From e37a1ded0d0606ca0840ef9d44c6b8ab94e798fb Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Tue, 26 Sep 2017 23:49:08 -0500
Subject: [PATCH] Increase BABYSTEP_MULTIPLICATOR to 100
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
---
Marlin/Configuration_adv.h | 8 ++++----
.../AlephObjects/TAZ4/Configuration_adv.h | 8 ++++----
Marlin/example_configurations/Anet/A6/Configuration_adv.h | 6 +++---
Marlin/example_configurations/Anet/A8/Configuration_adv.h | 8 ++++----
.../BQ/Hephestos/Configuration_adv.h | 8 ++++----
.../BQ/Hephestos_2/Configuration_adv.h | 8 ++++----
.../example_configurations/BQ/WITBOX/Configuration_adv.h | 8 ++++----
.../example_configurations/Cartesio/Configuration_adv.h | 8 ++++----
Marlin/example_configurations/Felix/Configuration_adv.h | 8 ++++----
.../Infitary/i3-M508/Configuration_adv.h | 8 ++++----
.../Malyan/M150/Configuration_adv.h | 8 ++++----
.../example_configurations/RigidBot/Configuration_adv.h | 8 ++++----
Marlin/example_configurations/SCARA/Configuration_adv.h | 8 ++++----
.../Sanguinololu/Configuration_adv.h | 8 ++++----
.../example_configurations/TinyBoy2/Configuration_adv.h | 8 ++++----
.../Velleman/K8200/Configuration_adv.h | 8 ++++----
.../Velleman/K8400/Configuration_adv.h | 8 ++++----
.../delta/FLSUN/kossel_mini/Configuration_adv.h | 8 ++++----
.../delta/generic/Configuration_adv.h | 8 ++++----
.../delta/kossel_mini/Configuration_adv.h | 8 ++++----
.../delta/kossel_pro/Configuration_adv.h | 8 ++++----
.../delta/kossel_xl/Configuration_adv.h | 8 ++++----
Marlin/example_configurations/makibox/Configuration_adv.h | 8 ++++----
.../tvrrug/Round2/Configuration_adv.h | 8 ++++----
Marlin/example_configurations/wt150/Configuration_adv.h | 8 ++++----
25 files changed, 99 insertions(+), 99 deletions(-)
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 2ca25194eec..217452482f9 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
index a13ee782ec3..827010e71f9 100644
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
index 65c3d5de3ab..2a1ba65176a 100644
--- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
@@ -602,9 +602,9 @@
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
index c45bbb1bc6b..37069356893 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
index 11f2a6f37c1..9918a0ee2f7 100644
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
index a7022dc2f19..2fc64e8d90a 100644
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
index 11f2a6f37c1..9918a0ee2f7 100644
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index ba36abe8abe..5c59a77096d 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index 14f4505a28d..c7c4722a93a 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
index e0d95b7fff0..255f3a80baa 100644
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
index 0e96feb0afd..d71ff470b11 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index 9235ab2053c..545072f23aa 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index c4c8b371529..de00ef7f7a1 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
index b9a7cca4f60..fc866090114 100644
--- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
@@ -590,10 +590,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
index 9d0d24888c7..1a2413c42fb 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
index fbbf602caa1..5e7166488f8 100644
--- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
@@ -614,10 +614,10 @@
*/
#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
index e3622028d6c..f2822fc1346 100644
--- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
index 51811311483..b4cfa950e99 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -603,10 +603,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index 51811311483..b4cfa950e99 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -603,10 +603,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index 51811311483..b4cfa950e99 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -603,10 +603,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index 3f2180eb09d..d8aa82d95fb 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -608,10 +608,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index edc24a8d60e..92badf46928 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -603,10 +603,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index a72fa661be7..39fac017509 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index 267293196c6..8b36164d433 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h
index 48c57534b83..3b2d5f0a40b 100644
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@@ -601,10 +601,10 @@
*/
//#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
- //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
- #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
- #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
+ //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.