3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-23 20:18:52 +00:00
Code Issues Releases Wiki Activity

fix zjerk being the same for delta as xy jerk

Browse Source 
add more delta defaults
on delta make second home even slower
This commit is contained in:
Jim Morris 2013-07-17 16:14:07 -07:00
parent f3aa2a48e7
commit d01ee7e7b5
3 changed files with 11 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/Configuration.h
View File

@ -431,7 +431,11 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
// The speed change that does not require acceleration (i.e. the software might assume it can be done instantaneously) // The speed change that does not require acceleration (i.e. the software might assume it can be done instantaneously)
#define DEFAULT_XYJERK 20.0 // (mm/sec) #define DEFAULT_XYJERK 20.0 // (mm/sec)
#ifdef DELTA
#define DEFAULT_ZJERK 20.0 // (mm/sec) Must be same as XY for delta
#else
#define DEFAULT_ZJERK 0.4 // (mm/sec) #define DEFAULT_ZJERK 0.4 // (mm/sec)
#endif // DELTA
#define DEFAULT_EJERK 5.0 // (mm/sec) #define DEFAULT_EJERK 5.0 // (mm/sec)
//=========================================================================== //===========================================================================

3
Marlin/Configuration_adv.h
View File

@ -177,7 +177,10 @@
#define DEFAULT_MINSEGMENTTIME 20000 #define DEFAULT_MINSEGMENTTIME 20000
// If defined the movements slow down when the look ahead buffer is only half full // If defined the movements slow down when the look ahead buffer is only half full
// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second)
#ifndef DELTA
#define SLOWDOWN #define SLOWDOWN
#endif
// Frequency limit // Frequency limit
// See nophead's blog for more info // See nophead's blog for more info

4
Marlin/Marlin_main.cpp
View File

@ -712,7 +712,11 @@ static void homeaxis(int axis) {
st_synchronize(); st_synchronize();
destination[axis] = 2*home_retract_mm(axis) * home_dir(axis); destination[axis] = 2*home_retract_mm(axis) * home_dir(axis);
#ifdef DELTA
feedrate = homing_feedrate[axis]/10;
#else
feedrate = homing_feedrate[axis]/2 ; feedrate = homing_feedrate[axis]/2 ;
#endif
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
st_synchronize(); st_synchronize();