diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 71f46bfe8a7..16f8bdee1ad 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -304,8 +304,8 @@
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
- #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
- //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
+ #if ENABLED(ADAPTIVE_FAN_SLOWING) && EITHER(MPCTEMP, PIDTEMP)
+ //#define TEMP_TUNING_MAINTAIN_FAN // Don't slow fan speed during M303 or M306 T
#endif
/**
diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
index 5ec428edf29..cf6c560b5cc 100644
--- a/Marlin/src/inc/Conditionals_post.h
+++ b/Marlin/src/inc/Conditionals_post.h
@@ -3054,7 +3054,7 @@
*/
#if !HAS_FAN
#undef ADAPTIVE_FAN_SLOWING
- #undef NO_FAN_SLOWING_IN_PID_TUNING
+ #undef TEMP_TUNING_MAINTAIN_FAN
#endif
#if !BOTH(HAS_BED_PROBE, HAS_FAN)
#undef PROBING_FANS_OFF
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index b5a37307ab3..c501c328c76 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -97,6 +97,8 @@
#error "Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS."
#elif DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD)
#error "Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED."
+#elif defined(NO_FAN_SLOWING_IN_PID_TUNING)
+ #error "NO_FAN_SLOWING_IN_PID_TUNING is now TEMP_TUNING_MAINTAIN_FAN."
#elif (CORE_IS_XZ || CORE_IS_YZ) && ENABLED(Z_LATE_ENABLE)
#error "Z_LATE_ENABLE can't be used with COREXZ, COREZX, COREYZ, or COREZY."
#elif defined(X_HOME_RETRACT_MM)
diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp
index 5d4ccc0a518..d5508401dec 100644
--- a/Marlin/src/module/temperature.cpp
+++ b/Marlin/src/module/temperature.cpp
@@ -311,7 +311,7 @@ PGMSTR(str_t_heating_failed, STR_T_HEATING_FAILED);
* public:
*/
-#if ENABLED(NO_FAN_SLOWING_IN_PID_TUNING)
+#if ENABLED(TEMP_TUNING_MAINTAIN_FAN)
bool Temperature::adaptive_fan_slowing = true;
#endif
@@ -688,7 +688,7 @@ volatile bool Temperature::raw_temps_ready = false;
LEDColor color = ONHEATINGSTART();
#endif
- TERN_(NO_FAN_SLOWING_IN_PID_TUNING, adaptive_fan_slowing = false);
+ TERN_(TEMP_TUNING_MAINTAIN_FAN, adaptive_fan_slowing = false);
LCD_MESSAGE(MSG_HEATING);
@@ -876,7 +876,7 @@ volatile bool Temperature::raw_temps_ready = false;
TERN_(DWIN_PID_TUNE, DWIN_PidTuning(PID_DONE));
EXIT_M303:
- TERN_(NO_FAN_SLOWING_IN_PID_TUNING, adaptive_fan_slowing = true);
+ TERN_(TEMP_TUNING_MAINTAIN_FAN, adaptive_fan_slowing = true);
return;
}
@@ -910,6 +910,7 @@ volatile bool Temperature::raw_temps_ready = false;
return false;
}
+ wait_for_heatup = false;
return true;
};
@@ -927,6 +928,8 @@ volatile bool Temperature::raw_temps_ready = false;
#endif
do_z_clearance(MPC_TUNING_END_Z);
+
+ TERN_(TEMP_TUNING_MAINTAIN_FAN, adaptive_fan_slowing = true);
}
} on_exit;
@@ -935,6 +938,8 @@ volatile bool Temperature::raw_temps_ready = false;
MPCHeaterInfo &hotend = temp_hotend[active_extruder];
MPC_t &mpc = hotend.mpc;
+ TERN_(TEMP_TUNING_MAINTAIN_FAN, adaptive_fan_slowing = false);
+
// Move to center of bed, just above bed height and cool with max fan
gcode.home_all_axes(true);
disable_all_heaters();
@@ -970,7 +975,6 @@ volatile bool Temperature::raw_temps_ready = false;
next_test_ms += 10000UL;
}
}
- wait_for_heatup = false;
#if HAS_FAN
set_fan_speed(EITHER(MPC_FAN_0_ALL_HOTENDS, MPC_FAN_0_ACTIVE_HOTEND) ? 0 : active_extruder, 0);
@@ -989,6 +993,7 @@ volatile bool Temperature::raw_temps_ready = false;
uint16_t sample_distance = 1;
float t1_time = 0;
+ wait_for_heatup = true;
for (;;) { // Can be interrupted with M108
if (!housekeeping(ms, current_temp, next_report_ms)) return;
@@ -1045,6 +1050,7 @@ volatile bool Temperature::raw_temps_ready = false;
#endif
float last_temp = current_temp;
+ wait_for_heatup = true;
for (;;) { // Can be interrupted with M108
if (!housekeeping(ms, current_temp, next_report_ms)) return;
@@ -4124,6 +4130,7 @@ void Temperature::isr() {
} while (wait_for_heatup && TEMP_CONDITIONS);
+ // If wait_for_heatup is set, temperature was reached, no cancel
if (wait_for_heatup) {
wait_for_heatup = false;
#if HAS_DWIN_E3V2_BASIC
@@ -4262,6 +4269,7 @@ void Temperature::isr() {
} while (wait_for_heatup && TEMP_BED_CONDITIONS);
+ // If wait_for_heatup is set, temperature was reached, no cancel
if (wait_for_heatup) {
wait_for_heatup = false;
ui.reset_status();
@@ -4340,6 +4348,7 @@ void Temperature::isr() {
}
}
+ // If wait_for_heatup is set, temperature was reached, no cancel
if (wait_for_heatup) {
wait_for_heatup = false;
ui.reset_status();
@@ -4439,6 +4448,7 @@ void Temperature::isr() {
}
} while (wait_for_heatup && TEMP_CHAMBER_CONDITIONS);
+ // If wait_for_heatup is set, temperature was reached, no cancel
if (wait_for_heatup) {
wait_for_heatup = false;
ui.reset_status();
@@ -4525,6 +4535,7 @@ void Temperature::isr() {
first_loop = false;
#endif // TEMP_COOLER_RESIDENCY_TIME > 0
+ // Prevent a wait-forever situation if R is misused i.e. M191 R0
if (wants_to_cool) {
// Break after MIN_COOLING_SLOPE_TIME_CHAMBER seconds
// if the temperature did not drop at least MIN_COOLING_SLOPE_DEG_CHAMBER
@@ -4537,7 +4548,7 @@ void Temperature::isr() {
} while (wait_for_heatup && TEMP_COOLER_CONDITIONS);
- // Prevent a wait-forever situation if R is misused i.e. M191 R0
+ // If wait_for_heatup is set, temperature was reached, no cancel
if (wait_for_heatup) {
wait_for_heatup = false;
ui.reset_status();
diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h
index 9ac5db44edf..c947a6789ab 100644
--- a/Marlin/src/module/temperature.h
+++ b/Marlin/src/module/temperature.h
@@ -1173,7 +1173,7 @@ class Temperature {
static void PID_autotune(const celsius_t target, const heater_id_t heater_id, const int8_t ncycles, const bool set_result=false);
- #if ENABLED(NO_FAN_SLOWING_IN_PID_TUNING)
+ #if ENABLED(TEMP_TUNING_MAINTAIN_FAN)
static bool adaptive_fan_slowing;
#elif ENABLED(ADAPTIVE_FAN_SLOWING)
static constexpr bool adaptive_fan_slowing = true;
diff --git a/buildroot/tests/LPC1768 b/buildroot/tests/LPC1768
index 535e776a389..2e680b60d79 100755
--- a/buildroot/tests/LPC1768
+++ b/buildroot/tests/LPC1768
@@ -40,7 +40,7 @@ opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EEB \
NOZZLE_CLEAN_MIN_TEMP 170 \
NOZZLE_CLEAN_START_POINT "{ { 10, 10, 3 }, { 10, 10, 3 } }" \
NOZZLE_CLEAN_END_POINT "{ { 10, 20, 3 }, { 10, 20, 3 } }"
-opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
+opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ADAPTIVE_FAN_SLOWING TEMP_TUNING_MAINTAIN_FAN \
FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY PID_EXTRUSION_SCALING SOUND_MENU_ITEM \
NOZZLE_AS_PROBE AUTO_BED_LEVELING_BILINEAR PREHEAT_BEFORE_LEVELING G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
ASSISTED_TRAMMING ASSISTED_TRAMMING_WIZARD REPORT_TRAMMING_MM ASSISTED_TRAMMING_WAIT_POSITION \
diff --git a/buildroot/tests/LPC1769 b/buildroot/tests/LPC1769
index 086dffffc92..ec5c824450c 100755
--- a/buildroot/tests/LPC1769
+++ b/buildroot/tests/LPC1769
@@ -18,7 +18,7 @@ opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD \
GRID_MAX_POINTS_X 16 \
NOZZLE_CLEAN_START_POINT "{ { 10, 10, 3 }, { 10, 10, 3 } }" \
NOZZLE_CLEAN_END_POINT "{ { 10, 20, 3 }, { 10, 20, 3 } }"
-opt_enable TFTGLCD_PANEL_SPI SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
+opt_enable TFTGLCD_PANEL_SPI SDSUPPORT ADAPTIVE_FAN_SLOWING TEMP_TUNING_MAINTAIN_FAN \
MAX31865_SENSOR_OHMS_0 MAX31865_CALIBRATION_OHMS_0 \
FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BED_TRAMMING_USE_PROBE BED_TRAMMING_VERIFY_RAISED \