From c6ff39cc14fd2dbc656e41736712a37f755499ec Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Sat, 17 Mar 2018 16:49:08 -0500
Subject: [PATCH] Spacing cleanup
---
Marlin/Configuration.h | 30 +++++------
Marlin/src/config/default/Configuration.h | 30 +++++------
.../AlephObjects/TAZ4/Configuration.h | 54 +++++++++----------
.../AliExpress/CL-260/Configuration.h | 30 +++++------
.../config/examples/Anet/A6/Configuration.h | 54 +++++++++----------
.../config/examples/Anet/A8/Configuration.h | 36 ++++++-------
.../examples/Azteeg/X5GT/Configuration.h | 30 +++++------
.../BIBO/TouchX/cyclops/Configuration.h | 30 +++++------
.../BIBO/TouchX/default/Configuration.h | 30 +++++------
.../examples/BQ/Hephestos/Configuration.h | 18 +++----
.../examples/BQ/Hephestos_2/Configuration.h | 24 ++++-----
.../config/examples/BQ/WITBOX/Configuration.h | 18 +++----
.../config/examples/Cartesio/Configuration.h | 30 +++++------
.../examples/Creality/CR-10/Configuration.h | 42 +++++++--------
.../examples/Creality/CR-10S/Configuration.h | 30 +++++------
.../Creality/CR-10mini/Configuration.h | 42 +++++++--------
.../examples/Creality/Ender-2/Configuration.h | 36 ++++++-------
.../examples/Creality/Ender-4/Configuration.h | 42 +++++++--------
.../FolgerTech/i3-2020/Configuration.h | 36 ++++++-------
.../examples/Geeetech/GT2560/Configuration.h | 48 ++++++++---------
.../Geeetech/I3_Pro_X-GT2560/Configuration.h | 30 +++++------
.../Prusa i3 Pro B/bltouch/Configuration.h | 48 ++++++++---------
.../Prusa i3 Pro B/noprobe/Configuration.h | 48 ++++++++---------
.../examples/Infitary/i3-M508/Configuration.h | 36 ++++++-------
.../examples/JGAurora/A5/Configuration.h | 36 ++++++-------
.../examples/MakerParts/Configuration.h | 30 +++++------
.../examples/Malyan/M150/Configuration.h | 30 +++++------
.../examples/Malyan/M200/Configuration.h | 18 +++----
.../Micromake/C1/basic/Configuration.h | 30 +++++------
.../Micromake/C1/enhanced/Configuration.h | 30 +++++------
.../config/examples/Mks/Sbase/Configuration.h | 30 +++++------
.../RepRapWorld/Megatronics/Configuration.h | 30 +++++------
.../config/examples/RigidBot/Configuration.h | 24 ++++-----
.../src/config/examples/SCARA/Configuration.h | 12 ++---
.../config/examples/STM32F10/Configuration.h | 30 +++++------
.../examples/Sanguinololu/Configuration.h | 30 +++++------
.../config/examples/TheBorg/Configuration.h | 30 +++++------
.../config/examples/TinyBoy2/Configuration.h | 54 +++++++++----------
.../config/examples/Tronxy/X1/Configuration.h | 30 +++++------
.../examples/Tronxy/X5S/Configuration.h | 30 +++++------
.../examples/Tronxy/XY100/Configuration.h | 42 +++++++--------
.../UltiMachine/Archim2/Configuration.h | 30 +++++------
.../examples/Velleman/K8200/Configuration.h | 42 +++++++--------
.../examples/Velleman/K8400/Configuration.h | 30 +++++------
.../Velleman/K8400/Dual-head/Configuration.h | 30 +++++------
.../Wanhao/Duplicator 6/Configuration.h | 42 +++++++--------
.../examples/adafruit/ST7565/Configuration.h | 30 +++++------
.../FLSUN/auto_calibrate/Configuration.h | 42 +++++++--------
.../delta/FLSUN/kossel/Configuration.h | 42 +++++++--------
.../delta/FLSUN/kossel_mini/Configuration.h | 42 +++++++--------
.../delta/Hatchbox_Alpha/Configuration.h | 42 +++++++--------
.../examples/delta/generic/Configuration.h | 30 +++++------
.../delta/kossel_mini/Configuration.h | 30 +++++------
.../examples/delta/kossel_pro/Configuration.h | 12 ++---
.../examples/delta/kossel_xl/Configuration.h | 24 ++++-----
.../examples/gCreate/gMax1.5+/Configuration.h | 36 ++++++-------
.../config/examples/makibox/Configuration.h | 30 +++++------
.../examples/stm32f103ret6/Configuration.h | 30 +++++------
.../examples/tvrrug/Round2/Configuration.h | 18 +++----
.../src/config/examples/wt150/Configuration.h | 36 ++++++-------
.../config/examples/wt150/Configuration_adv.h | 2 +-
Marlin/src/module/temperature.cpp | 18 +++----
Marlin/src/module/tool_change.cpp | 2 +-
Marlin/src/pins/pins_AZTEEG_X3_PRO.h | 2 +-
64 files changed, 1005 insertions(+), 1005 deletions(-)
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 5e704ee386f..ecd33acd61b 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/default/Configuration.h b/Marlin/src/config/default/Configuration.h
index 5e704ee386f..ecd33acd61b 100644
--- a/Marlin/src/config/default/Configuration.h
+++ b/Marlin/src/config/default/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
index 71ad8bf2e43..16cc665414f 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -378,29 +378,29 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Buda 2.0 on 24V
- #define DEFAULT_Kp 6
- #define DEFAULT_Ki .3
- #define DEFAULT_Kd 125
+ #define DEFAULT_Kp 6
+ #define DEFAULT_Ki .3
+ #define DEFAULT_Kd 125
// Buda 2.0 on 12V
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.01
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.01
+ //#define DEFAULT_Kd 114
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -431,27 +431,27 @@
//#define PID_BED_DEBUG // Sends debug data to the serial port.
//24V 360W silicone heater from NPH on 3mm borosilicate (TAZ 2.2+)
- #define DEFAULT_bedKp 20
- #define DEFAULT_bedKi 5
- #define DEFAULT_bedKd 275
+ #define DEFAULT_bedKp 20
+ #define DEFAULT_bedKi 5
+ #define DEFAULT_bedKd 275
//12v 400W silicone heater from QUDB into 3mm borosilicate (TAZ 1.0+)
//from pidautotune
- //#define DEFAULT_bedKp 650
- //#define DEFAULT_bedKi 60
- //#define DEFAULT_bedKd 1800
+ //#define DEFAULT_bedKp 650
+ //#define DEFAULT_bedKi 60
+ //#define DEFAULT_bedKd 1800
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- //#define DEFAULT_bedKp 10.00
- //#define DEFAULT_bedKi .023
- //#define DEFAULT_bedKd 305.4
+ //#define DEFAULT_bedKp 10.00
+ //#define DEFAULT_bedKi .023
+ //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
index c29284e7c31..9cd2f85f922 100644
--- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
+++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h
index cf7e16f48db..3022b8858fc 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration.h
@@ -379,30 +379,30 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
// ANET A6 Firmware V2.0 Standard Extruder defaults:
// PID-P: +022.20, PID-I: +001.08, PID-D: +114.00, PID-C: 1
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114.0
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114.0
// Tuned by ralf-e. Always re-tune for your machine!
- #define DEFAULT_Kp 16.83
- #define DEFAULT_Ki 1.02
- #define DEFAULT_Kd 69.29
+ #define DEFAULT_Kp 16.83
+ #define DEFAULT_Ki 1.02
+ #define DEFAULT_Kd 69.29
#endif // PIDTEMP
@@ -434,24 +434,24 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- //#define DEFAULT_bedKp 10.00
- //#define DEFAULT_bedKi .023
- //#define DEFAULT_bedKd 305.4
+ //#define DEFAULT_bedKp 10.00
+ //#define DEFAULT_bedKi .023
+ //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// ANET A6
// original Bed + 0.3mm Heat conducting into 4mm borosilicate (PID-Autotune: M303 E-1 S60 C5):
- //#define DEFAULT_bedKp 295.00
- //#define DEFAULT_bedKi 35.65
- //#define DEFAULT_bedKd 610.21
- #define DEFAULT_bedKp 295.00
- #define DEFAULT_bedKi 35.65
- #define DEFAULT_bedKd 610.21
+ //#define DEFAULT_bedKp 295.00
+ //#define DEFAULT_bedKi 35.65
+ //#define DEFAULT_bedKd 610.21
+ #define DEFAULT_bedKp 295.00
+ #define DEFAULT_bedKi 35.65
+ #define DEFAULT_bedKd 610.21
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h
index 19eca58434d..5bd7319e71d 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration.h
@@ -380,25 +380,25 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- //#define DEFAULT_Kp 21.0
- //#define DEFAULT_Ki 1.25
- //#define DEFAULT_Kd 86.0
+ //#define DEFAULT_Kp 21.0
+ //#define DEFAULT_Ki 1.25
+ //#define DEFAULT_Kd 86.0
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
// ANET A8 Standard Extruder at 210 Degree Celsius and 100% Fan
//(measured after M106 S255 with M303 E0 S210 C8)
- #define DEFAULT_Kp 21.0
- #define DEFAULT_Ki 1.25
- #define DEFAULT_Kd 86.0
+ #define DEFAULT_Kp 21.0
+ #define DEFAULT_Ki 1.25
+ #define DEFAULT_Kd 86.0
#endif // PIDTEMP
@@ -430,15 +430,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
index beb8672de0d..82d0bbb117d 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
index a4fede66f0a..c8894049fd0 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 23.89
- #define DEFAULT_Ki 1.37
- #define DEFAULT_Kd 104.5
+ #define DEFAULT_Kp 23.89
+ #define DEFAULT_Ki 1.37
+ #define DEFAULT_Kd 104.5
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 23.89
- #define DEFAULT_bedKi 1.37
- #define DEFAULT_bedKd 104.5
+ #define DEFAULT_bedKp 23.89
+ #define DEFAULT_bedKi 1.37
+ #define DEFAULT_bedKd 104.5
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
index cdb29c6fad1..0c8352dc034 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 23.89
- #define DEFAULT_Ki 1.37
- #define DEFAULT_Kd 104.5
+ #define DEFAULT_Kp 23.89
+ #define DEFAULT_Ki 1.37
+ #define DEFAULT_Kd 104.5
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 23.89
- #define DEFAULT_bedKi 1.37
- #define DEFAULT_bedKd 104.5
+ #define DEFAULT_bedKp 23.89
+ #define DEFAULT_bedKi 1.37
+ #define DEFAULT_bedKd 104.5
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
index 76e02b8a700..79ee0909939 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
@@ -377,9 +377,9 @@
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// Hephestos i3
- #define DEFAULT_Kp 23.05
- #define DEFAULT_Ki 2.00
- #define DEFAULT_Kd 66.47
+ #define DEFAULT_Kp 23.05
+ #define DEFAULT_Ki 2.00
+ #define DEFAULT_Kd 66.47
#endif // PIDTEMP
@@ -411,15 +411,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
index 052ac93490a..addbfce64b2 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
@@ -385,14 +385,14 @@
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// Tuned PID values using M303
- #define DEFAULT_Kp 19.18
- #define DEFAULT_Ki 1.36
- #define DEFAULT_Kd 67.42
+ #define DEFAULT_Kp 19.18
+ #define DEFAULT_Ki 1.36
+ #define DEFAULT_Kd 67.42
// BQ firmware stock PID values
- //#define DEFAULT_Kp 10.7
- //#define DEFAULT_Ki 0.45
- //#define DEFAULT_Kd 3
+ //#define DEFAULT_Kp 10.7
+ //#define DEFAULT_Ki 0.45
+ //#define DEFAULT_Kd 3
#endif // PIDTEMP
@@ -424,15 +424,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
index 4552e140748..6b46cce3c4a 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
@@ -377,9 +377,9 @@
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// Witbox
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
#endif // PIDTEMP
@@ -411,15 +411,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h
index 86a8d1d3699..b0869aeed29 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration.h
@@ -380,19 +380,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Cartesio extruderV6 40W Normal
- #define DEFAULT_Kp 18
- #define DEFAULT_Ki 1
- #define DEFAULT_Kd 100
+ #define DEFAULT_Kp 18
+ #define DEFAULT_Ki 1
+ #define DEFAULT_Kd 100
// Cartesio extruderV6 40W Volcano
- //#define DEFAULT_Kp 50
- //#define DEFAULT_Ki 9
- //#define DEFAULT_Kd 70
+ //#define DEFAULT_Kp 50
+ //#define DEFAULT_Ki 9
+ //#define DEFAULT_Kd 70
// Cartesio extruderV6 40W Cyclops
- //#define DEFAULT_Kp 18
- //#define DEFAULT_Ki 1
- //#define DEFAULT_Kd 100
+ //#define DEFAULT_Kp 18
+ //#define DEFAULT_Ki 1
+ //#define DEFAULT_Kd 100
#endif // PIDTEMP
@@ -423,14 +423,14 @@
//#define PID_BED_DEBUG // Sends debug data to the serial port.
//24V 500W silicone heater on to 4mm glass CartesioW
- #define DEFAULT_bedKp 390
- #define DEFAULT_bedKi 70
- #define DEFAULT_bedKd 546
+ #define DEFAULT_bedKp 390
+ #define DEFAULT_bedKi 70
+ #define DEFAULT_bedKd 546
//24V 250W silicone heater on to 4mm glass CartesioM
- //#define DEFAULT_bedKp 303
- //#define DEFAULT_bedKi 42
- //#define DEFAULT_bedKd 539
+ //#define DEFAULT_bedKp 303
+ //#define DEFAULT_bedKi 42
+ //#define DEFAULT_bedKd 539
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
index dea648e465b..a0b5592dd99 100755
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
@@ -379,24 +379,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Stock CR-10 tuned for 70C
- #define DEFAULT_Kp 22.57
- #define DEFAULT_Ki 1.72
- #define DEFAULT_Kd 73.96
+ #define DEFAULT_Kp 22.57
+ #define DEFAULT_Ki 1.72
+ #define DEFAULT_Kd 73.96
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -427,21 +427,21 @@
//#define PID_BED_DEBUG // Sends debug data to the serial port.
//Stock CR-10 Bed Tuned for 70C
- #define DEFAULT_bedKp 426.68
- #define DEFAULT_bedKi 78.92
- #define DEFAULT_bedKd 576.71
+ #define DEFAULT_bedKp 426.68
+ #define DEFAULT_bedKi 78.92
+ #define DEFAULT_bedKd 576.71
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- //#define DEFAULT_bedKp 10.00
- //#define DEFAULT_bedKi .023
- //#define DEFAULT_bedKd 305.4
+ //#define DEFAULT_bedKp 10.00
+ //#define DEFAULT_bedKi .023
+ //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
index cf31bcbfff8..ae6ac2e747f 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
index 13ff2cf96d3..8088682f16e 100644
--- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
@@ -388,24 +388,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Stock CR-10 tuned for 70C
- #define DEFAULT_Kp 22.57
- #define DEFAULT_Ki 1.72
- #define DEFAULT_Kd 73.96
+ #define DEFAULT_Kp 22.57
+ #define DEFAULT_Ki 1.72
+ #define DEFAULT_Kd 73.96
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -436,21 +436,21 @@
//#define PID_BED_DEBUG // Sends debug data to the serial port.
//Stock CR-10 Bed Tuned for 70C
- #define DEFAULT_bedKp 426.68
- #define DEFAULT_bedKi 78.92
- #define DEFAULT_bedKd 576.71
+ #define DEFAULT_bedKp 426.68
+ #define DEFAULT_bedKi 78.92
+ #define DEFAULT_bedKd 576.71
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- //#define DEFAULT_bedKp 10.00
- //#define DEFAULT_bedKi .023
- //#define DEFAULT_bedKd 305.4
+ //#define DEFAULT_bedKp 10.00
+ //#define DEFAULT_bedKi .023
+ //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
index cbbc61874c8..6e3ffc56631 100644
--- a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
@@ -378,24 +378,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Creality Ender
- #define DEFAULT_Kp 21.73
- #define DEFAULT_Ki 1.54
- #define DEFAULT_Kd 76.55
+ #define DEFAULT_Kp 21.73
+ #define DEFAULT_Ki 1.54
+ #define DEFAULT_Kd 76.55
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -427,15 +427,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
index 35396083e3c..2873a3f954c 100644
--- a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
@@ -379,24 +379,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ender-4
- #define DEFAULT_Kp 22.57
- #define DEFAULT_Ki 1.72
- #define DEFAULT_Kd 73.96
+ #define DEFAULT_Kp 22.57
+ #define DEFAULT_Ki 1.72
+ #define DEFAULT_Kd 73.96
// Ultimaker
-// #define DEFAULT_Kp 22.2
-// #define DEFAULT_Ki 1.08
-// #define DEFAULT_Kd 114
+// #define DEFAULT_Kp 22.2
+// #define DEFAULT_Ki 1.08
+// #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -427,21 +427,21 @@
//#define PID_BED_DEBUG // Sends debug data to the serial port.
// Ender-4
- #define DEFAULT_bedKp 426.68
- #define DEFAULT_bedKi 78.92
- #define DEFAULT_bedKd 576.71
+ #define DEFAULT_bedKp 426.68
+ #define DEFAULT_bedKi 78.92
+ #define DEFAULT_bedKd 576.71
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- //#define DEFAULT_bedKp 10.00
- //#define DEFAULT_bedKi .023
- //#define DEFAULT_bedKd 305.4
+ //#define DEFAULT_bedKp 10.00
+ //#define DEFAULT_bedKi .023
+ //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
index 32a8bfc986f..9e8b9c68605 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -380,24 +380,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// FolgerTech i3-2020
- #define DEFAULT_Kp 11.50
- #define DEFAULT_Ki 0.50
- #define DEFAULT_Kd 60.00
+ #define DEFAULT_Kp 11.50
+ #define DEFAULT_Ki 0.50
+ #define DEFAULT_Kd 60.00
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -429,15 +429,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 250.0
- #define DEFAULT_bedKi 18.0
- #define DEFAULT_bedKd 950.0
+ #define DEFAULT_bedKp 250.0
+ #define DEFAULT_bedKi 18.0
+ #define DEFAULT_bedKd 950.0
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
index 62f36220235..f1cf2387201 100644
--- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
@@ -377,31 +377,31 @@
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// Geeetech MK8 Extruder
- #define DEFAULT_Kp 12.33
- #define DEFAULT_Ki 0.51
- #define DEFAULT_Kd 74.50
+ #define DEFAULT_Kp 12.33
+ #define DEFAULT_Ki 0.51
+ #define DEFAULT_Kd 74.50
// CTC MK8 Extruder
- //#define DEFAULT_Kp 19.86
- //#define DEFAULT_Ki 1.0
- //#define DEFAULT_Kd 98.83
+ //#define DEFAULT_Kp 19.86
+ //#define DEFAULT_Ki 1.0
+ //#define DEFAULT_Kd 98.83
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -432,21 +432,21 @@
//#define PID_BED_DEBUG // Sends debug data to the serial port.
//12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X)
- #define DEFAULT_bedKp 234.88
- #define DEFAULT_bedKi 42.79
- #define DEFAULT_bedKd 322.28
+ #define DEFAULT_bedKp 234.88
+ #define DEFAULT_bedKi 42.79
+ #define DEFAULT_bedKd 322.28
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- //#define DEFAULT_bedKp 10.00
- //#define DEFAULT_bedKi .023
- //#define DEFAULT_bedKd 305.4
+ //#define DEFAULT_bedKp 10.00
+ //#define DEFAULT_bedKi .023
+ //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index 52f4bdf9854..de154a94bee 100644
--- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 6c1beb227f5..aebeb0c620c 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
@@ -377,31 +377,31 @@
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// Geeetech MK8 Extruder
- #define DEFAULT_Kp 12.33
- #define DEFAULT_Ki 0.51
- #define DEFAULT_Kd 74.50
+ #define DEFAULT_Kp 12.33
+ #define DEFAULT_Ki 0.51
+ #define DEFAULT_Kd 74.50
// CTC MK8 Extruder
- //#define DEFAULT_Kp 19.86
- //#define DEFAULT_Ki 1.0
- //#define DEFAULT_Kd 98.83
+ //#define DEFAULT_Kp 19.86
+ //#define DEFAULT_Ki 1.0
+ //#define DEFAULT_Kd 98.83
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -432,21 +432,21 @@
//#define PID_BED_DEBUG // Sends debug data to the serial port.
//12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X)
- #define DEFAULT_bedKp 234.88
- #define DEFAULT_bedKi 42.79
- #define DEFAULT_bedKd 322.28
+ #define DEFAULT_bedKp 234.88
+ #define DEFAULT_bedKi 42.79
+ #define DEFAULT_bedKd 322.28
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- //#define DEFAULT_bedKp 10.00
- //#define DEFAULT_bedKi .023
- //#define DEFAULT_bedKd 305.4
+ //#define DEFAULT_bedKp 10.00
+ //#define DEFAULT_bedKi .023
+ //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index d318bd0fdb0..789bf55a770 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
@@ -377,31 +377,31 @@
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// Geeetech MK8 Extruder
- #define DEFAULT_Kp 12.33
- #define DEFAULT_Ki 0.51
- #define DEFAULT_Kd 74.50
+ #define DEFAULT_Kp 12.33
+ #define DEFAULT_Ki 0.51
+ #define DEFAULT_Kd 74.50
// CTC MK8 Extruder
- //#define DEFAULT_Kp 19.86
- //#define DEFAULT_Ki 1.0
- //#define DEFAULT_Kd 98.83
+ //#define DEFAULT_Kp 19.86
+ //#define DEFAULT_Ki 1.0
+ //#define DEFAULT_Kd 98.83
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -432,21 +432,21 @@
//#define PID_BED_DEBUG // Sends debug data to the serial port.
//12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X)
- #define DEFAULT_bedKp 234.88
- #define DEFAULT_bedKi 42.79
- #define DEFAULT_bedKd 322.28
+ #define DEFAULT_bedKp 234.88
+ #define DEFAULT_bedKi 42.79
+ #define DEFAULT_bedKd 322.28
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- //#define DEFAULT_bedKp 10.00
- //#define DEFAULT_bedKi .023
- //#define DEFAULT_bedKd 305.4
+ //#define DEFAULT_bedKp 10.00
+ //#define DEFAULT_bedKi .023
+ //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
index c14d05336ca..95eb55181df 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
@@ -379,23 +379,23 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
- #define DEFAULT_Kp 213.2
- #define DEFAULT_Ki 1.54
- #define DEFAULT_Kd 765
+ #define DEFAULT_Kp 213.2
+ #define DEFAULT_Ki 1.54
+ #define DEFAULT_Kd 765
#endif // PIDTEMP
@@ -427,15 +427,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h
index b508c104eec..fbb0c3bfe19 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h
@@ -384,24 +384,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
// JGAurora A5 (tuned at 210C)
- #define DEFAULT_Kp 35.3//22.2
- #define DEFAULT_Ki 4.35//1.08
- #define DEFAULT_Kd 71.57//114
+ #define DEFAULT_Kp 35.3//22.2
+ #define DEFAULT_Ki 4.35//1.08
+ #define DEFAULT_Kd 71.57//114
#endif // PIDTEMP
@@ -435,15 +435,15 @@
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
// JGAurora A5 (tuned at 70C)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h
index ab1d475dab2..b8b69fdea4a 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration.h
@@ -399,19 +399,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -443,15 +443,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h
index 6b7ec1445ef..580e891b472 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h
@@ -387,19 +387,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Malyan M150 example
- #define DEFAULT_Kp 29
- #define DEFAULT_Ki 2
- #define DEFAULT_Kd 97
+ #define DEFAULT_Kp 29
+ #define DEFAULT_Ki 2
+ #define DEFAULT_Kd 97
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -431,15 +431,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h
index 41f651c6fda..29c592213f1 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h
@@ -383,14 +383,14 @@
#define DEFAULT_Ki 2.74
#define DEFAULT_Kd 62.35
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -428,9 +428,9 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
index 85922245b04..6352bf8115f 100644
--- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
+++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
index c33f8957c8c..605b9636c44 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h
index cb735271e63..aa22c67896a 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
index bb4406f8e2c..19e08c5a542 100644
--- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h
index 3b06976c848..f70d7f3e8c9 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration.h
@@ -382,19 +382,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Rigidbot hotend
- #define DEFAULT_Kp 16.17
- #define DEFAULT_Ki 0.85
- #define DEFAULT_Kd 76.55
+ #define DEFAULT_Kp 16.17
+ #define DEFAULT_Ki 0.85
+ #define DEFAULT_Kd 76.55
// Base DGlass3D/E3Dv6 hotend
- //#define DEFAULT_Kp 10
- //#define DEFAULT_Ki 0.85
- //#define DEFAULT_Kd 245
+ //#define DEFAULT_Kp 10
+ //#define DEFAULT_Ki 0.85
+ //#define DEFAULT_Kd 245
// E3D w/ rigidbot cartridge
- //#define DEFAULT_Kp 16.30
- //#define DEFAULT_Ki 0.95
- //#define DEFAULT_Kd 69.69
+ //#define DEFAULT_Kp 16.30
+ //#define DEFAULT_Ki 0.95
+ //#define DEFAULT_Kd 69.69
#endif // PIDTEMP
@@ -425,9 +425,9 @@
//#define PID_BED_DEBUG // Sends debug data to the serial port.
//RigidBot, from pid autotune
- #define DEFAULT_bedKp 355
- #define DEFAULT_bedKi 66.5
- #define DEFAULT_bedKd 480
+ #define DEFAULT_bedKp 355
+ #define DEFAULT_bedKi 66.5
+ #define DEFAULT_bedKd 480
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h
index 10ad83591ea..cbc30c91040 100644
--- a/Marlin/src/config/examples/SCARA/Configuration.h
+++ b/Marlin/src/config/examples/SCARA/Configuration.h
@@ -406,9 +406,9 @@
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// Merlin Hotend: From Autotune
- #define DEFAULT_Kp 24.5
- #define DEFAULT_Ki 1.72
- #define DEFAULT_Kd 87.73
+ #define DEFAULT_Kp 24.5
+ #define DEFAULT_Ki 1.72
+ #define DEFAULT_Kd 87.73
#endif // PIDTEMP
@@ -440,9 +440,9 @@
//12v Heatbed Mk3 12V in parallel
//from pidautotune
- #define DEFAULT_bedKp 630.14
- #define DEFAULT_bedKi 121.71
- #define DEFAULT_bedKd 815.64
+ #define DEFAULT_bedKp 630.14
+ #define DEFAULT_bedKi 121.71
+ #define DEFAULT_bedKd 815.64
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h
index 426a96904b3..4413653726f 100644
--- a/Marlin/src/config/examples/STM32F10/Configuration.h
+++ b/Marlin/src/config/examples/STM32F10/Configuration.h
@@ -380,19 +380,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -424,15 +424,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h
index ea3cab23baf..b08301c330e 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/TheBorg/Configuration.h b/Marlin/src/config/examples/TheBorg/Configuration.h
index 068ad3327a1..203a793e308 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 18.21
- #define DEFAULT_Ki 1.42
- #define DEFAULT_Kd 58.34
+ #define DEFAULT_Kp 18.21
+ #define DEFAULT_Ki 1.42
+ #define DEFAULT_Kd 58.34
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 554.16
- #define DEFAULT_bedKi 64.07
- #define DEFAULT_bedKd 1198.25
+ #define DEFAULT_bedKp 554.16
+ #define DEFAULT_bedKi 64.07
+ #define DEFAULT_bedKd 1198.25
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h
index 32dc6af573c..48e5a4aedb4 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h
@@ -406,30 +406,30 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
// TinyBoy2 Extruder - calculated with PID Autotune and tested
// "M303 E0 C8 S200"
- //#define DEFAULT_Kp 25.63
- //#define DEFAULT_Ki 2.66
- //#define DEFAULT_Kd 61.73
+ //#define DEFAULT_Kp 25.63
+ //#define DEFAULT_Ki 2.66
+ //#define DEFAULT_Kd 61.73
// TinyBoy2 Extruder - same, but with fan @ 25% duty
- #define DEFAULT_Kp 26.15
- #define DEFAULT_Ki 2.71
- #define DEFAULT_Kd 63.02
+ #define DEFAULT_Kp 26.15
+ #define DEFAULT_Ki 2.71
+ #define DEFAULT_Kd 63.02
#endif // PIDTEMP
//===========================================================================
@@ -460,29 +460,29 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- //#define DEFAULT_bedKp 10.00
- //#define DEFAULT_bedKi .023
- //#define DEFAULT_bedKd 305.4
+ //#define DEFAULT_bedKp 10.00
+ //#define DEFAULT_bedKi .023
+ //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
// TinyBoy2 heatbed - calculated with PID Autotune and tested
// "M303 E-1 C8 S75"
- //#define DEFAULT_bedKp 421.80
- //#define DEFAULT_bedKi 82.51
- //#define DEFAULT_bedKd 539.06
+ //#define DEFAULT_bedKp 421.80
+ //#define DEFAULT_bedKi 82.51
+ //#define DEFAULT_bedKd 539.06
// TinyBoy2 heatbed - same, but with fan @ 25% duty
// "M303 E-1 C8 S75"
- #define DEFAULT_bedKp 267.54
- #define DEFAULT_bedKi 52.34
- #define DEFAULT_bedKd 341.92
+ #define DEFAULT_bedKp 267.54
+ #define DEFAULT_bedKi 52.34
+ #define DEFAULT_bedKd 341.92
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h
index e55dbeea8b3..1f8773b04aa 100644
--- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Tronxy X1
- #define DEFAULT_Kp 16.20
- #define DEFAULT_Ki 1.11
- #define DEFAULT_Kd 59.06
+ #define DEFAULT_Kp 16.20
+ #define DEFAULT_Ki 1.11
+ #define DEFAULT_Kd 59.06
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
index 1aedb6745c7..e23ee47fba4 100644
--- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
index 3bff569ecbc..ebcc4b57906 100644
--- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
@@ -379,30 +379,30 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- // #define DEFAULT_Kp 22.2
- // #define DEFAULT_Ki 1.08
- // #define DEFAULT_Kd 114
+ // #define DEFAULT_Kp 22.2
+ // #define DEFAULT_Ki 1.08
+ // #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
// TronXY XY-100 Standard Extruder at 210 Degree Celsius and 100% Fan
// (measured after M106 S255 with M303 E0 S210 C8)
- // #define DEFAULT_Kp 20.32
- // #define DEFAULT_Ki 1.18
- // #define DEFAULT_Kd 87.80
+ // #define DEFAULT_Kp 20.32
+ // #define DEFAULT_Ki 1.18
+ // #define DEFAULT_Kd 87.80
// TronXY XY-100 Standard Extruder, from original firmware
- #define DEFAULT_Kp 7.0000
- #define DEFAULT_Ki 2.0000
- #define DEFAULT_Kd 40.0000
+ #define DEFAULT_Kp 7.0000
+ #define DEFAULT_Ki 2.0000
+ #define DEFAULT_Kd 40.0000
#endif // PIDTEMP
@@ -434,15 +434,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
index 6a15edb1d3d..c9dedf10a7d 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
index ea4db8d3888..1b7b99cf973 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
@@ -399,24 +399,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
// Vellemann K8200 Extruder - calculated with PID Autotune and tested
- #define DEFAULT_Kp 24.29
- #define DEFAULT_Ki 1.58
- #define DEFAULT_Kd 93.51
+ #define DEFAULT_Kp 24.29
+ #define DEFAULT_Ki 1.58
+ #define DEFAULT_Kd 93.51
#endif // PIDTEMP
//===========================================================================
@@ -447,23 +447,23 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- //#define DEFAULT_bedKp 10.00
- //#define DEFAULT_bedKi .023
- //#define DEFAULT_bedKd 305.4
+ //#define DEFAULT_bedKp 10.00
+ //#define DEFAULT_bedKi .023
+ //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
// Vellemann K8200 PCB heatbed with standard PCU at 60 degreesC - calculated with PID Autotune and tested
// from pidautotune
- #define DEFAULT_bedKp 341.88
- #define DEFAULT_bedKi 25.32
- #define DEFAULT_bedKd 1153.89
+ #define DEFAULT_bedKp 341.88
+ #define DEFAULT_bedKi 25.32
+ #define DEFAULT_bedKd 1153.89
#endif // PIDTEMPBED
// @section extruder
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h
index f1ed6ca83b3..12dcd506b0d 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- #define DEFAULT_Kp 63.0
- #define DEFAULT_Ki 2.25
- #define DEFAULT_Kd 440
+ #define DEFAULT_Kp 63.0
+ #define DEFAULT_Ki 2.25
+ #define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
index 1f05eb5f885..84207b8ba30 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- #define DEFAULT_Kp 63.0
- #define DEFAULT_Ki 2.25
- #define DEFAULT_Kd 440
+ #define DEFAULT_Kp 63.0
+ #define DEFAULT_Ki 2.25
+ #define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
index 7b75d2cb99b..a80233fbfc7 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
@@ -379,24 +379,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
// Duplicator 6
- #define DEFAULT_Kp 9.12
- #define DEFAULT_Ki 0.41
- #define DEFAULT_Kd 50.98
+ #define DEFAULT_Kp 9.12
+ #define DEFAULT_Ki 0.41
+ #define DEFAULT_Kd 50.98
#endif // PIDTEMP
@@ -428,20 +428,20 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
-// #define DEFAULT_bedKp 10.00
-// #define DEFAULT_bedKi .023
-// #define DEFAULT_bedKd 305.4
+// #define DEFAULT_bedKp 10.00
+// #define DEFAULT_bedKi .023
+// #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// Duplicator 6
- #define DEFAULT_bedKp 124.55
- #define DEFAULT_bedKi 23.46
- #define DEFAULT_bedKd 165.29
+ #define DEFAULT_bedKp 124.55
+ #define DEFAULT_bedKi 23.46
+ #define DEFAULT_bedKd 165.29
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
index dbfe99251a7..9224569fdca 100644
--- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
+++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index f86a01482e3..2fce45490ab 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -379,24 +379,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
//E3D with 30MM fan
- #define DEFAULT_Kp 24.77
- #define DEFAULT_Ki 1.84
- #define DEFAULT_Kd 83.61
+ #define DEFAULT_Kp 24.77
+ #define DEFAULT_Ki 1.84
+ #define DEFAULT_Kd 83.61
#endif // PIDTEMP
@@ -428,20 +428,20 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- //#define DEFAULT_bedKp 10.00
- //#define DEFAULT_bedKi .023
- //#define DEFAULT_bedKd 305.4
+ //#define DEFAULT_bedKp 10.00
+ //#define DEFAULT_bedKi .023
+ //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
//D-force
- #define DEFAULT_bedKp 22.97
- #define DEFAULT_bedKi 3.76
- #define DEFAULT_bedKd 29.2
+ #define DEFAULT_bedKp 22.97
+ #define DEFAULT_bedKi 3.76
+ #define DEFAULT_bedKd 29.2
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
index 8a019325255..fd583418f0d 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -379,24 +379,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
//E3D with 30MM fan
- #define DEFAULT_Kp 24.77
- #define DEFAULT_Ki 1.84
- #define DEFAULT_Kd 83.61
+ #define DEFAULT_Kp 24.77
+ #define DEFAULT_Ki 1.84
+ #define DEFAULT_Kd 83.61
#endif // PIDTEMP
@@ -428,20 +428,20 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- //#define DEFAULT_bedKp 10.00
- //#define DEFAULT_bedKi .023
- //#define DEFAULT_bedKd 305.4
+ //#define DEFAULT_bedKp 10.00
+ //#define DEFAULT_bedKi .023
+ //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
//D-force
- #define DEFAULT_bedKp 22.97
- #define DEFAULT_bedKi 3.76
- #define DEFAULT_bedKd 29.2
+ #define DEFAULT_bedKp 22.97
+ #define DEFAULT_bedKi 3.76
+ #define DEFAULT_bedKd 29.2
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index 82a7eceb845..6f3d1d3df0d 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -379,24 +379,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
//E3D with 30MM fan
- #define DEFAULT_Kp 24.77
- #define DEFAULT_Ki 1.84
- #define DEFAULT_Kd 83.61
+ #define DEFAULT_Kp 24.77
+ #define DEFAULT_Ki 1.84
+ #define DEFAULT_Kd 83.61
#endif // PIDTEMP
@@ -428,20 +428,20 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- //#define DEFAULT_bedKp 10.00
- //#define DEFAULT_bedKi .023
- //#define DEFAULT_bedKd 305.4
+ //#define DEFAULT_bedKp 10.00
+ //#define DEFAULT_bedKi .023
+ //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
//D-force
- #define DEFAULT_bedKp 22.97
- #define DEFAULT_bedKi 3.76
- #define DEFAULT_bedKd 29.2
+ #define DEFAULT_bedKp 22.97
+ #define DEFAULT_bedKi 3.76
+ #define DEFAULT_bedKd 29.2
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
index 0fa49c08abf..281c52649b0 100644
--- a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -384,24 +384,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
// E3D-v6
- #define DEFAULT_Kp 18.55
- #define DEFAULT_Ki 2.71
- #define DEFAULT_Kd 47.69
+ #define DEFAULT_Kp 18.55
+ #define DEFAULT_Ki 2.71
+ #define DEFAULT_Kd 47.69
#endif // PIDTEMP
@@ -433,20 +433,20 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- //#define DEFAULT_bedKp 10.00
- //#define DEFAULT_bedKi .023
- //#define DEFAULT_bedKd 305.4
+ //#define DEFAULT_bedKp 10.00
+ //#define DEFAULT_bedKi .023
+ //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
//HatchBox Alpha
- #define DEFAULT_bedKp 72.11
- #define DEFAULT_bedKi 7.1
- #define DEFAULT_bedKd 488.31
+ #define DEFAULT_bedKp 72.11
+ #define DEFAULT_bedKi 7.1
+ #define DEFAULT_bedKd 488.31
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h
index 71be4a6da60..cb766adb1a7 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
index 6d8d19211da..6630d3ab6c3 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
index 9de4a5ffc44..7dac90c5b76 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
@@ -381,9 +381,9 @@
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// Kossel Pro
- #define DEFAULT_Kp 19.30
- #define DEFAULT_Ki 3.51
- #define DEFAULT_Kd 26.56
+ #define DEFAULT_Kp 19.30
+ #define DEFAULT_Ki 3.51
+ #define DEFAULT_Kd 26.56
#endif // PIDTEMP
@@ -415,9 +415,9 @@
//Kossel Pro heated bed plate with borosilicate glass
//from pidautotune (M303 E-1 S60 C8)
- #define DEFAULT_bedKp 370.25
- #define DEFAULT_bedKi 62.77
- #define DEFAULT_bedKd 545.98
+ #define DEFAULT_bedKp 370.25
+ #define DEFAULT_bedKi 62.77
+ #define DEFAULT_bedKd 545.98
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
index 675f0db972d..7e90a207b85 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
@@ -388,14 +388,14 @@
//#define DEFAULT_Kd 85.30
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -427,15 +427,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 15.00
- #define DEFAULT_bedKi .04
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 15.00
+ #define DEFAULT_bedKi .04
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
index 0de3c3a2e2f..ffd73e7be5e 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -387,24 +387,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// gMax J-Head
- #define DEFAULT_Kp 15.35
- #define DEFAULT_Ki 0.85
- #define DEFAULT_Kd 69.45
+ #define DEFAULT_Kp 15.35
+ #define DEFAULT_Ki 0.85
+ #define DEFAULT_Kd 69.45
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -436,15 +436,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 135.44
- #define DEFAULT_bedKi 24.60
- #define DEFAULT_bedKd 186.40
+ #define DEFAULT_bedKp 135.44
+ #define DEFAULT_bedKi 24.60
+ #define DEFAULT_bedKd 186.40
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h
index 1b9d2f191a9..677d1cd9c56 100644
--- a/Marlin/src/config/examples/makibox/Configuration.h
+++ b/Marlin/src/config/examples/makibox/Configuration.h
@@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -426,15 +426,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
index fe25230107f..9f53458b181 100644
--- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h
+++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
@@ -380,19 +380,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
- #define DEFAULT_Kp 22.2
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -424,15 +424,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
index 2d9fb0813a9..2006c7d0b95 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
@@ -378,9 +378,9 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// J-Head Mk V-B
- #define DEFAULT_Kp 25.05
- #define DEFAULT_Ki 2.30
- #define DEFAULT_Kd 68.15
+ #define DEFAULT_Kp 25.05
+ #define DEFAULT_Ki 2.30
+ #define DEFAULT_Kd 68.15
#endif // PIDTEMP
@@ -412,15 +412,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h
index 043cc9ed6d1..89f7f4df544 100644
--- a/Marlin/src/config/examples/wt150/Configuration.h
+++ b/Marlin/src/config/examples/wt150/Configuration.h
@@ -379,24 +379,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
//WT150, based on: M303 E0 S220 C8
- #define DEFAULT_Kp 22.10
- #define DEFAULT_Ki 1.10
- #define DEFAULT_Kd 110.78
+ #define DEFAULT_Kp 22.10
+ #define DEFAULT_Ki 1.10
+ #define DEFAULT_Kd 110.78
// Ultimaker
- //#define DEFAULT_Kp 22.2
- //#define DEFAULT_Ki 1.08
- //#define DEFAULT_Kd 114
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
// MakerGear
- //#define DEFAULT_Kp 7.0
- //#define DEFAULT_Ki 0.1
- //#define DEFAULT_Kd 12
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
- //#define DEFAULT_Kp 63.0
- //#define DEFAULT_Ki 2.25
- //#define DEFAULT_Kd 440
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
#endif // PIDTEMP
@@ -428,15 +428,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
- //#define DEFAULT_bedKp 97.1
- //#define DEFAULT_bedKi 1.41
- //#define DEFAULT_bedKd 1675.16
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index 106325a0800..7f09efdc9b0 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -1208,7 +1208,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp
index fdefeeff04f..7f3099da8a8 100644
--- a/Marlin/src/module/temperature.cpp
+++ b/Marlin/src/module/temperature.cpp
@@ -452,17 +452,17 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS],
#if HAS_PID_FOR_BOTH
const char* estring = hotend < 0 ? "bed" : "";
- SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Kp ", workKp); SERIAL_EOL();
- SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Ki ", workKi); SERIAL_EOL();
- SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Kd ", workKd); SERIAL_EOL();
+ SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Kp ", workKp); SERIAL_EOL();
+ SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Ki ", workKi); SERIAL_EOL();
+ SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Kd ", workKd); SERIAL_EOL();
#elif ENABLED(PIDTEMP)
- SERIAL_PROTOCOLPAIR("#define DEFAULT_Kp ", workKp); SERIAL_EOL();
- SERIAL_PROTOCOLPAIR("#define DEFAULT_Ki ", workKi); SERIAL_EOL();
- SERIAL_PROTOCOLPAIR("#define DEFAULT_Kd ", workKd); SERIAL_EOL();
+ SERIAL_PROTOCOLPAIR("#define DEFAULT_Kp ", workKp); SERIAL_EOL();
+ SERIAL_PROTOCOLPAIR("#define DEFAULT_Ki ", workKi); SERIAL_EOL();
+ SERIAL_PROTOCOLPAIR("#define DEFAULT_Kd ", workKd); SERIAL_EOL();
#else
- SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKp ", workKp); SERIAL_EOL();
- SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKi ", workKi); SERIAL_EOL();
- SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKd ", workKd); SERIAL_EOL();
+ SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKp ", workKp); SERIAL_EOL();
+ SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKi ", workKi); SERIAL_EOL();
+ SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKd ", workKd); SERIAL_EOL();
#endif
#define _SET_BED_PID() do { \
diff --git a/Marlin/src/module/tool_change.cpp b/Marlin/src/module/tool_change.cpp
index 93a16442b2c..0c8727e31df 100644
--- a/Marlin/src/module/tool_change.cpp
+++ b/Marlin/src/module/tool_change.cpp
@@ -503,7 +503,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#else
constexpr bool safe_to_move = true;
#endif
-
+
// Move to the "old position" (move the extruder into place)
#if ENABLED(SWITCHING_NOZZLE)
destination[Z_AXIS] += z_diff; // Include the Z restore with the "move back"
diff --git a/Marlin/src/pins/pins_AZTEEG_X3_PRO.h b/Marlin/src/pins/pins_AZTEEG_X3_PRO.h
index 159cd0f76fc..5b7de0d6157 100644
--- a/Marlin/src/pins/pins_AZTEEG_X3_PRO.h
+++ b/Marlin/src/pins/pins_AZTEEG_X3_PRO.h
@@ -140,7 +140,7 @@
#undef SD_DETECT_PIN
#define SD_DETECT_PIN 49 // For easy adapter board
#undef BEEPER_PIN
- #define BEEPER_PIN 12 // 33 isn't physically available to the LCD display
+ #define BEEPER_PIN 12 // 33 isn't physically available to the LCD display
#else
#define STAT_LED_RED_PIN 32
#define STAT_LED_BLUE_PIN 35