3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-23 12:04:19 +00:00
Code Issues Releases Wiki Activity

Serial macros cleanup

Browse Source
This commit is contained in:
Scott Lahteine 2021-02-28 19:43:46 -06:00 committed by Scott Lahteine
parent f0b662ff58
commit dd42831cba
48 changed files with 101 additions and 117 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
Marlin/src/HAL/LPC1768/eeprom_sdcard.cpp
View File

@ -83,14 +83,13 @@ bool PersistentStore::access_finish() {
static void debug_rw(const bool write, int &pos, const uint8_t *value, const size_t size, const FRESULT s, const size_t total=0) {
PGM_P const rw_str = write ? PSTR("write") : PSTR("read");
SERIAL_CHAR(' ');
serialprintPGM(rw_str);
SERIAL_ECHOPGM_P(rw_str);
SERIAL_ECHOLNPAIR("_data(", pos, ",", value, ",", size, ", ...)");
if (total) {
SERIAL_ECHOPGM(" f_");
serialprintPGM(rw_str);
SERIAL_ECHOPGM_P(rw_str);
SERIAL_ECHOPAIR("()=", s, "\n size=", size, "\n bytes_");
serialprintPGM(write ? PSTR("written=") : PSTR("read="));
SERIAL_ECHOLN(total);
SERIAL_ECHOLNPAIR_P(write ? PSTR("written=") : PSTR("read="), total);
}
else
SERIAL_ECHOLNPAIR(" f_lseek()=", s);

11
Marlin/src/HAL/shared/Delay.cpp
View File

@ -109,11 +109,11 @@
void dump_delay_accuracy_check() {
auto report_call_time = [](PGM_P const name, PGM_P const unit, const uint32_t cycles, const uint32_t total, const bool do_flush=true) {
SERIAL_ECHOPGM("Calling ");
serialprintPGM(name);
SERIAL_ECHOPGM_P(name);
SERIAL_ECHOLNPAIR(" for ", cycles);
serialprintPGM(unit);
SERIAL_ECHOPGM_P(unit);
SERIAL_ECHOLNPAIR(" took: ", total);
serialprintPGM(unit);
SERIAL_ECHOPGM_P(unit);
if (do_flush) SERIAL_FLUSHTX();
};
@ -169,10 +169,7 @@
void calibrate_delay_loop() {}
#if ENABLED(MARLIN_DEV_MODE)
void dump_delay_accuracy_check() {
static PGMSTR(none, "N/A on this platform");
serialprintPGM(none);
}
void dump_delay_accuracy_check() { SERIAL_ECHOPGM_P(PSTR("N/A on this platform")); }
#endif
#endif

5
Marlin/src/MarlinCore.cpp
View File

@ -885,8 +885,7 @@ void setup() {
auto log_current_ms = [&](PGM_P const msg) {
SERIAL_ECHO_START();
SERIAL_CHAR('['); SERIAL_ECHO(millis()); SERIAL_ECHOPGM("] ");
serialprintPGM(msg);
SERIAL_EOL();
SERIAL_ECHOLNPGM_P(msg);
};
#define SETUP_LOG(M) log_current_ms(PSTR(M))
#else
@ -1003,7 +1002,7 @@ void setup() {
if (mcu & RST_SOFTWARE) SERIAL_ECHOLNPGM(STR_SOFTWARE_RESET);
HAL_clear_reset_source();
serialprintPGM(GET_TEXT(MSG_MARLIN));
SERIAL_ECHOPGM_P(GET_TEXT(MSG_MARLIN));
SERIAL_CHAR(' ');
SERIAL_ECHOLNPGM(SHORT_BUILD_VERSION);
SERIAL_EOL();

4
Marlin/src/core/debug_out.h
View File

@ -59,7 +59,7 @@
#include "debug_section.h"
#define DEBUG_SECTION(N,S,D) SectionLog N(PSTR(S),D)
#define DEBUG_PRINT_P(P) serialprintPGM(P)
#define DEBUG_ECHOPGM_P(P) SERIAL_ECHOPGM_P(P)
#define DEBUG_ECHO_START SERIAL_ECHO_START
#define DEBUG_ERROR_START SERIAL_ERROR_START
#define DEBUG_CHAR SERIAL_CHAR
@ -89,7 +89,7 @@
#else
#define DEBUG_SECTION(...) NOOP
#define DEBUG_PRINT_P(P) NOOP
#define DEBUG_ECHOPGM_P(P) NOOP
#define DEBUG_ECHO_START() NOOP
#define DEBUG_ERROR_START() NOOP
#define DEBUG_CHAR(...) NOOP

4
Marlin/src/core/debug_section.h
View File

@ -38,10 +38,10 @@ private:
bool debug;
void echo_msg(PGM_P const pre) {
serialprintPGM(pre);
SERIAL_ECHOPGM_P(pre);
if (the_msg) {
SERIAL_CHAR(' ');
serialprintPGM(the_msg);
SERIAL_ECHOPGM_P(the_msg);
}
SERIAL_CHAR(' ');
print_xyz(current_position);

6
Marlin/src/core/utility.cpp
View File

@ -92,9 +92,9 @@ void safe_delay(millis_t ms) {
SERIAL_ECHOPGM(" (Aligned With");
if (probe.offset_xy.y > 0)
serialprintPGM(ENABLED(IS_SCARA) ? PSTR("-Distal") : PSTR("-Back"));
SERIAL_ECHOPGM_P(ENABLED(IS_SCARA) ? PSTR("-Distal") : PSTR("-Back"));
else if (probe.offset_xy.y < 0)
serialprintPGM(ENABLED(IS_SCARA) ? PSTR("-Proximal") : PSTR("-Front"));
SERIAL_ECHOPGM_P(ENABLED(IS_SCARA) ? PSTR("-Proximal") : PSTR("-Front"));
else if (probe.offset_xy.x != 0)
SERIAL_ECHOPGM("-Center");
@ -102,7 +102,7 @@ void safe_delay(millis_t ms) {
#endif
serialprintPGM(probe.offset.z < 0 ? PSTR("Below") : probe.offset.z > 0 ? PSTR("Above") : PSTR("Same Z as"));
SERIAL_ECHOPGM_P(probe.offset.z < 0 ? PSTR("Below") : probe.offset.z > 0 ? PSTR("Above") : PSTR("Same Z as"));
SERIAL_ECHOLNPGM(" Nozzle)");
#endif

4
Marlin/src/feature/bedlevel/ubl/ubl.cpp
View File

@ -181,7 +181,7 @@ void unified_bed_leveling::display_map(const int map_type) {
}
else {
SERIAL_ECHOPGM(" for ");
serialprintPGM(csv ? PSTR("CSV:\n") : PSTR("LCD:\n"));
SERIAL_ECHOPGM_P(csv ? PSTR("CSV:\n") : PSTR("LCD:\n"));
}
// Add XY probe offset from extruder because probe.probe_at_point() subtracts them when
@ -212,7 +212,7 @@ void unified_bed_leveling::display_map(const int map_type) {
// TODO: Display on Graphical LCD
}
else if (isnan(f))
serialprintPGM(human ? PSTR(" . ") : PSTR("NAN"));
SERIAL_ECHOPGM_P(human ? PSTR(" . ") : PSTR("NAN"));
else if (human || csv) {
if (human && f >= 0.0) SERIAL_CHAR(f > 0 ? '+' : ' '); // Display sign also for positive numbers (' ' for 0)
SERIAL_ECHO_F(f, 3); // Positive: 5 digits, Negative: 6 digits

6
Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
View File

@ -908,11 +908,11 @@ void unified_bed_leveling::shift_mesh_height() {
if (do_ubl_mesh_map) display_map(g29_map_type); // show user where we're probing
if (parser.seen('B')) {
serialprintPGM(GET_TEXT(MSG_UBL_BC_INSERT));
SERIAL_ECHOPGM_P(GET_TEXT(MSG_UBL_BC_INSERT));
LCD_MESSAGEPGM(MSG_UBL_BC_INSERT);
}
else {
serialprintPGM(GET_TEXT(MSG_UBL_BC_INSERT2));
SERIAL_ECHOPGM_P(GET_TEXT(MSG_UBL_BC_INSERT2));
LCD_MESSAGEPGM(MSG_UBL_BC_INSERT2);
}
@ -1576,7 +1576,7 @@ void unified_bed_leveling::smart_fill_mesh() {
return normal.x * pos.x + normal.y * pos.y + zadd;
};
auto debug_pt = [](PGM_P const pre, const xy_pos_t &pos, const float &zadd) {
d_from(); serialprintPGM(pre);
d_from(); SERIAL_ECHOPGM_P(pre);
DEBUG_ECHO_F(normed(pos, zadd), 6);
DEBUG_ECHOLNPAIR_F(" Z error = ", zadd - get_z_correction(pos), 6);
};

9
Marlin/src/feature/host_actions.cpp
View File

@ -40,7 +40,7 @@
void host_action(PGM_P const pstr, const bool eol) {
PORT_REDIRECT(SERIAL_ALL);
SERIAL_ECHOPGM("//action:");
serialprintPGM(pstr);
SERIAL_ECHOPGM_P(pstr);
if (eol) SERIAL_EOL();
}
@ -86,14 +86,13 @@ void host_action(PGM_P const pstr, const bool eol) {
void host_action_notify_P(PGM_P const message) {
PORT_REDIRECT(SERIAL_ALL);
host_action(PSTR("notification "), false);
serialprintPGM(message);
SERIAL_EOL();
SERIAL_ECHOLNPGM_P(message);
}
void host_action_prompt(PGM_P const ptype, const bool eol=true) {
PORT_REDIRECT(SERIAL_ALL);
host_action(PSTR("prompt_"), false);
serialprintPGM(ptype);
SERIAL_ECHOPGM_P(ptype);
if (eol) SERIAL_EOL();
}
@ -101,7 +100,7 @@ void host_action(PGM_P const pstr, const bool eol) {
host_action_prompt(ptype, false);
PORT_REDIRECT(SERIAL_ALL);
SERIAL_CHAR(' ');
serialprintPGM(pstr);
SERIAL_ECHOPGM_P(pstr);
if (extra_char != '\0') SERIAL_CHAR(extra_char);
SERIAL_EOL();
}

2
Marlin/src/feature/max7219.cpp
View File

@ -127,7 +127,7 @@ uint8_t Max7219::suspended; // = 0;
void Max7219::error(const char * const func, const int32_t v1, const int32_t v2/*=-1*/) {
#if ENABLED(MAX7219_ERRORS)
SERIAL_ECHOPGM("??? Max7219::");
serialprintPGM(func);
SERIAL_ECHOPGM_P(func);
SERIAL_CHAR('(');
SERIAL_ECHO(v1);
if (v2 > 0) SERIAL_ECHOPAIR(", ", v2);

2
Marlin/src/feature/meatpack.cpp
View File

@ -179,7 +179,7 @@ void MeatPack::report_state() {
SERIAL_ECHOPGM("[MP] ");
SERIAL_ECHOPGM(MeatPack_ProtocolVersion " ");
serialprint_onoff(TEST(state, MPConfig_Bit_Active));
serialprintPGM(TEST(state, MPConfig_Bit_NoSpaces) ? PSTR(" NSP\n") : PSTR(" ESP\n"));
SERIAL_ECHOPGM_P(TEST(state, MPConfig_Bit_NoSpaces) ? PSTR(" NSP\n") : PSTR(" ESP\n"));
}
/**

2
Marlin/src/feature/pause.cpp
View File

@ -460,7 +460,7 @@ void show_continue_prompt(const bool is_reload) {
ui.pause_show_message(is_reload ? PAUSE_MESSAGE_INSERT : PAUSE_MESSAGE_WAITING);
SERIAL_ECHO_START();
serialprintPGM(is_reload ? PSTR(_PMSG(STR_FILAMENT_CHANGE_INSERT) "\n") : PSTR(_PMSG(STR_FILAMENT_CHANGE_WAIT) "\n"));
SERIAL_ECHOPGM_P(is_reload ? PSTR(_PMSG(STR_FILAMENT_CHANGE_INSERT) "\n") : PSTR(_PMSG(STR_FILAMENT_CHANGE_WAIT) "\n"));
}
void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep_count/*=0*/ DXC_ARGS) {

2
Marlin/src/feature/powerloss.cpp
View File

@ -531,7 +531,7 @@ void PrintJobRecovery::resume() {
#if ENABLED(DEBUG_POWER_LOSS_RECOVERY)
void PrintJobRecovery::debug(PGM_P const prefix) {
DEBUG_PRINT_P(prefix);
DEBUG_ECHOPGM_P(prefix);
DEBUG_ECHOLNPAIR(" Job Recovery Info...\nvalid_head:", info.valid_head, " valid_foot:", info.valid_foot);
if (info.valid_head) {
if (info.valid_head == info.valid_foot) {

2
Marlin/src/feature/probe_temp_comp.cpp
View File

@ -73,7 +73,7 @@ void ProbeTempComp::print_offsets() {
LOOP_L_N(s, TSI_COUNT) {
float temp = cali_info[s].start_temp;
for (int16_t i = -1; i < cali_info[s].measurements; ++i) {
serialprintPGM(s == TSI_BED ? PSTR("Bed") :
SERIAL_ECHOPGM_P(s == TSI_BED ? PSTR("Bed") :
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
s == TSI_EXT ? PSTR("Extruder") :
#endif

8
Marlin/src/feature/runout.h
View File

@ -287,7 +287,7 @@ class FilamentSensorBase {
if (out != was_out) {
was_out = out;
SERIAL_ECHOPGM("Filament ");
serialprintPGM(out ? PSTR("OUT\n") : PSTR("IN\n"));
SERIAL_ECHOPGM_P(out ? PSTR("OUT\n") : PSTR("IN\n"));
}
#endif
}
@ -320,10 +320,8 @@ class FilamentSensorBase {
const millis_t ms = millis();
if (ELAPSED(ms, t)) {
t = millis() + 1000UL;
LOOP_L_N(i, EXTRUDERS) {
serialprintPGM(i ? PSTR(", ") : PSTR("Remaining mm: "));
SERIAL_ECHO(runout_mm_countdown[i]);
}
LOOP_L_N(i, EXTRUDERS)
SERIAL_ECHOPAIR_P(i ? PSTR(", ") : PSTR("Remaining mm: "), runout_mm_countdown[i]);
SERIAL_EOL();
}
#endif

6
Marlin/src/feature/tmc_util.cpp
View File

@ -546,7 +546,7 @@
};
template<class TMC>
static void print_vsense(TMC &st) { serialprintPGM(st.vsense() ? PSTR("1=.18") : PSTR("0=.325")); }
static void print_vsense(TMC &st) { SERIAL_ECHOPGM_P(st.vsense() ? PSTR("1=.18") : PSTR("0=.325")); }
#if HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC5130)
static void _tmc_status(TMC2130Stepper &st, const TMC_debug_enum i) {
@ -717,7 +717,7 @@
SERIAL_ECHO(st.cs());
SERIAL_ECHOPGM("/31");
break;
case TMC_VSENSE: serialprintPGM(st.vsense() ? PSTR("1=.165") : PSTR("0=.310")); break;
case TMC_VSENSE: SERIAL_ECHOPGM_P(st.vsense() ? PSTR("1=.165") : PSTR("0=.310")); break;
case TMC_MICROSTEPS: SERIAL_ECHO(st.microsteps()); break;
//case TMC_OTPW: serialprint_truefalse(st.otpw()); break;
//case TMC_OTPW_TRIGGERED: serialprint_truefalse(st.getOTPW()); break;
@ -1208,7 +1208,7 @@ static bool test_connection(TMC &st) {
case 1: stat = PSTR("HIGH"); break;
case 2: stat = PSTR("LOW"); break;
}
serialprintPGM(stat);
SERIAL_ECHOPGM_P(stat);
SERIAL_EOL();
return test_result;

4
Marlin/src/feature/twibus.cpp
View File

@ -83,7 +83,7 @@ void TWIBus::send() {
// static
void TWIBus::echoprefix(uint8_t bytes, const char pref[], uint8_t adr) {
SERIAL_ECHO_START();
serialprintPGM(pref);
SERIAL_ECHOPGM_P(pref);
SERIAL_ECHOPAIR(": from:", adr, " bytes:", bytes, " data:");
}
@ -172,7 +172,7 @@ void TWIBus::flush() {
// static
void TWIBus::prefix(const char func[]) {
SERIAL_ECHOPGM("TWIBus::");
serialprintPGM(func);
SERIAL_ECHOPGM_P(func);
SERIAL_ECHOPGM(": ");
}
void TWIBus::debug(const char func[], uint32_t adr) {

2
Marlin/src/gcode/bedlevel/G35.cpp
View File

@ -114,7 +114,7 @@ void GcodeSuite::G35() {
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOPAIR("Probing point ", i, " (");
DEBUG_PRINT_P((char *)pgm_read_ptr(&tramming_point_name[i]));
DEBUG_ECHOPGM_P((char *)pgm_read_ptr(&tramming_point_name[i]));
DEBUG_CHAR(')');
DEBUG_ECHOLNPAIR_P(SP_X_STR, screws_tilt_adjust_pos[i].x, SP_Y_STR, screws_tilt_adjust_pos[i].y, SP_Z_STR, z_probed_height);
}

2
Marlin/src/gcode/bedlevel/abl/G29.cpp
View File

@ -786,7 +786,7 @@ G29_TYPE GcodeSuite::G29() {
float min_diff = 999;
auto print_topo_map = [&](PGM_P const title, const bool get_min) {
serialprintPGM(title);
SERIAL_ECHOPGM_P(title);
for (int8_t yy = abl_grid_points.y - 1; yy >= 0; yy--) {
LOOP_L_N(xx, abl_grid_points.x) {
const int ind = indexIntoAB[xx][yy];

2
Marlin/src/gcode/calibrate/G28.cpp
View File

@ -259,7 +259,7 @@ void GcodeSuite::G28() {
#if HAS_HOMING_CURRENT
auto debug_current = [](PGM_P const s, const int16_t a, const int16_t b){
serialprintPGM(s); DEBUG_ECHOLNPAIR(" current: ", a, " -> ", b);
DEBUG_ECHOPGM_P(s); DEBUG_ECHOLNPAIR(" current: ", a, " -> ", b);
};
#if HAS_CURRENT_HOME(X)
const int16_t tmc_save_current_X = stepperX.getMilliamps();

6
Marlin/src/gcode/calibrate/G33.cpp
View File

@ -93,7 +93,7 @@ void ac_cleanup(TERN_(HAS_MULTI_HOTEND, const uint8_t old_tool_index)) {
void print_signed_float(PGM_P const prefix, const float &f) {
SERIAL_ECHOPGM(" ");
serialprintPGM(prefix);
SERIAL_ECHOPGM_P(prefix);
SERIAL_CHAR(':');
if (f >= 0) SERIAL_CHAR('+');
SERIAL_ECHO_F(f, 2);
@ -449,7 +449,7 @@ void GcodeSuite::G33() {
// Report settings
PGM_P const checkingac = PSTR("Checking... AC");
serialprintPGM(checkingac);
SERIAL_ECHOPGM_P(checkingac);
if (verbose_level == 0) SERIAL_ECHOPGM(" (DRY-RUN)");
SERIAL_EOL();
ui.set_status_P(checkingac);
@ -625,7 +625,7 @@ void GcodeSuite::G33() {
}
else { // dry run
PGM_P const enddryrun = PSTR("End DRY-RUN");
serialprintPGM(enddryrun);
SERIAL_ECHOPGM_P(enddryrun);
SERIAL_ECHO_SP(35);
SERIAL_ECHOLNPAIR_F("std dev:", zero_std_dev, 3);

2
Marlin/src/gcode/calibrate/M852.cpp
View File

@ -93,7 +93,7 @@ void GcodeSuite::M852() {
if (!ijk) {
SERIAL_ECHO_START();
serialprintPGM(GET_TEXT(MSG_SKEW_FACTOR));
SERIAL_ECHOPGM_P(GET_TEXT(MSG_SKEW_FACTOR));
SERIAL_ECHOPAIR_F(" XY: ", planner.skew_factor.xy, 6);
#if ENABLED(SKEW_CORRECTION_FOR_Z)
SERIAL_ECHOPAIR_F(" XZ: ", planner.skew_factor.xz, 6);

2
Marlin/src/gcode/config/M217.cpp
View File

@ -36,7 +36,7 @@
void M217_report(const bool eeprom=false) {
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
serialprintPGM(eeprom ? PSTR(" M217") : PSTR("Toolchange:"));
SERIAL_ECHOPGM_P(eeprom ? PSTR(" M217") : PSTR("Toolchange:"));
SERIAL_ECHOPAIR(" S", LINEAR_UNIT(toolchange_settings.swap_length));
SERIAL_ECHOPAIR_P(SP_B_STR, LINEAR_UNIT(toolchange_settings.extra_resume),
SP_E_STR, LINEAR_UNIT(toolchange_settings.extra_prime),

2
Marlin/src/gcode/config/M302.cpp
View File

@ -55,7 +55,7 @@ void GcodeSuite::M302() {
// Report current state
SERIAL_ECHO_START();
SERIAL_ECHOPGM("Cold extrudes are ");
serialprintPGM(thermalManager.allow_cold_extrude ? PSTR("en") : PSTR("dis"));
SERIAL_ECHOPGM_P(thermalManager.allow_cold_extrude ? PSTR("en") : PSTR("dis"));
SERIAL_ECHOLNPAIR("abled (min temp ", thermalManager.extrude_min_temp, "C)");
}
}

2
Marlin/src/gcode/config/M43.cpp
View File

@ -303,7 +303,7 @@ void GcodeSuite::M43() {
if (parser.seen('E')) {
endstops.monitor_flag = parser.value_bool();
SERIAL_ECHOPGM("endstop monitor ");
serialprintPGM(endstops.monitor_flag ? PSTR("en") : PSTR("dis"));
SERIAL_ECHOPGM_P(endstops.monitor_flag ? PSTR("en") : PSTR("dis"));
SERIAL_ECHOLNPGM("abled");
return;
}

2
Marlin/src/gcode/control/M111.cpp
View File

@ -49,7 +49,7 @@ void GcodeSuite::M111() {
LOOP_L_N(i, COUNT(debug_strings)) {
if (TEST(marlin_debug_flags, i)) {
if (comma++) SERIAL_CHAR(',');
serialprintPGM((char*)pgm_read_ptr(&debug_strings[i]));
SERIAL_ECHOPGM_P((char*)pgm_read_ptr(&debug_strings[i]));
}
}
}

2
Marlin/src/gcode/control/M80_M81.cpp
View File

@ -56,7 +56,7 @@
// S: Report the current power supply state and exit
if (parser.seen('S')) {
serialprintPGM(powersupply_on ? PSTR("PS:1\n") : PSTR("PS:0\n"));
SERIAL_ECHOPGM_P(powersupply_on ? PSTR("PS:1\n") : PSTR("PS:0\n"));
return;
}

12
Marlin/src/gcode/feature/L6470/M122.cpp
View File

@ -41,16 +41,16 @@ inline void L6470_say_status(const L64XX_axis_t axis) {
SERIAL_ECHO(temp_buf);
print_bin(sh.STATUS_AXIS_RAW);
switch (sh.STATUS_AXIS_LAYOUT) {
case L6470_STATUS_LAYOUT: serialprintPGM(PSTR(" L6470")); break;
case L6474_STATUS_LAYOUT: serialprintPGM(PSTR(" L6474")); break;
case L6480_STATUS_LAYOUT: serialprintPGM(PSTR(" L6480/powerSTEP01")); break;
case L6470_STATUS_LAYOUT: SERIAL_ECHOPGM(" L6470"); break;
case L6474_STATUS_LAYOUT: SERIAL_ECHOPGM(" L6474"); break;
case L6480_STATUS_LAYOUT: SERIAL_ECHOPGM(" L6480/powerSTEP01"); break;
}
#endif
SERIAL_ECHOPGM("\n...OUTPUT: ");
serialprintPGM(sh.STATUS_AXIS & STATUS_HIZ ? PSTR("OFF") : PSTR("ON "));
SERIAL_ECHOPGM_P(sh.STATUS_AXIS & STATUS_HIZ ? PSTR("OFF") : PSTR("ON "));
SERIAL_ECHOPGM(" BUSY: "); echo_yes_no((sh.STATUS_AXIS & STATUS_BUSY) == 0);
SERIAL_ECHOPGM(" DIR: ");
serialprintPGM((((sh.STATUS_AXIS & STATUS_DIR) >> 4) ^ L64xxManager.index_to_dir[axis]) ? PSTR("FORWARD") : PSTR("REVERSE"));
SERIAL_ECHOPGM_P((((sh.STATUS_AXIS & STATUS_DIR) >> 4) ^ L64xxManager.index_to_dir[axis]) ? PSTR("FORWARD") : PSTR("REVERSE"));
if (sh.STATUS_AXIS_LAYOUT == L6480_STATUS_LAYOUT) {
SERIAL_ECHOPGM(" Last Command: ");
if (sh.STATUS_AXIS & sh.STATUS_AXIS_WRONG_CMD) SERIAL_ECHOPGM("VALID");
@ -67,7 +67,7 @@ inline void L6470_say_status(const L64XX_axis_t axis) {
SERIAL_ECHOPGM(" Last Command: ");
if (!(sh.STATUS_AXIS & sh.STATUS_AXIS_WRONG_CMD)) SERIAL_ECHOPGM("IN");
SERIAL_ECHOPGM("VALID ");
serialprintPGM(sh.STATUS_AXIS & sh.STATUS_AXIS_NOTPERF_CMD ? PSTR("COMPLETED ") : PSTR("Not PERFORMED"));
SERIAL_ECHOPGM_P(sh.STATUS_AXIS & sh.STATUS_AXIS_NOTPERF_CMD ? PSTR("COMPLETED ") : PSTR("Not PERFORMED"));
SERIAL_ECHOPAIR("\n...THERMAL: ", !(sh.STATUS_AXIS & sh.STATUS_AXIS_TH_SD) ? "SHUTDOWN " : !(sh.STATUS_AXIS & sh.STATUS_AXIS_TH_WRN) ? "WARNING " : "OK ");
}
SERIAL_ECHOPGM(" OVERCURRENT:"); echo_yes_no((sh.STATUS_AXIS & sh.STATUS_AXIS_OCD) == 0);

2
Marlin/src/gcode/feature/L6470/M906.cpp
View File

@ -132,7 +132,7 @@ void L64XX_report_current(L64XX &motor, const L64XX_axis_t axis) {
SERIAL_ECHOPAIR("...MicroSteps: ", MicroSteps,
" ADC_OUT: ", L6470_ADC_out);
SERIAL_ECHOPGM(" Vs_compensation: ");
serialprintPGM((motor.GetParam(sh.L6470_AXIS_CONFIG) & CONFIG_EN_VSCOMP) ? PSTR("ENABLED ") : PSTR("DISABLED"));
SERIAL_ECHOPGM_P((motor.GetParam(sh.L6470_AXIS_CONFIG) & CONFIG_EN_VSCOMP) ? PSTR("ENABLED ") : PSTR("DISABLED"));
SERIAL_ECHOLNPAIR(" Compensation coefficient: ~", comp_coef * 0.01f);
SERIAL_ECHOPAIR("...KVAL_HOLD: ", motor.GetParam(L6470_KVAL_HOLD),

2
Marlin/src/gcode/feature/powerloss/M1000.cpp
View File

@ -40,7 +40,7 @@ void menu_job_recovery();
inline void plr_error(PGM_P const prefix) {
#if ENABLED(DEBUG_POWER_LOSS_RECOVERY)
DEBUG_ECHO_START();
serialprintPGM(prefix);
DEBUG_ECHOPGM_P(prefix);
DEBUG_ECHOLNPGM(" Job Recovery Data");
#else
UNUSED(prefix);

4
Marlin/src/gcode/feature/powerloss/M413.cpp
View File

@ -54,8 +54,8 @@ void GcodeSuite::M413() {
#if PIN_EXISTS(POWER_LOSS)
if (parser.seen('O')) recovery._outage();
#endif
if (parser.seen('E')) serialprintPGM(recovery.exists() ? PSTR("PLR Exists\n") : PSTR("No PLR\n"));
if (parser.seen('V')) serialprintPGM(recovery.valid() ? PSTR("Valid\n") : PSTR("Invalid\n"));
if (parser.seen('E')) SERIAL_ECHOPGM_P(recovery.exists() ? PSTR("PLR Exists\n") : PSTR("No PLR\n"));
if (parser.seen('V')) SERIAL_ECHOPGM_P(recovery.valid() ? PSTR("Valid\n") : PSTR("Invalid\n"));
#endif
}

3
Marlin/src/gcode/feature/trinamic/M569.cpp
View File

@ -32,8 +32,7 @@ template<typename TMC>
void tmc_say_stealth_status(TMC &st) {
st.printLabel();
SERIAL_ECHOPGM(" driver mode:\t");
serialprintPGM(st.get_stealthChop() ? PSTR("stealthChop") : PSTR("spreadCycle"));
SERIAL_EOL();
SERIAL_ECHOLNPGM_P(st.get_stealthChop() ? PSTR("stealthChop") : PSTR("spreadCycle"));
}
template<typename TMC>
void tmc_set_stealthChop(TMC &st, const bool enable) {

2
Marlin/src/gcode/geometry/G17-G19.cpp
View File

@ -29,7 +29,7 @@
inline void report_workspace_plane() {
SERIAL_ECHO_START();
SERIAL_ECHOPGM("Workspace Plane ");
serialprintPGM(
SERIAL_ECHOPGM_P(
gcode.workspace_plane == GcodeSuite::PLANE_YZ ? PSTR("YZ\n")
: gcode.workspace_plane == GcodeSuite::PLANE_ZX ? PSTR("ZX\n")
: PSTR("XY\n")

4
Marlin/src/gcode/host/M115.cpp
View File

@ -34,8 +34,8 @@
#if ENABLED(EXTENDED_CAPABILITIES_REPORT)
static void cap_line(PGM_P const name, bool ena=false) {
SERIAL_ECHOPGM("Cap:");
serialprintPGM(name);
SERIAL_CHAR(':', ena ? '1' : '0');
SERIAL_ECHOPGM_P(name);
SERIAL_CHAR(':', '0' + ena);
SERIAL_EOL();
}
#endif

5
Marlin/src/gcode/host/M360.cpp
View File

@ -34,10 +34,9 @@
static void config_prefix(PGM_P const name, PGM_P const pref=nullptr, const int8_t ind=-1) {
SERIAL_ECHOPGM("Config:");
if (pref) serialprintPGM(pref);
if (pref) SERIAL_ECHOPGM_P(pref);
if (ind >= 0) { SERIAL_ECHO(ind); SERIAL_CHAR(':'); }
serialprintPGM(name);
SERIAL_CHAR(':');
SERIAL_ECHOPAIR_P(name, AS_CHAR(':'));
}
static void config_line(PGM_P const name, const float val, PGM_P const pref=nullptr, const int8_t ind=-1) {
config_prefix(name, pref, ind);

3
Marlin/src/gcode/queue.cpp
View File

@ -304,8 +304,7 @@ inline int read_serial(const uint8_t index) { return SERIAL_IMPL.read(index); }
void GCodeQueue::gcode_line_error(PGM_P const err, const serial_index_t serial_ind) {
PORT_REDIRECT(SERIAL_PORTMASK(serial_ind)); // Reply to the serial port that sent the command
SERIAL_ERROR_START();
SERIAL_ECHOPGM_P(err);
SERIAL_ECHOLN(serial_state[serial_ind].last_N);
SERIAL_ECHOLNPAIR_P(err, serial_state[serial_ind].last_N);
while (read_serial(serial_ind) != -1) { /* nada */ } // Clear out the RX buffer. Why don't use flush here ?
flush_and_request_resend();
serial_state[serial_ind].count = 0;

2
Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.cpp
View File

@ -290,7 +290,7 @@ namespace Anycubic {
void ChironTFT::SendtoTFT(PGM_P str) { // A helper to print PROGMEN string to the panel
#if ACDEBUG(AC_SOME)
serialprintPGM(str);
SERIAL_ECHOPGM_P(str);
#endif
while (const char c = pgm_read_byte(str++)) TFTSer.write(c);
}

8
Marlin/src/libs/L64XX/L64XX_Marlin.cpp
View File

@ -37,8 +37,6 @@ L64XX_Marlin L64xxManager;
#include "../../module/planner.h"
#include "../../HAL/shared/Delay.h"
void echo_yes_no(const bool yes) { serialprintPGM(yes ? PSTR(" YES") : PSTR(" NO ")); }
static const char str_X[] PROGMEM = "X ", str_Y[] PROGMEM = "Y ", str_Z[] PROGMEM = "Z ",
str_X2[] PROGMEM = "X2", str_Y2[] PROGMEM = "Y2",
str_Z2[] PROGMEM = "Z2", str_Z3[] PROGMEM = "Z3", str_Z4[] PROGMEM = "Z4",
@ -56,6 +54,8 @@ PGM_P const L64XX_Marlin::index_to_axis[] PROGMEM = {
#define DEBUG_OUT ENABLED(L6470_CHITCHAT)
#include "../../core/debug_out.h"
void echo_yes_no(const bool yes) { DEBUG_ECHOPGM_P(yes ? PSTR(" YES") : PSTR(" NO ")); UNUSED(yes); }
uint8_t L64XX_Marlin::dir_commands[MAX_L64XX]; // array to hold direction command for each driver
const uint8_t L64XX_Marlin::index_to_dir[MAX_L64XX] = {
@ -375,7 +375,7 @@ inline void echo_min_max(const char a, const float &min, const float &max) {
}
inline void echo_oct_used(const float &oct, const uint8_t stall) {
DEBUG_ECHOPAIR("over_current_threshold used : ", oct);
serialprintPGM(stall ? PSTR(" (Stall") : PSTR(" (OCD"));
DEBUG_ECHOPGM_P(stall ? PSTR(" (Stall") : PSTR(" (OCD"));
DEBUG_ECHOLNPGM(" threshold)");
}
inline void err_out_of_bounds() { DEBUG_ECHOLNPGM("Test aborted - motion out of bounds"); }
@ -652,7 +652,7 @@ void L64XX_Marlin::say_axis(const L64XX_axis_t axis, const uint8_t label/*=true*
) {
say_axis(axis);
DEBUG_ECHOPGM(" THERMAL: ");
serialprintPGM((status & _status_axis_th_sd) ? PSTR("SHUTDOWN") : (status & _status_axis_th_wrn) ? PSTR("WARNING ") : PSTR("OK "));
DEBUG_ECHOPGM_P((status & _status_axis_th_sd) ? PSTR("SHUTDOWN") : (status & _status_axis_th_wrn) ? PSTR("WARNING ") : PSTR("OK "));
DEBUG_ECHOPGM(" OVERCURRENT: ");
echo_yes_no((status & _status_axis_ocd) != 0);
if (!(_status_axis_layout == L6474_STATUS_LAYOUT)) { // L6474 doesn't have these bits

2
Marlin/src/libs/stopwatch.cpp
View File

@ -98,7 +98,7 @@ millis_t Stopwatch::duration() {
void Stopwatch::debug(const char func[]) {
if (DEBUGGING(INFO)) {
SERIAL_ECHOPGM("Stopwatch::");
serialprintPGM(func);
SERIAL_ECHOPGM_P(func);
SERIAL_ECHOLNPGM("()");
}
}

7
Marlin/src/libs/vector_3.cpp
View File

@ -77,7 +77,7 @@ void vector_3::apply_rotation(const matrix_3x3 &matrix) {
}
void vector_3::debug(PGM_P const title) {
serialprintPGM(title);
SERIAL_ECHOPGM_P(title);
SERIAL_ECHOPAIR_F_P(SP_X_STR, x, 6);
SERIAL_ECHOPAIR_F_P(SP_Y_STR, y, 6);
SERIAL_ECHOLNPAIR_F_P(SP_Z_STR, z, 6);
@ -139,10 +139,7 @@ matrix_3x3 matrix_3x3::transpose(const matrix_3x3 &original) {
}
void matrix_3x3::debug(PGM_P const title) {
if (title) {
serialprintPGM(title);
SERIAL_EOL();
}
if (title) SERIAL_ECHOLNPGM_P(title);
LOOP_L_N(i, 3) {
LOOP_L_N(j, 3) {
if (vectors[i][j] >= 0.0) SERIAL_CHAR('+');

5
Marlin/src/module/endstops.cpp
View File

@ -405,10 +405,9 @@ void Endstops::event_handler() {
}
static void print_es_state(const bool is_hit, PGM_P const label=nullptr) {
if (label) serialprintPGM(label);
if (label) SERIAL_ECHOPGM_P(label);
SERIAL_ECHOPGM(": ");
serialprintPGM(is_hit ? PSTR(STR_ENDSTOP_HIT) : PSTR(STR_ENDSTOP_OPEN));
SERIAL_EOL();
SERIAL_ECHOLNPGM_P(is_hit ? PSTR(STR_ENDSTOP_HIT) : PSTR(STR_ENDSTOP_OPEN));
}
void _O2 Endstops::report_states() {

2
Marlin/src/module/planner.cpp
View File

@ -2973,7 +2973,7 @@ inline void limit_and_warn(float &val, const uint8_t axis, PGM_P const setting_n
if (before != val) {
SERIAL_CHAR(axis_codes[lim_axis]);
SERIAL_ECHOPGM(" Max ");
serialprintPGM(setting_name);
SERIAL_ECHOPGM_P(setting_name);
SERIAL_ECHOLNPAIR(" limited to ", val);
}
}

6
Marlin/src/module/printcounter.cpp
View File

@ -118,7 +118,7 @@ void PrintCounter::initStats() {
inline bool _service_warn(const char * const msg) {
_print_divider();
SERIAL_ECHO_START();
serialprintPGM(msg);
SERIAL_ECHOPGM_P(msg);
SERIAL_ECHOLNPGM("!");
_print_divider();
return true;
@ -177,7 +177,7 @@ void PrintCounter::saveStats() {
#if HAS_SERVICE_INTERVALS
inline void _service_when(char buffer[], const char * const msg, const uint32_t when) {
SERIAL_ECHOPGM(STR_STATS);
serialprintPGM(msg);
SERIAL_ECHOPGM_P(msg);
SERIAL_ECHOLNPAIR(" in ", duration_t(when).toString(buffer));
}
#endif
@ -339,7 +339,7 @@ void PrintCounter::reset() {
void PrintCounter::debug(const char func[]) {
if (DEBUGGING(INFO)) {
SERIAL_ECHOPGM("PrintCounter::");
serialprintPGM(func);
SERIAL_ECHOPGM_P(func);
SERIAL_ECHOLNPGM("()");
}
}

5
Marlin/src/module/probe.cpp
View File

@ -279,8 +279,7 @@ FORCE_INLINE void probe_specific_action(const bool deploy) {
PGM_P const ds_str = deploy ? GET_TEXT(MSG_MANUAL_DEPLOY) : GET_TEXT(MSG_MANUAL_STOW);
ui.return_to_status(); // To display the new status message
ui.set_status_P(ds_str, 99);
serialprintPGM(ds_str);
SERIAL_EOL();
SERIAL_ECHOLNPGM_P(ds_str);
TERN_(HOST_PROMPT_SUPPORT, host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Stow Probe"), CONTINUE_STR));
TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired_P(PSTR("Stow Probe")));
@ -586,7 +585,7 @@ float Probe::run_z_probe(const bool sanity_check/*=true*/) {
early_fail = (scheck && current_position.z > -offset.z + clearance); // Probe triggered too high?
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING) && (probe_fail || early_fail)) {
DEBUG_PRINT_P(plbl);
DEBUG_ECHOPGM_P(plbl);
DEBUG_ECHOPGM(" Probe fail! -");
if (probe_fail) DEBUG_ECHOPGM(" No trigger.");
if (early_fail) DEBUG_ECHOPGM(" Triggered early.");

12
Marlin/src/module/settings.cpp
View File

@ -2990,7 +2990,7 @@ void MarlinSettings::reset() {
if (!repl) {
SERIAL_ECHO_START();
SERIAL_ECHOPGM("; ");
serialprintPGM(pstr);
SERIAL_ECHOPGM_P(pstr);
if (eol) SERIAL_EOL();
}
}
@ -3007,7 +3007,7 @@ void MarlinSettings::reset() {
SERIAL_ECHOPGM(" M569 S1");
if (etc) {
SERIAL_CHAR(' ');
serialprintPGM(etc);
SERIAL_ECHOPGM_P(etc);
}
if (newLine) SERIAL_EOL();
}
@ -3025,7 +3025,7 @@ void MarlinSettings::reset() {
#endif
inline void say_units(const bool colon) {
serialprintPGM(
SERIAL_ECHOPGM_P(
#if ENABLED(INCH_MODE_SUPPORT)
parser.linear_unit_factor != 1.0 ? PSTR(" (in)") :
#endif
@ -3066,7 +3066,7 @@ void MarlinSettings::reset() {
SERIAL_ECHOPGM(" M149 ");
SERIAL_CHAR(parser.temp_units_code());
SERIAL_ECHOPGM(" ; Units in ");
serialprintPGM(parser.temp_units_name());
SERIAL_ECHOPGM_P(parser.temp_units_name());
#else
SERIAL_ECHOLNPGM(" M149 C ; Units in Celsius");
#endif
@ -3254,12 +3254,12 @@ void MarlinSettings::reset() {
LOOP_L_N(py, GRID_MAX_POINTS_Y) {
LOOP_L_N(px, GRID_MAX_POINTS_X) {
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(PSTR(" G29 S3 I"), px, PSTR(" J"), py);
SERIAL_ECHOPAIR(" G29 S3 I", px, " J", py);
SERIAL_ECHOLNPAIR_F_P(SP_Z_STR, LINEAR_UNIT(mbl.z_values[px][py]), 5);
}
}
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_F_P(PSTR(" G29 S4 Z"), LINEAR_UNIT(mbl.z_offset), 5);
SERIAL_ECHOLNPAIR_F(" G29 S4 Z", LINEAR_UNIT(mbl.z_offset), 5);
}
#elif ENABLED(AUTO_BED_LEVELING_UBL)

10
Marlin/src/module/temperature.cpp
View File

@ -664,9 +664,9 @@ volatile bool Temperature::raw_temps_ready = false;
#if EITHER(PIDTEMPBED, PIDTEMPCHAMBER)
PGM_P const estring = GHV(PSTR("chamber"), PSTR("bed"), NUL_STR);
say_default_(); serialprintPGM(estring); SERIAL_ECHOLNPAIR("Kp ", tune_pid.Kp);
say_default_(); serialprintPGM(estring); SERIAL_ECHOLNPAIR("Ki ", tune_pid.Ki);
say_default_(); serialprintPGM(estring); SERIAL_ECHOLNPAIR("Kd ", tune_pid.Kd);
say_default_(); SERIAL_ECHOPGM_P(estring); SERIAL_ECHOLNPAIR("Kp ", tune_pid.Kp);
say_default_(); SERIAL_ECHOPGM_P(estring); SERIAL_ECHOLNPAIR("Ki ", tune_pid.Ki);
say_default_(); SERIAL_ECHOPGM_P(estring); SERIAL_ECHOLNPAIR("Kd ", tune_pid.Kd);
#else
say_default_(); SERIAL_ECHOLNPAIR("Kp ", tune_pid.Kp);
say_default_(); SERIAL_ECHOLNPAIR("Ki ", tune_pid.Ki);
@ -868,7 +868,7 @@ void Temperature::_temp_error(const heater_id_t heater_id, PGM_P const serial_ms
if (IsRunning() && TERN1(BOGUS_TEMPERATURE_GRACE_PERIOD, killed == 2)) {
SERIAL_ERROR_START();
serialprintPGM(serial_msg);
SERIAL_ECHOPGM_P(serial_msg);
SERIAL_ECHOPGM(STR_STOPPED_HEATER);
if (heater_id >= 0)
SERIAL_ECHO(heater_id);
@ -1532,7 +1532,7 @@ void Temperature::manage_heater() {
SERIAL_ECHOPAIR_F_P(SP_B_STR, t.beta, 1);
SERIAL_ECHOPAIR_F_P(SP_C_STR, t.sh_c_coeff, 9);
SERIAL_ECHOPGM(" ; ");
serialprintPGM(
SERIAL_ECHOPGM_P(
TERN_(TEMP_SENSOR_0_IS_CUSTOM, t_index == CTI_HOTEND_0 ? PSTR("HOTEND 0") :)
TERN_(TEMP_SENSOR_1_IS_CUSTOM, t_index == CTI_HOTEND_1 ? PSTR("HOTEND 1") :)
TERN_(TEMP_SENSOR_2_IS_CUSTOM, t_index == CTI_HOTEND_2 ? PSTR("HOTEND 2") :)

10
Marlin/src/pins/pinsDebug.h
View File

@ -238,7 +238,7 @@ const PinInfo pin_array[] PROGMEM = {
#endif
static void print_input_or_output(const bool isout) {
serialprintPGM(isout ? PSTR("Output = ") : PSTR("Input = "));
SERIAL_ECHOPGM_P(isout ? PSTR("Output = ") : PSTR("Input = "));
}
// pretty report with PWM info
@ -266,8 +266,8 @@ inline void report_pin_state_extended(pin_t pin, const bool ignore, const bool e
LOOP_L_N(x, COUNT(pin_array)) { // scan entire array and report all instances of this pin
if (GET_ARRAY_PIN(x) == pin) {
if (!found) { // report digital and analog pin number only on the first time through
if (start_string) serialprintPGM(start_string);
serialprintPGM(PSTR("PIN: "));
if (start_string) SERIAL_ECHOPGM_P(start_string);
SERIAL_ECHOPGM("PIN: ");
PRINT_PIN(pin);
PRINT_PORT(pin);
if (int8_t(DIGITAL_PIN_TO_ANALOG_PIN(pin)) >= 0) {
@ -317,8 +317,8 @@ inline void report_pin_state_extended(pin_t pin, const bool ignore, const bool e
} // end of for loop
if (!found) {
if (start_string) serialprintPGM(start_string);
serialprintPGM(PSTR("PIN: "));
if (start_string) SERIAL_ECHOPGM_P(start_string);
SERIAL_ECHOPGM("PIN: ");
PRINT_PIN(pin);
PRINT_PORT(pin);
if (int8_t(DIGITAL_PIN_TO_ANALOG_PIN(pin)) >= 0) {

4
Marlin/src/sd/cardreader.cpp
View File

@ -552,7 +552,7 @@ void announceOpen(const uint8_t doing, const char * const path) {
PORT_REDIRECT(SERIAL_ALL);
SERIAL_ECHO_START();
SERIAL_ECHOPGM("Now ");
serialprintPGM(doing == 1 ? PSTR("doing") : PSTR("fresh"));
SERIAL_ECHOPGM_P(doing == 1 ? PSTR("doing") : PSTR("fresh"));
SERIAL_ECHOLNPAIR(" file: ", path);
}
}
@ -1251,7 +1251,7 @@ void CardReader::fileHasFinished() {
removeFile(recovery.filename);
#if ENABLED(DEBUG_POWER_LOSS_RECOVERY)
SERIAL_ECHOPGM("Power-loss file delete");
serialprintPGM(jobRecoverFileExists() ? PSTR(" failed.\n") : PSTR("d.\n"));
SERIAL_ECHOPGM_P(jobRecoverFileExists() ? PSTR(" failed.\n") : PSTR("d.\n"));
#endif
}
}