3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-02 16:59:03 +00:00
Code Issues Releases Wiki Activity

🩹 Media Change followup (#24302)

Browse Source 
Followup to #24015
This commit is contained in:
ellensp 2022-06-07 18:59:21 +12:00 committed by Scott Lahteine
parent b659bb2a52
commit e5fb6ace4c
11 changed files with 42 additions and 35 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/HAL/SAMD51/HAL.cpp
View File

@ -598,7 +598,7 @@ void MarlinHAL::dma_init() {
void MarlinHAL::init() {
TERN_(DMA_IS_REQUIRED, dma_init());
#if ENABLED(SDSUPPORT)
#if SD_CONNECTION_IS(ONBOARD) && PIN_EXISTS(SD_DETECT)
#if HAS_SD_DETECT && SD_CONNECTION_IS(ONBOARD)
SET_INPUT_PULLUP(SD_DETECT_PIN);
#endif
OUT_WRITE(SDSS, HIGH); // Try to set SDSS inactive before any other SPI users start up

32
Marlin/src/inc/Conditionals_post.h
View File

@ -435,20 +435,28 @@
#define HAS_SHARED_MEDIA 1
#endif
// Set SD_DETECT_STATE based on hardware if not overridden
#if PIN_EXISTS(SD_DETECT) && !defined(SD_DETECT_STATE)
#if BOTH(HAS_MARLINUI_MENU, ELB_FULL_GRAPHIC_CONTROLLER) && (SD_CONNECTION_IS(LCD) || !defined(SDCARD_CONNECTION))
#define SD_DETECT_STATE HIGH
#else
#define SD_DETECT_STATE LOW
#endif
#endif
// Extender cable doesn't support SD_DETECT_PIN
#if ENABLED(NO_SD_DETECT)
#undef SD_DETECT_PIN
#endif
// Not onboard or custom cable
#if SD_CONNECTION_IS(LCD) || !defined(SDCARD_CONNECTION)
#define SD_CONNECTION_TYPICAL 1
#endif
// Set SD_DETECT_STATE based on hardware if not overridden
#if PIN_EXISTS(SD_DETECT)
#define HAS_SD_DETECT 1
#ifndef SD_DETECT_STATE
#if ALL(SD_CONNECTION_TYPICAL, HAS_MARLINUI_MENU, ELB_FULL_GRAPHIC_CONTROLLER)
#define SD_DETECT_STATE HIGH
#else
#define SD_DETECT_STATE LOW
#endif
#endif
#endif
#if DISABLED(USB_FLASH_DRIVE_SUPPORT) || BOTH(MULTI_VOLUME, VOLUME_SD_ONBOARD)
#if ENABLED(SDIO_SUPPORT)
#define NEED_SD2CARD_SDIO 1
@ -457,10 +465,10 @@
#endif
#endif
#endif
#if HAS_SD_DETECT && NONE(HAS_GRAPHICAL_TFT, LCD_USE_DMA_FSMC, HAS_FSMC_GRAPHICAL_TFT, HAS_SPI_GRAPHICAL_TFT, IS_DWIN_MARLINUI, EXTENSIBLE_UI, HAS_DWIN_E3V2)
#define REINIT_NOISY_LCD 1 // Have the LCD re-init on SD insertion
#endif
#if PIN_EXISTS(SD_DETECT) && NONE(HAS_GRAPHICAL_TFT, LCD_USE_DMA_FSMC, HAS_FSMC_GRAPHICAL_TFT, HAS_SPI_GRAPHICAL_TFT, IS_DWIN_MARLINUI, EXTENSIBLE_UI, HAS_DWIN_E3V2)
#define REINIT_NOISY_LCD 1 // Have the LCD re-init on SD insertion
#endif
/**

3
Marlin/src/inc/SanityCheck.h
View File

@ -879,9 +879,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
/**
* SD Card Settings
*/
#if ALL(SDSUPPORT, ELB_FULL_GRAPHIC_CONTROLLER, HAS_MARLINUI_MENU) && PIN_EXISTS(SD_DETECT) && SD_DETECT_STATE != HIGH && (SD_CONNECTION_IS(LCD) || !defined(SDCARD_CONNECTION))
#if ALL(SDSUPPORT, HAS_SD_DETECT, SD_CONNECTION_TYPICAL, ELB_FULL_GRAPHIC_CONTROLLER, HAS_MARLINUI_MENU) && SD_DETECT_STATE == LOW
#error "SD_DETECT_STATE must be set HIGH for SD on the ELB_FULL_GRAPHIC_CONTROLLER."
#endif
#undef SD_CONNECTION_TYPICAL
/**
* SD File Sorting

4
Marlin/src/lcd/extui/anycubic_i3mega/anycubic_i3mega_lcd.cpp
View File

@ -86,7 +86,7 @@ void AnycubicTFTClass::OnSetup() {
delay_ms(10);
// Init the state of the key pins running on the TFT
#if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT)
#if BOTH(SDSUPPORT, HAS_SD_DETECT)
SET_INPUT_PULLUP(SD_DETECT_PIN);
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
@ -916,7 +916,7 @@ void AnycubicTFTClass::GetCommandFromTFT() {
}
void AnycubicTFTClass::DoSDCardStateCheck() {
#if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT)
#if BOTH(SDSUPPORT, HAS_SD_DETECT)
bool isInserted = isMediaInserted();
if (isInserted)
SENDLINE_DBG_PGM("J00", "TFT Serial Debug: SD card state changed... isInserted");

4
Marlin/src/lcd/extui/dgus_reloaded/DGUSRxHandler.cpp
View File

@ -47,9 +47,7 @@ void DGUSRxHandler::ScreenChange(DGUS_VP &vp, void *data_ptr) {
if (vp.addr == DGUS_Addr::SCREENCHANGE_SD) {
#if ENABLED(SDSUPPORT)
#if !PIN_EXISTS(SD_DETECT)
card.mount();
#endif
IF_DISABLED(HAS_SD_DETECT, card.mount());
if (!ExtUI::isMediaInserted()) {
dgus_screen_handler.SetStatusMessage(GET_TEXT_F(MSG_NO_MEDIA));

3
Marlin/src/lcd/extui/mks_ui/tft_lvgl_configuration.cpp
View File

@ -137,8 +137,7 @@ void tft_lvgl_init() {
uint16_t usb_flash_loop = 1000;
#if ENABLED(MULTI_VOLUME) && !HAS_SD_HOST_DRIVE
SET_INPUT_PULLUP(SD_DETECT_PIN);
if (READ(SD_DETECT_PIN) == LOW) card.changeMedia(&card.media_driver_sdcard);
else card.changeMedia(&card.media_driver_usbFlash);
card.changeMedia(IS_SD_INSERTED() ? &card.media_driver_sdcard : &card.media_driver_usbFlash);
#endif
do {
card.media_driver_usbFlash.idle();

2
Marlin/src/lcd/marlinui.cpp
View File

@ -1756,7 +1756,7 @@ void MarlinUI::init() {
if (old_status < 2) {
#if ENABLED(EXTENSIBLE_UI)
ExtUI::onMediaRemoved();
#elif PIN_EXISTS(SD_DETECT)
#elif HAS_SD_DETECT
LCD_MESSAGE(MSG_MEDIA_REMOVED);
#if HAS_MARLINUI_MENU
if (!defer_return_to_status) return_to_status();

4
Marlin/src/lcd/menu/menu_main.cpp
View File

@ -246,7 +246,7 @@ void menu_main() {
if (card_detected) {
if (!card_open) {
#if PIN_EXISTS(SD_DETECT)
#if HAS_SD_DETECT
GCODES_ITEM(MSG_CHANGE_MEDIA, F("M21")); // M21 Change Media
#else // - or -
ACTION_ITEM(MSG_RELEASE_MEDIA, []{ // M22 Release Media
@ -262,7 +262,7 @@ void menu_main() {
}
}
else {
#if PIN_EXISTS(SD_DETECT)
#if HAS_SD_DETECT
ACTION_ITEM(MSG_NO_MEDIA, nullptr); // "No Media"
#else
GCODES_ITEM(MSG_ATTACH_MEDIA, F("M21")); // M21 Attach Media

2
Marlin/src/lcd/menu/menu_media.cpp
View File

@ -122,7 +122,7 @@ void menu_media_filelist() {
BACK_ITEM_F(TERN1(BROWSE_MEDIA_ON_INSERT, screen_history_depth) ? GET_TEXT_F(MSG_MAIN) : GET_TEXT_F(MSG_BACK));
#endif
if (card.flag.workDirIsRoot) {
#if !PIN_EXISTS(SD_DETECT)
#if !HAS_SD_DETECT
ACTION_ITEM(MSG_REFRESH, []{ encoderTopLine = 0; card.mount(); });
#endif
}

19
Marlin/src/sd/cardreader.cpp
View File

@ -171,7 +171,7 @@ CardReader::CardReader() {
workDirDepth = 0;
ZERO(workDirParents);
#if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT)
#if BOTH(SDSUPPORT, HAS_SD_DETECT)
SET_INPUT_PULLUP(SD_DETECT_PIN);
#endif
@ -456,10 +456,11 @@ void CardReader::mount() {
if (flag.mounted)
cdroot();
#if ENABLED(USB_FLASH_DRIVE_SUPPORT) || PIN_EXISTS(SD_DETECT)
else if (marlin_state != MF_INITIALIZING)
LCD_ALERTMESSAGE(MSG_MEDIA_INIT_FAIL);
#endif
else {
#if EITHER(HAS_SD_DETECT, USB_FLASH_DRIVE_SUPPORT)
if (marlin_state != MF_INITIALIZING) LCD_ALERTMESSAGE(MSG_MEDIA_INIT_FAIL);
#endif
}
ui.refresh();
}
@ -496,15 +497,15 @@ void CardReader::manage_media() {
if (TERN1(SD_IGNORE_AT_STARTUP, old_stat != 2)) mount();
if (!isMounted()) { // Not mounted?
stat = 0;
IF_DISABLED(SD_IGNORE_AT_STARTUP, prev_stat = 0);
#if HAS_SD_DETECT && DISABLED(SD_IGNORE_AT_STARTUP)
prev_stat = 0;
#endif
}
TERN_(RESET_STEPPERS_ON_MEDIA_INSERT, reset_stepper_drivers()); // Workaround for Cheetah bug
}
else {
#if PIN_EXISTS(SD_DETECT)
release(); // Card is released
#endif
TERN_(HAS_SD_DETECT, release()); // Card is released
}
ui.media_changed(old_stat, stat); // Update the UI or flag an error

2
Marlin/src/sd/cardreader.h
View File

@ -362,7 +362,7 @@ private:
#if ENABLED(USB_FLASH_DRIVE_SUPPORT)
#define IS_SD_INSERTED() DiskIODriver_USBFlash::isInserted()
#elif PIN_EXISTS(SD_DETECT)
#elif HAS_SD_DETECT
#define IS_SD_INSERTED() (READ(SD_DETECT_PIN) == SD_DETECT_STATE)
#else
// No card detect line? Assume the card is inserted.