From d32c4efc77350a08ea4f149c0889b39da1dc75f6 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Mon, 10 Sep 2018 01:20:26 -0500
Subject: [PATCH] Fix some trailing whitespace
---
.../examples/Formbot/T-Rex_2+/Configuration_adv.h | 4 ++--
.../config/examples/Formbot/T_Rex_3/Configuration.h | 11 +++++------
.../examples/Formbot/T_Rex_3/Configuration_adv.h | 6 +++---
.../src/config/examples/Formbot/T_Rex_3/_Bootscreen.h | 1 -
4 files changed, 10 insertions(+), 12 deletions(-)
diff --git a/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration_adv.h
index abbe4604f69..a38541d25e4 100644
--- a/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration_adv.h
+++ b/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration_adv.h
@@ -1519,12 +1519,12 @@
*/
//#define CUSTOM_USER_MENUS
#if ENABLED(CUSTOM_USER_MENUS)
-//#define USER_SCRIPT_AUDIBLE_FEEDBACK
+ //#define USER_SCRIPT_AUDIBLE_FEEDBACK
#define USER_SCRIPT_RETURN // Return to status screen after a script
#define USER_DESC_1 "User cmd 1"
#define USER_GCODE_1 "G28 X \n"
-
+
#define USER_DESC_2 "User cmd 2"
#define USER_GCODE_2 "G28 \nG1 X100 \n"
diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
index 2097d16e144..78a4f5dd492 100644
--- a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
+++ b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
@@ -20,15 +20,15 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
-
+
#define TREX3 // Turn this on to generate a T-Rex 3 firmware image
// The next few options are for firmware development and probably should not be used by Formbot.
#define ICSP_PORT_SWITCHES // If ICSP_PORT_SWITCHES is defined, those pins become filament runout sensors
// (But the SD Memory card won't work and is turned off!!!)
-
+
#define ROXYs_TRex // Turn this on to get customizations only available on Roxy's T-Rex 2+
- // Marlin controlled heat bed, Max7219 debug LED's, less bright LED light level
+ // Marlin controlled heat bed, Max7219 debug LED's, less bright LED light level
// More aggressive PID numbers for hotends (due to double fans)
/**
* Configuration.h
@@ -999,11 +999,11 @@
* By default the firmware assumes HIGH=FILAMENT PRESENT.
*/
-#ifdef TREX3
+#ifdef TREX3
#define FILAMENT_RUNOUT_SENSOR
#define NUM_RUNOUT_SENSORS 2 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
#else
-//#define FILAMENT_RUNOUT_SENSOR
+ //#define FILAMENT_RUNOUT_SENSOR
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
@@ -1014,7 +1014,6 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
#define FILAMENT_RUNOUT_SCRIPT "M600"
-//#define FILAMENT_RUNOUT_SCRIPT "M601"
#endif
//===========================================================================
diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index 0da60da9658..3fd8d9666c2 100644
--- a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -365,7 +365,7 @@
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
// Mode 3 (DXC_SYMMETRIC_DUPLICATION_MODE) : Symmetric Duplication mode. The firmware will perform similarly to DXC_DUPLICATION_MODE except in a mirror
// image of the first x-carriage. ie. If you are printing a right hand shoe on the 1st extruder, you will
- // get a left hand shoe on the 2nd extruder.
+ // get a left hand shoe on the 2nd extruder.
// This is the default power-up mode which can be later using M605.
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE
@@ -1514,12 +1514,12 @@
*/
//#define CUSTOM_USER_MENUS
#if ENABLED(CUSTOM_USER_MENUS)
-//#define USER_SCRIPT_AUDIBLE_FEEDBACK
+ //#define USER_SCRIPT_AUDIBLE_FEEDBACK
#define USER_SCRIPT_RETURN // Return to status screen after a script
#define USER_DESC_1 "User cmd 1"
#define USER_GCODE_1 "G28 X \n"
-
+
#define USER_DESC_2 "User cmd 2"
#define USER_GCODE_2 "G28 \nG1 X100 \n"
diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/_Bootscreen.h b/Marlin/src/config/examples/Formbot/T_Rex_3/_Bootscreen.h
index 5bedb17160c..89c0f430915 100644
--- a/Marlin/src/config/examples/Formbot/T_Rex_3/_Bootscreen.h
+++ b/Marlin/src/config/examples/Formbot/T_Rex_3/_Bootscreen.h
@@ -102,4 +102,3 @@ B10000000,B00000011,B11000000,B00000000,B01110000,B00001110,B10000001,B11111111,
B10000000,B00000011,B11000000,B00000000,B01110000,B00000111,B00000000,B01111100,B00000011,B10000000,B00011100,B00000000,B00000001,B11100000,B00000000,B00000001,
B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111
};
-