3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-26 13:25:54 +00:00
Code Issues Releases Wiki Activity

Add macros for ST7565 commands

Browse Source
This commit is contained in:
Scott Lahteine 2018-06-02 01:00:58 -05:00
parent 3b06a8e917
commit d32beafd21
1 changed files with 82 additions and 72 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

154
Marlin/ultralcd_st7565_u8glib_VIKI.h
View File

@ -122,10 +122,26 @@
#define U8G_DELAY() u8g_10MicroDelay()
#endif
#define ST7565_CS() { WRITE(ST7565_CS_PIN,1); U8G_DELAY(); }
#define ST7565_NCS() { WRITE(ST7565_CS_PIN,0); }
#define ST7565_A0() { WRITE(ST7565_A0_PIN,1); U8G_DELAY(); }
#define ST7565_NA0() { WRITE(ST7565_A0_PIN,0); }
#define ST7565_CS() do{ WRITE(ST7565_CS_PIN, HIGH); U8G_DELAY(); }while(0)
#define ST7565_NCS() WRITE(ST7565_CS_PIN, LOW)
#define ST7565_A0() do{ WRITE(ST7565_A0_PIN, HIGH); U8G_DELAY(); }while(0)
#define ST7565_NA0() WRITE(ST7565_A0_PIN, LOW)
#define ST7565_ADC_REVERSE(N) ST7565_WRITE_BYTE(0xA0 | ((N) & 0x1))
#define ST7565_BIAS_MODE(N) ST7565_WRITE_BYTE(0xA2 | ((N) & 0x1))
#define ST7565_ALL_PIX(N) ST7565_WRITE_BYTE(0xA4 | ((N) & 0x1))
#define ST7565_INVERTED(N) ST7565_WRITE_BYTE(0xA6 | ((N) & 0x1))
#define ST7565_ON(N) ST7565_WRITE_BYTE(0xAE | ((N) & 0x1))
#define ST7565_OUT_MODE(N) ST7565_WRITE_BYTE(0xC0 | ((N) & 0x1) << 3)
#define ST7565_POWER_CONTROL(N) ST7565_WRITE_BYTE(0x28 | (N))
#define ST7565_V0_RATIO(N) ST7565_WRITE_BYTE(0x20 | ((N) & 0x7))
#define ST7565_CONTRAST(N) do{ ST7565_WRITE_BYTE(0x81); ST7565_WRITE_BYTE(N); }while(0)
#define ST7565_COLUMN_ADR(N) do{ ST7565_WRITE_BYTE(0x10 | ((N) >> 4) & 0xF); ST7565_WRITE_BYTE(0x00 | ((N) & 0xF)); }while(0)
#define ST7565_PAGE_ADR(N) ST7565_WRITE_BYTE(0xB0 | (N))
#define ST7565_START_LINE(N) ST7565_WRITE_BYTE(0x40 | (N))
#define ST7565_SLEEP_MODE() ST7565_WRITE_BYTE(0xAC)
#define ST7565_NOOP() ST7565_WRITE_BYTE(0xE3)
uint8_t u8g_dev_st7565_64128n_2x_VIKI_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) {
switch (msg) {
@ -137,109 +153,103 @@ uint8_t u8g_dev_st7565_64128n_2x_VIKI_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg
OUT_WRITE(ST7565_CLK_PIN, LOW);
#if HARDWARE_SPI
OUT_WRITE(SDSS, 1); // must be set to an output first or else will never go into master mode
SPCR = 0x50; // enable SPI in master mode at fast speed
SPSR = 1; // kick it up to 2x speed mode
OUT_WRITE(SDSS, 1); // must be set to an output first or else will never go into master mode
SPCR = 0x50; // enable SPI in master mode at fast speed
SPSR = 1; // kick it up to 2x speed mode
#endif
OUT_WRITE(ST7565_A0_PIN, LOW);
ST7565_CS(); /* disable chip */
ST7565_NA0(); /* instruction mode */
ST7565_NCS(); /* enable chip */
ST7565_CS(); // chip select off
ST7565_NA0(); // instruction mode
ST7565_NCS(); // chip select
ST7565_WRITE_BYTE(0x0A2); /* 0x0A2: LCD bias 1/9 (according to Displaytech 64128N datasheet) */
ST7565_WRITE_BYTE(0x0A0); /* Normal ADC Select (according to Displaytech 64128N datasheet) */
ST7565_BIAS_MODE(0); // 0xA2: LCD bias 1/9 (according to Displaytech 64128N datasheet)
ST7565_ADC_REVERSE(0); // Normal (not flipped) ADC Select (according to Displaytech 64128N datasheet)
ST7565_WRITE_BYTE(0x0C8); /* common output mode: set scan direction normal operation/SHL Select; 0x0C0 --> SHL = 0; normal; 0x0C8 --> SHL = 1 */
ST7565_WRITE_BYTE(0x040); /* Display start line for Displaytech 64128N */
ST7565_OUT_MODE(1); // common output mode: set scan direction normal operation/SHL Select; 0x0C0 --> SHL = 0; normal; 0x0C8 --> SHL = 1
ST7565_START_LINE(0); // Display start line for Displaytech 64128N
ST7565_WRITE_BYTE(0x028 | 0x04); /* power control: turn on voltage converter */
//U8G_ESC_DLY(50); /* delay 50 ms - hangs after a reset if used */
//ST7565_POWER_CONTROL(0x4); // power control: turn on Booster
//U8G_ESC_DLY(50); // delay 50 ms - hangs after a reset if used
ST7565_WRITE_BYTE(0x028 | 0x06); /* power control: turn on voltage regulator */
//U8G_ESC_DLY(50); /* delay 50 ms - hangs after a reset if used */
//ST7565_POWER_CONTROL(0x6); // power control: turn on Booster, Voltage Regulator
//U8G_ESC_DLY(50); // delay 50 ms - hangs after a reset if used
ST7565_WRITE_BYTE(0x028 | 0x07); /* power control: turn on voltage follower */
//U8G_ESC_DLY(50); /* delay 50 ms - hangs after a reset if used */
ST7565_POWER_CONTROL(0x7); // power control: turn on Booster, Voltage Regulator, Voltage Follower
//U8G_ESC_DLY(50); // delay 50 ms - hangs after a reset if used
ST7565_WRITE_BYTE(0x010); /* Set V0 voltage resistor ratio. Setting for controlling brightness of Displaytech 64128N */
ST7565_V0_RATIO(0); // Set V0 Voltage Resistor ratio. Setting for controlling brightness of Displaytech 64128N
ST7565_WRITE_BYTE(0x0A6); /* display normal, bit val 0: LCD pixel off. */
ST7565_INVERTED(0); // display normal, bit val 0: LCD pixel off.
ST7565_WRITE_BYTE(0x081); /* set contrast */
ST7565_WRITE_BYTE(0x01E); /* Contrast value. Setting for controlling brightness of Displaytech 64128N */
ST7565_CONTRAST(0x1E); // Contrast value. Setting for controlling contrast of Displaytech 64128N
ST7565_WRITE_BYTE(0x0AF); /* display on */
ST7565_ON(1); // display on
U8G_ESC_DLY(100); /* delay 100 ms */
ST7565_WRITE_BYTE(0x0A5); /* display all points; ST7565 */
U8G_ESC_DLY(100); /* delay 100 ms */
U8G_ESC_DLY(100); /* delay 100 ms */
ST7565_WRITE_BYTE(0x0A4); /* normal display */
ST7565_CS(); /* disable chip */
} /* end of sequence */
U8G_ESC_DLY(100); // delay 100 ms
ST7565_ALL_PIX(1); // display all points; ST7565
U8G_ESC_DLY(100); // delay 100 ms
U8G_ESC_DLY(100); // delay 100 ms
ST7565_ALL_PIX(0); // normal display
ST7565_CS(); // chip select off
} // end of sequence
break;
case U8G_DEV_MSG_STOP: break;
case U8G_DEV_MSG_PAGE_NEXT: {
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
ST7565_CS(); /* disable chip */
ST7565_NA0(); /* instruction mode */
ST7565_NCS(); /* enable chip */
ST7565_WRITE_BYTE(0x010); /* set upper 4 bit of the col adr to 0x10 */
ST7565_WRITE_BYTE(0x000); /* set lower 4 bit of the col adr to 0x00. Changed for DisplayTech 64128N */
/* end of sequence */
ST7565_WRITE_BYTE(0x0B0 | (2*pb->p.page));; /* select current page (ST7565R) */
ST7565_A0(); /* data mode */
ST7560_WriteSequence( (uint8_t) pb->width, (uint8_t *)pb->buf);
ST7565_CS(); /* disable chip */
ST7565_NA0(); /* instruction mode */
ST7565_NCS(); /* enable chip */
ST7565_WRITE_BYTE(0x010); /* set upper 4 bit of the col adr to 0x10 */
ST7565_WRITE_BYTE(0x000); /* set lower 4 bit of the col adr to 0x00. Changed for DisplayTech 64128N */
/* end of sequence */
ST7565_WRITE_BYTE(0x0B0 | (2*pb->p.page+1)); /* select current page (ST7565R) */
ST7565_A0(); /* data mode */
ST7560_WriteSequence( (uint8_t) pb->width, (uint8_t *)(pb->buf)+pb->width);
ST7565_CS(); /* disable chip */
u8g_pb_t *pb = (u8g_pb_t*)(dev->dev_mem);
ST7565_CS(); // chip select off
ST7565_NA0(); // instruction mode
ST7565_NCS(); // chip select
ST7565_COLUMN_ADR(0x00); // high 4 bits to 0, low 4 bits to 0. Changed for DisplayTech 64128N
// end of sequence
ST7565_PAGE_ADR(2 * pb->p.page); // select current page (ST7565R)
ST7565_A0(); // data mode
ST7560_WriteSequence((uint8_t)pb->width, (uint8_t*)pb->buf);
ST7565_CS(); // chip select off
ST7565_NA0(); // instruction mode
ST7565_NCS(); // chip select
ST7565_COLUMN_ADR(0x00); // high 4 bits to 0, low 4 bits to 0
// end of sequence
ST7565_PAGE_ADR(2 * pb->p.page + 1); // select current page (ST7565R)
ST7565_A0(); // data mode
ST7560_WriteSequence((uint8_t)pb->width, (uint8_t*)(pb->buf) + pb->width);
ST7565_CS(); // chip select off
}
break;
case U8G_DEV_MSG_CONTRAST:
ST7565_NCS();
ST7565_NA0(); /* instruction mode */
ST7565_WRITE_BYTE(0x081);
ST7565_WRITE_BYTE((*(uint8_t *)arg) >> 2);
ST7565_CS(); /* disable chip */
ST7565_NA0(); // instruction mode
ST7565_CONTRAST((*(uint8_t*)arg) >> 2);
ST7565_CS(); // chip select off
return 1;
case U8G_DEV_MSG_SLEEP_ON:
ST7565_NA0(); /* instruction mode */
ST7565_NCS(); /* enable chip */
ST7565_WRITE_BYTE(0x0AC); /* static indicator off */
ST7565_WRITE_BYTE(0x000); /* indicator register set (not sure if this is required) */
ST7565_WRITE_BYTE(0x0AE); /* display off */
ST7565_WRITE_BYTE(0x0A5); /* all points on */
ST7565_CS(); /* disable chip , bugfix 12 nov 2014 */
/* end of sequence */
ST7565_NA0(); // instruction mode
ST7565_NCS(); // chip select
ST7565_SLEEP_MODE(); // static indicator off
//ST7565_WRITE_BYTE(0x00); // indicator register set (not sure if this is required)
ST7565_ON(0); // display off
ST7565_ALL_PIX(1); // all points on
ST7565_CS(); // chip select off
return 1;
case U8G_DEV_MSG_SLEEP_OFF:
ST7565_NA0(); /* instruction mode */
ST7565_NCS(); /* enable chip */
ST7565_WRITE_BYTE(0x0A4); /* all points off */
ST7565_WRITE_BYTE(0x0AF); /* display on */
U8G_ESC_DLY(50); /* delay 50 ms */
ST7565_CS(); /* disable chip , bugfix 12 nov 2014 */
/* end of sequence */
ST7565_NA0(); // instruction mode
ST7565_NCS(); // chip select
ST7565_ALL_PIX(0); // all points off
ST7565_ON(1); // display on
U8G_ESC_DLY(50); // delay 50 ms
ST7565_CS(); // chip select off
return 1;
}
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_st7565_64128n_2x_VIKI_buf[LCD_PIXEL_WIDTH*2] U8G_NOCOMMON;
uint8_t u8g_dev_st7565_64128n_2x_VIKI_buf[LCD_PIXEL_WIDTH * 2] U8G_NOCOMMON;
u8g_pb_t u8g_dev_st7565_64128n_2x_VIKI_pb = {{16, LCD_PIXEL_HEIGHT, 0, 0, 0}, LCD_PIXEL_WIDTH, u8g_dev_st7565_64128n_2x_VIKI_buf};
u8g_dev_t u8g_dev_st7565_64128n_2x_VIKI_sw_spi = {u8g_dev_st7565_64128n_2x_VIKI_fn, &u8g_dev_st7565_64128n_2x_VIKI_pb, &u8g_com_null_fn};