3DPrinting/MarlinFirmware
0
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2025-03-13 01:40:09 +00:00
Code Issues Releases Wiki Activity

🔧 More suppressible warnings (#27009)

Browse source 
* 🔧 Suppressible LCD contrast warning

* 🔧 Suppressible Z_SAFE_HOMING warning

* 🔧 Suppressible user feedback warning
This commit is contained in:
Keith Bennett 2024-04-28 18:15:07 -07:00 • committed by GitHub
parent 582c5a36d7
commit ca5a7be5e8
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
1 changed files with 6 additions and 6 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

12
Marlin/src/inc/Warnings.cpp
View file

@ -99,8 +99,8 @@
#warning "Warning! Don't use dummy thermistors (998/999) for final build!"
#endif
#if NONE(HAS_RESUME_CONTINUE, HOST_PROMPT_SUPPORT, UNIT_TEST)
#warning "Your Configuration provides no method to acquire user feedback!"
#if NONE(HAS_RESUME_CONTINUE, HOST_PROMPT_SUPPORT, UNIT_TEST, NO_USER_FEEDBACK_WARNING)
#warning "Your Configuration provides no method to acquire user feedback! (Define NO_USER_FEEDBACK_WARNING to suppress this warning.)"
#endif
#if MB(DUE3DOM_MINI) && PIN_EXISTS(TEMP_2) && !TEMP_SENSOR_BOARD
@ -690,8 +690,8 @@
#warning "To prevent step loss, motion will pause for PRINTCOUNTER auto-save."
#endif
#if HOMING_Z_WITH_PROBE && IS_CARTESIAN && DISABLED(Z_SAFE_HOMING)
#error "Z_SAFE_HOMING is recommended when homing with a probe. Enable Z_SAFE_HOMING or comment out this line to continue."
#if HOMING_Z_WITH_PROBE && IS_CARTESIAN && NONE(Z_SAFE_HOMING, NO_Z_SAFE_HOMING_WARNING)
#error "Z_SAFE_HOMING is recommended when homing with a probe. (Enable Z_SAFE_HOMING or define NO_Z_SAFE_HOMING_WARNING to suppress this warning.)"
#endif
#if ENABLED(BIQU_MICROPROBE_V2) && NONE(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, NO_MICROPROBE_WARNING)
@ -718,8 +718,8 @@
#warning "Disabled CONFIGURATION_EMBEDDING because the target usually has less flash storage. Define FORCE_CONFIG_EMBED to override."
#endif
#if HAS_LCD_CONTRAST && LCD_CONTRAST_MIN >= LCD_CONTRAST_MAX
#warning "Contrast cannot be changed when LCD_CONTRAST_MIN >= LCD_CONTRAST_MAX."
#if HAS_LCD_CONTRAST && LCD_CONTRAST_MIN >= LCD_CONTRAST_MAX && DISABLED(NO_LCD_CONTRAST_WARNING)
#warning "Contrast cannot be changed when LCD_CONTRAST_MIN >= LCD_CONTRAST_MAX. (Define NO_LCD_CONTRAST_WARNING to suppress this warning.)"
#endif
#if PROGRESS_MSG_EXPIRE > 0 && HAS_STATUS_MESSAGE_TIMEOUT