MSG_STORE_EEPROM, onDrawWriteEeprom, WriteEeprom);
+ MENU_ITEM(ICON_WriteEEPROM, MSG_STORE_EEPROM, onDrawWriteEeprom, WriteEeprom);
#endif
}
- CurrentMenu->draw();
+ UpdateMenu(PreheatMenu);
}
- void Draw_Preheat1_Menu() {
- HMI_value.Select = 0;
- if (!PreheatMenu) PreheatMenu = new MenuClass();
- Draw_Preheat_Menu({59, 16, 81, 14}, F(PREHEAT_1_LABEL " Preheat Settings")); // TODO: English "PLA Settings" JPG
- }
-
- #if PREHEAT_COUNT >= 2
- void Draw_Preheat2_Menu() {
- HMI_value.Select = 1;
- if (!PreheatMenu) PreheatMenu = new MenuClass();
- Draw_Preheat_Menu({142, 16, 82, 14}, F(PREHEAT_2_LABEL " Preheat Settings")); // TODO: English "ABS Settings" JPG
+ #define _Preheat_Menu(N) \
+ void Draw_Preheat## N ##_Menu() { \
+ HMI_value.Select = N-1; \
+ Draw_Preheat_Menu(SET_MENU(PreheatMenu, MSG_PREHEAT_## N ##_SETTINGS, 5)); \
}
- #endif
-
- #if PREHEAT_COUNT >= 3
- void Draw_Preheat3_Menu() {
- HMI_value.Select = 2;
- if (!PreheatMenu) PreheatMenu = new MenuClass();
- Draw_Preheat_Menu({225, 16, 82, 14}, F(PREHEAT_3_LABEL " Preheat Settings")); // TODO: English "... Settings" JPG
- }
- #endif
+ REPEAT_1(PREHEAT_COUNT, _Preheat_Menu)
#endif // HAS_PREHEAT
void Draw_Temperature_Menu() {
checkkey = Menu;
- if (!TemperatureMenu) TemperatureMenu = new MenuClass();
- if (CurrentMenu != TemperatureMenu) {
- CurrentMenu = TemperatureMenu;
- SetMenuTitle({236, 2, 28, 12}, GET_TEXT_F(MSG_TEMPERATURE));
- MenuItemsPrepare(7);
+ if (SET_MENU_R(TemperatureMenu, selrect({236, 2, 28, 12}), MSG_TEMPERATURE, 4 + PREHEAT_COUNT)) {
BACK_ITEM(Draw_Control_Menu);
#if HAS_HOTEND
- HotendTargetItem = EDIT_ITEM_F(ICON_SetEndTemp, MSG_UBL_SET_TEMP_HOTEND, onDrawHotendTemp, SetHotendTemp, &thermalManager.temp_hotend[0].target);
+ HotendTargetItem = EDIT_ITEM(ICON_SetEndTemp, MSG_UBL_SET_TEMP_HOTEND, onDrawHotendTemp, SetHotendTemp, &thermalManager.temp_hotend[0].target);
#endif
#if HAS_HEATED_BED
- BedTargetItem = EDIT_ITEM_F(ICON_SetBedTemp, MSG_UBL_SET_TEMP_BED, onDrawBedTemp, SetBedTemp, &thermalManager.temp_bed.target);
+ BedTargetItem = EDIT_ITEM(ICON_SetBedTemp, MSG_UBL_SET_TEMP_BED, onDrawBedTemp, SetBedTemp, &thermalManager.temp_bed.target);
#endif
#if HAS_FAN
- FanSpeedItem = EDIT_ITEM_F(ICON_FanSpeed, MSG_FAN_SPEED, onDrawFanSpeed, SetFanSpeed, &thermalManager.fan_speed[0]);
+ FanSpeedItem = EDIT_ITEM(ICON_FanSpeed, MSG_FAN_SPEED, onDrawFanSpeed, SetFanSpeed, &thermalManager.fan_speed[0]);
#endif
#if HAS_PREHEAT
- MENU_ITEM_F(ICON_SetPLAPreheat, MSG_PREHEAT_1_SETTINGS, onDrawPLAPreheatSubMenu, Draw_Preheat1_Menu);
- #if PREHEAT_COUNT >= 2
- MENU_ITEM_F(ICON_SetABSPreheat, MSG_PREHEAT_2_SETTINGS, onDrawABSPreheatSubMenu, Draw_Preheat2_Menu);
- #if PREHEAT_COUNT >= 3
- MENU_ITEM_F(ICON_SetCustomPreheat, MSG_PREHEAT_3_SETTINGS, onDrawSubMenu, Draw_Preheat3_Menu);
- #endif
- #endif
+ #define _ITEM_SETPREHEAT(N) MENU_ITEM(ICON_SetPreheat##N, MSG_PREHEAT_## N ##_SETTINGS, onDrawSubMenu, Draw_Preheat## N ##_Menu);
+ REPEAT_1(PREHEAT_COUNT, _ITEM_SETPREHEAT)
#endif
}
- CurrentMenu->draw();
+ UpdateMenu(TemperatureMenu);
}
void Draw_MaxSpeed_Menu() {
checkkey = Menu;
- if (!MaxSpeedMenu) MaxSpeedMenu = new MenuClass();
- if (CurrentMenu != MaxSpeedMenu) {
- CurrentMenu = MaxSpeedMenu;
- SetMenuTitle({1, 16, 28, 13}, GET_TEXT_F(MSG_MAX_SPEED));
- MenuItemsPrepare(5);
+ if (SET_MENU_R(MaxSpeedMenu, selrect({1, 16, 28, 13}), MSG_MAX_SPEED, 5)) {
BACK_ITEM(Draw_Motion_Menu);
- EDIT_ITEM_F(ICON_MaxSpeedX, MSG_VMAX_A, onDrawMaxSpeedX, SetMaxSpeedX, &planner.settings.max_feedrate_mm_s[X_AXIS]);
- EDIT_ITEM_F(ICON_MaxSpeedY, MSG_VMAX_B, onDrawMaxSpeedY, SetMaxSpeedY, &planner.settings.max_feedrate_mm_s[Y_AXIS]);
- EDIT_ITEM_F(ICON_MaxSpeedZ, MSG_VMAX_C, onDrawMaxSpeedZ, SetMaxSpeedZ, &planner.settings.max_feedrate_mm_s[Z_AXIS]);
+ EDIT_ITEM(ICON_MaxSpeedX, MSG_VMAX_A, onDrawMaxSpeedX, SetMaxSpeedX, &planner.settings.max_feedrate_mm_s[X_AXIS]);
+ EDIT_ITEM(ICON_MaxSpeedY, MSG_VMAX_B, onDrawMaxSpeedY, SetMaxSpeedY, &planner.settings.max_feedrate_mm_s[Y_AXIS]);
+ EDIT_ITEM(ICON_MaxSpeedZ, MSG_VMAX_C, onDrawMaxSpeedZ, SetMaxSpeedZ, &planner.settings.max_feedrate_mm_s[Z_AXIS]);
#if HAS_HOTEND
- EDIT_ITEM_F(ICON_MaxSpeedE, MSG_VMAX_E, onDrawMaxSpeedE, SetMaxSpeedE, &planner.settings.max_feedrate_mm_s[E_AXIS]);
+ EDIT_ITEM(ICON_MaxSpeedE, MSG_VMAX_E, onDrawMaxSpeedE, SetMaxSpeedE, &planner.settings.max_feedrate_mm_s[E_AXIS]);
#endif
}
- CurrentMenu->draw();
+ UpdateMenu(MaxSpeedMenu);
}
void Draw_MaxAccel_Menu() {
checkkey = Menu;
- if (!MaxAccelMenu) MaxAccelMenu = new MenuClass();
- if (CurrentMenu != MaxAccelMenu) {
- CurrentMenu = MaxAccelMenu;
- SetMenuTitle({1, 16, 28, 13}, GET_TEXT_F(MSG_ACCELERATION));
- MenuItemsPrepare(5);
+ if (SET_MENU_R(MaxAccelMenu, selrect({1, 16, 28, 13}), MSG_AMAX_EN, 5)) {
BACK_ITEM(Draw_Motion_Menu);
- EDIT_ITEM_F(ICON_MaxAccX, MSG_AMAX_A, onDrawMaxAccelX, SetMaxAccelX, &planner.settings.max_acceleration_mm_per_s2[X_AXIS]);
- EDIT_ITEM_F(ICON_MaxAccY, MSG_AMAX_B, onDrawMaxAccelY, SetMaxAccelY, &planner.settings.max_acceleration_mm_per_s2[Y_AXIS]);
- EDIT_ITEM_F(ICON_MaxAccZ, MSG_AMAX_C, onDrawMaxAccelZ, SetMaxAccelZ, &planner.settings.max_acceleration_mm_per_s2[Z_AXIS]);
+ EDIT_ITEM(ICON_MaxAccX, MSG_AMAX_A, onDrawMaxAccelX, SetMaxAccelX, &planner.settings.max_acceleration_mm_per_s2[X_AXIS]);
+ EDIT_ITEM(ICON_MaxAccY, MSG_AMAX_B, onDrawMaxAccelY, SetMaxAccelY, &planner.settings.max_acceleration_mm_per_s2[Y_AXIS]);
+ EDIT_ITEM(ICON_MaxAccZ, MSG_AMAX_C, onDrawMaxAccelZ, SetMaxAccelZ, &planner.settings.max_acceleration_mm_per_s2[Z_AXIS]);
#if HAS_HOTEND
- EDIT_ITEM_F(ICON_MaxAccE, MSG_AMAX_E, onDrawMaxAccelE, SetMaxAccelE, &planner.settings.max_acceleration_mm_per_s2[E_AXIS]);
+ EDIT_ITEM(ICON_MaxAccE, MSG_AMAX_E, onDrawMaxAccelE, SetMaxAccelE, &planner.settings.max_acceleration_mm_per_s2[E_AXIS]);
#endif
}
- CurrentMenu->draw();
+ UpdateMenu(MaxAccelMenu);
}
#if HAS_CLASSIC_JERK
void Draw_MaxJerk_Menu() {
checkkey = Menu;
- if (!MaxJerkMenu) MaxJerkMenu = new MenuClass();
- if (CurrentMenu != MaxJerkMenu) {
- CurrentMenu = MaxJerkMenu;
- SetMenuTitle({1, 16, 28, 13}, GET_TEXT_F(MSG_JERK));
- MenuItemsPrepare(5);
+ if (SET_MENU_R(MaxJerkMenu, selrect({1, 16, 28, 13}), MSG_JERK, 5)) {
BACK_ITEM(Draw_Motion_Menu);
- EDIT_ITEM_F(ICON_MaxSpeedJerkX, MSG_VA_JERK, onDrawMaxJerkX, SetMaxJerkX, &planner.max_jerk.x);
- EDIT_ITEM_F(ICON_MaxSpeedJerkY, MSG_VB_JERK, onDrawMaxJerkY, SetMaxJerkY, &planner.max_jerk.y);
- EDIT_ITEM_F(ICON_MaxSpeedJerkZ, MSG_VC_JERK, onDrawMaxJerkZ, SetMaxJerkZ, &planner.max_jerk.z);
+ EDIT_ITEM(ICON_MaxSpeedJerkX, MSG_VA_JERK, onDrawMaxJerkX, SetMaxJerkX, &planner.max_jerk.x);
+ EDIT_ITEM(ICON_MaxSpeedJerkY, MSG_VB_JERK, onDrawMaxJerkY, SetMaxJerkY, &planner.max_jerk.y);
+ EDIT_ITEM(ICON_MaxSpeedJerkZ, MSG_VC_JERK, onDrawMaxJerkZ, SetMaxJerkZ, &planner.max_jerk.z);
#if HAS_HOTEND
- EDIT_ITEM_F(ICON_MaxSpeedJerkE, MSG_VE_JERK, onDrawMaxJerkE, SetMaxJerkE, &planner.max_jerk.e);
+ EDIT_ITEM(ICON_MaxSpeedJerkE, MSG_VE_JERK, onDrawMaxJerkE, SetMaxJerkE, &planner.max_jerk.e);
#endif
}
- CurrentMenu->draw();
+ UpdateMenu(MaxJerkMenu);
}
#endif
void Draw_Steps_Menu() {
checkkey = Menu;
- if (!StepsMenu) StepsMenu = new MenuClass();
- if (CurrentMenu != StepsMenu) {
- CurrentMenu = StepsMenu;
- SetMenuTitle({1, 16, 28, 13}, GET_TEXT_F(MSG_STEPS_PER_MM));
- MenuItemsPrepare(5);
+ if (SET_MENU_R(StepsMenu, selrect({1, 16, 28, 13}), MSG_STEPS_PER_MM, 5)) {
BACK_ITEM(Draw_Motion_Menu);
- EDIT_ITEM_F(ICON_StepX, MSG_A_STEPS, onDrawStepsX, SetStepsX, &planner.settings.axis_steps_per_mm[X_AXIS]);
- EDIT_ITEM_F(ICON_StepY, MSG_B_STEPS, onDrawStepsY, SetStepsY, &planner.settings.axis_steps_per_mm[Y_AXIS]);
- EDIT_ITEM_F(ICON_StepZ, MSG_C_STEPS, onDrawStepsZ, SetStepsZ, &planner.settings.axis_steps_per_mm[Z_AXIS]);
+ EDIT_ITEM(ICON_StepX, MSG_A_STEPS, onDrawStepsX, SetStepsX, &planner.settings.axis_steps_per_mm[X_AXIS]);
+ EDIT_ITEM(ICON_StepY, MSG_B_STEPS, onDrawStepsY, SetStepsY, &planner.settings.axis_steps_per_mm[Y_AXIS]);
+ EDIT_ITEM(ICON_StepZ, MSG_C_STEPS, onDrawStepsZ, SetStepsZ, &planner.settings.axis_steps_per_mm[Z_AXIS]);
#if HAS_HOTEND
- EDIT_ITEM_F(ICON_StepE, MSG_E_STEPS, onDrawStepsE, SetStepsE, &planner.settings.axis_steps_per_mm[E_AXIS]);
+ EDIT_ITEM(ICON_StepE, MSG_E_STEPS, onDrawStepsE, SetStepsE, &planner.settings.axis_steps_per_mm[E_AXIS]);
#endif
}
- CurrentMenu->draw();
+ UpdateMenu(StepsMenu);
}
#if ENABLED(PIDTEMP)
void Draw_HotendPID_Menu() {
checkkey = Menu;
- if (SetMenu(HotendPIDMenu, F(STR_HOTEND_PID " Settings"), 8)) {
+ if (SET_MENU_F(HotendPIDMenu, STR_HOTEND_PID " Settings", 8)) {
BACK_ITEM(Draw_AdvancedSettings_Menu);
- MENU_ITEM(ICON_PIDNozzle, F(STR_HOTEND_PID), onDrawMenuItem, HotendPID);
- EDIT_ITEM(ICON_PIDValue, F("Set" STR_KP), onDrawPFloat2Menu, SetKp, &thermalManager.temp_hotend[0].pid.Kp);
- EDIT_ITEM(ICON_PIDValue, F("Set" STR_KI), onDrawPIDi, SetKi, &thermalManager.temp_hotend[0].pid.Ki);
- EDIT_ITEM(ICON_PIDValue, F("Set" STR_KD), onDrawPIDd, SetKd, &thermalManager.temp_hotend[0].pid.Kd);
- EDIT_ITEM_F(ICON_Temperature, MSG_TEMPERATURE, onDrawPIntMenu, SetHotendPidT, &HMI_data.HotendPidT);
- EDIT_ITEM_F(ICON_PIDcycles, MSG_PID_CYCLE, onDrawPIntMenu, SetPidCycles, &HMI_data.PidCycles);
+ MENU_ITEM_F(ICON_PIDNozzle, STR_HOTEND_PID, onDrawMenuItem, HotendPID);
+ EDIT_ITEM_F(ICON_PIDValue, "Set" STR_KP, onDrawPFloat2Menu, SetKp, &thermalManager.temp_hotend[0].pid.Kp);
+ EDIT_ITEM_F(ICON_PIDValue, "Set" STR_KI, onDrawPIDi, SetKi, &thermalManager.temp_hotend[0].pid.Ki);
+ EDIT_ITEM_F(ICON_PIDValue, "Set" STR_KD, onDrawPIDd, SetKd, &thermalManager.temp_hotend[0].pid.Kd);
+ EDIT_ITEM(ICON_Temperature, MSG_TEMPERATURE, onDrawPIntMenu, SetHotendPidT, &HMI_data.HotendPidT);
+ EDIT_ITEM(ICON_PIDCycles, MSG_PID_CYCLE, onDrawPIntMenu, SetPidCycles, &HMI_data.PidCycles);
#if ENABLED(EEPROM_SETTINGS)
- MENU_ITEM_F(ICON_WriteEEPROM, MSG_STORE_EEPROM, onDrawMenuItem, WriteEeprom);
+ MENU_ITEM(ICON_WriteEEPROM, MSG_STORE_EEPROM, onDrawMenuItem, WriteEeprom);
#endif
}
UpdateMenu(HotendPIDMenu);
@@ -3692,30 +3470,30 @@ void Draw_Steps_Menu() {
#if ENABLED(PIDTEMPBED)
void Draw_BedPID_Menu() {
checkkey = Menu;
- if (SetMenu(BedPIDMenu, F(STR_BED_PID " Settings"), 8)) {
+ if (SET_MENU_F(BedPIDMenu, STR_BED_PID " Settings", 8)) {
BACK_ITEM(Draw_AdvancedSettings_Menu);
- MENU_ITEM(ICON_PIDNozzle, F(STR_BED_PID), onDrawMenuItem,BedPID);
- EDIT_ITEM(ICON_PIDValue, F("Set" STR_KP), onDrawPFloat2Menu, SetKp, &thermalManager.temp_bed.pid.Kp);
- EDIT_ITEM(ICON_PIDValue, F("Set" STR_KI), onDrawPIDi, SetKi, &thermalManager.temp_bed.pid.Ki);
- EDIT_ITEM(ICON_PIDValue, F("Set" STR_KD), onDrawPIDd, SetKd, &thermalManager.temp_bed.pid.Kd);
- EDIT_ITEM_F(ICON_Temperature, MSG_TEMPERATURE, onDrawPIntMenu, SetBedPidT, &HMI_data.BedPidT);
- EDIT_ITEM_F(ICON_PIDcycles, MSG_PID_CYCLE, onDrawPIntMenu, SetPidCycles, &HMI_data.PidCycles);
+ MENU_ITEM_F(ICON_PIDBed, STR_BED_PID, onDrawMenuItem,BedPID);
+ EDIT_ITEM_F(ICON_PIDValue, "Set" STR_KP, onDrawPFloat2Menu, SetKp, &thermalManager.temp_bed.pid.Kp);
+ EDIT_ITEM_F(ICON_PIDValue, "Set" STR_KI, onDrawPIDi, SetKi, &thermalManager.temp_bed.pid.Ki);
+ EDIT_ITEM_F(ICON_PIDValue, "Set" STR_KD, onDrawPIDd, SetKd, &thermalManager.temp_bed.pid.Kd);
+ EDIT_ITEM(ICON_Temperature, MSG_TEMPERATURE, onDrawPIntMenu, SetBedPidT, &HMI_data.BedPidT);
+ EDIT_ITEM(ICON_PIDCycles, MSG_PID_CYCLE, onDrawPIntMenu, SetPidCycles, &HMI_data.PidCycles);
#if ENABLED(EEPROM_SETTINGS)
- MENU_ITEM_F(ICON_WriteEEPROM, MSG_STORE_EEPROM, onDrawMenuItem, WriteEeprom);
+ MENU_ITEM(ICON_WriteEEPROM, MSG_STORE_EEPROM, onDrawMenuItem, WriteEeprom);
#endif
}
UpdateMenu(BedPIDMenu);
}
#endif
-#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
+#if HAS_BED_PROBE
void Draw_ZOffsetWiz_Menu() {
checkkey = Menu;
- if (SetMenu(ZOffsetWizMenu, GET_TEXT_F(MSG_PROBE_WIZARD), 4)) {
+ if (SET_MENU(ZOffsetWizMenu, MSG_PROBE_WIZARD, 4)) {
BACK_ITEM(Draw_Prepare_Menu);
- MENU_ITEM_F(ICON_Homing, MSG_AUTO_HOME, onDrawMenuItem, AutoHome);
- MENU_ITEM(ICON_MoveZ0, F("Move Z to Home"), onDrawMenuItem, SetMoveZto0);
- EDIT_ITEM_F(ICON_Zoffset, MSG_ZPROBE_ZOFFSET, onDrawPFloat2Menu, SetZOffset, &BABY_Z_VAR);
+ MENU_ITEM(ICON_Homing, MSG_AUTO_HOME, onDrawMenuItem, AutoHome);
+ MENU_ITEM_F(ICON_MoveZ0, "Move Z to Home", onDrawMenuItem, SetMoveZto0);
+ EDIT_ITEM(ICON_Zoffset, MSG_ZPROBE_ZOFFSET, onDrawPFloat2Menu, SetZOffset, &BABY_Z_VAR);
}
UpdateMenu(ZOffsetWizMenu);
if (!axis_is_trusted(Z_AXIS)) LCD_MESSAGE_F("WARNING: Z position unknown, move Z to home");
@@ -3725,12 +3503,15 @@ void Draw_Steps_Menu() {
#if ENABLED(INDIVIDUAL_AXIS_HOMING_SUBMENU)
void Draw_Homing_Menu() {
checkkey = Menu;
- if (SetMenu(HomingMenu, GET_TEXT_F(MSG_HOMING), 5)) {
+ if (SET_MENU(HomingMenu, MSG_HOMING, 6)) {
BACK_ITEM(Draw_Prepare_Menu);
- MENU_ITEM_F(ICON_Homing, MSG_AUTO_HOME, onDrawMenuItem, AutoHome);
- MENU_ITEM_F(ICON_HomeX, MSG_AUTO_HOME_X, onDrawMenuItem, HomeX);
- MENU_ITEM_F(ICON_HomeY, MSG_AUTO_HOME_Y, onDrawMenuItem, HomeY);
- MENU_ITEM_F(ICON_HomeZ, MSG_AUTO_HOME_Z, onDrawMenuItem, HomeZ);
+ MENU_ITEM(ICON_Homing, MSG_AUTO_HOME, onDrawMenuItem, AutoHome);
+ MENU_ITEM(ICON_HomeX, MSG_AUTO_HOME_X, onDrawMenuItem, HomeX);
+ MENU_ITEM(ICON_HomeY, MSG_AUTO_HOME_Y, onDrawMenuItem, HomeY);
+ MENU_ITEM(ICON_HomeZ, MSG_AUTO_HOME_Z, onDrawMenuItem, HomeZ);
+ #if ENABLED(MESH_BED_LEVELING)
+ EDIT_ITEM(ICON_ZAfterHome, MSG_Z_AFTER_HOME, onDrawPInt8Menu, SetZAfterHoming, &HMI_data.z_after_homing);
+ #endif
}
UpdateMenu(HomingMenu);
}
@@ -3739,13 +3520,13 @@ void Draw_Steps_Menu() {
#if ENABLED(FWRETRACT)
void Draw_FWRetract_Menu() {
checkkey = Menu;
- if (SetMenu(FWRetractMenu, GET_TEXT_F(MSG_FWRETRACT), 6)) {
+ if (SET_MENU(FWRetractMenu, MSG_FWRETRACT, 6)) {
BACK_ITEM(Return_FWRetract_Menu);
- EDIT_ITEM_F(ICON_FWRetLength, MSG_CONTROL_RETRACT, onDrawPFloatMenu, SetRetractLength, &fwretract.settings.retract_length);
- EDIT_ITEM_F(ICON_FWRetSpeed, MSG_SINGLENOZZLE_RETRACT_SPEED, onDrawPFloatMenu, SetRetractSpeed, &fwretract.settings.retract_feedrate_mm_s);
- EDIT_ITEM_F(ICON_FWRetZRaise, MSG_CONTROL_RETRACT_ZHOP, onDrawPFloat2Menu, SetZRaise, &fwretract.settings.retract_zraise);
- EDIT_ITEM_F(ICON_FWRecSpeed, MSG_SINGLENOZZLE_UNRETRACT_SPEED, onDrawPFloatMenu, SetRecoverSpeed, &fwretract.settings.retract_recover_feedrate_mm_s);
- EDIT_ITEM_F(ICON_FWRecExtra, MSG_CONTROL_RETRACT_RECOVER, onDrawPFloatMenu, SetAddRecover, &fwretract.settings.retract_recover_extra);
+ EDIT_ITEM(ICON_FWRetLength, MSG_CONTROL_RETRACT, onDrawPFloatMenu, SetRetractLength, &fwretract.settings.retract_length);
+ EDIT_ITEM(ICON_FWRetSpeed, MSG_SINGLENOZZLE_RETRACT_SPEED, onDrawPFloatMenu, SetRetractSpeed, &fwretract.settings.retract_feedrate_mm_s);
+ EDIT_ITEM(ICON_FWRetZRaise, MSG_CONTROL_RETRACT_ZHOP, onDrawPFloat2Menu, SetZRaise, &fwretract.settings.retract_zraise);
+ EDIT_ITEM(ICON_FWRecSpeed, MSG_SINGLENOZZLE_UNRETRACT_SPEED, onDrawPFloatMenu, SetRecoverSpeed, &fwretract.settings.retract_recover_feedrate_mm_s);
+ EDIT_ITEM(ICON_FWRecExtra, MSG_CONTROL_RETRACT_RECOVER, onDrawPFloatMenu, SetAddRecover, &fwretract.settings.retract_recover_extra);
}
UpdateMenu(FWRetractMenu);
}
@@ -3774,11 +3555,11 @@ void Draw_Steps_Menu() {
#define Z_OFFSET_MIN -3
#define Z_OFFSET_MAX 3
- void LiveEditMesh() { ((MenuItemPtrClass*)EditZValueItem)->value = &bedlevel.z_values[HMI_value.Select ? BedLevelTools.mesh_x : MenuData.Value][HMI_value.Select ? MenuData.Value : BedLevelTools.mesh_y]; EditZValueItem->redraw(); }
- void ApplyEditMeshX() { BedLevelTools.mesh_x = MenuData.Value; }
- void SetEditMeshX() { HMI_value.Select = 0; SetIntOnClick(0, GRID_MAX_POINTS_X - 1, BedLevelTools.mesh_x, ApplyEditMeshX, LiveEditMesh); }
- void ApplyEditMeshY() { BedLevelTools.mesh_y = MenuData.Value; }
- void SetEditMeshY() { HMI_value.Select = 1; SetIntOnClick(0, GRID_MAX_POINTS_Y - 1, BedLevelTools.mesh_y, ApplyEditMeshY, LiveEditMesh); }
+ void LiveEditMesh() { ((MenuItemPtrClass*)EditZValueItem)->value = &bedlevel.z_values[HMI_value.Select ? bedLevelTools.mesh_x : MenuData.Value][HMI_value.Select ? MenuData.Value : bedLevelTools.mesh_y]; EditZValueItem->redraw(); }
+ void ApplyEditMeshX() { bedLevelTools.mesh_x = MenuData.Value; }
+ void SetEditMeshX() { HMI_value.Select = 0; SetIntOnClick(0, GRID_MAX_POINTS_X - 1, bedLevelTools.mesh_x, ApplyEditMeshX, LiveEditMesh); }
+ void ApplyEditMeshY() { bedLevelTools.mesh_y = MenuData.Value; }
+ void SetEditMeshY() { HMI_value.Select = 1; SetIntOnClick(0, GRID_MAX_POINTS_Y - 1, bedLevelTools.mesh_y, ApplyEditMeshY, LiveEditMesh); }
void SetEditZValue() { SetPFloatOnClick(Z_OFFSET_MIN, Z_OFFSET_MAX, 3); }
#endif
#endif
@@ -3792,14 +3573,14 @@ void Draw_Steps_Menu() {
onDrawIntMenu(menuitem, line, bedlevel.storage_slot);
}
- void ApplyUBLTiltGrid() { BedLevelTools.tilt_grid = MenuData.Value; }
- void SetUBLTiltGrid() { SetIntOnClick(1, 3, BedLevelTools.tilt_grid, ApplyUBLTiltGrid); }
+ void ApplyUBLTiltGrid() { bedLevelTools.tilt_grid = MenuData.Value; }
+ void SetUBLTiltGrid() { SetIntOnClick(1, 3, bedLevelTools.tilt_grid, ApplyUBLTiltGrid); }
void UBLTiltMesh() {
if (bedlevel.storage_slot < 0) bedlevel.storage_slot = 0;
char buf[15];
- if (BedLevelTools.tilt_grid > 1) {
- sprintf_P(buf, PSTR("G28O\nG29 J%i"), BedLevelTools.tilt_grid);
+ if (bedLevelTools.tilt_grid > 1) {
+ sprintf_P(buf, PSTR("G28O\nG29 J%i"), bedLevelTools.tilt_grid);
gcode.process_subcommands_now(buf);
}
else
@@ -3830,28 +3611,28 @@ void Draw_Steps_Menu() {
void Draw_MeshSet_Menu() {
checkkey = Menu;
- if (SetMenu(MeshMenu, GET_TEXT_F(MSG_MESH_LEVELING), 15)) {
+ if (SET_MENU(MeshMenu, MSG_MESH_LEVELING, 13)) {
BACK_ITEM(Draw_AdvancedSettings_Menu);
#if BOTH(HAS_HEATED_BED, PREHEAT_BEFORE_LEVELING)
- EDIT_ITEM_F(ICON_Temperature, MSG_UBL_SET_TEMP_BED, onDrawPIntMenu, SetBedLevT, &HMI_data.BedLevT);
+ EDIT_ITEM(ICON_Temperature, MSG_UBL_SET_TEMP_BED, onDrawPIntMenu, SetBedLevT, &HMI_data.BedLevT);
#endif
- EDIT_ITEM_F(ICON_SetZOffset, MSG_Z_FADE_HEIGHT, onDrawPFloatMenu, SetMeshFadeHeight, &planner.z_fade_height);
- EDIT_ITEM_F(ICON_UBLActive, MSG_ACTIVATE_MESH, onDrawChkbMenu, SetMeshActive, &planner.leveling_active);
+ EDIT_ITEM(ICON_SetZOffset, MSG_Z_FADE_HEIGHT, onDrawPFloatMenu, SetMeshFadeHeight, &planner.z_fade_height);
+ EDIT_ITEM(ICON_UBLActive, MSG_ACTIVATE_MESH, onDrawChkbMenu, SetMeshActive, &planner.leveling_active);
#if HAS_BED_PROBE
- MENU_ITEM_F(ICON_Level, MSG_AUTO_MESH, onDrawMenuItem, AutoLev);
+ MENU_ITEM(ICON_Level, MSG_AUTO_MESH, onDrawMenuItem, AutoLev);
#endif
#if ENABLED(AUTO_BED_LEVELING_UBL)
- EDIT_ITEM_F(ICON_UBLActive, MSG_UBL_STORAGE_SLOT, onDrawUBLSlot, SetUBLSlot, &bedlevel.storage_slot);
- MENU_ITEM_F(ICON_UBLActive, MSG_UBL_SAVE_MESH, onDrawMenuItem, UBLSaveMesh);
- MENU_ITEM_F(ICON_UBLActive, MSG_UBL_LOAD_MESH, onDrawMenuItem, UBLLoadMesh);
- EDIT_ITEM_F(ICON_UBLActive, MSG_UBL_TILTING_GRID, onDrawPInt8Menu, SetUBLTiltGrid, &BedLevelTools.tilt_grid);
- MENU_ITEM_F(ICON_UBLActive, MSG_UBL_TILT_MESH, onDrawMenuItem, UBLTiltMesh);
- MENU_ITEM_F(ICON_UBLActive, MSG_UBL_SMART_FILLIN, onDrawMenuItem, UBLSmartFillMesh);
+ EDIT_ITEM(ICON_UBLSlot, MSG_UBL_STORAGE_SLOT, onDrawUBLSlot, SetUBLSlot, &bedlevel.storage_slot);
+ MENU_ITEM(ICON_UBLSaveMesh, MSG_UBL_SAVE_MESH, onDrawMenuItem, UBLSaveMesh);
+ MENU_ITEM(ICON_UBLLoadMesh, MSG_UBL_LOAD_MESH, onDrawMenuItem, UBLLoadMesh);
+ EDIT_ITEM(ICON_UBLTiltGrid, MSG_UBL_TILTING_GRID, onDrawPInt8Menu, SetUBLTiltGrid, &bedLevelTools.tilt_grid);
+ MENU_ITEM(ICON_UBLTiltGrid, MSG_UBL_TILT_MESH, onDrawMenuItem, UBLTiltMesh);
+ MENU_ITEM(ICON_UBLSmartFill, MSG_UBL_SMART_FILLIN, onDrawMenuItem, UBLSmartFillMesh);
#endif
#if ENABLED(MESH_EDIT_MENU)
- MENU_ITEM_F(ICON_UBLActive, MSG_EDIT_MESH, onDrawSubMenu, Draw_EditMesh_Menu);
+ MENU_ITEM(ICON_MeshEdit, MSG_EDIT_MESH, onDrawSubMenu, Draw_EditMesh_Menu);
#endif
- MENU_ITEM_F(ICON_MeshViewer, MSG_MESH_VIEW, onDrawSubMenu, DWIN_MeshViewer);
+ MENU_ITEM(ICON_MeshViewer, MSG_MESH_VIEW, onDrawSubMenu, DWIN_MeshViewer);
}
UpdateMenu(MeshMenu);
}
@@ -3861,12 +3642,12 @@ void Draw_Steps_Menu() {
if (!leveling_is_valid()) { LCD_MESSAGE(MSG_UBL_MESH_INVALID); return; }
set_bed_leveling_enabled(false);
checkkey = Menu;
- if (SetMenu(EditMeshMenu, GET_TEXT_F(MSG_EDIT_MESH), 4)) {
- BedLevelTools.mesh_x = BedLevelTools.mesh_y = 0;
+ if (SET_MENU(EditMeshMenu, MSG_EDIT_MESH, 4)) {
+ bedLevelTools.mesh_x = bedLevelTools.mesh_y = 0;
BACK_ITEM(Draw_MeshSet_Menu);
- EDIT_ITEM_F(ICON_UBLActive, MSG_MESH_X, onDrawPInt8Menu, SetEditMeshX,&BedLevelTools.mesh_x);
- EDIT_ITEM_F(ICON_UBLActive, MSG_MESH_Y, onDrawPInt8Menu, SetEditMeshY,&BedLevelTools.mesh_y);
- EditZValueItem = EDIT_ITEM_F(ICON_UBLActive, MSG_MESH_EDIT_Z, onDrawPFloat3Menu, SetEditZValue, &bedlevel.z_values[BedLevelTools.mesh_x][BedLevelTools.mesh_y]);
+ EDIT_ITEM(ICON_MeshEditX, MSG_MESH_X, onDrawPInt8Menu, SetEditMeshX, &bedLevelTools.mesh_x);
+ EDIT_ITEM(ICON_MeshEditY, MSG_MESH_Y, onDrawPInt8Menu, SetEditMeshY, &bedLevelTools.mesh_y);
+ EditZValueItem = EDIT_ITEM(ICON_MeshEditZ, MSG_MESH_EDIT_Z, onDrawPFloat2Menu, SetEditZValue, &bedlevel.z_values[bedLevelTools.mesh_x][bedLevelTools.mesh_y]);
}
UpdateMenu(EditMeshMenu);
}
diff --git a/Marlin/src/lcd/e3v2/proui/dwin.h b/Marlin/src/lcd/e3v2/proui/dwin.h
index f4c0618691..50be4a8ba5 100644
--- a/Marlin/src/lcd/e3v2/proui/dwin.h
+++ b/Marlin/src/lcd/e3v2/proui/dwin.h
@@ -24,16 +24,25 @@
/**
* DWIN Enhanced implementation for PRO UI
* Author: Miguel A. Risco-Castillo (MRISCOC)
- * Version: 3.17.2
- * Date: 2022/04/08
+ * Version: 3.21.2
+ * Date: 2022/12/02
*/
+#include "../../../inc/MarlinConfig.h"
+
#include "dwin_defines.h"
#include "dwinui.h"
#include "../common/encoder.h"
#include "../../../libs/BL24CXX.h"
-#include "../../../inc/MarlinConfig.h"
+namespace GET_LANG(LCD_LANGUAGE) {
+ #define _MSG_PREHEAT(N) \
+ LSTR MSG_PREHEAT_##N = _UxGT("Preheat ") PREHEAT_## N ##_LABEL; \
+ LSTR MSG_PREHEAT_## N ##_SETTINGS = _UxGT("Preheat ") PREHEAT_## N ##_LABEL _UxGT(" Conf");
+ #if PREHEAT_COUNT > 3
+ REPEAT_S(4, PREHEAT_COUNT, _MSG_PREHEAT)
+ #endif
+}
enum processID : uint8_t {
// Process ID
@@ -44,7 +53,6 @@ enum processID : uint8_t {
SetIntNoDraw,
SetFloat,
SetPFloat,
- SelectFile,
PrintProcess,
Popup,
Leveling,
@@ -59,33 +67,88 @@ enum processID : uint8_t {
};
enum pidresult_t : uint8_t {
+ PIDTEMP_START = 0,
+ PIDTEMPBED_START,
PID_BAD_EXTRUDER_NUM,
PID_TEMP_TOO_HIGH,
PID_TUNING_TIMEOUT,
- PID_EXTR_START,
- PID_BED_START,
- PID_DONE
+ PID_DONE,
};
#define DWIN_CHINESE 123
#define DWIN_ENGLISH 0
+typedef struct {
+ // Color settings
+ uint16_t Background_Color;
+ uint16_t Cursor_Color;
+ uint16_t TitleBg_Color;
+ uint16_t TitleTxt_Color;
+ uint16_t Text_Color;
+ uint16_t Selected_Color;
+ uint16_t SplitLine_Color;
+ uint16_t Highlight_Color;
+ uint16_t StatusBg_Color;
+ uint16_t StatusTxt_Color;
+ uint16_t PopupBg_Color;
+ uint16_t PopupTxt_Color;
+ uint16_t AlertBg_Color;
+ uint16_t AlertTxt_Color;
+ uint16_t PercentTxt_Color;
+ uint16_t Barfill_Color;
+ uint16_t Indicator_Color;
+ uint16_t Coordinate_Color;
+
+ // Temperatures
+ #if ENABLED(PIDTEMP)
+ int16_t HotendPidT = DEF_HOTENDPIDT;
+ #endif
+ #if ENABLED(PIDTEMPBED)
+ int16_t BedPidT = DEF_BEDPIDT;
+ #endif
+ #if (HAS_HOTEND || HAS_HEATED_BED) && HAS_PID_HEATING
+ int16_t PidCycles = DEF_PIDCYCLES;
+ #endif
+ #if ENABLED(PREVENT_COLD_EXTRUSION)
+ int16_t ExtMinT = EXTRUDE_MINTEMP;
+ #endif
+ #if ENABLED(PREHEAT_BEFORE_LEVELING)
+ int16_t BedLevT = LEVELING_BED_TEMP;
+ #endif
+ #if ENABLED(BAUD_RATE_GCODE)
+ bool Baud115K = false;
+ #endif
+ bool FullManualTramming = false;
+ bool MediaAutoMount = ENABLED(HAS_SD_EXTENDER);
+ #if BOTH(INDIVIDUAL_AXIS_HOMING_SUBMENU, MESH_BED_LEVELING)
+ uint8_t z_after_homing = DEF_Z_AFTER_HOMING;
+ #endif
+ #if ENABLED(MESH_BED_LEVELING)
+ float ManualZOffset = 0;
+ #endif
+ // Led
+ #if BOTH(LED_CONTROL_MENU, HAS_COLOR_LEDS)
+ LEDColor Led_Color = Def_Leds_Color;
+ #endif
+} HMI_data_t;
+
+extern HMI_data_t HMI_data;
+static constexpr size_t eeprom_data_size = sizeof(HMI_data_t);
+
typedef struct {
int8_t Color[3]; // Color components
- pidresult_t pidresult = PID_DONE;
+ TERN_(HAS_PID_HEATING, pidresult_t pidresult = PID_DONE);
uint8_t Select = 0; // Auxiliary selector variable
AxisEnum axis = X_AXIS; // Axis Select
} HMI_value_t;
typedef struct {
uint8_t language;
+ bool printing_flag:1; // sd or host printing
+ bool abort_flag:1; // sd or host was aborted
+ bool pause_flag:1; // printing is paused
bool percent_flag:1; // percent was override by M73
bool remain_flag:1; // remain was override by M73
- bool pause_flag:1; // printing is paused
- bool pause_action:1; // flag a pause action
- bool abort_flag:1; // printing is aborting
- bool abort_action:1; // flag a aborting action
- bool print_finish:1; // print was finished
bool select_flag:1; // Popup button selected
bool home_flag:1; // homing in course
bool heat_flag:1; // 0: heating done 1: during heating
@@ -105,6 +168,7 @@ extern millis_t dwin_heat_time;
#endif
// Tool Functions
+uint32_t GetHash(char * str);
#if ENABLED(EEPROM_SETTINGS)
void WriteEeprom();
void ReadEeprom();
@@ -118,15 +182,14 @@ void DisableMotors();
void AutoLev();
void AutoHome();
#if HAS_PREHEAT
- void DoPreheat0();
- void DoPreheat1();
- void DoPreheat2();
+ #define _DOPREHEAT(N) void DoPreheat##N();
+ REPEAT_1(PREHEAT_COUNT, _DOPREHEAT)
#endif
void DoCoolDown();
-#if HAS_HOTEND
+#if ENABLED(PIDTEMP)
void HotendPID();
#endif
-#if HAS_HEATED_BED
+#if ENABLED(PIDTEMPBED)
void BedPID();
#endif
#if ENABLED(BAUD_RATE_GCODE)
@@ -151,6 +214,12 @@ void ParkHead();
void UBLSaveMesh();
void UBLLoadMesh();
#endif
+#if ENABLED(HOST_SHUTDOWN_MENU_ITEM) && defined(SHUTDOWN_ACTION)
+ void HostShutDown();
+#endif
+#if !HAS_BED_PROBE
+ void HomeZandDisable();
+#endif
// Other
void Goto_PrintProcess();
@@ -160,7 +229,7 @@ void Goto_PowerLossRecovery();
void Goto_ConfirmToPrint();
void DWIN_Draw_Dashboard(const bool with_update); // Status Area
void Draw_Main_Area(); // Redraw main area
-void DWIN_DrawStatusLine(); // Draw simple status text
+void DWIN_DrawStatusLine(const char *text = ""); // Draw simple status text
void DWIN_RedrawDash(); // Redraw Dash and Status line
void DWIN_RedrawScreen(); // Redraw all screen elements
void HMI_MainMenu(); // Main process screen
@@ -169,7 +238,6 @@ void HMI_Printing(); // Print page
void HMI_ReturnScreen(); // Return to previous screen before popups
void HMI_WaitForUser();
void HMI_SaveProcessID(const uint8_t id);
-void HMI_SDCardInit();
void HMI_SDCardUpdate();
void EachMomentUpdate();
void update_variable();
@@ -179,12 +247,11 @@ void DWIN_CheckStatusMessage();
void DWIN_HomingStart();
void DWIN_HomingDone();
#if HAS_MESH
- void DWIN_MeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval);
+ void DWIN_MeshUpdate(const int8_t cpos, const int8_t tpos, const_float_t zval);
#endif
void DWIN_LevelingStart();
void DWIN_LevelingDone();
-void DWIN_PidTuning(pidresult_t result);
-void DWIN_Print_Started(const bool sd=false);
+void DWIN_Print_Started();
void DWIN_Print_Pause();
void DWIN_Print_Resume();
void DWIN_Print_Finished();
@@ -228,6 +295,7 @@ void DWIN_RebootScreen();
#endif
// Menu drawing functions
+void Draw_Print_File_Menu();
void Draw_Control_Menu();
void Draw_AdvancedSettings_Menu();
void Draw_Prepare_Menu();
@@ -260,14 +328,6 @@ void Draw_Motion_Menu();
#if ENABLED(MESH_BED_LEVELING)
void Draw_ManualMesh_Menu();
#endif
-#if HAS_HOTEND
- void Draw_Preheat1_Menu();
- void Draw_Preheat2_Menu();
- void Draw_Preheat3_Menu();
- #if ENABLED(PIDTEMP)
- void Draw_HotendPID_Menu();
- #endif
-#endif
void Draw_Temperature_Menu();
void Draw_MaxSpeed_Menu();
void Draw_MaxAccel_Menu();
@@ -275,9 +335,6 @@ void Draw_MaxAccel_Menu();
void Draw_MaxJerk_Menu();
#endif
void Draw_Steps_Menu();
-#if ENABLED(PIDTEMPBED)
- void Draw_BedPID_Menu();
-#endif
#if EITHER(HAS_BED_PROBE, BABYSTEPPING)
void Draw_ZOffsetWiz_Menu();
#endif
@@ -293,3 +350,12 @@ void Draw_Steps_Menu();
void Draw_EditMesh_Menu();
#endif
#endif
+
+// PID
+void DWIN_PidTuning(pidresult_t result);
+#if ENABLED(PIDTEMP)
+ void Draw_HotendPID_Menu();
+#endif
+#if ENABLED(PIDTEMPBED)
+ void Draw_BedPID_Menu();
+#endif
diff --git a/Marlin/src/lcd/e3v2/proui/dwin_defines.h b/Marlin/src/lcd/e3v2/proui/dwin_defines.h
index dffc26478d..de3f40e281 100644
--- a/Marlin/src/lcd/e3v2/proui/dwin_defines.h
+++ b/Marlin/src/lcd/e3v2/proui/dwin_defines.h
@@ -19,44 +19,45 @@
* along with this program. If not, see .
*
*/
-#pragma once
-
/**
* DWIN general defines and data structs for PRO UI
* Author: Miguel A. Risco-Castillo (MRISCOC)
- * Version: 3.11.2
- * Date: 2022/02/28
+ * Version: 3.12.2
+ * Date: 2022/08/08
*/
-#define HAS_GCODE_PREVIEW 1
-#define HAS_PIDPLOT 1
-#define HAS_ESDIAG 1
-#define HAS_LOCKSCREEN 1
+#pragma once
+
//#define DEBUG_DWIN 1
//#define NEED_HEX_PRINT 1
-#include "../../../inc/MarlinConfigPre.h"
-#include "../common/dwin_color.h"
-#if ENABLED(LED_CONTROL_MENU)
- #include "../../../feature/leds/leds.h"
-#endif
-#include
-
#if defined(__STM32F1__) || defined(STM32F1)
#define DASH_REDRAW 1
#endif
+#if DISABLED(PROBE_MANUALLY) && ANY(AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
+ #define HAS_ONESTEP_LEVELING 1
+#endif
+
+#if !HAS_BED_PROBE && ENABLED(BABYSTEPPING)
+ #define JUST_BABYSTEP 1
+#endif
+
+#if ANY(BABYSTEPPING, HAS_BED_PROBE, HAS_WORKSPACE_OFFSET)
+ #define HAS_ZOFFSET_ITEM 1
+#endif
+
#define Def_Background_Color RGB( 1, 12, 8)
-#define Def_Cursor_color RGB(20, 49, 31)
-#define Def_TitleBg_color RGB( 0, 23, 16)
-#define Def_TitleTxt_color Color_White
+#define Def_Cursor_Color RGB(20, 49, 31)
+#define Def_TitleBg_Color RGB( 0, 23, 16)
+#define Def_TitleTxt_Color Color_White
#define Def_Text_Color Color_White
#define Def_Selected_Color Select_Color
#define Def_SplitLine_Color RGB( 0, 23, 16)
#define Def_Highlight_Color Color_White
#define Def_StatusBg_Color RGB( 0, 23, 16)
#define Def_StatusTxt_Color Color_Yellow
-#define Def_PopupBg_color Color_Bg_Window
+#define Def_PopupBg_Color Color_Bg_Window
#define Def_PopupTxt_Color Popup_Text_Color
#define Def_AlertBg_Color Color_Bg_Red
#define Def_AlertTxt_Color Color_Yellow
@@ -68,55 +69,15 @@
#if BOTH(LED_CONTROL_MENU, HAS_COLOR_LEDS)
#define Def_Leds_Color LEDColorWhite()
#endif
+#if ENABLED(CASELIGHT_USES_BRIGHTNESS)
+ #define Def_CaseLight_Brightness 255
+#endif
+#ifdef Z_AFTER_HOMING
+ #define DEF_Z_AFTER_HOMING Z_AFTER_HOMING
+#else
+ #define DEF_Z_AFTER_HOMING 0
+#endif
+#define DEF_HOTENDPIDT TERN(PREHEAT_1_TEMP_BED, PREHEAT_1_TEMP_HOTEND, 195)
+#define DEF_BEDPIDT TERN(PREHEAT_1_TEMP_BED, PREHEAT_1_TEMP_HOTEND, 60)
+#define DEF_PIDCYCLES 5
-typedef struct {
- // Color settings
- uint16_t Background_Color = Def_Background_Color;
- uint16_t Cursor_color = Def_Cursor_color;
- uint16_t TitleBg_color = Def_TitleBg_color;
- uint16_t TitleTxt_color = Def_TitleTxt_color;
- uint16_t Text_Color = Def_Text_Color;
- uint16_t Selected_Color = Def_Selected_Color;
- uint16_t SplitLine_Color = Def_SplitLine_Color;
- uint16_t Highlight_Color = Def_Highlight_Color;
- uint16_t StatusBg_Color = Def_StatusBg_Color;
- uint16_t StatusTxt_Color = Def_StatusTxt_Color;
- uint16_t PopupBg_color = Def_PopupBg_color;
- uint16_t PopupTxt_Color = Def_PopupTxt_Color;
- uint16_t AlertBg_Color = Def_AlertBg_Color;
- uint16_t AlertTxt_Color = Def_AlertTxt_Color;
- uint16_t PercentTxt_Color = Def_PercentTxt_Color;
- uint16_t Barfill_Color = Def_Barfill_Color;
- uint16_t Indicator_Color = Def_Indicator_Color;
- uint16_t Coordinate_Color = Def_Coordinate_Color;
- // Temperatures
- #if HAS_HOTEND && defined(PREHEAT_1_TEMP_HOTEND)
- int16_t HotendPidT = PREHEAT_1_TEMP_HOTEND;
- #endif
- #if HAS_HEATED_BED && defined(PREHEAT_1_TEMP_BED)
- int16_t BedPidT = PREHEAT_1_TEMP_BED;
- #endif
- #if HAS_HOTEND || HAS_HEATED_BED
- int16_t PidCycles = 10;
- #endif
- #if ENABLED(PREVENT_COLD_EXTRUSION)
- int16_t ExtMinT = EXTRUDE_MINTEMP;
- #endif
- #if BOTH(HAS_HEATED_BED, PREHEAT_BEFORE_LEVELING)
- int16_t BedLevT = LEVELING_BED_TEMP;
- #endif
- #if ENABLED(BAUD_RATE_GCODE)
- bool Baud115K = false;
- #endif
- bool FullManualTramming = false;
- #if ENABLED(MESH_BED_LEVELING)
- float ManualZOffset = 0;
- #endif
- // Led
- #if BOTH(LED_CONTROL_MENU, HAS_COLOR_LEDS)
- LEDColor Led_Color = Def_Leds_Color;
- #endif
-} HMI_data_t;
-
-static constexpr size_t eeprom_data_size = sizeof(HMI_data_t);
-extern HMI_data_t HMI_data;
diff --git a/Marlin/src/lcd/e3v2/proui/dwin_popup.cpp b/Marlin/src/lcd/e3v2/proui/dwin_popup.cpp
index 59b6c0d328..552075f9dc 100644
--- a/Marlin/src/lcd/e3v2/proui/dwin_popup.cpp
+++ b/Marlin/src/lcd/e3v2/proui/dwin_popup.cpp
@@ -46,8 +46,8 @@ uint16_t HighlightYPos = 280;
void Draw_Select_Highlight(const bool sel, const uint16_t ypos) {
HighlightYPos = ypos;
HMI_flag.select_flag = sel;
- const uint16_t c1 = sel ? HMI_data.Highlight_Color : HMI_data.PopupBg_color,
- c2 = sel ? HMI_data.PopupBg_color : HMI_data.Highlight_Color;
+ const uint16_t c1 = sel ? HMI_data.Highlight_Color : HMI_data.PopupBg_Color,
+ c2 = sel ? HMI_data.PopupBg_Color : HMI_data.Highlight_Color;
DWIN_Draw_Rectangle(0, c1, 25, ypos - 1, 126, ypos + 38);
DWIN_Draw_Rectangle(0, c1, 24, ypos - 2, 127, ypos + 39);
DWIN_Draw_Rectangle(0, c2, 145, ypos - 1, 246, ypos + 38);
diff --git a/Marlin/src/lcd/e3v2/proui/dwin_popup.h b/Marlin/src/lcd/e3v2/proui/dwin_popup.h
index b4503ea786..f24aac582e 100644
--- a/Marlin/src/lcd/e3v2/proui/dwin_popup.h
+++ b/Marlin/src/lcd/e3v2/proui/dwin_popup.h
@@ -44,7 +44,7 @@ void Goto_Popup(const popupDrawFunc_t fnDraw, const popupClickFunc_t fnClick=nul
void HMI_Popup();
inline void Draw_Popup_Bkgd() {
- DWIN_Draw_Rectangle(1, HMI_data.PopupBg_color, 14, 60, 258, 330);
+ DWIN_Draw_Rectangle(1, HMI_data.PopupBg_Color, 14, 60, 258, 330);
DWIN_Draw_Rectangle(0, HMI_data.Highlight_Color, 14, 60, 258, 330);
}
diff --git a/Marlin/src/lcd/e3v2/proui/dwinui.cpp b/Marlin/src/lcd/e3v2/proui/dwinui.cpp
index 5ed36e7dac..afb18f24db 100644
--- a/Marlin/src/lcd/e3v2/proui/dwinui.cpp
+++ b/Marlin/src/lcd/e3v2/proui/dwinui.cpp
@@ -23,21 +23,17 @@
/**
* DWIN Enhanced implementation for PRO UI
* Author: Miguel A. Risco-Castillo (MRISCOC)
- * Version: 3.18.1
- * Date: 2022/07/05
+ * Version: 3.20.1
+ * Date: 2022/10/25
*/
-#include "../../../inc/MarlinConfigPre.h"
+#include "../../../inc/MarlinConfig.h"
#if ENABLED(DWIN_LCD_PROUI)
-#include "../../../inc/MarlinConfig.h"
+#include "dwin_defines.h"
#include "dwin_lcd.h"
#include "dwinui.h"
-#include "dwin_defines.h"
-
-//#define DEBUG_OUT 1
-#include "../../../core/debug_out.h"
xy_int_t DWINUI::cursor = { 0 };
uint16_t DWINUI::pencolor = Color_White;
@@ -50,13 +46,6 @@ FSTR_P const DWINUI::Author = F(STRING_CONFIG_H_AUTHOR);
void (*DWINUI::onTitleDraw)(TitleClass* title) = nullptr;
void DWINUI::init() {
- delay(750); // Delay for wait to wakeup screen
- const bool hs = DWIN_Handshake(); UNUSED(hs);
- #if ENABLED(DEBUG_DWIN)
- SERIAL_ECHOPGM("DWIN_Handshake ");
- SERIAL_ECHOLNF(hs ? F("ok.") : F("error."));
- #endif
- DWIN_Frame_SetDir(1);
cursor.reset();
pencolor = Color_White;
textcolor = Def_Text_Color;
@@ -210,6 +199,19 @@ void DWINUI::Draw_Float(uint8_t bShow, bool signedMode, fontid_t fid, uint16_t c
DWIN_Draw_String(bShow, fid, color, bColor, x, y, dtostrf(value, iNum + (signedMode ? 2:1) + fNum, fNum, nstr));
}
+// ------------------------- Icons -------------------------------//
+
+// Draw an Icon and select library automatically
+// BG: The icon background display: false=Background filtering is not displayed, true=Background display
+// libID: Icon library ID
+// picID: Icon ID
+// x/y: Upper-left point
+void DWINUI::ICON_Show(bool BG, uint8_t icon, uint16_t x, uint16_t y) {
+ const uint8_t libID = ICON TERN_(HAS_CUSTOMICONS, + (icon / 100));
+ const uint8_t picID = icon TERN_(HAS_CUSTOMICONS, % 100);
+ DWIN_ICON_Show(BG, false, !BG, libID, picID, x, y);
+}
+
// ------------------------- Buttons ------------------------------//
void DWINUI::Draw_Button(uint16_t color, uint16_t bcolor, uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, const char * const caption) {
@@ -320,8 +322,8 @@ uint16_t DWINUI::RainbowInt(int16_t val, int16_t minv, int16_t maxv) {
// x/y: Upper-left point
// mode : 0 : unchecked, 1 : checked
void DWINUI::Draw_Checkbox(uint16_t color, uint16_t bcolor, uint16_t x, uint16_t y, bool checked=false) {
- DWIN_Draw_String(true, font8x16, color, bcolor, x + 4, y, checked ? F("x") : F(" "));
DWIN_Draw_Rectangle(0, color, x + 2, y + 2, x + 17, y + 17);
+ DWIN_Draw_Rectangle(1, checked ? color : bcolor, x + 6, y + 6, x + 13, y + 13);
}
// Clear Menu by filling the menu area with background color
diff --git a/Marlin/src/lcd/e3v2/proui/dwinui.h b/Marlin/src/lcd/e3v2/proui/dwinui.h
index a544471831..3dd37f30df 100644
--- a/Marlin/src/lcd/e3v2/proui/dwinui.h
+++ b/Marlin/src/lcd/e3v2/proui/dwinui.h
@@ -19,7 +19,6 @@
* along with this program. If not, see .
*
*/
-#pragma once
/**
* DWIN Enhanced implementation for PRO UI
@@ -28,10 +27,14 @@
* Date: 2022/07/05
*/
-#include "dwin_lcd.h"
+#pragma once
+
+#include "../../../inc/MarlinConfigPre.h"
+
#include "../common/dwin_set.h"
#include "../common/dwin_font.h"
#include "../common/dwin_color.h"
+#include "dwin_lcd.h"
// Extra Icons
#define ICON_AdvSet ICON_Language
@@ -74,6 +77,10 @@
#define ICON_MaxPosX ICON_MoveX
#define ICON_MaxPosY ICON_MoveY
#define ICON_MaxPosZ ICON_MoveZ
+#define ICON_MeshEdit ICON_Homing
+#define ICON_MeshEditX ICON_MoveX
+#define ICON_MeshEditY ICON_MoveY
+#define ICON_MeshEditZ ICON_MoveZ
#define ICON_MeshNext ICON_Axis
#define ICON_MeshPoints ICON_SetEndTemp
#define ICON_MeshSave ICON_WriteEEPROM
@@ -85,11 +92,22 @@
#define ICON_ParkPosY ICON_StepY
#define ICON_ParkPosZ ICON_StepZ
#define ICON_PhySet ICON_PrintSize
-#define ICON_PIDbed ICON_SetBedTemp
-#define ICON_PIDcycles ICON_ResumeEEPROM
+#define ICON_PIDNozzle ICON_SetEndTemp
+#define ICON_PIDBed ICON_SetBedTemp
+#define ICON_PIDCycles ICON_ResumeEEPROM
#define ICON_PIDValue ICON_Contact
#define ICON_PrintStats ICON_PrintTime
#define ICON_PrintStatsReset ICON_RemainTime
+#define ICON_Preheat1 ICON_PLAPreheat
+#define ICON_Preheat2 ICON_ABSPreheat
+#define ICON_Preheat3 ICON_CustomPreheat
+#define ICON_Preheat4 ICON_CustomPreheat
+#define ICON_Preheat5 ICON_CustomPreheat
+#define ICON_Preheat6 ICON_CustomPreheat
+#define ICON_Preheat7 ICON_CustomPreheat
+#define ICON_Preheat8 ICON_CustomPreheat
+#define ICON_Preheat9 ICON_CustomPreheat
+#define ICON_Preheat10 ICON_CustomPreheat
#define ICON_ProbeDeploy ICON_SetEndTemp
#define ICON_ProbeMargin ICON_PrintSize
#define ICON_ProbeOffsetX ICON_StepX
@@ -105,9 +123,28 @@
#define ICON_Scolor ICON_MaxSpeed
#define ICON_SetBaudRate ICON_Setspeed
#define ICON_SetCustomPreheat ICON_SetEndTemp
+#define ICON_SetPreheat1 ICON_SetPLAPreheat
+#define ICON_SetPreheat2 ICON_SetABSPreheat
+#define ICON_SetPreheat3 ICON_SetCustomPreheat
+#define ICON_SetPreheat4 ICON_SetCustomPreheat
+#define ICON_SetPreheat5 ICON_SetCustomPreheat
+#define ICON_SetPreheat6 ICON_SetCustomPreheat
+#define ICON_SetPreheat7 ICON_SetCustomPreheat
+#define ICON_SetPreheat8 ICON_SetCustomPreheat
+#define ICON_SetPreheat9 ICON_SetCustomPreheat
+#define ICON_SetPreheat10 ICON_SetCustomPreheat
#define ICON_Sound ICON_Cool
#define ICON_TBSetup ICON_Contact
#define ICON_UBLActive ICON_HotendTemp
+#define ICON_UBLActive ICON_HotendTemp
+#define ICON_UBLSlot ICON_ResumeEEPROM
+#define ICON_UBLSaveMesh ICON_WriteEEPROM
+#define ICON_UBLLoadMesh ICON_ReadEEPROM
+#define ICON_UBLTiltGrid ICON_PrintSize
+#define ICON_UBLSmartFill ICON_StockConfiguration
+#define ICON_ZAfterHome ICON_SetEndTemp
+
+
#define ICON_CaseLight ICON_Motion
#define ICON_LedControl ICON_Motion
@@ -262,18 +299,25 @@ namespace DWINUI {
return t;
}
+ // Draw an Icon and select library automatically
+ // BG: The icon background display: false=Background filtering is not displayed, true=Background display
+ // libID: Icon library ID
+ // picID: Icon ID
+ // x/y: Upper-left point
+ void ICON_Show(bool BG, uint8_t icon, uint16_t x, uint16_t y);
+
// Draw an Icon with transparent background from the library ICON
// icon: Icon ID
// x/y: Upper-left point
inline void Draw_Icon(uint8_t icon, uint16_t x, uint16_t y) {
- DWIN_ICON_Show(ICON, icon, x, y);
+ ICON_Show(false, icon, x, y);
}
// Draw an Icon from the library ICON with its background
// icon: Icon ID
// x/y: Upper-left point
inline void Draw_IconWB(uint8_t icon, uint16_t x, uint16_t y) {
- DWIN_ICON_Show(true, false, false, ICON, icon, x, y);
+ ICON_Show(true, icon, x, y);
}
// Draw a numeric integer value
diff --git a/Marlin/src/lcd/e3v2/proui/endstop_diag.cpp b/Marlin/src/lcd/e3v2/proui/endstop_diag.cpp
index 19d726037c..0945d69778 100644
--- a/Marlin/src/lcd/e3v2/proui/endstop_diag.cpp
+++ b/Marlin/src/lcd/e3v2/proui/endstop_diag.cpp
@@ -23,17 +23,13 @@
/**
* DWIN Endstops diagnostic page for PRO UI
* Author: Miguel A. Risco-Castillo (MRISCOC)
- * Version: 1.2.2
- * Date: 2022/02/24
+ * Version: 1.3.3
+ * Date: 2022/10/07
*/
#include "../../../inc/MarlinConfigPre.h"
-#if ENABLED(DWIN_LCD_PROUI)
-
-#include "dwin_defines.h"
-
-#if HAS_ESDIAG
+#if BOTH(DWIN_LCD_PROUI, HAS_ESDIAG)
#include "endstop_diag.h"
@@ -64,7 +60,7 @@ void draw_es_label(FSTR_P const flabel=nullptr) {
void draw_es_state(const bool is_hit) {
const uint8_t LM = 130;
DWINUI::cursor.x = LM;
- DWIN_Draw_Rectangle(1, HMI_data.PopupBg_color, LM, DWINUI::cursor.y, LM + 100, DWINUI::cursor.y + 20);
+ DWIN_Draw_Rectangle(1, HMI_data.PopupBg_Color, LM, DWINUI::cursor.y, LM + 100, DWINUI::cursor.y + 20);
is_hit ? DWINUI::Draw_String(RGB(31,31,16), F(STR_ENDSTOP_HIT)) : DWINUI::Draw_String(RGB(16,63,16), F(STR_ENDSTOP_OPEN));
DWINUI::MoveBy(0, 25);
}
@@ -109,5 +105,4 @@ void ESDiagClass::Update() {
DWIN_UpdateLCD();
}
-#endif // HAS_ESDIAG
-#endif // DWIN_LCD_PROUI
+#endif // DWIN_LCD_PROUI && HAS_ESDIAG
diff --git a/Marlin/src/lcd/e3v2/proui/endstop_diag.h b/Marlin/src/lcd/e3v2/proui/endstop_diag.h
index 316a1e1ed3..33f1d10d2d 100644
--- a/Marlin/src/lcd/e3v2/proui/endstop_diag.h
+++ b/Marlin/src/lcd/e3v2/proui/endstop_diag.h
@@ -24,8 +24,8 @@
/**
* DWIN End Stops diagnostic page for PRO UI
* Author: Miguel A. Risco-Castillo (MRISCOC)
- * Version: 1.2.3
- * Date: 2022/02/24
+ * Version: 1.3.2
+ * Date: 2022/10/07
*/
class ESDiagClass {
diff --git a/Marlin/src/lcd/e3v2/proui/gcode_preview.cpp b/Marlin/src/lcd/e3v2/proui/gcode_preview.cpp
index adb23a9664..6411b669bb 100644
--- a/Marlin/src/lcd/e3v2/proui/gcode_preview.cpp
+++ b/Marlin/src/lcd/e3v2/proui/gcode_preview.cpp
@@ -23,8 +23,8 @@
/**
* DWIN g-code thumbnail preview
* Author: Miguel A. Risco-Castillo
- * version: 2.1
- * Date: 2021/06/19
+ * version: 3.1.2
+ * Date: 2022/09/03
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as
@@ -43,11 +43,8 @@
*/
#include "../../../inc/MarlinConfigPre.h"
-#if ENABLED(DWIN_LCD_PROUI)
-#include "dwin_defines.h"
-
-#if HAS_GCODE_PREVIEW
+#if BOTH(DWIN_LCD_PROUI, HAS_GCODE_PREVIEW)
#include "../../../core/types.h"
#include "../../marlinui.h"
@@ -246,6 +243,10 @@ void Preview_DrawFromSD() {
}
}
+void Preview_Invalidate() {
+ fileprop.thumbstart = 0;
+}
+
bool Preview_Valid() {
return !!fileprop.thumbstart;
}
@@ -254,5 +255,4 @@ void Preview_Reset() {
fileprop.thumbsize = 0;
}
-#endif // HAS_GCODE_PREVIEW
-#endif // DWIN_LCD_PROUI
+#endif // HAS_GCODE_PREVIEW && DWIN_LCD_PROUI
diff --git a/Marlin/src/lcd/e3v2/proui/gcode_preview.h b/Marlin/src/lcd/e3v2/proui/gcode_preview.h
index 4417084a24..c1949c5abc 100644
--- a/Marlin/src/lcd/e3v2/proui/gcode_preview.h
+++ b/Marlin/src/lcd/e3v2/proui/gcode_preview.h
@@ -1,8 +1,8 @@
/**
* DWIN g-code thumbnail preview
* Author: Miguel A. Risco-Castillo
- * version: 2.1
- * Date: 2021/06/19
+ * version: 3.1.2
+ * Date: 2022/09/03
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as
@@ -23,5 +23,6 @@
#pragma once
void Preview_DrawFromSD();
+void Preview_Invalidate();
bool Preview_Valid();
void Preview_Reset();
diff --git a/Marlin/src/lcd/e3v2/proui/lockscreen.cpp b/Marlin/src/lcd/e3v2/proui/lockscreen.cpp
index 86c2095294..85f35582b2 100644
--- a/Marlin/src/lcd/e3v2/proui/lockscreen.cpp
+++ b/Marlin/src/lcd/e3v2/proui/lockscreen.cpp
@@ -23,18 +23,15 @@
/**
* Lock screen implementation for PRO UI
* Author: Miguel A. Risco-Castillo (MRISCOC)
- * Version: 2.2.0
- * Date: 2022/04/11
+ * Version: 2.3.2
+ * Date: 2022/11/20
*/
#include "../../../inc/MarlinConfigPre.h"
-#if ENABLED(DWIN_LCD_PROUI)
+#if BOTH(DWIN_LCD_PROUI, HAS_LOCKSCREEN)
#include "dwin_defines.h"
-
-#if HAS_LOCKSCREEN
-
#include "dwinui.h"
#include "dwin.h"
#include "lockscreen.h"
@@ -75,6 +72,4 @@ void LockScreenClass::onEncoder(EncoderState encoder_diffState) {
DWIN_UpdateLCD();
}
-#endif // HAS_LOCKSCREEN
-
-#endif // DWIN_LCD_PROUI
+#endif // DWIN_LCD_PROUI && HAS_LOCKSCREEN
diff --git a/Marlin/src/lcd/e3v2/proui/lockscreen.h b/Marlin/src/lcd/e3v2/proui/lockscreen.h
index 83d5530be3..cb75f2c7c0 100644
--- a/Marlin/src/lcd/e3v2/proui/lockscreen.h
+++ b/Marlin/src/lcd/e3v2/proui/lockscreen.h
@@ -24,8 +24,8 @@
/**
* Lock screen implementation for PRO UI
* Author: Miguel A. Risco-Castillo (MRISCOC)
- * Version: 2.2.0
- * Date: 2022/04/11
+ * Version: 2.3.2
+ * Date: 2022/11/20
*/
#include "../common/encoder.h"
diff --git a/Marlin/src/lcd/e3v2/proui/menus.cpp b/Marlin/src/lcd/e3v2/proui/menus.cpp
index 85594fecdb..32c19acb69 100644
--- a/Marlin/src/lcd/e3v2/proui/menus.cpp
+++ b/Marlin/src/lcd/e3v2/proui/menus.cpp
@@ -23,8 +23,8 @@
/**
* Menu functions for ProUI
* Author: Miguel A. Risco-Castillo
- * Version: 1.5.1
- * Date: 2022/05/23
+ * Version: 1.9.1
+ * Date: 2022/12/02
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as
@@ -53,22 +53,23 @@
int8_t MenuItemTotal = 0;
int8_t MenuItemCount = 0;
-MenuItemClass** MenuItems = nullptr;
+CustomMenuItemClass** MenuItems = nullptr;
MenuClass *CurrentMenu = nullptr;
MenuClass *PreviousMenu = nullptr;
-void (*onMenuDraw)(MenuClass* menu) = nullptr;
-void (*onCursorErase)(const int8_t line) = nullptr;
-void (*onCursorDraw)(const int8_t line) = nullptr;
MenuData_t MenuData;
// Menuitem Drawing functions =================================================
void Draw_Title(TitleClass* title) {
- DWIN_Draw_Rectangle(1, HMI_data.TitleBg_color, 0, 0, DWIN_WIDTH - 1, TITLE_HEIGHT - 1);
+ DWIN_Draw_Rectangle(1, HMI_data.TitleBg_Color, 0, 0, DWIN_WIDTH - 1, TITLE_HEIGHT - 1);
if (title->frameid)
DWIN_Frame_AreaCopy(title->frameid, title->frame.left, title->frame.top, title->frame.right, title->frame.bottom, 14, (TITLE_HEIGHT - (title->frame.bottom - title->frame.top)) / 2 - 1);
else
- DWIN_Draw_String(false, DWIN_FONT_HEAD, HMI_data.TitleTxt_color, HMI_data.TitleBg_color, 14, (TITLE_HEIGHT - DWINUI::fontHeight(DWIN_FONT_HEAD)) / 2 - 1, title->caption);
+ #if ENABLED(TITLE_CENTERED)
+ DWINUI::Draw_CenteredString(false, DWIN_FONT_HEAD, HMI_data.TitleTxt_Color, HMI_data.TitleBg_Color, (TITLE_HEIGHT - DWINUI::fontHeight(DWIN_FONT_HEAD)) / 2 - 1, title->caption);
+ #else
+ DWIN_Draw_String(false, DWIN_FONT_HEAD, HMI_data.TitleTxt_Color, HMI_data.TitleBg_Color, 14, (TITLE_HEIGHT - DWINUI::fontHeight(DWIN_FONT_HEAD)) / 2 - 1, title->caption);
+ #endif
}
void Draw_Menu(MenuClass* menu) {
@@ -78,7 +79,7 @@ void Draw_Menu(MenuClass* menu) {
void Draw_Menu_Cursor(const int8_t line) {
const uint16_t ypos = MYPOS(line);
- DWINUI::Draw_Box(1, HMI_data.Cursor_color, {0, ypos, 15, MLINE - 1});
+ DWINUI::Draw_Box(1, HMI_data.Cursor_Color, {0, ypos, 15, MLINE - 1});
}
void Erase_Menu_Cursor(const int8_t line) {
@@ -86,17 +87,39 @@ void Erase_Menu_Cursor(const int8_t line) {
DWINUI::Draw_Box(1, HMI_data.Background_Color, {0, ypos, 15, MLINE - 1});
}
-void Draw_Menu_Line(const uint8_t line, const uint8_t icon /*=0*/, const char * const label /*=nullptr*/, bool more /*=false*/) {
+void Erase_Menu_Text(const int8_t line) {
+ if (line < 0 || line >= TROWS) return;
+ const uint16_t ypos = MYPOS(line) + 1;
+ DWINUI::Draw_Box(1, HMI_data.Background_Color, {LBLX, ypos, DWIN_WIDTH - LBLX, MLINE - 2});
+}
+
+void Draw_Menu_Line(const uint8_t line, const uint8_t icon /*=0*/, const char * const label /*=nullptr*/, bool more /*=false*/, bool selected /*=false*/) {
if (icon) DWINUI::Draw_Icon(icon, ICOX, MBASE(line) - 3);
if (label) DWINUI::Draw_String(LBLX, MBASE(line) - 1, (char*)label);
if (more) DWINUI::Draw_Icon(ICON_More, VALX + 16, MBASE(line) - 3);
+ if (selected) Draw_Menu_Cursor(line);
DWIN_Draw_HLine(HMI_data.SplitLine_Color, 16, MYPOS(line + 1), 240);
}
+void Draw_Menu_Line(const uint8_t line, const uint8_t icon /*=0*/, FSTR_P label /*=nullptr*/, bool more /*=false*/, bool selected /*=false*/) {
+ Draw_Menu_Line(line, icon, FTOP(label), more, selected);
+}
+
void Draw_Chkb_Line(const uint8_t line, const bool checked) {
DWINUI::Draw_Checkbox(HMI_data.Text_Color, HMI_data.Background_Color, VALX + 3 * DWINUI::fontWidth(), MBASE(line) - 1, checked);
}
+void Show_Chkb_Line(const bool checked) {
+ const uint8_t line = CurrentMenu->line();
+ DWINUI::Draw_Checkbox(HMI_data.Text_Color, HMI_data.Background_Color, VALX + 3 * DWINUI::fontWidth(), MBASE(line) - 1, checked);
+ DWIN_UpdateLCD();
+}
+
+void Toogle_Chkb_Line(bool &checked) {
+ checked = !checked;
+ Show_Chkb_Line(checked);
+}
+
void Draw_Menu_IntValue(uint16_t bcolor, const uint8_t line, uint8_t iNum, const int32_t value /*=0*/) {
DWINUI::Draw_Signed_Int(HMI_data.Text_Color, bcolor, iNum , VALX, MBASE(line) - 1, value);
}
@@ -140,22 +163,11 @@ void onDrawFloatMenu(MenuItemClass* menuitem, int8_t line, uint8_t dp, const flo
DWINUI::Draw_Signed_Float(HMI_data.Text_Color, HMI_data.Background_Color, 3, dp, VALX - dp * DWINUI::fontWidth(DWIN_FONT_MENU), MBASE(line), value);
}
-void onDrawPFloatMenu(MenuItemClass* menuitem, int8_t line) {
+void onDrawPFloatMenu(MenuItemClass* menuitem, int8_t line, uint8_t dp) {
const float value = *(float*)static_cast(menuitem)->value;
- const int8_t dp = UNITFDIGITS;
onDrawFloatMenu(menuitem, line, dp, value);
}
-void onDrawPFloat2Menu(MenuItemClass* menuitem, int8_t line) {
- const float value = *(float*)static_cast(menuitem)->value;
- onDrawFloatMenu(menuitem, line, 2, value);
-}
-
-void onDrawPFloat3Menu(MenuItemClass* menuitem, int8_t line) {
- const float value = *(float*)static_cast(menuitem)->value;
- onDrawFloatMenu(menuitem, line, 3, value);
-}
-
void onDrawChkbMenu(MenuItemClass* menuitem, int8_t line, bool checked) {
onDrawMenuItem(menuitem, line);
Draw_Chkb_Line(line, checked);
@@ -166,13 +178,15 @@ void onDrawChkbMenu(MenuItemClass* menuitem, int8_t line) {
onDrawChkbMenu(menuitem, line, val);
}
-void DrawItemEdit() {
+void DrawItemEdit(const bool selected) {
+ const uint16_t bcolor = selected ? HMI_data.Selected_Color : HMI_data.Background_Color;
+ const uint8_t iNum = 4 - ((MenuData.dp > 0) ? (MenuData.dp - 1) : 0);
switch (checkkey) {
case SetIntNoDraw: if (MenuData.LiveUpdate) MenuData.LiveUpdate(); break;
case SetInt:
- case SetPInt: DWINUI::Draw_Signed_Int(HMI_data.Text_Color, HMI_data.Selected_Color, 4 , VALX, MBASE(CurrentMenu->line()) - 1, MenuData.Value); break;
+ case SetPInt: DWINUI::Draw_Signed_Int(HMI_data.Text_Color, bcolor, iNum , VALX, MBASE(CurrentMenu->line()) - 1, MenuData.Value); break;
case SetFloat:
- case SetPFloat: DWINUI::Draw_Signed_Float(HMI_data.Text_Color, HMI_data.Selected_Color, 3, MenuData.dp, VALX - MenuData.dp * DWINUI::fontWidth(DWIN_FONT_MENU), MBASE(CurrentMenu->line()), MenuData.Value / POW(10, MenuData.dp)); break;
+ case SetPFloat: DWINUI::Draw_Signed_Float(HMI_data.Text_Color, bcolor, iNum, MenuData.dp, VALX - 2 * DWINUI::fontWidth(), MBASE(CurrentMenu->line()), MenuData.Value / POW(10, MenuData.dp)); break;
default: break;
}
}
@@ -209,7 +223,7 @@ void SetOnClick(uint8_t process, const int32_t lo, const int32_t hi, uint8_t dp,
// Apply: update function when the encoder is pressed
void SetValueOnClick(uint8_t process, const int32_t lo, const int32_t hi, const int32_t val, void (*Apply)() /*= nullptr*/, void (*LiveUpdate)() /*= nullptr*/) {
SetOnClick(process, lo, hi, 0, val, Apply, LiveUpdate);
- Draw_Menu_IntValue(HMI_data.Selected_Color, CurrentMenu->line(), 4, MenuData.Value);
+ DrawItemEdit(true);
}
// Generic onclick event for float values
@@ -222,7 +236,7 @@ void SetValueOnClick(uint8_t process, const int32_t lo, const int32_t hi, const
void SetValueOnClick(uint8_t process, const float lo, const float hi, uint8_t dp, const float val, void (*Apply)() /*= nullptr*/, void (*LiveUpdate)() /*= nullptr*/) {
const int32_t value = round(val * POW(10, dp));
SetOnClick(process, lo * POW(10, dp), hi * POW(10, dp), dp, value, Apply, LiveUpdate);
- DWINUI::Draw_Signed_Float(HMI_data.Text_Color, HMI_data.Selected_Color, 3, dp, VALX - dp * DWINUI::fontWidth(DWIN_FONT_MENU), MBASE(CurrentMenu->line()), val);
+ DrawItemEdit(true);
}
// Generic onclick event for integer values
@@ -271,8 +285,8 @@ void SetPFloatOnClick(const float lo, const float hi, uint8_t dp, void (*Apply)(
// Generic menu control using the encoder
void HMI_Menu() {
EncoderState encoder_diffState = get_encoder_state();
- if (encoder_diffState == ENCODER_DIFF_NO) return;
if (CurrentMenu) {
+ if (encoder_diffState == ENCODER_DIFF_NO) return;
if (encoder_diffState == ENCODER_DIFF_ENTER)
CurrentMenu->onClick();
else
@@ -280,65 +294,46 @@ void HMI_Menu() {
}
}
-// Get an integer value using the encoder without draw anything
-// lo: low limit
-// hi: high limit
+// Get a value using the encoder
+// draw : draw the value
// Return value:
// 0 : no change
// 1 : live change
// 2 : apply change
-int8_t HMI_GetIntNoDraw(const int32_t lo, const int32_t hi) {
+int8_t HMI_Get(bool draw) {
+ const int32_t lo = MenuData.MinValue;
+ const int32_t hi = MenuData.MaxValue;
const int32_t cval = MenuData.Value;
- EncoderState encoder_diffState = Encoder_ReceiveAnalyze();
+ EncoderState encoder_diffState = get_encoder_state();
if (encoder_diffState != ENCODER_DIFF_NO) {
if (Apply_Encoder(encoder_diffState, MenuData.Value)) {
EncoderRate.enabled = false;
+ if (draw) DrawItemEdit(false);
checkkey = Menu;
return 2;
}
LIMIT(MenuData.Value, lo, hi);
}
- return int8_t(cval != MenuData.Value);
+ const bool change = cval != MenuData.Value;
+ if (change) DrawItemEdit(true);
+ return int8_t(change);
}
-// Get an integer value using the encoder
-// lo: low limit
-// hi: high limit
-// Return value:
-// 0 : no change
-// 1 : live change
-// 2 : apply change
-int8_t HMI_GetInt(const int32_t lo, const int32_t hi) {
- EncoderState encoder_diffState = Encoder_ReceiveAnalyze();
- if (encoder_diffState != ENCODER_DIFF_NO) {
- if (Apply_Encoder(encoder_diffState, MenuData.Value)) {
- EncoderRate.enabled = false;
- DWINUI::Draw_Signed_Int(HMI_data.Text_Color, HMI_data.Background_Color, 4 , VALX, MBASE(CurrentMenu->line()) - 1, MenuData.Value);
- checkkey = Menu;
- return 2;
- }
- LIMIT(MenuData.Value, lo, hi);
- DrawItemEdit();
- return 1;
- }
- return 0;
-}
-
-// Set an integer using the encoder
-void HMI_SetInt() {
- int8_t val = HMI_GetInt(MenuData.MinValue, MenuData.MaxValue);
+// Set and draw a value using the encoder
+void HMI_SetDraw() {
+ int8_t val = HMI_Get(true);
switch (val) {
- case 0: return; break;
+ case 0: return;
case 1: if (MenuData.LiveUpdate) MenuData.LiveUpdate(); break;
case 2: if (MenuData.Apply) MenuData.Apply(); break;
}
}
-// Set an integer without drawing
-void HMI_SetIntNoDraw() {
- int8_t val = HMI_GetIntNoDraw(MenuData.MinValue, MenuData.MaxValue);
+// Set an value without drawing
+void HMI_SetNoDraw() {
+ int8_t val = HMI_Get(false);
switch (val) {
- case 0: return; break;
+ case 0: return;
case 1: if (MenuData.LiveUpdate) MenuData.LiveUpdate(); break;
case 2: if (MenuData.Apply) MenuData.Apply(); break;
}
@@ -346,7 +341,7 @@ void HMI_SetIntNoDraw() {
// Set an integer pointer variable using the encoder
void HMI_SetPInt() {
- int8_t val = HMI_GetInt(MenuData.MinValue, MenuData.MaxValue);
+ int8_t val = HMI_Get(true);
switch (val) {
case 0: return;
case 1: if (MenuData.LiveUpdate) MenuData.LiveUpdate(); break;
@@ -354,43 +349,9 @@ void HMI_SetPInt() {
}
}
-// Get a scaled float value using the encoder
-// dp: decimal places
-// lo: scaled low limit
-// hi: scaled high limit
-// Return value:
-// 0 : no change
-// 1 : live change
-// 2 : apply change
-int8_t HMI_GetFloat(uint8_t dp, int32_t lo, int32_t hi) {
- EncoderState encoder_diffState = Encoder_ReceiveAnalyze();
- if (encoder_diffState != ENCODER_DIFF_NO) {
- if (Apply_Encoder(encoder_diffState, MenuData.Value)) {
- EncoderRate.enabled = false;
- DWINUI::Draw_Signed_Float(HMI_data.Text_Color, HMI_data.Background_Color, 3, dp, VALX - dp * DWINUI::fontWidth(DWIN_FONT_MENU), MBASE(CurrentMenu->line()), MenuData.Value / POW(10, dp));
- checkkey = Menu;
- return 2;
- }
- LIMIT(MenuData.Value, lo, hi);
- DrawItemEdit();
- return 1;
- }
- return 0;
-}
-
-// Set a scaled float using the encoder
-void HMI_SetFloat() {
- const int8_t val = HMI_GetFloat(MenuData.dp, MenuData.MinValue, MenuData.MaxValue);
- switch (val) {
- case 0: return;
- case 1: if (MenuData.LiveUpdate) MenuData.LiveUpdate(); break;
- case 2: if (MenuData.Apply) MenuData.Apply(); break;
- }
-}
-
// Set a scaled float pointer variable using the encoder
void HMI_SetPFloat() {
- const int8_t val = HMI_GetFloat(MenuData.dp, MenuData.MinValue, MenuData.MaxValue);
+ const int8_t val = HMI_Get(true);
switch (val) {
case 0: return;
case 1: if (MenuData.LiveUpdate) MenuData.LiveUpdate(); break;
@@ -398,7 +359,7 @@ void HMI_SetPFloat() {
}
}
-// Menu Classes ===============================================================
+// Menu Class ===============================================================
MenuClass::MenuClass() {
selected = 0;
@@ -407,10 +368,10 @@ MenuClass::MenuClass() {
void MenuClass::draw() {
MenuTitle.draw();
- if (onMenuDraw != nullptr) onMenuDraw(this);
+ Draw_Menu(this);
for (int8_t i = 0; i < MenuItemCount; i++)
MenuItems[i]->draw(i - topline);
- if (onCursorDraw != nullptr) onCursorDraw(line());
+ Draw_Menu_Cursor(line());
DWIN_UpdateLCD();
}
@@ -419,7 +380,7 @@ void MenuClass::onScroll(bool dir) {
if (dir) sel++; else sel--;
LIMIT(sel, 0, MenuItemCount - 1);
if (sel != selected) {
- if (onCursorErase != nullptr) onCursorErase(line());
+ Erase_Menu_Cursor(line());
DWIN_UpdateLCD();
if ((sel - topline) == TROWS) {
DWIN_Frame_AreaMove(1, DWIN_SCROLL_UP, MLINE, DWINUI::backcolor, 0, TITLE_HEIGHT + 1, DWIN_WIDTH, STATUS_Y - 1);
@@ -432,63 +393,70 @@ void MenuClass::onScroll(bool dir) {
MenuItems[sel]->draw(0);
}
selected = sel;
- if (onCursorDraw != nullptr) onCursorDraw(line());
+ Draw_Menu_Cursor(line());
DWIN_UpdateLCD();
}
}
void MenuClass::onClick() {
- if (MenuItems[selected]->onClick != nullptr) (*MenuItems[selected]->onClick)();
+ if (MenuItems[selected]->onClick != nullptr) (*MenuItems[selected]->onClick)();
}
-MenuItemClass *MenuClass::SelectedItem() {
+CustomMenuItemClass *MenuClass::SelectedItem() {
return MenuItems[selected];
}
-MenuItemClass** MenuClass::Items() {
+CustomMenuItemClass** MenuClass::Items() {
return MenuItems;
}
-int8_t MenuClass::count() {
- return MenuItemCount;
+int8_t MenuClass::count() {
+ return MenuItemCount;
};
/* MenuItem Class ===========================================================*/
-MenuItemClass::MenuItemClass(uint8_t cicon, const char * const text, void (*ondraw)(MenuItemClass* menuitem, int8_t line), void (*onclick)()) {
- icon = cicon;
- onClick = onclick;
- onDraw = ondraw;
- const uint8_t len = _MIN(sizeof(caption) - 1, strlen(text));
- memcpy(&caption[0], text, len);
- caption[len] = '\0';
+void CustomMenuItemClass::draw(int8_t line) {
+ if (line < 0 || line >= TROWS) return;
+ if (onDraw != nullptr) (*onDraw)(static_cast(this), line);
+};
+
+void CustomMenuItemClass::redraw(bool erase /*=false*/) {
+ const int8_t line = CurrentMenu->line(this->pos);
+ if (erase) Erase_Menu_Text(line);
+ draw(line);
}
-MenuItemClass::MenuItemClass(uint8_t cicon, uint8_t id, uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, void (*ondraw)(MenuItemClass* menuitem, int8_t line), void (*onclick)()) {
- icon = cicon;
+CustomMenuItemClass::CustomMenuItemClass(OnDrawItem ondraw, OnClickItem onclick) {
onClick = onclick;
- onDraw = ondraw;
+ onDraw = ondraw;
+}
+
+MenuItemClass::MenuItemClass(uint8_t cicon, const char * const text, OnDrawItem ondraw, OnClickItem onclick) : CustomMenuItemClass(ondraw, onclick) {
+ icon = cicon;
+ SetCaption(text);
+}
+
+MenuItemClass::MenuItemClass(uint8_t cicon, uint8_t id, uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, OnDrawItem ondraw, OnClickItem onclick) : CustomMenuItemClass(ondraw, onclick) {
+ icon = cicon;
caption[0] = '\0';
frameid = id;
frame = { x1, y1, x2, y2 };
}
+void MenuItemClass::SetCaption(const char * const text) {
+ const uint8_t len = _MIN(sizeof(caption) - 1, strlen(text));
+ memcpy(&caption[0], text, len);
+ caption[len] = '\0';
+}
+
void MenuItemClass::SetFrame(uint8_t id, uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2) {
caption[0] = '\0';
frameid = id;
frame = { x1, y1, x2, y2 };
}
-void MenuItemClass::draw(int8_t line) {
- if (!WITHIN(line, 0, TROWS - 1)) return;
- if (onDraw != nullptr) (*onDraw)(this, line);
-};
-
-void MenuItemClass::redraw() {
- draw(CurrentMenu->line(this->pos));
-}
-
-MenuItemPtrClass::MenuItemPtrClass(uint8_t cicon, const char * const text, void (*ondraw)(MenuItemClass* menuitem, int8_t line), void (*onclick)(), void* val) : MenuItemClass(cicon, text, ondraw, onclick) {
+MenuItemPtrClass::MenuItemPtrClass(uint8_t cicon, const char * const text, OnDrawItem ondraw, OnClickItem onclick, void* val) : MenuItemClass(cicon, text, ondraw, onclick) {
value = val;
};
@@ -505,38 +473,56 @@ void MenuItemsClear() {
void MenuItemsPrepare(int8_t totalitems) {
MenuItemsClear();
- MenuItemTotal = totalitems;
- MenuItems = new MenuItemClass*[totalitems];
+ MenuItemTotal = _MIN(totalitems, MENU_MAX_ITEMS);
+ MenuItems = new CustomMenuItemClass*[totalitems];
}
-MenuItemClass* MenuItemsAdd(MenuItemClass* menuitem) {
+bool IsMenu(MenuClass* _menu) {
+ return ((checkkey == Menu) && !!CurrentMenu && (CurrentMenu == _menu));
+}
+
+template
+T* MenuItemAdd(T* menuitem) {
MenuItems[MenuItemCount] = menuitem;
menuitem->pos = MenuItemCount++;
return menuitem;
}
-MenuItemClass* MenuItemsAdd(uint8_t cicon, const char * const text/*=nullptr*/, void (*ondraw)(MenuItemClass* menuitem, int8_t line)/*=nullptr*/, void (*onclick)()/*=nullptr*/) {
+CustomMenuItemClass* MenuItemAdd(OnDrawItem ondraw/*=nullptr*/, OnClickItem onclick/*=nullptr*/) {
+ if (MenuItemCount < MenuItemTotal) {
+ CustomMenuItemClass* menuitem = new CustomMenuItemClass(ondraw, onclick);
+ return MenuItemAdd(menuitem);
+ }
+ else return nullptr;
+}
+
+MenuItemClass* MenuItemAdd(uint8_t cicon, const char * const text/*=nullptr*/, OnDrawItem ondraw/*=nullptr*/, OnClickItem onclick/*=nullptr*/) {
if (MenuItemCount < MenuItemTotal) {
MenuItemClass* menuitem = new MenuItemClass(cicon, text, ondraw, onclick);
- return MenuItemsAdd(menuitem);
+ return MenuItemAdd(menuitem);
}
else return nullptr;
}
-MenuItemClass* MenuItemsAdd(uint8_t cicon, uint8_t id, uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, void (*ondraw)(MenuItemClass* menuitem, int8_t line)/*=nullptr*/, void (*onclick)()/*=nullptr*/) {
+MenuItemClass* MenuItemAdd(uint8_t cicon, uint8_t id, uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, OnDrawItem ondraw/*=nullptr*/, OnClickItem onclick/*=nullptr*/) {
if (MenuItemCount < MenuItemTotal) {
MenuItemClass* menuitem = new MenuItemClass(cicon, id, x1, y1, x2, y2, ondraw, onclick);
- return MenuItemsAdd(menuitem);
+ return MenuItemAdd(menuitem);
+ }
+ else return nullptr;
+}
+
+MenuItemClass* EditItemAdd(uint8_t cicon, const char * const text, OnDrawItem ondraw, OnClickItem onclick, void* val) {
+ if (MenuItemCount < MenuItemTotal) {
+ MenuItemClass* menuitem = new MenuItemPtrClass(cicon, text, ondraw, onclick, val);
+ return MenuItemAdd(menuitem);
}
else return nullptr;
}
-MenuItemClass* MenuItemsAdd(uint8_t cicon, const char * const text, void (*ondraw)(MenuItemClass* menuitem, int8_t line), void (*onclick)(), void* val) {
- if (MenuItemCount < MenuItemTotal) {
- MenuItemClass* menuitem = new MenuItemPtrClass(cicon, text, ondraw, onclick, val);
- return MenuItemsAdd(menuitem);
- }
- else return nullptr;
+void InitMenu() {
+ PreviousMenu = nullptr;
+ InvalidateMenu();
}
bool SetMenu(MenuClass* &menu, FSTR_P title, int8_t totalitems) {
@@ -549,6 +535,27 @@ bool SetMenu(MenuClass* &menu, FSTR_P title, int8_t totalitems) {
return NotCurrent;
}
+bool SetMenu(MenuClass* &menu, frame_rect_t cn, FSTR_P title, int8_t totalitems) {
+ if (!menu) menu = new MenuClass();
+ const bool NotCurrent = (CurrentMenu != menu);
+ if (NotCurrent) {
+ if (cn.w != 0)
+ menu->MenuTitle.SetFrame(cn.x, cn.y, cn.w, cn.h);
+ else
+ menu->MenuTitle.SetCaption(title);
+ MenuItemsPrepare(totalitems);
+ }
+ return NotCurrent;
+}
+
+void InvalidateMenu() {
+ if (CurrentMenu) {
+ CurrentMenu->topline = 0;
+ CurrentMenu->selected = 0;
+ CurrentMenu = nullptr;
+ }
+}
+
void UpdateMenu(MenuClass* &menu) {
if (!menu) return;
if (CurrentMenu != menu) {
@@ -558,9 +565,9 @@ void UpdateMenu(MenuClass* &menu) {
menu->draw();
}
-void ReDrawMenu(const bool force/*=false*/) {
- if (CurrentMenu && (force || checkkey == Menu)) CurrentMenu->draw();
- if (force) DrawItemEdit();
+void ReDrawMenu(bool force /*= false*/) {
+ if (CurrentMenu && (force || checkkey==Menu)) CurrentMenu->draw();
+ if (force) DrawItemEdit(true);
}
#endif // DWIN_LCD_PROUI
diff --git a/Marlin/src/lcd/e3v2/proui/menus.h b/Marlin/src/lcd/e3v2/proui/menus.h
index 6a5f8786ca..9bc9d702bd 100644
--- a/Marlin/src/lcd/e3v2/proui/menus.h
+++ b/Marlin/src/lcd/e3v2/proui/menus.h
@@ -23,8 +23,8 @@
/**
* Menu functions for ProUI
* Author: Miguel A. Risco-Castillo
- * Version: 1.5.1
- * Date: 2022/05/23
+ * Version: 1.9.1
+ * Date: 2022/12/02
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as
@@ -44,6 +44,9 @@
#include "dwinui.h"
+#define MENU_CHAR_LIMIT 24
+#define MENU_MAX_ITEMS TERN(SDSORT_LIMIT, SDSORT_LIMIT, 64)
+
typedef struct {
int32_t MaxValue = 0; // Auxiliar max integer/scaled float value
int32_t MinValue = 0; // Auxiliar min integer/scaled float value
@@ -56,46 +59,60 @@ typedef struct {
} MenuData_t;
extern MenuData_t MenuData;
-extern void (*onCursorErase)(const int8_t line);
-extern void (*onCursorDraw)(const int8_t line);
// Auxiliary Macros ===========================================================
// Create and add a MenuItem object to the menu array
-#define BACK_ITEM(H) MenuItemsAdd(ICON_Back, GET_TEXT_F(MSG_BUTTON_BACK), onDrawMenuItem, H)
-#define MENU_ITEM(V...) MenuItemsAdd(V)
-#define EDIT_ITEM(V...) MenuItemsAdd(V)
-#define MENU_ITEM_F(I,L,V...) MenuItemsAdd(I, GET_TEXT_F(L), V)
-#define EDIT_ITEM_F(I,L,V...) MenuItemsAdd(I, GET_TEXT_F(L), V)
+#define SET_MENU(I,L,V) SetMenu(I, GET_TEXT_F(L), V)
+#define SET_MENU_F(I,L,V) SetMenu(I, F(L), V)
+#define SET_MENU_R(I,R,L,V) SetMenu(I, R, GET_TEXT_F(L), V)
+
+#define BACK_ITEM(H) MenuItemAdd(ICON_Back, GET_TEXT_F(MSG_BUTTON_BACK), onDrawMenuItem, H)
+#define MENU_ITEM(I,L,V...) MenuItemAdd(I, GET_TEXT_F(L), V)
+#define EDIT_ITEM(I,L,V...) EditItemAdd(I, GET_TEXT_F(L), V)
+#define MENU_ITEM_F(I,L,V...) MenuItemAdd(I, F(L), V)
+#define EDIT_ITEM_F(I,L,V...) EditItemAdd(I, F(L), V)
// Menu Classes ===============================================================
-class MenuItemClass {
-protected:
+class CustomMenuItemClass;
+class MenuItemClass;
+
+typedef void (*OnDrawCustomItem)(CustomMenuItemClass* menuitem, int8_t line);
+typedef void (*OnDrawItem)(MenuItemClass* menuitem, int8_t line);
+typedef void (*OnClickItem)();
+
+class CustomMenuItemClass {
public:
int8_t pos = 0;
+ OnDrawItem onDraw = nullptr;
+ void (*onClick)() = nullptr;
+ CustomMenuItemClass() {};
+ CustomMenuItemClass(OnDrawItem ondraw=nullptr, OnClickItem onclick=nullptr);
+ virtual ~CustomMenuItemClass(){};
+ virtual void draw(int8_t line);
+ void redraw(bool erase=false);
+};
+
+class MenuItemClass: public CustomMenuItemClass {
+public:
uint8_t icon = 0;
- char caption[32] = "";
+ char caption[MENU_CHAR_LIMIT] = "";
uint8_t frameid = 0;
rect_t frame = {0};
- void (*onDraw)(MenuItemClass* menuitem, int8_t line) = nullptr;
- void (*onClick)() = nullptr;
- MenuItemClass() {};
- MenuItemClass(uint8_t cicon, const char * const text=nullptr, void (*ondraw)(MenuItemClass* menuitem, int8_t line)=nullptr, void (*onclick)()=nullptr);
- // MenuItemClass(uint8_t cicon, FSTR_P text = nullptr, void (*ondraw)(MenuItemClass* menuitem, int8_t line)=nullptr, void (*onclick)()=nullptr) : MenuItemClass(cicon, FTOP(text), ondraw, onclick){}
- MenuItemClass(uint8_t cicon, uint8_t id, uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, void (*ondraw)(MenuItemClass* menuitem, int8_t line)=nullptr, void (*onclick)()=nullptr);
+ using CustomMenuItemClass::CustomMenuItemClass;
+ MenuItemClass(uint8_t cicon, const char * const text=nullptr, OnDrawItem ondraw=nullptr, OnClickItem onclick=nullptr);
+ MenuItemClass(uint8_t cicon, uint8_t id, uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, OnDrawItem ondraw=nullptr, OnClickItem onclick=nullptr);
void SetFrame(uint8_t id, uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2);
- virtual ~MenuItemClass(){};
- virtual void draw(int8_t line);
- void redraw();
+ void SetCaption(const char * const text = nullptr);
};
class MenuItemPtrClass: public MenuItemClass {
public:
void *value = nullptr;
using MenuItemClass::MenuItemClass;
- MenuItemPtrClass(uint8_t cicon, const char * const text, void (*ondraw)(MenuItemClass* menuitem, int8_t line), void (*onclick)(), void* val);
- MenuItemPtrClass(uint8_t cicon, FSTR_P text, void (*ondraw)(MenuItemClass* menuitem, int8_t line), void (*onclick)(), void* val) : MenuItemPtrClass(cicon, FTOP(text), ondraw, onclick, val){}
+ MenuItemPtrClass(uint8_t cicon, const char * const text, OnDrawItem ondraw, OnClickItem onclick, void* val);
+ MenuItemPtrClass(uint8_t cicon, FSTR_P text, OnDrawItem ondraw, OnClickItem onclick, void* val) : MenuItemPtrClass(cicon, FTOP(text), ondraw, onclick, val){}
};
class MenuClass {
@@ -111,12 +128,11 @@ public:
virtual void draw();
virtual void onScroll(bool dir);
void onClick();
- MenuItemClass* SelectedItem();
- static MenuItemClass** Items();
+ CustomMenuItemClass* SelectedItem();
+ static CustomMenuItemClass** Items();
};
extern MenuClass *CurrentMenu;
extern MenuClass *PreviousMenu;
-extern void (*onMenuDraw)(MenuClass* menu);
// Menuitem Drawing functions =================================================
@@ -124,8 +140,12 @@ void Draw_Title(TitleClass* title);
void Draw_Menu(MenuClass* menu);
void Draw_Menu_Cursor(const int8_t line);
void Erase_Menu_Cursor(const int8_t line);
-void Draw_Menu_Line(const uint8_t line, const uint8_t icon=0, const char * const label=nullptr, bool more=false);
+void Erase_Menu_Text(const int8_t line);
+void Draw_Menu_Line(const uint8_t line, const uint8_t icon=0, const char * const label=nullptr, bool more=false, bool selected=false);
+void Draw_Menu_Line(const uint8_t line, const uint8_t icon=0, FSTR_P label=nullptr, bool more=false, bool selected=false);
void Draw_Chkb_Line(const uint8_t line, const bool checked);
+void Show_Chkb_Line(const bool checked);
+void Toogle_Chkb_Line(bool &checked);
void Draw_Menu_IntValue(uint16_t bcolor, const uint8_t line, uint8_t iNum, const int32_t value=0);
void onDrawMenuItem(MenuItemClass* menuitem, int8_t line);
void onDrawSubMenu(MenuItemClass* menuitem, int8_t line);
@@ -134,9 +154,11 @@ void onDrawPIntMenu(MenuItemClass* menuitem, int8_t line);
void onDrawPInt8Menu(MenuItemClass* menuitem, int8_t line);
void onDrawPInt32Menu(MenuItemClass* menuitem, int8_t line);
void onDrawFloatMenu(MenuItemClass* menuitem, int8_t line, uint8_t dp, const float value);
-void onDrawPFloatMenu(MenuItemClass* menuitem, int8_t line);
-void onDrawPFloat2Menu(MenuItemClass* menuitem, int8_t line);
-void onDrawPFloat3Menu(MenuItemClass* menuitem, int8_t line);
+void onDrawPFloatMenu(MenuItemClass* menuitem, int8_t line, uint8_t dp);
+inline void onDrawPFloatMenu(MenuItemClass* menuitem, int8_t line) { onDrawPFloatMenu(menuitem, line, UNITFDIGITS); };
+inline void onDrawPFloat2Menu(MenuItemClass* menuitem, int8_t line) { onDrawPFloatMenu(menuitem, line, 2); };
+inline void onDrawPFloat3Menu(MenuItemClass* menuitem, int8_t line) { onDrawPFloatMenu(menuitem, line, 3); };
+inline void onDrawPFloat4Menu(MenuItemClass* menuitem, int8_t line) { onDrawPFloatMenu(menuitem, line, 4); };
void onDrawChkbMenu(MenuItemClass* menuitem, int8_t line, bool checked);
void onDrawChkbMenu(MenuItemClass* menuitem, int8_t line);
@@ -153,22 +175,28 @@ void SetPFloatOnClick(const float lo, const float hi, uint8_t dp, void (*Apply)(
// HMI user control functions =================================================
void HMI_Menu();
-void HMI_SetInt();
+void HMI_SetDraw();
+void HMI_SetNoDraw();
void HMI_SetPInt();
-void HMI_SetIntNoDraw();
-void HMI_SetFloat();
void HMI_SetPFloat();
// Menu auxiliary functions ===================================================
+// Initialize menu
+void InitMenu();
+
// Create a new menu
bool SetMenu(MenuClass* &menu, FSTR_P title, int8_t totalitems);
+bool SetMenu(MenuClass* &menu, frame_rect_t cn, FSTR_P title, int8_t totalitems);
+
+// Invalidate CurrentMenu to prepare for full menu drawing
+void InvalidateMenu();
//Update the Menu and Draw if it is valid
void UpdateMenu(MenuClass* &menu);
//Redraw the current Menu if it is valid
-void ReDrawMenu(const bool force=false);
+void ReDrawMenu(bool force = false);
// Clear MenuItems array and free MenuItems elements
void MenuItemsClear();
@@ -176,13 +204,17 @@ void MenuItemsClear();
// Prepare MenuItems array
void MenuItemsPrepare(int8_t totalitems);
+// Is the current menu = menu?
+bool IsMenu(MenuClass* menu);
+
// Add elements to the MenuItems array
-MenuItemClass* MenuItemsAdd(uint8_t cicon, const char * const text=nullptr, void (*ondraw)(MenuItemClass* menuitem, int8_t line)=nullptr, void (*onclick)()=nullptr);
-inline MenuItemClass* MenuItemsAdd(uint8_t cicon, FSTR_P text = nullptr, void (*ondraw)(MenuItemClass* menuitem, int8_t line)=nullptr, void (*onclick)()=nullptr) {
- return MenuItemsAdd(cicon, FTOP(text), ondraw, onclick);
+CustomMenuItemClass* MenuItemAdd(OnDrawItem ondraw=nullptr, OnClickItem onclick=nullptr);
+MenuItemClass* MenuItemAdd(uint8_t cicon, const char * const text=nullptr, OnDrawItem ondraw=nullptr, OnClickItem onclick=nullptr);
+inline MenuItemClass* MenuItemAdd(uint8_t cicon, FSTR_P text = nullptr, OnDrawItem ondraw=nullptr, OnClickItem onclick=nullptr) {
+ return MenuItemAdd(cicon, FTOP(text), ondraw, onclick);
}
-MenuItemClass* MenuItemsAdd(uint8_t cicon, uint8_t id, uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, void (*ondraw)(MenuItemClass* menuitem, int8_t line)=nullptr, void (*onclick)()=nullptr);
-MenuItemClass* MenuItemsAdd(uint8_t cicon, const char * const text, void (*ondraw)(MenuItemClass* menuitem, int8_t line), void (*onclick)(), void* val);
-inline MenuItemClass* MenuItemsAdd(uint8_t cicon, FSTR_P text, void (*ondraw)(MenuItemClass* menuitem, int8_t line), void (*onclick)(), void* val) {
- return MenuItemsAdd(cicon, FTOP(text), ondraw, onclick, val);
+MenuItemClass* MenuItemAdd(uint8_t cicon, uint8_t id, uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, OnDrawItem ondraw=nullptr, OnClickItem onclick=nullptr);
+MenuItemClass* EditItemAdd(uint8_t cicon, const char * const text, OnDrawItem ondraw, OnClickItem onclick, void* val);
+inline MenuItemClass* EditItemAdd(uint8_t cicon, FSTR_P text, OnDrawItem ondraw, OnClickItem onclick, void* val) {
+ return EditItemAdd(cicon, FTOP(text), ondraw, onclick, val);
}
diff --git a/Marlin/src/lcd/e3v2/proui/meshviewer.cpp b/Marlin/src/lcd/e3v2/proui/meshviewer.cpp
index 2511d33ff1..18cdffd00d 100644
--- a/Marlin/src/lcd/e3v2/proui/meshviewer.cpp
+++ b/Marlin/src/lcd/e3v2/proui/meshviewer.cpp
@@ -113,8 +113,8 @@ void MeshViewerClass::Draw(bool withsave /*= false*/) {
Title.ShowCaption(GET_TEXT_F(MSG_MESH_VIEWER));
#if USE_UBL_VIEWER
DWINUI::ClearMainArea();
- BedLevelTools.viewer_print_value = true;
- BedLevelTools.Draw_Bed_Mesh(-1, 1, 8, 10 + TITLE_HEIGHT);
+ bedLevelTools.viewer_print_value = true;
+ bedLevelTools.Draw_Bed_Mesh(-1, 1, 8, 10 + TITLE_HEIGHT);
#else
DrawMesh(bedlevel.z_values, GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y);
#endif
@@ -127,7 +127,7 @@ void MeshViewerClass::Draw(bool withsave /*= false*/) {
DWINUI::Draw_Button(BTN_Continue, 86, 305);
#if USE_UBL_VIEWER
- BedLevelTools.Set_Mesh_Viewer_Status();
+ bedLevelTools.Set_Mesh_Viewer_Status();
#else
char str_1[6], str_2[6] = "";
ui.status_printf(0, F("Mesh minZ: %s, maxZ: %s"),
diff --git a/Marlin/src/lcd/e3v2/proui/plot.cpp b/Marlin/src/lcd/e3v2/proui/plot.cpp
index cb1f6c2dda..75917320a4 100644
--- a/Marlin/src/lcd/e3v2/proui/plot.cpp
+++ b/Marlin/src/lcd/e3v2/proui/plot.cpp
@@ -23,8 +23,8 @@
/**
* DWIN Single var plot
* Author: Miguel A. Risco-Castillo
- * Version: 2.0
- * Date: 2022/01/31
+ * Version: 2.1.2
+ * Date: 2022/11/20
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as
@@ -44,14 +44,9 @@
#include "../../../inc/MarlinConfigPre.h"
-#ifdef DWIN_LCD_PROUI
-
-#include "dwin_defines.h"
-
-#if HAS_PIDPLOT
+#if BOTH(DWIN_LCD_PROUI, HAS_PIDPLOT)
#include "plot.h"
-
#include "../../../core/types.h"
#include "../../marlinui.h"
#include "dwin_lcd.h"
@@ -74,7 +69,7 @@ void PlotClass::Draw(const frame_rect_t frame, const float max, const float ref)
y2 = frame.y + frame.h - 1;
r = round((y2) - ref * scale);
DWINUI::Draw_Box(1, Plot_Bg_Color, frame);
- for (uint8_t i = 1; i < 4; i++) if (i * 50 < frame.w) DWIN_Draw_VLine(Line_Color, i * 50 + frame.x, frame.y, frame.h);
+ for (uint8_t i = 1; i < 4; i++) if (i * 50 < frame.w) DWIN_Draw_VLine(Line_Color, i * 50 + frame.x, frame.y, frame.h);
DWINUI::Draw_Box(0, Color_White, DWINUI::ExtendFrame(frame, 1));
DWIN_Draw_HLine(Color_Red, frame.x, r, frame.w);
}
@@ -94,6 +89,4 @@ void PlotClass::Update(const float value) {
grphpoints++;
}
-#endif // HAS_PIDPLOT
-
-#endif // DWIN_LCD_PROUI
+#endif // DWIN_LCD_PROUI && HAS_PIDPLOT
diff --git a/Marlin/src/lcd/e3v2/proui/plot.h b/Marlin/src/lcd/e3v2/proui/plot.h
index 8522c530bd..ea15255fe5 100644
--- a/Marlin/src/lcd/e3v2/proui/plot.h
+++ b/Marlin/src/lcd/e3v2/proui/plot.h
@@ -23,8 +23,8 @@
/**
* DWIN Single var plot
* Author: Miguel A. Risco-Castillo
- * Version: 1.0
- * Date: 2022/01/30
+ * Version: 2.1.2
+ * Date: 2022/11/20
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as
diff --git a/Marlin/src/lcd/e3v2/proui/printstats.cpp b/Marlin/src/lcd/e3v2/proui/printstats.cpp
index 5a7b6c9c41..fc07e3387d 100644
--- a/Marlin/src/lcd/e3v2/proui/printstats.cpp
+++ b/Marlin/src/lcd/e3v2/proui/printstats.cpp
@@ -23,8 +23,8 @@
/**
* Print Stats page for PRO UI
* Author: Miguel A. Risco-Castillo (MRISCOC)
- * Version: 1.3.0
- * Date: 2022/02/24
+ * Version: 1.4.2
+ * Date: 2022/12/03
*/
#include "../../../inc/MarlinConfigPre.h"
@@ -79,4 +79,12 @@ void Goto_PrintStats() {
HMI_SaveProcessID(WaitResponse);
}
+// Print Stats Reset popup
+void Popup_ResetStats() { DWIN_Popup_ConfirmCancel(ICON_Info_0, GET_TEXT_F(MSG_RESET_STATS)); }
+void OnClick_ResetStats() {
+ if (HMI_flag.select_flag) PrintStatsClass::Reset();
+ HMI_ReturnScreen();
+}
+void PrintStatsReset() { Goto_Popup(Popup_ResetStats, OnClick_ResetStats); }
+
#endif // DWIN_LCD_PROUI && PRINTCOUNTER
diff --git a/Marlin/src/lcd/e3v2/proui/printstats.h b/Marlin/src/lcd/e3v2/proui/printstats.h
index 705c923da4..4a38306886 100644
--- a/Marlin/src/lcd/e3v2/proui/printstats.h
+++ b/Marlin/src/lcd/e3v2/proui/printstats.h
@@ -24,8 +24,8 @@
/**
* Print Stats page for PRO UI
* Author: Miguel A. Risco-Castillo (MRISCOC)
- * Version: 1.3.0
- * Date: 2022/02/24
+ * Version: 1.4.2
+ * Date: 2022/12/03
*/
class PrintStatsClass {
@@ -37,3 +37,4 @@ public:
extern PrintStatsClass PrintStats;
void Goto_PrintStats();
+void PrintStatsReset();
diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/advanced_settings.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/advanced_settings.cpp
index e3b95c4cd4..656c1f04d2 100644
--- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/advanced_settings.cpp
+++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/advanced_settings.cpp
@@ -52,7 +52,6 @@ void AdvancedSettingsMenu::onRedraw(draw_mode_t what) {
.enabled(ENABLED(HAS_MULTI_HOTEND))
.tag(6) .button(BTN_POS(1,5), BTN_SIZE(1,1), GET_TEXT_F(MSG_OFFSETS_MENU))
-
.tag(7) .button(BTN_POS(2,1), BTN_SIZE(1,1), GET_TEXT_F(MSG_STEPS_PER_MM))
.tag(8) .button(BTN_POS(2,2), BTN_SIZE(1,1), GET_TEXT_F(MSG_MAX_SPEED))
.tag(9) .button(BTN_POS(2,3), BTN_SIZE(1,1), GET_TEXT_F(MSG_ACCELERATION))
diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h
index 0a74ddd741..3ce7a5aa2b 100644
--- a/Marlin/src/lcd/language/language_en.h
+++ b/Marlin/src/lcd/language/language_en.h
@@ -82,6 +82,7 @@ namespace Language_en {
LSTR MSG_AUTO_HOME_X = _UxGT("Home X");
LSTR MSG_AUTO_HOME_Y = _UxGT("Home Y");
LSTR MSG_AUTO_HOME_Z = _UxGT("Home Z");
+ LSTR MSG_Z_AFTER_HOME = _UxGT("Z After Homing");
LSTR MSG_FILAMENT_SET = _UxGT("Filament Settings");
LSTR MSG_FILAMENT_MAN = _UxGT("Filament Management");
LSTR MSG_MANUAL_LEVELING = _UxGT("Manual Leveling");
@@ -133,6 +134,7 @@ namespace Language_en {
LSTR MSG_PREHEAT_M_BEDONLY = _UxGT("Preheat $ Bed");
LSTR MSG_PREHEAT_M_SETTINGS = _UxGT("Preheat $ Conf");
#endif
+ LSTR MSG_PREHEAT_HOTEND = _UxGT("Preheat Hotend");
LSTR MSG_PREHEAT_CUSTOM = _UxGT("Preheat Custom");
LSTR MSG_COOLDOWN = _UxGT("Cooldown");
@@ -266,6 +268,7 @@ namespace Language_en {
LSTR MSG_UBL_INVALID_SLOT = _UxGT("First Select a Mesh Slot");
LSTR MSG_MESH_LOADED = _UxGT("Mesh %i Loaded");
LSTR MSG_MESH_SAVED = _UxGT("Mesh %i Saved");
+ LSTR MSG_MESH_ACTIVE = _UxGT("Mesh %i active");
LSTR MSG_UBL_NO_STORAGE = _UxGT("No Storage");
LSTR MSG_UBL_SAVE_ERROR = _UxGT("Err: UBL Save");
LSTR MSG_UBL_RESTORE_ERROR = _UxGT("Err: UBL Restore");
@@ -323,6 +326,7 @@ namespace Language_en {
LSTR MSG_MOVE_01IN = _UxGT("Move 0.1in");
LSTR MSG_MOVE_05IN = _UxGT("Move 0.5in");
LSTR MSG_MOVE_1IN = _UxGT("Move 1.0in");
+ LSTR MSG_LIVE_MOVE = _UxGT("Live Move");
LSTR MSG_SPEED = _UxGT("Speed");
LSTR MSG_BED_Z = _UxGT("Bed Z");
LSTR MSG_NOZZLE = _UxGT("Nozzle");
@@ -538,6 +542,7 @@ namespace Language_en {
LSTR MSG_SINGLENOZZLE_WIPE_RETRACT = _UxGT("Wipe Retract");
LSTR MSG_SINGLENOZZLE_RETRACT_SPEED = _UxGT("Retract Speed");
LSTR MSG_FILAMENT_PARK_ENABLED = _UxGT("Park Head");
+ LSTR MSG_PARK_FAILED = _UxGT("Head cannot be parked");
LSTR MSG_SINGLENOZZLE_UNRETRACT_SPEED = _UxGT("Recover Speed");
LSTR MSG_SINGLENOZZLE_FAN_SPEED = _UxGT("Fan Speed");
LSTR MSG_SINGLENOZZLE_FAN_TIME = _UxGT("Fan Time");
@@ -643,6 +648,7 @@ namespace Language_en {
LSTR MSG_MESH_LEVELING = _UxGT("Mesh Leveling");
LSTR MSG_MESH_DONE = _UxGT("Mesh probing done");
LSTR MSG_INFO_STATS_MENU = _UxGT("Printer Stats");
+ LSTR MSG_RESET_STATS = _UxGT("Reset Print Stats?");
LSTR MSG_INFO_BOARD_MENU = _UxGT("Board Info");
LSTR MSG_INFO_THERMISTOR_MENU = _UxGT("Thermistors");
LSTR MSG_INFO_EXTRUDERS = _UxGT("Extruders");
diff --git a/Marlin/src/lcd/marlinui.cpp b/Marlin/src/lcd/marlinui.cpp
index c5df604517..ff12703ca9 100644
--- a/Marlin/src/lcd/marlinui.cpp
+++ b/Marlin/src/lcd/marlinui.cpp
@@ -1650,6 +1650,7 @@ void MarlinUI::init() {
TERN_(HOST_PROMPT_SUPPORT, hostui.prompt_open(PROMPT_INFO, F("UI Aborted"), FPSTR(DISMISS_STR)));
LCD_MESSAGE(MSG_PRINT_ABORTED);
TERN_(HAS_MARLINUI_MENU, return_to_status());
+ TERN_(DWIN_LCD_PROUI, HMI_flag.abort_flag = true);
}
#if BOTH(HAS_MARLINUI_MENU, PSU_CONTROL)
diff --git a/Marlin/src/module/probe.h b/Marlin/src/module/probe.h
index dc2ba45764..96d22fdd38 100644
--- a/Marlin/src/module/probe.h
+++ b/Marlin/src/module/probe.h
@@ -29,6 +29,10 @@
#include "motion.h"
+#if ENABLED(DWIN_LCD_PROUI)
+ #include "../lcd/e3v2/proui/dwin.h"
+#endif
+
#if HAS_BED_PROBE
enum ProbePtRaise : uint8_t {
PROBE_PT_NONE, // No raise or stow after run_z_probe
@@ -45,12 +49,14 @@
#define PROBE_TRIGGERED() (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING)
#endif
-#ifdef Z_AFTER_HOMING
- #define Z_POST_CLEARANCE Z_AFTER_HOMING
+#if ALL(DWIN_LCD_PROUI, INDIVIDUAL_AXIS_HOMING_SUBMENU, MESH_BED_LEVELING)
+ #define Z_POST_CLEARANCE HMI_data.z_after_homing;
+#elif defined(Z_AFTER_HOMING)
+ #define Z_POST_CLEARANCE Z_AFTER_HOMING
#elif defined(Z_HOMING_HEIGHT)
- #define Z_POST_CLEARANCE Z_HOMING_HEIGHT
+ #define Z_POST_CLEARANCE Z_HOMING_HEIGHT
#else
- #define Z_POST_CLEARANCE 10
+ #define Z_POST_CLEARANCE 10
#endif
#if ENABLED(PREHEAT_BEFORE_LEVELING)
@@ -155,7 +161,9 @@ public:
#endif
static void move_z_after_homing() {
- #ifdef Z_AFTER_HOMING
+ #if ALL(DWIN_LCD_PROUI, INDIVIDUAL_AXIS_HOMING_SUBMENU, MESH_BED_LEVELING)
+ do_z_clearance(HMI_data.z_after_homing, true);
+ #elif defined(Z_AFTER_HOMING)
do_z_clearance(Z_AFTER_HOMING, true);
#elif BOTH(Z_AFTER_PROBING, HAS_BED_PROBE)
move_z_after_probing();
diff --git a/Marlin/src/module/settings.cpp b/Marlin/src/module/settings.cpp
index 9a7635fc51..1b6f157479 100644
--- a/Marlin/src/module/settings.cpp
+++ b/Marlin/src/module/settings.cpp
@@ -2527,7 +2527,7 @@ void MarlinSettings::postprocess() {
#endif
//
- // Creality DWIN User Data
+ // DWIN User Data
//
#if ENABLED(DWIN_LCD_PROUI)
{
@@ -2852,7 +2852,7 @@ void MarlinSettings::postprocess() {
#endif
#if ENABLED(DWIN_LCD_PROUI)
- status = !BedLevelTools.meshvalidate();
+ status = !bedLevelTools.meshvalidate();
if (status) {
bedlevel.invalidate();
LCD_MESSAGE(MSG_UBL_MESH_INVALID);
diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp
index cd76dac326..d01b4bc142 100644
--- a/Marlin/src/module/temperature.cpp
+++ b/Marlin/src/module/temperature.cpp
@@ -657,7 +657,7 @@ volatile bool Temperature::raw_temps_ready = false;
TERN_(HAS_FAN_LOGIC, fan_update_ms = next_temp_ms + fan_update_interval_ms);
TERN_(EXTENSIBLE_UI, ExtUI::onPidTuning(ExtUI::result_t::PID_STARTED));
- TERN_(DWIN_LCD_PROUI, DWIN_PidTuning(isbed ? PID_BED_START : PID_EXTR_START));
+ TERN_(DWIN_LCD_PROUI, DWIN_PidTuning(isbed ? PIDTEMPBED_START : PIDTEMP_START));
if (target > GHV(CHAMBER_MAX_TARGET, BED_MAX_TARGET, temp_range[heater_id].maxtemp - (HOTEND_OVERSHOOT))) {
SERIAL_ECHOPGM(STR_PID_AUTOTUNE);
diff --git a/Marlin/src/sd/cardreader.cpp b/Marlin/src/sd/cardreader.cpp
index 07255f7e7f..3ec1183083 100644
--- a/Marlin/src/sd/cardreader.cpp
+++ b/Marlin/src/sd/cardreader.cpp
@@ -581,7 +581,7 @@ void CardReader::startOrResumeFilePrinting() {
//
void CardReader::endFilePrintNow(TERN_(SD_RESORT, const bool re_sort/*=false*/)) {
TERN_(ADVANCED_PAUSE_FEATURE, did_pause_print = 0);
- TERN_(HAS_DWIN_E3V2_BASIC, HMI_flag.print_finish = flag.sdprinting);
+ TERN_(DWIN_CREALITY_LCD, HMI_flag.print_finish = flag.sdprinting);
flag.abort_sd_printing = false;
if (isFileOpen()) file.close();
TERN_(SD_RESORT, if (re_sort) presort());