From d38e335272c3358a6dabe2a0fa71d1224f73c7ba Mon Sep 17 00:00:00 2001 From: esenapaj Date: Mon, 2 Jan 2017 01:19:33 +0900 Subject: [PATCH] From "microseconds" to "milliseconds" delay() is milliseconds --- Marlin/Configuration.h | 2 +- Marlin/example_configurations/Cartesio/Configuration.h | 2 +- Marlin/example_configurations/Felix/Configuration.h | 2 +- Marlin/example_configurations/Felix/DUAL/Configuration.h | 2 +- Marlin/example_configurations/Hephestos/Configuration.h | 2 +- Marlin/example_configurations/Hephestos_2/Configuration.h | 2 +- Marlin/example_configurations/K8200/Configuration.h | 2 +- Marlin/example_configurations/K8400/Configuration.h | 2 +- Marlin/example_configurations/K8400/Dual-head/Configuration.h | 2 +- .../RepRapWorld/Megatronics/Configuration.h | 2 +- Marlin/example_configurations/RigidBot/Configuration.h | 2 +- Marlin/example_configurations/SCARA/Configuration.h | 2 +- Marlin/example_configurations/TAZ4/Configuration.h | 2 +- Marlin/example_configurations/WITBOX/Configuration.h | 2 +- Marlin/example_configurations/adafruit/ST7565/Configuration.h | 2 +- Marlin/example_configurations/delta/generic/Configuration.h | 2 +- Marlin/example_configurations/delta/kossel_mini/Configuration.h | 2 +- Marlin/example_configurations/delta/kossel_pro/Configuration.h | 2 +- Marlin/example_configurations/delta/kossel_xl/Configuration.h | 2 +- Marlin/example_configurations/makibox/Configuration.h | 2 +- Marlin/example_configurations/tvrrug/Round2/Configuration.h | 2 +- 21 files changed, 21 insertions(+), 21 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 14747dc2677..afaa2c6288f 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -1420,7 +1420,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h index 254b643ca8d..821e0eb961e 100644 --- a/Marlin/example_configurations/Cartesio/Configuration.h +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -1420,7 +1420,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 8d92d2ed118..a4e06462ce6 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -1403,7 +1403,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index e31a4c61c28..5ec0b13d37f 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -1403,7 +1403,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index ccdb6f90479..71753a444e2 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -1412,7 +1412,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h index 0b2535e8168..aa87903c152 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration.h @@ -1414,7 +1414,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index a198b89e736..8be3bb2bc27 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -1454,7 +1454,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/K8400/Configuration.h b/Marlin/example_configurations/K8400/Configuration.h index fd29b7be0d2..c89b748b290 100644 --- a/Marlin/example_configurations/K8400/Configuration.h +++ b/Marlin/example_configurations/K8400/Configuration.h @@ -1420,7 +1420,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/K8400/Dual-head/Configuration.h index 679e31122ac..0ad032ad4ae 100644 --- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h +++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h @@ -1420,7 +1420,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index e3572329d46..75a22d358f8 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -1420,7 +1420,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index 93e30cb35a8..cadbe320429 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -1421,7 +1421,7 @@ // #define NUM_SERVOS 0 // DGlass3D - Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 44fd9447337..9809ecab600 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -1435,7 +1435,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h index 48fab945a84..4edb45389a2 100644 --- a/Marlin/example_configurations/TAZ4/Configuration.h +++ b/Marlin/example_configurations/TAZ4/Configuration.h @@ -1441,7 +1441,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index cf1eb3ec06e..a8bb07b4397 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -1412,7 +1412,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index 42d4413457c..e68dba9d557 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -1420,7 +1420,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index 107c327415e..4c968713baa 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -1507,7 +1507,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 7fc217f3081..da6484430fe 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -1510,7 +1510,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index d6732f7afad..fa64c060c1c 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -1509,7 +1509,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index 87628e057a1..6aca74cff1f 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -1513,7 +1513,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index da5cb6c50a9..56ce7b01e19 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -1423,7 +1423,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300 diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 3ed8a6d6717..b2c247a4b97 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -1416,7 +1416,7 @@ // //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command -// Delay (in microseconds) before the next move will start, to give the servo time to reach its target angle. +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY 300